3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-06 22:47:32 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Fix #9439 - IS Calib - Use default Filament MVS (#9703)

Browse source 
IS Calib - Use default Filament MVS

To fix #9439 added a comment in wiki and remove Max Volumetric Speed overload.

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
This commit is contained in:
Ian Bassi 2025-06-01 02:38:09 -03:00 • committed by GitHub
parent 6423d521cd
commit 9565f39c7a
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
3 changed files with 44 additions and 43 deletions
Download patch file Download diff file Expand all files Collapse all files

10
doc/Calibration.md
View file

@ -176,7 +176,9 @@ Ussualy the recommended values modes are ``MZV`` or ``EI`` for Delta printers.
1. Pre-requisites:
1. In OrcaSlicer, set:
1. Acceleration high enough to trigger ringing (e.g., 2000 mm/s²).
2. Speed high enough to trigger ringing (e.g., 100 mm/s).
2. Speed high enough to trigger ringing (e.g., 200 mm/s).
> [!NOTE]
> These settings depend on your printer's motion ability and the filament's max volumetric speed. If you can't reach speeds that cause ringing, try increasing the filament's max volumetric speed (avoid materials below 10 mm³/s).
3. Jerk [Klipper Square Corner Velocity](https://www.klipper3d.org/Kinematics.html?h=square+corner+velocity#look-ahead) to 5 or a high value (e.g., 20).
2. In printer settigs:
1. Set the Shaper Type to ``MZV`` or ``EI``.
@ -223,8 +225,10 @@ ZV Input Shaping introduces an anti-vibration signal into the stepper motion for
1. Pre-requisites:
1. In OrcaSlicer, set:
1. Acceleration high enough to trigger ringing (e.g., 2000 mm/s²).
2. Speed high enough to trigger ringing (e.g., 100 mm/s).
3. Jerk
2. Speed high enough to trigger ringing (e.g., 200 mm/s).
> [!NOTE]
> These settings depend on your printer's motion ability and the filament's max volumetric speed. If you can't reach speeds that cause ringing, try increasing the filament's max volumetric speed (avoid materials below 10 mm³/s).
4. Jerk
1. If using [Classic Jerk](https://marlinfw.org/docs/configuration/configuration.html#jerk-) use a high value (e.g., 20).
2. If using [Junction Deviation](https://marlinfw.org/docs/features/junction_deviation.html) (new Marlin default mode) this test will use 0.25 (high enough to most printers).
2. Use an opaque, high-gloss filament to make the ringing more visible.

0
doc/images/InputShaping/IS_freq_menu.png.png → doc/images/InputShaping/IS_freq_menu.png
View file

Side by side Swipe Overlay

Before

Width:  |  Height:  |  Size: 8.7 KiB

After

Width:  |  Height:  |  Size: 8.7 KiB

Before After
Before After

3
src/slic3r/GUI/Plater.cpp
View file

@ -10186,7 +10186,6 @@ void Plater::calib_VFA(const Calib_Params& params)
auto print_config = &wxGetApp().preset_bundle->prints.get_edited_preset().config;
auto filament_config = &wxGetApp().preset_bundle->filaments.get_edited_preset().config;
filament_config->set_key_value("slow_down_layer_time", new ConfigOptionFloats { 0.0 });
filament_config->set_key_value("filament_max_volumetric_speed", new ConfigOptionFloats { 200 });
print_config->set_key_value("enable_overhang_speed", new ConfigOptionBool { false });
print_config->set_key_value("timelapse_type", new ConfigOptionEnum<TimelapseType>(tlTraditional));
print_config->set_key_value("wall_loops", new ConfigOptionInt(1));
@ -10233,7 +10232,6 @@ void Plater::calib_input_shaping_freq(const Calib_Params& params)
filament_config->set_key_value("slow_down_layer_time", new ConfigOptionFloats { 0.0 });
filament_config->set_key_value("slow_down_min_speed", new ConfigOptionFloats { 0.0 });
filament_config->set_key_value("slow_down_for_layer_cooling", new ConfigOptionBools{false});
filament_config->set_key_value("filament_max_volumetric_speed", new ConfigOptionFloats { 200 });
filament_config->set_key_value("enable_pressure_advance", new ConfigOptionBools {false });
filament_config->set_key_value("pressure_advance", new ConfigOptionFloats { 0.0 });
print_config->set_key_value("layer_height", new ConfigOptionFloat(0.2));
@ -10280,7 +10278,6 @@ void Plater::calib_input_shaping_damp(const Calib_Params& params)
filament_config->set_key_value("slow_down_layer_time", new ConfigOptionFloats { 0.0 });
filament_config->set_key_value("slow_down_min_speed", new ConfigOptionFloats { 0.0 });
filament_config->set_key_value("slow_down_for_layer_cooling", new ConfigOptionBools{false});
filament_config->set_key_value("filament_max_volumetric_speed", new ConfigOptionFloats { 200 });
filament_config->set_key_value("enable_pressure_advance", new ConfigOptionBools{false});
filament_config->set_key_value("pressure_advance", new ConfigOptionFloats{0.0});
print_config->set_key_value("layer_height", new ConfigOptionFloat(0.2));