3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-15 02:37:51 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Added min_layer_height, max_layer_height per nozzle settings

Browse source 
for controlling the support layer height & variable layer height.
Added an experimental "rear" seam option.
This commit is contained in:
bubnikv 2017-02-07 18:46:02 +01:00
parent 64c752ff9d
commit 957803e60c
4 changed files with 64 additions and 19 deletions
Download patch file Download diff file Expand all files Collapse all files

28
xs/src/libslic3r/PrintConfig.cpp
View file

@ -618,6 +618,18 @@ PrintConfigDef::PrintConfigDef()
def->max = 100;
def->default_value = new ConfigOptionInt(100);
def = this->add("max_layer_height", coFloats);
def->label = "Max";
def->tooltip = "This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter.";
def->sidetext = "mm";
def->cli = "max-layer-height=f@";
def->min = 0;
{
ConfigOptionFloats* opt = new ConfigOptionFloats();
opt->values.push_back(0);
def->default_value = opt;
}
def = this->add("max_print_speed", coFloat);
def->label = "Max print speed";
def->tooltip = "When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow.";
@ -661,6 +673,18 @@ PrintConfigDef::PrintConfigDef()
def->max = 100;
def->default_value = new ConfigOptionInt(35);
def = this->add("min_layer_height", coFloats);
def->label = "Min";
def->tooltip = "This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm.";
def->sidetext = "mm";
def->cli = "min-layer-height=f@";
def->min = 0;
{
ConfigOptionFloats* opt = new ConfigOptionFloats();
opt->values.push_back(0.07);
def->default_value = opt;
}
def = this->add("min_print_speed", coFloat);
def->label = "Min print speed";
def->tooltip = "Slic3r will not scale speed down below this speed.";
@ -942,11 +966,11 @@ PrintConfigDef::PrintConfigDef()
def->enum_values.push_back("random");
def->enum_values.push_back("nearest");
def->enum_values.push_back("aligned");
// def->enum_values.push_back("preferred");
def->enum_values.push_back("rear");
def->enum_labels.push_back("Random");
def->enum_labels.push_back("Nearest");
def->enum_labels.push_back("Aligned");
// def->enum_labels.push_back("Preferred Direction");
def->enum_labels.push_back("Rear");
def->default_value = new ConfigOptionEnum<SeamPosition>(spAligned);
#if 0