diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index e41acdb0db..42c647fc76 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -1,13142 +1,13170 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-02 19:55+0100\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" - -msgid "Supports Painting" -msgstr "" - -msgid "Alt + Mouse wheel" -msgstr "" - -msgid "Section view" -msgstr "" - -msgid "Reset direction" -msgstr "" - -msgid "Ctrl + Mouse wheel" -msgstr "" - -msgid "Pen size" -msgstr "" - -msgid "Left mouse button" -msgstr "" - -msgid "Enforce supports" -msgstr "" - -msgid "Right mouse button" -msgstr "" - -msgid "Block supports" -msgstr "" - -msgid "Shift + Left mouse button" -msgstr "" - -msgid "Erase" -msgstr "" - -msgid "Erase all painting" -msgstr "" - -msgid "Highlight overhang areas" -msgstr "" - -msgid "Gap fill" -msgstr "" - -msgid "Perform" -msgstr "" - -msgid "Gap area" -msgstr "" - -msgid "Tool type" -msgstr "" - -msgid "Smart fill angle" -msgstr "" - -msgid "On overhangs only" -msgstr "" - -msgid "Auto support threshold angle: " -msgstr "" - -msgid "Circle" -msgstr "" - -msgid "Sphere" -msgstr "" - -msgid "Fill" -msgstr "" - -msgid "Gap Fill" -msgstr "" - -#, possible-boost-format -msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "" - -msgid "Highlight faces according to overhang angle." -msgstr "" - -msgid "No auto support" -msgstr "" - -msgid "Support Generated" -msgstr "" - -msgid "Gizmo-Place on Face" -msgstr "" - -msgid "Lay on face" -msgstr "" - -#, possible-boost-format -msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " -"the first %1% filaments will be available in painting tool." -msgstr "" - -msgid "Color Painting" -msgstr "" - -msgid "Pen shape" -msgstr "" - -msgid "Paint" -msgstr "" - -msgid "Key 1~9" -msgstr "" - -msgid "Choose filament" -msgstr "" - -msgid "Edge detection" -msgstr "" - -msgid "Triangles" -msgstr "" - -msgid "Filaments" -msgstr "" - -msgid "Brush" -msgstr "" - -msgid "Smart fill" -msgstr "" - -msgid "Bucket fill" -msgstr "" - -msgid "Height range" -msgstr "" - -msgid "Alt + Shift + Enter" -msgstr "" - -msgid "Toggle Wireframe" -msgstr "" - -msgid "Shortcut Key " -msgstr "" - -msgid "Triangle" -msgstr "" - -msgid "Height Range" -msgstr "" - -msgid "Vertical" -msgstr "" - -msgid "Horizontal" -msgstr "" - -msgid "Remove painted color" -msgstr "" - -#, possible-boost-format -msgid "Painted using: Filament %1%" -msgstr "" - -msgid "Move" -msgstr "" - -msgid "Gizmo-Move" -msgstr "" - -msgid "Rotate" -msgstr "" - -msgid "Gizmo-Rotate" -msgstr "" - -msgid "Optimize orientation" -msgstr "" - -msgid "Apply" -msgstr "" - -msgid "Scale" -msgstr "" - -msgid "Gizmo-Scale" -msgstr "" - -msgid "Error: Please close all toolbar menus first" -msgstr "" - -msgid "in" -msgstr "" - -msgid "mm" -msgstr "" - -msgid "Position" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "" - -msgid "Scale ratios" -msgstr "" - -msgid "Object Operations" -msgstr "" - -msgid "Volume Operations" -msgstr "" - -msgid "Translate" -msgstr "" - -msgid "Group Operations" -msgstr "" - -msgid "Set Position" -msgstr "" - -msgid "Set Orientation" -msgstr "" - -msgid "Set Scale" -msgstr "" - -msgid "Reset Position" -msgstr "" - -msgid "Reset Rotation" -msgstr "" - -msgid "World coordinates" -msgstr "" - -msgid "°" -msgstr "" - -#. TRN - Input label. Be short as possible -msgid "Size" -msgstr "" - -msgid "%" -msgstr "" - -msgid "uniform scale" -msgstr "" - -msgid "Planar" -msgstr "" - -msgid "Dovetail" -msgstr "" - -msgid "Auto" -msgstr "" - -msgid "Manual" -msgstr "" - -msgid "Plug" -msgstr "" - -msgid "Dowel" -msgstr "" - -msgid "Snap" -msgstr "" - -msgid "Prism" -msgstr "" - -msgid "Frustum" -msgstr "" - -msgid "Square" -msgstr "" - -msgid "Hexagon" -msgstr "" - -msgid "Keep orientation" -msgstr "" - -msgid "Place on cut" -msgstr "" - -msgid "Flip upside down" -msgstr "" - -msgid "Connectors" -msgstr "" - -msgid "Type" -msgstr "" - -msgid "Style" -msgstr "" - -msgid "Shape" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Size in emboss direction -#. TRN - Input label. Be short as possible -msgid "Depth" -msgstr "" - -msgid "Groove" -msgstr "" - -msgid "Width" -msgstr "" - -msgid "Flap Angle" -msgstr "" - -msgid "Groove Angle" -msgstr "" - -msgid "Part" -msgstr "" - -msgid "Object" -msgstr "" - -msgid "" -"Click to flip the cut plane\n" -"Drag to move the cut plane" -msgstr "" - -msgid "" -"Click to flip the cut plane\n" -"Drag to move the cut plane\n" -"Right-click a part to assign it to the other side" -msgstr "" - -msgid "Move cut plane" -msgstr "" - -msgid "Mode" -msgstr "" - -msgid "Change cut mode" -msgstr "" - -msgid "Tolerance" -msgstr "" - -msgid "Drag" -msgstr "" - -msgid "Draw cut line" -msgstr "" - -msgid "Left click" -msgstr "" - -msgid "Add connector" -msgstr "" - -msgid "Right click" -msgstr "" - -msgid "Remove connector" -msgstr "" - -msgid "Move connector" -msgstr "" - -msgid "Add connector to selection" -msgstr "" - -msgid "Remove connector from selection" -msgstr "" - -msgid "Select all connectors" -msgstr "" - -msgid "Cut" -msgstr "" - -msgid "Rotate cut plane" -msgstr "" - -msgid "Remove connectors" -msgstr "" - -msgid "Bulge" -msgstr "" - -msgid "Bulge proportion related to radius" -msgstr "" - -msgid "Space" -msgstr "" - -msgid "Space proportion related to radius" -msgstr "" - -msgid "Confirm connectors" -msgstr "" - -msgid "Cancel" -msgstr "" - -msgid "Build Volume" -msgstr "" - -msgid "Flip cut plane" -msgstr "" - -msgid "Groove change" -msgstr "" - -msgid "Reset" -msgstr "" - -#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. -msgid "Edited" -msgstr "" - -msgid "Cut position" -msgstr "" - -msgid "Reset cutting plane" -msgstr "" - -msgid "Edit connectors" -msgstr "" - -msgid "Add connectors" -msgstr "" - -msgid "Reset cut" -msgstr "" - -msgid "Reset cutting plane and remove connectors" -msgstr "" - -msgid "Upper part" -msgstr "" - -msgid "Lower part" -msgstr "" - -msgid "Keep" -msgstr "" - -msgid "Flip" -msgstr "" - -msgid "After cut" -msgstr "" - -msgid "Cut to parts" -msgstr "" - -msgid "Perform cut" -msgstr "" - -msgid "Warning" -msgstr "" - -msgid "Invalid connectors detected" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%1$d connector is out of cut contour" -msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "" -msgstr[1] "" - -#, possible-c-format, possible-boost-format -msgid "%1$d connector is out of object" -msgid_plural "%1$d connectors are out of object" -msgstr[0] "" -msgstr[1] "" - -msgid "Some connectors are overlapped" -msgstr "" - -msgid "Select at least one object to keep after cutting." -msgstr "" - -msgid "Cut plane is placed out of object" -msgstr "" - -msgid "Cut plane with groove is invalid" -msgstr "" - -msgid "Connector" -msgstr "" - -msgid "Cut by Plane" -msgstr "" - -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "" - -msgid "Repairing model object" -msgstr "" - -msgid "Cut by line" -msgstr "" - -msgid "Delete connector" -msgstr "" - -msgid "Mesh name" -msgstr "" - -msgid "Detail level" -msgstr "" - -msgid "Decimate ratio" -msgstr "" - -#, possible-boost-format -msgid "" -"Processing model '%1%' with more than 1M triangles could be slow. It is " -"highly recommended to simplify the model." -msgstr "" - -msgid "Simplify model" -msgstr "" - -msgid "Simplify" -msgstr "" - -msgid "Simplification is currently only allowed when a single part is selected" -msgstr "" - -msgid "Error" -msgstr "" - -msgid "Extra high" -msgstr "" - -msgid "High" -msgstr "" - -msgid "Medium" -msgstr "" - -msgid "Low" -msgstr "" - -msgid "Extra low" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%d triangles" -msgstr "" - -msgid "Show wireframe" -msgstr "" - -#, possible-boost-format -msgid "%1%" -msgstr "" - -msgid "Can't apply when proccess preview." -msgstr "" - -msgid "Operation already cancelling. Please wait few seconds." -msgstr "" - -msgid "Face recognition" -msgstr "" - -msgid "Perform Recognition" -msgstr "" - -msgid "Brush size" -msgstr "" - -msgid "Brush shape" -msgstr "" - -msgid "Enforce seam" -msgstr "" - -msgid "Block seam" -msgstr "" - -msgid "Seam painting" -msgstr "" - -msgid "Remove selection" -msgstr "" - -msgid "Entering Seam painting" -msgstr "" - -msgid "Leaving Seam painting" -msgstr "" - -msgid "Paint-on seam editing" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Select look of letter shape -msgid "Font" -msgstr "" - -msgid "Thickness" -msgstr "" - -msgid "Text Gap" -msgstr "" - -msgid "Angle" -msgstr "" - -msgid "" -"Embeded\n" -"depth" -msgstr "" - -msgid "Input text" -msgstr "" - -msgid "Surface" -msgstr "" - -msgid "Horizontal text" -msgstr "" - -msgid "Shift + Mouse move up or dowm" -msgstr "" - -msgid "Rotate text" -msgstr "" - -msgid "Text shape" -msgstr "" - -#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe -msgid "Text rotate" -msgstr "" - -#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface -msgid "Text move" -msgstr "" - -msgid "Set Mirror" -msgstr "" - -msgid "Embossed text" -msgstr "" - -msgid "Enter emboss gizmo" -msgstr "" - -msgid "Leave emboss gizmo" -msgstr "" - -msgid "Embossing actions" -msgstr "" - -msgid "Emboss" -msgstr "" - -msgid "NORMAL" -msgstr "" - -msgid "SMALL" -msgstr "" - -msgid "ITALIC" -msgstr "" - -msgid "SWISS" -msgstr "" - -msgid "MODERN" -msgstr "" - -msgid "First font" -msgstr "" - -msgid "Default font" -msgstr "" - -msgid "Advanced" -msgstr "" - -msgid "" -"The text cannot be written using the selected font. Please try choosing a " -"different font." -msgstr "" - -msgid "Embossed text cannot contain only white spaces." -msgstr "" - -msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "" - -msgid "Text input doesn't show font skew." -msgstr "" - -msgid "Text input doesn't show font boldness." -msgstr "" - -msgid "Text input doesn't show gap between lines." -msgstr "" - -msgid "Too tall, diminished font height inside text input." -msgstr "" - -msgid "Too small, enlarged font height inside text input." -msgstr "" - -msgid "Text doesn't show current horizontal alignment." -msgstr "" - -msgid "Revert font changes." -msgstr "" - -#, possible-boost-format -msgid "Font \"%1%\" can't be selected." -msgstr "" - -msgid "Operation" -msgstr "" - -msgid "Join" -msgstr "" - -msgid "Click to change text into object part." -msgstr "" - -msgid "You can't change a type of the last solid part of the object." -msgstr "" - -msgctxt "EmbossOperation" -msgid "Cut" -msgstr "" - -msgid "Click to change part type into negative volume." -msgstr "" - -msgid "Modifier" -msgstr "" - -msgid "Click to change part type into modifier." -msgstr "" - -msgid "Change Text Type" -msgstr "" - -#, possible-boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "" - -msgid "Name can't be empty." -msgstr "" - -msgid "Name has to be unique." -msgstr "" - -msgid "OK" -msgstr "" - -msgid "Rename style" -msgstr "" - -msgid "Rename current style." -msgstr "" - -msgid "Can't rename temporary style." -msgstr "" - -msgid "First Add style to list." -msgstr "" - -#, possible-boost-format -msgid "Save %1% style" -msgstr "" - -msgid "No changes to save." -msgstr "" - -msgid "New name of style" -msgstr "" - -msgid "Save as new style" -msgstr "" - -msgid "Only valid font can be added to style." -msgstr "" - -msgid "Add style to my list." -msgstr "" - -msgid "Save as new style." -msgstr "" - -msgid "Remove style" -msgstr "" - -msgid "Can't remove the last existing style." -msgstr "" - -#, possible-boost-format -msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "" - -#, possible-boost-format -msgid "Delete \"%1%\" style." -msgstr "" - -#, possible-boost-format -msgid "Can't delete \"%1%\". It is last style." -msgstr "" - -#, possible-boost-format -msgid "Can't delete temporary style \"%1%\"." -msgstr "" - -#, possible-boost-format -msgid "Modified style \"%1%\"" -msgstr "" - -#, possible-boost-format -msgid "Current style is \"%1%\"" -msgstr "" - -#, possible-boost-format -msgid "" -"Changing style to \"%1%\" will discard current style modification.\n" -"\n" -"Would you like to continue anyway?" -msgstr "" - -msgid "Not valid style." -msgstr "" - -#, possible-boost-format -msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "" - -msgid "Unset italic" -msgstr "" - -msgid "Set italic" -msgstr "" - -msgid "Unset bold" -msgstr "" - -msgid "Set bold" -msgstr "" - -msgid "Revert text size." -msgstr "" - -msgid "Revert embossed depth." -msgstr "" - -msgid "" -"Advanced options cannot be changed for the selected font.\n" -"Select another font." -msgstr "" - -msgid "Revert using of model surface." -msgstr "" - -msgid "Revert Transformation per glyph." -msgstr "" - -msgid "Set global orientation for whole text." -msgstr "" - -msgid "Set position and orientation per glyph." -msgstr "" - -msgctxt "Alignment" -msgid "Left" -msgstr "" - -msgctxt "Alignment" -msgid "Center" -msgstr "" - -msgctxt "Alignment" -msgid "Right" -msgstr "" - -msgctxt "Alignment" -msgid "Top" -msgstr "" - -msgctxt "Alignment" -msgid "Middle" -msgstr "" - -msgctxt "Alignment" -msgid "Bottom" -msgstr "" - -msgid "Revert alignment." -msgstr "" - -#. TRN EmbossGizmo: font units -msgid "points" -msgstr "" - -msgid "Revert gap between characters" -msgstr "" - -msgid "Distance between characters" -msgstr "" - -msgid "Revert gap between lines" -msgstr "" - -msgid "Distance between lines" -msgstr "" - -msgid "Undo boldness" -msgstr "" - -msgid "Tiny / Wide glyphs" -msgstr "" - -msgid "Undo letter's skew" -msgstr "" - -msgid "Italic strength ratio" -msgstr "" - -msgid "Undo translation" -msgstr "" - -msgid "Distance of the center of the text to the model surface." -msgstr "" - -msgid "Undo rotation" -msgstr "" - -msgid "Rotate text Clock-wise." -msgstr "" - -msgid "Unlock the text's rotation when moving text along the object's surface." -msgstr "" - -msgid "Lock the text's rotation when moving text along the object's surface." -msgstr "" - -msgid "Select from True Type Collection." -msgstr "" - -msgid "Set text to face camera" -msgstr "" - -msgid "Orient the text towards the camera." -msgstr "" - -#, possible-boost-format -msgid "" -"Can't load exactly same font(\"%1%\"). Aplication selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." -msgstr "" - -msgid "No symbol" -msgstr "" - -msgid "Loading" -msgstr "" - -msgid "In queue" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Height of one text line - Font Ascent -msgid "Height" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Copy surface of model on surface of the embossed text -#. TRN - Input label. Be short as possible -msgid "Use surface" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Option to change projection on curved surface -#. for each character(glyph) in text separately -msgid "Per glyph" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Align Top|Middle|Bottom and Left|Center|Right -msgid "Alignment" -msgstr "" - -#. TRN - Input label. Be short as possible -msgid "Char gap" -msgstr "" - -#. TRN - Input label. Be short as possible -msgid "Line gap" -msgstr "" - -#. TRN - Input label. Be short as possible -msgid "Boldness" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Like Font italic -msgid "Skew ratio" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Distance from model surface to be able -#. move text as part fully into not flat surface -#. move text as modifier fully out of not flat surface -#. TRN - Input label. Be short as possible -msgid "From surface" -msgstr "" - -#. TRN - Input label. Be short as possible -#. Keep vector from bottom to top of text aligned with printer Y axis -msgid "Keep up" -msgstr "" - -#. TRN - Input label. Be short as possible. -#. Some Font file contain multiple fonts inside and -#. this is numerical selector of font inside font collections -msgid "Collection" -msgstr "" - -#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe -msgid "SVG rotate" -msgstr "" - -#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface -msgid "SVG move" -msgstr "" - -msgid "Enter SVG gizmo" -msgstr "" - -msgid "Leave SVG gizmo" -msgstr "" - -msgid "SVG actions" -msgstr "" - -msgid "SVG" -msgstr "" - -#, possible-boost-format -msgid "Opacity (%1%)" -msgstr "" - -#, possible-boost-format -msgid "Color gradient (%1%)" -msgstr "" - -msgid "Undefined fill type" -msgstr "" - -msgid "Linear gradient" -msgstr "" - -msgid "Radial gradient" -msgstr "" - -msgid "Open filled path" -msgstr "" - -msgid "Undefined stroke type" -msgstr "" - -msgid "Path can't be healed from selfintersection and multiple points." -msgstr "" - -msgid "" -"Final shape constains selfintersection or multiple points with same " -"coordinate." -msgstr "" - -#, possible-boost-format -msgid "Shape is marked as invisible (%1%)." -msgstr "" - -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. -#, possible-boost-format -msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "" - -#, possible-boost-format -msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." -msgstr "" - -#, possible-boost-format -msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "" - -msgid "Face the camera" -msgstr "" - -#. TRN - Preview of filename after clear local filepath. -msgid "Unknown filename" -msgstr "" - -#, possible-boost-format -msgid "SVG file path is \"%1%\"" -msgstr "" - -msgid "Reload SVG file from disk." -msgstr "" - -msgid "Change file" -msgstr "" - -msgid "Change to another .svg file" -msgstr "" - -msgid "Forget the file path" -msgstr "" - -msgid "" -"Do NOT save local path to 3MF file.\n" -"Also disables 'reload from disk' option." -msgstr "" - -#. TRN: An menu option to convert the SVG into an unmodifiable model part. -msgid "Bake" -msgstr "" - -#. TRN: Tooltip for the menu item. -msgid "Bake into model as uneditable part" -msgstr "" - -msgid "Save as" -msgstr "" - -msgid "Save SVG file" -msgstr "" - -msgid "Save as '.svg' file" -msgstr "" - -msgid "Size in emboss direction." -msgstr "" - -#. TRN: The placeholder contains a number. -#, possible-boost-format -msgid "Scale also changes amount of curve samples (%1%)" -msgstr "" - -msgid "Width of SVG." -msgstr "" - -msgid "Height of SVG." -msgstr "" - -msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "" - -msgid "Reset scale" -msgstr "" - -msgid "Distance of the center of the SVG to the model surface." -msgstr "" - -msgid "Reset distance" -msgstr "" - -msgid "Reset rotation" -msgstr "" - -msgid "Lock/unlock rotation angle when dragging above the surface." -msgstr "" - -msgid "Mirror vertically" -msgstr "" - -msgid "Mirror horizontally" -msgstr "" - -#. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). -msgid "Change SVG Type" -msgstr "" - -#. TRN - Input label. Be short as possible -msgid "Mirror" -msgstr "" - -msgid "Choose SVG file for emboss:" -msgstr "" - -#, possible-boost-format -msgid "File does NOT exist (%1%)." -msgstr "" - -#, possible-boost-format -msgid "Filename has to end with \".svg\" but you selected %1%" -msgstr "" - -#, possible-boost-format -msgid "Nano SVG parser can't load from file (%1%)." -msgstr "" - -#, possible-boost-format -msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "" - -msgid "Vertex" -msgstr "" - -msgid "Edge" -msgstr "" - -msgid "Plane" -msgstr "" - -msgid "Point on edge" -msgstr "" - -msgid "Point on circle" -msgstr "" - -msgid "Point on plane" -msgstr "" - -msgid "Center of edge" -msgstr "" - -msgid "Center of circle" -msgstr "" - -msgid "ShiftLeft mouse button" -msgstr "" - -msgid "Select feature" -msgstr "" - -msgid "Select point" -msgstr "" - -msgid "Delete" -msgstr "" - -msgid "Restart selection" -msgstr "" - -msgid "Esc" -msgstr "" - -msgid "Unselect" -msgstr "" - -msgid "Measure" -msgstr "" - -msgid "Edit to scale" -msgstr "" - -msgctxt "Verb" -msgid "Scale" -msgstr "" - -msgid "None" -msgstr "" - -msgid "Diameter" -msgstr "" - -msgid "Length" -msgstr "" - -msgid "Selection" -msgstr "" - -msgid "Copy to clipboard" -msgstr "" - -msgid "Perpendicular distance" -msgstr "" - -msgid "Distance" -msgstr "" - -msgid "Direct distance" -msgstr "" - -msgid "Distance XYZ" -msgstr "" - -msgid "Ctrl+" -msgstr "" - -msgid "Notice" -msgstr "" - -msgid "Undefined" -msgstr "" - -#, possible-boost-format -msgid "%1% was replaced with %2%" -msgstr "" - -msgid "The configuration may be generated by a newer version of OrcaSlicer." -msgstr "" - -msgid "Some values have been replaced. Please check them:" -msgstr "" - -msgid "Process" -msgstr "" - -msgid "Filament" -msgstr "" - -msgid "Machine" -msgstr "" - -msgid "Configuration package was loaded, but some values were not recognized." -msgstr "" - -#, possible-boost-format -msgid "" -"Configuration file \"%1%\" was loaded, but some values were not recognized." -msgstr "" - -msgid "V" -msgstr "" - -msgid "" -"OrcaSlicer will terminate because of running out of memory.It may be a bug. " -"It will be appreciated if you report the issue to our team." -msgstr "" - -msgid "Fatal error" -msgstr "" - -msgid "" -"OrcaSlicer will terminate because of a localization error. It will be " -"appreciated if you report the specific scenario this issue happened." -msgstr "" - -msgid "Critical error" -msgstr "" - -#, possible-boost-format -msgid "OrcaSlicer got an unhandled exception: %1%" -msgstr "" - -msgid "Untitled" -msgstr "" - -msgid "Downloading Bambu Network Plug-in" -msgstr "" - -msgid "Login information expired. Please login again." -msgstr "" - -msgid "Incorrect password" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Connect %s failed! [SN:%s, code=%s]" -msgstr "" - -msgid "" -"Orca Slicer requires the Microsoft WebView2 Runtime to operate certain " -"features.\n" -"Click Yes to install it now." -msgstr "" - -msgid "WebView2 Runtime" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"%s\n" -"Do you want to continue?" -msgstr "" - -msgid "Remember my choice" -msgstr "" - -msgid "Loading configuration" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Click to download new version in default browser: %s" -msgstr "" - -msgid "The Orca Slicer needs an upgrade" -msgstr "" - -msgid "This is the newest version." -msgstr "" - -msgid "Info" -msgstr "" - -msgid "" -"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" -"OrcaSlicer has attempted to recreate the configuration file.\n" -"Please note, application settings will be lost, but printer profiles will " -"not be affected." -msgstr "" - -msgid "Rebuild" -msgstr "" - -msgid "Loading current presets" -msgstr "" - -msgid "Loading a mode view" -msgstr "" - -msgid "Choose one file (3mf):" -msgstr "" - -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "" - -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "" - -msgid "Choose ZIP file" -msgstr "" - -msgid "Choose one file (gcode/3mf):" -msgstr "" - -msgid "Some presets are modified." -msgstr "" - -msgid "" -"You can keep the modifield presets to the new project, discard or save " -"changes as new presets." -msgstr "" - -msgid "User logged out" -msgstr "" - -msgid "new or open project file is not allowed during the slicing process!" -msgstr "" - -msgid "Open Project" -msgstr "" - -msgid "" -"The version of Orca Slicer is too low and needs to be updated to the latest " -"version before it can be used normally" -msgstr "" - -msgid "Privacy Policy Update" -msgstr "" - -msgid "" -"The number of user presets cached in the cloud has exceeded the upper limit, " -"newly created user presets can only be used locally." -msgstr "" - -msgid "Sync user presets" -msgstr "" - -msgid "Loading user preset" -msgstr "" - -msgid "Switching application language" -msgstr "" - -msgid "Select the language" -msgstr "" - -msgid "Language" -msgstr "" - -msgid "*" -msgstr "" - -msgid "The uploads are still ongoing" -msgstr "" - -msgid "Stop them and continue anyway?" -msgstr "" - -msgid "Ongoing uploads" -msgstr "" - -msgid "Select a G-code file:" -msgstr "" - -msgid "" -"Could not start URL download. Destination folder is not set. Please choose " -"destination folder in Configuration Wizard." -msgstr "" - -msgid "Import File" -msgstr "" - -msgid "Choose files" -msgstr "" - -msgid "New Folder" -msgstr "" - -msgid "Open" -msgstr "" - -msgid "Rename" -msgstr "" - -msgid "Orca Slicer GUI initialization failed" -msgstr "" - -#, possible-boost-format -msgid "Fatal error, exception catched: %1%" -msgstr "" - -msgid "Quality" -msgstr "" - -msgid "Shell" -msgstr "" - -msgid "Infill" -msgstr "" - -msgid "Support" -msgstr "" - -msgid "Flush options" -msgstr "" - -msgid "Speed" -msgstr "" - -msgid "Strength" -msgstr "" - -msgid "Top Solid Layers" -msgstr "" - -msgid "Top Minimum Shell Thickness" -msgstr "" - -msgid "Bottom Solid Layers" -msgstr "" - -msgid "Bottom Minimum Shell Thickness" -msgstr "" - -msgid "Ironing" -msgstr "" - -msgid "Fuzzy Skin" -msgstr "" - -msgid "Extruders" -msgstr "" - -msgid "Extrusion Width" -msgstr "" - -msgid "Wipe options" -msgstr "" - -msgid "Bed adhension" -msgstr "" - -msgid "Add part" -msgstr "" - -msgid "Add negative part" -msgstr "" - -msgid "Add modifier" -msgstr "" - -msgid "Add support blocker" -msgstr "" - -msgid "Add support enforcer" -msgstr "" - -msgid "Add text" -msgstr "" - -msgid "Add negative text" -msgstr "" - -msgid "Add text modifier" -msgstr "" - -msgid "Add SVG part" -msgstr "" - -msgid "Add negative SVG" -msgstr "" - -msgid "Add SVG modifier" -msgstr "" - -msgid "Select settings" -msgstr "" - -msgid "Hide" -msgstr "" - -msgid "Show" -msgstr "" - -msgid "Del" -msgstr "" - -msgid "Delete the selected object" -msgstr "" - -msgid "Load..." -msgstr "" - -msgid "Cube" -msgstr "" - -msgid "Cylinder" -msgstr "" - -msgid "Cone" -msgstr "" - -msgid "Disc" -msgstr "" - -msgid "Torus" -msgstr "" - -msgid "Orca Cube" -msgstr "" - -msgid "3DBenchy" -msgstr "" - -msgid "Autodesk FDM Test" -msgstr "" - -msgid "Voron Cube" -msgstr "" - -msgid "Stanford Bunny" -msgstr "" - -msgid "Orca String Hell" -msgstr "" - -msgid "" -"This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " -"for the 'Only One Wall on Top Surfaces' to work best.\n" -"Yes - Change these settings automatically\n" -"No - Do not change these settings for me" -msgstr "" - -msgid "Text" -msgstr "" - -msgid "Height range Modifier" -msgstr "" - -msgid "Add settings" -msgstr "" - -msgid "Change type" -msgstr "" - -msgid "Set as an individual object" -msgstr "" - -msgid "Set as individual objects" -msgstr "" - -msgid "Fill bed with copies" -msgstr "" - -msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "" - -msgid "Printable" -msgstr "" - -msgid "Fix model" -msgstr "" - -msgid "Export as one STL" -msgstr "" - -msgid "Export as STLs" -msgstr "" - -msgid "Reload from disk" -msgstr "" - -msgid "Reload the selected parts from disk" -msgstr "" - -msgid "Replace with STL" -msgstr "" - -msgid "Replace the selected part with new STL" -msgstr "" - -msgid "Change filament" -msgstr "" - -msgid "Set filament for selected items" -msgstr "" - -msgid "Default" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Filament %d" -msgstr "" - -msgid "active" -msgstr "" - -msgid "Scale to build volume" -msgstr "" - -msgid "Scale an object to fit the build volume" -msgstr "" - -msgid "Flush Options" -msgstr "" - -msgid "Flush into objects' infill" -msgstr "" - -msgid "Flush into this object" -msgstr "" - -msgid "Flush into objects' support" -msgstr "" - -msgid "Edit in Parameter Table" -msgstr "" - -msgid "Convert from inch" -msgstr "" - -msgid "Restore to inch" -msgstr "" - -msgid "Convert from meter" -msgstr "" - -msgid "Restore to meter" -msgstr "" - -msgid "Assemble" -msgstr "" - -msgid "Assemble the selected objects to an object with multiple parts" -msgstr "" - -msgid "Assemble the selected objects to an object with single part" -msgstr "" - -msgid "Mesh boolean" -msgstr "" - -msgid "Mesh boolean operations including union and subtraction" -msgstr "" - -msgid "Along X axis" -msgstr "" - -msgid "Mirror along the X axis" -msgstr "" - -msgid "Along Y axis" -msgstr "" - -msgid "Mirror along the Y axis" -msgstr "" - -msgid "Along Z axis" -msgstr "" - -msgid "Mirror along the Z axis" -msgstr "" - -msgid "Mirror object" -msgstr "" - -msgid "Edit text" -msgstr "" - -msgid "Ability to change text, font, size, ..." -msgstr "" - -msgid "Edit SVG" -msgstr "" - -msgid "Change SVG source file, projection, size, ..." -msgstr "" - -msgid "Invalidate cut info" -msgstr "" - -msgid "Add Primitive" -msgstr "" - -msgid "Add Handy models" -msgstr "" - -msgid "Show Labels" -msgstr "" - -msgid "To objects" -msgstr "" - -msgid "Split the selected object into multiple objects" -msgstr "" - -msgid "To parts" -msgstr "" - -msgid "Split the selected object into multiple parts" -msgstr "" - -msgid "Split" -msgstr "" - -msgid "Split the selected object" -msgstr "" - -msgid "Auto orientation" -msgstr "" - -msgid "Auto orient the object to improve print quality." -msgstr "" - -msgid "Split the selected object into mutiple objects" -msgstr "" - -msgid "Split the selected object into mutiple parts" -msgstr "" - -msgid "Select All" -msgstr "" - -msgid "select all objects on current plate" -msgstr "" - -msgid "Delete All" -msgstr "" - -msgid "delete all objects on current plate" -msgstr "" - -msgid "Arrange" -msgstr "" - -msgid "arrange current plate" -msgstr "" - -msgid "Auto Rotate" -msgstr "" - -msgid "auto rotate current plate" -msgstr "" - -msgid "Delete Plate" -msgstr "" - -msgid "Remove the selected plate" -msgstr "" - -msgid "Clone" -msgstr "" - -msgid "Simplify Model" -msgstr "" - -msgid "Center" -msgstr "" - -msgid "Edit Process Settings" -msgstr "" - -msgid "Edit print parameters for a single object" -msgstr "" - -msgid "Change Filament" -msgstr "" - -msgid "Set Filament for selected items" -msgstr "" - -msgid "current" -msgstr "" - -msgid "Unlock" -msgstr "" - -msgid "Lock" -msgstr "" - -msgid "Edit Plate Name" -msgstr "" - -msgid "Name" -msgstr "" - -msgid "Fila." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%1$d error repaired" -msgid_plural "%1$d errors repaired" -msgstr[0] "" -msgstr[1] "" - -#, possible-c-format, possible-boost-format -msgid "Error: %1$d non-manifold edge." -msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "" -msgstr[1] "" - -msgid "Remaining errors" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%1$d non-manifold edge" -msgid_plural "%1$d non-manifold edges" -msgstr[0] "" -msgstr[1] "" - -msgid "Right click the icon to fix model object" -msgstr "" - -msgid "Right button click the icon to drop the object settings" -msgstr "" - -msgid "Click the icon to reset all settings of the object" -msgstr "" - -msgid "Right button click the icon to drop the object printable property" -msgstr "" - -msgid "Click the icon to toggle printable property of the object" -msgstr "" - -msgid "Click the icon to edit support painting of the object" -msgstr "" - -msgid "Click the icon to edit color painting of the object" -msgstr "" - -msgid "Click the icon to shift this object to the bed" -msgstr "" - -msgid "Loading file" -msgstr "" - -msgid "Error!" -msgstr "" - -msgid "Failed to get the model data in the current file." -msgstr "" - -msgid "Generic" -msgstr "" - -msgid "Add Modifier" -msgstr "" - -msgid "Switch to per-object setting mode to edit modifier settings." -msgstr "" - -msgid "" -"Switch to per-object setting mode to edit process settings of selected " -"objects." -msgstr "" - -msgid "Delete connector from object which is a part of cut" -msgstr "" - -msgid "Delete solid part from object which is a part of cut" -msgstr "" - -msgid "Delete negative volume from object which is a part of cut" -msgstr "" - -msgid "" -"To save cut correspondence you can delete all connectors from all related " -"objects." -msgstr "" - -msgid "" -"This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." -msgstr "" - -msgid "Delete all connectors" -msgstr "" - -msgid "Deleting the last solid part is not allowed." -msgstr "" - -msgid "The target object contains only one part and can not be splited." -msgstr "" - -msgid "Assembly" -msgstr "" - -msgid "Cut Connectors information" -msgstr "" - -msgid "Object manipulation" -msgstr "" - -msgid "Group manipulation" -msgstr "" - -msgid "Object Settings to modify" -msgstr "" - -msgid "Part Settings to modify" -msgstr "" - -msgid "Layer range Settings to modify" -msgstr "" - -msgid "Part manipulation" -msgstr "" - -msgid "Instance manipulation" -msgstr "" - -msgid "Height ranges" -msgstr "" - -msgid "Settings for height range" -msgstr "" - -msgid "Layer" -msgstr "" - -msgid "Selection conflicts" -msgstr "" - -msgid "" -"If first selected item is an object, the second one should also be object." -msgstr "" - -msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." -msgstr "" - -msgid "The type of the last solid object part is not to be changed." -msgstr "" - -msgid "Negative Part" -msgstr "" - -msgid "Support Blocker" -msgstr "" - -msgid "Support Enforcer" -msgstr "" - -msgid "Type:" -msgstr "" - -msgid "Choose part type" -msgstr "" - -msgid "Enter new name" -msgstr "" - -msgid "Renaming" -msgstr "" - -msgid "Following model object has been repaired" -msgid_plural "Following model objects have been repaired" -msgstr[0] "" -msgstr[1] "" - -msgid "Failed to repair folowing model object" -msgid_plural "Failed to repair folowing model objects" -msgstr[0] "" -msgstr[1] "" - -msgid "Repairing was canceled" -msgstr "" - -msgid "Additional process preset" -msgstr "" - -msgid "Remove parameter" -msgstr "" - -msgid "to" -msgstr "" - -msgid "Remove height range" -msgstr "" - -msgid "Add height range" -msgstr "" - -msgid "Invalid numeric." -msgstr "" - -msgid "one cell can only be copied to one or multiple cells in the same column" -msgstr "" - -msgid "multiple cells copy is not supported" -msgstr "" - -msgid "Outside" -msgstr "" - -msgid "Layer height" -msgstr "" - -msgid "Wall loops" -msgstr "" - -msgid "Infill density(%)" -msgstr "" - -msgid "Auto Brim" -msgstr "" - -msgid "Mouse ear" -msgstr "" - -msgid "Outer brim only" -msgstr "" - -msgid "Inner brim only" -msgstr "" - -msgid "Outer and inner brim" -msgstr "" - -msgid "No-brim" -msgstr "" - -msgid "Outer wall speed" -msgstr "" - -msgid "Plate" -msgstr "" - -msgid "Brim" -msgstr "" - -msgid "Object/Part Setting" -msgstr "" - -msgid "Reset parameter" -msgstr "" - -msgid "Multicolor Print" -msgstr "" - -msgid "Line Type" -msgstr "" - -msgid "More" -msgstr "" - -msgid "Open Preferences." -msgstr "" - -msgid "Open next tip." -msgstr "" - -msgid "Open Documentation in web browser." -msgstr "" - -msgid "Color" -msgstr "" - -msgid "Pause" -msgstr "" - -msgid "Template" -msgstr "" - -msgid "Custom" -msgstr "" - -msgid "Pause:" -msgstr "" - -msgid "Custom Template:" -msgstr "" - -msgid "Custom G-code:" -msgstr "" - -msgid "Custom G-code" -msgstr "" - -msgid "Enter Custom G-code used on current layer:" -msgstr "" - -msgid "Jump to Layer" -msgstr "" - -msgid "Jump to layer" -msgstr "" - -msgid "Please enter the layer number" -msgstr "" - -msgid "Add Pause" -msgstr "" - -msgid "Insert a pause command at the beginning of this layer." -msgstr "" - -msgid "Add Custom G-code" -msgstr "" - -msgid "Insert custom G-code at the beginning of this layer." -msgstr "" - -msgid "Add Custom Template" -msgstr "" - -msgid "Insert template custom G-code at the beginning of this layer." -msgstr "" - -msgid "Filament " -msgstr "" - -msgid "Change filament at the beginning of this layer." -msgstr "" - -msgid "Delete Pause" -msgstr "" - -msgid "Delete Custom Template" -msgstr "" - -msgid "Edit Custom G-code" -msgstr "" - -msgid "Delete Custom G-code" -msgstr "" - -msgid "Delete Filament Change" -msgstr "" - -msgid "No printer" -msgstr "" - -msgid "..." -msgstr "" - -msgid "Failed to connect to the server" -msgstr "" - -msgid "Check the status of current system services" -msgstr "" - -msgid "code" -msgstr "" - -msgid "Failed to connect to cloud service" -msgstr "" - -msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "" - -msgid "Failed to connect to the printer" -msgstr "" - -msgid "Connection to printer failed" -msgstr "" - -msgid "Please check the network connection of the printer and Studio." -msgstr "" - -msgid "Connecting..." -msgstr "" - -msgid "?" -msgstr "" - -msgid "/" -msgstr "" - -msgid "Empty" -msgstr "" - -msgid "AMS" -msgstr "" - -msgid "Auto Refill" -msgstr "" - -msgid "AMS not connected" -msgstr "" - -msgid "Load Filament" -msgstr "" - -msgid "Unload Filament" -msgstr "" - -msgid "Ext Spool" -msgstr "" - -msgid "Tips" -msgstr "" - -msgid "Guide" -msgstr "" - -msgid "Retry" -msgstr "" - -msgid "Calibrating AMS..." -msgstr "" - -msgid "A problem occured during calibration. Click to view the solution." -msgstr "" - -msgid "Calibrate again" -msgstr "" - -msgid "Cancel calibration" -msgstr "" - -msgid "Idling..." -msgstr "" - -msgid "Heat the nozzle" -msgstr "" - -msgid "Cut filament" -msgstr "" - -msgid "Pull back current filament" -msgstr "" - -msgid "Push new filament into extruder" -msgstr "" - -msgid "Purge old filament" -msgstr "" - -msgid "Feed Filament" -msgstr "" - -msgid "Confirm extruded" -msgstr "" - -msgid "Check filament location" -msgstr "" - -msgid "Grab new filament" -msgstr "" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filiament." -msgstr "" - -msgid "Edit" -msgstr "" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." -msgstr "" - -msgid "No arrangable objects are selected." -msgstr "" - -msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." -msgstr "" - -msgid "Arranging..." -msgstr "" - -msgid "Arranging" -msgstr "" - -msgid "Arranging canceled." -msgstr "" - -msgid "" -"Arranging is done but there are unpacked items. Reduce spacing and try again." -msgstr "" - -msgid "Arranging done." -msgstr "" - -msgid "" -"Arrange failed. Found some exceptions when processing object geometries." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Arrangement ignored the following objects which can't fit into a single " -"bed:\n" -"%s" -msgstr "" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." -msgstr "" - -msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." -msgstr "" - -msgid "Orienting..." -msgstr "" - -msgid "Orienting" -msgstr "" - -msgid "Orienting canceled." -msgstr "" - -msgid "Filling" -msgstr "" - -msgid "Bed filling canceled." -msgstr "" - -msgid "Bed filling done." -msgstr "" - -msgid "Searching for optimal orientation" -msgstr "" - -msgid "Orientation search canceled." -msgstr "" - -msgid "Orientation found." -msgstr "" - -msgid "Logging in" -msgstr "" - -msgid "Login failed" -msgstr "" - -msgid "Please check the printer network connection." -msgstr "" - -msgid "Abnormal print file data. Please slice again." -msgstr "" - -msgid "Task canceled." -msgstr "" - -msgid "Upload task timed out. Please check the network status and try again." -msgstr "" - -msgid "Cloud service connection failed. Please try again." -msgstr "" - -msgid "Print file not found. please slice again." -msgstr "" - -msgid "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." -msgstr "" - -msgid "Failed to send the print job. Please try again." -msgstr "" - -msgid "Failed to upload file to ftp. Please try again." -msgstr "" - -msgid "" -"Check the current status of the bambu server by clicking on the link above." -msgstr "" - -msgid "" -"The size of the print file is too large. Please adjust the file size and try " -"again." -msgstr "" - -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "" - -msgid "" -"Failed to upload print file to FTP. Please check the network status and try " -"again." -msgstr "" - -msgid "Sending print job over LAN" -msgstr "" - -msgid "Sending print job through cloud service" -msgstr "" - -msgid "Print task sending times out." -msgstr "" - -msgid "Service Unavailable" -msgstr "" - -msgid "Unkown Error." -msgstr "" - -msgid "Sending print configuration" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Successfully sent. Will automatically jump to the device page in %ss" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Successfully sent. Will automatically jump to the next page in %ss" -msgstr "" - -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "" - -msgid "Sending gcode file over LAN" -msgstr "" - -msgid "Sending gcode file to sdcard" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Successfully sent. Close current page in %s s" -msgstr "" - -msgid "An SD card needs to be inserted before sending to printer." -msgstr "" - -msgid "Importing SLA archive" -msgstr "" - -msgid "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer preset first before importing that SLA archive." -msgstr "" - -msgid "Importing canceled." -msgstr "" - -msgid "Importing done." -msgstr "" - -msgid "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." -msgstr "" - -msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "" - -msgid "Please check your object list before preset changing." -msgstr "" - -msgid "Attention!" -msgstr "" - -msgid "Downloading" -msgstr "" - -msgid "Download failed" -msgstr "" - -msgid "Cancelled" -msgstr "" - -msgid "Install successfully." -msgstr "" - -msgid "Installing" -msgstr "" - -msgid "Install failed" -msgstr "" - -msgid "Portions copyright" -msgstr "" - -msgid "Copyright" -msgstr "" - -msgid "License" -msgstr "" - -msgid "Orca Slicer is licensed under " -msgstr "" - -msgid "GNU Affero General Public License, version 3" -msgstr "" - -msgid "" -"Orca Slicer is based on BambuStudio by Bambulab, which is from PrusaSlicer " -"by Prusa Research. PrusaSlicer is from Slic3r by Alessandro Ranellucci and " -"the RepRap community" -msgstr "" - -msgid "Libraries" -msgstr "" - -msgid "" -"This software uses open source components whose copyright and other " -"proprietary rights belong to their respective owners" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "About %s" -msgstr "" - -msgid "Orca Slicer " -msgstr "" - -msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "" - -msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "" - -msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." -msgstr "" - -msgid "" -"Slic3r was created by Alessandro Ranellucci with the help of many other " -"contributors." -msgstr "" - -msgid "Version" -msgstr "" - -msgid "AMS Materials Setting" -msgstr "" - -msgid "Confirm" -msgstr "" - -msgid "Close" -msgstr "" - -msgid "Colour" -msgstr "" - -msgid "" -"Nozzle\n" -"Temperature" -msgstr "" - -msgid "max" -msgstr "" - -msgid "min" -msgstr "" - -#, possible-boost-format -msgid "The input value should be greater than %1% and less than %2%" -msgstr "" - -msgid "SN" -msgstr "" - -msgid "Setting AMS slot information while printing is not supported" -msgstr "" - -msgid "Factors of Flow Dynamics Calibration" -msgstr "" - -msgid "PA Profile" -msgstr "" - -msgid "Factor K" -msgstr "" - -msgid "Factor N" -msgstr "" - -msgid "Setting Virtual slot information while printing is not supported" -msgstr "" - -msgid "Are you sure you want to clear the filament information?" -msgstr "" - -msgid "You need to select the material type and color first." -msgstr "" - -msgid "Please input a valid value (K in 0~0.3)" -msgstr "" - -msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -msgstr "" - -msgid "Other Color" -msgstr "" - -msgid "Custom Color" -msgstr "" - -msgid "Dynamic flow calibration" -msgstr "" - -msgid "" -"The nozzle temp and max volumetric speed will affect the calibration " -"results. Please fill in the same values as the actual printing. They can be " -"auto-filled by selecting a filament preset." -msgstr "" - -msgid "Nozzle Diameter" -msgstr "" - -msgid "Bed Type" -msgstr "" - -msgid "Nozzle temperature" -msgstr "" - -msgid "Bed Temperature" -msgstr "" - -msgid "Max volumetric speed" -msgstr "" - -msgid "℃" -msgstr "" - -msgid "Bed temperature" -msgstr "" - -msgid "mm³" -msgstr "" - -msgid "Start calibration" -msgstr "" - -msgid "Next" -msgstr "" - -msgid "" -"Calibration completed. Please find the most uniform extrusion line on your " -"hot bed like the picture below, and fill the value on its left side into the " -"factor K input box." -msgstr "" - -msgid "Save" -msgstr "" - -msgid "Last Step" -msgstr "" - -msgid "Example" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Calibrating... %d%%" -msgstr "" - -msgid "Calibration completed" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s does not support %s" -msgstr "" - -msgid "Dynamic flow Calibration" -msgstr "" - -msgid "Step" -msgstr "" - -msgid "AMS Slots" -msgstr "" - -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "" - -msgid "Enable AMS" -msgstr "" - -msgid "Print with filaments in the AMS" -msgstr "" - -msgid "Disable AMS" -msgstr "" - -msgid "Print with the filament mounted on the back of chassis" -msgstr "" - -msgid "Cabin humidity" -msgstr "" - -msgid "" -"Green means that AMS humidity is normal, orange represent humidity is high, " -"red represent humidity is too high.(Hygrometer: lower the better.)" -msgstr "" - -msgid "Desiccant status" -msgstr "" - -msgid "" -"A desiccant status lower than two bars indicates that desiccant may be " -"inactive. Please change the desiccant.(The bars: higher the better.)" -msgstr "" - -msgid "" -"Note: When the lid is open or the desiccant pack is changed, it can take " -"hours or a night to absorb the moisture. Low temperatures also slow down the " -"process. During this time, the indicator may not represent the chamber " -"accurately." -msgstr "" - -msgid "" -"Config which AMS slot should be used for a filament used in the print job" -msgstr "" - -msgid "Filament used in this print job" -msgstr "" - -msgid "AMS slot used for this filament" -msgstr "" - -msgid "Click to select AMS slot manually" -msgstr "" - -msgid "Do not Enable AMS" -msgstr "" - -msgid "Print using materials mounted on the back of the case" -msgstr "" - -msgid "Print with filaments in ams" -msgstr "" - -msgid "Print with filaments mounted on the back of the chassis" -msgstr "" - -msgid "" -"When the current material run out, the printer will continue to print in the " -"following order." -msgstr "" - -msgid "Group" -msgstr "" - -msgid "The printer does not currently support auto refill." -msgstr "" - -msgid "" -"AMS filament backup is not enabled, please enable it in the AMS settings." -msgstr "" - -msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" -msgstr "" - -msgid "AMS Settings" -msgstr "" - -msgid "Insertion update" -msgstr "" - -msgid "" -"The AMS will automatically read the filament information when inserting a " -"new Bambu Lab filament. This takes about 20 seconds." -msgstr "" - -msgid "" -"Note: if new filament is inserted during printing, the AMS will not " -"automatically read any information until printing is completed." -msgstr "" - -msgid "" -"When inserting a new filament, the AMS will not automatically read its " -"information, leaving it blank for you to enter manually." -msgstr "" - -msgid "Power on update" -msgstr "" - -msgid "" -"The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." -msgstr "" - -msgid "" -"The AMS will not automatically read information from inserted filament " -"during startup and will continue to use the information recorded before the " -"last shutdown." -msgstr "" - -msgid "Update remaining capacity" -msgstr "" - -msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." -msgstr "" - -msgid "AMS filament backup" -msgstr "" - -msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" -msgstr "" - -msgid "File" -msgstr "" - -msgid "Calibration" -msgstr "" - -msgid "" -"Failed to download the plug-in. Please check your firewall settings and vpn " -"software, check and retry." -msgstr "" - -msgid "" -"Failed to install the plug-in. Please check whether it is blocked or deleted " -"by anti-virus software." -msgstr "" - -msgid "click here to see more info" -msgstr "" - -msgid "Please home all axes (click " -msgstr "" - -msgid "" -") to locate the toolhead's position. This prevents device moving beyond the " -"printable boundary and causing equipment wear." -msgstr "" - -msgid "Go Home" -msgstr "" - -msgid "" -"A error occurred. Maybe memory of system is not enough or it's a bug of the " -"program" -msgstr "" - -msgid "Please save project and restart the program. " -msgstr "" - -msgid "Processing G-Code from Previous file..." -msgstr "" - -msgid "Slicing complete" -msgstr "" - -msgid "Access violation" -msgstr "" - -msgid "Illegal instruction" -msgstr "" - -msgid "Divide by zero" -msgstr "" - -msgid "Overflow" -msgstr "" - -msgid "Underflow" -msgstr "" - -msgid "Floating reserved operand" -msgstr "" - -msgid "Stack overflow" -msgstr "" - -msgid "Unknown error when export G-code." -msgstr "" - -#, possible-boost-format -msgid "" -"Failed to save gcode file.\n" -"Error message: %1%.\n" -"Source file %2%." -msgstr "" - -#, possible-boost-format -msgid "Succeed to export G-code to %1%" -msgstr "" - -msgid "Running post-processing scripts" -msgstr "" - -msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "" - -#, possible-boost-format -msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "" - -msgid "Origin" -msgstr "" - -msgid "Size in X and Y of the rectangular plate." -msgstr "" - -msgid "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." -msgstr "" - -msgid "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." -msgstr "" - -msgid "Rectangular" -msgstr "" - -msgid "Circular" -msgstr "" - -msgid "Load shape from STL..." -msgstr "" - -msgid "Settings" -msgstr "" - -msgid "Texture" -msgstr "" - -msgid "Remove" -msgstr "" - -msgid "Not found:" -msgstr "" - -msgid "Model" -msgstr "" - -msgid "Choose an STL file to import bed shape from:" -msgstr "" - -msgid "Invalid file format." -msgstr "" - -msgid "Error! Invalid model" -msgstr "" - -msgid "The selected file contains no geometry." -msgstr "" - -msgid "" -"The selected file contains several disjoint areas. This is not supported." -msgstr "" - -msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "" - -msgid "Choose an STL file to import bed model from:" -msgstr "" - -msgid "Bed Shape" -msgstr "" - -msgid "" -"Nozzle may be blocked when the temperature is out of recommended range.\n" -"Please make sure whether to use the temperature to print.\n" -"\n" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" -msgstr "" - -msgid "" -"Too small max volumetric speed.\n" -"Reset to 0.5" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" -msgstr "" - -msgid "" -"Too small layer height.\n" -"Reset to 0.2" -msgstr "" - -msgid "" -"Too small ironing spacing.\n" -"Reset to 0.1" -msgstr "" - -msgid "" -"Zero initial layer height is invalid.\n" -"\n" -"The first layer height will be reset to 0.2." -msgstr "" - -msgid "" -"This setting is only used for model size tunning with small value in some " -"cases.\n" -"For example, when model size has small error and hard to be assembled.\n" -"For large size tuning, please use model scale function.\n" -"\n" -"The value will be reset to 0." -msgstr "" - -msgid "" -"Too large elefant foot compensation is unreasonable.\n" -"If really have serious elephant foot effect, please check other settings.\n" -"For example, whether bed temperature is too high.\n" -"\n" -"The value will be reset to 0." -msgstr "" - -msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." -msgstr "" - -msgid " But machines with I3 structure will not generate timelapse videos." -msgstr "" - -msgid "" -"Change these settings automatically? \n" -"Yes - Change these settings and enable spiral mode automatically\n" -"No - Give up using spiral mode this time" -msgstr "" - -msgid "" -"Alternate extra wall only works with ensure vertical shell thickness " -"disabled. " -msgstr "" - -msgid "" -"Change these settings automatically? \n" -"Yes - Disable ensure vertical shell thickness and enable alternate extra " -"wall\n" -"No - Dont use alternate extra wall" -msgstr "" - -msgid "" -"Prime tower does not work when Adaptive Layer Height or Independent Support " -"Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height and Independent Support Layer Height" -msgstr "" - -msgid "" -"Prime tower does not work when Adaptive Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height" -msgstr "" - -msgid "" -"Prime tower does not work when Independent Support Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Independent Support Layer Height" -msgstr "" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" - -msgid "Auto bed leveling" -msgstr "" - -msgid "Heatbed preheating" -msgstr "" - -msgid "Sweeping XY mech mode" -msgstr "" - -msgid "Changing filament" -msgstr "" - -msgid "M400 pause" -msgstr "" - -msgid "Paused due to filament runout" -msgstr "" - -msgid "Heating hotend" -msgstr "" - -msgid "Calibrating extrusion" -msgstr "" - -msgid "Scanning bed surface" -msgstr "" - -msgid "Inspecting first layer" -msgstr "" - -msgid "Identifying build plate type" -msgstr "" - -msgid "Calibrating Micro Lidar" -msgstr "" - -msgid "Homing toolhead" -msgstr "" - -msgid "Cleaning nozzle tip" -msgstr "" - -msgid "Checking extruder temperature" -msgstr "" - -msgid "Printing was paused by the user" -msgstr "" - -msgid "Pause of front cover falling" -msgstr "" - -msgid "Calibrating the micro lida" -msgstr "" - -msgid "Calibrating extrusion flow" -msgstr "" - -msgid "Paused due to nozzle temperature malfunction" -msgstr "" - -msgid "Paused due to heat bed temperature malfunction" -msgstr "" - -msgid "Filament unloading" -msgstr "" - -msgid "Skip step pause" -msgstr "" - -msgid "Filament loading" -msgstr "" - -msgid "Motor noise calibration" -msgstr "" - -msgid "Paused due to AMS lost" -msgstr "" - -msgid "Paused due to low speed of the heat break fan" -msgstr "" - -msgid "Paused due to chamber temperature control error" -msgstr "" - -msgid "Cooling chamber" -msgstr "" - -msgid "Paused by the Gcode inserted by user" -msgstr "" - -msgid "Motor noise showoff" -msgstr "" - -msgid "Nozzle filament covered detected pause" -msgstr "" - -msgid "Cutter error pause" -msgstr "" - -msgid "First layer error pause" -msgstr "" - -msgid "Nozzle clog pause" -msgstr "" - -msgid "MC" -msgstr "" - -msgid "MainBoard" -msgstr "" - -msgid "TH" -msgstr "" - -msgid "XCam" -msgstr "" - -msgid "Unknown" -msgstr "" - -msgid "Fatal" -msgstr "" - -msgid "Serious" -msgstr "" - -msgid "Common" -msgstr "" - -msgid "Update successful." -msgstr "" - -msgid "Downloading failed." -msgstr "" - -msgid "Verification failed." -msgstr "" - -msgid "Update failed." -msgstr "" - -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." -msgstr "" - -msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." -msgstr "" - -msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." -msgstr "" - -msgid "Failed to start printing job" -msgstr "" - -msgid "" -"This calibration does not support the currently selected nozzle diameter" -msgstr "" - -msgid "Current flowrate cali param is invalid" -msgstr "" - -msgid "Selected diameter and machine diameter do not match" -msgstr "" - -msgid "Failed to generate cali gcode" -msgstr "" - -msgid "Calibration error" -msgstr "" - -msgid "TPU is not supported by AMS." -msgstr "" - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "" - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "" - -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "" - -msgid "default" -msgstr "" - -#, possible-boost-format -msgid "Edit Custom G-code (%1%)" -msgstr "" - -msgid "Built-in placeholders (Double click item to add to G-code)" -msgstr "" - -msgid "Search gcode placeholders" -msgstr "" - -msgid "Add selected placeholder to G-code" -msgstr "" - -msgid "Select placeholder" -msgstr "" - -msgid "[Global] Slicing State" -msgstr "" - -msgid "Read Only" -msgstr "" - -msgid "Read Write" -msgstr "" - -msgid "Slicing State" -msgstr "" - -msgid "Print Statistics" -msgstr "" - -msgid "Objects Info" -msgstr "" - -msgid "Dimensions" -msgstr "" - -msgid "Temperatures" -msgstr "" - -msgid "Timestamps" -msgstr "" - -#, possible-boost-format -msgid "Specific for %1%" -msgstr "" - -msgid "Presets" -msgstr "" - -msgid "Print settings" -msgstr "" - -msgid "Filament settings" -msgstr "" - -msgid "SLA Materials settings" -msgstr "" - -msgid "Printer settings" -msgstr "" - -msgid "parameter name" -msgstr "" - -msgid "N/A" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s can't be percentage" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Value %s is out of range, continue?" -msgstr "" - -msgid "Parameter validation" -msgstr "" - -msgid "Value is out of range." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Is it %s%% or %s %s?\n" -"YES for %s%%, \n" -"NO for %s %s." -msgstr "" - -#, possible-boost-format -msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "" - -msgid "Layer Height" -msgstr "" - -msgid "Line Width" -msgstr "" - -msgid "Fan Speed" -msgstr "" - -msgid "Temperature" -msgstr "" - -msgid "Flow" -msgstr "" - -msgid "Tool" -msgstr "" - -msgid "Layer Time" -msgstr "" - -msgid "Layer Time (log)" -msgstr "" - -msgid "Height: " -msgstr "" - -msgid "Width: " -msgstr "" - -msgid "Speed: " -msgstr "" - -msgid "Flow: " -msgstr "" - -msgid "Layer Time: " -msgstr "" - -msgid "Fan: " -msgstr "" - -msgid "Temperature: " -msgstr "" - -msgid "Loading G-codes" -msgstr "" - -msgid "Generating geometry vertex data" -msgstr "" - -msgid "Generating geometry index data" -msgstr "" - -msgid "Statistics of All Plates" -msgstr "" - -msgid "Display" -msgstr "" - -msgid "Flushed" -msgstr "" - -msgid "Total" -msgstr "" - -msgid "Tower" -msgstr "" - -msgid "Total Estimation" -msgstr "" - -msgid "Total time" -msgstr "" - -msgid "Total cost" -msgstr "" - -msgid "up to" -msgstr "" - -msgid "above" -msgstr "" - -msgid "from" -msgstr "" - -msgid "Color Scheme" -msgstr "" - -msgid "Time" -msgstr "" - -msgid "Percent" -msgstr "" - -msgid "Used filament" -msgstr "" - -msgid "Layer Height (mm)" -msgstr "" - -msgid "Line Width (mm)" -msgstr "" - -msgid "Speed (mm/s)" -msgstr "" - -msgid "Fan Speed (%)" -msgstr "" - -msgid "Temperature (°C)" -msgstr "" - -msgid "Volumetric flow rate (mm³/s)" -msgstr "" - -msgid "Travel" -msgstr "" - -msgid "Seams" -msgstr "" - -msgid "Retract" -msgstr "" - -msgid "Unretract" -msgstr "" - -msgid "Filament Changes" -msgstr "" - -msgid "Wipe" -msgstr "" - -msgid "Options" -msgstr "" - -msgid "travel" -msgstr "" - -msgid "Extruder" -msgstr "" - -msgid "Filament change times" -msgstr "" - -msgid "Cost" -msgstr "" - -msgid "Color change" -msgstr "" - -msgid "Print" -msgstr "" - -msgid "Printer" -msgstr "" - -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" -msgstr "" - -msgid "Time Estimation" -msgstr "" - -msgid "Normal mode" -msgstr "" - -msgid "Prepare time" -msgstr "" - -msgid "Model printing time" -msgstr "" - -msgid "Switch to silent mode" -msgstr "" - -msgid "Switch to normal mode" -msgstr "" - -msgid "Variable layer height" -msgstr "" - -msgid "Adaptive" -msgstr "" - -msgid "Quality / Speed" -msgstr "" - -msgid "Smooth" -msgstr "" - -msgid "Radius" -msgstr "" - -msgid "Keep min" -msgstr "" - -msgid "Left mouse button:" -msgstr "" - -msgid "Add detail" -msgstr "" - -msgid "Right mouse button:" -msgstr "" - -msgid "Remove detail" -msgstr "" - -msgid "Shift + Left mouse button:" -msgstr "" - -msgid "Reset to base" -msgstr "" - -msgid "Shift + Right mouse button:" -msgstr "" - -msgid "Smoothing" -msgstr "" - -msgid "Mouse wheel:" -msgstr "" - -msgid "Increase/decrease edit area" -msgstr "" - -msgid "Sequence" -msgstr "" - -msgid "Mirror Object" -msgstr "" - -msgid "Tool Move" -msgstr "" - -msgid "Tool Rotate" -msgstr "" - -msgid "Move Object" -msgstr "" - -msgid "Auto Orientation options" -msgstr "" - -msgid "Enable rotation" -msgstr "" - -msgid "Optimize support interface area" -msgstr "" - -msgid "Orient" -msgstr "" - -msgid "Arrange options" -msgstr "" - -msgid "Spacing" -msgstr "" - -msgid "Auto rotate for arrangement" -msgstr "" - -msgid "Allow multiple materials on same plate" -msgstr "" - -msgid "Avoid extrusion calibration region" -msgstr "" - -msgid "Align to Y axis" -msgstr "" - -msgid "Add" -msgstr "" - -msgid "Add plate" -msgstr "" - -msgid "Auto orient" -msgstr "" - -msgid "Arrange all objects" -msgstr "" - -msgid "Arrange objects on selected plates" -msgstr "" - -msgid "Split to objects" -msgstr "" - -msgid "Split to parts" -msgstr "" - -msgid "Assembly View" -msgstr "" - -msgid "Select Plate" -msgstr "" - -msgid "Assembly Return" -msgstr "" - -msgid "return" -msgstr "" - -msgid "Paint Toolbar" -msgstr "" - -msgid "Explosion Ratio" -msgstr "" - -msgid "Section View" -msgstr "" - -msgid "Assemble Control" -msgstr "" - -msgid "Total Volume:" -msgstr "" - -msgid "Assembly Info" -msgstr "" - -msgid "Volume:" -msgstr "" - -msgid "Size:" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " -"separate the conflicted objects farther (%s <-> %s)." -msgstr "" - -msgid "An object is layed over the boundary of plate." -msgstr "" - -msgid "A G-code path goes beyond the max print height." -msgstr "" - -msgid "A G-code path goes beyond the boundary of plate." -msgstr "" - -msgid "Only the object being edit is visible." -msgstr "" - -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." -msgstr "" - -msgid "Calibration step selection" -msgstr "" - -msgid "Micro lidar calibration" -msgstr "" - -msgid "Bed leveling" -msgstr "" - -msgid "Vibration compensation" -msgstr "" - -msgid "Motor noise cancellation" -msgstr "" - -msgid "Calibration program" -msgstr "" - -msgid "" -"The calibration program detects the status of your device automatically to " -"minimize deviation.\n" -"It keeps the device performing optimally." -msgstr "" - -msgid "Calibration Flow" -msgstr "" - -msgid "Start Calibration" -msgstr "" - -msgid "Completed" -msgstr "" - -msgid "Calibrating" -msgstr "" - -msgid "No step selected" -msgstr "" - -msgid "Auto-record Monitoring" -msgstr "" - -msgid "Go Live" -msgstr "" - -msgid "Resolution" -msgstr "" - -msgid "Enable" -msgstr "" - -msgid "Hostname or IP" -msgstr "" - -msgid "Custom camera source" -msgstr "" - -msgid "Show \"Live Video\" guide page." -msgstr "" - -msgid "720p" -msgstr "" - -msgid "1080p" -msgstr "" - -msgid "ConnectPrinter(LAN)" -msgstr "" - -msgid "Please input the printer access code:" -msgstr "" - -msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" -"on the printer, as shown in the figure:" -msgstr "" - -msgid "Invalid input." -msgstr "" - -msgid "New Window" -msgstr "" - -msgid "Open a new window" -msgstr "" - -msgid "Application is closing" -msgstr "" - -msgid "Closing Application while some presets are modified." -msgstr "" - -msgid "Logging" -msgstr "" - -msgid "Prepare" -msgstr "" - -msgid "Preview" -msgstr "" - -msgid "Device" -msgstr "" - -msgid "Project" -msgstr "" - -msgid "Yes" -msgstr "" - -msgid "No" -msgstr "" - -msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "" - -msgid "Slice plate" -msgstr "" - -msgid "Print plate" -msgstr "" - -msgid "Slice all" -msgstr "" - -msgid "Export G-code file" -msgstr "" - -msgid "Send" -msgstr "" - -msgid "Export plate sliced file" -msgstr "" - -msgid "Export all sliced file" -msgstr "" - -msgid "Print all" -msgstr "" - -msgid "Send all" -msgstr "" - -msgid "Keyboard Shortcuts" -msgstr "" - -msgid "Show the list of the keyboard shortcuts" -msgstr "" - -msgid "Setup Wizard" -msgstr "" - -msgid "Show Configuration Folder" -msgstr "" - -msgid "Show Tip of the Day" -msgstr "" - -msgid "Check for Update" -msgstr "" - -msgid "Open Network Test" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "&About %s" -msgstr "" - -msgid "Upload Models" -msgstr "" - -msgid "Download Models" -msgstr "" - -msgid "Default View" -msgstr "" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "" - -msgid "Top View" -msgstr "" - -#. TRN To be shown in the main menu View->Bottom -msgid "Bottom" -msgstr "" - -msgid "Bottom View" -msgstr "" - -msgid "Front" -msgstr "" - -msgid "Front View" -msgstr "" - -msgid "Rear" -msgstr "" - -msgid "Rear View" -msgstr "" - -msgid "Left" -msgstr "" - -msgid "Left View" -msgstr "" - -msgid "Right" -msgstr "" - -msgid "Right View" -msgstr "" - -msgid "Start a new window" -msgstr "" - -msgid "New Project" -msgstr "" - -msgid "Start a new project" -msgstr "" - -msgid "Open a project file" -msgstr "" - -msgid "Recent projects" -msgstr "" - -msgid "Save Project" -msgstr "" - -msgid "Save current project to file" -msgstr "" - -msgid "Save Project as" -msgstr "" - -msgid "Shift+" -msgstr "" - -msgid "Save current project as" -msgstr "" - -msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" -msgstr "" - -msgid "Load a model" -msgstr "" - -msgid "Import Zip Archive" -msgstr "" - -msgid "Load models contained within a zip archive" -msgstr "" - -msgid "Import Configs" -msgstr "" - -msgid "Load configs" -msgstr "" - -msgid "Import" -msgstr "" - -msgid "Export all objects as one STL" -msgstr "" - -msgid "Export all objects as STLs" -msgstr "" - -msgid "Export Generic 3MF" -msgstr "" - -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "" - -msgid "Export current sliced file" -msgstr "" - -msgid "Export all plate sliced file" -msgstr "" - -msgid "Export G-code" -msgstr "" - -msgid "Export current plate as G-code" -msgstr "" - -msgid "Export &Configs" -msgstr "" - -msgid "Export current configuration to files" -msgstr "" - -msgid "Export" -msgstr "" - -msgid "Quit" -msgstr "" - -msgid "Undo" -msgstr "" - -msgid "Redo" -msgstr "" - -msgid "Cut selection to clipboard" -msgstr "" - -msgid "Copy" -msgstr "" - -msgid "Copy selection to clipboard" -msgstr "" - -msgid "Paste" -msgstr "" - -msgid "Paste clipboard" -msgstr "" - -msgid "Delete selected" -msgstr "" - -msgid "Deletes the current selection" -msgstr "" - -msgid "Delete all" -msgstr "" - -msgid "Deletes all objects" -msgstr "" - -msgid "Clone selected" -msgstr "" - -msgid "Clone copies of selections" -msgstr "" - -msgid "Select all" -msgstr "" - -msgid "Selects all objects" -msgstr "" - -msgid "Deselect all" -msgstr "" - -msgid "Deselects all objects" -msgstr "" - -msgid "Use Perspective View" -msgstr "" - -msgid "Use Orthogonal View" -msgstr "" - -msgid "Show &G-code Window" -msgstr "" - -msgid "Show g-code window in Previce scene" -msgstr "" - -msgid "Show 3D Navigator" -msgstr "" - -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "" - -msgid "Reset Window Layout" -msgstr "" - -msgid "Reset to default window layout" -msgstr "" - -msgid "Show &Labels" -msgstr "" - -msgid "Show object labels in 3D scene" -msgstr "" - -msgid "Show &Overhang" -msgstr "" - -msgid "Show object overhang highlight in 3D scene" -msgstr "" - -msgid "Preferences" -msgstr "" - -msgid "View" -msgstr "" - -msgid "Help" -msgstr "" - -msgid "Temperature Calibration" -msgstr "" - -msgid "Pass 1" -msgstr "" - -msgid "Flow rate test - Pass 1" -msgstr "" - -msgid "Pass 2" -msgstr "" - -msgid "Flow rate test - Pass 2" -msgstr "" - -msgid "Flow rate" -msgstr "" - -msgid "Pressure advance" -msgstr "" - -msgid "Retraction test" -msgstr "" - -msgid "Orca Tolerance Test" -msgstr "" - -msgid "Max flowrate" -msgstr "" - -msgid "VFA" -msgstr "" - -msgid "More..." -msgstr "" - -msgid "Tutorial" -msgstr "" - -msgid "Calibration help" -msgstr "" - -msgid "More calibrations" -msgstr "" - -msgid "&Open G-code" -msgstr "" - -msgid "Open a G-code file" -msgstr "" - -msgid "Re&load from Disk" -msgstr "" - -msgid "Reload the plater from disk" -msgstr "" - -msgid "Export &Toolpaths as OBJ" -msgstr "" - -msgid "Export toolpaths as OBJ" -msgstr "" - -msgid "Open &Studio" -msgstr "" - -msgid "Open Studio" -msgstr "" - -msgid "&Quit" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Quit %s" -msgstr "" - -msgid "&File" -msgstr "" - -msgid "&View" -msgstr "" - -msgid "&Help" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "" - -msgid "Overwrite file" -msgstr "" - -msgid "Yes to All" -msgstr "" - -msgid "No to All" -msgstr "" - -msgid "Choose a directory" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "There is %d config exported. (Only non-system configs)" -msgid_plural "There are %d configs exported. (Only non-system configs)" -msgstr[0] "" -msgstr[1] "" - -msgid "Export result" -msgstr "" - -msgid "Select profile to load:" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "There is %d config imported. (Only non-system and compatible configs)" -msgid_plural "" -"There are %d configs imported. (Only non-system and compatible configs)" -msgstr[0] "" -msgstr[1] "" - -msgid "" -"\n" -"Hint: Make sure you have added the corresponding printer before importing " -"the configs." -msgstr "" - -msgid "Import result" -msgstr "" - -msgid "File is missing" -msgstr "" - -msgid "The project is no longer available." -msgstr "" - -msgid "Filament Settings" -msgstr "" - -msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" -"It contains the following information:\n" -"1. The Process presets\n" -"2. The Filament presets\n" -"3. The Printer presets" -msgstr "" - -msgid "Synchronization" -msgstr "" - -msgid "Initialize failed (No Device)!" -msgstr "" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "" - -msgid "Initialize failed (No Camera Device)!" -msgstr "" - -msgid "Printer is busy downloading, Please wait for the downloading to finish." -msgstr "" - -msgid "Initialize failed (Not supported on the current printer version)!" -msgstr "" - -msgid "Initialize failed (Not accessible in LAN-only mode)!" -msgstr "" - -msgid "Initialize failed (Missing LAN ip of printer)!" -msgstr "" - -msgid "Initializing..." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Initialize failed (%s)!" -msgstr "" - -msgid "Network unreachable" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Stopped [%d]!" -msgstr "" - -msgid "Stopped." -msgstr "" - -msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "" - -msgid "" -"Virtual Camera Tools is required for this task!\n" -"Do you want to install them?" -msgstr "" - -msgid "Downloading Virtual Camera Tools" -msgstr "" - -msgid "" -"Another virtual camera is running.\n" -"Orca Slicer supports only a single virtual camera.\n" -"Do you want to stop this virtual camera?" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Virtual camera initialize failed (%s)!" -msgstr "" - -msgid "Information" -msgstr "" - -msgid "Playing..." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Load failed [%d]!" -msgstr "" - -msgid "Loading..." -msgstr "" - -msgid "Year" -msgstr "" - -msgid "Month" -msgstr "" - -msgid "All Files" -msgstr "" - -msgid "Group files by year, recent first." -msgstr "" - -msgid "Group files by month, recent first." -msgstr "" - -msgid "Show all files, recent first." -msgstr "" - -msgid "Timelapse" -msgstr "" - -msgid "Switch to timelapse files." -msgstr "" - -msgid "Video" -msgstr "" - -msgid "Switch to video files." -msgstr "" - -msgid "Switch to 3mf model files." -msgstr "" - -msgid "Delete selected files from printer." -msgstr "" - -msgid "Download" -msgstr "" - -msgid "Download selected files from printer." -msgstr "" - -msgid "Select" -msgstr "" - -msgid "Batch manage files." -msgstr "" - -msgid "No printers." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Connect failed [%d]!" -msgstr "" - -msgid "Loading file list..." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "No files [%d]" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Load failed [%d]" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "You are going to delete %u file from printer. Are you sure to continue?" -msgid_plural "" -"You are going to delete %u files from printer. Are you sure to continue?" -msgstr[0] "" -msgstr[1] "" - -msgid "Delete files" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Do you want to delete the file '%s' from printer?" -msgstr "" - -msgid "Delete file" -msgstr "" - -msgid "Fetching model infomations ..." -msgstr "" - -msgid "Failed to fetching model infomations from printer." -msgstr "" - -msgid "Failed to parse model infomations." -msgstr "" - -msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer " -"and export a new .gcode.3mf file." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "File '%s' was lost! Please download it again." -msgstr "" - -msgid "Download waiting..." -msgstr "" - -msgid "Play" -msgstr "" - -msgid "Open Folder" -msgstr "" - -msgid "Download finished" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Downloading %d%%..." -msgstr "" - -msgid "Connection lost. Please retry." -msgstr "" - -msgid "The device cannot handle more conversations. Please retry later." -msgstr "" - -msgid "File not exists." -msgstr "" - -msgid "File checksum error. Please retry." -msgstr "" - -msgid "Not supported on the current printer version." -msgstr "" - -msgid "Storage unavailable, insert SD card." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Error code: %d" -msgstr "" - -msgid "Speed:" -msgstr "" - -msgid "Deadzone:" -msgstr "" - -msgid "Options:" -msgstr "" - -msgid "Zoom" -msgstr "" - -msgid "Translation/Zoom" -msgstr "" - -msgid "3Dconnexion settings" -msgstr "" - -msgid "Swap Y/Z axes" -msgstr "" - -msgid "Invert X axis" -msgstr "" - -msgid "Invert Y axis" -msgstr "" - -msgid "Invert Z axis" -msgstr "" - -msgid "Invert Yaw axis" -msgstr "" - -msgid "Invert Pitch axis" -msgstr "" - -msgid "Invert Roll axis" -msgstr "" - -msgid "Printing Progress" -msgstr "" - -msgid "Resume" -msgstr "" - -msgid "Stop" -msgstr "" - -msgid "0" -msgstr "" - -msgid "Layer: N/A" -msgstr "" - -msgid "Clear" -msgstr "" - -msgid "" -"You have completed printing the mall model, \n" -"but the synchronization of rating information has failed." -msgstr "" - -msgid "How do you like this printing file?" -msgstr "" - -msgid "" -"(The model has already been rated. Your rating will overwrite the previous " -"rating.)" -msgstr "" - -msgid "Rate" -msgstr "" - -msgid "Camera" -msgstr "" - -msgid "SD Card" -msgstr "" - -msgid "Camera Setting" -msgstr "" - -msgid "Switch Camera View" -msgstr "" - -msgid "Control" -msgstr "" - -msgid "Print Options" -msgstr "" - -msgid "100%" -msgstr "" - -msgid "Lamp" -msgstr "" - -msgid "Aux" -msgstr "" - -msgid "Cham" -msgstr "" - -msgid "Bed" -msgstr "" - -msgid "Unload" -msgstr "" - -msgid "Debug Info" -msgstr "" - -msgid "No SD Card" -msgstr "" - -msgid "SD Card Abnormal" -msgstr "" - -msgid "Cancel print" -msgstr "" - -msgid "Are you sure you want to cancel this print?" -msgstr "" - -msgid "Downloading..." -msgstr "" - -msgid "Cloud Slicing..." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Layer: %s" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Layer: %d/%d" -msgstr "" - -msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." -msgstr "" - -msgid "Still unload" -msgstr "" - -msgid "Still load" -msgstr "" - -msgid "Please select an AMS slot before calibration" -msgstr "" - -msgid "" -"Cannot read filament info: the filament is loaded to the tool head,please " -"unload the filament and try again." -msgstr "" - -msgid "This only takes effect during printing" -msgstr "" - -msgid "Silent" -msgstr "" - -msgid "Standard" -msgstr "" - -msgid "Sport" -msgstr "" - -msgid "Ludicrous" -msgstr "" - -msgid "Can't start this without SD card." -msgstr "" - -msgid "Rate the Print Profile" -msgstr "" - -msgid "Comment" -msgstr "" - -msgid "Rate this print" -msgstr "" - -msgid "Add Photo" -msgstr "" - -msgid "Delete Photo" -msgstr "" - -msgid "Submit" -msgstr "" - -msgid "Please click on the star first." -msgstr "" - -msgid "InFo" -msgstr "" - -msgid "Get oss config failed." -msgstr "" - -msgid "Upload Pictrues" -msgstr "" - -msgid "Number of images successfully uploaded" -msgstr "" - -msgid " upload failed" -msgstr "" - -msgid " upload config prase failed\n" -msgstr "" - -msgid " No corresponding storage bucket\n" -msgstr "" - -msgid " can not be opened\n" -msgstr "" - -msgid "" -"The following issues occurred during the process of uploading images. Do you " -"want to ignore them?\n" -"\n" -msgstr "" - -msgid "info" -msgstr "" - -msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "" - -msgid "Upload failed\n" -msgstr "" - -msgid "obtaining instance_id failed\n" -msgstr "" - -msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" - -msgid "error message: " -msgstr "" - -msgid "" -"\n" -"\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" - -msgid "" -"Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" -msgstr "" - -msgid "You can select up to 16 images." -msgstr "" - -msgid "" -"At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." -msgstr "" - -msgid "Status" -msgstr "" - -msgid "Update" -msgstr "" - -msgid "HMS" -msgstr "" - -msgid "Don't show again" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s error" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s has encountered an error" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s warning" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s has a warning" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s info" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s information" -msgstr "" - -msgid "Skip" -msgstr "" - -msgid "3D Mouse disconnected." -msgstr "" - -msgid "Configuration can update now." -msgstr "" - -msgid "Detail." -msgstr "" - -msgid "Integration was successful." -msgstr "" - -msgid "Integration failed." -msgstr "" - -msgid "Undo integration was successful." -msgstr "" - -msgid "New network plug-in available." -msgstr "" - -msgid "Details" -msgstr "" - -msgid "New printer config available." -msgstr "" - -msgid "Wiki" -msgstr "" - -msgid "Undo integration failed." -msgstr "" - -msgid "Exporting." -msgstr "" - -msgid "Software has New version." -msgstr "" - -msgid "Goto download page." -msgstr "" - -msgid "Open Folder." -msgstr "" - -msgid "Safely remove hardware." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%1$d Object has custom supports." -msgid_plural "%1$d Objects have custom supports." -msgstr[0] "" -msgstr[1] "" - -#, possible-c-format, possible-boost-format -msgid "%1$d Object has color painting." -msgid_plural "%1$d Objects have color painting." -msgstr[0] "" -msgstr[1] "" - -#, possible-c-format, possible-boost-format -msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "" -msgstr[1] "" - -msgid "ERROR" -msgstr "" - -msgid "COMPLETED" -msgstr "" - -msgid "CANCELED" -msgstr "" - -msgid "Cancel upload" -msgstr "" - -msgid "Jump to" -msgstr "" - -msgid "Error:" -msgstr "" - -msgid "Warning:" -msgstr "" - -msgid "Export successfully." -msgstr "" - -msgid "Model file downloaded." -msgstr "" - -msgid "Serious warning:" -msgstr "" - -msgid " (Repair)" -msgstr "" - -msgid " Click here to install it." -msgstr "" - -msgid "WARNING:" -msgstr "" - -msgid "Your model needs support ! Please make support material enable." -msgstr "" - -msgid "Gcode path overlap" -msgstr "" - -msgid "Support painting" -msgstr "" - -msgid "Color painting" -msgstr "" - -msgid "Cut connectors" -msgstr "" - -msgid "Layers" -msgstr "" - -msgid "Range" -msgstr "" - -msgid "" -"The application cannot run normally because OpenGL version is lower than " -"2.0.\n" -msgstr "" - -msgid "Please upgrade your graphics card driver." -msgstr "" - -msgid "Unsupported OpenGL version" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Unable to load shaders:\n" -"%s" -msgstr "" - -msgid "Error loading shaders" -msgstr "" - -msgctxt "Layers" -msgid "Top" -msgstr "" - -msgctxt "Layers" -msgid "Bottom" -msgstr "" - -msgid "Enable AI monitoring of printing" -msgstr "" - -msgid "Sensitivity of pausing is" -msgstr "" - -msgid "Enable detection of build plate position" -msgstr "" - -msgid "" -"The localization tag of build plate is detected, and printing is paused if " -"the tag is not in predefined range." -msgstr "" - -msgid "First Layer Inspection" -msgstr "" - -msgid "Auto-recovery from step loss" -msgstr "" - -msgid "Allow Prompt Sound" -msgstr "" - -msgid "Filament Tangle Detect" -msgstr "" - -msgid "Global" -msgstr "" - -msgid "Objects" -msgstr "" - -msgid "Advance" -msgstr "" - -msgid "Compare presets" -msgstr "" - -msgid "View all object's settings" -msgstr "" - -msgid "Remove current plate (if not last one)" -msgstr "" - -msgid "Auto orient objects on current plate" -msgstr "" - -msgid "Arrange objects on current plate" -msgstr "" - -msgid "Unlock current plate" -msgstr "" - -msgid "Lock current plate" -msgstr "" - -msgid "Edit current plate name" -msgstr "" - -msgid "Customize current plate" -msgstr "" - -#, possible-boost-format -msgid " plate %1%:" -msgstr "" - -msgid "Invalid name, the following characters are not allowed:" -msgstr "" - -msgid "Sliced Info" -msgstr "" - -msgid "Used Filament (m)" -msgstr "" - -msgid "Used Filament (mm³)" -msgstr "" - -msgid "Used Filament (g)" -msgstr "" - -msgid "Used Materials" -msgstr "" - -msgid "Estimated time" -msgstr "" - -msgid "Filament changes" -msgstr "" - -msgid "Click to edit preset" -msgstr "" - -msgid "Connection" -msgstr "" - -msgid "Bed type" -msgstr "" - -msgid "Flushing volumes" -msgstr "" - -msgid "Add one filament" -msgstr "" - -msgid "Remove last filament" -msgstr "" - -msgid "Synchronize filament list from AMS" -msgstr "" - -msgid "Set filaments to use" -msgstr "" - -msgid "Search plate, object and part." -msgstr "" - -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "" - -msgid "Sync filaments with AMS" -msgstr "" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" - -msgid "Sync" -msgstr "" - -msgid "Resync" -msgstr "" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "" - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Orca Slicer or restart Orca Slicer to check if there is an update to system " -"presets." -msgstr "" - -#, possible-boost-format -msgid "Do you want to save changes to \"%1%\"?" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "" - -msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "" - -msgid "Restore" -msgstr "" - -msgid "" -"The current hot bed temperature is relatively high. The nozzle may be " -"clogged when printing this filament in a closed enclosure. Please open the " -"front door and/or remove the upper glass." -msgstr "" - -msgid "" -"The nozzle hardness required by the filament is higher than the default " -"nozzle hardness of the printer. Please replace the hardened nozzle or " -"filament, otherwise, the nozzle will be attrited or damaged." -msgstr "" - -msgid "" -"Enabling traditional timelapse photography may cause surface imperfections. " -"It is recommended to change to smooth mode." -msgstr "" - -msgid "Expand sidebar" -msgstr "" - -msgid "Collapse sidebar" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Loading file: %s" -msgstr "" - -msgid "The 3mf is not supported by OrcaSlicer, load geometry data only." -msgstr "" - -msgid "Load 3mf" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" -msgstr "" - -msgid "You'd better upgrade your software.\n" -msgstr "" - -msgid "Newer 3mf version" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." -msgstr "" - -msgid "Invalid values found in the 3mf:" -msgstr "" - -msgid "Please correct them in the param tabs" -msgstr "" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "" - -msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" -msgstr "" - -msgid "Modified G-codes" -msgstr "" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "" - -msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " -"damage to the machine!" -msgstr "" - -msgid "Customized Preset" -msgstr "" - -msgid "Name of components inside step file is not UTF8 format!" -msgstr "" - -msgid "The name may show garbage characters!" -msgstr "" - -#, possible-boost-format -msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "" - -msgid "Objects with zero volume removed" -msgstr "" - -msgid "The volume of the object is zero" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The object from file %s is too small, and maybe in meters or inches.\n" -" Do you want to scale to millimeters?" -msgstr "" - -msgid "Object too small" -msgstr "" - -msgid "" -"This file contains several objects positioned at multiple heights.\n" -"Instead of considering them as multiple objects, should \n" -"the file be loaded as a single object having multiple parts?" -msgstr "" - -msgid "Multi-part object detected" -msgstr "" - -msgid "Load these files as a single object with multiple parts?\n" -msgstr "" - -msgid "Object with multiple parts was detected" -msgstr "" - -msgid "The file does not contain any geometry data." -msgstr "" - -msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" -msgstr "" - -msgid "Object too large" -msgstr "" - -msgid "Export STL file:" -msgstr "" - -msgid "Export AMF file:" -msgstr "" - -msgid "Save file as:" -msgstr "" - -msgid "Export OBJ file:" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The file %s already exists\n" -"Do you want to replace it?" -msgstr "" - -msgid "Comfirm Save As" -msgstr "" - -msgid "Delete object which is a part of cut object" -msgstr "" - -msgid "" -"You try to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed." -msgstr "" - -msgid "The selected object couldn't be split." -msgstr "" - -msgid "Another export job is running." -msgstr "" - -msgid "Unable to replace with more than one volume" -msgstr "" - -msgid "Error during replace" -msgstr "" - -msgid "Replace from:" -msgstr "" - -msgid "Select a new file" -msgstr "" - -msgid "File for the replace wasn't selected" -msgstr "" - -msgid "Please select a file" -msgstr "" - -msgid "Do you want to replace it" -msgstr "" - -msgid "Message" -msgstr "" - -msgid "Reload from:" -msgstr "" - -msgid "Unable to reload:" -msgstr "" - -msgid "Error during reload" -msgstr "" - -msgid "Slicing" -msgstr "" - -msgid "There are warnings after slicing models:" -msgstr "" - -msgid "warnings" -msgstr "" - -msgid "Invalid data" -msgstr "" - -msgid "Slicing Canceled" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Slicing Plate %d" -msgstr "" - -msgid "Please resolve the slicing errors and publish again." -msgstr "" - -msgid "" -"Network Plug-in is not detected. Network related features are unavailable." -msgstr "" - -msgid "" -"Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" -msgstr "" - -msgid "You can keep the modified presets to the new project or discard them" -msgstr "" - -msgid "Creating a new project" -msgstr "" - -msgid "Load project" -msgstr "" - -msgid "" -"Failed to save the project.\n" -"Please check whether the folder exists online or if other programs open the " -"project file." -msgstr "" - -msgid "Save project" -msgstr "" - -msgid "Importing Model" -msgstr "" - -msgid "prepare 3mf file..." -msgstr "" - -msgid "downloading project ..." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Project downloaded %d%%" -msgstr "" - -msgid "" -"Importing to Orca Slicer failed. Please download the file and manually " -"import it." -msgstr "" - -msgid "Import SLA archive" -msgstr "" - -msgid "The selected file" -msgstr "" - -msgid "does not contain valid gcode." -msgstr "" - -msgid "Error occurs while loading G-code file" -msgstr "" - -#. TRN %1% is archive path -#, possible-boost-format -msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "" - -#. TRN: First argument = path to file, second argument = error description -#, possible-boost-format -msgid "Failed to unzip file to %1%: %2%" -msgstr "" - -#, possible-boost-format -msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." -msgstr "" - -msgid "Drop project file" -msgstr "" - -msgid "Please select an action" -msgstr "" - -msgid "Open as project" -msgstr "" - -msgid "Import geometry only" -msgstr "" - -msgid "Only one G-code file can be opened at the same time." -msgstr "" - -msgid "G-code loading" -msgstr "" - -msgid "G-code files can not be loaded with models together!" -msgstr "" - -msgid "Can not add models when in preview mode!" -msgstr "" - -msgid "Add Models" -msgstr "" - -msgid "All objects will be removed, continue?" -msgstr "" - -msgid "The current project has unsaved changes, save it before continue?" -msgstr "" - -msgid "Remember my choice." -msgstr "" - -msgid "Number of copies:" -msgstr "" - -msgid "Copies of the selected object" -msgstr "" - -msgid "Save G-code file as:" -msgstr "" - -msgid "Save SLA file as:" -msgstr "" - -msgid "The provided file name is not valid." -msgstr "" - -msgid "The following characters are not allowed by a FAT file system:" -msgstr "" - -msgid "Save Sliced file as:" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The file %s has been sent to the printer's storage space and can be viewed " -"on the printer." -msgstr "" - -msgid "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." -msgstr "" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" - -msgid "Is the printer ready? Is the print sheet in place, empty and clean?" -msgstr "" - -msgid "Upload and Print" -msgstr "" - -msgid "" -"Print By Object: \n" -"Suggest to use auto-arrange to avoid collisions when printing." -msgstr "" - -msgid "Send G-code" -msgstr "" - -msgid "Send to printer" -msgstr "" - -msgid "Custom supports and color painting were removed before repairing." -msgstr "" - -msgid "Optimize Rotation" -msgstr "" - -msgid "Invalid number" -msgstr "" - -msgid "Plate Settings" -msgstr "" - -#, possible-boost-format -msgid "Number of currently selected parts: %1%\n" -msgstr "" - -#, possible-boost-format -msgid "Number of currently selected objects: %1%\n" -msgstr "" - -#, possible-boost-format -msgid "Part name: %1%\n" -msgstr "" - -#, possible-boost-format -msgid "Object name: %1%\n" -msgstr "" - -#, possible-boost-format -msgid "Size: %1% x %2% x %3% in\n" -msgstr "" - -#, possible-boost-format -msgid "Size: %1% x %2% x %3% mm\n" -msgstr "" - -#, possible-boost-format -msgid "Volume: %1% in³\n" -msgstr "" - -#, possible-boost-format -msgid "Volume: %1% mm³\n" -msgstr "" - -#, possible-boost-format -msgid "Triangles: %1%\n" -msgstr "" - -msgid "Tips:" -msgstr "" - -msgid "" -"\"Fix Model\" feature is currently only on Windows. Please repair the model " -"on Orca Slicer(windows) or CAD softwares." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." -msgstr "" - -msgid "Switching the language requires application restart.\n" -msgstr "" - -msgid "Do you want to continue?" -msgstr "" - -msgid "Language selection" -msgstr "" - -msgid "Switching application language while some presets are modified." -msgstr "" - -msgid "Changing application language" -msgstr "" - -msgid "Changing the region will log out your account.\n" -msgstr "" - -msgid "Region selection" -msgstr "" - -msgid "Second" -msgstr "" - -msgid "Browse" -msgstr "" - -msgid "Choose Download Directory" -msgstr "" - -msgid "General Settings" -msgstr "" - -msgid "Asia-Pacific" -msgstr "" - -msgid "China" -msgstr "" - -msgid "Europe" -msgstr "" - -msgid "North America" -msgstr "" - -msgid "Others" -msgstr "" - -msgid "Login Region" -msgstr "" - -msgid "Stealth Mode" -msgstr "" - -msgid "Check for stable updates only" -msgstr "" - -msgid "Metric" -msgstr "" - -msgid "Imperial" -msgstr "" - -msgid "Units" -msgstr "" - -msgid "Home" -msgstr "" - -msgid "Default Page" -msgstr "" - -msgid "Set the page opened on startup." -msgstr "" - -msgid "Zoom to mouse position" -msgstr "" - -msgid "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." -msgstr "" - -msgid "Use free camera" -msgstr "" - -msgid "If enabled, use free camera. If not enabled, use constrained camera." -msgstr "" - -msgid "Show splash screen" -msgstr "" - -msgid "Show the splash screen during startup." -msgstr "" - -msgid "Show \"Tip of the day\" notification after start" -msgstr "" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "" - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "" - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" - -msgid "User Sync" -msgstr "" - -msgid "Update built-in Presets automatically." -msgstr "" - -msgid "System Sync" -msgstr "" - -msgid "Clear my choice on the unsaved presets." -msgstr "" - -msgid "Associate files to OrcaSlicer" -msgstr "" - -msgid "Associate .3mf files to OrcaSlicer" -msgstr "" - -msgid "If enabled, sets OrcaSlicer as default application to open .3mf files" -msgstr "" - -msgid "Associate .stl files to OrcaSlicer" -msgstr "" - -msgid "If enabled, sets OrcaSlicer as default application to open .stl files" -msgstr "" - -msgid "Associate .step/.stp files to OrcaSlicer" -msgstr "" - -msgid "If enabled, sets OrcaSlicer as default application to open .step files" -msgstr "" - -msgid "Maximum recent projects" -msgstr "" - -msgid "Maximum count of recent projects" -msgstr "" - -msgid "Clear my choice on the unsaved projects." -msgstr "" - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "" - -msgid "Auto-Backup" -msgstr "" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" - -msgid "every" -msgstr "" - -msgid "The peroid of backup in seconds." -msgstr "" - -msgid "Downloads" -msgstr "" - -msgid "Allow downloads from Printables.com" -msgstr "" - -msgid "Dark Mode" -msgstr "" - -msgid "Enable Dark mode" -msgstr "" - -msgid "Develop mode" -msgstr "" - -msgid "Skip AMS blacklist check" -msgstr "" - -msgid "Home page and daily tips" -msgstr "" - -msgid "Show home page on startup" -msgstr "" - -msgid "Sync settings" -msgstr "" - -msgid "User sync" -msgstr "" - -msgid "Preset sync" -msgstr "" - -msgid "Preferences sync" -msgstr "" - -msgid "View control settings" -msgstr "" - -msgid "Rotate of view" -msgstr "" - -msgid "Move of view" -msgstr "" - -msgid "Zoom of view" -msgstr "" - -msgid "Other" -msgstr "" - -msgid "Mouse wheel reverses when zooming" -msgstr "" - -msgid "Enable SSL(MQTT)" -msgstr "" - -msgid "Enable SSL(FTP)" -msgstr "" - -msgid "Internal developer mode" -msgstr "" - -msgid "Log Level" -msgstr "" - -msgid "fatal" -msgstr "" - -msgid "error" -msgstr "" - -msgid "warning" -msgstr "" - -msgid "debug" -msgstr "" - -msgid "trace" -msgstr "" - -msgid "Host Setting" -msgstr "" - -msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "" - -msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "" - -msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "" - -msgid "Product host" -msgstr "" - -msgid "debug save button" -msgstr "" - -msgid "save debug settings" -msgstr "" - -msgid "DEBUG settings have saved successfully!" -msgstr "" - -msgid "Switch cloud environment, Please login again!" -msgstr "" - -msgid "System presets" -msgstr "" - -msgid "User presets" -msgstr "" - -msgid "Incompatible presets" -msgstr "" - -msgid "AMS filaments" -msgstr "" - -msgid "Click to pick filament color" -msgstr "" - -msgid "Please choose the filament colour" -msgstr "" - -msgid "Add/Remove presets" -msgstr "" - -msgid "Edit preset" -msgstr "" - -msgid "Project-inside presets" -msgstr "" - -msgid "Add/Remove filaments" -msgstr "" - -msgid "Add/Remove materials" -msgstr "" - -msgid "Select/Remove printers(system presets)" -msgstr "" - -msgid "Create printer" -msgstr "" - -msgid "Incompatible" -msgstr "" - -msgid "The selected preset is null!" -msgstr "" - -msgid "Plate name" -msgstr "" - -msgid "Same as Global Print Sequence" -msgstr "" - -msgid "Print sequence" -msgstr "" - -msgid "Customize" -msgstr "" - -msgid "First layer filament sequence" -msgstr "" - -msgid "Same as Global Plate Type" -msgstr "" - -msgid "Same as Global Bed Type" -msgstr "" - -msgid "By Layer" -msgstr "" - -msgid "By Object" -msgstr "" - -msgid "Accept" -msgstr "" - -msgid "Log Out" -msgstr "" - -msgid "Slice all plate to obtain time and filament estimation" -msgstr "" - -msgid "Packing project data into 3mf file" -msgstr "" - -msgid "Uploading 3mf" -msgstr "" - -msgid "Jump to model publish web page" -msgstr "" - -msgid "Note: The preparation may takes several minutes. Please be patiant." -msgstr "" - -msgid "Publish" -msgstr "" - -msgid "Publish was cancelled" -msgstr "" - -msgid "Slicing Plate 1" -msgstr "" - -msgid "Packing data to 3mf" -msgstr "" - -msgid "Jump to webpage" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Save %s as" -msgstr "" - -msgid "User Preset" -msgstr "" - -msgid "Preset Inside Project" -msgstr "" - -msgid "Name is invalid;" -msgstr "" - -msgid "illegal characters:" -msgstr "" - -msgid "illegal suffix:" -msgstr "" - -msgid "Name is unavailable." -msgstr "" - -msgid "Overwrite a system profile is not allowed" -msgstr "" - -#, possible-boost-format -msgid "Preset \"%1%\" already exists." -msgstr "" - -#, possible-boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "" - -msgid "Please note that saving action will replace this preset" -msgstr "" - -msgid "The name is not allowed to be empty." -msgstr "" - -msgid "The name is not allowed to start with space character." -msgstr "" - -msgid "The name is not allowed to end with space character." -msgstr "" - -msgid "The name cannot be the same as a preset alias name." -msgstr "" - -msgid "Save preset" -msgstr "" - -msgctxt "PresetName" -msgid "Copy" -msgstr "" - -#, possible-boost-format -msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "" - -#, possible-boost-format -msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "" - -#, possible-boost-format -msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "" - -#, possible-boost-format -msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "" - -#, possible-boost-format -msgid "Simply switch to \"%1%\"" -msgstr "" - -msgid "Task canceled" -msgstr "" - -msgid "(LAN)" -msgstr "" - -msgid "Search" -msgstr "" - -msgid "My Device" -msgstr "" - -msgid "Other Device" -msgstr "" - -msgid "Online" -msgstr "" - -msgid "Input access code" -msgstr "" - -msgid "Can't find my devices?" -msgstr "" - -msgid "Log out successful." -msgstr "" - -msgid "Offline" -msgstr "" - -msgid "Busy" -msgstr "" - -msgid "Bambu Cool Plate" -msgstr "" - -msgid "PLA Plate" -msgstr "" - -msgid "Bambu Engineering Plate" -msgstr "" - -msgid "Bambu Smooth PEI Plate" -msgstr "" - -msgid "High temperature Plate" -msgstr "" - -msgid "Bambu Textured PEI Plate" -msgstr "" - -msgid "Send print job to" -msgstr "" - -msgid "Refresh" -msgstr "" - -msgid "Bed Leveling" -msgstr "" - -msgid "Flow Dynamics Calibration" -msgstr "" - -msgid "Click here if you can't connect to the printer" -msgstr "" - -msgid "send completed" -msgstr "" - -msgid "Error code" -msgstr "" - -msgid "Printer local connection failed, please try again." -msgstr "" - -msgid "No login account, only printers in LAN mode are displayed" -msgstr "" - -msgid "Connecting to server" -msgstr "" - -msgid "Synchronizing device information" -msgstr "" - -msgid "Synchronizing device information time out" -msgstr "" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" - -msgid "The printer is busy on other print job" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "" - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Filament %s does not match the filament in AMS slot %s. Please update the " -"printer firmware to support AMS slot assignment." -msgstr "" - -msgid "" -"Filament does not match the filament in AMS slot. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "" - -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" - -msgid "An SD card needs to be inserted before printing." -msgstr "" - -msgid "The selected printer is incompatible with the chosen printer presets." -msgstr "" - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "" - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" - -msgid "Cannot send the print job for empty plate" -msgstr "" - -msgid "This printer does not support printing all plates" -msgstr "" - -msgid "" -"When enable spiral vase mode, machines with I3 structure will not generate " -"timelapse videos." -msgstr "" - -msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." -msgstr "" - -msgid "Errors" -msgstr "" - -msgid "Please check the following:" -msgstr "" - -msgid "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." -msgstr "" - -msgid "" -"There are some unknown filaments in the AMS mappings. Please check whether " -"they are the required filaments. If they are okay, press \"Confirm\" to " -"start printing." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "nozzle in preset: %s %s" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "" - -msgid "" -"Please click the confirm button if you still want to proceed with printing." -msgstr "" - -msgid "Hardened Steel" -msgstr "" - -msgid "Stainless Steel" -msgstr "" - -msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "" - -msgid "Preparing print job" -msgstr "" - -msgid "Abnormal print file data. Please slice again" -msgstr "" - -msgid "The name length exceeds the limit." -msgstr "" - -msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgstr "" - -msgid "Automatic flow calibration using Micro Lidar" -msgstr "" - -msgid "Modifying the device name" -msgstr "" - -msgid "Send to Printer SD card" -msgstr "" - -msgid "Cannot send the print task when the upgrade is in progress" -msgstr "" - -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "" - -msgid "The printer is required to be in the same LAN as Orca Slicer." -msgstr "" - -msgid "The printer does not support sending to printer SD card." -msgstr "" - -msgid "Slice ok." -msgstr "" - -msgid "View all Daily tips" -msgstr "" - -msgid "Failed to create socket" -msgstr "" - -msgid "Failed to connect socket" -msgstr "" - -msgid "Failed to publish login request" -msgstr "" - -msgid "Get ticket from device timeout" -msgstr "" - -msgid "Get ticket from server timeout" -msgstr "" - -msgid "Failed to post ticket to server" -msgstr "" - -msgid "Failed to parse login report reason" -msgstr "" - -msgid "Receive login report timeout" -msgstr "" - -msgid "Unknown Failure" -msgstr "" - -msgid "Log in printer" -msgstr "" - -msgid "Would you like to log in this printer with current account?" -msgstr "" - -msgid "Check the reason" -msgstr "" - -msgid "Read and accept" -msgstr "" - -msgid "Terms and Conditions" -msgstr "" - -msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" - -msgid "and" -msgstr "" - -msgid "Privacy Policy" -msgstr "" - -msgid "We ask for your help to improve everyone's printer" -msgstr "" - -msgid "Statement about User Experience Improvement Program" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." -msgstr "" - -msgid "Statement on User Experience Improvement Plan" -msgstr "" - -msgid "Log in successful." -msgstr "" - -msgid "Log out printer" -msgstr "" - -msgid "Would you like to log out the printer?" -msgstr "" - -msgid "Please log in first." -msgstr "" - -msgid "There was a problem connecting to the printer. Please try again." -msgstr "" - -msgid "Failed to log out." -msgstr "" - -#. TRN "Save current Settings" -#, possible-c-format, possible-boost-format -msgid "Save current %s" -msgstr "" - -msgid "Delete this preset" -msgstr "" - -msgid "Search in preset" -msgstr "" - -msgid "Click to reset all settings to the last saved preset." -msgstr "" - -msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " -"model without prime tower. Are you sure you want to disable prime tower?" -msgstr "" - -msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " -"model without prime tower. Do you want to enable prime tower?" -msgstr "" - -msgid "Still print by object?" -msgstr "" - -msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." -msgstr "" - -msgid "" -"Change these settings automatically? \n" -"Yes - Change these settings automatically\n" -"No - Do not change these settings for me" -msgstr "" - -msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" - -msgid "" -"When using support material for the support interface, We recommend the " -"following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" -msgstr "" - -msgid "" -"Enabling this option will modify the model's shape. If your print requires " -"precise dimensions or is part of an assembly, it's important to double-check " -"whether this change in geometry impacts the functionality of your print." -msgstr "" - -msgid "Are you sure you want to enable this option?" -msgstr "" - -msgid "" -"Layer height is too small.\n" -"It will set to min_layer_height\n" -msgstr "" - -msgid "" -"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." -msgstr "" - -msgid "Adjust to the set range automatically? \n" -msgstr "" - -msgid "Adjust" -msgstr "" - -msgid "Ignore" -msgstr "" - -msgid "" -"When using scarf joint, we recommend the following settings:\n" -"print outer wall first, disable wipe before external loop, reduce outer wall " -"speed to no greater than 50mm/s, and don't use random or nearest seam " -"position" -msgstr "" - -msgid "" -"When recording timelapse without toolhead, it is recommended to add a " -"\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." -msgstr "" - -msgid "Line width" -msgstr "" - -msgid "Seam" -msgstr "" - -msgid "Precision" -msgstr "" - -msgid "Wall generator" -msgstr "" - -msgid "Walls and surfaces" -msgstr "" - -msgid "Bridging" -msgstr "" - -msgid "Overhangs" -msgstr "" - -msgid "Walls" -msgstr "" - -msgid "Top/bottom shells" -msgstr "" - -msgid "Initial layer speed" -msgstr "" - -msgid "Other layers speed" -msgstr "" - -msgid "Overhang speed" -msgstr "" - -msgid "" -"This is the speed for various overhang degrees. Overhang degrees are " -"expressed as a percentage of line width. 0 speed means no slowing down for " -"the overhang degree range and wall speed is used" -msgstr "" - -msgid "Bridge" -msgstr "" - -msgid "Set speed for external and internal bridges" -msgstr "" - -msgid "Travel speed" -msgstr "" - -msgid "Acceleration" -msgstr "" - -msgid "Jerk(XY)" -msgstr "" - -msgid "Raft" -msgstr "" - -msgid "Support filament" -msgstr "" - -msgid "Tree supports" -msgstr "" - -msgid "Prime tower" -msgstr "" - -msgid "Special mode" -msgstr "" - -msgid "G-code output" -msgstr "" - -msgid "Post-processing Scripts" -msgstr "" - -msgid "Notes" -msgstr "" - -msgid "Frequent" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Following line %s contains reserved keywords.\n" -"Please remove it, or will beat G-code visualization and printing time " -"estimation." -msgid_plural "" -"Following lines %s contain reserved keywords.\n" -"Please remove them, or will beat G-code visualization and printing time " -"estimation." -msgstr[0] "" -msgstr[1] "" - -msgid "Reserved keywords found" -msgstr "" - -msgid "Setting Overrides" -msgstr "" - -msgid "Retraction" -msgstr "" - -msgid "Basic information" -msgstr "" - -msgid "Recommended nozzle temperature" -msgstr "" - -msgid "Recommended nozzle temperature range of this filament. 0 means no set" -msgstr "" - -msgid "Print chamber temperature" -msgstr "" - -msgid "Print temperature" -msgstr "" - -msgid "Nozzle" -msgstr "" - -msgid "Nozzle temperature when printing" -msgstr "" - -msgid "Cool plate" -msgstr "" - -msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" -msgstr "" - -msgid "Engineering plate" -msgstr "" - -msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" -msgstr "" - -msgid "Smooth PEI Plate / High Temp Plate" -msgstr "" - -msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" -msgstr "" - -msgid "Textured PEI Plate" -msgstr "" - -msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" -msgstr "" - -msgid "Volumetric speed limitation" -msgstr "" - -msgid "Cooling" -msgstr "" - -msgid "Cooling for specific layer" -msgstr "" - -msgid "Part cooling fan" -msgstr "" - -msgid "Min fan speed threshold" -msgstr "" - -msgid "" -"Part cooling fan speed will start to run at min speed when the estimated " -"layer time is no longer than the layer time in setting. When layer time is " -"shorter than threshold, fan speed is interpolated between the minimum and " -"maximum fan speed according to layer printing time" -msgstr "" - -msgid "Max fan speed threshold" -msgstr "" - -msgid "" -"Part cooling fan speed will be max when the estimated layer time is shorter " -"than the setting value" -msgstr "" - -msgid "Auxiliary part cooling fan" -msgstr "" - -msgid "Exhaust fan" -msgstr "" - -msgid "During print" -msgstr "" - -msgid "Complete print" -msgstr "" - -msgid "Filament start G-code" -msgstr "" - -msgid "Filament end G-code" -msgstr "" - -msgid "Multimaterial" -msgstr "" - -msgid "Wipe tower parameters" -msgstr "" - -msgid "Toolchange parameters with single extruder MM printers" -msgstr "" - -msgid "Ramming settings" -msgstr "" - -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "" - -msgid "Printable space" -msgstr "" - -msgid "Cooling Fan" -msgstr "" - -msgid "Fan speed-up time" -msgstr "" - -msgid "Extruder Clearance" -msgstr "" - -msgid "Adaptive bed mesh" -msgstr "" - -msgid "Accessory" -msgstr "" - -msgid "Machine gcode" -msgstr "" - -msgid "Machine start G-code" -msgstr "" - -msgid "Machine end G-code" -msgstr "" - -msgid "Printing by object G-code" -msgstr "" - -msgid "Before layer change G-code" -msgstr "" - -msgid "Layer change G-code" -msgstr "" - -msgid "Time lapse G-code" -msgstr "" - -msgid "Change filament G-code" -msgstr "" - -msgid "Change extrusion role G-code" -msgstr "" - -msgid "Pause G-code" -msgstr "" - -msgid "Template Custom G-code" -msgstr "" - -msgid "Motion ability" -msgstr "" - -msgid "Normal" -msgstr "" - -msgid "Speed limitation" -msgstr "" - -msgid "Acceleration limitation" -msgstr "" - -msgid "Jerk limitation" -msgstr "" - -msgid "Single extruder multimaterial setup" -msgstr "" - -msgid "Wipe tower" -msgstr "" - -msgid "Single extruder multimaterial parameters" -msgstr "" - -msgid "Layer height limits" -msgstr "" - -msgid "Lift Z Enforcement" -msgstr "" - -msgid "Retraction when switching material" -msgstr "" - -msgid "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Shall I disable it in order to enable Firmware Retraction?" -msgstr "" - -msgid "Firmware Retraction" -msgstr "" - -msgid "Detached" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"%d Filament Preset and %d Process Preset is attached to this printer. Those " -"presets would be deleted if the printer is deleted." -msgstr "" - -msgid "Presets inherited by other presets can not be deleted!" -msgstr "" - -msgid "The following presets inherit this preset." -msgid_plural "The following preset inherits this preset." -msgstr[0] "" -msgstr[1] "" - -#. TRN Remove/Delete -#, possible-boost-format -msgid "%1% Preset" -msgstr "" - -msgid "Following preset will be deleted too." -msgid_plural "Following presets will be deleted too." -msgstr[0] "" -msgstr[1] "" - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" - -#, possible-boost-format -msgid "Are you sure to %1% the selected preset?" -msgstr "" - -msgid "All" -msgstr "" - -msgid "Set" -msgstr "" - -msgid "Click to reset current value and attach to the global value." -msgstr "" - -msgid "Click to drop current modify and reset to saved value." -msgstr "" - -msgid "Process Settings" -msgstr "" - -msgid "Undef" -msgstr "" - -msgid "Unsaved Changes" -msgstr "" - -msgid "Transfer or discard changes" -msgstr "" - -msgid "Old Value" -msgstr "" - -msgid "New Value" -msgstr "" - -msgid "Transfer" -msgstr "" - -msgid "Don't save" -msgstr "" - -msgid "Discard" -msgstr "" - -msgid "Click the right mouse button to display the full text." -msgstr "" - -msgid "All changes will not be saved" -msgstr "" - -msgid "All changes will be discarded." -msgstr "" - -msgid "Save the selected options." -msgstr "" - -msgid "Keep the selected options." -msgstr "" - -msgid "Transfer the selected options to the newly selected preset." -msgstr "" - -#, possible-boost-format -msgid "" -"Save the selected options to preset \n" -"\"%1%\"." -msgstr "" - -#, possible-boost-format -msgid "" -"Transfer the selected options to the newly selected preset \n" -"\"%1%\"." -msgstr "" - -#, possible-boost-format -msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "" - -#, possible-boost-format -msgid "" -"Preset \"%1%\" is not compatible with the new printer profile and it " -"contains the following unsaved changes:" -msgstr "" - -#, possible-boost-format -msgid "" -"Preset \"%1%\" is not compatible with the new process profile and it " -"contains the following unsaved changes:" -msgstr "" - -#, possible-boost-format -msgid "" -"You have changed some settings of preset \"%1%\". \n" -"Would you like to keep these changed settings (new value) after switching " -"preset?" -msgstr "" - -msgid "" -"You have changed some preset settings. \n" -"Would you like to keep these changed settings (new value) after switching " -"preset?" -msgstr "" - -msgid "Extruders count" -msgstr "" - -msgid "General" -msgstr "" - -msgid "Capabilities" -msgstr "" - -msgid "Show all presets (including incompatible)" -msgstr "" - -msgid "Select presets to compare" -msgstr "" - -msgid "" -"You can only transfer to current active profile because it has been modified." -msgstr "" - -msgid "" -"Transfer the selected options from left preset to the right.\n" -"Note: New modified presets will be selected in settings tabs after close " -"this dialog." -msgstr "" - -msgid "Transfer values from left to right" -msgstr "" - -msgid "" -"If enabled, this dialog can be used for transver selected values from left " -"to right preset." -msgstr "" - -msgid "Add File" -msgstr "" - -msgid "Set as cover" -msgstr "" - -msgid "Cover" -msgstr "" - -#, possible-boost-format -msgid "The name \"%1%\" already exists." -msgstr "" - -msgid "Basic Info" -msgstr "" - -msgid "Pictures" -msgstr "" - -msgid "Bill of Materials" -msgstr "" - -msgid "Assembly Guide" -msgstr "" - -msgid "Author" -msgstr "" - -msgid "Model Name" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s Update" -msgstr "" - -msgid "A new version is available" -msgstr "" - -msgid "Configuration update" -msgstr "" - -msgid "A new configuration package available, Do you want to install it?" -msgstr "" - -msgid "Description:" -msgstr "" - -msgid "Configuration incompatible" -msgstr "" - -msgid "the configuration package is incompatible with current application." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Exit %s" -msgstr "" - -msgid "the Configuration package is incompatible with current APP." -msgstr "" - -msgid "Configuration updates" -msgstr "" - -msgid "No updates available." -msgstr "" - -msgid "The configuration is up to date." -msgstr "" - -msgid "Ramming customization" -msgstr "" - -msgid "" -"Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the " -"unloaded filament so it does not prevent insertion of the new filament and " -"can itself be reinserted later. This phase is important and different " -"materials can require different extrusion speeds to get the good shape. For " -"this reason, the extrusion rates during ramming are adjustable.\n" -"\n" -"This is an expert-level setting, incorrect adjustment will likely lead to " -"jams, extruder wheel grinding into filament etc." -msgstr "" - -msgid "Total ramming time" -msgstr "" - -msgid "s" -msgstr "" - -msgid "Total rammed volume" -msgstr "" - -msgid "Ramming line width" -msgstr "" - -msgid "Ramming line spacing" -msgstr "" - -msgid "Auto-Calc" -msgstr "" - -msgid "Re-calculate" -msgstr "" - -msgid "Flushing volumes for filament change" -msgstr "" - -msgid "" -"Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Orca Slicer > Preferences" -msgstr "" - -msgid "Flushing volume (mm³) for each filament pair." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "The multiplier should be in range [%.2f, %.2f]." -msgstr "" - -msgid "Multiplier" -msgstr "" - -msgid "unloaded" -msgstr "" - -msgid "loaded" -msgstr "" - -msgid "Filament #" -msgstr "" - -msgid "From" -msgstr "" - -msgid "To" -msgstr "" - -msgid "Bambu Network plug-in not detected." -msgstr "" - -msgid "Click here to download it." -msgstr "" - -msgid "Login" -msgstr "" - -msgid "The configuration package is changed in previous Config Guide" -msgstr "" - -msgid "Configuration package changed" -msgstr "" - -msgid "Toolbar" -msgstr "" - -msgid "Objects list" -msgstr "" - -msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "" - -msgid "⌘+Shift+G" -msgstr "" - -msgid "Ctrl+Shift+G" -msgstr "" - -msgid "Paste from clipboard" -msgstr "" - -msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "" - -msgid "Switch table page" -msgstr "" - -msgid "Show keyboard shortcuts list" -msgstr "" - -msgid "Global shortcuts" -msgstr "" - -msgid "Rotate View" -msgstr "" - -msgid "Pan View" -msgstr "" - -msgid "Mouse wheel" -msgstr "" - -msgid "Zoom View" -msgstr "" - -msgid "Shift+A" -msgstr "" - -msgid "Shift+R" -msgstr "" - -msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." -msgstr "" - -msgid "Shift+Tab" -msgstr "" - -msgid "Collapse/Expand the sidebar" -msgstr "" - -msgid "⌘+Any arrow" -msgstr "" - -msgid "Movement in camera space" -msgstr "" - -msgid "⌥+Left mouse button" -msgstr "" - -msgid "Select a part" -msgstr "" - -msgid "⌘+Left mouse button" -msgstr "" - -msgid "Select multiple objects" -msgstr "" - -msgid "Ctrl+Any arrow" -msgstr "" - -msgid "Alt+Left mouse button" -msgstr "" - -msgid "Ctrl+Left mouse button" -msgstr "" - -msgid "Shift+Left mouse button" -msgstr "" - -msgid "Select objects by rectangle" -msgstr "" - -msgid "Arrow Up" -msgstr "" - -msgid "Move selection 10 mm in positive Y direction" -msgstr "" - -msgid "Arrow Down" -msgstr "" - -msgid "Move selection 10 mm in negative Y direction" -msgstr "" - -msgid "Arrow Left" -msgstr "" - -msgid "Move selection 10 mm in negative X direction" -msgstr "" - -msgid "Arrow Right" -msgstr "" - -msgid "Move selection 10 mm in positive X direction" -msgstr "" - -msgid "Shift+Any arrow" -msgstr "" - -msgid "Movement step set to 1 mm" -msgstr "" - -msgid "keyboard 1-9: set filament for object/part" -msgstr "" - -msgid "Camera view - Default" -msgstr "" - -msgid "Camera view - Top" -msgstr "" - -msgid "Camera view - Bottom" -msgstr "" - -msgid "Camera view - Front" -msgstr "" - -msgid "Camera view - Behind" -msgstr "" - -msgid "Camera Angle - Left side" -msgstr "" - -msgid "Camera Angle - Right side" -msgstr "" - -msgid "Select all objects" -msgstr "" - -msgid "Gizmo move" -msgstr "" - -msgid "Gizmo scale" -msgstr "" - -msgid "Gizmo rotate" -msgstr "" - -msgid "Gizmo cut" -msgstr "" - -msgid "Gizmo Place face on bed" -msgstr "" - -msgid "Gizmo SLA support points" -msgstr "" - -msgid "Gizmo FDM paint-on seam" -msgstr "" - -msgid "Gizmo Text emboss / engrave" -msgstr "" - -msgid "Zoom in" -msgstr "" - -msgid "Zoom out" -msgstr "" - -msgid "Switch between Prepare/Preview" -msgstr "" - -msgid "Plater" -msgstr "" - -msgid "Move: press to snap by 1mm" -msgstr "" - -msgid "⌘+Mouse wheel" -msgstr "" - -msgid "Support/Color Painting: adjust pen radius" -msgstr "" - -msgid "⌥+Mouse wheel" -msgstr "" - -msgid "Support/Color Painting: adjust section position" -msgstr "" - -msgid "Ctrl+Mouse wheel" -msgstr "" - -msgid "Alt+Mouse wheel" -msgstr "" - -msgid "Gizmo" -msgstr "" - -msgid "Set extruder number for the objects and parts" -msgstr "" - -msgid "Delete objects, parts, modifiers " -msgstr "" - -msgid "Select the object/part and press space to change the name" -msgstr "" - -msgid "Mouse click" -msgstr "" - -msgid "Select the object/part and mouse click to change the name" -msgstr "" - -msgid "Objects List" -msgstr "" - -msgid "Vertical slider - Move active thumb Up" -msgstr "" - -msgid "Vertical slider - Move active thumb Down" -msgstr "" - -msgid "Horizontal slider - Move active thumb Left" -msgstr "" - -msgid "Horizontal slider - Move active thumb Right" -msgstr "" - -msgid "On/Off one layer mode of the vertical slider" -msgstr "" - -msgid "On/Off g-code window" -msgstr "" - -msgid "Move slider 5x faster" -msgstr "" - -msgid "Shift+Mouse wheel" -msgstr "" - -msgid "Release Note" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "version %s update information :" -msgstr "" - -msgid "Network plug-in update" -msgstr "" - -msgid "" -"Click OK to update the Network plug-in when Orca Slicer launches next time." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "" - -msgid "New version of Orca Slicer" -msgstr "" - -msgid "Skip this Version" -msgstr "" - -msgid "Done" -msgstr "" - -msgid "Confirm and Update Nozzle" -msgstr "" - -msgid "LAN Connection Failed (Sending print file)" -msgstr "" - -msgid "" -"Step 1, please confirm Orca Slicer and your printer are in the same LAN." -msgstr "" - -msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." -msgstr "" - -msgid "IP" -msgstr "" - -msgid "Access Code" -msgstr "" - -msgid "Where to find your printer's IP and Access Code?" -msgstr "" - -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" - -msgid "Test" -msgstr "" - -msgid "IP and Access Code Verified! You may close the window" -msgstr "" - -msgid "Connection failed, please double check IP and Access Code" -msgstr "" - -msgid "" -"Connection failed! If your IP and Access Code is correct, \n" -"please move to step 3 for troubleshooting network issues" -msgstr "" - -msgid "Model:" -msgstr "" - -msgid "Serial:" -msgstr "" - -msgid "Version:" -msgstr "" - -msgid "Update firmware" -msgstr "" - -msgid "Printing" -msgstr "" - -msgid "Idle" -msgstr "" - -msgid "Beta version" -msgstr "" - -msgid "Latest version" -msgstr "" - -msgid "Updating" -msgstr "" - -msgid "Updating failed" -msgstr "" - -msgid "Updating successful" -msgstr "" - -msgid "" -"Are you sure you want to update? This will take about 10 minutes. Do not " -"turn off the power while the printer is updating." -msgstr "" - -msgid "" -"An important update was detected and needs to be run before printing can " -"continue. Do you want to update now? You can also update later from 'Upgrade " -"firmware'." -msgstr "" - -msgid "" -"The firmware version is abnormal. Repairing and updating are required before " -"printing. Do you want to update now? You can also update later on printer or " -"update next time starting the studio." -msgstr "" - -msgid "Extension Board" -msgstr "" - -msgid "Saving objects into the 3mf failed." -msgstr "" - -msgid "Only Windows 10 is supported." -msgstr "" - -msgid "Failed to initialize the WinRT library." -msgstr "" - -msgid "Exporting objects" -msgstr "" - -msgid "Failed loading objects." -msgstr "" - -msgid "Repairing object by Windows service" -msgstr "" - -msgid "Repair failed." -msgstr "" - -msgid "Loading repaired objects" -msgstr "" - -msgid "Exporting 3mf file failed" -msgstr "" - -msgid "Import 3mf file failed" -msgstr "" - -msgid "Repaired 3mf file does not contain any object" -msgstr "" - -msgid "Repaired 3mf file contains more than one object" -msgstr "" - -msgid "Repaired 3mf file does not contain any volume" -msgstr "" - -msgid "Repaired 3mf file contains more than one volume" -msgstr "" - -msgid "Repair finished" -msgstr "" - -msgid "Repair canceled" -msgstr "" - -#, possible-boost-format -msgid "Copying of file %1% to %2% failed: %3%" -msgstr "" - -msgid "Need to check the unsaved changes before configuration updates." -msgstr "" - -msgid "Configuration package: " -msgstr "" - -msgid " updated to " -msgstr "" - -msgid "Open G-code file:" -msgstr "" - -msgid "" -"One object has empty initial layer and can't be printed. Please Cut the " -"bottom or enable supports." -msgstr "" - -#, possible-boost-format -msgid "Object can't be printed for empty layer between %1% and %2%." -msgstr "" - -#, possible-boost-format -msgid "Object: %1%" -msgstr "" - -msgid "" -"Maybe parts of the object at these height are too thin, or the object has " -"faulty mesh" -msgstr "" - -msgid "No object can be printed. Maybe too small" -msgstr "" - -msgid "" -"Failed to generate gcode for invalid custom G-code.\n" -"\n" -msgstr "" - -msgid "Please check the custom G-code or use the default custom G-code." -msgstr "" - -#, possible-boost-format -msgid "Generating G-code: layer %1%" -msgstr "" - -msgid "Inner wall" -msgstr "" - -msgid "Outer wall" -msgstr "" - -msgid "Overhang wall" -msgstr "" - -msgid "Sparse infill" -msgstr "" - -msgid "Internal solid infill" -msgstr "" - -msgid "Top surface" -msgstr "" - -msgid "Bottom surface" -msgstr "" - -msgid "Internal Bridge" -msgstr "" - -msgid "Gap infill" -msgstr "" - -msgid "Skirt" -msgstr "" - -msgid "Support interface" -msgstr "" - -msgid "Support transition" -msgstr "" - -msgid "Multiple" -msgstr "" - -#, possible-boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " -msgstr "" - -msgid "" -"Invalid spacing supplied to Flow::with_spacing(), check your layer height " -"and extrusion width" -msgstr "" - -msgid "undefined error" -msgstr "" - -msgid "too many files" -msgstr "" - -msgid "file too large" -msgstr "" - -msgid "unsupported method" -msgstr "" - -msgid "unsupported encryption" -msgstr "" - -msgid "unsupported feature" -msgstr "" - -msgid "failed finding central directory" -msgstr "" - -msgid "not a ZIP archive" -msgstr "" - -msgid "invalid header or corrupted" -msgstr "" - -msgid "unsupported multidisk" -msgstr "" - -msgid "decompression failed" -msgstr "" - -msgid "compression failed" -msgstr "" - -msgid "unexpected decompressed size" -msgstr "" - -msgid "CRC check failed" -msgstr "" - -msgid "unsupported central directory size" -msgstr "" - -msgid "allocation failed" -msgstr "" - -msgid "file open failed" -msgstr "" - -msgid "file create failed" -msgstr "" - -msgid "file write failed" -msgstr "" - -msgid "file read failed" -msgstr "" - -msgid "file close failed" -msgstr "" - -msgid "file seek failed" -msgstr "" - -msgid "file stat failed" -msgstr "" - -msgid "invalid parameter" -msgstr "" - -msgid "invalid filename" -msgstr "" - -msgid "buffer too small" -msgstr "" - -msgid "internal error" -msgstr "" - -msgid "file not found" -msgstr "" - -msgid "archive too large" -msgstr "" - -msgid "validation failed" -msgstr "" - -msgid "write callback failed" -msgstr "" - -#, possible-boost-format -msgid "" -"%1% is too close to exclusion area, there may be collisions when printing." -msgstr "" - -#, possible-boost-format -msgid "%1% is too close to others, and collisions may be caused." -msgstr "" - -#, possible-boost-format -msgid "%1% is too tall, and collisions will be caused." -msgstr "" - -msgid " is too close to others, there may be collisions when printing." -msgstr "" - -msgid " is too close to exclusion area, there may be collisions when printing." -msgstr "" - -msgid "Prime Tower" -msgstr "" - -msgid " is too close to others, and collisions may be caused.\n" -msgstr "" - -msgid " is too close to exclusion area, and collisions will be caused.\n" -msgstr "" - -msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" -msgstr "" - -msgid "No extrusions under current settings." -msgstr "" - -msgid "" -"Smooth mode of timelapse is not supported when \"by object\" sequence is " -"enabled." -msgstr "" - -msgid "" -"Please select \"By object\" print sequence to print multiple objects in " -"spiral vase mode." -msgstr "" - -msgid "" -"The spiral vase mode does not work when an object contains more than one " -"materials." -msgstr "" - -#, possible-boost-format -msgid "The object %1% exceeds the maximum build volume height." -msgstr "" - -#, possible-boost-format -msgid "" -"While the object %1% itself fits the build volume, its last layer exceeds " -"the maximum build volume height." -msgstr "" - -msgid "" -"You might want to reduce the size of your model or change current print " -"settings and retry." -msgstr "" - -msgid "Variable layer height is not supported with Organic supports." -msgstr "" - -msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." -msgstr "" - -msgid "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." -msgstr "" - -msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." -msgstr "" - -msgid "" -"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " -"RepRapFirmware and Repetier G-code flavors." -msgstr "" - -msgid "The prime tower is not supported in \"By object\" print." -msgstr "" - -msgid "" -"The prime tower is not supported when adaptive layer height is on. It " -"requires that all objects have the same layer height." -msgstr "" - -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "" - -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "" - -msgid "" -"The prime tower requires that all objects are printed over the same number " -"of raft layers" -msgstr "" - -msgid "" -"The prime tower requires that all objects are sliced with the same layer " -"heights." -msgstr "" - -msgid "" -"The prime tower is only supported if all objects have the same variable " -"layer height" -msgstr "" - -msgid "Too small line width" -msgstr "" - -msgid "Too large line width" -msgstr "" - -msgid "" -"The prime tower requires that support has the same layer height with object." -msgstr "" - -msgid "" -"Organic support tree tip diameter must not be smaller than support material " -"extrusion width." -msgstr "" - -msgid "" -"Organic support branch diameter must not be smaller than 2x support material " -"extrusion width." -msgstr "" - -msgid "" -"Organic support branch diameter must not be smaller than support tree tip " -"diameter." -msgstr "" - -msgid "" -"Support enforcers are used but support is not enabled. Please enable support." -msgstr "" - -msgid "Layer height cannot exceed nozzle diameter" -msgstr "" - -msgid "" -"Relative extruder addressing requires resetting the extruder position at " -"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " -"layer_gcode." -msgstr "" - -msgid "" -"\"G92 E0\" was found in before_layer_gcode, which is incompatible with " -"absolute extruder addressing." -msgstr "" - -msgid "" -"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " -"extruder addressing." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Plate %d: %s does not support filament %s" -msgstr "" - -msgid "" -"Setting the jerk speed too low could lead to artifacts on curved surfaces" -msgstr "" - -msgid "Generating skirt & brim" -msgstr "" - -msgid "Exporting G-code" -msgstr "" - -msgid "Generating G-code" -msgstr "" - -msgid "Failed processing of the filename_format template." -msgstr "" - -msgid "Printable area" -msgstr "" - -msgid "Bed exclude area" -msgstr "" - -msgid "" -"Unprintable area in XY plane. For example, X1 Series printers use the front " -"left corner to cut filament during filament change. The area is expressed as " -"polygon by points in following format: \"XxY, XxY, ...\"" -msgstr "" - -msgid "Bed custom texture" -msgstr "" - -msgid "Bed custom model" -msgstr "" - -msgid "Elephant foot compensation" -msgstr "" - -msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" -msgstr "" - -msgid "Elephant foot compensation layers" -msgstr "" - -msgid "" -"The number of layers on which the elephant foot compensation will be active. " -"The first layer will be shrunk by the elephant foot compensation value, then " -"the next layers will be linearly shrunk less, up to the layer indicated by " -"this value." -msgstr "" - -msgid "layers" -msgstr "" - -msgid "" -"Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" -msgstr "" - -msgid "Printable height" -msgstr "" - -msgid "Maximum printable height which is limited by mechanism of printer" -msgstr "" - -msgid "Preferred orientation" -msgstr "" - -msgid "Automatically orient stls on the Z-axis upon initial import" -msgstr "" - -msgid "Printer preset names" -msgstr "" - -msgid "Hostname, IP or URL" -msgstr "" - -msgid "" -"Orca Slicer can upload G-code files to a printer host. This field should " -"contain the hostname, IP address or URL of the printer host instance. Print " -"host behind HAProxy with basic auth enabled can be accessed by putting the " -"user name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" -msgstr "" - -msgid "Device UI" -msgstr "" - -msgid "" -"Specify the URL of your device user interface if it's not same as print_host" -msgstr "" - -msgid "API Key / Password" -msgstr "" - -msgid "" -"Orca Slicer can upload G-code files to a printer host. This field should " -"contain the API Key or the password required for authentication." -msgstr "" - -msgid "Name of the printer" -msgstr "" - -msgid "HTTPS CA File" -msgstr "" - -msgid "" -"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " -"in crt/pem format. If left blank, the default OS CA certificate repository " -"is used." -msgstr "" - -msgid "User" -msgstr "" - -msgid "Password" -msgstr "" - -msgid "Ignore HTTPS certificate revocation checks" -msgstr "" - -msgid "" -"Ignore HTTPS certificate revocation checks in case of missing or offline " -"distribution points. One may want to enable this option for self signed " -"certificates if connection fails." -msgstr "" - -msgid "Names of presets related to the physical printer" -msgstr "" - -msgid "Authorization Type" -msgstr "" - -msgid "API key" -msgstr "" - -msgid "HTTP digest" -msgstr "" - -msgid "Avoid crossing wall" -msgstr "" - -msgid "Detour and avoid to travel across wall which may cause blob on surface" -msgstr "" - -msgid "Avoid crossing wall - Max detour length" -msgstr "" - -msgid "" -"Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " -"either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" -msgstr "" - -msgid "mm or %" -msgstr "" - -msgid "Other layers" -msgstr "" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" - -msgid "°C" -msgstr "" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" -msgstr "" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" -msgstr "" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" -msgstr "" - -msgid "Initial layer" -msgstr "" - -msgid "Initial layer bed temperature" -msgstr "" - -msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" -msgstr "" - -msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" -msgstr "" - -msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" -msgstr "" - -msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" -msgstr "" - -msgid "Bed types supported by the printer" -msgstr "" - -msgid "Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "" - -msgid "First layer print sequence" -msgstr "" - -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "" - -msgid "Bottom shell layers" -msgstr "" - -msgid "" -"This is the number of solid layers of bottom shell, including the bottom " -"surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" -msgstr "" - -msgid "Bottom shell thickness" -msgstr "" - -msgid "" -"The number of bottom solid layers is increased when slicing if the thickness " -"calculated by bottom shell layers is thinner than this value. This can avoid " -"having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" -msgstr "" - -msgid "Apply gap fill" -msgstr "" - -msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" -"\n" -"Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" -"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" -msgstr "" - -msgid "Everywhere" -msgstr "" - -msgid "Top and bottom surfaces" -msgstr "" - -msgid "Nowhere" -msgstr "" - -msgid "Force cooling for overhang and bridge" -msgstr "" - -msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" -msgstr "" - -msgid "Fan speed for overhang" -msgstr "" - -msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" -msgstr "" - -msgid "Cooling overhang threshold" -msgstr "" - -#, possible-c-format -msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" -msgstr "" - -msgid "Bridge infill direction" -msgstr "" - -msgid "" -"Bridging angle override. If left to zero, the bridging angle will be " -"calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." -msgstr "" - -msgid "Bridge density" -msgstr "" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" - -msgid "Bridge flow ratio" -msgstr "" - -msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" -msgstr "" - -msgid "Internal bridge flow ratio" -msgstr "" - -msgid "" -"This value governs the thickness of the internal bridge layer. This is the " -"first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." -msgstr "" - -msgid "Top surface flow ratio" -msgstr "" - -msgid "" -"This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" -msgstr "" - -msgid "Bottom surface flow ratio" -msgstr "" - -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "" - -msgid "Precise wall" -msgstr "" - -msgid "" -"Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" -msgstr "" - -msgid "Only one wall on top surfaces" -msgstr "" - -msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" -msgstr "" - -msgid "One wall threshold" -msgstr "" - -#, no-c-format, no-boost-format -msgid "" -"If a top surface has to be printed and it's partially covered by another " -"layer, it won't be considered at a top layer where its width is below this " -"value. This can be useful to not let the 'one perimeter on top' trigger on " -"surface that should be covered only by perimeters. This value can be a mm or " -"a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created if you have some thin features " -"on the next layer, like letters. Set this setting to 0 to remove these " -"artifacts." -msgstr "" - -msgid "Only one wall on first layer" -msgstr "" - -msgid "" -"Use only one wall on first layer, to give more space to the bottom infill " -"pattern" -msgstr "" - -msgid "Extra perimeters on overhangs" -msgstr "" - -msgid "" -"Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " -msgstr "" - -msgid "Reverse on odd" -msgstr "" - -msgid "Overhang reversal" -msgstr "" - -msgid "" -"Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " -"steep overhangs.\n" -"\n" -"This setting can also help reduce part warping due to the reduction of " -"stresses in the part walls." -msgstr "" - -msgid "Reverse only internal perimeters" -msgstr "" - -msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" -"\n" -"This setting greatly reduces part stresses as they are now distributed in " -"alternating directions. This should reduce part warping while also " -"maintaining external wall quality. This feature can be very useful for warp " -"prone material, like ABS/ASA, and also for elastic filaments, like TPU and " -"Silk PLA. It can also help reduce warping on floating regions over " -"supports.\n" -"\n" -"For this setting to be the most effective, it is recomended to set the " -"Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." -msgstr "" - -msgid "Bridge counterbole holes" -msgstr "" - -msgid "" -"This option creates bridges for counterbore holes, allowing them to be " -"printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." -msgstr "" - -msgid "Partially bridged" -msgstr "" - -msgid "Sacrificial layer" -msgstr "" - -msgid "Reverse threshold" -msgstr "" - -msgid "Overhang reversal threshold" -msgstr "" - -#, no-c-format, no-boost-format -msgid "" -"Number of mm the overhang need to be for the reversal to be considered " -"useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" -msgstr "" - -msgid "Slow down for overhang" -msgstr "" - -msgid "Enable this option to slow printing down for different overhang degree" -msgstr "" - -msgid "Slow down for curled perimeters" -msgstr "" - -msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" -msgstr "" - -msgid "mm/s or %" -msgstr "" - -msgid "External" -msgstr "" - -msgid "Speed of bridge and completely overhang wall" -msgstr "" - -msgid "mm/s" -msgstr "" - -msgid "Internal" -msgstr "" - -msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." -msgstr "" - -msgid "Brim width" -msgstr "" - -msgid "Distance from model to the outermost brim line" -msgstr "" - -msgid "Brim type" -msgstr "" - -msgid "" -"This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." -msgstr "" - -msgid "Brim-object gap" -msgstr "" - -msgid "" -"A gap between innermost brim line and object can make brim be removed more " -"easily" -msgstr "" - -msgid "Brim ears" -msgstr "" - -msgid "Only draw brim over the sharp edges of the model." -msgstr "" - -msgid "Brim ear max angle" -msgstr "" - -msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" -"If set to ~180, brim will be created on everything but straight sections." -msgstr "" - -msgid "Brim ear detection radius" -msgstr "" - -msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" -msgstr "" - -msgid "Compatible machine" -msgstr "" - -msgid "upward compatible machine" -msgstr "" - -msgid "Compatible machine condition" -msgstr "" - -msgid "Compatible process profiles" -msgstr "" - -msgid "Compatible process profiles condition" -msgstr "" - -msgid "Print sequence, layer by layer or object by object" -msgstr "" - -msgid "By layer" -msgstr "" - -msgid "By object" -msgstr "" - -msgid "Intra-layer order" -msgstr "" - -msgid "Print order within a single layer" -msgstr "" - -msgid "As object list" -msgstr "" - -msgid "Slow printing down for better layer cooling" -msgstr "" - -msgid "" -"Enable this option to slow printing speed down to make the final layer time " -"not shorter than the layer time threshold in \"Max fan speed threshold\", so " -"that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" -msgstr "" - -msgid "Normal printing" -msgstr "" - -msgid "" -"The default acceleration of both normal printing and travel except initial " -"layer" -msgstr "" - -msgid "mm/s²" -msgstr "" - -msgid "Default filament profile" -msgstr "" - -msgid "Default filament profile when switch to this machine profile" -msgstr "" - -msgid "Default process profile" -msgstr "" - -msgid "Default process profile when switch to this machine profile" -msgstr "" - -msgid "Activate air filtration" -msgstr "" - -msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" -msgstr "" - -msgid "Fan speed" -msgstr "" - -msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" -msgstr "" - -msgid "Speed of exhaust fan after printing completes" -msgstr "" - -msgid "No cooling for the first" -msgstr "" - -msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" -msgstr "" - -msgid "Don't support bridges" -msgstr "" - -msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" -msgstr "" - -msgid "Thick bridges" -msgstr "" - -msgid "" -"If enabled, bridges are more reliable, can bridge longer distances, but may " -"look worse. If disabled, bridges look better but are reliable just for " -"shorter bridged distances." -msgstr "" - -msgid "Thick internal bridges" -msgstr "" - -msgid "" -"If enabled, thick internal bridges will be used. It's usually recommended to " -"have this feature turned on. However, consider turning it off if you are " -"using large nozzles." -msgstr "" - -msgid "Don't filter out small internal bridges (beta)" -msgstr "" - -msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" -"\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." -msgstr "" - -msgid "Disabled" -msgstr "" - -msgid "Limited filtering" -msgstr "" - -msgid "No filtering" -msgstr "" - -msgid "Max bridge length" -msgstr "" - -msgid "" -"Max length of bridges that don't need support. Set it to 0 if you want all " -"bridges to be supported, and set it to a very large value if you don't want " -"any bridges to be supported." -msgstr "" - -msgid "End G-code" -msgstr "" - -msgid "End G-code when finish the whole printing" -msgstr "" - -msgid "Between Object Gcode" -msgstr "" - -msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" -msgstr "" - -msgid "End G-code when finish the printing of this filament" -msgstr "" - -msgid "Ensure vertical shell thickness" -msgstr "" - -msgid "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" - -msgid "Further reduce solid infill on walls (beta)" -msgstr "" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." -msgstr "" - -msgid "Top surface pattern" -msgstr "" - -msgid "Line pattern of top surface infill" -msgstr "" - -msgid "Concentric" -msgstr "" - -msgid "Rectilinear" -msgstr "" - -msgid "Monotonic" -msgstr "" - -msgid "Monotonic line" -msgstr "" - -msgid "Aligned Rectilinear" -msgstr "" - -msgid "Hilbert Curve" -msgstr "" - -msgid "Archimedean Chords" -msgstr "" - -msgid "Octagram Spiral" -msgstr "" - -msgid "Bottom surface pattern" -msgstr "" - -msgid "Line pattern of bottom surface infill, not bridge infill" -msgstr "" - -msgid "Internal solid infill pattern" -msgstr "" - -msgid "" -"Line pattern of internal solid infill. if the detect narrow internal solid " -"infill be enabled, the concentric pattern will be used for the small area." -msgstr "" - -msgid "" -"Line width of outer wall. If expressed as a %, it will be computed over the " -"nozzle diameter." -msgstr "" - -msgid "" -"Speed of outer wall which is outermost and visible. It's used to be slower " -"than inner wall speed to get better quality." -msgstr "" - -msgid "Small perimeters" -msgstr "" - -msgid "" -"This separate setting will affect the speed of perimeters having radius <= " -"small_perimeter_threshold (usually holes). If expressed as percentage (for " -"example: 80%) it will be calculated on the outer wall speed setting above. " -"Set to zero for auto." -msgstr "" - -msgid "Small perimeters threshold" -msgstr "" - -msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" -msgstr "" - -msgid "Walls printing order" -msgstr "" - -msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" -"\n" -"Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " -"results in slightly reduced surface quality as the external perimeter is " -"deformed by being squashed to the internal perimeter.\n" -"\n" -"Use Inner/Outer/Inner for the best external surface finish and dimensional " -"accuracy as the external wall is printed undisturbed from an internal " -"perimeter. However, overhang performance will reduce as there is no internal " -"perimeter to print the external wall against. This option requires a minimum " -"of 3 walls to be effective as it prints the internal walls from the 3rd " -"perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" -"\n" -"Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " -"consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " -msgstr "" - -msgid "Inner/Outer" -msgstr "" - -msgid "Outer/Inner" -msgstr "" - -msgid "Inner/Outer/Inner" -msgstr "" - -msgid "Print infill first" -msgstr "" - -msgid "" -"Order of wall/infill. When the tickbox is unchecked the walls are printed " -"first, which works best in most cases.\n" -"\n" -"Printing walls first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " -"the printed walls where it is attached to them, resulting in a worse " -"external surface finish. It can also cause the infill to shine through the " -"external surfaces of the part." -msgstr "" - -msgid "Wall loop direction" -msgstr "" - -msgid "" -"The direction which the wall loops are extruded when looking down from the " -"top.\n" -"\n" -"By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" -"\n" -"This option will be disabled if sprial vase mode is enabled." -msgstr "" - -msgid "Counter clockwise" -msgstr "" - -msgid "Clockwise" -msgstr "" - -msgid "Height to rod" -msgstr "" - -msgid "" -"Distance of the nozzle tip to the lower rod. Used for collision avoidance in " -"by-object printing." -msgstr "" - -msgid "Height to lid" -msgstr "" - -msgid "" -"Distance of the nozzle tip to the lid. Used for collision avoidance in by-" -"object printing." -msgstr "" - -msgid "" -"Clearance radius around extruder. Used for collision avoidance in by-object " -"printing." -msgstr "" - -msgid "Bed mesh min" -msgstr "" - -msgid "" -"This option sets the min point for the allowed bed mesh area. Due to the " -"probe's XY offset, most printers are unable to probe the entire bed. To " -"ensure the probe point does not go outside the bed area, the minimum and " -"maximum points of the bed mesh should be set appropriately. OrcaSlicer " -"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " -"exceed these min/max points. This information can usually be obtained from " -"your printer manufacturer. The default setting is (-99999, -99999), which " -"means there are no limits, thus allowing probing across the entire bed." -msgstr "" - -msgid "Bed mesh max" -msgstr "" - -msgid "" -"This option sets the max point for the allowed bed mesh area. Due to the " -"probe's XY offset, most printers are unable to probe the entire bed. To " -"ensure the probe point does not go outside the bed area, the minimum and " -"maximum points of the bed mesh should be set appropriately. OrcaSlicer " -"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " -"exceed these min/max points. This information can usually be obtained from " -"your printer manufacturer. The default setting is (99999, 99999), which " -"means there are no limits, thus allowing probing across the entire bed." -msgstr "" - -msgid "Probe point distance" -msgstr "" - -msgid "" -"This option sets the preferred distance between probe points (grid size) for " -"the X and Y directions, with the default being 50mm for both X and Y." -msgstr "" - -msgid "Mesh margin" -msgstr "" - -msgid "" -"This option determines the additional distance by which the adaptive bed " -"mesh area should be expanded in the XY directions." -msgstr "" - -msgid "Extruder Color" -msgstr "" - -msgid "Only used as a visual help on UI" -msgstr "" - -msgid "Extruder offset" -msgstr "" - -msgid "Flow ratio" -msgstr "" - -msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" -msgstr "" - -msgid "Enable pressure advance" -msgstr "" - -msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " -"enabled." -msgstr "" - -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" -msgstr "" - -msgid "" -"Default line width if other line widths are set to 0. If expressed as a %, " -"it will be computed over the nozzle diameter." -msgstr "" - -msgid "Keep fan always on" -msgstr "" - -msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" -msgstr "" - -msgid "Layer time" -msgstr "" - -msgid "" -"Part cooling fan will be enabled for layers of which estimated time is " -"shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" -msgstr "" - -msgid "Default color" -msgstr "" - -msgid "Default filament color" -msgstr "" - -msgid "Filament notes" -msgstr "" - -msgid "You can put your notes regarding the filament here." -msgstr "" - -msgid "Required nozzle HRC" -msgstr "" - -msgid "" -"Minimum HRC of nozzle required to print the filament. Zero means no checking " -"of nozzle's HRC." -msgstr "" - -msgid "" -"This setting stands for how much volume of filament can be melted and " -"extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" -msgstr "" - -msgid "mm³/s" -msgstr "" - -msgid "Filament load time" -msgstr "" - -msgid "Time to load new filament when switch filament. For statistics only" -msgstr "" - -msgid "Filament unload time" -msgstr "" - -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "" - -msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" -msgstr "" - -msgid "Shrinkage" -msgstr "" - -#, no-c-format, no-boost-format -msgid "" -"Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " -"compensate. Only the filament used for the perimeter is taken into account.\n" -"Be sure to allow enough space between objects, as this compensation is done " -"after the checks." -msgstr "" - -msgid "Loading speed" -msgstr "" - -msgid "Speed used for loading the filament on the wipe tower." -msgstr "" - -msgid "Loading speed at the start" -msgstr "" - -msgid "Speed used at the very beginning of loading phase." -msgstr "" - -msgid "Unloading speed" -msgstr "" - -msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming)." -msgstr "" - -msgid "Unloading speed at the start" -msgstr "" - -msgid "" -"Speed used for unloading the tip of the filament immediately after ramming." -msgstr "" - -msgid "Delay after unloading" -msgstr "" - -msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions." -msgstr "" - -msgid "Number of cooling moves" -msgstr "" - -msgid "" -"Filament is cooled by being moved back and forth in the cooling tubes. " -"Specify desired number of these moves." -msgstr "" - -msgid "Speed of the first cooling move" -msgstr "" - -msgid "Cooling moves are gradually accelerating beginning at this speed." -msgstr "" - -msgid "Minimal purge on wipe tower" -msgstr "" - -msgid "" -"After a tool change, the exact position of the newly loaded filament inside " -"the nozzle may not be known, and the filament pressure is likely not yet " -"stable. Before purging the print head into an infill or a sacrificial " -"object, Orca Slicer will always prime this amount of material into the wipe " -"tower to produce successive infill or sacrificial object extrusions reliably." -msgstr "" - -msgid "Speed of the last cooling move" -msgstr "" - -msgid "Cooling moves are gradually accelerating towards this speed." -msgstr "" - -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - -msgid "Ramming parameters" -msgstr "" - -msgid "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters." -msgstr "" - -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - -msgid "Enable ramming for multitool setups" -msgstr "" - -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." -msgstr "" - -msgid "Multitool ramming volume" -msgstr "" - -msgid "The volume to be rammed before the toolchange." -msgstr "" - -msgid "Multitool ramming flow" -msgstr "" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "" - -msgid "Density" -msgstr "" - -msgid "Filament density. For statistics only" -msgstr "" - -msgid "g/cm³" -msgstr "" - -msgid "The material type of filament" -msgstr "" - -msgid "Soluble material" -msgstr "" - -msgid "" -"Soluble material is commonly used to print support and support interface" -msgstr "" - -msgid "Support material" -msgstr "" - -msgid "" -"Support material is commonly used to print support and support interface" -msgstr "" - -msgid "Softening temperature" -msgstr "" - -msgid "" -"The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" - -msgid "Price" -msgstr "" - -msgid "Filament price. For statistics only" -msgstr "" - -msgid "money/kg" -msgstr "" - -msgid "Vendor" -msgstr "" - -msgid "Vendor of filament. For show only" -msgstr "" - -msgid "(Undefined)" -msgstr "" - -msgid "Infill direction" -msgstr "" - -msgid "" -"Angle for sparse infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Sparse infill density" -msgstr "" - -#, no-c-format, no-boost-format -msgid "" -"Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" -msgstr "" - -msgid "Sparse infill pattern" -msgstr "" - -msgid "Line pattern for internal sparse infill" -msgstr "" - -msgid "Grid" -msgstr "" - -msgid "Line" -msgstr "" - -msgid "Cubic" -msgstr "" - -msgid "Tri-hexagon" -msgstr "" - -msgid "Gyroid" -msgstr "" - -msgid "Honeycomb" -msgstr "" - -msgid "Adaptive Cubic" -msgstr "" - -msgid "3D Honeycomb" -msgstr "" - -msgid "Support Cubic" -msgstr "" - -msgid "Lightning" -msgstr "" - -msgid "Sparse infill anchor length" -msgstr "" - -msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Orca Slicer tries to connect two " -"close infill lines to a short perimeter segment. If no such perimeter " -"segment shorter than infill_anchor_max is found, the infill line is " -"connected to a perimeter segment at just one side and the length of the " -"perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" -"Set this parameter to zero to disable anchoring perimeters connected to a " -"single infill line." -msgstr "" - -msgid "0 (no open anchors)" -msgstr "" - -msgid "1000 (unlimited)" -msgstr "" - -msgid "Maximum length of the infill anchor" -msgstr "" - -msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Orca Slicer tries to connect two " -"close infill lines to a short perimeter segment. If no such perimeter " -"segment shorter than this parameter is found, the infill line is connected " -"to a perimeter segment at just one side and the length of the perimeter " -"segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" -"If set to 0, the old algorithm for infill connection will be used, it should " -"create the same result as with 1000 & 0." -msgstr "" - -msgid "0 (Simple connect)" -msgstr "" - -msgid "Acceleration of outer walls" -msgstr "" - -msgid "Acceleration of inner walls" -msgstr "" - -msgid "Acceleration of travel moves" -msgstr "" - -msgid "" -"Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" -msgstr "" - -msgid "Acceleration of outer wall. Using a lower value can improve quality" -msgstr "" - -msgid "" -"Acceleration of bridges. If the value is expressed as a percentage (e.g. " -"50%), it will be calculated based on the outer wall acceleration." -msgstr "" - -msgid "mm/s² or %" -msgstr "" - -msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." -msgstr "" - -msgid "" -"Acceleration of internal solid infill. If the value is expressed as a " -"percentage (e.g. 100%), it will be calculated based on the default " -"acceleration." -msgstr "" - -msgid "" -"Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" -msgstr "" - -msgid "Enable accel_to_decel" -msgstr "" - -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "" - -msgid "accel_to_decel" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" -msgstr "" - -msgid "Jerk of outer walls" -msgstr "" - -msgid "Jerk of inner walls" -msgstr "" - -msgid "Jerk for top surface" -msgstr "" - -msgid "Jerk for infill" -msgstr "" - -msgid "Jerk for initial layer" -msgstr "" - -msgid "Jerk for travel" -msgstr "" - -msgid "" -"Line width of initial layer. If expressed as a %, it will be computed over " -"the nozzle diameter." -msgstr "" - -msgid "Initial layer height" -msgstr "" - -msgid "" -"Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhension" -msgstr "" - -msgid "Speed of initial layer except the solid infill part" -msgstr "" - -msgid "Initial layer infill" -msgstr "" - -msgid "Speed of solid infill part of initial layer" -msgstr "" - -msgid "Initial layer travel speed" -msgstr "" - -msgid "Travel speed of initial layer" -msgstr "" - -msgid "Number of slow layers" -msgstr "" - -msgid "" -"The first few layers are printed slower than normal. The speed is gradually " -"increased in a linear fashion over the specified number of layers." -msgstr "" - -msgid "Initial layer nozzle temperature" -msgstr "" - -msgid "Nozzle temperature to print initial layer when using this filament" -msgstr "" - -msgid "Full fan speed at layer" -msgstr "" - -msgid "" -"Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." -msgstr "" - -msgid "Support interface fan speed" -msgstr "" - -msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - -msgid "" -"Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" -msgstr "" - -msgid "Contour" -msgstr "" - -msgid "Contour and hole" -msgstr "" - -msgid "All walls" -msgstr "" - -msgid "Fuzzy skin thickness" -msgstr "" - -msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" -msgstr "" - -msgid "Fuzzy skin point distance" -msgstr "" - -msgid "" -"The average diatance between the random points introducded on each line " -"segment" -msgstr "" - -msgid "Apply fuzzy skin to first layer" -msgstr "" - -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "" - -msgid "Filter out tiny gaps" -msgstr "" - -msgid "Layers and Perimeters" -msgstr "" - -msgid "Filter out gaps smaller than the threshold specified" -msgstr "" - -msgid "" -"Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" -msgstr "" - -msgid "Arc fitting" -msgstr "" - -msgid "" -"Enable this to get a G-code file which has G2 and G3 moves. And the fitting " -"tolerance is same with resolution" -msgstr "" - -msgid "Add line number" -msgstr "" - -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" -msgstr "" - -msgid "Scan first layer" -msgstr "" - -msgid "" -"Enable this to enable the camera on printer to check the quality of first " -"layer" -msgstr "" - -msgid "Nozzle type" -msgstr "" - -msgid "" -"The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" -msgstr "" - -msgid "Undefine" -msgstr "" - -msgid "Hardened steel" -msgstr "" - -msgid "Stainless steel" -msgstr "" - -msgid "Brass" -msgstr "" - -msgid "Nozzle HRC" -msgstr "" - -msgid "" -"The nozzle's hardness. Zero means no checking for nozzle's hardness during " -"slicing." -msgstr "" - -msgid "HRC" -msgstr "" - -msgid "Printer structure" -msgstr "" - -msgid "The physical arrangement and components of a printing device" -msgstr "" - -msgid "CoreXY" -msgstr "" - -msgid "I3" -msgstr "" - -msgid "Hbot" -msgstr "" - -msgid "Delta" -msgstr "" - -msgid "Best object position" -msgstr "" - -msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "" - -msgid "" -"Enable this option if machine has auxiliary part cooling fan. G-code " -"command: M106 P2 S(0-255)." -msgstr "" - -msgid "" -"Start the fan this number of seconds earlier than its target start time (you " -"can use fractional seconds). It assumes infinite acceleration for this time " -"estimation, and will only take into account G1 and G0 moves (arc fitting is " -"unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " -"'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" -"Use 0 to deactivate." -msgstr "" - -msgid "Only overhangs" -msgstr "" - -msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "" - -msgid "Fan kick-start time" -msgstr "" - -msgid "" -"Emit a max fan speed command for this amount of seconds before reducing to " -"target speed to kick-start the cooling fan.\n" -"This is useful for fans where a low PWM/power may be insufficient to get the " -"fan started spinning from a stop, or to get the fan up to speed faster.\n" -"Set to 0 to deactivate." -msgstr "" - -msgid "Time cost" -msgstr "" - -msgid "The printer cost per hour" -msgstr "" - -msgid "money/h" -msgstr "" - -msgid "Support control chamber temperature" -msgstr "" - -msgid "" -"This option is enabled if machine support controlling chamber temperature\n" -"G-code command: M141 S(0-255)" -msgstr "" - -msgid "Support air filtration" -msgstr "" - -msgid "" -"Enable this if printer support air filtration\n" -"G-code command: M106 P3 S(0-255)" -msgstr "" - -msgid "G-code flavor" -msgstr "" - -msgid "What kind of gcode the printer is compatible with" -msgstr "" - -msgid "Klipper" -msgstr "" - -msgid "Support multi bed types" -msgstr "" - -msgid "Enable this option if you want to use multiple bed types" -msgstr "" - -msgid "Label objects" -msgstr "" - -msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " -"object they belong to, which is useful for the Octoprint CancelObject " -"plugin. This settings is NOT compatible with Single Extruder Multi Material " -"setup and Wipe into Object / Wipe into Infill." -msgstr "" - -msgid "Exclude objects" -msgstr "" - -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "" - -msgid "Verbose G-code" -msgstr "" - -msgid "" -"Enable this to get a commented G-code file, with each line explained by a " -"descriptive text. If you print from SD card, the additional weight of the " -"file could make your firmware slow down." -msgstr "" - -msgid "Infill combination" -msgstr "" - -msgid "" -"Automatically Combine sparse infill of several layers to print together to " -"reduce time. Wall is still printed with original layer height." -msgstr "" - -msgid "Filament to print internal sparse infill." -msgstr "" - -msgid "" -"Line width of internal sparse infill. If expressed as a %, it will be " -"computed over the nozzle diameter." -msgstr "" - -msgid "Infill/Wall overlap" -msgstr "" - -msgid "" -"Infill area is enlarged slightly to overlap with wall for better bonding. " -"The percentage value is relative to line width of sparse infill" -msgstr "" - -msgid "Speed of internal sparse infill" -msgstr "" - -msgid "Interface shells" -msgstr "" - -msgid "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" -msgstr "" - -msgid "Maximum width of a segmented region" -msgstr "" - -msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "" - -msgid "Interlocking depth of a segmented region" -msgstr "" - -msgid "Interlocking depth of a segmented region. Zero disables this feature." -msgstr "" - -msgid "Ironing Type" -msgstr "" - -msgid "" -"Ironing is using small flow to print on same height of surface again to make " -"flat surface more smooth. This setting controls which layer being ironed" -msgstr "" - -msgid "No ironing" -msgstr "" - -msgid "Top surfaces" -msgstr "" - -msgid "Topmost surface" -msgstr "" - -msgid "All solid layer" -msgstr "" - -msgid "Ironing Pattern" -msgstr "" - -msgid "The pattern that will be used when ironing" -msgstr "" - -msgid "Ironing flow" -msgstr "" - -msgid "" -"The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" -msgstr "" - -msgid "Ironing line spacing" -msgstr "" - -msgid "The distance between the lines of ironing" -msgstr "" - -msgid "Ironing speed" -msgstr "" - -msgid "Print speed of ironing lines" -msgstr "" - -msgid "Ironing angle" -msgstr "" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." -msgstr "" - -msgid "This gcode part is inserted at every layer change after lift z" -msgstr "" - -msgid "Supports silent mode" -msgstr "" - -msgid "" -"Whether the machine supports silent mode in which machine use lower " -"acceleration to print" -msgstr "" - -msgid "Emit limits to G-code" -msgstr "" - -msgid "Machine limits" -msgstr "" - -msgid "" -"If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." -msgstr "" - -msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" -msgstr "" - -msgid "This G-code will be used as a custom code" -msgstr "" - -msgid "Small area flow compensation (beta)" -msgstr "" - -msgid "Enable flow compensation for small infill areas" -msgstr "" - -msgid "Flow Compensation Model" -msgstr "" - -msgid "" -"Flow Compensation Model, used to adjust the flow for small infill areas. The " -"model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" -msgstr "" - -msgid "Maximum speed X" -msgstr "" - -msgid "Maximum speed Y" -msgstr "" - -msgid "Maximum speed Z" -msgstr "" - -msgid "Maximum speed E" -msgstr "" - -msgid "Maximum X speed" -msgstr "" - -msgid "Maximum Y speed" -msgstr "" - -msgid "Maximum Z speed" -msgstr "" - -msgid "Maximum E speed" -msgstr "" - -msgid "Maximum acceleration X" -msgstr "" - -msgid "Maximum acceleration Y" -msgstr "" - -msgid "Maximum acceleration Z" -msgstr "" - -msgid "Maximum acceleration E" -msgstr "" - -msgid "Maximum acceleration of the X axis" -msgstr "" - -msgid "Maximum acceleration of the Y axis" -msgstr "" - -msgid "Maximum acceleration of the Z axis" -msgstr "" - -msgid "Maximum acceleration of the E axis" -msgstr "" - -msgid "Maximum jerk X" -msgstr "" - -msgid "Maximum jerk Y" -msgstr "" - -msgid "Maximum jerk Z" -msgstr "" - -msgid "Maximum jerk E" -msgstr "" - -msgid "Maximum jerk of the X axis" -msgstr "" - -msgid "Maximum jerk of the Y axis" -msgstr "" - -msgid "Maximum jerk of the Z axis" -msgstr "" - -msgid "Maximum jerk of the E axis" -msgstr "" - -msgid "Minimum speed for extruding" -msgstr "" - -msgid "Minimum speed for extruding (M205 S)" -msgstr "" - -msgid "Minimum travel speed" -msgstr "" - -msgid "Minimum travel speed (M205 T)" -msgstr "" - -msgid "Maximum acceleration for extruding" -msgstr "" - -msgid "Maximum acceleration for extruding (M204 P)" -msgstr "" - -msgid "Maximum acceleration for retracting" -msgstr "" - -msgid "Maximum acceleration for retracting (M204 R)" -msgstr "" - -msgid "Maximum acceleration for travel" -msgstr "" - -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" -msgstr "" - -msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" -msgstr "" - -msgid "Max" -msgstr "" - -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" -msgstr "" - -msgid "Extrusion rate smoothing" -msgstr "" - -msgid "" -"This parameter smooths out sudden extrusion rate changes that happen when " -"the printer transitions from printing a high flow (high speed/larger width) " -"extrusion to a lower flow (lower speed/smaller width) extrusion and vice " -"versa.\n" -"\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " -"can change over time. Higher values mean higher extrusion rate changes are " -"allowed, resulting in faster speed transitions.\n" -"\n" -"A value of 0 disables the feature. \n" -"\n" -"For a high speed, high flow direct drive printer (like the Bambu lab or " -"Voron) this value is usually not needed. However it can provide some " -"marginal benefit in certain cases where feature speeds vary greatly. For " -"example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " -"transition.\n" -"\n" -"For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" -"\n" -"This feature is known as Pressure Equalizer in Prusa slicer.\n" -"\n" -"Note: this parameter disables arc fitting." -msgstr "" - -msgid "mm³/s²" -msgstr "" - -msgid "Smoothing segment length" -msgstr "" - -msgid "" -"A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" -"\n" -"Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" -"\n" -"Allowed values: 1-5" -msgstr "" - -msgid "Minimum speed for part cooling fan" -msgstr "" - -msgid "" -"Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -"during printing except the first several layers which is defined by no " -"cooling layers.\n" -"Please enable auxiliary_fan in printer settings to use this feature. G-code " -"command: M106 P2 S(0-255)" -msgstr "" - -msgid "Min" -msgstr "" - -msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" -msgstr "" - -msgid "Min print speed" -msgstr "" - -msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." -msgstr "" - -msgid "Nozzle diameter" -msgstr "" - -msgid "Diameter of nozzle" -msgstr "" - -msgid "Configuration notes" -msgstr "" - -msgid "" -"You can put here your personal notes. This text will be added to the G-code " -"header comments." -msgstr "" - -msgid "Host Type" -msgstr "" - -msgid "" -"Orca Slicer can upload G-code files to a printer host. This field must " -"contain the kind of the host." -msgstr "" - -msgid "Nozzle volume" -msgstr "" - -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "" - -msgid "Cooling tube position" -msgstr "" - -msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "" - -msgid "Cooling tube length" -msgstr "" - -msgid "Length of the cooling tube to limit space for cooling moves inside it." -msgstr "" - -msgid "High extruder current on filament swap" -msgstr "" - -msgid "" -"It may be beneficial to increase the extruder motor current during the " -"filament exchange sequence to allow for rapid ramming feed rates and to " -"overcome resistance when loading a filament with an ugly shaped tip." -msgstr "" - -msgid "Filament parking position" -msgstr "" - -msgid "" -"Distance of the extruder tip from the position where the filament is parked " -"when unloaded. This should match the value in printer firmware." -msgstr "" - -msgid "Extra loading distance" -msgstr "" - -msgid "" -"When set to zero, the distance the filament is moved from parking position " -"during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " -"than unloading." -msgstr "" - -msgid "Start end points" -msgstr "" - -msgid "The start and end points which is from cutter area to garbage can." -msgstr "" - -msgid "Reduce infill retraction" -msgstr "" - -msgid "" -"Don't retract when the travel is in infill area absolutely. That means the " -"oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" -msgstr "" - -msgid "Filename format" -msgstr "" - -msgid "User can self-define the project file name when export" -msgstr "" - -msgid "Make overhangs printable" -msgstr "" - -msgid "Modify the geometry to print overhangs without support material." -msgstr "" - -msgid "Make overhangs printable - Maximum angle" -msgstr "" - -msgid "" -"Maximum angle of overhangs to allow after making more steep overhangs " -"printable.90° will not change the model at all and allow any overhang, while " -"0 will replace all overhangs with conical material." -msgstr "" - -msgid "Make overhangs printable - Hole area" -msgstr "" - -msgid "" -"Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." -msgstr "" - -msgid "mm²" -msgstr "" - -msgid "Detect overhang wall" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Detect the overhang percentage relative to line width and use different " -"speed to print. For 100%% overhang, bridge speed is used." -msgstr "" - -msgid "" -"Line width of inner wall. If expressed as a %, it will be computed over the " -"nozzle diameter." -msgstr "" - -msgid "Speed of inner wall" -msgstr "" - -msgid "Number of walls of every layer" -msgstr "" - -msgid "Alternate extra wall" -msgstr "" - -msgid "" -"This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" -"\n" -"When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" -"\n" -"Using lightning infill together with this option is not recommended as there " -"is limited infill to anchor the extra perimeters to." -msgstr "" - -msgid "" -"If you want to process the output G-code through custom scripts, just list " -"their absolute paths here. Separate multiple scripts with a semicolon. " -"Scripts will be passed the absolute path to the G-code file as the first " -"argument, and they can access the Orca Slicer config settings by reading " -"environment variables." -msgstr "" - -msgid "Printer notes" -msgstr "" - -msgid "You can put your notes regarding the printer here." -msgstr "" - -msgid "Raft contact Z distance" -msgstr "" - -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "" - -msgid "Raft expansion" -msgstr "" - -msgid "Expand all raft layers in XY plane" -msgstr "" - -msgid "Initial layer density" -msgstr "" - -msgid "Density of the first raft or support layer" -msgstr "" - -msgid "Initial layer expansion" -msgstr "" - -msgid "Expand the first raft or support layer to improve bed plate adhesion" -msgstr "" - -msgid "Raft layers" -msgstr "" - -msgid "" -"Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" -msgstr "" - -msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" -msgstr "" - -msgid "Travel distance threshold" -msgstr "" - -msgid "" -"Only trigger retraction when the travel distance is longer than this " -"threshold" -msgstr "" - -msgid "Retract amount before wipe" -msgstr "" - -msgid "" -"The length of fast retraction before wipe, relative to retraction length" -msgstr "" - -msgid "Retract when change layer" -msgstr "" - -msgid "Force a retraction when changes layer" -msgstr "" - -msgid "Retraction Length" -msgstr "" - -msgid "" -"Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" -msgstr "" - -msgid "Z hop when retract" -msgstr "" - -msgid "" -"Whenever the retraction is done, the nozzle is lifted a little to create " -"clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" -msgstr "" - -msgid "Z hop lower boundary" -msgstr "" - -msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" -msgstr "" - -msgid "Z hop upper boundary" -msgstr "" - -msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" -msgstr "" - -msgid "Z hop type" -msgstr "" - -msgid "Slope" -msgstr "" - -msgid "Spiral" -msgstr "" - -msgid "Only lift Z above" -msgstr "" - -msgid "" -"If you set this to a positive value, Z lift will only take place above the " -"specified absolute Z." -msgstr "" - -msgid "Only lift Z below" -msgstr "" - -msgid "" -"If you set this to a positive value, Z lift will only take place below the " -"specified absolute Z." -msgstr "" - -msgid "On surfaces" -msgstr "" - -msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " -"lift Z above/below)." -msgstr "" - -msgid "All Surfaces" -msgstr "" - -msgid "Top Only" -msgstr "" - -msgid "Bottom Only" -msgstr "" - -msgid "Top and Bottom" -msgstr "" - -msgid "Extra length on restart" -msgstr "" - -msgid "" -"When the retraction is compensated after the travel move, the extruder will " -"push this additional amount of filament. This setting is rarely needed." -msgstr "" - -msgid "" -"When the retraction is compensated after changing tool, the extruder will " -"push this additional amount of filament." -msgstr "" - -msgid "Retraction Speed" -msgstr "" - -msgid "Speed of retractions" -msgstr "" - -msgid "Deretraction Speed" -msgstr "" - -msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" -msgstr "" - -msgid "Use firmware retraction" -msgstr "" - -msgid "" -"This experimental setting uses G10 and G11 commands to have the firmware " -"handle the retraction. This is only supported in recent Marlin." -msgstr "" - -msgid "Show auto-calibration marks" -msgstr "" - -msgid "Disable set remaining print time" -msgstr "" - -msgid "Seam position" -msgstr "" - -msgid "The start position to print each part of outer wall" -msgstr "" - -msgid "Nearest" -msgstr "" - -msgid "Aligned" -msgstr "" - -msgid "Back" -msgstr "" - -msgid "Random" -msgstr "" - -msgid "Staggered inner seams" -msgstr "" - -msgid "" -"This option causes the inner seams to be shifted backwards based on their " -"depth, forming a zigzag pattern." -msgstr "" - -msgid "Seam gap" -msgstr "" - -msgid "" -"In order to reduce the visibility of the seam in a closed loop extrusion, " -"the loop is interrupted and shortened by a specified amount.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current extruder diameter. The default value for this parameter is 10%." -msgstr "" - -msgid "Scarf joint seam (beta)" -msgstr "" - -msgid "Use scarf joint to minimize seam visibility and increase seam strength." -msgstr "" - -msgid "Scarf start height" -msgstr "" - -msgid "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." -msgstr "" - -msgid "Scarf around entire wall" -msgstr "" - -msgid "The scarf extends to the entire length of the wall." -msgstr "" - -msgid "Scarf length" -msgstr "" - -msgid "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." -msgstr "" - -msgid "Scarf steps" -msgstr "" - -msgid "Minimum number of segments of each scarf." -msgstr "" - -msgid "Scarf joint for inner walls" -msgstr "" - -msgid "Use scarf joint for inner walls as well." -msgstr "" - -msgid "Role base wipe speed" -msgstr "" - -msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." -msgstr "" - -msgid "Wipe on loops" -msgstr "" - -msgid "" -"To minimize the visibility of the seam in a closed loop extrusion, a small " -"inward movement is executed before the extruder leaves the loop." -msgstr "" - -msgid "Wipe before external loop" -msgstr "" - -msgid "" -"To minimise visibility of potential overextrusion at the start of an " -"external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " -"start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" -"\n" -"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." -msgstr "" - -msgid "Wipe speed" -msgstr "" - -msgid "" -"The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" -msgstr "" - -msgid "Skirt distance" -msgstr "" - -msgid "Distance from skirt to brim or object" -msgstr "" - -msgid "Skirt height" -msgstr "" - -msgid "How many layers of skirt. Usually only one layer" -msgstr "" - -msgid "Skirt loops" -msgstr "" - -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "" - -msgid "Skirt speed" -msgstr "" - -msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." -msgstr "" - -msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" -msgstr "" - -msgid "Minimum sparse infill threshold" -msgstr "" - -msgid "" -"Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" -msgstr "" - -msgid "" -"Line width of internal solid infill. If expressed as a %, it will be " -"computed over the nozzle diameter." -msgstr "" - -msgid "Speed of internal solid infill, not the top and bottom surface" -msgstr "" - -msgid "Spiral vase" -msgstr "" - -msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " -"model into a single walled print with solid bottom layers. The final " -"generated model has no seam" -msgstr "" - -msgid "Smooth Spiral" -msgstr "" - -msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" -msgstr "" - -msgid "Max XY Smoothing" -msgstr "" - -msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" -msgstr "" - -msgid "" -"If smooth or traditional mode is selected, a timelapse video will be " -"generated for each print. After each layer is printed, a snapshot is taken " -"with the chamber camera. All of these snapshots are composed into a " -"timelapse video when printing completes. If smooth mode is selected, the " -"toolhead will move to the excess chute after each layer is printed and then " -"take a snapshot. Since the melt filament may leak from the nozzle during the " -"process of taking a snapshot, prime tower is required for smooth mode to " -"wipe nozzle." -msgstr "" - -msgid "Traditional" -msgstr "" - -msgid "Temperature variation" -msgstr "" - -msgid "Start G-code" -msgstr "" - -msgid "Start G-code when start the whole printing" -msgstr "" - -msgid "Start G-code when start the printing of this filament" -msgstr "" - -msgid "Single Extruder Multi Material" -msgstr "" - -msgid "Use single nozzle to print multi filament" -msgstr "" - -msgid "Manual Filament Change" -msgstr "" - -msgid "" -"Enable this option to omit the custom Change filament G-code only at the " -"beginning of the print. The tool change command (e.g., T0) will be skipped " -"throughout the entire print. This is useful for manual multi-material " -"printing, where we use M600/PAUSE to trigger the manual filament change " -"action." -msgstr "" - -msgid "Purge in prime tower" -msgstr "" - -msgid "Purge remaining filament into prime tower" -msgstr "" - -msgid "Enable filament ramming" -msgstr "" - -msgid "No sparse layers (beta)" -msgstr "" - -msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " -"print the wipe tower. User is responsible for ensuring there is no collision " -"with the print." -msgstr "" - -msgid "Prime all printing extruders" -msgstr "" - -msgid "" -"If enabled, all printing extruders will be primed at the front edge of the " -"print bed at the start of the print." -msgstr "" - -msgid "Slice gap closing radius" -msgstr "" - -msgid "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." -msgstr "" - -msgid "Slicing Mode" -msgstr "" - -msgid "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " -"close all holes in the model." -msgstr "" - -msgid "Regular" -msgstr "" - -msgid "Even-odd" -msgstr "" - -msgid "Close holes" -msgstr "" - -msgid "Z offset" -msgstr "" - -msgid "" -"This value will be added (or subtracted) from all the Z coordinates in the " -"output G-code. It is used to compensate for bad Z endstop position: for " -"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " -"print bed, set this to -0.3 (or fix your endstop)." -msgstr "" - -msgid "Enable support" -msgstr "" - -msgid "Enable support generation." -msgstr "" - -msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" -msgstr "" - -msgid "normal(auto)" -msgstr "" - -msgid "tree(auto)" -msgstr "" - -msgid "normal(manual)" -msgstr "" - -msgid "tree(manual)" -msgstr "" - -msgid "Support/object xy distance" -msgstr "" - -msgid "XY separation between an object and its support" -msgstr "" - -msgid "Pattern angle" -msgstr "" - -msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "" - -msgid "On build plate only" -msgstr "" - -msgid "Don't create support on model surface, only on build plate" -msgstr "" - -msgid "Support critical regions only" -msgstr "" - -msgid "" -"Only create support for critical regions including sharp tail, cantilever, " -"etc." -msgstr "" - -msgid "Remove small overhangs" -msgstr "" - -msgid "Remove small overhangs that possibly need no supports." -msgstr "" - -msgid "Top Z distance" -msgstr "" - -msgid "The z gap between the top support interface and object" -msgstr "" - -msgid "Bottom Z distance" -msgstr "" - -msgid "The z gap between the bottom support interface and object" -msgstr "" - -msgid "Support/raft base" -msgstr "" - -msgid "" -"Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" -msgstr "" - -msgid "Avoid interface filament for base" -msgstr "" - -msgid "" -"Avoid using support interface filament to print support base if possible." -msgstr "" - -msgid "" -"Line width of support. If expressed as a %, it will be computed over the " -"nozzle diameter." -msgstr "" - -msgid "Interface use loop pattern" -msgstr "" - -msgid "" -"Cover the top contact layer of the supports with loops. Disabled by default." -msgstr "" - -msgid "Support/raft interface" -msgstr "" - -msgid "" -"Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" -msgstr "" - -msgid "Top interface layers" -msgstr "" - -msgid "Number of top interface layers" -msgstr "" - -msgid "Bottom interface layers" -msgstr "" - -msgid "Number of bottom interface layers" -msgstr "" - -msgid "Same as top" -msgstr "" - -msgid "Top interface spacing" -msgstr "" - -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "" - -msgid "Bottom interface spacing" -msgstr "" - -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "" - -msgid "Speed of support interface" -msgstr "" - -msgid "Base pattern" -msgstr "" - -msgid "Line pattern of support" -msgstr "" - -msgid "Rectilinear grid" -msgstr "" - -msgid "Hollow" -msgstr "" - -msgid "Interface pattern" -msgstr "" - -msgid "" -"Line pattern of support interface. Default pattern for non-soluble support " -"interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" -msgstr "" - -msgid "Rectilinear Interlaced" -msgstr "" - -msgid "Base pattern spacing" -msgstr "" - -msgid "Spacing between support lines" -msgstr "" - -msgid "Normal Support expansion" -msgstr "" - -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "" - -msgid "Speed of support" -msgstr "" - -msgid "" -"Style and shape of the support. For normal support, projecting the supports " -"into a regular grid will create more stable supports (default), while snug " -"support towers will save material and reduce object scarring.\n" -"For tree support, slim and organic style will merge branches more " -"aggressively and save a lot of material (default organic), while hybrid " -"style will create similar structure to normal support under large flat " -"overhangs." -msgstr "" - -msgid "Snug" -msgstr "" - -msgid "Tree Slim" -msgstr "" - -msgid "Tree Strong" -msgstr "" - -msgid "Tree Hybrid" -msgstr "" - -msgid "Organic" -msgstr "" - -msgid "Independent support layer height" -msgstr "" - -msgid "" -"Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " -"when the prime tower is enabled." -msgstr "" - -msgid "Threshold angle" -msgstr "" - -msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "" - -msgid "Tree support branch angle" -msgstr "" - -msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " -"printed more horizontally, allowing them to reach farther." -msgstr "" - -msgid "Preferred Branch Angle" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" -msgid "" -"The preferred angle of the branches, when they do not have to avoid the " -"model. Use a lower angle to make them more vertical and more stable. Use a " -"higher angle for branches to merge faster." -msgstr "" - -msgid "Tree support branch distance" -msgstr "" - -msgid "" -"This setting determines the distance between neighboring tree support nodes." -msgstr "" - -msgid "Branch Density" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Density" -msgid "" -"Adjusts the density of the support structure used to generate the tips of " -"the branches. A higher value results in better overhangs but the supports " -"are harder to remove, thus it is recommended to enable top support " -"interfaces instead of a high branch density value if dense interfaces are " -"needed." -msgstr "" - -msgid "Adaptive layer height" -msgstr "" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - -msgid "Auto brim width" -msgstr "" - -msgid "" -"Enabling this option means the width of the brim for tree support will be " -"automatically calculated" -msgstr "" - -msgid "Tree support brim width" -msgstr "" - -msgid "Distance from tree branch to the outermost brim line" -msgstr "" - -msgid "Tip Diameter" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Tip Diameter" -msgid "Branch tip diameter for organic supports." -msgstr "" - -msgid "Tree support branch diameter" -msgstr "" - -msgid "This setting determines the initial diameter of support nodes." -msgstr "" - -#. TRN PrintSettings: #lmFIXME -msgid "Branch Diameter Angle" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" -msgid "" -"The angle of the branches' diameter as they gradually become thicker towards " -"the bottom. An angle of 0 will cause the branches to have uniform thickness " -"over their length. A bit of an angle can increase stability of the organic " -"support." -msgstr "" - -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" - -msgid "Support wall loops" -msgstr "" - -msgid "This setting specify the count of walls around support" -msgstr "" - -msgid "Tree support with infill" -msgstr "" - -msgid "" -"This setting specifies whether to add infill inside large hollows of tree " -"support" -msgstr "" - -msgid "Activate temperature control" -msgstr "" - -msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" -msgstr "" - -msgid "Chamber temperature" -msgstr "" - -msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" -msgstr "" - -msgid "Nozzle temperature for layers after the initial one" -msgstr "" - -msgid "Detect thin wall" -msgstr "" - -msgid "" -"Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" -msgstr "" - -msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" -msgstr "" - -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "" - -msgid "" -"Line width for top surfaces. If expressed as a %, it will be computed over " -"the nozzle diameter." -msgstr "" - -msgid "Speed of top surface infill which is solid" -msgstr "" - -msgid "Top shell layers" -msgstr "" - -msgid "" -"This is the number of solid layers of top shell, including the top surface " -"layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" -msgstr "" - -msgid "Top solid layers" -msgstr "" - -msgid "Top shell thickness" -msgstr "" - -msgid "" -"The number of top solid layers is increased when slicing if the thickness " -"calculated by top shell layers is thinner than this value. This can avoid " -"having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" -msgstr "" - -msgid "Speed of travel which is faster and without extrusion" -msgstr "" - -msgid "Wipe while retracting" -msgstr "" - -msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" -msgstr "" - -msgid "Wipe Distance" -msgstr "" - -msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" -"\n" -"Depending on how long the wipe operation lasts, how fast and long the " -"extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" -"\n" -"Setting a value in the retract amount before wipe setting below will perform " -"any excess retraction before the wipe, else it will be performed after." -msgstr "" - -msgid "" -"The wiping tower can be used to clean up the residue on the nozzle and " -"stabilize the chamber pressure inside the nozzle, in order to avoid " -"appearance defects when printing objects." -msgstr "" - -msgid "Purging volumes" -msgstr "" - -msgid "Flush multiplier" -msgstr "" - -msgid "" -"The actual flushing volumes is equal to the flush multiplier multiplied by " -"the flushing volumes in the table." -msgstr "" - -msgid "Prime volume" -msgstr "" - -msgid "The volume of material to prime extruder on tower." -msgstr "" - -msgid "Width of prime tower" -msgstr "" - -msgid "Wipe tower rotation angle" -msgstr "" - -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "" - -msgid "Stabilization cone apex angle" -msgstr "" - -msgid "" -"Angle at the apex of the cone that is used to stabilize the wipe tower. " -"Larger angle means wider base." -msgstr "" - -msgid "Wipe tower purge lines spacing" -msgstr "" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "" - -msgid "Wipe tower extruder" -msgstr "" - -msgid "" -"The extruder to use when printing perimeter of the wipe tower. Set to 0 to " -"use the one that is available (non-soluble would be preferred)." -msgstr "" - -msgid "Purging volumes - load/unload volumes" -msgstr "" - -msgid "" -"This vector saves required volumes to change from/to each tool used on the " -"wipe tower. These values are used to simplify creation of the full purging " -"volumes below." -msgstr "" - -msgid "" -"Purging after filament change will be done inside objects' infills. This may " -"lower the amount of waste and decrease the print time. If the walls are " -"printed with transparent filament, the mixed color infill will be seen " -"outside. It will not take effect, unless the prime tower is enabled." -msgstr "" - -msgid "" -"Purging after filament change will be done inside objects' support. This may " -"lower the amount of waste and decrease the print time. It will not take " -"effect, unless the prime tower is enabled." -msgstr "" - -msgid "" -"This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." -msgstr "" - -msgid "Maximal bridging distance" -msgstr "" - -msgid "Maximal distance between supports on sparse infill sections." -msgstr "" - -msgid "X-Y hole compensation" -msgstr "" - -msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" -msgstr "" - -msgid "X-Y contour compensation" -msgstr "" - -msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" -msgstr "" - -msgid "Convert holes to polyholes" -msgstr "" - -msgid "" -"Search for almost-circular holes that span more than one layer and convert " -"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " -"compute the polyhole.\n" -"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" -msgstr "" - -msgid "Polyhole detection margin" -msgstr "" - -#, no-c-format, no-boost-format -msgid "" -"Maximum defection of a point to the estimated radius of the circle.\n" -"As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " -"broaden the detection.\n" -"In mm or in % of the radius." -msgstr "" - -msgid "Polyhole twist" -msgstr "" - -msgid "Rotate the polyhole every layer." -msgstr "" - -msgid "G-code thumbnails" -msgstr "" - -msgid "" -"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " -"following format: \"XxY, XxY, ...\"" -msgstr "" - -msgid "Format of G-code thumbnails" -msgstr "" - -msgid "" -"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" -msgstr "" - -msgid "Use relative E distances" -msgstr "" - -msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " -"Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" -msgstr "" - -msgid "" -"Classic wall generator produces walls with constant extrusion width and for " -"very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" -msgstr "" - -msgid "Classic" -msgstr "" - -msgid "Arachne" -msgstr "" - -msgid "Wall transition length" -msgstr "" - -msgid "" -"When transitioning between different numbers of walls as the part becomes " -"thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" -msgstr "" - -msgid "Wall transitioning filter margin" -msgstr "" - -msgid "" -"Prevent transitioning back and forth between one extra wall and one less. " -"This margin extends the range of extrusion widths which follow to [Minimum " -"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " -"margin reduces the number of transitions, which reduces the number of " -"extrusion starts/stops and travel time. However, large extrusion width " -"variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" -msgstr "" - -msgid "Wall transitioning threshold angle" -msgstr "" - -msgid "" -"When to create transitions between even and odd numbers of walls. A wedge " -"shape with an angle greater than this setting will not have transitions and " -"no walls will be printed in the center to fill the remaining space. Reducing " -"this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" -msgstr "" - -msgid "Wall distribution count" -msgstr "" - -msgid "" -"The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" -msgstr "" - -msgid "Minimum feature size" -msgstr "" - -msgid "" -"Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" -msgstr "" - -msgid "Minimum wall length" -msgstr "" - -msgid "" -"Adjust this value to prevent short, unclosed walls from being printed, which " -"could increase print time. Higher values remove more and longer walls.\n" -"\n" -"NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " -"Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " -"above the default value of 0.5, or if single-wall top surfaces is enabled." -msgstr "" - -msgid "First layer minimum wall width" -msgstr "" - -msgid "" -"The minimum wall width that should be used for the first layer is " -"recommended to be set to the same size as the nozzle. This adjustment is " -"expected to enhance adhesion." -msgstr "" - -msgid "Minimum wall width" -msgstr "" - -msgid "" -"Width of the wall that will replace thin features (according to the Minimum " -"feature size) of the model. If the Minimum wall width is thinner than the " -"thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" -msgstr "" - -msgid "Detect narrow internal solid infill" -msgstr "" - -msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." -msgstr "" - -msgid "invalid value " -msgstr "" - -msgid "Invalid value when spiral vase mode is enabled: " -msgstr "" - -msgid "too large line width " -msgstr "" - -msgid " not in range " -msgstr "" - -msgid "Minimum save" -msgstr "" - -msgid "export 3mf with minimum size." -msgstr "" - -msgid "No check" -msgstr "" - -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "" - -msgid "Ensure on bed" -msgstr "" - -msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" -msgstr "" - -msgid "Orient Options" -msgstr "" - -msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "" - -msgid "Rotation angle around the Z axis in degrees." -msgstr "" - -msgid "Rotate around Y" -msgstr "" - -msgid "Rotation angle around the Y axis in degrees." -msgstr "" - -msgid "Data directory" -msgstr "" - -msgid "" -"Load and store settings at the given directory. This is useful for " -"maintaining different profiles or including configurations from a network " -"storage." -msgstr "" - -msgid "Load custom gcode" -msgstr "" - -msgid "Load custom gcode from json" -msgstr "" - -msgid "Current z-hop" -msgstr "" - -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "" - -msgid "" -"Position of the extruder at the beginning of the custom G-code block. If the " -"custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." -msgstr "" - -msgid "" -"Retraction state at the beginning of the custom G-code block. If the custom " -"G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." -msgstr "" - -msgid "Extra deretraction" -msgstr "" - -msgid "Currently planned extra extruder priming after deretraction." -msgstr "" - -msgid "Current extruder" -msgstr "" - -msgid "Zero-based index of currently used extruder." -msgstr "" - -msgid "Current object index" -msgstr "" - -msgid "" -"Specific for sequential printing. Zero-based index of currently printed " -"object." -msgstr "" - -msgid "Has wipe tower" -msgstr "" - -msgid "Whether or not wipe tower is being generated in the print." -msgstr "" - -msgid "Initial extruder" -msgstr "" - -msgid "" -"Zero-based index of the first extruder used in the print. Same as " -"initial_tool." -msgstr "" - -msgid "Initial tool" -msgstr "" - -msgid "" -"Zero-based index of the first extruder used in the print. Same as " -"initial_extruder." -msgstr "" - -msgid "Is extruder used?" -msgstr "" - -msgid "Vector of bools stating whether a given extruder is used in the print." -msgstr "" - -msgid "Volume per extruder" -msgstr "" - -msgid "Total filament volume extruded per extruder during the entire print." -msgstr "" - -msgid "Total toolchanges" -msgstr "" - -msgid "Number of toolchanges during the print." -msgstr "" - -msgid "Total volume" -msgstr "" - -msgid "Total volume of filament used during the entire print." -msgstr "" - -msgid "Weight per extruder" -msgstr "" - -msgid "" -"Weight per extruder extruded during the entire print. Calculated from " -"filament_density value in Filament Settings." -msgstr "" - -msgid "Total weight" -msgstr "" - -msgid "" -"Total weight of the print. Calculated from filament_density value in " -"Filament Settings." -msgstr "" - -msgid "Total layer count" -msgstr "" - -msgid "Number of layers in the entire print." -msgstr "" - -msgid "Number of objects" -msgstr "" - -msgid "Total number of objects in the print." -msgstr "" - -msgid "Number of instances" -msgstr "" - -msgid "Total number of object instances in the print, summed over all objects." -msgstr "" - -msgid "Scale per object" -msgstr "" - -msgid "" -"Contains a string with the information about what scaling was applied to the " -"individual objects. Indexing of the objects is zero-based (first object has " -"index 0).\n" -"Example: 'x:100% y:50% z:100'." -msgstr "" - -msgid "Input filename without extension" -msgstr "" - -msgid "Source filename of the first object, without extension." -msgstr "" - -msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "" - -msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " -"in mm." -msgstr "" - -msgid "First layer convex hull" -msgstr "" - -msgid "" -"Vector of points of the first layer convex hull. Each element has the " -"following format:'[x, y]' (x and y are floating-point numbers in mm)." -msgstr "" - -msgid "Bottom-left corner of first layer bounding box" -msgstr "" - -msgid "Top-right corner of first layer bounding box" -msgstr "" - -msgid "Size of the first layer bounding box" -msgstr "" - -msgid "Bottom-left corner of print bed bounding box" -msgstr "" - -msgid "Top-right corner of print bed bounding box" -msgstr "" - -msgid "Size of the print bed bounding box" -msgstr "" - -msgid "Timestamp" -msgstr "" - -msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "" - -msgid "Day" -msgstr "" - -msgid "Hour" -msgstr "" - -msgid "Minute" -msgstr "" - -msgid "Print preset name" -msgstr "" - -msgid "Name of the print preset used for slicing." -msgstr "" - -msgid "Filament preset name" -msgstr "" - -msgid "" -"Names of the filament presets used for slicing. The variable is a vector " -"containing one name for each extruder." -msgstr "" - -msgid "Printer preset name" -msgstr "" - -msgid "Name of the printer preset used for slicing." -msgstr "" - -msgid "Physical printer name" -msgstr "" - -msgid "Name of the physical printer used for slicing." -msgstr "" - -msgid "Layer number" -msgstr "" - -msgid "Index of the current layer. One-based (i.e. first layer is number 1)." -msgstr "" - -msgid "Layer z" -msgstr "" - -msgid "" -"Height of the current layer above the print bed, measured to the top of the " -"layer." -msgstr "" - -msgid "Maximal layer z" -msgstr "" - -msgid "Height of the last layer above the print bed." -msgstr "" - -msgid "Filament extruder ID" -msgstr "" - -msgid "The current extruder ID. The same as current_extruder." -msgstr "" - -msgid "Error in zip archive" -msgstr "" - -msgid "Generating walls" -msgstr "" - -msgid "Generating infill regions" -msgstr "" - -msgid "Generating infill toolpath" -msgstr "" - -msgid "Detect overhangs for auto-lift" -msgstr "" - -msgid "Generating support" -msgstr "" - -msgid "Checking support necessity" -msgstr "" - -msgid "floating regions" -msgstr "" - -msgid "floating cantilever" -msgstr "" - -msgid "large overhangs" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"It seems object %s has %s. Please re-orient the object or enable support " -"generation." -msgstr "" - -msgid "Optimizing toolpath" -msgstr "" - -msgid "Slicing mesh" -msgstr "" - -msgid "" -"No layers were detected. You might want to repair your STL file(s) or check " -"their size or thickness and retry.\n" -msgstr "" - -msgid "" -"An object's XY size compensation will not be used because it is also color-" -"painted.\n" -"XY Size compensation can not be combined with color-painting." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "" - -msgid "Support: detect overhangs" -msgstr "" - -msgid "Support: generate contact points" -msgstr "" - -msgid "Support: propagate branches" -msgstr "" - -msgid "Support: draw polygons" -msgstr "" - -msgid "Support: generate toolpath" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: generate polygons at layer %d" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: fix holes at layer %d" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: propagate branches at layer %d" -msgstr "" - -msgid "" -"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." -msgstr "" - -msgid "Loading of a model file failed." -msgstr "" - -msgid "The supplied file couldn't be read because it's empty" -msgstr "" - -msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "" - -msgid "Canceled" -msgstr "" - -msgid "load_obj: failed to parse" -msgstr "" - -msgid "The file contains polygons with more than 4 vertices." -msgstr "" - -msgid "The file contains polygons with less than 2 vertices." -msgstr "" - -msgid "The file contains invalid vertex index." -msgstr "" - -msgid "This OBJ file couldn't be read because it's empty." -msgstr "" - -msgid "Flow Rate Calibration" -msgstr "" - -msgid "Max Volumetric Speed Calibration" -msgstr "" - -msgid "Manage Result" -msgstr "" - -msgid "Manual Calibration" -msgstr "" - -msgid "Result can be read by human eyes." -msgstr "" - -msgid "Auto-Calibration" -msgstr "" - -msgid "We would use Lidar to read the calibration result" -msgstr "" - -msgid "Prev" -msgstr "" - -msgid "Recalibration" -msgstr "" - -msgid "Calibrate" -msgstr "" - -msgid "Finish" -msgstr "" - -msgid "How to use calibration result?" -msgstr "" - -msgid "" -"You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "" - -msgid "" -"The current firmware version of the printer does not support calibration.\n" -"Please upgrade the printer firmware." -msgstr "" - -msgid "Calibration not supported" -msgstr "" - -msgid "Error desc" -msgstr "" - -msgid "Extra info" -msgstr "" - -msgid "Flow Dynamics" -msgstr "" - -msgid "Flow Rate" -msgstr "" - -msgid "Max Volumetric Speed" -msgstr "" - -msgid "Please enter the name you want to save to printer." -msgstr "" - -msgid "The name cannot exceed 40 characters." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Please input valid values:\n" -"Start value: >= %.1f\n" -"End value: <= %.1f\n" -"End value: > Start value\n" -"Value step: >= %.3f)" -msgstr "" - -msgid "The name cannot be empty." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "The selected preset: %s is not found." -msgstr "" - -msgid "The name cannot be the same as the system preset name." -msgstr "" - -msgid "The name is the same as another existing preset name" -msgstr "" - -msgid "create new preset failed." -msgstr "" - -msgid "" -"Are you sure to cancel the current calibration and return to the home page?" -msgstr "" - -msgid "No Printer Connected!" -msgstr "" - -msgid "Printer is not connected yet." -msgstr "" - -msgid "Please select filament to calibrate." -msgstr "" - -msgid "The input value size must be 3." -msgstr "" - -msgid "Connecting to printer..." -msgstr "" - -msgid "The failed test result has been dropped." -msgstr "" - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "" - -msgid "Internal Error" -msgstr "" - -msgid "Please select at least one filament for calibration" -msgstr "" - -msgid "Flow rate calibration result has been saved to preset" -msgstr "" - -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "" - -msgid "When do you need Flow Dynamics Calibration" -msgstr "" - -msgid "" -"We now have added the auto-calibration for different filaments, which is " -"fully automated and the result will be saved into the printer for future " -"use. You only need to do the calibration in the following limited cases:\n" -"1. If you introduce a new filament of different brands/models or the " -"filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" -"3. If the max volumetric speed or print temperature is changed in the " -"filament setting." -msgstr "" - -msgid "About this calibration" -msgstr "" - -msgid "" -"Please find the details of Flow Dynamics Calibration from our wiki.\n" -"\n" -"Usually the calibration is unnecessary. When you start a single color/" -"material print, with the \"flow dynamics calibration\" option checked in the " -"print start menu, the printer will follow the old way, calibrate the " -"filament before the print; When you start a multi color/material print, the " -"printer will use the default compensation parameter for the filament during " -"every filament switch which will have a good result in most cases.\n" -"\n" -"Please note there are a few cases that will make the calibration result not " -"reliable: using a texture plate to do the calibration; the build plate does " -"not have good adhesion (please wash the build plate or apply gluestick!) ..." -"You can find more from our wiki.\n" -"\n" -"The calibration results have about 10 percent jitter in our test, which may " -"cause the result not exactly the same in each calibration. We are still " -"investigating the root cause to do improvements with new updates." -msgstr "" - -msgid "When to use Flow Rate Calibration" -msgstr "" - -msgid "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." -msgstr "" - -msgid "" -"In addition, Flow Rate Calibration is crucial for foaming materials like LW-" -"PLA used in RC planes. These materials expand greatly when heated, and " -"calibration provides a useful reference flow rate." -msgstr "" - -msgid "" -"Flow Rate Calibration measures the ratio of expected to actual extrusion " -"volumes. The default setting works well in Bambu Lab printers and official " -"filaments as they were pre-calibrated and fine-tuned. For a regular " -"filament, you usually won't need to perform a Flow Rate Calibration unless " -"you still see the listed defects after you have done other calibrations. For " -"more details, please check out the wiki article." -msgstr "" - -msgid "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not " -"be suitable for this calibration and can produce less-than-desirable " -"results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before doing it." -msgstr "" - -msgid "When you need Max Volumetric Speed Calibration" -msgstr "" - -msgid "Over-extrusion or under extrusion" -msgstr "" - -msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "" - -msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "" - -msgid "materials with inaccurate filament diameter" -msgstr "" - -msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "" - -msgid "" -"Part of the calibration failed! You may clean the plate and retry. The " -"failed test result would be dropped." -msgstr "" - -msgid "" -"*We recommend you to add brand, materia, type, and even humidity level in " -"the Name" -msgstr "" - -msgid "Failed" -msgstr "" - -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to overrides the other results?" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"There is already a historical calibration result with the same name: %s. " -"Only one of the results with the same name is saved. Are you sure you want " -"to overrides the historical result?" -msgstr "" - -msgid "Please find the best line on your plate" -msgstr "" - -msgid "Please find the cornor with perfect degree of extrusion" -msgstr "" - -msgid "Input Value" -msgstr "" - -msgid "Save to Filament Preset" -msgstr "" - -msgid "Preset" -msgstr "" - -msgid "Record Factor" -msgstr "" - -msgid "We found the best flow ratio for you" -msgstr "" - -msgid "Flow Ratio" -msgstr "" - -msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "" - -msgid "Please enter the name of the preset you want to save." -msgstr "" - -msgid "Calibration1" -msgstr "" - -msgid "Calibration2" -msgstr "" - -msgid "Please find the best object on your plate" -msgstr "" - -msgid "Fill in the value above the block with smoothest top surface" -msgstr "" - -msgid "Skip Calibration2" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "flow ratio : %s " -msgstr "" - -msgid "Please choose a block with smoothest top surface" -msgstr "" - -msgid "Please choose a block with smoothest top surface." -msgstr "" - -msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "" - -msgid "Calibration Type" -msgstr "" - -msgid "Complete Calibration" -msgstr "" - -msgid "Fine Calibration based on flow ratio" -msgstr "" - -msgid "Title" -msgstr "" - -msgid "" -"A test model will be printed. Please clear the build plate and place it back " -"to the hot bed before calibration." -msgstr "" - -msgid "Printing Parameters" -msgstr "" - -msgid "- ℃" -msgstr "" - -msgid " ℃" -msgstr "" - -msgid "Plate Type" -msgstr "" - -msgid "filament position" -msgstr "" - -msgid "External Spool" -msgstr "" - -msgid "Filament For Calibration" -msgstr "" - -msgid "" -"Tips for calibration material: \n" -"- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" -msgstr "" - -msgid "Pattern" -msgstr "" - -msgid "Method" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "%s is not compatible with %s" -msgstr "" - -msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "" - -msgid "Connecting to printer" -msgstr "" - -msgid "From k Value" -msgstr "" - -msgid "To k Value" -msgstr "" - -msgid "Step value" -msgstr "" - -msgid "0.5" -msgstr "" - -msgid "0.005" -msgstr "" - -msgid "The nozzle diameter has been synchronized from the printer Settings" -msgstr "" - -msgid "From Volumetric Speed" -msgstr "" - -msgid "To Volumetric Speed" -msgstr "" - -msgid "Flow Dynamics Calibration Result" -msgstr "" - -msgid "No History Result" -msgstr "" - -msgid "Success to get history result" -msgstr "" - -msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "" - -msgid "Action" -msgstr "" - -msgid "Edit Flow Dynamics Calibration" -msgstr "" - -msgid "Network lookup" -msgstr "" - -msgid "Address" -msgstr "" - -msgid "Hostname" -msgstr "" - -msgid "Service name" -msgstr "" - -msgid "OctoPrint version" -msgstr "" - -msgid "Searching for devices" -msgstr "" - -msgid "Finished" -msgstr "" - -msgid "Multiple resolved IP addresses" -msgstr "" - -#, possible-boost-format -msgid "" -"There are several IP addresses resolving to hostname %1%.\n" -"Please select one that should be used." -msgstr "" - -msgid "PA Calibration" -msgstr "" - -msgid "DDE" -msgstr "" - -msgid "Bowden" -msgstr "" - -msgid "Extruder type" -msgstr "" - -msgid "PA Tower" -msgstr "" - -msgid "PA Line" -msgstr "" - -msgid "PA Pattern" -msgstr "" - -msgid "Start PA: " -msgstr "" - -msgid "End PA: " -msgstr "" - -msgid "PA step: " -msgstr "" - -msgid "Print numbers" -msgstr "" - -msgid "" -"Please input valid values:\n" -"Start PA: >= 0.0\n" -"End PA: > Start PA\n" -"PA step: >= 0.001)" -msgstr "" - -msgid "Temperature calibration" -msgstr "" - -msgid "PLA" -msgstr "" - -msgid "ABS/ASA" -msgstr "" - -msgid "PETG" -msgstr "" - -msgid "TPU" -msgstr "" - -msgid "PA-CF" -msgstr "" - -msgid "PET-CF" -msgstr "" - -msgid "Filament type" -msgstr "" - -msgid "Start temp: " -msgstr "" - -msgid "End temp: " -msgstr "" - -msgid "Temp step: " -msgstr "" - -msgid "" -"Please input valid values:\n" -"Start temp: <= 350\n" -"End temp: >= 170\n" -"Start temp > End temp + 5)" -msgstr "" - -msgid "Max volumetric speed test" -msgstr "" - -msgid "Start volumetric speed: " -msgstr "" - -msgid "End volumetric speed: " -msgstr "" - -msgid "step: " -msgstr "" - -msgid "" -"Please input valid values:\n" -"start > 0 \n" -"step >= 0\n" -"end > start + step)" -msgstr "" - -msgid "VFA test" -msgstr "" - -msgid "Start speed: " -msgstr "" - -msgid "End speed: " -msgstr "" - -msgid "" -"Please input valid values:\n" -"start > 10 \n" -"step >= 0\n" -"end > start + step)" -msgstr "" - -msgid "Start retraction length: " -msgstr "" - -msgid "End retraction length: " -msgstr "" - -msgid "mm/mm" -msgstr "" - -msgid "Send G-Code to printer host" -msgstr "" - -msgid "Upload to Printer Host with the following filename:" -msgstr "" - -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "" - -msgid "Upload to storage" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "" - -msgid "Upload" -msgstr "" - -msgid "Print host upload queue" -msgstr "" - -msgid "ID" -msgstr "" - -msgid "Progress" -msgstr "" - -msgid "Host" -msgstr "" - -msgctxt "OfFile" -msgid "Size" -msgstr "" - -msgid "Filename" -msgstr "" - -msgid "Cancel selected" -msgstr "" - -msgid "Show error message" -msgstr "" - -msgid "Enqueued" -msgstr "" - -msgid "Uploading" -msgstr "" - -msgid "Cancelling" -msgstr "" - -msgid "Error uploading to print host" -msgstr "" - -msgid "Unable to perform boolean operation on selected parts" -msgstr "" - -msgid "Mesh Boolean" -msgstr "" - -msgid "Union" -msgstr "" - -msgid "Difference" -msgstr "" - -msgid "Intersection" -msgstr "" - -msgid "Source Volume" -msgstr "" - -msgid "Tool Volume" -msgstr "" - -msgid "Subtract from" -msgstr "" - -msgid "Subtract with" -msgstr "" - -msgid "selected" -msgstr "" - -msgid "Part 1" -msgstr "" - -msgid "Part 2" -msgstr "" - -msgid "Delete input" -msgstr "" - -msgid "Network Test" -msgstr "" - -msgid "Start Test Multi-Thread" -msgstr "" - -msgid "Start Test Single-Thread" -msgstr "" - -msgid "Export Log" -msgstr "" - -msgid "Studio Version:" -msgstr "" - -msgid "System Version:" -msgstr "" - -msgid "DNS Server:" -msgstr "" - -msgid "Test BambuLab" -msgstr "" - -msgid "Test BambuLab:" -msgstr "" - -msgid "Test Bing.com" -msgstr "" - -msgid "Test bing.com:" -msgstr "" - -msgid "Test HTTP" -msgstr "" - -msgid "Test HTTP Service:" -msgstr "" - -msgid "Test storage" -msgstr "" - -msgid "Test Storage Upload:" -msgstr "" - -msgid "Test storage upgrade" -msgstr "" - -msgid "Test Storage Upgrade:" -msgstr "" - -msgid "Test storage download" -msgstr "" - -msgid "Test Storage Download:" -msgstr "" - -msgid "Test plugin download" -msgstr "" - -msgid "Test Plugin Download:" -msgstr "" - -msgid "Test Storage Upload" -msgstr "" - -msgid "Log Info" -msgstr "" - -msgid "Select filament preset" -msgstr "" - -msgid "Create Filament" -msgstr "" - -msgid "Create Based on Current Filament" -msgstr "" - -msgid "Copy Current Filament Preset " -msgstr "" - -msgid "Basic Information" -msgstr "" - -msgid "Add Filament Preset under this filament" -msgstr "" - -msgid "We could create the filament presets for your following printer:" -msgstr "" - -msgid "Select Vendor" -msgstr "" - -msgid "Input Custom Vendor" -msgstr "" - -msgid "Can't find vendor I want" -msgstr "" - -msgid "Select Type" -msgstr "" - -msgid "Select Filament Preset" -msgstr "" - -msgid "Serial" -msgstr "" - -msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "" - -msgid "Filament Preset" -msgstr "" - -msgid "Create" -msgstr "" - -msgid "Vendor is not selected, please reselect vendor." -msgstr "" - -msgid "Custom vendor is not input, please input custom vendor." -msgstr "" - -msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." -msgstr "" - -msgid "Filament type is not selected, please reselect type." -msgstr "" - -msgid "Filament serial is not inputed, please input serial." -msgstr "" - -msgid "" -"There may be escape characters in the vendor or serial input of filament. " -"Please delete and re-enter." -msgstr "" - -msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." -msgstr "" - -msgid "The vendor can not be a number. Please re-enter." -msgstr "" - -msgid "" -"You have not selected a printer or preset yet. Please select at least one." -msgstr "" - -msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "" - -msgid "" -"\n" -"Do you want to rewrite it?" -msgstr "" - -msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" -msgstr "" - -msgid "Create Printer/Nozzle" -msgstr "" - -msgid "Create Printer" -msgstr "" - -msgid "Create Nozzle for Existing Printer" -msgstr "" - -msgid "Create from Template" -msgstr "" - -msgid "Create Based on Current Printer" -msgstr "" - -msgid "Import Preset" -msgstr "" - -msgid "Create Type" -msgstr "" - -msgid "The model is not fond, place reselect vendor." -msgstr "" - -msgid "Select Model" -msgstr "" - -msgid "Select Printer" -msgstr "" - -msgid "Input Custom Model" -msgstr "" - -msgid "Can't find my printer model" -msgstr "" - -msgid "Rectangle" -msgstr "" - -msgid "Printable Space" -msgstr "" - -msgid "X" -msgstr "" - -msgid "Y" -msgstr "" - -msgid "Hot Bed STL" -msgstr "" - -msgid "Load stl" -msgstr "" - -msgid "Hot Bed SVG" -msgstr "" - -msgid "Load svg" -msgstr "" - -msgid "Max Print Height" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "The file exceeds %d MB, please import again." -msgstr "" - -msgid "Exception in obtaining file size, please import again." -msgstr "" - -msgid "Preset path is not find, please reselect vendor." -msgstr "" - -msgid "The printer model was not found, please reselect." -msgstr "" - -msgid "The nozzle diameter is not fond, place reselect." -msgstr "" - -msgid "The printer preset is not fond, place reselect." -msgstr "" - -msgid "Printer Preset" -msgstr "" - -msgid "Filament Preset Template" -msgstr "" - -msgid "Deselect All" -msgstr "" - -msgid "Process Preset Template" -msgstr "" - -msgid "Back Page 1" -msgstr "" - -msgid "" -"You have not yet chosen which printer preset to create based on. Please " -"choose the vendor and model of the printer" -msgstr "" - -msgid "" -"You have entered an illegal input in the printable area section on the first " -"page. Please check before creating it." -msgstr "" - -msgid "The custom printer or model is not inputed, place input." -msgstr "" - -msgid "" -"The printer preset you created already has a preset with the same name. Do " -"you want to overwrite it?\n" -"\tYes: Overwrite the printer preset with the same name, and filament and " -"process presets with the same preset name will be recreated \n" -"and filament and process presets without the same preset name will be " -"reserve.\n" -"\tCancel: Do not create a preset, return to the creation interface." -msgstr "" - -msgid "You need to select at least one filament preset." -msgstr "" - -msgid "You need to select at least one process preset." -msgstr "" - -msgid "Create filament presets failed. As follows:\n" -msgstr "" - -msgid "Create process presets failed. As follows:\n" -msgstr "" - -msgid "Vendor is not find, please reselect." -msgstr "" - -msgid "Current vendor has no models, please reselect." -msgstr "" - -msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " -"model." -msgstr "" - -msgid "" -"There may be escape characters in the custom printer vendor or model. Please " -"delete and re-enter." -msgstr "" - -msgid "" -"All inputs in the custom printer vendor or model are spaces. Please re-enter." -msgstr "" - -msgid "Please check bed printable shape and origin input." -msgstr "" - -msgid "" -"You have not yet selected the printer to replace the nozzle, please choose." -msgstr "" - -msgid "Create Printer Successful" -msgstr "" - -msgid "Create Filament Successful" -msgstr "" - -msgid "Printer Created" -msgstr "" - -msgid "Please go to printer settings to edit your presets" -msgstr "" - -msgid "Filament Created" -msgstr "" - -msgid "" -"Please go to filament setting to edit your presets if you need.\n" -"Please note that nozzle temperature, hot bed temperature, and maximum " -"volumetric speed have a significant impact on printing quality. Please set " -"them carefully." -msgstr "" - -msgid "Printer Setting" -msgstr "" - -msgid "Export Configs" -msgstr "" - -msgid "Printer config bundle(.orca_printer)" -msgstr "" - -msgid "Filament bundle(.orca_filament)" -msgstr "" - -msgid "Printer presets(.zip)" -msgstr "" - -msgid "Filament presets(.zip)" -msgstr "" - -msgid "Process presets(.zip)" -msgstr "" - -msgid "initialize fail" -msgstr "" - -msgid "add file fail" -msgstr "" - -msgid "add bundle structure file fail" -msgstr "" - -msgid "finalize fail" -msgstr "" - -msgid "open zip written fail" -msgstr "" - -msgid "Export successful" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"The '%s' folder already exists in the current directory. Do you want to " -"clear it and rebuild it.\n" -"If not, a time suffix will be added, and you can modify the name after " -"creation." -msgstr "" - -msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" -"Can be shared with others." -msgstr "" - -msgid "" -"User's fillment preset set. \n" -"Can be shared with others." -msgstr "" - -msgid "" -"Only display printer names with changes to printer, filament, and process " -"presets." -msgstr "" - -msgid "Only display the filament names with changes to filament presets." -msgstr "" - -msgid "" -"Only printer names with user printer presets will be displayed, and each " -"preset you choose will be exported as a zip." -msgstr "" - -msgid "" -"Only the filament names with user filament presets will be displayed, \n" -"and all user filament presets in each filament name you select will be " -"exported as a zip." -msgstr "" - -msgid "" -"Only printer names with changed process presets will be displayed, \n" -"and all user process presets in each printer name you select will be " -"exported as a zip." -msgstr "" - -msgid "Please select at least one printer or filament." -msgstr "" - -msgid "Please select a type you want to export" -msgstr "" - -msgid "Edit Filament" -msgstr "" - -msgid "Filament presets under this filament" -msgstr "" - -msgid "" -"Note: If the only preset under this filament is deleted, the filament will " -"be deleted after exiting the dialog." -msgstr "" - -msgid "Presets inherited by other presets can not be deleted" -msgstr "" - -msgid "The following presets inherits this preset." -msgid_plural "The following preset inherits this preset." -msgstr[0] "" -msgstr[1] "" - -msgid "Delete Preset" -msgstr "" - -msgid "Are you sure to delete the selected preset?" -msgstr "" - -msgid "Delete preset" -msgstr "" - -msgid "+ Add Preset" -msgstr "" - -msgid "Delete Filament" -msgstr "" - -msgid "" -"All the filament presets belong to this filament would be deleted. \n" -"If you are using this filament on your printer, please reset the filament " -"information for that slot." -msgstr "" - -msgid "Delete filament" -msgstr "" - -msgid "Add Preset" -msgstr "" - -msgid "Add preset for new printer" -msgstr "" - -msgid "Copy preset from filament" -msgstr "" - -msgid "The filament choice not find filament preset, please reselect it" -msgstr "" - -msgid "[Delete Required]" -msgstr "" - -msgid "Edit Preset" -msgstr "" - -msgid "For more information, please check out Wiki" -msgstr "" - -msgid "Collapse" -msgstr "" - -msgid "Daily Tips" -msgstr "" - -msgid "Need select printer" -msgstr "" - -msgid "The start, end or step is not valid value." -msgstr "" - -msgid "" -"Unable to calibrate: maybe because the set calibration value range is too " -"large, or the step is too small" -msgstr "" - -msgid "Physical Printer" -msgstr "" - -msgid "Print Host upload" -msgstr "" - -msgid "Could not get a valid Printer Host reference" -msgstr "" - -msgid "Success!" -msgstr "" - -msgid "Refresh Printers" -msgstr "" - -msgid "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." -msgstr "" - -msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "" - -msgid "Open CA certificate file" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"On this system, %s uses HTTPS certificates from the system Certificate Store " -"or Keychain." -msgstr "" - -msgid "" -"To use a custom CA file, please import your CA file into Certificate Store / " -"Keychain." -msgstr "" - -msgid "Connection to printers connected via the print host failed." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Mismatched type of print host: %s" -msgstr "" - -msgid "Connection to AstroBox works correctly." -msgstr "" - -msgid "Could not connect to AstroBox" -msgstr "" - -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "" - -msgid "Connection to Duet works correctly." -msgstr "" - -msgid "Could not connect to Duet" -msgstr "" - -msgid "Unknown error occured" -msgstr "" - -msgid "Wrong password" -msgstr "" - -msgid "Could not get resources to create a new connection" -msgstr "" - -msgid "Upload not enabled on FlashAir card." -msgstr "" - -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "" - -msgid "Could not connect to FlashAir" -msgstr "" - -msgid "" -"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " -"is required." -msgstr "" - -msgid "Connection to MKS works correctly." -msgstr "" - -msgid "Could not connect to MKS" -msgstr "" - -msgid "Connection to OctoPrint works correctly." -msgstr "" - -msgid "Could not connect to OctoPrint" -msgstr "" - -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "" - -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "" - -msgid "Could not connect to Prusa SLA" -msgstr "" - -msgid "Connection to PrusaLink works correctly." -msgstr "" - -msgid "Could not connect to PrusaLink" -msgstr "" - -msgid "Storages found" -msgstr "" - -#. TRN %1% = storage path -#, possible-boost-format -msgid "%1% : read only" -msgstr "" - -#. TRN %1% = storage path -#, possible-boost-format -msgid "%1% : no free space" -msgstr "" - -#. TRN %1% = host -#, possible-boost-format -msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "" - -msgid "Connection to Prusa Connect works correctly." -msgstr "" - -msgid "Could not connect to Prusa Connect" -msgstr "" - -msgid "Connection to Repetier works correctly." -msgstr "" - -msgid "Could not connect to Repetier" -msgstr "" - -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "" - -#, possible-boost-format -msgid "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" -msgstr "" - -#, possible-boost-format -msgid "" -"Parsing of host response failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" -msgstr "" - -#, possible-boost-format -msgid "" -"Enumeration of host printers failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" -msgstr "" +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" + +msgid "Supports Painting" +msgstr "" + +msgid "Alt + Mouse wheel" +msgstr "" + +msgid "Section view" +msgstr "" + +msgid "Reset direction" +msgstr "" + +msgid "Ctrl + Mouse wheel" +msgstr "" + +msgid "Pen size" +msgstr "" + +msgid "Left mouse button" +msgstr "" + +msgid "Enforce supports" +msgstr "" + +msgid "Right mouse button" +msgstr "" + +msgid "Block supports" +msgstr "" + +msgid "Shift + Left mouse button" +msgstr "" + +msgid "Erase" +msgstr "" + +msgid "Erase all painting" +msgstr "" + +msgid "Highlight overhang areas" +msgstr "" + +msgid "Gap fill" +msgstr "" + +msgid "Perform" +msgstr "" + +msgid "Gap area" +msgstr "" + +msgid "Tool type" +msgstr "" + +msgid "Smart fill angle" +msgstr "" + +msgid "On overhangs only" +msgstr "" + +msgid "Auto support threshold angle: " +msgstr "" + +msgid "Circle" +msgstr "" + +msgid "Sphere" +msgstr "" + +msgid "Fill" +msgstr "" + +msgid "Gap Fill" +msgstr "" + +#, possible-boost-format +msgid "Allows painting only on facets selected by: \"%1%\"" +msgstr "" + +msgid "Highlight faces according to overhang angle." +msgstr "" + +msgid "No auto support" +msgstr "" + +msgid "Support Generated" +msgstr "" + +msgid "Gizmo-Place on Face" +msgstr "" + +msgid "Lay on face" +msgstr "" + +#, possible-boost-format +msgid "" +"Filament count exceeds the maximum number that painting tool supports. only " +"the first %1% filaments will be available in painting tool." +msgstr "" + +msgid "Color Painting" +msgstr "" + +msgid "Pen shape" +msgstr "" + +msgid "Paint" +msgstr "" + +msgid "Key 1~9" +msgstr "" + +msgid "Choose filament" +msgstr "" + +msgid "Edge detection" +msgstr "" + +msgid "Triangles" +msgstr "" + +msgid "Filaments" +msgstr "" + +msgid "Brush" +msgstr "" + +msgid "Smart fill" +msgstr "" + +msgid "Bucket fill" +msgstr "" + +msgid "Height range" +msgstr "" + +msgid "Alt + Shift + Enter" +msgstr "" + +msgid "Toggle Wireframe" +msgstr "" + +msgid "Shortcut Key " +msgstr "" + +msgid "Triangle" +msgstr "" + +msgid "Height Range" +msgstr "" + +msgid "Vertical" +msgstr "" + +msgid "Horizontal" +msgstr "" + +msgid "Remove painted color" +msgstr "" + +#, possible-boost-format +msgid "Painted using: Filament %1%" +msgstr "" + +msgid "Move" +msgstr "" + +msgid "Gizmo-Move" +msgstr "" + +msgid "Rotate" +msgstr "" + +msgid "Gizmo-Rotate" +msgstr "" + +msgid "Optimize orientation" +msgstr "" + +msgid "Apply" +msgstr "" + +msgid "Scale" +msgstr "" + +msgid "Gizmo-Scale" +msgstr "" + +msgid "Error: Please close all toolbar menus first" +msgstr "" + +msgid "in" +msgstr "" + +msgid "mm" +msgstr "" + +msgid "Position" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "" + +msgid "Scale ratios" +msgstr "" + +msgid "Object Operations" +msgstr "" + +msgid "Volume Operations" +msgstr "" + +msgid "Translate" +msgstr "" + +msgid "Group Operations" +msgstr "" + +msgid "Set Position" +msgstr "" + +msgid "Set Orientation" +msgstr "" + +msgid "Set Scale" +msgstr "" + +msgid "Reset Position" +msgstr "" + +msgid "Reset Rotation" +msgstr "" + +msgid "World coordinates" +msgstr "" + +msgid "°" +msgstr "" + +#. TRN - Input label. Be short as possible +msgid "Size" +msgstr "" + +msgid "%" +msgstr "" + +msgid "uniform scale" +msgstr "" + +msgid "Planar" +msgstr "" + +msgid "Dovetail" +msgstr "" + +msgid "Auto" +msgstr "" + +msgid "Manual" +msgstr "" + +msgid "Plug" +msgstr "" + +msgid "Dowel" +msgstr "" + +msgid "Snap" +msgstr "" + +msgid "Prism" +msgstr "" + +msgid "Frustum" +msgstr "" + +msgid "Square" +msgstr "" + +msgid "Hexagon" +msgstr "" + +msgid "Keep orientation" +msgstr "" + +msgid "Place on cut" +msgstr "" + +msgid "Flip upside down" +msgstr "" + +msgid "Connectors" +msgstr "" + +msgid "Type" +msgstr "" + +msgid "Style" +msgstr "" + +msgid "Shape" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Size in emboss direction +#. TRN - Input label. Be short as possible +msgid "Depth" +msgstr "" + +msgid "Groove" +msgstr "" + +msgid "Width" +msgstr "" + +msgid "Flap Angle" +msgstr "" + +msgid "Groove Angle" +msgstr "" + +msgid "Part" +msgstr "" + +msgid "Object" +msgstr "" + +msgid "" +"Click to flip the cut plane\n" +"Drag to move the cut plane" +msgstr "" + +msgid "" +"Click to flip the cut plane\n" +"Drag to move the cut plane\n" +"Right-click a part to assign it to the other side" +msgstr "" + +msgid "Move cut plane" +msgstr "" + +msgid "Mode" +msgstr "" + +msgid "Change cut mode" +msgstr "" + +msgid "Tolerance" +msgstr "" + +msgid "Drag" +msgstr "" + +msgid "Draw cut line" +msgstr "" + +msgid "Left click" +msgstr "" + +msgid "Add connector" +msgstr "" + +msgid "Right click" +msgstr "" + +msgid "Remove connector" +msgstr "" + +msgid "Move connector" +msgstr "" + +msgid "Add connector to selection" +msgstr "" + +msgid "Remove connector from selection" +msgstr "" + +msgid "Select all connectors" +msgstr "" + +msgid "Cut" +msgstr "" + +msgid "Rotate cut plane" +msgstr "" + +msgid "Remove connectors" +msgstr "" + +msgid "Bulge" +msgstr "" + +msgid "Bulge proportion related to radius" +msgstr "" + +msgid "Space" +msgstr "" + +msgid "Space proportion related to radius" +msgstr "" + +msgid "Confirm connectors" +msgstr "" + +msgid "Cancel" +msgstr "" + +msgid "Build Volume" +msgstr "" + +msgid "Flip cut plane" +msgstr "" + +msgid "Groove change" +msgstr "" + +msgid "Reset" +msgstr "" + +#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. +msgid "Edited" +msgstr "" + +msgid "Cut position" +msgstr "" + +msgid "Reset cutting plane" +msgstr "" + +msgid "Edit connectors" +msgstr "" + +msgid "Add connectors" +msgstr "" + +msgid "Reset cut" +msgstr "" + +msgid "Reset cutting plane and remove connectors" +msgstr "" + +msgid "Upper part" +msgstr "" + +msgid "Lower part" +msgstr "" + +msgid "Keep" +msgstr "" + +msgid "Flip" +msgstr "" + +msgid "After cut" +msgstr "" + +msgid "Cut to parts" +msgstr "" + +msgid "Perform cut" +msgstr "" + +msgid "Warning" +msgstr "" + +msgid "Invalid connectors detected" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%1$d connector is out of cut contour" +msgid_plural "%1$d connectors are out of cut contour" +msgstr[0] "" +msgstr[1] "" + +#, possible-c-format, possible-boost-format +msgid "%1$d connector is out of object" +msgid_plural "%1$d connectors are out of object" +msgstr[0] "" +msgstr[1] "" + +msgid "Some connectors are overlapped" +msgstr "" + +msgid "Select at least one object to keep after cutting." +msgstr "" + +msgid "Cut plane is placed out of object" +msgstr "" + +msgid "Cut plane with groove is invalid" +msgstr "" + +msgid "Connector" +msgstr "" + +msgid "Cut by Plane" +msgstr "" + +msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgstr "" + +msgid "Repairing model object" +msgstr "" + +msgid "Cut by line" +msgstr "" + +msgid "Delete connector" +msgstr "" + +msgid "Mesh name" +msgstr "" + +msgid "Detail level" +msgstr "" + +msgid "Decimate ratio" +msgstr "" + +#, possible-boost-format +msgid "" +"Processing model '%1%' with more than 1M triangles could be slow. It is " +"highly recommended to simplify the model." +msgstr "" + +msgid "Simplify model" +msgstr "" + +msgid "Simplify" +msgstr "" + +msgid "Simplification is currently only allowed when a single part is selected" +msgstr "" + +msgid "Error" +msgstr "" + +msgid "Extra high" +msgstr "" + +msgid "High" +msgstr "" + +msgid "Medium" +msgstr "" + +msgid "Low" +msgstr "" + +msgid "Extra low" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%d triangles" +msgstr "" + +msgid "Show wireframe" +msgstr "" + +#, possible-boost-format +msgid "%1%" +msgstr "" + +msgid "Can't apply when proccess preview." +msgstr "" + +msgid "Operation already cancelling. Please wait few seconds." +msgstr "" + +msgid "Face recognition" +msgstr "" + +msgid "Perform Recognition" +msgstr "" + +msgid "Brush size" +msgstr "" + +msgid "Brush shape" +msgstr "" + +msgid "Enforce seam" +msgstr "" + +msgid "Block seam" +msgstr "" + +msgid "Seam painting" +msgstr "" + +msgid "Remove selection" +msgstr "" + +msgid "Entering Seam painting" +msgstr "" + +msgid "Leaving Seam painting" +msgstr "" + +msgid "Paint-on seam editing" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Select look of letter shape +msgid "Font" +msgstr "" + +msgid "Thickness" +msgstr "" + +msgid "Text Gap" +msgstr "" + +msgid "Angle" +msgstr "" + +msgid "" +"Embeded\n" +"depth" +msgstr "" + +msgid "Input text" +msgstr "" + +msgid "Surface" +msgstr "" + +msgid "Horizontal text" +msgstr "" + +msgid "Shift + Mouse move up or dowm" +msgstr "" + +msgid "Rotate text" +msgstr "" + +msgid "Text shape" +msgstr "" + +#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe +msgid "Text rotate" +msgstr "" + +#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface +msgid "Text move" +msgstr "" + +msgid "Set Mirror" +msgstr "" + +msgid "Embossed text" +msgstr "" + +msgid "Enter emboss gizmo" +msgstr "" + +msgid "Leave emboss gizmo" +msgstr "" + +msgid "Embossing actions" +msgstr "" + +msgid "Emboss" +msgstr "" + +msgid "NORMAL" +msgstr "" + +msgid "SMALL" +msgstr "" + +msgid "ITALIC" +msgstr "" + +msgid "SWISS" +msgstr "" + +msgid "MODERN" +msgstr "" + +msgid "First font" +msgstr "" + +msgid "Default font" +msgstr "" + +msgid "Advanced" +msgstr "" + +msgid "" +"The text cannot be written using the selected font. Please try choosing a " +"different font." +msgstr "" + +msgid "Embossed text cannot contain only white spaces." +msgstr "" + +msgid "Text contains character glyph (represented by '?') unknown by font." +msgstr "" + +msgid "Text input doesn't show font skew." +msgstr "" + +msgid "Text input doesn't show font boldness." +msgstr "" + +msgid "Text input doesn't show gap between lines." +msgstr "" + +msgid "Too tall, diminished font height inside text input." +msgstr "" + +msgid "Too small, enlarged font height inside text input." +msgstr "" + +msgid "Text doesn't show current horizontal alignment." +msgstr "" + +msgid "Revert font changes." +msgstr "" + +#, possible-boost-format +msgid "Font \"%1%\" can't be selected." +msgstr "" + +msgid "Operation" +msgstr "" + +msgid "Join" +msgstr "" + +msgid "Click to change text into object part." +msgstr "" + +msgid "You can't change a type of the last solid part of the object." +msgstr "" + +msgctxt "EmbossOperation" +msgid "Cut" +msgstr "" + +msgid "Click to change part type into negative volume." +msgstr "" + +msgid "Modifier" +msgstr "" + +msgid "Click to change part type into modifier." +msgstr "" + +msgid "Change Text Type" +msgstr "" + +#, possible-boost-format +msgid "Rename style(%1%) for embossing text" +msgstr "" + +msgid "Name can't be empty." +msgstr "" + +msgid "Name has to be unique." +msgstr "" + +msgid "OK" +msgstr "" + +msgid "Rename style" +msgstr "" + +msgid "Rename current style." +msgstr "" + +msgid "Can't rename temporary style." +msgstr "" + +msgid "First Add style to list." +msgstr "" + +#, possible-boost-format +msgid "Save %1% style" +msgstr "" + +msgid "No changes to save." +msgstr "" + +msgid "New name of style" +msgstr "" + +msgid "Save as new style" +msgstr "" + +msgid "Only valid font can be added to style." +msgstr "" + +msgid "Add style to my list." +msgstr "" + +msgid "Save as new style." +msgstr "" + +msgid "Remove style" +msgstr "" + +msgid "Can't remove the last existing style." +msgstr "" + +#, possible-boost-format +msgid "Are you sure you want to permanently remove the \"%1%\" style?" +msgstr "" + +#, possible-boost-format +msgid "Delete \"%1%\" style." +msgstr "" + +#, possible-boost-format +msgid "Can't delete \"%1%\". It is last style." +msgstr "" + +#, possible-boost-format +msgid "Can't delete temporary style \"%1%\"." +msgstr "" + +#, possible-boost-format +msgid "Modified style \"%1%\"" +msgstr "" + +#, possible-boost-format +msgid "Current style is \"%1%\"" +msgstr "" + +#, possible-boost-format +msgid "" +"Changing style to \"%1%\" will discard current style modification.\n" +"\n" +"Would you like to continue anyway?" +msgstr "" + +msgid "Not valid style." +msgstr "" + +#, possible-boost-format +msgid "Style \"%1%\" can't be used and will be removed from a list." +msgstr "" + +msgid "Unset italic" +msgstr "" + +msgid "Set italic" +msgstr "" + +msgid "Unset bold" +msgstr "" + +msgid "Set bold" +msgstr "" + +msgid "Revert text size." +msgstr "" + +msgid "Revert embossed depth." +msgstr "" + +msgid "" +"Advanced options cannot be changed for the selected font.\n" +"Select another font." +msgstr "" + +msgid "Revert using of model surface." +msgstr "" + +msgid "Revert Transformation per glyph." +msgstr "" + +msgid "Set global orientation for whole text." +msgstr "" + +msgid "Set position and orientation per glyph." +msgstr "" + +msgctxt "Alignment" +msgid "Left" +msgstr "" + +msgctxt "Alignment" +msgid "Center" +msgstr "" + +msgctxt "Alignment" +msgid "Right" +msgstr "" + +msgctxt "Alignment" +msgid "Top" +msgstr "" + +msgctxt "Alignment" +msgid "Middle" +msgstr "" + +msgctxt "Alignment" +msgid "Bottom" +msgstr "" + +msgid "Revert alignment." +msgstr "" + +#. TRN EmbossGizmo: font units +msgid "points" +msgstr "" + +msgid "Revert gap between characters" +msgstr "" + +msgid "Distance between characters" +msgstr "" + +msgid "Revert gap between lines" +msgstr "" + +msgid "Distance between lines" +msgstr "" + +msgid "Undo boldness" +msgstr "" + +msgid "Tiny / Wide glyphs" +msgstr "" + +msgid "Undo letter's skew" +msgstr "" + +msgid "Italic strength ratio" +msgstr "" + +msgid "Undo translation" +msgstr "" + +msgid "Distance of the center of the text to the model surface." +msgstr "" + +msgid "Undo rotation" +msgstr "" + +msgid "Rotate text Clock-wise." +msgstr "" + +msgid "Unlock the text's rotation when moving text along the object's surface." +msgstr "" + +msgid "Lock the text's rotation when moving text along the object's surface." +msgstr "" + +msgid "Select from True Type Collection." +msgstr "" + +msgid "Set text to face camera" +msgstr "" + +msgid "Orient the text towards the camera." +msgstr "" + +#, possible-boost-format +msgid "" +"Can't load exactly same font(\"%1%\"). Aplication selected a similar " +"one(\"%2%\"). You have to specify font for enable edit text." +msgstr "" + +msgid "No symbol" +msgstr "" + +msgid "Loading" +msgstr "" + +msgid "In queue" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Height of one text line - Font Ascent +msgid "Height" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Copy surface of model on surface of the embossed text +#. TRN - Input label. Be short as possible +msgid "Use surface" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Option to change projection on curved surface +#. for each character(glyph) in text separately +msgid "Per glyph" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Align Top|Middle|Bottom and Left|Center|Right +msgid "Alignment" +msgstr "" + +#. TRN - Input label. Be short as possible +msgid "Char gap" +msgstr "" + +#. TRN - Input label. Be short as possible +msgid "Line gap" +msgstr "" + +#. TRN - Input label. Be short as possible +msgid "Boldness" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Like Font italic +msgid "Skew ratio" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Distance from model surface to be able +#. move text as part fully into not flat surface +#. move text as modifier fully out of not flat surface +#. TRN - Input label. Be short as possible +msgid "From surface" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Keep vector from bottom to top of text aligned with printer Y axis +msgid "Keep up" +msgstr "" + +#. TRN - Input label. Be short as possible. +#. Some Font file contain multiple fonts inside and +#. this is numerical selector of font inside font collections +msgid "Collection" +msgstr "" + +#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe +msgid "SVG rotate" +msgstr "" + +#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface +msgid "SVG move" +msgstr "" + +msgid "Enter SVG gizmo" +msgstr "" + +msgid "Leave SVG gizmo" +msgstr "" + +msgid "SVG actions" +msgstr "" + +msgid "SVG" +msgstr "" + +#, possible-boost-format +msgid "Opacity (%1%)" +msgstr "" + +#, possible-boost-format +msgid "Color gradient (%1%)" +msgstr "" + +msgid "Undefined fill type" +msgstr "" + +msgid "Linear gradient" +msgstr "" + +msgid "Radial gradient" +msgstr "" + +msgid "Open filled path" +msgstr "" + +msgid "Undefined stroke type" +msgstr "" + +msgid "Path can't be healed from selfintersection and multiple points." +msgstr "" + +msgid "" +"Final shape constains selfintersection or multiple points with same " +"coordinate." +msgstr "" + +#, possible-boost-format +msgid "Shape is marked as invisible (%1%)." +msgstr "" + +#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#, possible-boost-format +msgid "Fill of shape (%1%) contains unsupported: %2%." +msgstr "" + +#, possible-boost-format +msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." +msgstr "" + +#, possible-boost-format +msgid "Stroke of shape (%1%) contains unsupported: %2%." +msgstr "" + +msgid "Face the camera" +msgstr "" + +#. TRN - Preview of filename after clear local filepath. +msgid "Unknown filename" +msgstr "" + +#, possible-boost-format +msgid "SVG file path is \"%1%\"" +msgstr "" + +msgid "Reload SVG file from disk." +msgstr "" + +msgid "Change file" +msgstr "" + +msgid "Change to another .svg file" +msgstr "" + +msgid "Forget the file path" +msgstr "" + +msgid "" +"Do NOT save local path to 3MF file.\n" +"Also disables 'reload from disk' option." +msgstr "" + +#. TRN: An menu option to convert the SVG into an unmodifiable model part. +msgid "Bake" +msgstr "" + +#. TRN: Tooltip for the menu item. +msgid "Bake into model as uneditable part" +msgstr "" + +msgid "Save as" +msgstr "" + +msgid "Save SVG file" +msgstr "" + +msgid "Save as '.svg' file" +msgstr "" + +msgid "Size in emboss direction." +msgstr "" + +#. TRN: The placeholder contains a number. +#, possible-boost-format +msgid "Scale also changes amount of curve samples (%1%)" +msgstr "" + +msgid "Width of SVG." +msgstr "" + +msgid "Height of SVG." +msgstr "" + +msgid "Lock/unlock the aspect ratio of the SVG." +msgstr "" + +msgid "Reset scale" +msgstr "" + +msgid "Distance of the center of the SVG to the model surface." +msgstr "" + +msgid "Reset distance" +msgstr "" + +msgid "Reset rotation" +msgstr "" + +msgid "Lock/unlock rotation angle when dragging above the surface." +msgstr "" + +msgid "Mirror vertically" +msgstr "" + +msgid "Mirror horizontally" +msgstr "" + +#. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). +msgid "Change SVG Type" +msgstr "" + +#. TRN - Input label. Be short as possible +msgid "Mirror" +msgstr "" + +msgid "Choose SVG file for emboss:" +msgstr "" + +#, possible-boost-format +msgid "File does NOT exist (%1%)." +msgstr "" + +#, possible-boost-format +msgid "Filename has to end with \".svg\" but you selected %1%" +msgstr "" + +#, possible-boost-format +msgid "Nano SVG parser can't load from file (%1%)." +msgstr "" + +#, possible-boost-format +msgid "SVG file does NOT contain a single path to be embossed (%1%)." +msgstr "" + +msgid "Vertex" +msgstr "" + +msgid "Edge" +msgstr "" + +msgid "Plane" +msgstr "" + +msgid "Point on edge" +msgstr "" + +msgid "Point on circle" +msgstr "" + +msgid "Point on plane" +msgstr "" + +msgid "Center of edge" +msgstr "" + +msgid "Center of circle" +msgstr "" + +msgid "ShiftLeft mouse button" +msgstr "" + +msgid "Select feature" +msgstr "" + +msgid "Select point" +msgstr "" + +msgid "Delete" +msgstr "" + +msgid "Restart selection" +msgstr "" + +msgid "Esc" +msgstr "" + +msgid "Unselect" +msgstr "" + +msgid "Measure" +msgstr "" + +msgid "Edit to scale" +msgstr "" + +msgctxt "Verb" +msgid "Scale" +msgstr "" + +msgid "None" +msgstr "" + +msgid "Diameter" +msgstr "" + +msgid "Length" +msgstr "" + +msgid "Selection" +msgstr "" + +msgid "Copy to clipboard" +msgstr "" + +msgid "Perpendicular distance" +msgstr "" + +msgid "Distance" +msgstr "" + +msgid "Direct distance" +msgstr "" + +msgid "Distance XYZ" +msgstr "" + +msgid "Ctrl+" +msgstr "" + +msgid "Notice" +msgstr "" + +msgid "Undefined" +msgstr "" + +#, possible-boost-format +msgid "%1% was replaced with %2%" +msgstr "" + +msgid "The configuration may be generated by a newer version of OrcaSlicer." +msgstr "" + +msgid "Some values have been replaced. Please check them:" +msgstr "" + +msgid "Process" +msgstr "" + +msgid "Filament" +msgstr "" + +msgid "Machine" +msgstr "" + +msgid "Configuration package was loaded, but some values were not recognized." +msgstr "" + +#, possible-boost-format +msgid "" +"Configuration file \"%1%\" was loaded, but some values were not recognized." +msgstr "" + +msgid "V" +msgstr "" + +msgid "" +"OrcaSlicer will terminate because of running out of memory.It may be a bug. " +"It will be appreciated if you report the issue to our team." +msgstr "" + +msgid "Fatal error" +msgstr "" + +msgid "" +"OrcaSlicer will terminate because of a localization error. It will be " +"appreciated if you report the specific scenario this issue happened." +msgstr "" + +msgid "Critical error" +msgstr "" + +#, possible-boost-format +msgid "OrcaSlicer got an unhandled exception: %1%" +msgstr "" + +msgid "Untitled" +msgstr "" + +msgid "Downloading Bambu Network Plug-in" +msgstr "" + +msgid "Login information expired. Please login again." +msgstr "" + +msgid "Incorrect password" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Connect %s failed! [SN:%s, code=%s]" +msgstr "" + +msgid "" +"Orca Slicer requires the Microsoft WebView2 Runtime to operate certain " +"features.\n" +"Click Yes to install it now." +msgstr "" + +msgid "WebView2 Runtime" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"%s\n" +"Do you want to continue?" +msgstr "" + +msgid "Remember my choice" +msgstr "" + +msgid "Loading configuration" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Click to download new version in default browser: %s" +msgstr "" + +msgid "The Orca Slicer needs an upgrade" +msgstr "" + +msgid "This is the newest version." +msgstr "" + +msgid "Info" +msgstr "" + +msgid "" +"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" +"OrcaSlicer has attempted to recreate the configuration file.\n" +"Please note, application settings will be lost, but printer profiles will " +"not be affected." +msgstr "" + +msgid "Rebuild" +msgstr "" + +msgid "Loading current presets" +msgstr "" + +msgid "Loading a mode view" +msgstr "" + +msgid "Choose one file (3mf):" +msgstr "" + +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" +msgstr "" + +msgid "Choose one file (gcode/3mf):" +msgstr "" + +msgid "Some presets are modified." +msgstr "" + +msgid "" +"You can keep the modifield presets to the new project, discard or save " +"changes as new presets." +msgstr "" + +msgid "User logged out" +msgstr "" + +msgid "new or open project file is not allowed during the slicing process!" +msgstr "" + +msgid "Open Project" +msgstr "" + +msgid "" +"The version of Orca Slicer is too low and needs to be updated to the latest " +"version before it can be used normally" +msgstr "" + +msgid "Privacy Policy Update" +msgstr "" + +msgid "" +"The number of user presets cached in the cloud has exceeded the upper limit, " +"newly created user presets can only be used locally." +msgstr "" + +msgid "Sync user presets" +msgstr "" + +msgid "Loading user preset" +msgstr "" + +msgid "Switching application language" +msgstr "" + +msgid "Select the language" +msgstr "" + +msgid "Language" +msgstr "" + +msgid "*" +msgstr "" + +msgid "The uploads are still ongoing" +msgstr "" + +msgid "Stop them and continue anyway?" +msgstr "" + +msgid "Ongoing uploads" +msgstr "" + +msgid "Select a G-code file:" +msgstr "" + +msgid "Import File" +msgstr "" + +msgid "Choose files" +msgstr "" + +msgid "New Folder" +msgstr "" + +msgid "Open" +msgstr "" + +msgid "Rename" +msgstr "" + +msgid "Orca Slicer GUI initialization failed" +msgstr "" + +#, possible-boost-format +msgid "Fatal error, exception catched: %1%" +msgstr "" + +msgid "Quality" +msgstr "" + +msgid "Shell" +msgstr "" + +msgid "Infill" +msgstr "" + +msgid "Support" +msgstr "" + +msgid "Flush options" +msgstr "" + +msgid "Speed" +msgstr "" + +msgid "Strength" +msgstr "" + +msgid "Top Solid Layers" +msgstr "" + +msgid "Top Minimum Shell Thickness" +msgstr "" + +msgid "Bottom Solid Layers" +msgstr "" + +msgid "Bottom Minimum Shell Thickness" +msgstr "" + +msgid "Ironing" +msgstr "" + +msgid "Fuzzy Skin" +msgstr "" + +msgid "Extruders" +msgstr "" + +msgid "Extrusion Width" +msgstr "" + +msgid "Wipe options" +msgstr "" + +msgid "Bed adhension" +msgstr "" + +msgid "Add part" +msgstr "" + +msgid "Add negative part" +msgstr "" + +msgid "Add modifier" +msgstr "" + +msgid "Add support blocker" +msgstr "" + +msgid "Add support enforcer" +msgstr "" + +msgid "Add text" +msgstr "" + +msgid "Add negative text" +msgstr "" + +msgid "Add text modifier" +msgstr "" + +msgid "Add SVG part" +msgstr "" + +msgid "Add negative SVG" +msgstr "" + +msgid "Add SVG modifier" +msgstr "" + +msgid "Select settings" +msgstr "" + +msgid "Hide" +msgstr "" + +msgid "Show" +msgstr "" + +msgid "Del" +msgstr "" + +msgid "Delete the selected object" +msgstr "" + +msgid "Load..." +msgstr "" + +msgid "Cube" +msgstr "" + +msgid "Cylinder" +msgstr "" + +msgid "Cone" +msgstr "" + +msgid "Disc" +msgstr "" + +msgid "Torus" +msgstr "" + +msgid "Orca Cube" +msgstr "" + +msgid "3DBenchy" +msgstr "" + +msgid "Autodesk FDM Test" +msgstr "" + +msgid "Voron Cube" +msgstr "" + +msgid "Stanford Bunny" +msgstr "" + +msgid "Orca String Hell" +msgstr "" + +msgid "" +"This model features text embossment on the top surface. For optimal results, " +"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"for the 'Only One Wall on Top Surfaces' to work best.\n" +"Yes - Change these settings automatically\n" +"No - Do not change these settings for me" +msgstr "" + +msgid "Text" +msgstr "" + +msgid "Height range Modifier" +msgstr "" + +msgid "Add settings" +msgstr "" + +msgid "Change type" +msgstr "" + +msgid "Set as an individual object" +msgstr "" + +msgid "Set as individual objects" +msgstr "" + +msgid "Fill bed with copies" +msgstr "" + +msgid "Fill the remaining area of bed with copies of the selected object" +msgstr "" + +msgid "Printable" +msgstr "" + +msgid "Fix model" +msgstr "" + +msgid "Export as one STL" +msgstr "" + +msgid "Export as STLs" +msgstr "" + +msgid "Reload from disk" +msgstr "" + +msgid "Reload the selected parts from disk" +msgstr "" + +msgid "Replace with STL" +msgstr "" + +msgid "Replace the selected part with new STL" +msgstr "" + +msgid "Change filament" +msgstr "" + +msgid "Set filament for selected items" +msgstr "" + +msgid "Default" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Filament %d" +msgstr "" + +msgid "active" +msgstr "" + +msgid "Scale to build volume" +msgstr "" + +msgid "Scale an object to fit the build volume" +msgstr "" + +msgid "Flush Options" +msgstr "" + +msgid "Flush into objects' infill" +msgstr "" + +msgid "Flush into this object" +msgstr "" + +msgid "Flush into objects' support" +msgstr "" + +msgid "Edit in Parameter Table" +msgstr "" + +msgid "Convert from inch" +msgstr "" + +msgid "Restore to inch" +msgstr "" + +msgid "Convert from meter" +msgstr "" + +msgid "Restore to meter" +msgstr "" + +msgid "Assemble" +msgstr "" + +msgid "Assemble the selected objects to an object with multiple parts" +msgstr "" + +msgid "Assemble the selected objects to an object with single part" +msgstr "" + +msgid "Mesh boolean" +msgstr "" + +msgid "Mesh boolean operations including union and subtraction" +msgstr "" + +msgid "Along X axis" +msgstr "" + +msgid "Mirror along the X axis" +msgstr "" + +msgid "Along Y axis" +msgstr "" + +msgid "Mirror along the Y axis" +msgstr "" + +msgid "Along Z axis" +msgstr "" + +msgid "Mirror along the Z axis" +msgstr "" + +msgid "Mirror object" +msgstr "" + +msgid "Edit text" +msgstr "" + +msgid "Ability to change text, font, size, ..." +msgstr "" + +msgid "Edit SVG" +msgstr "" + +msgid "Change SVG source file, projection, size, ..." +msgstr "" + +msgid "Invalidate cut info" +msgstr "" + +msgid "Add Primitive" +msgstr "" + +msgid "Add Handy models" +msgstr "" + +msgid "Show Labels" +msgstr "" + +msgid "To objects" +msgstr "" + +msgid "Split the selected object into multiple objects" +msgstr "" + +msgid "To parts" +msgstr "" + +msgid "Split the selected object into multiple parts" +msgstr "" + +msgid "Split" +msgstr "" + +msgid "Split the selected object" +msgstr "" + +msgid "Auto orientation" +msgstr "" + +msgid "Auto orient the object to improve print quality." +msgstr "" + +msgid "Split the selected object into mutiple objects" +msgstr "" + +msgid "Split the selected object into mutiple parts" +msgstr "" + +msgid "Select All" +msgstr "" + +msgid "select all objects on current plate" +msgstr "" + +msgid "Delete All" +msgstr "" + +msgid "delete all objects on current plate" +msgstr "" + +msgid "Arrange" +msgstr "" + +msgid "arrange current plate" +msgstr "" + +msgid "Auto Rotate" +msgstr "" + +msgid "auto rotate current plate" +msgstr "" + +msgid "Delete Plate" +msgstr "" + +msgid "Remove the selected plate" +msgstr "" + +msgid "Clone" +msgstr "" + +msgid "Simplify Model" +msgstr "" + +msgid "Center" +msgstr "" + +msgid "Edit Process Settings" +msgstr "" + +msgid "Edit print parameters for a single object" +msgstr "" + +msgid "Change Filament" +msgstr "" + +msgid "Set Filament for selected items" +msgstr "" + +msgid "current" +msgstr "" + +msgid "Unlock" +msgstr "" + +msgid "Lock" +msgstr "" + +msgid "Edit Plate Name" +msgstr "" + +msgid "Name" +msgstr "" + +msgid "Fila." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%1$d error repaired" +msgid_plural "%1$d errors repaired" +msgstr[0] "" +msgstr[1] "" + +#, possible-c-format, possible-boost-format +msgid "Error: %1$d non-manifold edge." +msgid_plural "Error: %1$d non-manifold edges." +msgstr[0] "" +msgstr[1] "" + +msgid "Remaining errors" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%1$d non-manifold edge" +msgid_plural "%1$d non-manifold edges" +msgstr[0] "" +msgstr[1] "" + +msgid "Right click the icon to fix model object" +msgstr "" + +msgid "Right button click the icon to drop the object settings" +msgstr "" + +msgid "Click the icon to reset all settings of the object" +msgstr "" + +msgid "Right button click the icon to drop the object printable property" +msgstr "" + +msgid "Click the icon to toggle printable property of the object" +msgstr "" + +msgid "Click the icon to edit support painting of the object" +msgstr "" + +msgid "Click the icon to edit color painting of the object" +msgstr "" + +msgid "Click the icon to shift this object to the bed" +msgstr "" + +msgid "Loading file" +msgstr "" + +msgid "Error!" +msgstr "" + +msgid "Failed to get the model data in the current file." +msgstr "" + +msgid "Generic" +msgstr "" + +msgid "Add Modifier" +msgstr "" + +msgid "Switch to per-object setting mode to edit modifier settings." +msgstr "" + +msgid "" +"Switch to per-object setting mode to edit process settings of selected " +"objects." +msgstr "" + +msgid "Delete connector from object which is a part of cut" +msgstr "" + +msgid "Delete solid part from object which is a part of cut" +msgstr "" + +msgid "Delete negative volume from object which is a part of cut" +msgstr "" + +msgid "" +"To save cut correspondence you can delete all connectors from all related " +"objects." +msgstr "" + +msgid "" +"This action will break a cut correspondence.\n" +"After that model consistency can't be guaranteed .\n" +"\n" +"To manipulate with solid parts or negative volumes you have to invalidate " +"cut infornation first." +msgstr "" + +msgid "Delete all connectors" +msgstr "" + +msgid "Deleting the last solid part is not allowed." +msgstr "" + +msgid "The target object contains only one part and can not be splited." +msgstr "" + +msgid "Assembly" +msgstr "" + +msgid "Cut Connectors information" +msgstr "" + +msgid "Object manipulation" +msgstr "" + +msgid "Group manipulation" +msgstr "" + +msgid "Object Settings to modify" +msgstr "" + +msgid "Part Settings to modify" +msgstr "" + +msgid "Layer range Settings to modify" +msgstr "" + +msgid "Part manipulation" +msgstr "" + +msgid "Instance manipulation" +msgstr "" + +msgid "Height ranges" +msgstr "" + +msgid "Settings for height range" +msgstr "" + +msgid "Layer" +msgstr "" + +msgid "Selection conflicts" +msgstr "" + +msgid "" +"If first selected item is an object, the second one should also be object." +msgstr "" + +msgid "" +"If first selected item is a part, the second one should be part in the same " +"object." +msgstr "" + +msgid "The type of the last solid object part is not to be changed." +msgstr "" + +msgid "Negative Part" +msgstr "" + +msgid "Support Blocker" +msgstr "" + +msgid "Support Enforcer" +msgstr "" + +msgid "Type:" +msgstr "" + +msgid "Choose part type" +msgstr "" + +msgid "Enter new name" +msgstr "" + +msgid "Renaming" +msgstr "" + +msgid "Following model object has been repaired" +msgid_plural "Following model objects have been repaired" +msgstr[0] "" +msgstr[1] "" + +msgid "Failed to repair folowing model object" +msgid_plural "Failed to repair folowing model objects" +msgstr[0] "" +msgstr[1] "" + +msgid "Repairing was canceled" +msgstr "" + +msgid "Additional process preset" +msgstr "" + +msgid "Remove parameter" +msgstr "" + +msgid "to" +msgstr "" + +msgid "Remove height range" +msgstr "" + +msgid "Add height range" +msgstr "" + +msgid "Invalid numeric." +msgstr "" + +msgid "one cell can only be copied to one or multiple cells in the same column" +msgstr "" + +msgid "multiple cells copy is not supported" +msgstr "" + +msgid "Outside" +msgstr "" + +msgid "Layer height" +msgstr "" + +msgid "Wall loops" +msgstr "" + +msgid "Infill density(%)" +msgstr "" + +msgid "Auto Brim" +msgstr "" + +msgid "Mouse ear" +msgstr "" + +msgid "Outer brim only" +msgstr "" + +msgid "Inner brim only" +msgstr "" + +msgid "Outer and inner brim" +msgstr "" + +msgid "No-brim" +msgstr "" + +msgid "Outer wall speed" +msgstr "" + +msgid "Plate" +msgstr "" + +msgid "Brim" +msgstr "" + +msgid "Object/Part Setting" +msgstr "" + +msgid "Reset parameter" +msgstr "" + +msgid "Multicolor Print" +msgstr "" + +msgid "Line Type" +msgstr "" + +msgid "More" +msgstr "" + +msgid "Open Preferences." +msgstr "" + +msgid "Open next tip." +msgstr "" + +msgid "Open Documentation in web browser." +msgstr "" + +msgid "Color" +msgstr "" + +msgid "Pause" +msgstr "" + +msgid "Template" +msgstr "" + +msgid "Custom" +msgstr "" + +msgid "Pause:" +msgstr "" + +msgid "Custom Template:" +msgstr "" + +msgid "Custom G-code:" +msgstr "" + +msgid "Custom G-code" +msgstr "" + +msgid "Enter Custom G-code used on current layer:" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + +msgid "Jump to layer" +msgstr "" + +msgid "Please enter the layer number" +msgstr "" + +msgid "Add Pause" +msgstr "" + +msgid "Insert a pause command at the beginning of this layer." +msgstr "" + +msgid "Add Custom G-code" +msgstr "" + +msgid "Insert custom G-code at the beginning of this layer." +msgstr "" + +msgid "Add Custom Template" +msgstr "" + +msgid "Insert template custom G-code at the beginning of this layer." +msgstr "" + +msgid "Filament " +msgstr "" + +msgid "Change filament at the beginning of this layer." +msgstr "" + +msgid "Delete Pause" +msgstr "" + +msgid "Delete Custom Template" +msgstr "" + +msgid "Edit Custom G-code" +msgstr "" + +msgid "Delete Custom G-code" +msgstr "" + +msgid "Delete Filament Change" +msgstr "" + +msgid "No printer" +msgstr "" + +msgid "..." +msgstr "" + +msgid "Failed to connect to the server" +msgstr "" + +msgid "Check the status of current system services" +msgstr "" + +msgid "code" +msgstr "" + +msgid "Failed to connect to cloud service" +msgstr "" + +msgid "Please click on the hyperlink above to view the cloud service status" +msgstr "" + +msgid "Failed to connect to the printer" +msgstr "" + +msgid "Connection to printer failed" +msgstr "" + +msgid "Please check the network connection of the printer and Studio." +msgstr "" + +msgid "Connecting..." +msgstr "" + +msgid "?" +msgstr "" + +msgid "/" +msgstr "" + +msgid "Empty" +msgstr "" + +msgid "AMS" +msgstr "" + +msgid "Auto Refill" +msgstr "" + +msgid "AMS not connected" +msgstr "" + +msgid "Load Filament" +msgstr "" + +msgid "Unload Filament" +msgstr "" + +msgid "Ext Spool" +msgstr "" + +msgid "Tips" +msgstr "" + +msgid "Guide" +msgstr "" + +msgid "Retry" +msgstr "" + +msgid "Calibrating AMS..." +msgstr "" + +msgid "A problem occured during calibration. Click to view the solution." +msgstr "" + +msgid "Calibrate again" +msgstr "" + +msgid "Cancel calibration" +msgstr "" + +msgid "Idling..." +msgstr "" + +msgid "Heat the nozzle" +msgstr "" + +msgid "Cut filament" +msgstr "" + +msgid "Pull back current filament" +msgstr "" + +msgid "Push new filament into extruder" +msgstr "" + +msgid "Purge old filament" +msgstr "" + +msgid "Feed Filament" +msgstr "" + +msgid "Confirm extruded" +msgstr "" + +msgid "Check filament location" +msgstr "" + +msgid "Grab new filament" +msgstr "" + +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filiament." +msgstr "" + +msgid "Edit" +msgstr "" + +msgid "" +"All the selected objects are on the locked plate,\n" +"We can not do auto-arrange on these objects." +msgstr "" + +msgid "No arrangable objects are selected." +msgstr "" + +msgid "" +"This plate is locked,\n" +"We can not do auto-arrange on this plate." +msgstr "" + +msgid "Arranging..." +msgstr "" + +msgid "Arranging" +msgstr "" + +msgid "Arranging canceled." +msgstr "" + +msgid "" +"Arranging is done but there are unpacked items. Reduce spacing and try again." +msgstr "" + +msgid "Arranging done." +msgstr "" + +msgid "" +"Arrange failed. Found some exceptions when processing object geometries." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Arrangement ignored the following objects which can't fit into a single " +"bed:\n" +"%s" +msgstr "" + +msgid "" +"All the selected objects are on the locked plate,\n" +"We can not do auto-orient on these objects." +msgstr "" + +msgid "" +"This plate is locked,\n" +"We can not do auto-orient on this plate." +msgstr "" + +msgid "Orienting..." +msgstr "" + +msgid "Orienting" +msgstr "" + +msgid "Orienting canceled." +msgstr "" + +msgid "Filling" +msgstr "" + +msgid "Bed filling canceled." +msgstr "" + +msgid "Bed filling done." +msgstr "" + +msgid "Searching for optimal orientation" +msgstr "" + +msgid "Orientation search canceled." +msgstr "" + +msgid "Orientation found." +msgstr "" + +msgid "Logging in" +msgstr "" + +msgid "Login failed" +msgstr "" + +msgid "Please check the printer network connection." +msgstr "" + +msgid "Abnormal print file data. Please slice again." +msgstr "" + +msgid "Task canceled." +msgstr "" + +msgid "Upload task timed out. Please check the network status and try again." +msgstr "" + +msgid "Cloud service connection failed. Please try again." +msgstr "" + +msgid "Print file not found. please slice again." +msgstr "" + +msgid "" +"The print file exceeds the maximum allowable size (1GB). Please simplify the " +"model and slice again." +msgstr "" + +msgid "Failed to send the print job. Please try again." +msgstr "" + +msgid "Failed to upload file to ftp. Please try again." +msgstr "" + +msgid "" +"Check the current status of the bambu server by clicking on the link above." +msgstr "" + +msgid "" +"The size of the print file is too large. Please adjust the file size and try " +"again." +msgstr "" + +msgid "Print file not found, Please slice it again and send it for printing." +msgstr "" + +msgid "" +"Failed to upload print file to FTP. Please check the network status and try " +"again." +msgstr "" + +msgid "Sending print job over LAN" +msgstr "" + +msgid "Sending print job through cloud service" +msgstr "" + +msgid "Print task sending times out." +msgstr "" + +msgid "Service Unavailable" +msgstr "" + +msgid "Unkown Error." +msgstr "" + +msgid "Sending print configuration" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Successfully sent. Will automatically jump to the device page in %ss" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Successfully sent. Will automatically jump to the next page in %ss" +msgstr "" + +msgid "An SD card needs to be inserted before printing via LAN." +msgstr "" + +msgid "Sending gcode file over LAN" +msgstr "" + +msgid "Sending gcode file to sdcard" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Successfully sent. Close current page in %s s" +msgstr "" + +msgid "An SD card needs to be inserted before sending to printer." +msgstr "" + +msgid "Importing SLA archive" +msgstr "" + +msgid "" +"The SLA archive doesn't contain any presets. Please activate some SLA " +"printer preset first before importing that SLA archive." +msgstr "" + +msgid "Importing canceled." +msgstr "" + +msgid "Importing done." +msgstr "" + +msgid "" +"The imported SLA archive did not contain any presets. The current SLA " +"presets were used as fallback." +msgstr "" + +msgid "You cannot load SLA project with a multi-part object on the bed" +msgstr "" + +msgid "Please check your object list before preset changing." +msgstr "" + +msgid "Attention!" +msgstr "" + +msgid "Downloading" +msgstr "" + +msgid "Download failed" +msgstr "" + +msgid "Cancelled" +msgstr "" + +msgid "Install successfully." +msgstr "" + +msgid "Installing" +msgstr "" + +msgid "Install failed" +msgstr "" + +msgid "Portions copyright" +msgstr "" + +msgid "Copyright" +msgstr "" + +msgid "License" +msgstr "" + +msgid "Orca Slicer is licensed under " +msgstr "" + +msgid "GNU Affero General Public License, version 3" +msgstr "" + +msgid "" +"Orca Slicer is based on BambuStudio by Bambulab, which is from PrusaSlicer " +"by Prusa Research. PrusaSlicer is from Slic3r by Alessandro Ranellucci and " +"the RepRap community" +msgstr "" + +msgid "Libraries" +msgstr "" + +msgid "" +"This software uses open source components whose copyright and other " +"proprietary rights belong to their respective owners" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "About %s" +msgstr "" + +msgid "Orca Slicer " +msgstr "" + +msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." +msgstr "" + +msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." +msgstr "" + +msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." +msgstr "" + +msgid "" +"Slic3r was created by Alessandro Ranellucci with the help of many other " +"contributors." +msgstr "" + +msgid "Version" +msgstr "" + +msgid "AMS Materials Setting" +msgstr "" + +msgid "Confirm" +msgstr "" + +msgid "Close" +msgstr "" + +msgid "Colour" +msgstr "" + +msgid "" +"Nozzle\n" +"Temperature" +msgstr "" + +msgid "max" +msgstr "" + +msgid "min" +msgstr "" + +#, possible-boost-format +msgid "The input value should be greater than %1% and less than %2%" +msgstr "" + +msgid "SN" +msgstr "" + +msgid "Setting AMS slot information while printing is not supported" +msgstr "" + +msgid "Factors of Flow Dynamics Calibration" +msgstr "" + +msgid "PA Profile" +msgstr "" + +msgid "Factor K" +msgstr "" + +msgid "Factor N" +msgstr "" + +msgid "Setting Virtual slot information while printing is not supported" +msgstr "" + +msgid "Are you sure you want to clear the filament information?" +msgstr "" + +msgid "You need to select the material type and color first." +msgstr "" + +msgid "Please input a valid value (K in 0~0.3)" +msgstr "" + +msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" +msgstr "" + +msgid "Other Color" +msgstr "" + +msgid "Custom Color" +msgstr "" + +msgid "Dynamic flow calibration" +msgstr "" + +msgid "" +"The nozzle temp and max volumetric speed will affect the calibration " +"results. Please fill in the same values as the actual printing. They can be " +"auto-filled by selecting a filament preset." +msgstr "" + +msgid "Nozzle Diameter" +msgstr "" + +msgid "Bed Type" +msgstr "" + +msgid "Nozzle temperature" +msgstr "" + +msgid "Bed Temperature" +msgstr "" + +msgid "Max volumetric speed" +msgstr "" + +msgid "℃" +msgstr "" + +msgid "Bed temperature" +msgstr "" + +msgid "mm³" +msgstr "" + +msgid "Start calibration" +msgstr "" + +msgid "Next" +msgstr "" + +msgid "" +"Calibration completed. Please find the most uniform extrusion line on your " +"hot bed like the picture below, and fill the value on its left side into the " +"factor K input box." +msgstr "" + +msgid "Save" +msgstr "" + +msgid "Last Step" +msgstr "" + +msgid "Example" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Calibrating... %d%%" +msgstr "" + +msgid "Calibration completed" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s does not support %s" +msgstr "" + +msgid "Dynamic flow Calibration" +msgstr "" + +msgid "Step" +msgstr "" + +msgid "AMS Slots" +msgstr "" + +msgid "" +"Note: Only the AMS slots loaded with the same material type can be selected." +msgstr "" + +msgid "Enable AMS" +msgstr "" + +msgid "Print with filaments in the AMS" +msgstr "" + +msgid "Disable AMS" +msgstr "" + +msgid "Print with the filament mounted on the back of chassis" +msgstr "" + +msgid "Cabin humidity" +msgstr "" + +msgid "" +"Green means that AMS humidity is normal, orange represent humidity is high, " +"red represent humidity is too high.(Hygrometer: lower the better.)" +msgstr "" + +msgid "Desiccant status" +msgstr "" + +msgid "" +"A desiccant status lower than two bars indicates that desiccant may be " +"inactive. Please change the desiccant.(The bars: higher the better.)" +msgstr "" + +msgid "" +"Note: When the lid is open or the desiccant pack is changed, it can take " +"hours or a night to absorb the moisture. Low temperatures also slow down the " +"process. During this time, the indicator may not represent the chamber " +"accurately." +msgstr "" + +msgid "" +"Config which AMS slot should be used for a filament used in the print job" +msgstr "" + +msgid "Filament used in this print job" +msgstr "" + +msgid "AMS slot used for this filament" +msgstr "" + +msgid "Click to select AMS slot manually" +msgstr "" + +msgid "Do not Enable AMS" +msgstr "" + +msgid "Print using materials mounted on the back of the case" +msgstr "" + +msgid "Print with filaments in ams" +msgstr "" + +msgid "Print with filaments mounted on the back of the chassis" +msgstr "" + +msgid "" +"When the current material run out, the printer will continue to print in the " +"following order." +msgstr "" + +msgid "Group" +msgstr "" + +msgid "The printer does not currently support auto refill." +msgstr "" + +msgid "" +"AMS filament backup is not enabled, please enable it in the AMS settings." +msgstr "" + +msgid "" +"If there are two identical filaments in AMS, AMS filament backup will be " +"enabled. \n" +"(Currently supporting automatic supply of consumables with the same brand, " +"material type, and color)" +msgstr "" + +msgid "AMS Settings" +msgstr "" + +msgid "Insertion update" +msgstr "" + +msgid "" +"The AMS will automatically read the filament information when inserting a " +"new Bambu Lab filament. This takes about 20 seconds." +msgstr "" + +msgid "" +"Note: if new filament is inserted during printing, the AMS will not " +"automatically read any information until printing is completed." +msgstr "" + +msgid "" +"When inserting a new filament, the AMS will not automatically read its " +"information, leaving it blank for you to enter manually." +msgstr "" + +msgid "Power on update" +msgstr "" + +msgid "" +"The AMS will automatically read the information of inserted filament on " +"start-up. It will take about 1 minute.The reading process will roll filament " +"spools." +msgstr "" + +msgid "" +"The AMS will not automatically read information from inserted filament " +"during startup and will continue to use the information recorded before the " +"last shutdown." +msgstr "" + +msgid "Update remaining capacity" +msgstr "" + +msgid "" +"The AMS will estimate Bambu filament's remaining capacity after the filament " +"info is updated. During printing, remaining capacity will be updated " +"automatically." +msgstr "" + +msgid "AMS filament backup" +msgstr "" + +msgid "" +"AMS will continue to another spool with the same properties of filament " +"automatically when current filament runs out" +msgstr "" + +msgid "File" +msgstr "" + +msgid "Calibration" +msgstr "" + +msgid "" +"Failed to download the plug-in. Please check your firewall settings and vpn " +"software, check and retry." +msgstr "" + +msgid "" +"Failed to install the plug-in. Please check whether it is blocked or deleted " +"by anti-virus software." +msgstr "" + +msgid "click here to see more info" +msgstr "" + +msgid "Please home all axes (click " +msgstr "" + +msgid "" +") to locate the toolhead's position. This prevents device moving beyond the " +"printable boundary and causing equipment wear." +msgstr "" + +msgid "Go Home" +msgstr "" + +msgid "" +"A error occurred. Maybe memory of system is not enough or it's a bug of the " +"program" +msgstr "" + +msgid "Please save project and restart the program. " +msgstr "" + +msgid "Processing G-Code from Previous file..." +msgstr "" + +msgid "Slicing complete" +msgstr "" + +msgid "Access violation" +msgstr "" + +msgid "Illegal instruction" +msgstr "" + +msgid "Divide by zero" +msgstr "" + +msgid "Overflow" +msgstr "" + +msgid "Underflow" +msgstr "" + +msgid "Floating reserved operand" +msgstr "" + +msgid "Stack overflow" +msgstr "" + +msgid "Unknown error when export G-code." +msgstr "" + +#, possible-boost-format +msgid "" +"Failed to save gcode file.\n" +"Error message: %1%.\n" +"Source file %2%." +msgstr "" + +#, possible-boost-format +msgid "Succeed to export G-code to %1%" +msgstr "" + +msgid "Running post-processing scripts" +msgstr "" + +msgid "Copying of the temporary G-code to the output G-code failed" +msgstr "" + +#, possible-boost-format +msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" +msgstr "" + +msgid "Origin" +msgstr "" + +msgid "Size in X and Y of the rectangular plate." +msgstr "" + +msgid "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." +msgstr "" + +msgid "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." +msgstr "" + +msgid "Rectangular" +msgstr "" + +msgid "Circular" +msgstr "" + +msgid "Load shape from STL..." +msgstr "" + +msgid "Settings" +msgstr "" + +msgid "Texture" +msgstr "" + +msgid "Remove" +msgstr "" + +msgid "Not found:" +msgstr "" + +msgid "Model" +msgstr "" + +msgid "Choose an STL file to import bed shape from:" +msgstr "" + +msgid "Invalid file format." +msgstr "" + +msgid "Error! Invalid model" +msgstr "" + +msgid "The selected file contains no geometry." +msgstr "" + +msgid "" +"The selected file contains several disjoint areas. This is not supported." +msgstr "" + +msgid "Choose a file to import bed texture from (PNG/SVG):" +msgstr "" + +msgid "Choose an STL file to import bed model from:" +msgstr "" + +msgid "Bed Shape" +msgstr "" + +msgid "" +"Nozzle may be blocked when the temperature is out of recommended range.\n" +"Please make sure whether to use the temperature to print.\n" +"\n" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Recommended nozzle temperature of this filament type is [%d, %d] degree " +"centigrade" +msgstr "" + +msgid "" +"Too small max volumetric speed.\n" +"Reset to 0.5" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" +msgstr "" + +msgid "" +"Too small layer height.\n" +"Reset to 0.2" +msgstr "" + +msgid "" +"Too small ironing spacing.\n" +"Reset to 0.1" +msgstr "" + +msgid "" +"Zero initial layer height is invalid.\n" +"\n" +"The first layer height will be reset to 0.2." +msgstr "" + +msgid "" +"This setting is only used for model size tunning with small value in some " +"cases.\n" +"For example, when model size has small error and hard to be assembled.\n" +"For large size tuning, please use model scale function.\n" +"\n" +"The value will be reset to 0." +msgstr "" + +msgid "" +"Too large elefant foot compensation is unreasonable.\n" +"If really have serious elephant foot effect, please check other settings.\n" +"For example, whether bed temperature is too high.\n" +"\n" +"The value will be reset to 0." +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, top shell " +"layers is 0, sparse infill density is 0 and timelapse type is traditional." +msgstr "" + +msgid " But machines with I3 structure will not generate timelapse videos." +msgstr "" + +msgid "" +"Change these settings automatically? \n" +"Yes - Change these settings and enable spiral mode automatically\n" +"No - Give up using spiral mode this time" +msgstr "" + +msgid "" +"Alternate extra wall only works with ensure vertical shell thickness " +"disabled. " +msgstr "" + +msgid "" +"Change these settings automatically? \n" +"Yes - Disable ensure vertical shell thickness and enable alternate extra " +"wall\n" +"No - Dont use alternate extra wall" +msgstr "" + +msgid "" +"Prime tower does not work when Adaptive Layer Height or Independent Support " +"Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Adaptive Layer Height and Independent Support Layer Height" +msgstr "" + +msgid "" +"Prime tower does not work when Adaptive Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Adaptive Layer Height" +msgstr "" + +msgid "" +"Prime tower does not work when Independent Support Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Independent Support Layer Height" +msgstr "" + +msgid "" +"While printing by Object, the extruder may collide skirt.\n" +"Thus, reset the skirt layer to 1 to avoid that." +msgstr "" + +msgid "Auto bed leveling" +msgstr "" + +msgid "Heatbed preheating" +msgstr "" + +msgid "Sweeping XY mech mode" +msgstr "" + +msgid "Changing filament" +msgstr "" + +msgid "M400 pause" +msgstr "" + +msgid "Paused due to filament runout" +msgstr "" + +msgid "Heating hotend" +msgstr "" + +msgid "Calibrating extrusion" +msgstr "" + +msgid "Scanning bed surface" +msgstr "" + +msgid "Inspecting first layer" +msgstr "" + +msgid "Identifying build plate type" +msgstr "" + +msgid "Calibrating Micro Lidar" +msgstr "" + +msgid "Homing toolhead" +msgstr "" + +msgid "Cleaning nozzle tip" +msgstr "" + +msgid "Checking extruder temperature" +msgstr "" + +msgid "Printing was paused by the user" +msgstr "" + +msgid "Pause of front cover falling" +msgstr "" + +msgid "Calibrating the micro lida" +msgstr "" + +msgid "Calibrating extrusion flow" +msgstr "" + +msgid "Paused due to nozzle temperature malfunction" +msgstr "" + +msgid "Paused due to heat bed temperature malfunction" +msgstr "" + +msgid "Filament unloading" +msgstr "" + +msgid "Skip step pause" +msgstr "" + +msgid "Filament loading" +msgstr "" + +msgid "Motor noise calibration" +msgstr "" + +msgid "Paused due to AMS lost" +msgstr "" + +msgid "Paused due to low speed of the heat break fan" +msgstr "" + +msgid "Paused due to chamber temperature control error" +msgstr "" + +msgid "Cooling chamber" +msgstr "" + +msgid "Paused by the Gcode inserted by user" +msgstr "" + +msgid "Motor noise showoff" +msgstr "" + +msgid "Nozzle filament covered detected pause" +msgstr "" + +msgid "Cutter error pause" +msgstr "" + +msgid "First layer error pause" +msgstr "" + +msgid "Nozzle clog pause" +msgstr "" + +msgid "MC" +msgstr "" + +msgid "MainBoard" +msgstr "" + +msgid "TH" +msgstr "" + +msgid "XCam" +msgstr "" + +msgid "Unknown" +msgstr "" + +msgid "Fatal" +msgstr "" + +msgid "Serious" +msgstr "" + +msgid "Common" +msgstr "" + +msgid "Update successful." +msgstr "" + +msgid "Downloading failed." +msgstr "" + +msgid "Verification failed." +msgstr "" + +msgid "Update failed." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + +msgid "" +"When you set the chamber temperature below 40℃, the chamber temperature " +"control will not be activated. And the target chamber temperature will " +"automatically be set to 0℃." +msgstr "" + +msgid "Failed to start printing job" +msgstr "" + +msgid "" +"This calibration does not support the currently selected nozzle diameter" +msgstr "" + +msgid "Current flowrate cali param is invalid" +msgstr "" + +msgid "Selected diameter and machine diameter do not match" +msgstr "" + +msgid "Failed to generate cali gcode" +msgstr "" + +msgid "Calibration error" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "" + +msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +msgstr "" + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS,please take care to " +"dry it before use." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" + +msgid "default" +msgstr "" + +#, possible-boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, possible-boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "" + +msgid "Print settings" +msgstr "" + +msgid "Filament settings" +msgstr "" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "" + +msgid "parameter name" +msgstr "" + +msgid "N/A" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s can't be percentage" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Value %s is out of range, continue?" +msgstr "" + +msgid "Parameter validation" +msgstr "" + +msgid "Value is out of range." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Is it %s%% or %s %s?\n" +"YES for %s%%, \n" +"NO for %s %s." +msgstr "" + +#, possible-boost-format +msgid "Invalid format. Expected vector format: \"%1%\"" +msgstr "" + +msgid "Layer Height" +msgstr "" + +msgid "Line Width" +msgstr "" + +msgid "Fan Speed" +msgstr "" + +msgid "Temperature" +msgstr "" + +msgid "Flow" +msgstr "" + +msgid "Tool" +msgstr "" + +msgid "Layer Time" +msgstr "" + +msgid "Layer Time (log)" +msgstr "" + +msgid "Height: " +msgstr "" + +msgid "Width: " +msgstr "" + +msgid "Speed: " +msgstr "" + +msgid "Flow: " +msgstr "" + +msgid "Layer Time: " +msgstr "" + +msgid "Fan: " +msgstr "" + +msgid "Temperature: " +msgstr "" + +msgid "Loading G-codes" +msgstr "" + +msgid "Generating geometry vertex data" +msgstr "" + +msgid "Generating geometry index data" +msgstr "" + +msgid "Statistics of All Plates" +msgstr "" + +msgid "Display" +msgstr "" + +msgid "Flushed" +msgstr "" + +msgid "Total" +msgstr "" + +msgid "Tower" +msgstr "" + +msgid "Total Estimation" +msgstr "" + +msgid "Total time" +msgstr "" + +msgid "Total cost" +msgstr "" + +msgid "up to" +msgstr "" + +msgid "above" +msgstr "" + +msgid "from" +msgstr "" + +msgid "Color Scheme" +msgstr "" + +msgid "Time" +msgstr "" + +msgid "Percent" +msgstr "" + +msgid "Used filament" +msgstr "" + +msgid "Layer Height (mm)" +msgstr "" + +msgid "Line Width (mm)" +msgstr "" + +msgid "Speed (mm/s)" +msgstr "" + +msgid "Fan Speed (%)" +msgstr "" + +msgid "Temperature (°C)" +msgstr "" + +msgid "Volumetric flow rate (mm³/s)" +msgstr "" + +msgid "Travel" +msgstr "" + +msgid "Seams" +msgstr "" + +msgid "Retract" +msgstr "" + +msgid "Unretract" +msgstr "" + +msgid "Filament Changes" +msgstr "" + +msgid "Wipe" +msgstr "" + +msgid "Options" +msgstr "" + +msgid "travel" +msgstr "" + +msgid "Extruder" +msgstr "" + +msgid "Filament change times" +msgstr "" + +msgid "Cost" +msgstr "" + +msgid "Color change" +msgstr "" + +msgid "Print" +msgstr "" + +msgid "Printer" +msgstr "" + +msgid "Custom g-code" +msgstr "" + +msgid "ToolChange" +msgstr "" + +msgid "Time Estimation" +msgstr "" + +msgid "Normal mode" +msgstr "" + +msgid "Prepare time" +msgstr "" + +msgid "Model printing time" +msgstr "" + +msgid "Switch to silent mode" +msgstr "" + +msgid "Switch to normal mode" +msgstr "" + +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + +msgid "Sequence" +msgstr "" + +msgid "Mirror Object" +msgstr "" + +msgid "Tool Move" +msgstr "" + +msgid "Tool Rotate" +msgstr "" + +msgid "Move Object" +msgstr "" + +msgid "Auto Orientation options" +msgstr "" + +msgid "Enable rotation" +msgstr "" + +msgid "Optimize support interface area" +msgstr "" + +msgid "Orient" +msgstr "" + +msgid "Arrange options" +msgstr "" + +msgid "Spacing" +msgstr "" + +msgid "Auto rotate for arrangement" +msgstr "" + +msgid "Allow multiple materials on same plate" +msgstr "" + +msgid "Avoid extrusion calibration region" +msgstr "" + +msgid "Align to Y axis" +msgstr "" + +msgid "Add" +msgstr "" + +msgid "Add plate" +msgstr "" + +msgid "Auto orient" +msgstr "" + +msgid "Arrange all objects" +msgstr "" + +msgid "Arrange objects on selected plates" +msgstr "" + +msgid "Split to objects" +msgstr "" + +msgid "Split to parts" +msgstr "" + +msgid "Assembly View" +msgstr "" + +msgid "Select Plate" +msgstr "" + +msgid "Assembly Return" +msgstr "" + +msgid "return" +msgstr "" + +msgid "Paint Toolbar" +msgstr "" + +msgid "Explosion Ratio" +msgstr "" + +msgid "Section View" +msgstr "" + +msgid "Assemble Control" +msgstr "" + +msgid "Total Volume:" +msgstr "" + +msgid "Assembly Info" +msgstr "" + +msgid "Volume:" +msgstr "" + +msgid "Size:" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"separate the conflicted objects farther (%s <-> %s)." +msgstr "" + +msgid "An object is layed over the boundary of plate." +msgstr "" + +msgid "A G-code path goes beyond the max print height." +msgstr "" + +msgid "A G-code path goes beyond the boundary of plate." +msgstr "" + +msgid "Only the object being edit is visible." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + +msgid "Calibration step selection" +msgstr "" + +msgid "Micro lidar calibration" +msgstr "" + +msgid "Bed leveling" +msgstr "" + +msgid "Vibration compensation" +msgstr "" + +msgid "Motor noise cancellation" +msgstr "" + +msgid "Calibration program" +msgstr "" + +msgid "" +"The calibration program detects the status of your device automatically to " +"minimize deviation.\n" +"It keeps the device performing optimally." +msgstr "" + +msgid "Calibration Flow" +msgstr "" + +msgid "Start Calibration" +msgstr "" + +msgid "Completed" +msgstr "" + +msgid "Calibrating" +msgstr "" + +msgid "No step selected" +msgstr "" + +msgid "Auto-record Monitoring" +msgstr "" + +msgid "Go Live" +msgstr "" + +msgid "Resolution" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Hostname or IP" +msgstr "" + +msgid "Custom camera source" +msgstr "" + +msgid "Show \"Live Video\" guide page." +msgstr "" + +msgid "720p" +msgstr "" + +msgid "1080p" +msgstr "" + +msgid "ConnectPrinter(LAN)" +msgstr "" + +msgid "Please input the printer access code:" +msgstr "" + +msgid "" +"You can find it in \"Settings > Network > Connection code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "Invalid input." +msgstr "" + +msgid "New Window" +msgstr "" + +msgid "Open a new window" +msgstr "" + +msgid "Application is closing" +msgstr "" + +msgid "Closing Application while some presets are modified." +msgstr "" + +msgid "Logging" +msgstr "" + +msgid "Prepare" +msgstr "" + +msgid "Preview" +msgstr "" + +msgid "Device" +msgstr "" + +msgid "Project" +msgstr "" + +msgid "Yes" +msgstr "" + +msgid "No" +msgstr "" + +msgid "will be closed before creating a new model. Do you want to continue?" +msgstr "" + +msgid "Slice plate" +msgstr "" + +msgid "Print plate" +msgstr "" + +msgid "Slice all" +msgstr "" + +msgid "Export G-code file" +msgstr "" + +msgid "Send" +msgstr "" + +msgid "Export plate sliced file" +msgstr "" + +msgid "Export all sliced file" +msgstr "" + +msgid "Print all" +msgstr "" + +msgid "Send all" +msgstr "" + +msgid "Keyboard Shortcuts" +msgstr "" + +msgid "Show the list of the keyboard shortcuts" +msgstr "" + +msgid "Setup Wizard" +msgstr "" + +msgid "Show Configuration Folder" +msgstr "" + +msgid "Show Tip of the Day" +msgstr "" + +msgid "Check for Update" +msgstr "" + +msgid "Open Network Test" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "&About %s" +msgstr "" + +msgid "Upload Models" +msgstr "" + +msgid "Download Models" +msgstr "" + +msgid "Default View" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "" + +msgid "Top View" +msgstr "" + +#. TRN To be shown in the main menu View->Bottom +msgid "Bottom" +msgstr "" + +msgid "Bottom View" +msgstr "" + +msgid "Front" +msgstr "" + +msgid "Front View" +msgstr "" + +msgid "Rear" +msgstr "" + +msgid "Rear View" +msgstr "" + +msgid "Left" +msgstr "" + +msgid "Left View" +msgstr "" + +msgid "Right" +msgstr "" + +msgid "Right View" +msgstr "" + +msgid "Start a new window" +msgstr "" + +msgid "New Project" +msgstr "" + +msgid "Start a new project" +msgstr "" + +msgid "Open a project file" +msgstr "" + +msgid "Recent projects" +msgstr "" + +msgid "Save Project" +msgstr "" + +msgid "Save current project to file" +msgstr "" + +msgid "Save Project as" +msgstr "" + +msgid "Shift+" +msgstr "" + +msgid "Save current project as" +msgstr "" + +msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" +msgstr "" + +msgid "Load a model" +msgstr "" + +msgid "Import Configs" +msgstr "" + +msgid "Load configs" +msgstr "" + +msgid "Import" +msgstr "" + +msgid "Export all objects as one STL" +msgstr "" + +msgid "Export all objects as STLs" +msgstr "" + +msgid "Export Generic 3MF" +msgstr "" + +msgid "Export 3mf file without using some 3mf-extensions" +msgstr "" + +msgid "Export current sliced file" +msgstr "" + +msgid "Export all plate sliced file" +msgstr "" + +msgid "Export G-code" +msgstr "" + +msgid "Export current plate as G-code" +msgstr "" + +msgid "Export &Configs" +msgstr "" + +msgid "Export current configuration to files" +msgstr "" + +msgid "Export" +msgstr "" + +msgid "Quit" +msgstr "" + +msgid "Undo" +msgstr "" + +msgid "Redo" +msgstr "" + +msgid "Cut selection to clipboard" +msgstr "" + +msgid "Copy" +msgstr "" + +msgid "Copy selection to clipboard" +msgstr "" + +msgid "Paste" +msgstr "" + +msgid "Paste clipboard" +msgstr "" + +msgid "Delete selected" +msgstr "" + +msgid "Deletes the current selection" +msgstr "" + +msgid "Delete all" +msgstr "" + +msgid "Deletes all objects" +msgstr "" + +msgid "Clone selected" +msgstr "" + +msgid "Clone copies of selections" +msgstr "" + +msgid "Select all" +msgstr "" + +msgid "Selects all objects" +msgstr "" + +msgid "Deselect all" +msgstr "" + +msgid "Deselects all objects" +msgstr "" + +msgid "Use Perspective View" +msgstr "" + +msgid "Use Orthogonal View" +msgstr "" + +msgid "Show &G-code Window" +msgstr "" + +msgid "Show g-code window in Previce scene" +msgstr "" + +msgid "Show 3D Navigator" +msgstr "" + +msgid "Show 3D navigator in Prepare and Preview scene" +msgstr "" + +msgid "Reset Window Layout" +msgstr "" + +msgid "Reset to default window layout" +msgstr "" + +msgid "Show &Labels" +msgstr "" + +msgid "Show object labels in 3D scene" +msgstr "" + +msgid "Show &Overhang" +msgstr "" + +msgid "Show object overhang highlight in 3D scene" +msgstr "" + +msgid "Preferences" +msgstr "" + +msgid "View" +msgstr "" + +msgid "Help" +msgstr "" + +msgid "Temperature Calibration" +msgstr "" + +msgid "Pass 1" +msgstr "" + +msgid "Flow rate test - Pass 1" +msgstr "" + +msgid "Pass 2" +msgstr "" + +msgid "Flow rate test - Pass 2" +msgstr "" + +msgid "Flow rate" +msgstr "" + +msgid "Pressure advance" +msgstr "" + +msgid "Retraction test" +msgstr "" + +msgid "Orca Tolerance Test" +msgstr "" + +msgid "Max flowrate" +msgstr "" + +msgid "VFA" +msgstr "" + +msgid "More..." +msgstr "" + +msgid "Tutorial" +msgstr "" + +msgid "Calibration help" +msgstr "" + +msgid "More calibrations" +msgstr "" + +msgid "&Open G-code" +msgstr "" + +msgid "Open a G-code file" +msgstr "" + +msgid "Re&load from Disk" +msgstr "" + +msgid "Reload the plater from disk" +msgstr "" + +msgid "Export &Toolpaths as OBJ" +msgstr "" + +msgid "Export toolpaths as OBJ" +msgstr "" + +msgid "Open &Studio" +msgstr "" + +msgid "Open Studio" +msgstr "" + +msgid "&Quit" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Quit %s" +msgstr "" + +msgid "&File" +msgstr "" + +msgid "&View" +msgstr "" + +msgid "&Help" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "A file exists with the same name: %s, do you want to override it." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "A config exists with the same name: %s, do you want to override it." +msgstr "" + +msgid "Overwrite file" +msgstr "" + +msgid "Yes to All" +msgstr "" + +msgid "No to All" +msgstr "" + +msgid "Choose a directory" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "There is %d config exported. (Only non-system configs)" +msgid_plural "There are %d configs exported. (Only non-system configs)" +msgstr[0] "" +msgstr[1] "" + +msgid "Export result" +msgstr "" + +msgid "Select profile to load:" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "There is %d config imported. (Only non-system and compatible configs)" +msgid_plural "" +"There are %d configs imported. (Only non-system and compatible configs)" +msgstr[0] "" +msgstr[1] "" + +msgid "" +"\n" +"Hint: Make sure you have added the corresponding printer before importing " +"the configs." +msgstr "" + +msgid "Import result" +msgstr "" + +msgid "File is missing" +msgstr "" + +msgid "The project is no longer available." +msgstr "" + +msgid "Filament Settings" +msgstr "" + +msgid "" +"Do you want to synchronize your personal data from Bambu Cloud? \n" +"It contains the following information:\n" +"1. The Process presets\n" +"2. The Filament presets\n" +"3. The Printer presets" +msgstr "" + +msgid "Synchronization" +msgstr "" + +msgid "Initialize failed (No Device)!" +msgstr "" + +msgid "Initialize failed (Device connection not ready)!" +msgstr "" + +msgid "Initialize failed (No Camera Device)!" +msgstr "" + +msgid "Printer is busy downloading, Please wait for the downloading to finish." +msgstr "" + +msgid "Initialize failed (Not supported on the current printer version)!" +msgstr "" + +msgid "Initialize failed (Not accessible in LAN-only mode)!" +msgstr "" + +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initializing..." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Initialize failed (%s)!" +msgstr "" + +msgid "Network unreachable" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Stopped [%d]!" +msgstr "" + +msgid "Stopped." +msgstr "" + +msgid "LAN Connection Failed (Failed to start liveview)" +msgstr "" + +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Orca Slicer supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "Playing..." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Load failed [%d]!" +msgstr "" + +msgid "Loading..." +msgstr "" + +msgid "Year" +msgstr "" + +msgid "Month" +msgstr "" + +msgid "All Files" +msgstr "" + +msgid "Group files by year, recent first." +msgstr "" + +msgid "Group files by month, recent first." +msgstr "" + +msgid "Show all files, recent first." +msgstr "" + +msgid "Timelapse" +msgstr "" + +msgid "Switch to timelapse files." +msgstr "" + +msgid "Video" +msgstr "" + +msgid "Switch to video files." +msgstr "" + +msgid "Switch to 3mf model files." +msgstr "" + +msgid "Delete selected files from printer." +msgstr "" + +msgid "Download" +msgstr "" + +msgid "Download selected files from printer." +msgstr "" + +msgid "Select" +msgstr "" + +msgid "Batch manage files." +msgstr "" + +msgid "No printers." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Connect failed [%d]!" +msgstr "" + +msgid "Loading file list..." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "No files [%d]" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Load failed [%d]" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "You are going to delete %u file from printer. Are you sure to continue?" +msgid_plural "" +"You are going to delete %u files from printer. Are you sure to continue?" +msgstr[0] "" +msgstr[1] "" + +msgid "Delete files" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Do you want to delete the file '%s' from printer?" +msgstr "" + +msgid "Delete file" +msgstr "" + +msgid "Fetching model infomations ..." +msgstr "" + +msgid "Failed to fetching model infomations from printer." +msgstr "" + +msgid "Failed to parse model infomations." +msgstr "" + +msgid "" +"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer " +"and export a new .gcode.3mf file." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "File '%s' was lost! Please download it again." +msgstr "" + +msgid "Download waiting..." +msgstr "" + +msgid "Play" +msgstr "" + +msgid "Open Folder" +msgstr "" + +msgid "Download finished" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Downloading %d%%..." +msgstr "" + +msgid "Connection lost. Please retry." +msgstr "" + +msgid "The device cannot handle more conversations. Please retry later." +msgstr "" + +msgid "File not exists." +msgstr "" + +msgid "File checksum error. Please retry." +msgstr "" + +msgid "Not supported on the current printer version." +msgstr "" + +msgid "Storage unavailable, insert SD card." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Error code: %d" +msgstr "" + +msgid "Speed:" +msgstr "" + +msgid "Deadzone:" +msgstr "" + +msgid "Options:" +msgstr "" + +msgid "Zoom" +msgstr "" + +msgid "Translation/Zoom" +msgstr "" + +msgid "3Dconnexion settings" +msgstr "" + +msgid "Swap Y/Z axes" +msgstr "" + +msgid "Invert X axis" +msgstr "" + +msgid "Invert Y axis" +msgstr "" + +msgid "Invert Z axis" +msgstr "" + +msgid "Invert Yaw axis" +msgstr "" + +msgid "Invert Pitch axis" +msgstr "" + +msgid "Invert Roll axis" +msgstr "" + +msgid "Printing Progress" +msgstr "" + +msgid "Resume" +msgstr "" + +msgid "Stop" +msgstr "" + +msgid "0" +msgstr "" + +msgid "Layer: N/A" +msgstr "" + +msgid "Clear" +msgstr "" + +msgid "" +"You have completed printing the mall model, \n" +"but the synchronization of rating information has failed." +msgstr "" + +msgid "How do you like this printing file?" +msgstr "" + +msgid "" +"(The model has already been rated. Your rating will overwrite the previous " +"rating.)" +msgstr "" + +msgid "Rate" +msgstr "" + +msgid "Camera" +msgstr "" + +msgid "SD Card" +msgstr "" + +msgid "Camera Setting" +msgstr "" + +msgid "Switch Camera View" +msgstr "" + +msgid "Control" +msgstr "" + +msgid "Print Options" +msgstr "" + +msgid "100%" +msgstr "" + +msgid "Lamp" +msgstr "" + +msgid "Aux" +msgstr "" + +msgid "Cham" +msgstr "" + +msgid "Bed" +msgstr "" + +msgid "Unload" +msgstr "" + +msgid "Debug Info" +msgstr "" + +msgid "No SD Card" +msgstr "" + +msgid "SD Card Abnormal" +msgstr "" + +msgid "Cancel print" +msgstr "" + +msgid "Are you sure you want to cancel this print?" +msgstr "" + +msgid "Downloading..." +msgstr "" + +msgid "Cloud Slicing..." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "In Cloud Slicing Queue, there are %s tasks ahead." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Layer: %s" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Layer: %d/%d" +msgstr "" + +msgid "" +"Please heat the nozzle to above 170 degree before loading or unloading " +"filament." +msgstr "" + +msgid "Still unload" +msgstr "" + +msgid "Still load" +msgstr "" + +msgid "Please select an AMS slot before calibration" +msgstr "" + +msgid "" +"Cannot read filament info: the filament is loaded to the tool head,please " +"unload the filament and try again." +msgstr "" + +msgid "This only takes effect during printing" +msgstr "" + +msgid "Silent" +msgstr "" + +msgid "Standard" +msgstr "" + +msgid "Sport" +msgstr "" + +msgid "Ludicrous" +msgstr "" + +msgid "Can't start this without SD card." +msgstr "" + +msgid "Rate the Print Profile" +msgstr "" + +msgid "Comment" +msgstr "" + +msgid "Rate this print" +msgstr "" + +msgid "Add Photo" +msgstr "" + +msgid "Delete Photo" +msgstr "" + +msgid "Submit" +msgstr "" + +msgid "Please click on the star first." +msgstr "" + +msgid "InFo" +msgstr "" + +msgid "Get oss config failed." +msgstr "" + +msgid "Upload Pictrues" +msgstr "" + +msgid "Number of images successfully uploaded" +msgstr "" + +msgid " upload failed" +msgstr "" + +msgid " upload config prase failed\n" +msgstr "" + +msgid " No corresponding storage bucket\n" +msgstr "" + +msgid " can not be opened\n" +msgstr "" + +msgid "" +"The following issues occurred during the process of uploading images. Do you " +"want to ignore them?\n" +"\n" +msgstr "" + +msgid "info" +msgstr "" + +msgid "Synchronizing the printing results. Please retry a few seconds later." +msgstr "" + +msgid "Upload failed\n" +msgstr "" + +msgid "obtaining instance_id failed\n" +msgstr "" + +msgid "" +"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"\n" +" error code: " +msgstr "" + +msgid "error message: " +msgstr "" + +msgid "" +"\n" +"\n" +"Would you like to redirect to the webpage for rating?" +msgstr "" + +msgid "" +"Some of your images failed to upload. Would you like to redirect to the " +"webpage for rating?" +msgstr "" + +msgid "You can select up to 16 images." +msgstr "" + +msgid "" +"At least one successful print record of this print profile is required \n" +"to give a positive rating(4 or 5stars)." +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Update" +msgstr "" + +msgid "HMS" +msgstr "" + +msgid "Don't show again" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s error" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s has encountered an error" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s warning" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s has a warning" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s info" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s information" +msgstr "" + +msgid "Skip" +msgstr "" + +msgid "3D Mouse disconnected." +msgstr "" + +msgid "Configuration can update now." +msgstr "" + +msgid "Detail." +msgstr "" + +msgid "Integration was successful." +msgstr "" + +msgid "Integration failed." +msgstr "" + +msgid "Undo integration was successful." +msgstr "" + +msgid "New network plug-in available." +msgstr "" + +msgid "Details" +msgstr "" + +msgid "New printer config available." +msgstr "" + +msgid "Wiki" +msgstr "" + +msgid "Undo integration failed." +msgstr "" + +msgid "Exporting." +msgstr "" + +msgid "Software has New version." +msgstr "" + +msgid "Goto download page." +msgstr "" + +msgid "Open Folder." +msgstr "" + +msgid "Safely remove hardware." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%1$d Object has custom supports." +msgid_plural "%1$d Objects have custom supports." +msgstr[0] "" +msgstr[1] "" + +#, possible-c-format, possible-boost-format +msgid "%1$d Object has color painting." +msgid_plural "%1$d Objects have color painting." +msgstr[0] "" +msgstr[1] "" + +#, possible-c-format, possible-boost-format +msgid "%1$d object was loaded as a part of cut object." +msgid_plural "%1$d objects were loaded as parts of cut object" +msgstr[0] "" +msgstr[1] "" + +msgid "ERROR" +msgstr "" + +msgid "CANCELED" +msgstr "" + +msgid "COMPLETED" +msgstr "" + +msgid "Cancel upload" +msgstr "" + +msgid "Jump to" +msgstr "" + +msgid "Error:" +msgstr "" + +msgid "Warning:" +msgstr "" + +msgid "Export successfully." +msgstr "" + +msgid "Model file downloaded." +msgstr "" + +msgid "Serious warning:" +msgstr "" + +msgid " (Repair)" +msgstr "" + +msgid " Click here to install it." +msgstr "" + +msgid "WARNING:" +msgstr "" + +msgid "Your model needs support ! Please make support material enable." +msgstr "" + +msgid "Gcode path overlap" +msgstr "" + +msgid "Support painting" +msgstr "" + +msgid "Color painting" +msgstr "" + +msgid "Cut connectors" +msgstr "" + +msgid "Layers" +msgstr "" + +msgid "Range" +msgstr "" + +msgid "" +"The application cannot run normally because OpenGL version is lower than " +"2.0.\n" +msgstr "" + +msgid "Please upgrade your graphics card driver." +msgstr "" + +msgid "Unsupported OpenGL version" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Unable to load shaders:\n" +"%s" +msgstr "" + +msgid "Error loading shaders" +msgstr "" + +msgctxt "Layers" +msgid "Top" +msgstr "" + +msgctxt "Layers" +msgid "Bottom" +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "" + +msgid "Sensitivity of pausing is" +msgstr "" + +msgid "Enable detection of build plate position" +msgstr "" + +msgid "" +"The localization tag of build plate is detected, and printing is paused if " +"the tag is not in predefined range." +msgstr "" + +msgid "First Layer Inspection" +msgstr "" + +msgid "Auto-recovery from step loss" +msgstr "" + +msgid "Allow Prompt Sound" +msgstr "" + +msgid "Filament Tangle Detect" +msgstr "" + +msgid "Global" +msgstr "" + +msgid "Objects" +msgstr "" + +msgid "Advance" +msgstr "" + +msgid "Compare presets" +msgstr "" + +msgid "View all object's settings" +msgstr "" + +msgid "Remove current plate (if not last one)" +msgstr "" + +msgid "Auto orient objects on current plate" +msgstr "" + +msgid "Arrange objects on current plate" +msgstr "" + +msgid "Unlock current plate" +msgstr "" + +msgid "Lock current plate" +msgstr "" + +msgid "Edit current plate name" +msgstr "" + +msgid "Customize current plate" +msgstr "" + +#, possible-boost-format +msgid " plate %1%:" +msgstr "" + +msgid "Invalid name, the following characters are not allowed:" +msgstr "" + +msgid "Sliced Info" +msgstr "" + +msgid "Used Filament (m)" +msgstr "" + +msgid "Used Filament (mm³)" +msgstr "" + +msgid "Used Filament (g)" +msgstr "" + +msgid "Used Materials" +msgstr "" + +msgid "Estimated time" +msgstr "" + +msgid "Filament changes" +msgstr "" + +msgid "Click to edit preset" +msgstr "" + +msgid "Connection" +msgstr "" + +msgid "Bed type" +msgstr "" + +msgid "Flushing volumes" +msgstr "" + +msgid "Add one filament" +msgstr "" + +msgid "Remove last filament" +msgstr "" + +msgid "Synchronize filament list from AMS" +msgstr "" + +msgid "Set filaments to use" +msgstr "" + +msgid "Search plate, object and part." +msgstr "" + +msgid "" +"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +msgstr "" + +msgid "Sync filaments with AMS" +msgstr "" + +msgid "" +"Sync filaments with AMS will drop all current selected filament presets and " +"colors. Do you want to continue?" +msgstr "" + +msgid "" +"Already did a synchronization, do you want to sync only changes or resync " +"all?" +msgstr "" + +msgid "Sync" +msgstr "" + +msgid "Resync" +msgstr "" + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "" + +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Orca Slicer or restart Orca Slicer to check if there is an update to system " +"presets." +msgstr "" + +#, possible-boost-format +msgid "Do you want to save changes to \"%1%\"?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Successfully unmounted. The device %s(%s) can now be safely removed from the " +"computer." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Ejecting of device %s(%s) has failed." +msgstr "" + +msgid "Previous unsaved project detected, do you want to restore it?" +msgstr "" + +msgid "Restore" +msgstr "" + +msgid "" +"The current hot bed temperature is relatively high. The nozzle may be " +"clogged when printing this filament in a closed enclosure. Please open the " +"front door and/or remove the upper glass." +msgstr "" + +msgid "" +"The nozzle hardness required by the filament is higher than the default " +"nozzle hardness of the printer. Please replace the hardened nozzle or " +"filament, otherwise, the nozzle will be attrited or damaged." +msgstr "" + +msgid "" +"Enabling traditional timelapse photography may cause surface imperfections. " +"It is recommended to change to smooth mode." +msgstr "" + +msgid "Expand sidebar" +msgstr "" + +msgid "Collapse sidebar" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Loading file: %s" +msgstr "" + +msgid "The 3mf is not supported by OrcaSlicer, load geometry data only." +msgstr "" + +msgid "Load 3mf" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The 3mf's version %s is newer than %s's version %s, Found following keys " +"unrecognized:" +msgstr "" + +msgid "You'd better upgrade your software.\n" +msgstr "" + +msgid "Newer 3mf version" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " +"software." +msgstr "" + +msgid "Invalid values found in the 3mf:" +msgstr "" + +msgid "Please correct them in the param tabs" +msgstr "" + +msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgstr "" + +msgid "" +"Please confirm that these modified G-codes are safe to prevent any damage to " +"the machine!" +msgstr "" + +msgid "Modified G-codes" +msgstr "" + +msgid "The 3mf has following customized filament or printer presets:" +msgstr "" + +msgid "" +"Please confirm that the G-codes within these presets are safe to prevent any " +"damage to the machine!" +msgstr "" + +msgid "Customized Preset" +msgstr "" + +msgid "Name of components inside step file is not UTF8 format!" +msgstr "" + +msgid "The name may show garbage characters!" +msgstr "" + +#, possible-boost-format +msgid "Failed loading file \"%1%\". An invalid configuration was found." +msgstr "" + +msgid "Objects with zero volume removed" +msgstr "" + +msgid "The volume of the object is zero" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The object from file %s is too small, and maybe in meters or inches.\n" +" Do you want to scale to millimeters?" +msgstr "" + +msgid "Object too small" +msgstr "" + +msgid "" +"This file contains several objects positioned at multiple heights.\n" +"Instead of considering them as multiple objects, should \n" +"the file be loaded as a single object having multiple parts?" +msgstr "" + +msgid "Multi-part object detected" +msgstr "" + +msgid "Load these files as a single object with multiple parts?\n" +msgstr "" + +msgid "Object with multiple parts was detected" +msgstr "" + +msgid "The file does not contain any geometry data." +msgstr "" + +msgid "" +"Your object appears to be too large, Do you want to scale it down to fit the " +"heat bed automatically?" +msgstr "" + +msgid "Object too large" +msgstr "" + +msgid "Export STL file:" +msgstr "" + +msgid "Export AMF file:" +msgstr "" + +msgid "Save file as:" +msgstr "" + +msgid "Export OBJ file:" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The file %s already exists\n" +"Do you want to replace it?" +msgstr "" + +msgid "Comfirm Save As" +msgstr "" + +msgid "Delete object which is a part of cut object" +msgstr "" + +msgid "" +"You try to delete an object which is a part of a cut object.\n" +"This action will break a cut correspondence.\n" +"After that model consistency can't be guaranteed." +msgstr "" + +msgid "The selected object couldn't be split." +msgstr "" + +msgid "Another export job is running." +msgstr "" + +msgid "Unable to replace with more than one volume" +msgstr "" + +msgid "Error during replace" +msgstr "" + +msgid "Replace from:" +msgstr "" + +msgid "Select a new file" +msgstr "" + +msgid "File for the replace wasn't selected" +msgstr "" + +msgid "Please select a file" +msgstr "" + +msgid "Do you want to replace it" +msgstr "" + +msgid "Message" +msgstr "" + +msgid "Reload from:" +msgstr "" + +msgid "Unable to reload:" +msgstr "" + +msgid "Error during reload" +msgstr "" + +msgid "Slicing" +msgstr "" + +msgid "There are warnings after slicing models:" +msgstr "" + +msgid "warnings" +msgstr "" + +msgid "Invalid data" +msgstr "" + +msgid "Slicing Canceled" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Slicing Plate %d" +msgstr "" + +msgid "Please resolve the slicing errors and publish again." +msgstr "" + +msgid "" +"Network Plug-in is not detected. Network related features are unavailable." +msgstr "" + +msgid "" +"Preview only mode:\n" +"The loaded file contains gcode only, Can not enter the Prepare page" +msgstr "" + +msgid "You can keep the modified presets to the new project or discard them" +msgstr "" + +msgid "Creating a new project" +msgstr "" + +msgid "Load project" +msgstr "" + +msgid "" +"Failed to save the project.\n" +"Please check whether the folder exists online or if other programs open the " +"project file." +msgstr "" + +msgid "Save project" +msgstr "" + +msgid "Importing Model" +msgstr "" + +msgid "prepare 3mf file..." +msgstr "" + +msgid "downloading project ..." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Project downloaded %d%%" +msgstr "" + +msgid "" +"Importing to Orca Slicer failed. Please download the file and manually " +"import it." +msgstr "" + +msgid "Import SLA archive" +msgstr "" + +msgid "The selected file" +msgstr "" + +msgid "does not contain valid gcode." +msgstr "" + +msgid "Error occurs while loading G-code file" +msgstr "" + +msgid "Drop project file" +msgstr "" + +msgid "Please select an action" +msgstr "" + +msgid "Open as project" +msgstr "" + +msgid "Import geometry only" +msgstr "" + +msgid "Only one G-code file can be opened at the same time." +msgstr "" + +msgid "G-code loading" +msgstr "" + +msgid "G-code files can not be loaded with models together!" +msgstr "" + +msgid "Can not add models when in preview mode!" +msgstr "" + +msgid "Add Models" +msgstr "" + +msgid "All objects will be removed, continue?" +msgstr "" + +msgid "The current project has unsaved changes, save it before continue?" +msgstr "" + +msgid "Remember my choice." +msgstr "" + +msgid "Number of copies:" +msgstr "" + +msgid "Copies of the selected object" +msgstr "" + +msgid "Save G-code file as:" +msgstr "" + +msgid "Save SLA file as:" +msgstr "" + +msgid "The provided file name is not valid." +msgstr "" + +msgid "The following characters are not allowed by a FAT file system:" +msgstr "" + +msgid "Save Sliced file as:" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The file %s has been sent to the printer's storage space and can be viewed " +"on the printer." +msgstr "" + +msgid "" +"Unable to perform boolean operation on model meshes. Only positive parts " +"will be exported." +msgstr "" + +msgid "" +"Are you sure you want to store original SVGs with their local paths into the " +"3MF file?\n" +"If you hit 'NO', all SVGs in the project will not be editable any more." +msgstr "" + +msgid "Private protection" +msgstr "" + +msgid "Is the printer ready? Is the print sheet in place, empty and clean?" +msgstr "" + +msgid "Upload and Print" +msgstr "" + +msgid "" +"Print By Object: \n" +"Suggest to use auto-arrange to avoid collisions when printing." +msgstr "" + +msgid "Send G-code" +msgstr "" + +msgid "Send to printer" +msgstr "" + +msgid "Custom supports and color painting were removed before repairing." +msgstr "" + +msgid "Optimize Rotation" +msgstr "" + +msgid "Invalid number" +msgstr "" + +msgid "Plate Settings" +msgstr "" + +#, possible-boost-format +msgid "Number of currently selected parts: %1%\n" +msgstr "" + +#, possible-boost-format +msgid "Number of currently selected objects: %1%\n" +msgstr "" + +#, possible-boost-format +msgid "Part name: %1%\n" +msgstr "" + +#, possible-boost-format +msgid "Object name: %1%\n" +msgstr "" + +#, possible-boost-format +msgid "Size: %1% x %2% x %3% in\n" +msgstr "" + +#, possible-boost-format +msgid "Size: %1% x %2% x %3% mm\n" +msgstr "" + +#, possible-boost-format +msgid "Volume: %1% in³\n" +msgstr "" + +#, possible-boost-format +msgid "Volume: %1% mm³\n" +msgstr "" + +#, possible-boost-format +msgid "Triangles: %1%\n" +msgstr "" + +msgid "Tips:" +msgstr "" + +msgid "" +"\"Fix Model\" feature is currently only on Windows. Please repair the model " +"on Orca Slicer(windows) or CAD softwares." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " +"still want to do this printing, please set this filament's bed temperature " +"to non zero." +msgstr "" + +msgid "Switching the language requires application restart.\n" +msgstr "" + +msgid "Do you want to continue?" +msgstr "" + +msgid "Language selection" +msgstr "" + +msgid "Switching application language while some presets are modified." +msgstr "" + +msgid "Changing application language" +msgstr "" + +msgid "Changing the region will log out your account.\n" +msgstr "" + +msgid "Region selection" +msgstr "" + +msgid "Second" +msgstr "" + +msgid "Browse" +msgstr "" + +msgid "Choose Download Directory" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "Asia-Pacific" +msgstr "" + +msgid "China" +msgstr "" + +msgid "Europe" +msgstr "" + +msgid "North America" +msgstr "" + +msgid "Others" +msgstr "" + +msgid "Login Region" +msgstr "" + +msgid "Stealth Mode" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Metric" +msgstr "" + +msgid "Imperial" +msgstr "" + +msgid "Units" +msgstr "" + +msgid "Home" +msgstr "" + +msgid "Default Page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Zoom to mouse position" +msgstr "" + +msgid "" +"Zoom in towards the mouse pointer's position in the 3D view, rather than the " +"2D window center." +msgstr "" + +msgid "Use free camera" +msgstr "" + +msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "" + +msgid "Show splash screen" +msgstr "" + +msgid "Show the splash screen during startup." +msgstr "" + +msgid "Show \"Tip of the day\" notification after start" +msgstr "" + +msgid "If enabled, useful hints are displayed at startup." +msgstr "" + +msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgstr "" + +msgid "If enabled, auto-calculate everytime the color changed." +msgstr "" + +msgid "Auto sync user presets(Printer/Filament/Process)" +msgstr "" + +msgid "User Sync" +msgstr "" + +msgid "Update built-in Presets automatically." +msgstr "" + +msgid "System Sync" +msgstr "" + +msgid "Clear my choice on the unsaved presets." +msgstr "" + +msgid "Associate files to OrcaSlicer" +msgstr "" + +msgid "Associate .3mf files to OrcaSlicer" +msgstr "" + +msgid "If enabled, sets OrcaSlicer as default application to open .3mf files" +msgstr "" + +msgid "Associate .stl files to OrcaSlicer" +msgstr "" + +msgid "If enabled, sets OrcaSlicer as default application to open .stl files" +msgstr "" + +msgid "Associate .step/.stp files to OrcaSlicer" +msgstr "" + +msgid "If enabled, sets OrcaSlicer as default application to open .step files" +msgstr "" + +msgid "Maximum recent projects" +msgstr "" + +msgid "Maximum count of recent projects" +msgstr "" + +msgid "Clear my choice on the unsaved projects." +msgstr "" + +msgid "No warnings when loading 3MF with modified G-codes" +msgstr "" + +msgid "Auto-Backup" +msgstr "" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" + +msgid "every" +msgstr "" + +msgid "The peroid of backup in seconds." +msgstr "" + +msgid "Downloads" +msgstr "" + +msgid "Dark Mode" +msgstr "" + +msgid "Enable Dark mode" +msgstr "" + +msgid "Develop mode" +msgstr "" + +msgid "Skip AMS blacklist check" +msgstr "" + +msgid "Home page and daily tips" +msgstr "" + +msgid "Show home page on startup" +msgstr "" + +msgid "Sync settings" +msgstr "" + +msgid "User sync" +msgstr "" + +msgid "Preset sync" +msgstr "" + +msgid "Preferences sync" +msgstr "" + +msgid "View control settings" +msgstr "" + +msgid "Rotate of view" +msgstr "" + +msgid "Move of view" +msgstr "" + +msgid "Zoom of view" +msgstr "" + +msgid "Other" +msgstr "" + +msgid "Mouse wheel reverses when zooming" +msgstr "" + +msgid "Enable SSL(MQTT)" +msgstr "" + +msgid "Enable SSL(FTP)" +msgstr "" + +msgid "Internal developer mode" +msgstr "" + +msgid "Log Level" +msgstr "" + +msgid "fatal" +msgstr "" + +msgid "error" +msgstr "" + +msgid "warning" +msgstr "" + +msgid "debug" +msgstr "" + +msgid "trace" +msgstr "" + +msgid "Host Setting" +msgstr "" + +msgid "DEV host: api-dev.bambu-lab.com/v1" +msgstr "" + +msgid "QA host: api-qa.bambu-lab.com/v1" +msgstr "" + +msgid "PRE host: api-pre.bambu-lab.com/v1" +msgstr "" + +msgid "Product host" +msgstr "" + +msgid "debug save button" +msgstr "" + +msgid "save debug settings" +msgstr "" + +msgid "DEBUG settings have saved successfully!" +msgstr "" + +msgid "Switch cloud environment, Please login again!" +msgstr "" + +msgid "System presets" +msgstr "" + +msgid "User presets" +msgstr "" + +msgid "Incompatible presets" +msgstr "" + +msgid "AMS filaments" +msgstr "" + +msgid "Click to pick filament color" +msgstr "" + +msgid "Please choose the filament colour" +msgstr "" + +msgid "Add/Remove presets" +msgstr "" + +msgid "Edit preset" +msgstr "" + +msgid "Project-inside presets" +msgstr "" + +msgid "Add/Remove filaments" +msgstr "" + +msgid "Add/Remove materials" +msgstr "" + +msgid "Select/Remove printers(system presets)" +msgstr "" + +msgid "Create printer" +msgstr "" + +msgid "Incompatible" +msgstr "" + +msgid "The selected preset is null!" +msgstr "" + +msgid "Plate name" +msgstr "" + +msgid "Same as Global Print Sequence" +msgstr "" + +msgid "Print sequence" +msgstr "" + +msgid "Customize" +msgstr "" + +msgid "First layer filament sequence" +msgstr "" + +msgid "Same as Global Plate Type" +msgstr "" + +msgid "Same as Global Bed Type" +msgstr "" + +msgid "By Layer" +msgstr "" + +msgid "By Object" +msgstr "" + +msgid "Accept" +msgstr "" + +msgid "Log Out" +msgstr "" + +msgid "Slice all plate to obtain time and filament estimation" +msgstr "" + +msgid "Packing project data into 3mf file" +msgstr "" + +msgid "Uploading 3mf" +msgstr "" + +msgid "Jump to model publish web page" +msgstr "" + +msgid "Note: The preparation may takes several minutes. Please be patiant." +msgstr "" + +msgid "Publish" +msgstr "" + +msgid "Publish was cancelled" +msgstr "" + +msgid "Slicing Plate 1" +msgstr "" + +msgid "Packing data to 3mf" +msgstr "" + +msgid "Jump to webpage" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Save %s as" +msgstr "" + +msgid "User Preset" +msgstr "" + +msgid "Preset Inside Project" +msgstr "" + +msgid "Name is invalid;" +msgstr "" + +msgid "illegal characters:" +msgstr "" + +msgid "illegal suffix:" +msgstr "" + +msgid "Name is unavailable." +msgstr "" + +msgid "Overwrite a system profile is not allowed" +msgstr "" + +#, possible-boost-format +msgid "Preset \"%1%\" already exists." +msgstr "" + +#, possible-boost-format +msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgstr "" + +msgid "Please note that saving action will replace this preset" +msgstr "" + +msgid "The name is not allowed to be empty." +msgstr "" + +msgid "The name is not allowed to start with space character." +msgstr "" + +msgid "The name is not allowed to end with space character." +msgstr "" + +msgid "The name cannot be the same as a preset alias name." +msgstr "" + +msgid "Save preset" +msgstr "" + +msgctxt "PresetName" +msgid "Copy" +msgstr "" + +#, possible-boost-format +msgid "Printer \"%1%\" is selected with preset \"%2%\"" +msgstr "" + +#, possible-boost-format +msgid "Please choose an action with \"%1%\" preset after saving." +msgstr "" + +#, possible-boost-format +msgid "For \"%1%\", change \"%2%\" to \"%3%\" " +msgstr "" + +#, possible-boost-format +msgid "For \"%1%\", add \"%2%\" as a new preset" +msgstr "" + +#, possible-boost-format +msgid "Simply switch to \"%1%\"" +msgstr "" + +msgid "Task canceled" +msgstr "" + +msgid "(LAN)" +msgstr "" + +msgid "Search" +msgstr "" + +msgid "My Device" +msgstr "" + +msgid "Other Device" +msgstr "" + +msgid "Online" +msgstr "" + +msgid "Input access code" +msgstr "" + +msgid "Can't find my devices?" +msgstr "" + +msgid "Log out successful." +msgstr "" + +msgid "Offline" +msgstr "" + +msgid "Busy" +msgstr "" + +msgid "Bambu Cool Plate" +msgstr "" + +msgid "PLA Plate" +msgstr "" + +msgid "Bambu Engineering Plate" +msgstr "" + +msgid "Bambu Smooth PEI Plate" +msgstr "" + +msgid "High temperature Plate" +msgstr "" + +msgid "Bambu Textured PEI Plate" +msgstr "" + +msgid "Send print job to" +msgstr "" + +msgid "Refresh" +msgstr "" + +msgid "Bed Leveling" +msgstr "" + +msgid "Flow Dynamics Calibration" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "" + +msgid "send completed" +msgstr "" + +msgid "Error code" +msgstr "" + +msgid "Printer local connection failed, please try again." +msgstr "" + +msgid "No login account, only printers in LAN mode are displayed" +msgstr "" + +msgid "Connecting to server" +msgstr "" + +msgid "Synchronizing device information" +msgstr "" + +msgid "Synchronizing device information time out" +msgstr "" + +msgid "Cannot send the print job when the printer is updating firmware" +msgstr "" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends" +msgstr "" + +msgid "The printer is busy on other print job" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filament %s exceeds the number of AMS slots. Please update the printer " +"firmware to support AMS slot assignment." +msgstr "" + +msgid "" +"Filament exceeds the number of AMS slots. Please update the printer firmware " +"to support AMS slot assignment." +msgstr "" + +msgid "" +"Filaments to AMS slots mappings have been established. You can click a " +"filament above to change its mapping AMS slot" +msgstr "" + +msgid "" +"Please click each filament above to specify its mapping AMS slot before " +"sending the print job" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filament %s does not match the filament in AMS slot %s. Please update the " +"printer firmware to support AMS slot assignment." +msgstr "" + +msgid "" +"Filament does not match the filament in AMS slot. Please update the printer " +"firmware to support AMS slot assignment." +msgstr "" + +msgid "" +"The printer firmware only supports sequential mapping of filament => AMS " +"slot." +msgstr "" + +msgid "An SD card needs to be inserted before printing." +msgstr "" + +msgid "The selected printer is incompatible with the chosen printer presets." +msgstr "" + +msgid "An SD card needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" + +msgid "Cannot send the print job for empty plate" +msgstr "" + +msgid "This printer does not support printing all plates" +msgstr "" + +msgid "" +"When enable spiral vase mode, machines with I3 structure will not generate " +"timelapse videos." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" + +msgid "Errors" +msgstr "" + +msgid "Please check the following:" +msgstr "" + +msgid "" +"The printer type selected when generating G-Code is not consistent with the " +"currently selected printer. It is recommended that you use the same printer " +"type for slicing." +msgstr "" + +msgid "" +"There are some unknown filaments in the AMS mappings. Please check whether " +"they are the required filaments. If they are okay, press \"Confirm\" to " +"start printing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "nozzle in preset: %s %s" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "nozzle memorized: %.1f %s" +msgstr "" + +msgid "" +"Your nozzle diameter in preset is not consistent with memorized nozzle " +"diameter. Did you change your nozzle lately?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "*Printing %s material with %s may cause nozzle damage" +msgstr "" + +msgid "" +"Please click the confirm button if you still want to proceed with printing." +msgstr "" + +msgid "Hardened Steel" +msgstr "" + +msgid "Stainless Steel" +msgstr "" + +msgid "" +"Connecting to the printer. Unable to cancel during the connection process." +msgstr "" + +msgid "Preparing print job" +msgstr "" + +msgid "Abnormal print file data. Please slice again" +msgstr "" + +msgid "The name length exceeds the limit." +msgstr "" + +msgid "" +"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " +"scattered surface." +msgstr "" + +msgid "Automatic flow calibration using Micro Lidar" +msgstr "" + +msgid "Modifying the device name" +msgstr "" + +msgid "Send to Printer SD card" +msgstr "" + +msgid "Cannot send the print task when the upgrade is in progress" +msgstr "" + +msgid "An SD card needs to be inserted before send to printer SD card." +msgstr "" + +msgid "The printer is required to be in the same LAN as Orca Slicer." +msgstr "" + +msgid "The printer does not support sending to printer SD card." +msgstr "" + +msgid "Slice ok." +msgstr "" + +msgid "View all Daily tips" +msgstr "" + +msgid "Failed to create socket" +msgstr "" + +msgid "Failed to connect socket" +msgstr "" + +msgid "Failed to publish login request" +msgstr "" + +msgid "Get ticket from device timeout" +msgstr "" + +msgid "Get ticket from server timeout" +msgstr "" + +msgid "Failed to post ticket to server" +msgstr "" + +msgid "Failed to parse login report reason" +msgstr "" + +msgid "Receive login report timeout" +msgstr "" + +msgid "Unknown Failure" +msgstr "" + +msgid "Log in printer" +msgstr "" + +msgid "Would you like to log in this printer with current account?" +msgstr "" + +msgid "Check the reason" +msgstr "" + +msgid "Read and accept" +msgstr "" + +msgid "Terms and Conditions" +msgstr "" + +msgid "" +"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " +"device, please read the termsand conditions.By clicking to agree to use your " +"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " +"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" + +msgid "and" +msgstr "" + +msgid "Privacy Policy" +msgstr "" + +msgid "We ask for your help to improve everyone's printer" +msgstr "" + +msgid "Statement about User Experience Improvement Program" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"In the 3D Printing community, we learn from each other's successes and " +"failures to adjust our own slicing parameters and settings. %s follows the " +"same principle and uses machine learning to improve its performance from the " +"successes and failures of the vast number of prints by our users. We are " +"training %s to be smarter by feeding them the real-world data. If you are " +"willing, this service will access information from your error logs and usage " +"logs, which may include information described in Privacy Policy. We will " +"not collect any Personal Data by which an individual can be identified " +"directly or indirectly, including without limitation names, addresses, " +"payment information, or phone numbers. By enabling this service, you agree " +"to these terms and the statement about Privacy Policy." +msgstr "" + +msgid "Statement on User Experience Improvement Plan" +msgstr "" + +msgid "Log in successful." +msgstr "" + +msgid "Log out printer" +msgstr "" + +msgid "Would you like to log out the printer?" +msgstr "" + +msgid "Please log in first." +msgstr "" + +msgid "There was a problem connecting to the printer. Please try again." +msgstr "" + +msgid "Failed to log out." +msgstr "" + +#. TRN "Save current Settings" +#, possible-c-format, possible-boost-format +msgid "Save current %s" +msgstr "" + +msgid "Delete this preset" +msgstr "" + +msgid "Search in preset" +msgstr "" + +msgid "Click to reset all settings to the last saved preset." +msgstr "" + +msgid "" +"Prime tower is required for smooth timeplase. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for smooth timelapse. There may be flaws on the " +"model without prime tower. Do you want to enable prime tower?" +msgstr "" + +msgid "Still print by object?" +msgstr "" + +msgid "" +"We have added an experimental style \"Tree Slim\" that features smaller " +"support volume but weaker strength.\n" +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +msgstr "" + +msgid "" +"Change these settings automatically? \n" +"Yes - Change these settings automatically\n" +"No - Do not change these settings for me" +msgstr "" + +msgid "" +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." +msgstr "" + +msgid "" +"When using support material for the support interface, We recommend the " +"following settings:\n" +"0 top z distance, 0 interface spacing, concentric pattern and disable " +"independent support layer height" +msgstr "" + +msgid "" +"Enabling this option will modify the model's shape. If your print requires " +"precise dimensions or is part of an assembly, it's important to double-check " +"whether this change in geometry impacts the functionality of your print." +msgstr "" + +msgid "Are you sure you want to enable this option?" +msgstr "" + +msgid "" +"Layer height is too small.\n" +"It will set to min_layer_height\n" +msgstr "" + +msgid "" +"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " +"height limits ,this may cause printing quality issues." +msgstr "" + +msgid "Adjust to the set range automatically? \n" +msgstr "" + +msgid "Adjust" +msgstr "" + +msgid "Ignore" +msgstr "" + +msgid "" +"When recording timelapse without toolhead, it is recommended to add a " +"\"Timelapse Wipe Tower\" \n" +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." +msgstr "" + +msgid "Line width" +msgstr "" + +msgid "Seam" +msgstr "" + +msgid "Precision" +msgstr "" + +msgid "Wall generator" +msgstr "" + +msgid "Walls and surfaces" +msgstr "" + +msgid "Bridging" +msgstr "" + +msgid "Overhangs" +msgstr "" + +msgid "Walls" +msgstr "" + +msgid "Top/bottom shells" +msgstr "" + +msgid "Initial layer speed" +msgstr "" + +msgid "Other layers speed" +msgstr "" + +msgid "Overhang speed" +msgstr "" + +msgid "" +"This is the speed for various overhang degrees. Overhang degrees are " +"expressed as a percentage of line width. 0 speed means no slowing down for " +"the overhang degree range and wall speed is used" +msgstr "" + +msgid "Bridge" +msgstr "" + +msgid "Set speed for external and internal bridges" +msgstr "" + +msgid "Travel speed" +msgstr "" + +msgid "Acceleration" +msgstr "" + +msgid "Jerk(XY)" +msgstr "" + +msgid "Raft" +msgstr "" + +msgid "Support filament" +msgstr "" + +msgid "Tree supports" +msgstr "" + +msgid "Prime tower" +msgstr "" + +msgid "Special mode" +msgstr "" + +msgid "G-code output" +msgstr "" + +msgid "Post-processing Scripts" +msgstr "" + +msgid "Notes" +msgstr "" + +msgid "Frequent" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Following line %s contains reserved keywords.\n" +"Please remove it, or will beat G-code visualization and printing time " +"estimation." +msgid_plural "" +"Following lines %s contain reserved keywords.\n" +"Please remove them, or will beat G-code visualization and printing time " +"estimation." +msgstr[0] "" +msgstr[1] "" + +msgid "Reserved keywords found" +msgstr "" + +msgid "Setting Overrides" +msgstr "" + +msgid "Retraction" +msgstr "" + +msgid "Basic information" +msgstr "" + +msgid "Recommended nozzle temperature" +msgstr "" + +msgid "Recommended nozzle temperature range of this filament. 0 means no set" +msgstr "" + +msgid "Print chamber temperature" +msgstr "" + +msgid "Print temperature" +msgstr "" + +msgid "Nozzle" +msgstr "" + +msgid "Nozzle temperature when printing" +msgstr "" + +msgid "Cool plate" +msgstr "" + +msgid "" +"Bed temperature when cool plate is installed. Value 0 means the filament " +"does not support to print on the Cool Plate" +msgstr "" + +msgid "Engineering plate" +msgstr "" + +msgid "" +"Bed temperature when engineering plate is installed. Value 0 means the " +"filament does not support to print on the Engineering Plate" +msgstr "" + +msgid "Smooth PEI Plate / High Temp Plate" +msgstr "" + +msgid "" +"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " +"Value 0 means the filament does not support to print on the Smooth PEI Plate/" +"High Temp Plate" +msgstr "" + +msgid "Textured PEI Plate" +msgstr "" + +msgid "" +"Bed temperature when Textured PEI Plate is installed. Value 0 means the " +"filament does not support to print on the Textured PEI Plate" +msgstr "" + +msgid "Volumetric speed limitation" +msgstr "" + +msgid "Cooling" +msgstr "" + +msgid "Cooling for specific layer" +msgstr "" + +msgid "Part cooling fan" +msgstr "" + +msgid "Min fan speed threshold" +msgstr "" + +msgid "" +"Part cooling fan speed will start to run at min speed when the estimated " +"layer time is no longer than the layer time in setting. When layer time is " +"shorter than threshold, fan speed is interpolated between the minimum and " +"maximum fan speed according to layer printing time" +msgstr "" + +msgid "Max fan speed threshold" +msgstr "" + +msgid "" +"Part cooling fan speed will be max when the estimated layer time is shorter " +"than the setting value" +msgstr "" + +msgid "Auxiliary part cooling fan" +msgstr "" + +msgid "Exhaust fan" +msgstr "" + +msgid "During print" +msgstr "" + +msgid "Complete print" +msgstr "" + +msgid "Filament start G-code" +msgstr "" + +msgid "Filament end G-code" +msgstr "" + +msgid "Multimaterial" +msgstr "" + +msgid "Wipe tower parameters" +msgstr "" + +msgid "Toolchange parameters with single extruder MM printers" +msgstr "" + +msgid "Ramming settings" +msgstr "" + +msgid "Toolchange parameters with multi extruder MM printers" +msgstr "" + +msgid "Printable space" +msgstr "" + +msgid "Cooling Fan" +msgstr "" + +msgid "Fan speed-up time" +msgstr "" + +msgid "Extruder Clearance" +msgstr "" + +msgid "Adaptive bed mesh" +msgstr "" + +msgid "Accessory" +msgstr "" + +msgid "Machine gcode" +msgstr "" + +msgid "Machine start G-code" +msgstr "" + +msgid "Machine end G-code" +msgstr "" + +msgid "Printing by object G-code" +msgstr "" + +msgid "Before layer change G-code" +msgstr "" + +msgid "Layer change G-code" +msgstr "" + +msgid "Time lapse G-code" +msgstr "" + +msgid "Change filament G-code" +msgstr "" + +msgid "Change extrusion role G-code" +msgstr "" + +msgid "Pause G-code" +msgstr "" + +msgid "Template Custom G-code" +msgstr "" + +msgid "Motion ability" +msgstr "" + +msgid "Normal" +msgstr "" + +msgid "Speed limitation" +msgstr "" + +msgid "Acceleration limitation" +msgstr "" + +msgid "Jerk limitation" +msgstr "" + +msgid "Single extruder multimaterial setup" +msgstr "" + +msgid "Wipe tower" +msgstr "" + +msgid "Single extruder multimaterial parameters" +msgstr "" + +msgid "Layer height limits" +msgstr "" + +msgid "Lift Z Enforcement" +msgstr "" + +msgid "Retraction when switching material" +msgstr "" + +msgid "" +"The Wipe option is not available when using the Firmware Retraction mode.\n" +"\n" +"Shall I disable it in order to enable Firmware Retraction?" +msgstr "" + +msgid "Firmware Retraction" +msgstr "" + +msgid "Detached" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"%d Filament Preset and %d Process Preset is attached to this printer. Those " +"presets would be deleted if the printer is deleted." +msgstr "" + +msgid "Presets inherited by other presets can not be deleted!" +msgstr "" + +msgid "The following presets inherit this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, possible-boost-format +msgid "%1% Preset" +msgstr "" + +msgid "Following preset will be deleted too." +msgid_plural "Following presets will be deleted too." +msgstr[0] "" +msgstr[1] "" + +msgid "" +"Are you sure to delete the selected preset? \n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" + +#, possible-boost-format +msgid "Are you sure to %1% the selected preset?" +msgstr "" + +msgid "All" +msgstr "" + +msgid "Set" +msgstr "" + +msgid "Click to reset current value and attach to the global value." +msgstr "" + +msgid "Click to drop current modify and reset to saved value." +msgstr "" + +msgid "Process Settings" +msgstr "" + +msgid "Undef" +msgstr "" + +msgid "Unsaved Changes" +msgstr "" + +msgid "Transfer or discard changes" +msgstr "" + +msgid "Old Value" +msgstr "" + +msgid "New Value" +msgstr "" + +msgid "Transfer" +msgstr "" + +msgid "Don't save" +msgstr "" + +msgid "Discard" +msgstr "" + +msgid "Click the right mouse button to display the full text." +msgstr "" + +msgid "All changes will not be saved" +msgstr "" + +msgid "All changes will be discarded." +msgstr "" + +msgid "Save the selected options." +msgstr "" + +msgid "Keep the selected options." +msgstr "" + +msgid "Transfer the selected options to the newly selected preset." +msgstr "" + +#, possible-boost-format +msgid "" +"Save the selected options to preset \n" +"\"%1%\"." +msgstr "" + +#, possible-boost-format +msgid "" +"Transfer the selected options to the newly selected preset \n" +"\"%1%\"." +msgstr "" + +#, possible-boost-format +msgid "Preset \"%1%\" contains the following unsaved changes:" +msgstr "" + +#, possible-boost-format +msgid "" +"Preset \"%1%\" is not compatible with the new printer profile and it " +"contains the following unsaved changes:" +msgstr "" + +#, possible-boost-format +msgid "" +"Preset \"%1%\" is not compatible with the new process profile and it " +"contains the following unsaved changes:" +msgstr "" + +#, possible-boost-format +msgid "" +"You have changed some settings of preset \"%1%\". \n" +"Would you like to keep these changed settings (new value) after switching " +"preset?" +msgstr "" + +msgid "" +"You have changed some preset settings. \n" +"Would you like to keep these changed settings (new value) after switching " +"preset?" +msgstr "" + +msgid "Extruders count" +msgstr "" + +msgid "General" +msgstr "" + +msgid "Capabilities" +msgstr "" + +msgid "Show all presets (including incompatible)" +msgstr "" + +msgid "Select presets to compare" +msgstr "" + +msgid "" +"You can only transfer to current active profile because it has been modified." +msgstr "" + +msgid "" +"Transfer the selected options from left preset to the right.\n" +"Note: New modified presets will be selected in settings tabs after close " +"this dialog." +msgstr "" + +msgid "Transfer values from left to right" +msgstr "" + +msgid "" +"If enabled, this dialog can be used for transver selected values from left " +"to right preset." +msgstr "" + +msgid "Add File" +msgstr "" + +msgid "Set as cover" +msgstr "" + +msgid "Cover" +msgstr "" + +#, possible-boost-format +msgid "The name \"%1%\" already exists." +msgstr "" + +msgid "Basic Info" +msgstr "" + +msgid "Pictures" +msgstr "" + +msgid "Bill of Materials" +msgstr "" + +msgid "Assembly Guide" +msgstr "" + +msgid "Author" +msgstr "" + +msgid "Model Name" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s Update" +msgstr "" + +msgid "A new version is available" +msgstr "" + +msgid "Configuration update" +msgstr "" + +msgid "A new configuration package available, Do you want to install it?" +msgstr "" + +msgid "Description:" +msgstr "" + +msgid "Configuration incompatible" +msgstr "" + +msgid "the configuration package is incompatible with current application." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The configuration package is incompatible with current application.\n" +"%s will update the configuration package, Otherwise it won't be able to start" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Exit %s" +msgstr "" + +msgid "the Configuration package is incompatible with current APP." +msgstr "" + +msgid "Configuration updates" +msgstr "" + +msgid "No updates available." +msgstr "" + +msgid "The configuration is up to date." +msgstr "" + +msgid "Ramming customization" +msgstr "" + +msgid "" +"Ramming denotes the rapid extrusion just before a tool change in a single-" +"extruder MM printer. Its purpose is to properly shape the end of the " +"unloaded filament so it does not prevent insertion of the new filament and " +"can itself be reinserted later. This phase is important and different " +"materials can require different extrusion speeds to get the good shape. For " +"this reason, the extrusion rates during ramming are adjustable.\n" +"\n" +"This is an expert-level setting, incorrect adjustment will likely lead to " +"jams, extruder wheel grinding into filament etc." +msgstr "" + +msgid "Total ramming time" +msgstr "" + +msgid "s" +msgstr "" + +msgid "Total rammed volume" +msgstr "" + +msgid "Ramming line width" +msgstr "" + +msgid "Ramming line spacing" +msgstr "" + +msgid "Auto-Calc" +msgstr "" + +msgid "Re-calculate" +msgstr "" + +msgid "Flushing volumes for filament change" +msgstr "" + +msgid "" +"Orca would re-calculate your flushing volumes everytime the filaments color " +"changed. You could disable the auto-calculate in Orca Slicer > Preferences" +msgstr "" + +msgid "Flushing volume (mm³) for each filament pair." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Suggestion: Flushing Volume in range [%d, %d]" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The multiplier should be in range [%.2f, %.2f]." +msgstr "" + +msgid "Multiplier" +msgstr "" + +msgid "unloaded" +msgstr "" + +msgid "loaded" +msgstr "" + +msgid "Filament #" +msgstr "" + +msgid "From" +msgstr "" + +msgid "To" +msgstr "" + +msgid "Bambu Network plug-in not detected." +msgstr "" + +msgid "Click here to download it." +msgstr "" + +msgid "Login" +msgstr "" + +msgid "The configuration package is changed in previous Config Guide" +msgstr "" + +msgid "Configuration package changed" +msgstr "" + +msgid "Toolbar" +msgstr "" + +msgid "Objects list" +msgstr "" + +msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" +msgstr "" + +msgid "⌘+Shift+G" +msgstr "" + +msgid "Ctrl+Shift+G" +msgstr "" + +msgid "Paste from clipboard" +msgstr "" + +msgid "Show/Hide 3Dconnexion devices settings dialog" +msgstr "" + +msgid "Switch table page" +msgstr "" + +msgid "Show keyboard shortcuts list" +msgstr "" + +msgid "Global shortcuts" +msgstr "" + +msgid "Rotate View" +msgstr "" + +msgid "Pan View" +msgstr "" + +msgid "Mouse wheel" +msgstr "" + +msgid "Zoom View" +msgstr "" + +msgid "Shift+A" +msgstr "" + +msgid "Shift+R" +msgstr "" + +msgid "" +"Auto orientates selected objects or all objects.If there are selected " +"objects, it just orientates the selected ones.Otherwise, it will orientates " +"all objects in the current disk." +msgstr "" + +msgid "Shift+Tab" +msgstr "" + +msgid "Collapse/Expand the sidebar" +msgstr "" + +msgid "⌘+Any arrow" +msgstr "" + +msgid "Movement in camera space" +msgstr "" + +msgid "⌥+Left mouse button" +msgstr "" + +msgid "Select a part" +msgstr "" + +msgid "⌘+Left mouse button" +msgstr "" + +msgid "Select multiple objects" +msgstr "" + +msgid "Ctrl+Any arrow" +msgstr "" + +msgid "Alt+Left mouse button" +msgstr "" + +msgid "Ctrl+Left mouse button" +msgstr "" + +msgid "Shift+Left mouse button" +msgstr "" + +msgid "Select objects by rectangle" +msgstr "" + +msgid "Arrow Up" +msgstr "" + +msgid "Move selection 10 mm in positive Y direction" +msgstr "" + +msgid "Arrow Down" +msgstr "" + +msgid "Move selection 10 mm in negative Y direction" +msgstr "" + +msgid "Arrow Left" +msgstr "" + +msgid "Move selection 10 mm in negative X direction" +msgstr "" + +msgid "Arrow Right" +msgstr "" + +msgid "Move selection 10 mm in positive X direction" +msgstr "" + +msgid "Shift+Any arrow" +msgstr "" + +msgid "Movement step set to 1 mm" +msgstr "" + +msgid "keyboard 1-9: set filament for object/part" +msgstr "" + +msgid "Camera view - Default" +msgstr "" + +msgid "Camera view - Top" +msgstr "" + +msgid "Camera view - Bottom" +msgstr "" + +msgid "Camera view - Front" +msgstr "" + +msgid "Camera view - Behind" +msgstr "" + +msgid "Camera Angle - Left side" +msgstr "" + +msgid "Camera Angle - Right side" +msgstr "" + +msgid "Select all objects" +msgstr "" + +msgid "Gizmo move" +msgstr "" + +msgid "Gizmo scale" +msgstr "" + +msgid "Gizmo rotate" +msgstr "" + +msgid "Gizmo cut" +msgstr "" + +msgid "Gizmo Place face on bed" +msgstr "" + +msgid "Gizmo SLA support points" +msgstr "" + +msgid "Gizmo FDM paint-on seam" +msgstr "" + +msgid "Gizmo Text emboss / engrave" +msgstr "" + +msgid "Zoom in" +msgstr "" + +msgid "Zoom out" +msgstr "" + +msgid "Switch between Prepare/Preview" +msgstr "" + +msgid "Plater" +msgstr "" + +msgid "Move: press to snap by 1mm" +msgstr "" + +msgid "⌘+Mouse wheel" +msgstr "" + +msgid "Support/Color Painting: adjust pen radius" +msgstr "" + +msgid "⌥+Mouse wheel" +msgstr "" + +msgid "Support/Color Painting: adjust section position" +msgstr "" + +msgid "Ctrl+Mouse wheel" +msgstr "" + +msgid "Alt+Mouse wheel" +msgstr "" + +msgid "Gizmo" +msgstr "" + +msgid "Set extruder number for the objects and parts" +msgstr "" + +msgid "Delete objects, parts, modifiers " +msgstr "" + +msgid "Select the object/part and press space to change the name" +msgstr "" + +msgid "Mouse click" +msgstr "" + +msgid "Select the object/part and mouse click to change the name" +msgstr "" + +msgid "Objects List" +msgstr "" + +msgid "Vertical slider - Move active thumb Up" +msgstr "" + +msgid "Vertical slider - Move active thumb Down" +msgstr "" + +msgid "Horizontal slider - Move active thumb Left" +msgstr "" + +msgid "Horizontal slider - Move active thumb Right" +msgstr "" + +msgid "On/Off one layer mode of the vertical slider" +msgstr "" + +msgid "On/Off g-code window" +msgstr "" + +msgid "Move slider 5x faster" +msgstr "" + +msgid "Shift+Mouse wheel" +msgstr "" + +msgid "Release Note" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "version %s update information :" +msgstr "" + +msgid "Network plug-in update" +msgstr "" + +msgid "" +"Click OK to update the Network plug-in when Orca Slicer launches next time." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgstr "" + +msgid "New version of Orca Slicer" +msgstr "" + +msgid "Skip this Version" +msgstr "" + +msgid "Done" +msgstr "" + +msgid "Confirm and Update Nozzle" +msgstr "" + +msgid "LAN Connection Failed (Sending print file)" +msgstr "" + +msgid "" +"Step 1, please confirm Orca Slicer and your printer are in the same LAN." +msgstr "" + +msgid "" +"Step 2, if the IP and Access Code below are different from the actual values " +"on your printer, please correct them." +msgstr "" + +msgid "IP" +msgstr "" + +msgid "Access Code" +msgstr "" + +msgid "Where to find your printer's IP and Access Code?" +msgstr "" + +msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgstr "" + +msgid "Test" +msgstr "" + +msgid "IP and Access Code Verified! You may close the window" +msgstr "" + +msgid "Connection failed, please double check IP and Access Code" +msgstr "" + +msgid "" +"Connection failed! If your IP and Access Code is correct, \n" +"please move to step 3 for troubleshooting network issues" +msgstr "" + +msgid "Model:" +msgstr "" + +msgid "Serial:" +msgstr "" + +msgid "Version:" +msgstr "" + +msgid "Update firmware" +msgstr "" + +msgid "Printing" +msgstr "" + +msgid "Idle" +msgstr "" + +msgid "Beta version" +msgstr "" + +msgid "Latest version" +msgstr "" + +msgid "Updating" +msgstr "" + +msgid "Updating failed" +msgstr "" + +msgid "Updating successful" +msgstr "" + +msgid "" +"Are you sure you want to update? This will take about 10 minutes. Do not " +"turn off the power while the printer is updating." +msgstr "" + +msgid "" +"An important update was detected and needs to be run before printing can " +"continue. Do you want to update now? You can also update later from 'Upgrade " +"firmware'." +msgstr "" + +msgid "" +"The firmware version is abnormal. Repairing and updating are required before " +"printing. Do you want to update now? You can also update later on printer or " +"update next time starting the studio." +msgstr "" + +msgid "Extension Board" +msgstr "" + +msgid "Saving objects into the 3mf failed." +msgstr "" + +msgid "Only Windows 10 is supported." +msgstr "" + +msgid "Failed to initialize the WinRT library." +msgstr "" + +msgid "Exporting objects" +msgstr "" + +msgid "Failed loading objects." +msgstr "" + +msgid "Repairing object by Windows service" +msgstr "" + +msgid "Repair failed." +msgstr "" + +msgid "Loading repaired objects" +msgstr "" + +msgid "Exporting 3mf file failed" +msgstr "" + +msgid "Import 3mf file failed" +msgstr "" + +msgid "Repaired 3mf file does not contain any object" +msgstr "" + +msgid "Repaired 3mf file contains more than one object" +msgstr "" + +msgid "Repaired 3mf file does not contain any volume" +msgstr "" + +msgid "Repaired 3mf file contains more than one volume" +msgstr "" + +msgid "Repair finished" +msgstr "" + +msgid "Repair canceled" +msgstr "" + +#, possible-boost-format +msgid "Copying of file %1% to %2% failed: %3%" +msgstr "" + +msgid "Need to check the unsaved changes before configuration updates." +msgstr "" + +msgid "Configuration package: " +msgstr "" + +msgid " updated to " +msgstr "" + +msgid "Open G-code file:" +msgstr "" + +msgid "" +"One object has empty initial layer and can't be printed. Please Cut the " +"bottom or enable supports." +msgstr "" + +#, possible-boost-format +msgid "Object can't be printed for empty layer between %1% and %2%." +msgstr "" + +#, possible-boost-format +msgid "Object: %1%" +msgstr "" + +msgid "" +"Maybe parts of the object at these height are too thin, or the object has " +"faulty mesh" +msgstr "" + +msgid "No object can be printed. Maybe too small" +msgstr "" + +msgid "" +"Failed to generate gcode for invalid custom G-code.\n" +"\n" +msgstr "" + +msgid "Please check the custom G-code or use the default custom G-code." +msgstr "" + +#, possible-boost-format +msgid "Generating G-code: layer %1%" +msgstr "" + +msgid "Inner wall" +msgstr "" + +msgid "Outer wall" +msgstr "" + +msgid "Overhang wall" +msgstr "" + +msgid "Sparse infill" +msgstr "" + +msgid "Internal solid infill" +msgstr "" + +msgid "Top surface" +msgstr "" + +msgid "Bottom surface" +msgstr "" + +msgid "Internal Bridge" +msgstr "" + +msgid "Gap infill" +msgstr "" + +msgid "Skirt" +msgstr "" + +msgid "Support interface" +msgstr "" + +msgid "Support transition" +msgstr "" + +msgid "Multiple" +msgstr "" + +#, possible-boost-format +msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgstr "" + +msgid "" +"Invalid spacing supplied to Flow::with_spacing(), check your layer height " +"and extrusion width" +msgstr "" + +msgid "undefined error" +msgstr "" + +msgid "too many files" +msgstr "" + +msgid "file too large" +msgstr "" + +msgid "unsupported method" +msgstr "" + +msgid "unsupported encryption" +msgstr "" + +msgid "unsupported feature" +msgstr "" + +msgid "failed finding central directory" +msgstr "" + +msgid "not a ZIP archive" +msgstr "" + +msgid "invalid header or corrupted" +msgstr "" + +msgid "unsupported multidisk" +msgstr "" + +msgid "decompression failed" +msgstr "" + +msgid "compression failed" +msgstr "" + +msgid "unexpected decompressed size" +msgstr "" + +msgid "CRC check failed" +msgstr "" + +msgid "unsupported central directory size" +msgstr "" + +msgid "allocation failed" +msgstr "" + +msgid "file open failed" +msgstr "" + +msgid "file create failed" +msgstr "" + +msgid "file write failed" +msgstr "" + +msgid "file read failed" +msgstr "" + +msgid "file close failed" +msgstr "" + +msgid "file seek failed" +msgstr "" + +msgid "file stat failed" +msgstr "" + +msgid "invalid parameter" +msgstr "" + +msgid "invalid filename" +msgstr "" + +msgid "buffer too small" +msgstr "" + +msgid "internal error" +msgstr "" + +msgid "file not found" +msgstr "" + +msgid "archive too large" +msgstr "" + +msgid "validation failed" +msgstr "" + +msgid "write callback failed" +msgstr "" + +#, possible-boost-format +msgid "" +"%1% is too close to exclusion area, there may be collisions when printing." +msgstr "" + +#, possible-boost-format +msgid "%1% is too close to others, and collisions may be caused." +msgstr "" + +#, possible-boost-format +msgid "%1% is too tall, and collisions will be caused." +msgstr "" + +msgid " is too close to others, there may be collisions when printing." +msgstr "" + +msgid " is too close to exclusion area, there may be collisions when printing." +msgstr "" + +msgid "Prime Tower" +msgstr "" + +msgid " is too close to others, and collisions may be caused.\n" +msgstr "" + +msgid " is too close to exclusion area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Can not print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "No extrusions under current settings." +msgstr "" + +msgid "" +"Smooth mode of timelapse is not supported when \"by object\" sequence is " +"enabled." +msgstr "" + +msgid "" +"Please select \"By object\" print sequence to print multiple objects in " +"spiral vase mode." +msgstr "" + +msgid "" +"The spiral vase mode does not work when an object contains more than one " +"materials." +msgstr "" + +#, possible-boost-format +msgid "The object %1% exceeds the maximum build volume height." +msgstr "" + +#, possible-boost-format +msgid "" +"While the object %1% itself fits the build volume, its last layer exceeds " +"the maximum build volume height." +msgstr "" + +msgid "" +"You might want to reduce the size of your model or change current print " +"settings and retry." +msgstr "" + +msgid "Variable layer height is not supported with Organic supports." +msgstr "" + +msgid "" +"Different nozzle diameters and different filament diameters is not allowed " +"when prime tower is enabled." +msgstr "" + +msgid "" +"The Wipe Tower is currently only supported with the relative extruder " +"addressing (use_relative_e_distances=1)." +msgstr "" + +msgid "" +"Ooze prevention is currently not supported with the prime tower enabled." +msgstr "" + +msgid "" +"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " +"RepRapFirmware and Repetier G-code flavors." +msgstr "" + +msgid "The prime tower is not supported in \"By object\" print." +msgstr "" + +msgid "" +"The prime tower is not supported when adaptive layer height is on. It " +"requires that all objects have the same layer height." +msgstr "" + +msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgstr "" + +msgid "The prime tower requires that all objects have the same layer heights" +msgstr "" + +msgid "" +"The prime tower requires that all objects are printed over the same number " +"of raft layers" +msgstr "" + +msgid "" +"The prime tower requires that all objects are sliced with the same layer " +"heights." +msgstr "" + +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + +msgid "Too small line width" +msgstr "" + +msgid "Too large line width" +msgstr "" + +msgid "" +"The prime tower requires that support has the same layer height with object." +msgstr "" + +msgid "" +"Organic support tree tip diameter must not be smaller than support material " +"extrusion width." +msgstr "" + +msgid "" +"Organic support branch diameter must not be smaller than 2x support material " +"extrusion width." +msgstr "" + +msgid "" +"Organic support branch diameter must not be smaller than support tree tip " +"diameter." +msgstr "" + +msgid "" +"Support enforcers are used but support is not enabled. Please enable support." +msgstr "" + +msgid "Layer height cannot exceed nozzle diameter" +msgstr "" + +msgid "" +"Relative extruder addressing requires resetting the extruder position at " +"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " +"layer_gcode." +msgstr "" + +msgid "" +"\"G92 E0\" was found in before_layer_gcode, which is incompatible with " +"absolute extruder addressing." +msgstr "" + +msgid "" +"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " +"extruder addressing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Plate %d: %s does not support filament %s" +msgstr "" + +msgid "" +"Setting the jerk speed too low could lead to artifacts on curved surfaces" +msgstr "" + +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "Generating skirt & brim" +msgstr "" + +msgid "Exporting G-code" +msgstr "" + +msgid "Generating G-code" +msgstr "" + +msgid "Failed processing of the filename_format template." +msgstr "" + +msgid "Printable area" +msgstr "" + +msgid "Bed exclude area" +msgstr "" + +msgid "" +"Unprintable area in XY plane. For example, X1 Series printers use the front " +"left corner to cut filament during filament change. The area is expressed as " +"polygon by points in following format: \"XxY, XxY, ...\"" +msgstr "" + +msgid "Bed custom texture" +msgstr "" + +msgid "Bed custom model" +msgstr "" + +msgid "Elephant foot compensation" +msgstr "" + +msgid "" +"Shrink the initial layer on build plate to compensate for elephant foot " +"effect" +msgstr "" + +msgid "Elephant foot compensation layers" +msgstr "" + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be linearly shrunk less, up to the layer indicated by " +"this value." +msgstr "" + +msgid "layers" +msgstr "" + +msgid "" +"Slicing height for each layer. Smaller layer height means more accurate and " +"more printing time" +msgstr "" + +msgid "Printable height" +msgstr "" + +msgid "Maximum printable height which is limited by mechanism of printer" +msgstr "" + +msgid "Preferred orientation" +msgstr "" + +msgid "Automatically orient stls on the Z-axis upon initial import" +msgstr "" + +msgid "Printer preset names" +msgstr "" + +msgid "Hostname, IP or URL" +msgstr "" + +msgid "" +"Orca Slicer can upload G-code files to a printer host. This field should " +"contain the hostname, IP address or URL of the printer host instance. Print " +"host behind HAProxy with basic auth enabled can be accessed by putting the " +"user name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" +msgstr "" + +msgid "Device UI" +msgstr "" + +msgid "" +"Specify the URL of your device user interface if it's not same as print_host" +msgstr "" + +msgid "API Key / Password" +msgstr "" + +msgid "" +"Orca Slicer can upload G-code files to a printer host. This field should " +"contain the API Key or the password required for authentication." +msgstr "" + +msgid "Name of the printer" +msgstr "" + +msgid "HTTPS CA File" +msgstr "" + +msgid "" +"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " +"in crt/pem format. If left blank, the default OS CA certificate repository " +"is used." +msgstr "" + +msgid "User" +msgstr "" + +msgid "Password" +msgstr "" + +msgid "Ignore HTTPS certificate revocation checks" +msgstr "" + +msgid "" +"Ignore HTTPS certificate revocation checks in case of missing or offline " +"distribution points. One may want to enable this option for self signed " +"certificates if connection fails." +msgstr "" + +msgid "Names of presets related to the physical printer" +msgstr "" + +msgid "Authorization Type" +msgstr "" + +msgid "API key" +msgstr "" + +msgid "HTTP digest" +msgstr "" + +msgid "Avoid crossing wall" +msgstr "" + +msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgstr "" + +msgid "Avoid crossing wall - Max detour length" +msgstr "" + +msgid "" +"Maximum detour distance for avoiding crossing wall. Don't detour if the " +"detour distance is large than this value. Detour length could be specified " +"either as an absolute value or as percentage (for example 50%) of a direct " +"travel path. Zero to disable" +msgstr "" + +msgid "mm or %" +msgstr "" + +msgid "Other layers" +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. Value 0 means the " +"filament does not support to print on the Cool Plate" +msgstr "" + +msgid "°C" +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. Value 0 means the " +"filament does not support to print on the Engineering Plate" +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. Value 0 means the " +"filament does not support to print on the High Temp Plate" +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. Value 0 means the " +"filament does not support to print on the Textured PEI Plate" +msgstr "" + +msgid "Initial layer" +msgstr "" + +msgid "Initial layer bed temperature" +msgstr "" + +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" + +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Engineering Plate" +msgstr "" + +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the High Temp Plate" +msgstr "" + +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Textured PEI Plate" +msgstr "" + +msgid "Bed types supported by the printer" +msgstr "" + +msgid "Cool Plate" +msgstr "" + +msgid "Engineering Plate" +msgstr "" + +msgid "First layer print sequence" +msgstr "" + +msgid "This G-code is inserted at every layer change before lifting z" +msgstr "" + +msgid "Bottom shell layers" +msgstr "" + +msgid "" +"This is the number of solid layers of bottom shell, including the bottom " +"surface layer. When the thickness calculated by this value is thinner than " +"bottom shell thickness, the bottom shell layers will be increased" +msgstr "" + +msgid "Bottom shell thickness" +msgstr "" + +msgid "" +"The number of bottom solid layers is increased when slicing if the thickness " +"calculated by bottom shell layers is thinner than this value. This can avoid " +"having too thin shell when layer height is small. 0 means that this setting " +"is disabled and thickness of bottom shell is absolutely determained by " +"bottom shell layers" +msgstr "" + +msgid "Apply gap fill" +msgstr "" + +msgid "" +"Enables gap fill for the selected surfaces. The minimum gap length that will " +"be filled can be controlled from the filter out tiny gaps option below.\n" +"\n" +"Options:\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +"only\n" +"3. Nowhere: Disables gap fill\n" +msgstr "" + +msgid "Everywhere" +msgstr "" + +msgid "Top and bottom surfaces" +msgstr "" + +msgid "Nowhere" +msgstr "" + +msgid "Force cooling for overhang and bridge" +msgstr "" + +msgid "" +"Enable this option to optimize part cooling fan speed for overhang and " +"bridge to get better cooling" +msgstr "" + +msgid "Fan speed for overhang" +msgstr "" + +msgid "" +"Force part cooling fan to be this speed when printing bridge or overhang " +"wall which has large overhang degree. Forcing cooling for overhang and " +"bridge can get better quality for these part" +msgstr "" + +msgid "Cooling overhang threshold" +msgstr "" + +#, possible-c-format +msgid "" +"Force cooling fan to be specific speed when overhang degree of printed part " +"exceeds this value. Expressed as percentage which indicides how much width " +"of the line without support from lower layer. 0% means forcing cooling for " +"all outer wall no matter how much overhang degree" +msgstr "" + +msgid "Bridge infill direction" +msgstr "" + +msgid "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for " +"external bridges. Use 180°for zero angle." +msgstr "" + +msgid "Bridge density" +msgstr "" + +msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgstr "" + +msgid "Bridge flow ratio" +msgstr "" + +msgid "" +"Decrease this value slightly(for example 0.9) to reduce the amount of " +"material for bridge, to improve sag" +msgstr "" + +msgid "Internal bridge flow ratio" +msgstr "" + +msgid "" +"This value governs the thickness of the internal bridge layer. This is the " +"first layer over sparse infill. Decrease this value slightly (for example " +"0.9) to improve surface quality over sparse infill." +msgstr "" + +msgid "Top surface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for top solid infill. You can " +"decrease it slightly to have smooth surface finish" +msgstr "" + +msgid "Bottom surface flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for bottom solid infill" +msgstr "" + +msgid "Precise wall" +msgstr "" + +msgid "" +"Improve shell precision by adjusting outer wall spacing. This also improves " +"layer consistency.\n" +"Note: This setting will only take effect if the wall sequence is configured " +"to Inner-Outer" +msgstr "" + +msgid "Only one wall on top surfaces" +msgstr "" + +msgid "" +"Use only one wall on flat top surface, to give more space to the top infill " +"pattern" +msgstr "" + +msgid "One wall threshold" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created if you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" + +msgid "Only one wall on first layer" +msgstr "" + +msgid "" +"Use only one wall on first layer, to give more space to the bottom infill " +"pattern" +msgstr "" + +msgid "Extra perimeters on overhangs" +msgstr "" + +msgid "" +"Create additional perimeter paths over steep overhangs and areas where " +"bridges cannot be anchored. " +msgstr "" + +msgid "Reverse on odd" +msgstr "" + +msgid "Overhang reversal" +msgstr "" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on odd layers. This alternating pattern can drastically improve " +"steep overhangs.\n" +"\n" +"This setting can also help reduce part warping due to the reduction of " +"stresses in the part walls." +msgstr "" + +msgid "Reverse only internal perimeters" +msgstr "" + +msgid "" +"Apply the reverse perimeters logic only on internal perimeters. \n" +"\n" +"This setting greatly reduces part stresses as they are now distributed in " +"alternating directions. This should reduce part warping while also " +"maintaining external wall quality. This feature can be very useful for warp " +"prone material, like ABS/ASA, and also for elastic filaments, like TPU and " +"Silk PLA. It can also help reduce warping on floating regions over " +"supports.\n" +"\n" +"For this setting to be the most effective, it is recomended to set the " +"Reverse Threshold to 0 so that all internal walls print in alternating " +"directions on odd layers irrespective of their overhang degree." +msgstr "" + +msgid "Bridge counterbole holes" +msgstr "" + +msgid "" +"This option creates bridges for counterbore holes, allowing them to be " +"printed without support. Available modes include:\n" +"1. None: No bridge is created.\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created." +msgstr "" + +msgid "Partially bridged" +msgstr "" + +msgid "Sacrificial layer" +msgstr "" + +msgid "Reverse threshold" +msgstr "" + +msgid "Overhang reversal threshold" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width.\n" +"Value 0 enables reversal on every odd layers regardless." +msgstr "" + +msgid "Classic mode" +msgstr "" + +msgid "Enable this option to use classic mode" +msgstr "" + +msgid "Slow down for overhang" +msgstr "" + +msgid "Enable this option to slow printing down for different overhang degree" +msgstr "" + +msgid "Slow down for curled perimeters" +msgstr "" + +msgid "" +"Enable this option to slow printing down in areas where potential curled " +"perimeters may exist" +msgstr "" + +msgid "mm/s or %" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Speed of bridge and completely overhang wall" +msgstr "" + +msgid "mm/s" +msgstr "" + +msgid "Internal" +msgstr "" + +msgid "" +"Speed of internal bridge. If the value is expressed as a percentage, it will " +"be calculated based on the bridge_speed. Default value is 150%." +msgstr "" + +msgid "Brim width" +msgstr "" + +msgid "Distance from model to the outermost brim line" +msgstr "" + +msgid "Brim type" +msgstr "" + +msgid "" +"This controls the generation of the brim at outer and/or inner side of " +"models. Auto means the brim width is analysed and calculated automatically." +msgstr "" + +msgid "Brim-object gap" +msgstr "" + +msgid "" +"A gap between innermost brim line and object can make brim be removed more " +"easily" +msgstr "" + +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + +msgid "Compatible machine" +msgstr "" + +msgid "upward compatible machine" +msgstr "" + +msgid "Compatible machine condition" +msgstr "" + +msgid "Compatible process profiles" +msgstr "" + +msgid "Compatible process profiles condition" +msgstr "" + +msgid "Print sequence, layer by layer or object by object" +msgstr "" + +msgid "By layer" +msgstr "" + +msgid "By object" +msgstr "" + +msgid "Intra-layer order" +msgstr "" + +msgid "Print order within a single layer" +msgstr "" + +msgid "As object list" +msgstr "" + +msgid "Slow printing down for better layer cooling" +msgstr "" + +msgid "" +"Enable this option to slow printing speed down to make the final layer time " +"not shorter than the layer time threshold in \"Max fan speed threshold\", so " +"that layer can be cooled for longer time. This can improve the cooling " +"quality for needle and small details" +msgstr "" + +msgid "Normal printing" +msgstr "" + +msgid "" +"The default acceleration of both normal printing and travel except initial " +"layer" +msgstr "" + +msgid "mm/s²" +msgstr "" + +msgid "Default filament profile" +msgstr "" + +msgid "Default filament profile when switch to this machine profile" +msgstr "" + +msgid "Default process profile" +msgstr "" + +msgid "Default process profile when switch to this machine profile" +msgstr "" + +msgid "Activate air filtration" +msgstr "" + +msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" +msgstr "" + +msgid "Fan speed" +msgstr "" + +msgid "" +"Speed of exhaust fan during printing.This speed will overwrite the speed in " +"filament custom gcode" +msgstr "" + +msgid "Speed of exhaust fan after printing completes" +msgstr "" + +msgid "No cooling for the first" +msgstr "" + +msgid "" +"Close all cooling fan for the first certain layers. Cooling fan of the first " +"layer used to be closed to get better build plate adhesion" +msgstr "" + +msgid "Don't support bridges" +msgstr "" + +msgid "" +"Don't support the whole bridge area which make support very large. Bridge " +"usually can be printing directly without support if not very long" +msgstr "" + +msgid "Thick bridges" +msgstr "" + +msgid "" +"If enabled, bridges are more reliable, can bridge longer distances, but may " +"look worse. If disabled, bridges look better but are reliable just for " +"shorter bridged distances." +msgstr "" + +msgid "Thick internal bridges" +msgstr "" + +msgid "" +"If enabled, thick internal bridges will be used. It's usually recommended to " +"have this feature turned on. However, consider turning it off if you are " +"using large nozzles." +msgstr "" + +msgid "Don't filter out small internal bridges (beta)" +msgstr "" + +msgid "" +"This option can help reducing pillowing on top surfaces in heavily slanted " +"or curved models.\n" +"\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality. \n" +"\n" +"However, in heavily slanted or curved models especially where too low sparse " +"infill density is used, this may result in curling of the unsupported solid " +"infill, causing pillowing.\n" +"\n" +"Enabling this option will print internal bridge layer over slightly " +"unsupported internal solid infill. The options below control the amount of " +"filtering, i.e. the amount of internal bridges created.\n" +"\n" +"Disabled - Disables this option. This is the default behaviour and works " +"well in most cases.\n" +"\n" +"Limited filtering - Creates internal bridges on heavily slanted surfaces, " +"while avoiding creating uncessesary interal bridges. This works well for " +"most difficult models.\n" +"\n" +"No filtering - Creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models. " +"However, in most cases it creates too many unecessary bridges." +msgstr "" + +msgid "Disabled" +msgstr "" + +msgid "Limited filtering" +msgstr "" + +msgid "No filtering" +msgstr "" + +msgid "Max bridge length" +msgstr "" + +msgid "" +"Max length of bridges that don't need support. Set it to 0 if you want all " +"bridges to be supported, and set it to a very large value if you don't want " +"any bridges to be supported." +msgstr "" + +msgid "End G-code" +msgstr "" + +msgid "End G-code when finish the whole printing" +msgstr "" + +msgid "Between Object Gcode" +msgstr "" + +msgid "" +"Insert Gcode between objects. This parameter will only come into effect when " +"you print your models object by object" +msgstr "" + +msgid "End G-code when finish the printing of this filament" +msgstr "" + +msgid "Ensure vertical shell thickness" +msgstr "" + +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." +msgstr "" + +msgid "Critical Only" +msgstr "" + +msgid "Moderate" +msgstr "" + +msgid "Top surface pattern" +msgstr "" + +msgid "Line pattern of top surface infill" +msgstr "" + +msgid "Concentric" +msgstr "" + +msgid "Rectilinear" +msgstr "" + +msgid "Monotonic" +msgstr "" + +msgid "Monotonic line" +msgstr "" + +msgid "Aligned Rectilinear" +msgstr "" + +msgid "Hilbert Curve" +msgstr "" + +msgid "Archimedean Chords" +msgstr "" + +msgid "Octagram Spiral" +msgstr "" + +msgid "Bottom surface pattern" +msgstr "" + +msgid "Line pattern of bottom surface infill, not bridge infill" +msgstr "" + +msgid "Internal solid infill pattern" +msgstr "" + +msgid "" +"Line pattern of internal solid infill. if the detect narrow internal solid " +"infill be enabled, the concentric pattern will be used for the small area." +msgstr "" + +msgid "" +"Line width of outer wall. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" + +msgid "" +"Speed of outer wall which is outermost and visible. It's used to be slower " +"than inner wall speed to get better quality." +msgstr "" + +msgid "Small perimeters" +msgstr "" + +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"small_perimeter_threshold (usually holes). If expressed as percentage (for " +"example: 80%) it will be calculated on the outer wall speed setting above. " +"Set to zero for auto." +msgstr "" + +msgid "Small perimeters threshold" +msgstr "" + +msgid "" +"This sets the threshold for small perimeter length. Default threshold is 0mm" +msgstr "" + +msgid "Walls printing order" +msgstr "" + +msgid "" +"Print sequence of the internal (inner) and external (outer) walls. \n" +"\n" +"Use Inner/Outer for best overhangs. This is because the overhanging walls " +"can adhere to a neighouring perimeter while printing. However, this option " +"results in slightly reduced surface quality as the external perimeter is " +"deformed by being squashed to the internal perimeter.\n" +"\n" +"Use Inner/Outer/Inner for the best external surface finish and dimensional " +"accuracy as the external wall is printed undisturbed from an internal " +"perimeter. However, overhang performance will reduce as there is no internal " +"perimeter to print the external wall against. This option requires a minimum " +"of 3 walls to be effective as it prints the internal walls from the 3rd " +"perimeter onwards first, then the external perimeter and, finally, the first " +"internal perimeter. This option is recomended against the Outer/Inner option " +"in most cases. \n" +"\n" +"Use Outer/Inner for the same external wall quality and dimensional accuracy " +"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"consistent as the first extrusion of a new layer starts on a visible " +"surface.\n" +"\n" +" " +msgstr "" + +msgid "Inner/Outer" +msgstr "" + +msgid "Outer/Inner" +msgstr "" + +msgid "Inner/Outer/Inner" +msgstr "" + +msgid "Print infill first" +msgstr "" + +msgid "" +"Order of wall/infill. When the tickbox is unchecked the walls are printed " +"first, which works best in most cases.\n" +"\n" +"Printing walls first may help with extreme overhangs as the walls have the " +"neighbouring infill to adhere to. However, the infill will slighly push out " +"the printed walls where it is attached to them, resulting in a worse " +"external surface finish. It can also cause the infill to shine through the " +"external surfaces of the part." +msgstr "" + +msgid "Wall loop direction" +msgstr "" + +msgid "" +"The direction which the wall loops are extruded when looking down from the " +"top.\n" +"\n" +"By default all walls are extruded in counter-clockwise, unless Reverse on " +"odd is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on odd.\n" +"\n" +"This option will be disabled if sprial vase mode is enabled." +msgstr "" + +msgid "Counter clockwise" +msgstr "" + +msgid "Clockwise" +msgstr "" + +msgid "Height to rod" +msgstr "" + +msgid "" +"Distance of the nozzle tip to the lower rod. Used for collision avoidance in " +"by-object printing." +msgstr "" + +msgid "Height to lid" +msgstr "" + +msgid "" +"Distance of the nozzle tip to the lid. Used for collision avoidance in by-" +"object printing." +msgstr "" + +msgid "" +"Clearance radius around extruder. Used for collision avoidance in by-object " +"printing." +msgstr "" + +msgid "Bed mesh min" +msgstr "" + +msgid "" +"This option sets the min point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. OrcaSlicer " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (-99999, -99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" + +msgid "Bed mesh max" +msgstr "" + +msgid "" +"This option sets the max point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. OrcaSlicer " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (99999, 99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" + +msgid "Probe point distance" +msgstr "" + +msgid "" +"This option sets the preferred distance between probe points (grid size) for " +"the X and Y directions, with the default being 50mm for both X and Y." +msgstr "" + +msgid "Mesh margin" +msgstr "" + +msgid "" +"This option determines the additional distance by which the adaptive bed " +"mesh area should be expanded in the XY directions." +msgstr "" + +msgid "Extruder Color" +msgstr "" + +msgid "Only used as a visual help on UI" +msgstr "" + +msgid "Extruder offset" +msgstr "" + +msgid "Flow ratio" +msgstr "" + +msgid "" +"The material may have volumetric change after switching between molten state " +"and crystalline state. This setting changes all extrusion flow of this " +"filament in gcode proportionally. Recommended value range is between 0.95 " +"and 1.05. Maybe you can tune this value to get nice flat surface when there " +"has slight overflow or underflow" +msgstr "" + +msgid "Enable pressure advance" +msgstr "" + +msgid "" +"Enable pressure advance, auto calibration result will be overwriten once " +"enabled." +msgstr "" + +msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgstr "" + +msgid "" +"Default line width if other line widths are set to 0. If expressed as a %, " +"it will be computed over the nozzle diameter." +msgstr "" + +msgid "Keep fan always on" +msgstr "" + +msgid "" +"If enable this setting, part cooling fan will never be stoped and will run " +"at least at minimum speed to reduce the frequency of starting and stoping" +msgstr "" + +msgid "Layer time" +msgstr "" + +msgid "" +"Part cooling fan will be enabled for layers of which estimated time is " +"shorter than this value. Fan speed is interpolated between the minimum and " +"maximum fan speeds according to layer printing time" +msgstr "" + +msgid "Default color" +msgstr "" + +msgid "Default filament color" +msgstr "" + +msgid "Filament notes" +msgstr "" + +msgid "You can put your notes regarding the filament here." +msgstr "" + +msgid "Required nozzle HRC" +msgstr "" + +msgid "" +"Minimum HRC of nozzle required to print the filament. Zero means no checking " +"of nozzle's HRC." +msgstr "" + +msgid "" +"This setting stands for how much volume of filament can be melted and " +"extruded per second. Printing speed is limited by max volumetric speed, in " +"case of too high and unreasonable speed setting. Can't be zero" +msgstr "" + +msgid "mm³/s" +msgstr "" + +msgid "Filament load time" +msgstr "" + +msgid "Time to load new filament when switch filament. For statistics only" +msgstr "" + +msgid "Filament unload time" +msgstr "" + +msgid "Time to unload old filament when switch filament. For statistics only" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in gcode, so it's important " +"and should be accurate" +msgstr "" + +msgid "Shrinkage" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" + +msgid "Loading speed" +msgstr "" + +msgid "Speed used for loading the filament on the wipe tower." +msgstr "" + +msgid "Loading speed at the start" +msgstr "" + +msgid "Speed used at the very beginning of loading phase." +msgstr "" + +msgid "Unloading speed" +msgstr "" + +msgid "" +"Speed used for unloading the filament on the wipe tower (does not affect " +"initial part of unloading just after ramming)." +msgstr "" + +msgid "Unloading speed at the start" +msgstr "" + +msgid "" +"Speed used for unloading the tip of the filament immediately after ramming." +msgstr "" + +msgid "Delay after unloading" +msgstr "" + +msgid "" +"Time to wait after the filament is unloaded. May help to get reliable " +"toolchanges with flexible materials that may need more time to shrink to " +"original dimensions." +msgstr "" + +msgid "Number of cooling moves" +msgstr "" + +msgid "" +"Filament is cooled by being moved back and forth in the cooling tubes. " +"Specify desired number of these moves." +msgstr "" + +msgid "Speed of the first cooling move" +msgstr "" + +msgid "Cooling moves are gradually accelerating beginning at this speed." +msgstr "" + +msgid "Minimal purge on wipe tower" +msgstr "" + +msgid "" +"After a tool change, the exact position of the newly loaded filament inside " +"the nozzle may not be known, and the filament pressure is likely not yet " +"stable. Before purging the print head into an infill or a sacrificial " +"object, Orca Slicer will always prime this amount of material into the wipe " +"tower to produce successive infill or sacrificial object extrusions reliably." +msgstr "" + +msgid "Speed of the last cooling move" +msgstr "" + +msgid "Cooling moves are gradually accelerating towards this speed." +msgstr "" + +msgid "" +"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " +"filament during a tool change (when executing the T code). This time is " +"added to the total print time by the G-code time estimator." +msgstr "" + +msgid "Ramming parameters" +msgstr "" + +msgid "" +"This string is edited by RammingDialog and contains ramming specific " +"parameters." +msgstr "" + +msgid "" +"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " +"filament during a tool change (when executing the T code). This time is " +"added to the total print time by the G-code time estimator." +msgstr "" + +msgid "Enable ramming for multitool setups" +msgstr "" + +msgid "" +"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " +"Multimaterial' in Printer Settings is unchecked). When checked, a small " +"amount of filament is rapidly extruded on the wipe tower just before the " +"toolchange. This option is only used when the wipe tower is enabled." +msgstr "" + +msgid "Multitool ramming volume" +msgstr "" + +msgid "The volume to be rammed before the toolchange." +msgstr "" + +msgid "Multitool ramming flow" +msgstr "" + +msgid "Flow used for ramming the filament before the toolchange." +msgstr "" + +msgid "Density" +msgstr "" + +msgid "Filament density. For statistics only" +msgstr "" + +msgid "g/cm³" +msgstr "" + +msgid "The material type of filament" +msgstr "" + +msgid "Soluble material" +msgstr "" + +msgid "" +"Soluble material is commonly used to print support and support interface" +msgstr "" + +msgid "Support material" +msgstr "" + +msgid "" +"Support material is commonly used to print support and support interface" +msgstr "" + +msgid "Softening temperature" +msgstr "" + +msgid "" +"The material softens at this temperature, so when the bed temperature is " +"equal to or greater than it, it's highly recommended to open the front door " +"and/or remove the upper glass to avoid cloggings." +msgstr "" + +msgid "Price" +msgstr "" + +msgid "Filament price. For statistics only" +msgstr "" + +msgid "money/kg" +msgstr "" + +msgid "Vendor" +msgstr "" + +msgid "Vendor of filament. For show only" +msgstr "" + +msgid "(Undefined)" +msgstr "" + +msgid "Infill direction" +msgstr "" + +msgid "" +"Angle for sparse infill pattern, which controls the start or main direction " +"of line" +msgstr "" + +msgid "Sparse infill density" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Density of internal sparse infill, 100% turns all sparse infill into solid " +"infill and internal solid infill pattern will be used" +msgstr "" + +msgid "Sparse infill pattern" +msgstr "" + +msgid "Line pattern for internal sparse infill" +msgstr "" + +msgid "Grid" +msgstr "" + +msgid "Line" +msgstr "" + +msgid "Cubic" +msgstr "" + +msgid "Tri-hexagon" +msgstr "" + +msgid "Gyroid" +msgstr "" + +msgid "Honeycomb" +msgstr "" + +msgid "Adaptive Cubic" +msgstr "" + +msgid "3D Honeycomb" +msgstr "" + +msgid "Support Cubic" +msgstr "" + +msgid "Lightning" +msgstr "" + +msgid "Sparse infill anchor length" +msgstr "" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Orca Slicer tries to connect two " +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than infill_anchor_max is found, the infill line is " +"connected to a perimeter segment at just one side and the length of the " +"perimeter segment taken is limited to this parameter, but no longer than " +"anchor_length_max. \n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" + +msgid "0 (no open anchors)" +msgstr "" + +msgid "1000 (unlimited)" +msgstr "" + +msgid "Maximum length of the infill anchor" +msgstr "" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Orca Slicer tries to connect two " +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than this parameter is found, the infill line is connected " +"to a perimeter segment at just one side and the length of the perimeter " +"segment taken is limited to infill_anchor, but no longer than this " +"parameter. \n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" + +msgid "0 (Simple connect)" +msgstr "" + +msgid "Acceleration of outer walls" +msgstr "" + +msgid "Acceleration of inner walls" +msgstr "" + +msgid "Acceleration of travel moves" +msgstr "" + +msgid "" +"Acceleration of top surface infill. Using a lower value may improve top " +"surface quality" +msgstr "" + +msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgstr "" + +msgid "" +"Acceleration of bridges. If the value is expressed as a percentage (e.g. " +"50%), it will be calculated based on the outer wall acceleration." +msgstr "" + +msgid "mm/s² or %" +msgstr "" + +msgid "" +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." +msgstr "" + +msgid "" +"Acceleration of internal solid infill. If the value is expressed as a " +"percentage (e.g. 100%), it will be calculated based on the default " +"acceleration." +msgstr "" + +msgid "" +"Acceleration of initial layer. Using a lower value can improve build plate " +"adhesive" +msgstr "" + +msgid "Enable accel_to_decel" +msgstr "" + +msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgstr "" + +msgid "accel_to_decel" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +msgstr "" + +msgid "Jerk of outer walls" +msgstr "" + +msgid "Jerk of inner walls" +msgstr "" + +msgid "Jerk for top surface" +msgstr "" + +msgid "Jerk for infill" +msgstr "" + +msgid "Jerk for initial layer" +msgstr "" + +msgid "Jerk for travel" +msgstr "" + +msgid "" +"Line width of initial layer. If expressed as a %, it will be computed over " +"the nozzle diameter." +msgstr "" + +msgid "Initial layer height" +msgstr "" + +msgid "" +"Height of initial layer. Making initial layer height to be thick slightly " +"can improve build plate adhension" +msgstr "" + +msgid "Speed of initial layer except the solid infill part" +msgstr "" + +msgid "Initial layer infill" +msgstr "" + +msgid "Speed of solid infill part of initial layer" +msgstr "" + +msgid "Initial layer travel speed" +msgstr "" + +msgid "Travel speed of initial layer" +msgstr "" + +msgid "Number of slow layers" +msgstr "" + +msgid "" +"The first few layers are printed slower than normal. The speed is gradually " +"increased in a linear fashion over the specified number of layers." +msgstr "" + +msgid "Initial layer nozzle temperature" +msgstr "" + +msgid "Nozzle temperature to print initial layer when using this filament" +msgstr "" + +msgid "Full fan speed at layer" +msgstr "" + +msgid "" +"Fan speed will be ramped up linearly from zero at layer " +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +msgstr "" + +msgid "Support interface fan speed" +msgstr "" + +msgid "" +"This fan speed is enforced during all support interfaces, to be able to " +"weaken their bonding with a high fan speed.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" + +msgid "" +"Randomly jitter while printing the wall, so that the surface has a rough " +"look. This setting controls the fuzzy position" +msgstr "" + +msgid "Contour" +msgstr "" + +msgid "Contour and hole" +msgstr "" + +msgid "All walls" +msgstr "" + +msgid "Fuzzy skin thickness" +msgstr "" + +msgid "" +"The width within which to jitter. It's adversed to be below outer wall line " +"width" +msgstr "" + +msgid "Fuzzy skin point distance" +msgstr "" + +msgid "" +"The average diatance between the random points introducded on each line " +"segment" +msgstr "" + +msgid "Apply fuzzy skin to first layer" +msgstr "" + +msgid "Whether to apply fuzzy skin on the first layer" +msgstr "" + +msgid "Filter out tiny gaps" +msgstr "" + +msgid "Layers and Perimeters" +msgstr "" + +msgid "Filter out gaps smaller than the threshold specified" +msgstr "" + +msgid "" +"Speed of gap infill. Gap usually has irregular line width and should be " +"printed more slowly" +msgstr "" + +msgid "Arc fitting" +msgstr "" + +msgid "" +"Enable this to get a G-code file which has G2 and G3 moves. And the fitting " +"tolerance is same with resolution" +msgstr "" + +msgid "Add line number" +msgstr "" + +msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgstr "" + +msgid "Scan first layer" +msgstr "" + +msgid "" +"Enable this to enable the camera on printer to check the quality of first " +"layer" +msgstr "" + +msgid "Nozzle type" +msgstr "" + +msgid "" +"The metallic material of nozzle. This determines the abrasive resistance of " +"nozzle, and what kind of filament can be printed" +msgstr "" + +msgid "Undefine" +msgstr "" + +msgid "Hardened steel" +msgstr "" + +msgid "Stainless steel" +msgstr "" + +msgid "Brass" +msgstr "" + +msgid "Nozzle HRC" +msgstr "" + +msgid "" +"The nozzle's hardness. Zero means no checking for nozzle's hardness during " +"slicing." +msgstr "" + +msgid "HRC" +msgstr "" + +msgid "Printer structure" +msgstr "" + +msgid "The physical arrangement and components of a printing device" +msgstr "" + +msgid "CoreXY" +msgstr "" + +msgid "I3" +msgstr "" + +msgid "Hbot" +msgstr "" + +msgid "Delta" +msgstr "" + +msgid "Best object position" +msgstr "" + +msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." +msgstr "" + +msgid "" +"Enable this option if machine has auxiliary part cooling fan. G-code " +"command: M106 P2 S(0-255)." +msgstr "" + +msgid "" +"Start the fan this number of seconds earlier than its target start time (you " +"can use fractional seconds). It assumes infinite acceleration for this time " +"estimation, and will only take into account G1 and G0 moves (arc fitting is " +"unsupported).\n" +"It won't move fan comands from custom gcodes (they act as a sort of " +"'barrier').\n" +"It won't move fan comands into the start gcode if the 'only custom start " +"gcode' is activated.\n" +"Use 0 to deactivate." +msgstr "" + +msgid "Only overhangs" +msgstr "" + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "" + +msgid "Fan kick-start time" +msgstr "" + +msgid "" +"Emit a max fan speed command for this amount of seconds before reducing to " +"target speed to kick-start the cooling fan.\n" +"This is useful for fans where a low PWM/power may be insufficient to get the " +"fan started spinning from a stop, or to get the fan up to speed faster.\n" +"Set to 0 to deactivate." +msgstr "" + +msgid "Time cost" +msgstr "" + +msgid "The printer cost per hour" +msgstr "" + +msgid "money/h" +msgstr "" + +msgid "Support control chamber temperature" +msgstr "" + +msgid "" +"This option is enabled if machine support controlling chamber temperature\n" +"G-code command: M141 S(0-255)" +msgstr "" + +msgid "Support air filtration" +msgstr "" + +msgid "" +"Enable this if printer support air filtration\n" +"G-code command: M106 P3 S(0-255)" +msgstr "" + +msgid "G-code flavor" +msgstr "" + +msgid "What kind of gcode the printer is compatible with" +msgstr "" + +msgid "Klipper" +msgstr "" + +msgid "Support multi bed types" +msgstr "" + +msgid "Enable this option if you want to use multiple bed types" +msgstr "" + +msgid "Label objects" +msgstr "" + +msgid "" +"Enable this to add comments into the G-Code labeling print moves with what " +"object they belong to, which is useful for the Octoprint CancelObject " +"plugin. This settings is NOT compatible with Single Extruder Multi Material " +"setup and Wipe into Object / Wipe into Infill." +msgstr "" + +msgid "Exclude objects" +msgstr "" + +msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgstr "" + +msgid "Verbose G-code" +msgstr "" + +msgid "" +"Enable this to get a commented G-code file, with each line explained by a " +"descriptive text. If you print from SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" + +msgid "Infill combination" +msgstr "" + +msgid "" +"Automatically Combine sparse infill of several layers to print together to " +"reduce time. Wall is still printed with original layer height." +msgstr "" + +msgid "Filament to print internal sparse infill." +msgstr "" + +msgid "" +"Line width of internal sparse infill. If expressed as a %, it will be " +"computed over the nozzle diameter." +msgstr "" + +msgid "Infill/Wall overlap" +msgstr "" + +msgid "" +"Infill area is enlarged slightly to overlap with wall for better bonding. " +"The percentage value is relative to line width of sparse infill" +msgstr "" + +msgid "Speed of internal sparse infill" +msgstr "" + +msgid "Interface shells" +msgstr "" + +msgid "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material" +msgstr "" + +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Ironing Type" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of surface again to make " +"flat surface more smooth. This setting controls which layer being ironed" +msgstr "" + +msgid "No ironing" +msgstr "" + +msgid "Top surfaces" +msgstr "" + +msgid "Topmost surface" +msgstr "" + +msgid "All solid layer" +msgstr "" + +msgid "Ironing Pattern" +msgstr "" + +msgid "The pattern that will be used when ironing" +msgstr "" + +msgid "Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"layer height. Too high value results in overextrusion on the surface" +msgstr "" + +msgid "Ironing line spacing" +msgstr "" + +msgid "The distance between the lines of ironing" +msgstr "" + +msgid "Ironing speed" +msgstr "" + +msgid "Print speed of ironing lines" +msgstr "" + +msgid "Ironing angle" +msgstr "" + +msgid "" +"The angle ironing is done at. A negative number disables this function and " +"uses the default method." +msgstr "" + +msgid "This gcode part is inserted at every layer change after lift z" +msgstr "" + +msgid "Supports silent mode" +msgstr "" + +msgid "" +"Whether the machine supports silent mode in which machine use lower " +"acceleration to print" +msgstr "" + +msgid "Emit limits to G-code" +msgstr "" + +msgid "Machine limits" +msgstr "" + +msgid "" +"If enabled, the machine limits will be emitted to G-code file.\n" +"This option will be ignored if the g-code flavor is set to Klipper." +msgstr "" + +msgid "" +"This G-code will be used as a code for the pause print. User can insert " +"pause G-code in gcode viewer" +msgstr "" + +msgid "This G-code will be used as a custom code" +msgstr "" + +msgid "Small area flow compensation (beta)" +msgstr "" + +msgid "Enable flow compensation for small infill areas" +msgstr "" + +msgid "Flow Compensation Model" +msgstr "" + +msgid "" +"Flow Compensation Model, used to adjust the flow for small infill areas. The " +"model is expressed as a comma separated pair of values for extrusion length " +"and flow correction factors, one per line, in the following format: " +"\"1.234,5.678\"" +msgstr "" + +msgid "Maximum speed X" +msgstr "" + +msgid "Maximum speed Y" +msgstr "" + +msgid "Maximum speed Z" +msgstr "" + +msgid "Maximum speed E" +msgstr "" + +msgid "Maximum X speed" +msgstr "" + +msgid "Maximum Y speed" +msgstr "" + +msgid "Maximum Z speed" +msgstr "" + +msgid "Maximum E speed" +msgstr "" + +msgid "Maximum acceleration X" +msgstr "" + +msgid "Maximum acceleration Y" +msgstr "" + +msgid "Maximum acceleration Z" +msgstr "" + +msgid "Maximum acceleration E" +msgstr "" + +msgid "Maximum acceleration of the X axis" +msgstr "" + +msgid "Maximum acceleration of the Y axis" +msgstr "" + +msgid "Maximum acceleration of the Z axis" +msgstr "" + +msgid "Maximum acceleration of the E axis" +msgstr "" + +msgid "Maximum jerk X" +msgstr "" + +msgid "Maximum jerk Y" +msgstr "" + +msgid "Maximum jerk Z" +msgstr "" + +msgid "Maximum jerk E" +msgstr "" + +msgid "Maximum jerk of the X axis" +msgstr "" + +msgid "Maximum jerk of the Y axis" +msgstr "" + +msgid "Maximum jerk of the Z axis" +msgstr "" + +msgid "Maximum jerk of the E axis" +msgstr "" + +msgid "Minimum speed for extruding" +msgstr "" + +msgid "Minimum speed for extruding (M205 S)" +msgstr "" + +msgid "Minimum travel speed" +msgstr "" + +msgid "Minimum travel speed (M205 T)" +msgstr "" + +msgid "Maximum acceleration for extruding" +msgstr "" + +msgid "Maximum acceleration for extruding (M204 P)" +msgstr "" + +msgid "Maximum acceleration for retracting" +msgstr "" + +msgid "Maximum acceleration for retracting (M204 R)" +msgstr "" + +msgid "Maximum acceleration for travel" +msgstr "" + +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed limitation of part cooling fan" +msgstr "" + +msgid "Max" +msgstr "" + +msgid "" +"The largest printable layer height for extruder. Used tp limits the maximum " +"layer hight when enable adaptive layer height" +msgstr "" + +msgid "Extrusion rate smoothing" +msgstr "" + +msgid "" +"This parameter smooths out sudden extrusion rate changes that happen when " +"the printer transitions from printing a high flow (high speed/larger width) " +"extrusion to a lower flow (lower speed/smaller width) extrusion and vice " +"versa.\n" +"\n" +"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"can change over time. Higher values mean higher extrusion rate changes are " +"allowed, resulting in faster speed transitions.\n" +"\n" +"A value of 0 disables the feature. \n" +"\n" +"For a high speed, high flow direct drive printer (like the Bambu lab or " +"Voron) this value is usually not needed. However it can provide some " +"marginal benefit in certain cases where feature speeds vary greatly. For " +"example, when there are aggressive slowdowns due to overhangs. In these " +"cases a high value of around 300-350mm3/s2 is recommended as this allows for " +"just enough smoothing to assist pressure advance achieve a smoother flow " +"transition.\n" +"\n" +"For slower printers without pressure advance, the value should be set much " +"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " +"extruders and 5-10mm3/s2 for Bowden style. \n" +"\n" +"This feature is known as Pressure Equalizer in Prusa slicer.\n" +"\n" +"Note: this parameter disables arc fitting." +msgstr "" + +msgid "mm³/s²" +msgstr "" + +msgid "Smoothing segment length" +msgstr "" + +msgid "" +"A lower value results in smoother extrusion rate transitions. However, this " +"results in a significantly larger gcode file and more instructions for the " +"printer to process. \n" +"\n" +"Default value of 3 works well for most cases. If your printer is stuttering, " +"increase this value to reduce the number of adjustments made\n" +"\n" +"Allowed values: 1-5" +msgstr "" + +msgid "Minimum speed for part cooling fan" +msgstr "" + +msgid "" +"Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " +"during printing except the first several layers which is defined by no " +"cooling layers.\n" +"Please enable auxiliary_fan in printer settings to use this feature. G-code " +"command: M106 P2 S(0-255)" +msgstr "" + +msgid "Min" +msgstr "" + +msgid "" +"The lowest printable layer height for extruder. Used tp limits the minimum " +"layer hight when enable adaptive layer height" +msgstr "" + +msgid "Min print speed" +msgstr "" + +msgid "" +"The minimum printing speed that the printer will slow down to to attempt to " +"maintain the minimum layer time above, when slow down for better layer " +"cooling is enabled." +msgstr "" + +msgid "Nozzle diameter" +msgstr "" + +msgid "Diameter of nozzle" +msgstr "" + +msgid "Configuration notes" +msgstr "" + +msgid "" +"You can put here your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" + +msgid "Host Type" +msgstr "" + +msgid "" +"Orca Slicer can upload G-code files to a printer host. This field must " +"contain the kind of the host." +msgstr "" + +msgid "Nozzle volume" +msgstr "" + +msgid "Volume of nozzle between the cutter and the end of nozzle" +msgstr "" + +msgid "Cooling tube position" +msgstr "" + +msgid "Distance of the center-point of the cooling tube from the extruder tip." +msgstr "" + +msgid "Cooling tube length" +msgstr "" + +msgid "Length of the cooling tube to limit space for cooling moves inside it." +msgstr "" + +msgid "High extruder current on filament swap" +msgstr "" + +msgid "" +"It may be beneficial to increase the extruder motor current during the " +"filament exchange sequence to allow for rapid ramming feed rates and to " +"overcome resistance when loading a filament with an ugly shaped tip." +msgstr "" + +msgid "Filament parking position" +msgstr "" + +msgid "" +"Distance of the extruder tip from the position where the filament is parked " +"when unloaded. This should match the value in printer firmware." +msgstr "" + +msgid "Extra loading distance" +msgstr "" + +msgid "" +"When set to zero, the distance the filament is moved from parking position " +"during load is exactly the same as it was moved back during unload. When " +"positive, it is loaded further, if negative, the loading move is shorter " +"than unloading." +msgstr "" + +msgid "Start end points" +msgstr "" + +msgid "The start and end points which is from cutter area to garbage can." +msgstr "" + +msgid "Reduce infill retraction" +msgstr "" + +msgid "" +"Don't retract when the travel is in infill area absolutely. That means the " +"oozing can't been seen. This can reduce times of retraction for complex " +"model and save printing time, but make slicing and G-code generating slower" +msgstr "" + +msgid "Filename format" +msgstr "" + +msgid "User can self-define the project file name when export" +msgstr "" + +msgid "Make overhangs printable" +msgstr "" + +msgid "Modify the geometry to print overhangs without support material." +msgstr "" + +msgid "Make overhangs printable - Maximum angle" +msgstr "" + +msgid "" +"Maximum angle of overhangs to allow after making more steep overhangs " +"printable.90° will not change the model at all and allow any overhang, while " +"0 will replace all overhangs with conical material." +msgstr "" + +msgid "Make overhangs printable - Hole area" +msgstr "" + +msgid "" +"Maximum area of a hole in the base of the model before it's filled by " +"conical material.A value of 0 will fill all the holes in the model base." +msgstr "" + +msgid "mm²" +msgstr "" + +msgid "Detect overhang wall" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Detect the overhang percentage relative to line width and use different " +"speed to print. For 100%% overhang, bridge speed is used." +msgstr "" + +msgid "" +"Line width of inner wall. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" + +msgid "Speed of inner wall" +msgstr "" + +msgid "Number of walls of every layer" +msgstr "" + +msgid "Alternate extra wall" +msgstr "" + +msgid "" +"This setting adds an extra wall to every other layer. This way the infill " +"gets wedged vertically between the walls, resulting in stronger prints. \n" +"\n" +"When this option is enabled, the ensure vertical shell thickness option " +"needs to be disabled. \n" +"\n" +"Using lightning infill together with this option is not recommended as there " +"is limited infill to anchor the extra perimeters to." +msgstr "" + +msgid "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Orca Slicer config settings by reading " +"environment variables." +msgstr "" + +msgid "Printer notes" +msgstr "" + +msgid "You can put your notes regarding the printer here." +msgstr "" + +msgid "Raft contact Z distance" +msgstr "" + +msgid "Z gap between object and raft. Ignored for soluble interface" +msgstr "" + +msgid "Raft expansion" +msgstr "" + +msgid "Expand all raft layers in XY plane" +msgstr "" + +msgid "Initial layer density" +msgstr "" + +msgid "Density of the first raft or support layer" +msgstr "" + +msgid "Initial layer expansion" +msgstr "" + +msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgstr "" + +msgid "Raft layers" +msgstr "" + +msgid "" +"Object will be raised by this number of support layers. Use this function to " +"avoid wrapping when print ABS" +msgstr "" + +msgid "" +"G-code path is genereated after simplifing the contour of model to avoid too " +"much points and gcode lines in gcode file. Smaller value means higher " +"resolution and more time to slice" +msgstr "" + +msgid "Travel distance threshold" +msgstr "" + +msgid "" +"Only trigger retraction when the travel distance is longer than this " +"threshold" +msgstr "" + +msgid "Retract amount before wipe" +msgstr "" + +msgid "" +"The length of fast retraction before wipe, relative to retraction length" +msgstr "" + +msgid "Retract when change layer" +msgstr "" + +msgid "Force a retraction when changes layer" +msgstr "" + +msgid "Retraction Length" +msgstr "" + +msgid "" +"Some amount of material in extruder is pulled back to avoid ooze during long " +"travel. Set zero to disable retraction" +msgstr "" + +msgid "Z hop when retract" +msgstr "" + +msgid "" +"Whenever the retraction is done, the nozzle is lifted a little to create " +"clearance between nozzle and the print. It prevents nozzle from hitting the " +"print when travel move. Using spiral line to lift z can prevent stringing" +msgstr "" + +msgid "Z hop lower boundary" +msgstr "" + +msgid "" +"Z hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z hop upper boundary\"" +msgstr "" + +msgid "Z hop upper boundary" +msgstr "" + +msgid "" +"If this value is positive, Z hop will only come into effect when Z is above " +"the parameter: \"Z hop lower boundary\" and is below this value" +msgstr "" + +msgid "Z hop type" +msgstr "" + +msgid "Slope" +msgstr "" + +msgid "Spiral" +msgstr "" + +msgid "Only lift Z above" +msgstr "" + +msgid "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z." +msgstr "" + +msgid "Only lift Z below" +msgstr "" + +msgid "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z." +msgstr "" + +msgid "On surfaces" +msgstr "" + +msgid "" +"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"lift Z above/below)." +msgstr "" + +msgid "All Surfaces" +msgstr "" + +msgid "Top Only" +msgstr "" + +msgid "Bottom Only" +msgstr "" + +msgid "Top and Bottom" +msgstr "" + +msgid "Extra length on restart" +msgstr "" + +msgid "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." +msgstr "" + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament." +msgstr "" + +msgid "Retraction Speed" +msgstr "" + +msgid "Speed of retractions" +msgstr "" + +msgid "Deretraction Speed" +msgstr "" + +msgid "" +"Speed for reloading filament into extruder. Zero means same speed with " +"retraction" +msgstr "" + +msgid "Use firmware retraction" +msgstr "" + +msgid "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." +msgstr "" + +msgid "Show auto-calibration marks" +msgstr "" + +msgid "Disable set remaining print time" +msgstr "" + +msgid "Seam position" +msgstr "" + +msgid "The start position to print each part of outer wall" +msgstr "" + +msgid "Nearest" +msgstr "" + +msgid "Aligned" +msgstr "" + +msgid "Back" +msgstr "" + +msgid "Random" +msgstr "" + +msgid "Staggered inner seams" +msgstr "" + +msgid "" +"This option causes the inner seams to be shifted backwards based on their " +"depth, forming a zigzag pattern." +msgstr "" + +msgid "Seam gap" +msgstr "" + +msgid "" +"In order to reduce the visibility of the seam in a closed loop extrusion, " +"the loop is interrupted and shortened by a specified amount.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current extruder diameter. The default value for this parameter is 10%." +msgstr "" + +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + +msgid "Role base wipe speed" +msgstr "" + +msgid "" +"The wipe speed is determined by the speed of the current extrusion role.e.g. " +"if a wipe action is executed immediately following an outer wall extrusion, " +"the speed of the outer wall extrusion will be utilized for the wipe action." +msgstr "" + +msgid "Wipe on loops" +msgstr "" + +msgid "" +"To minimize the visibility of the seam in a closed loop extrusion, a small " +"inward movement is executed before the extruder leaves the loop." +msgstr "" + +msgid "Wipe before external loop" +msgstr "" + +msgid "" +"To minimise visibility of potential overextrusion at the start of an " +"external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order, the deretraction is performed slightly on the inside from the " +"start of the external perimeter. That way any potential over extrusion is " +"hidden from the outside surface. \n" +"\n" +"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order as in these modes it is more likely an external perimeter is " +"printed immediately after a deretraction move." +msgstr "" + +msgid "Wipe speed" +msgstr "" + +msgid "" +"The wipe speed is determined by the speed setting specified in this " +"configuration.If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above.The default value for " +"this parameter is 80%" +msgstr "" + +msgid "Skirt distance" +msgstr "" + +msgid "Distance from skirt to brim or object" +msgstr "" + +msgid "Skirt height" +msgstr "" + +msgid "How many layers of skirt. Usually only one layer" +msgstr "" + +msgid "Skirt loops" +msgstr "" + +msgid "Number of loops for the skirt. Zero means disabling skirt" +msgstr "" + +msgid "Skirt speed" +msgstr "" + +msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." +msgstr "" + +msgid "" +"The printing speed in exported gcode will be slowed down, when the estimated " +"layer time is shorter than this value, to get better cooling for these layers" +msgstr "" + +msgid "Minimum sparse infill threshold" +msgstr "" + +msgid "" +"Sparse infill area which is smaller than threshold value is replaced by " +"internal solid infill" +msgstr "" + +msgid "" +"Line width of internal solid infill. If expressed as a %, it will be " +"computed over the nozzle diameter." +msgstr "" + +msgid "Speed of internal solid infill, not the top and bottom surface" +msgstr "" + +msgid "Spiral vase" +msgstr "" + +msgid "" +"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"model into a single walled print with solid bottom layers. The final " +"generated model has no seam" +msgstr "" + +msgid "Smooth Spiral" +msgstr "" + +msgid "" +"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " +"at all, even in the XY directions on walls that are not vertical" +msgstr "" + +msgid "Max XY Smoothing" +msgstr "" + +msgid "" +"Maximum distance to move points in XY to try to achieve a smooth spiralIf " +"expressed as a %, it will be computed over nozzle diameter" +msgstr "" + +msgid "" +"If smooth or traditional mode is selected, a timelapse video will be " +"generated for each print. After each layer is printed, a snapshot is taken " +"with the chamber camera. All of these snapshots are composed into a " +"timelapse video when printing completes. If smooth mode is selected, the " +"toolhead will move to the excess chute after each layer is printed and then " +"take a snapshot. Since the melt filament may leak from the nozzle during the " +"process of taking a snapshot, prime tower is required for smooth mode to " +"wipe nozzle." +msgstr "" + +msgid "Traditional" +msgstr "" + +msgid "Temperature variation" +msgstr "" + +msgid "Start G-code" +msgstr "" + +msgid "Start G-code when start the whole printing" +msgstr "" + +msgid "Start G-code when start the printing of this filament" +msgstr "" + +msgid "Single Extruder Multi Material" +msgstr "" + +msgid "Use single nozzle to print multi filament" +msgstr "" + +msgid "Manual Filament Change" +msgstr "" + +msgid "" +"Enable this option to omit the custom Change filament G-code only at the " +"beginning of the print. The tool change command (e.g., T0) will be skipped " +"throughout the entire print. This is useful for manual multi-material " +"printing, where we use M600/PAUSE to trigger the manual filament change " +"action." +msgstr "" + +msgid "Purge in prime tower" +msgstr "" + +msgid "Purge remaining filament into prime tower" +msgstr "" + +msgid "Enable filament ramming" +msgstr "" + +msgid "No sparse layers (beta)" +msgstr "" + +msgid "" +"If enabled, the wipe tower will not be printed on layers with no " +"toolchanges. On layers with a toolchange, extruder will travel downward to " +"print the wipe tower. User is responsible for ensuring there is no collision " +"with the print." +msgstr "" + +msgid "Prime all printing extruders" +msgstr "" + +msgid "" +"If enabled, all printing extruders will be primed at the front edge of the " +"print bed at the start of the print." +msgstr "" + +msgid "Slice gap closing radius" +msgstr "" + +msgid "" +"Cracks smaller than 2x gap closing radius are being filled during the " +"triangle mesh slicing. The gap closing operation may reduce the final print " +"resolution, therefore it is advisable to keep the value reasonably low." +msgstr "" + +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + +msgid "Z offset" +msgstr "" + +msgid "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." +msgstr "" + +msgid "Enable support" +msgstr "" + +msgid "Enable support generation." +msgstr "" + +msgid "" +"normal(auto) and tree(auto) is used to generate support automatically. If " +"normal(manual) or tree(manual) is selected, only support enforcers are " +"generated" +msgstr "" + +msgid "normal(auto)" +msgstr "" + +msgid "tree(auto)" +msgstr "" + +msgid "normal(manual)" +msgstr "" + +msgid "tree(manual)" +msgstr "" + +msgid "Support/object xy distance" +msgstr "" + +msgid "XY separation between an object and its support" +msgstr "" + +msgid "Pattern angle" +msgstr "" + +msgid "Use this setting to rotate the support pattern on the horizontal plane." +msgstr "" + +msgid "On build plate only" +msgstr "" + +msgid "Don't create support on model surface, only on build plate" +msgstr "" + +msgid "Support critical regions only" +msgstr "" + +msgid "" +"Only create support for critical regions including sharp tail, cantilever, " +"etc." +msgstr "" + +msgid "Remove small overhangs" +msgstr "" + +msgid "Remove small overhangs that possibly need no supports." +msgstr "" + +msgid "Top Z distance" +msgstr "" + +msgid "The z gap between the top support interface and object" +msgstr "" + +msgid "Bottom Z distance" +msgstr "" + +msgid "The z gap between the bottom support interface and object" +msgstr "" + +msgid "Support/raft base" +msgstr "" + +msgid "" +"Filament to print support base and raft. \"Default\" means no specific " +"filament for support and current filament is used" +msgstr "" + +msgid "Avoid interface filament for base" +msgstr "" + +msgid "" +"Avoid using support interface filament to print support base if possible." +msgstr "" + +msgid "" +"Line width of support. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" + +msgid "Interface use loop pattern" +msgstr "" + +msgid "" +"Cover the top contact layer of the supports with loops. Disabled by default." +msgstr "" + +msgid "Support/raft interface" +msgstr "" + +msgid "" +"Filament to print support interface. \"Default\" means no specific filament " +"for support interface and current filament is used" +msgstr "" + +msgid "Top interface layers" +msgstr "" + +msgid "Number of top interface layers" +msgstr "" + +msgid "Bottom interface layers" +msgstr "" + +msgid "Number of bottom interface layers" +msgstr "" + +msgid "Same as top" +msgstr "" + +msgid "Top interface spacing" +msgstr "" + +msgid "Spacing of interface lines. Zero means solid interface" +msgstr "" + +msgid "Bottom interface spacing" +msgstr "" + +msgid "Spacing of bottom interface lines. Zero means solid interface" +msgstr "" + +msgid "Speed of support interface" +msgstr "" + +msgid "Base pattern" +msgstr "" + +msgid "Line pattern of support" +msgstr "" + +msgid "Rectilinear grid" +msgstr "" + +msgid "Hollow" +msgstr "" + +msgid "Interface pattern" +msgstr "" + +msgid "" +"Line pattern of support interface. Default pattern for non-soluble support " +"interface is Rectilinear, while default pattern for soluble support " +"interface is Concentric" +msgstr "" + +msgid "Rectilinear Interlaced" +msgstr "" + +msgid "Base pattern spacing" +msgstr "" + +msgid "Spacing between support lines" +msgstr "" + +msgid "Normal Support expansion" +msgstr "" + +msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgstr "" + +msgid "Speed of support" +msgstr "" + +msgid "" +"Style and shape of the support. For normal support, projecting the supports " +"into a regular grid will create more stable supports (default), while snug " +"support towers will save material and reduce object scarring.\n" +"For tree support, slim and organic style will merge branches more " +"aggressively and save a lot of material (default organic), while hybrid " +"style will create similar structure to normal support under large flat " +"overhangs." +msgstr "" + +msgid "Snug" +msgstr "" + +msgid "Tree Slim" +msgstr "" + +msgid "Tree Strong" +msgstr "" + +msgid "Tree Hybrid" +msgstr "" + +msgid "Organic" +msgstr "" + +msgid "Independent support layer height" +msgstr "" + +msgid "" +"Support layer uses layer height independent with object layer. This is to " +"support customizing z-gap and save print time.This option will be invalid " +"when the prime tower is enabled." +msgstr "" + +msgid "Threshold angle" +msgstr "" + +msgid "" +"Support will be generated for overhangs whose slope angle is below the " +"threshold." +msgstr "" + +msgid "Tree support branch angle" +msgstr "" + +msgid "" +"This setting determines the maximum overhang angle that t he branches of " +"tree support allowed to make.If the angle is increased, the branches can be " +"printed more horizontally, allowing them to reach farther." +msgstr "" + +msgid "Preferred Branch Angle" +msgstr "" + +#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" +msgid "" +"The preferred angle of the branches, when they do not have to avoid the " +"model. Use a lower angle to make them more vertical and more stable. Use a " +"higher angle for branches to merge faster." +msgstr "" + +msgid "Tree support branch distance" +msgstr "" + +msgid "" +"This setting determines the distance between neighboring tree support nodes." +msgstr "" + +msgid "Branch Density" +msgstr "" + +#. TRN PrintSettings: "Organic supports" > "Branch Density" +msgid "" +"Adjusts the density of the support structure used to generate the tips of " +"the branches. A higher value results in better overhangs but the supports " +"are harder to remove, thus it is recommended to enable top support " +"interfaces instead of a high branch density value if dense interfaces are " +"needed." +msgstr "" + +msgid "Adaptive layer height" +msgstr "" + +msgid "" +"Enabling this option means the height of tree support layer except the " +"first will be automatically calculated " +msgstr "" + +msgid "Auto brim width" +msgstr "" + +msgid "" +"Enabling this option means the width of the brim for tree support will be " +"automatically calculated" +msgstr "" + +msgid "Tree support brim width" +msgstr "" + +msgid "Distance from tree branch to the outermost brim line" +msgstr "" + +msgid "Tip Diameter" +msgstr "" + +#. TRN PrintSettings: "Organic supports" > "Tip Diameter" +msgid "Branch tip diameter for organic supports." +msgstr "" + +msgid "Tree support branch diameter" +msgstr "" + +msgid "This setting determines the initial diameter of support nodes." +msgstr "" + +#. TRN PrintSettings: #lmFIXME +msgid "Branch Diameter Angle" +msgstr "" + +#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" +msgid "" +"The angle of the branches' diameter as they gradually become thicker towards " +"the bottom. An angle of 0 will cause the branches to have uniform thickness " +"over their length. A bit of an angle can increase stability of the organic " +"support." +msgstr "" + +msgid "Branch Diameter with double walls" +msgstr "" + +#. TRN PrintSettings: "Organic supports" > "Branch Diameter" +msgid "" +"Branches with area larger than the area of a circle of this diameter will be " +"printed with double walls for stability. Set this value to zero for no " +"double walls." +msgstr "" + +msgid "Support wall loops" +msgstr "" + +msgid "This setting specify the count of walls around support" +msgstr "" + +msgid "Tree support with infill" +msgstr "" + +msgid "" +"This setting specifies whether to add infill inside large hollows of tree " +"support" +msgstr "" + +msgid "Activate temperature control" +msgstr "" + +msgid "" +"Enable this option for chamber temperature control. An M191 command will be " +"added before \"machine_start_gcode\"\n" +"G-code commands: M141/M191 S(0-255)" +msgstr "" + +msgid "Chamber temperature" +msgstr "" + +msgid "" +"Higher chamber temperature can help suppress or reduce warping and " +"potentially lead to higher interlayer bonding strength for high temperature " +"materials like ABS, ASA, PC, PA and so on.At the same time, the air " +"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " +"other low temperature materials,the actual chamber temperature should not be " +"high to avoid cloggings, so 0 which stands for turning off is highly " +"recommended" +msgstr "" + +msgid "Nozzle temperature for layers after the initial one" +msgstr "" + +msgid "Detect thin wall" +msgstr "" + +msgid "" +"Detect thin wall which can't contain two line width. And use single line to " +"print. Maybe printed not very well, because it's not closed loop" +msgstr "" + +msgid "" +"This gcode is inserted when change filament, including T command to trigger " +"tool change" +msgstr "" + +msgid "This gcode is inserted when the extrusion role is changed" +msgstr "" + +msgid "" +"Line width for top surfaces. If expressed as a %, it will be computed over " +"the nozzle diameter." +msgstr "" + +msgid "Speed of top surface infill which is solid" +msgstr "" + +msgid "Top shell layers" +msgstr "" + +msgid "" +"This is the number of solid layers of top shell, including the top surface " +"layer. When the thickness calculated by this value is thinner than top shell " +"thickness, the top shell layers will be increased" +msgstr "" + +msgid "Top solid layers" +msgstr "" + +msgid "Top shell thickness" +msgstr "" + +msgid "" +"The number of top solid layers is increased when slicing if the thickness " +"calculated by top shell layers is thinner than this value. This can avoid " +"having too thin shell when layer height is small. 0 means that this setting " +"is disabled and thickness of top shell is absolutely determained by top " +"shell layers" +msgstr "" + +msgid "Speed of travel which is faster and without extrusion" +msgstr "" + +msgid "Wipe while retracting" +msgstr "" + +msgid "" +"Move nozzle along the last extrusion path when retracting to clean leaked " +"material on nozzle. This can minimize blob when print new part after travel" +msgstr "" + +msgid "Wipe Distance" +msgstr "" + +msgid "" +"Discribe how long the nozzle will move along the last path when " +"retracting. \n" +"\n" +"Depending on how long the wipe operation lasts, how fast and long the " +"extruder/filament retraction settings are, a retraction move may be needed " +"to retract the remaining filament. \n" +"\n" +"Setting a value in the retract amount before wipe setting below will perform " +"any excess retraction before the wipe, else it will be performed after." +msgstr "" + +msgid "" +"The wiping tower can be used to clean up the residue on the nozzle and " +"stabilize the chamber pressure inside the nozzle, in order to avoid " +"appearance defects when printing objects." +msgstr "" + +msgid "Purging volumes" +msgstr "" + +msgid "Flush multiplier" +msgstr "" + +msgid "" +"The actual flushing volumes is equal to the flush multiplier multiplied by " +"the flushing volumes in the table." +msgstr "" + +msgid "Prime volume" +msgstr "" + +msgid "The volume of material to prime extruder on tower." +msgstr "" + +msgid "Width of prime tower" +msgstr "" + +msgid "Wipe tower rotation angle" +msgstr "" + +msgid "Wipe tower rotation angle with respect to x-axis." +msgstr "" + +msgid "Stabilization cone apex angle" +msgstr "" + +msgid "" +"Angle at the apex of the cone that is used to stabilize the wipe tower. " +"Larger angle means wider base." +msgstr "" + +msgid "Wipe tower purge lines spacing" +msgstr "" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "" + +msgid "Wipe tower extruder" +msgstr "" + +msgid "" +"The extruder to use when printing perimeter of the wipe tower. Set to 0 to " +"use the one that is available (non-soluble would be preferred)." +msgstr "" + +msgid "Purging volumes - load/unload volumes" +msgstr "" + +msgid "" +"This vector saves required volumes to change from/to each tool used on the " +"wipe tower. These values are used to simplify creation of the full purging " +"volumes below." +msgstr "" + +msgid "" +"Purging after filament change will be done inside objects' infills. This may " +"lower the amount of waste and decrease the print time. If the walls are " +"printed with transparent filament, the mixed color infill will be seen " +"outside. It will not take effect, unless the prime tower is enabled." +msgstr "" + +msgid "" +"Purging after filament change will be done inside objects' support. This may " +"lower the amount of waste and decrease the print time. It will not take " +"effect, unless the prime tower is enabled." +msgstr "" + +msgid "" +"This object will be used to purge the nozzle after a filament change to save " +"filament and decrease the print time. Colours of the objects will be mixed " +"as a result. It will not take effect, unless the prime tower is enabled." +msgstr "" + +msgid "Maximal bridging distance" +msgstr "" + +msgid "Maximal distance between supports on sparse infill sections." +msgstr "" + +msgid "X-Y hole compensation" +msgstr "" + +msgid "" +"Holes of object will be grown or shrunk in XY plane by the configured value. " +"Positive value makes holes bigger. Negative value makes holes smaller. This " +"function is used to adjust size slightly when the object has assembling issue" +msgstr "" + +msgid "X-Y contour compensation" +msgstr "" + +msgid "" +"Contour of object will be grown or shrunk in XY plane by the configured " +"value. Positive value makes contour bigger. Negative value makes contour " +"smaller. This function is used to adjust size slightly when the object has " +"assembling issue" +msgstr "" + +msgid "Convert holes to polyholes" +msgstr "" + +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" + +msgid "Polyhole detection margin" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" + +msgid "Polyhole twist" +msgstr "" + +msgid "Rotate the polyhole every layer." +msgstr "" + +msgid "G-code thumbnails" +msgstr "" + +msgid "" +"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " +"following format: \"XxY, XxY, ...\"" +msgstr "" + +msgid "Format of G-code thumbnails" +msgstr "" + +msgid "" +"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " +"QOI for low memory firmware" +msgstr "" + +msgid "Use relative E distances" +msgstr "" + +msgid "" +"Relative extrusion is recommended when using \"label_objects\" option.Some " +"extruders work better with this option unckecked (absolute extrusion mode). " +"Wipe tower is only compatible with relative mode. It is recommended on most " +"printers. Default is checked" +msgstr "" + +msgid "" +"Classic wall generator produces walls with constant extrusion width and for " +"very thin areas is used gap-fill. Arachne engine produces walls with " +"variable extrusion width" +msgstr "" + +msgid "Classic" +msgstr "" + +msgid "Arachne" +msgstr "" + +msgid "Wall transition length" +msgstr "" + +msgid "" +"When transitioning between different numbers of walls as the part becomes " +"thinner, a certain amount of space is allotted to split or join the wall " +"segments. It's expressed as a percentage over nozzle diameter" +msgstr "" + +msgid "Wall transitioning filter margin" +msgstr "" + +msgid "" +"Prevent transitioning back and forth between one extra wall and one less. " +"This margin extends the range of extrusion widths which follow to [Minimum " +"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " +"margin reduces the number of transitions, which reduces the number of " +"extrusion starts/stops and travel time. However, large extrusion width " +"variation can lead to under- or overextrusion problems. It's expressed as a " +"percentage over nozzle diameter" +msgstr "" + +msgid "Wall transitioning threshold angle" +msgstr "" + +msgid "" +"When to create transitions between even and odd numbers of walls. A wedge " +"shape with an angle greater than this setting will not have transitions and " +"no walls will be printed in the center to fill the remaining space. Reducing " +"this setting reduces the number and length of these center walls, but may " +"leave gaps or overextrude" +msgstr "" + +msgid "Wall distribution count" +msgstr "" + +msgid "" +"The number of walls, counted from the center, over which the variation needs " +"to be spread. Lower values mean that the outer walls don't change in width" +msgstr "" + +msgid "Minimum feature size" +msgstr "" + +msgid "" +"Minimum thickness of thin features. Model features that are thinner than " +"this value will not be printed, while features thicker than the Minimum " +"feature size will be widened to the Minimum wall width. It's expressed as a " +"percentage over nozzle diameter" +msgstr "" + +msgid "Minimum wall length" +msgstr "" + +msgid "" +"Adjust this value to prevent short, unclosed walls from being printed, which " +"could increase print time. Higher values remove more and longer walls.\n" +"\n" +"NOTE: Bottom and top surfaces will not be affected by this value to prevent " +"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"Advanced settings below to adjust the sensitivity of what is considered a " +"top-surface. 'One wall threshold' is only visibile if this setting is set " +"above the default value of 0.5, or if single-wall top surfaces is enabled." +msgstr "" + +msgid "First layer minimum wall width" +msgstr "" + +msgid "" +"The minimum wall width that should be used for the first layer is " +"recommended to be set to the same size as the nozzle. This adjustment is " +"expected to enhance adhesion." +msgstr "" + +msgid "Minimum wall width" +msgstr "" + +msgid "" +"Width of the wall that will replace thin features (according to the Minimum " +"feature size) of the model. If the Minimum wall width is thinner than the " +"thickness of the feature, the wall will become as thick as the feature " +"itself. It's expressed as a percentage over nozzle diameter" +msgstr "" + +msgid "Detect narrow internal solid infill" +msgstr "" + +msgid "" +"This option will auto detect narrow internal solid infill area. If enabled, " +"concentric pattern will be used for the area to speed printing up. " +"Otherwise, rectilinear pattern is used defaultly." +msgstr "" + +msgid "invalid value " +msgstr "" + +msgid "Invalid value when spiral vase mode is enabled: " +msgstr "" + +msgid "too large line width " +msgstr "" + +msgid " not in range " +msgstr "" + +msgid "Minimum save" +msgstr "" + +msgid "export 3mf with minimum size." +msgstr "" + +msgid "No check" +msgstr "" + +msgid "Do not run any validity checks, such as gcode path conflicts check." +msgstr "" + +msgid "Ensure on bed" +msgstr "" + +msgid "" +"Lift the object above the bed when it is partially below. Disabled by default" +msgstr "" + +msgid "Orient Options" +msgstr "" + +msgid "Orient options: 0-disable, 1-enable, others-auto" +msgstr "" + +msgid "Rotation angle around the Z axis in degrees." +msgstr "" + +msgid "Rotate around Y" +msgstr "" + +msgid "Rotation angle around the Y axis in degrees." +msgstr "" + +msgid "Data directory" +msgstr "" + +msgid "" +"Load and store settings at the given directory. This is useful for " +"maintaining different profiles or including configurations from a network " +"storage." +msgstr "" + +msgid "Load custom gcode" +msgstr "" + +msgid "Load custom gcode from json" +msgstr "" + +msgid "Current z-hop" +msgstr "" + +msgid "Contains z-hop present at the beginning of the custom G-code block." +msgstr "" + +msgid "" +"Position of the extruder at the beginning of the custom G-code block. If the " +"custom G-code travels somewhere else, it should write to this variable so " +"PrusaSlicer knows where it travels from when it gets control back." +msgstr "" + +msgid "" +"Retraction state at the beginning of the custom G-code block. If the custom " +"G-code moves the extruder axis, it should write to this variable so " +"PrusaSlicer deretracts correctly when it gets control back." +msgstr "" + +msgid "Extra deretraction" +msgstr "" + +msgid "Currently planned extra extruder priming after deretraction." +msgstr "" + +msgid "Current extruder" +msgstr "" + +msgid "Zero-based index of currently used extruder." +msgstr "" + +msgid "Current object index" +msgstr "" + +msgid "" +"Specific for sequential printing. Zero-based index of currently printed " +"object." +msgstr "" + +msgid "Has wipe tower" +msgstr "" + +msgid "Whether or not wipe tower is being generated in the print." +msgstr "" + +msgid "Initial extruder" +msgstr "" + +msgid "" +"Zero-based index of the first extruder used in the print. Same as " +"initial_tool." +msgstr "" + +msgid "Initial tool" +msgstr "" + +msgid "" +"Zero-based index of the first extruder used in the print. Same as " +"initial_extruder." +msgstr "" + +msgid "Is extruder used?" +msgstr "" + +msgid "Vector of bools stating whether a given extruder is used in the print." +msgstr "" + +msgid "Volume per extruder" +msgstr "" + +msgid "Total filament volume extruded per extruder during the entire print." +msgstr "" + +msgid "Total toolchanges" +msgstr "" + +msgid "Number of toolchanges during the print." +msgstr "" + +msgid "Total volume" +msgstr "" + +msgid "Total volume of filament used during the entire print." +msgstr "" + +msgid "Weight per extruder" +msgstr "" + +msgid "" +"Weight per extruder extruded during the entire print. Calculated from " +"filament_density value in Filament Settings." +msgstr "" + +msgid "Total weight" +msgstr "" + +msgid "" +"Total weight of the print. Calculated from filament_density value in " +"Filament Settings." +msgstr "" + +msgid "Total layer count" +msgstr "" + +msgid "Number of layers in the entire print." +msgstr "" + +msgid "Number of objects" +msgstr "" + +msgid "Total number of objects in the print." +msgstr "" + +msgid "Number of instances" +msgstr "" + +msgid "Total number of object instances in the print, summed over all objects." +msgstr "" + +msgid "Scale per object" +msgstr "" + +msgid "" +"Contains a string with the information about what scaling was applied to the " +"individual objects. Indexing of the objects is zero-based (first object has " +"index 0).\n" +"Example: 'x:100% y:50% z:100'." +msgstr "" + +msgid "Input filename without extension" +msgstr "" + +msgid "Source filename of the first object, without extension." +msgstr "" + +msgid "" +"The vector has two elements: x and y coordinate of the point. Values in mm." +msgstr "" + +msgid "" +"The vector has two elements: x and y dimension of the bounding box. Values " +"in mm." +msgstr "" + +msgid "First layer convex hull" +msgstr "" + +msgid "" +"Vector of points of the first layer convex hull. Each element has the " +"following format:'[x, y]' (x and y are floating-point numbers in mm)." +msgstr "" + +msgid "Bottom-left corner of first layer bounding box" +msgstr "" + +msgid "Top-right corner of first layer bounding box" +msgstr "" + +msgid "Size of the first layer bounding box" +msgstr "" + +msgid "Bottom-left corner of print bed bounding box" +msgstr "" + +msgid "Top-right corner of print bed bounding box" +msgstr "" + +msgid "Size of the print bed bounding box" +msgstr "" + +msgid "Timestamp" +msgstr "" + +msgid "String containing current time in yyyyMMdd-hhmmss format." +msgstr "" + +msgid "Day" +msgstr "" + +msgid "Hour" +msgstr "" + +msgid "Minute" +msgstr "" + +msgid "Print preset name" +msgstr "" + +msgid "Name of the print preset used for slicing." +msgstr "" + +msgid "Filament preset name" +msgstr "" + +msgid "" +"Names of the filament presets used for slicing. The variable is a vector " +"containing one name for each extruder." +msgstr "" + +msgid "Printer preset name" +msgstr "" + +msgid "Name of the printer preset used for slicing." +msgstr "" + +msgid "Physical printer name" +msgstr "" + +msgid "Name of the physical printer used for slicing." +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Index of the current layer. One-based (i.e. first layer is number 1)." +msgstr "" + +msgid "Layer z" +msgstr "" + +msgid "" +"Height of the current layer above the print bed, measured to the top of the " +"layer." +msgstr "" + +msgid "Maximal layer z" +msgstr "" + +msgid "Height of the last layer above the print bed." +msgstr "" + +msgid "Filament extruder ID" +msgstr "" + +msgid "The current extruder ID. The same as current_extruder." +msgstr "" + +msgid "Error in zip archive" +msgstr "" + +msgid "Generating walls" +msgstr "" + +msgid "Generating infill regions" +msgstr "" + +msgid "Generating infill toolpath" +msgstr "" + +msgid "Detect overhangs for auto-lift" +msgstr "" + +msgid "Generating support" +msgstr "" + +msgid "Checking support necessity" +msgstr "" + +msgid "floating regions" +msgstr "" + +msgid "floating cantilever" +msgstr "" + +msgid "large overhangs" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"It seems object %s has %s. Please re-orient the object or enable support " +"generation." +msgstr "" + +msgid "Optimizing toolpath" +msgstr "" + +msgid "Slicing mesh" +msgstr "" + +msgid "" +"No layers were detected. You might want to repair your STL file(s) or check " +"their size or thickness and retry.\n" +msgstr "" + +msgid "" +"An object's XY size compensation will not be used because it is also color-" +"painted.\n" +"XY Size compensation can not be combined with color-painting." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Support: generate toolpath at layer %d" +msgstr "" + +msgid "Support: detect overhangs" +msgstr "" + +msgid "Support: generate contact points" +msgstr "" + +msgid "Support: propagate branches" +msgstr "" + +msgid "Support: draw polygons" +msgstr "" + +msgid "Support: generate toolpath" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Support: generate polygons at layer %d" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Support: fix holes at layer %d" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Support: propagate branches at layer %d" +msgstr "" + +msgid "" +"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." +msgstr "" + +msgid "Loading of a model file failed." +msgstr "" + +msgid "The supplied file couldn't be read because it's empty" +msgstr "" + +msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." +msgstr "" + +msgid "Canceled" +msgstr "" + +msgid "load_obj: failed to parse" +msgstr "" + +msgid "The file contains polygons with more than 4 vertices." +msgstr "" + +msgid "The file contains polygons with less than 2 vertices." +msgstr "" + +msgid "The file contains invalid vertex index." +msgstr "" + +msgid "This OBJ file couldn't be read because it's empty." +msgstr "" + +msgid "Flow Rate Calibration" +msgstr "" + +msgid "Max Volumetric Speed Calibration" +msgstr "" + +msgid "Manage Result" +msgstr "" + +msgid "Manual Calibration" +msgstr "" + +msgid "Result can be read by human eyes." +msgstr "" + +msgid "Auto-Calibration" +msgstr "" + +msgid "We would use Lidar to read the calibration result" +msgstr "" + +msgid "Prev" +msgstr "" + +msgid "Recalibration" +msgstr "" + +msgid "Calibrate" +msgstr "" + +msgid "Finish" +msgstr "" + +msgid "How to use calibration result?" +msgstr "" + +msgid "" +"You could change the Flow Dynamics Calibration Factor in material editing" +msgstr "" + +msgid "" +"The current firmware version of the printer does not support calibration.\n" +"Please upgrade the printer firmware." +msgstr "" + +msgid "Calibration not supported" +msgstr "" + +msgid "Error desc" +msgstr "" + +msgid "Extra info" +msgstr "" + +msgid "Flow Dynamics" +msgstr "" + +msgid "Flow Rate" +msgstr "" + +msgid "Max Volumetric Speed" +msgstr "" + +msgid "Please enter the name you want to save to printer." +msgstr "" + +msgid "The name cannot exceed 40 characters." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Please input valid values:\n" +"Start value: >= %.1f\n" +"End value: <= %.1f\n" +"End value: > Start value\n" +"Value step: >= %.3f)" +msgstr "" + +msgid "The name cannot be empty." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +msgid "The name cannot be the same as the system preset name." +msgstr "" + +msgid "The name is the same as another existing preset name" +msgstr "" + +msgid "create new preset failed." +msgstr "" + +msgid "" +"Are you sure to cancel the current calibration and return to the home page?" +msgstr "" + +msgid "No Printer Connected!" +msgstr "" + +msgid "Printer is not connected yet." +msgstr "" + +msgid "Please select filament to calibrate." +msgstr "" + +msgid "The input value size must be 3." +msgstr "" + +msgid "Connecting to printer..." +msgstr "" + +msgid "The failed test result has been dropped." +msgstr "" + +msgid "Flow Dynamics Calibration result has been saved to the printer" +msgstr "" + +msgid "Internal Error" +msgstr "" + +msgid "Please select at least one filament for calibration" +msgstr "" + +msgid "Flow rate calibration result has been saved to preset" +msgstr "" + +msgid "Max volumetric speed calibration result has been saved to preset" +msgstr "" + +msgid "When do you need Flow Dynamics Calibration" +msgstr "" + +msgid "" +"We now have added the auto-calibration for different filaments, which is " +"fully automated and the result will be saved into the printer for future " +"use. You only need to do the calibration in the following limited cases:\n" +"1. If you introduce a new filament of different brands/models or the " +"filament is damp;\n" +"2. if the nozzle is worn out or replaced with a new one;\n" +"3. If the max volumetric speed or print temperature is changed in the " +"filament setting." +msgstr "" + +msgid "About this calibration" +msgstr "" + +msgid "" +"Please find the details of Flow Dynamics Calibration from our wiki.\n" +"\n" +"Usually the calibration is unnecessary. When you start a single color/" +"material print, with the \"flow dynamics calibration\" option checked in the " +"print start menu, the printer will follow the old way, calibrate the " +"filament before the print; When you start a multi color/material print, the " +"printer will use the default compensation parameter for the filament during " +"every filament switch which will have a good result in most cases.\n" +"\n" +"Please note there are a few cases that will make the calibration result not " +"reliable: using a texture plate to do the calibration; the build plate does " +"not have good adhesion (please wash the build plate or apply gluestick!) ..." +"You can find more from our wiki.\n" +"\n" +"The calibration results have about 10 percent jitter in our test, which may " +"cause the result not exactly the same in each calibration. We are still " +"investigating the root cause to do improvements with new updates." +msgstr "" + +msgid "When to use Flow Rate Calibration" +msgstr "" + +msgid "" +"After using Flow Dynamics Calibration, there might still be some extrusion " +"issues, such as:\n" +"1. Over-Extrusion: Excess material on your printed object, forming blobs or " +"zits, or the layers seem thicker than expected and not uniform.\n" +"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " +"top layer of the model, even when printing slowly.\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " +"they should be." +msgstr "" + +msgid "" +"In addition, Flow Rate Calibration is crucial for foaming materials like LW-" +"PLA used in RC planes. These materials expand greatly when heated, and " +"calibration provides a useful reference flow rate." +msgstr "" + +msgid "" +"Flow Rate Calibration measures the ratio of expected to actual extrusion " +"volumes. The default setting works well in Bambu Lab printers and official " +"filaments as they were pre-calibrated and fine-tuned. For a regular " +"filament, you usually won't need to perform a Flow Rate Calibration unless " +"you still see the listed defects after you have done other calibrations. For " +"more details, please check out the wiki article." +msgstr "" + +msgid "" +"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " +"directly measuring the calibration patterns. However, please be advised that " +"the efficacy and accuracy of this method may be compromised with specific " +"types of materials. Particularly, filaments that are transparent or semi-" +"transparent, sparkling-particled, or have a high-reflective finish may not " +"be suitable for this calibration and can produce less-than-desirable " +"results.\n" +"\n" +"The calibration results may vary between each calibration or filament. We " +"are still improving the accuracy and compatibility of this calibration " +"through firmware updates over time.\n" +"\n" +"Caution: Flow Rate Calibration is an advanced process, to be attempted only " +"by those who fully understand its purpose and implications. Incorrect usage " +"can lead to sub-par prints or printer damage. Please make sure to carefully " +"read and understand the process before doing it." +msgstr "" + +msgid "When you need Max Volumetric Speed Calibration" +msgstr "" + +msgid "Over-extrusion or under extrusion" +msgstr "" + +msgid "Max Volumetric Speed calibration is recommended when you print with:" +msgstr "" + +msgid "material with significant thermal shrinkage/expansion, such as..." +msgstr "" + +msgid "materials with inaccurate filament diameter" +msgstr "" + +msgid "We found the best Flow Dynamics Calibration Factor" +msgstr "" + +msgid "" +"Part of the calibration failed! You may clean the plate and retry. The " +"failed test result would be dropped." +msgstr "" + +msgid "" +"*We recommend you to add brand, materia, type, and even humidity level in " +"the Name" +msgstr "" + +msgid "Failed" +msgstr "" + +msgid "" +"Only one of the results with the same name will be saved. Are you sure you " +"want to overrides the other results?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"There is already a historical calibration result with the same name: %s. " +"Only one of the results with the same name is saved. Are you sure you want " +"to overrides the historical result?" +msgstr "" + +msgid "Please find the best line on your plate" +msgstr "" + +msgid "Please find the cornor with perfect degree of extrusion" +msgstr "" + +msgid "Input Value" +msgstr "" + +msgid "Save to Filament Preset" +msgstr "" + +msgid "Preset" +msgstr "" + +msgid "Record Factor" +msgstr "" + +msgid "We found the best flow ratio for you" +msgstr "" + +msgid "Flow Ratio" +msgstr "" + +msgid "Please input a valid value (0.0 < flow ratio < 2.0)" +msgstr "" + +msgid "Please enter the name of the preset you want to save." +msgstr "" + +msgid "Calibration1" +msgstr "" + +msgid "Calibration2" +msgstr "" + +msgid "Please find the best object on your plate" +msgstr "" + +msgid "Fill in the value above the block with smoothest top surface" +msgstr "" + +msgid "Skip Calibration2" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "flow ratio : %s " +msgstr "" + +msgid "Please choose a block with smoothest top surface" +msgstr "" + +msgid "Please choose a block with smoothest top surface." +msgstr "" + +msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" +msgstr "" + +msgid "Calibration Type" +msgstr "" + +msgid "Complete Calibration" +msgstr "" + +msgid "Fine Calibration based on flow ratio" +msgstr "" + +msgid "Title" +msgstr "" + +msgid "" +"A test model will be printed. Please clear the build plate and place it back " +"to the hot bed before calibration." +msgstr "" + +msgid "Printing Parameters" +msgstr "" + +msgid "- ℃" +msgstr "" + +msgid " ℃" +msgstr "" + +msgid "Plate Type" +msgstr "" + +msgid "filament position" +msgstr "" + +msgid "External Spool" +msgstr "" + +msgid "Filament For Calibration" +msgstr "" + +msgid "" +"Tips for calibration material: \n" +"- Materials that can share same hot bed temperature\n" +"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +msgstr "" + +msgid "Pattern" +msgstr "" + +msgid "Method" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s is not compatible with %s" +msgstr "" + +msgid "TPU is not supported for Flow Dynamics Auto-Calibration." +msgstr "" + +msgid "Connecting to printer" +msgstr "" + +msgid "From k Value" +msgstr "" + +msgid "To k Value" +msgstr "" + +msgid "Step value" +msgstr "" + +msgid "0.5" +msgstr "" + +msgid "0.005" +msgstr "" + +msgid "The nozzle diameter has been synchronized from the printer Settings" +msgstr "" + +msgid "From Volumetric Speed" +msgstr "" + +msgid "To Volumetric Speed" +msgstr "" + +msgid "Flow Dynamics Calibration Result" +msgstr "" + +msgid "No History Result" +msgstr "" + +msgid "Success to get history result" +msgstr "" + +msgid "Refreshing the historical Flow Dynamics Calibration records" +msgstr "" + +msgid "Action" +msgstr "" + +msgid "Edit Flow Dynamics Calibration" +msgstr "" + +msgid "Network lookup" +msgstr "" + +msgid "Address" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "Service name" +msgstr "" + +msgid "OctoPrint version" +msgstr "" + +msgid "Searching for devices" +msgstr "" + +msgid "Finished" +msgstr "" + +msgid "Multiple resolved IP addresses" +msgstr "" + +#, possible-boost-format +msgid "" +"There are several IP addresses resolving to hostname %1%.\n" +"Please select one that should be used." +msgstr "" + +msgid "PA Calibration" +msgstr "" + +msgid "DDE" +msgstr "" + +msgid "Bowden" +msgstr "" + +msgid "Extruder type" +msgstr "" + +msgid "PA Tower" +msgstr "" + +msgid "PA Line" +msgstr "" + +msgid "PA Pattern" +msgstr "" + +msgid "Start PA: " +msgstr "" + +msgid "End PA: " +msgstr "" + +msgid "PA step: " +msgstr "" + +msgid "Print numbers" +msgstr "" + +msgid "" +"Please input valid values:\n" +"Start PA: >= 0.0\n" +"End PA: > Start PA\n" +"PA step: >= 0.001)" +msgstr "" + +msgid "Temperature calibration" +msgstr "" + +msgid "PLA" +msgstr "" + +msgid "ABS/ASA" +msgstr "" + +msgid "PETG" +msgstr "" + +msgid "TPU" +msgstr "" + +msgid "PA-CF" +msgstr "" + +msgid "PET-CF" +msgstr "" + +msgid "Filament type" +msgstr "" + +msgid "Start temp: " +msgstr "" + +msgid "End temp: " +msgstr "" + +msgid "Temp step: " +msgstr "" + +msgid "" +"Please input valid values:\n" +"Start temp: <= 350\n" +"End temp: >= 170\n" +"Start temp > End temp + 5)" +msgstr "" + +msgid "Max volumetric speed test" +msgstr "" + +msgid "Start volumetric speed: " +msgstr "" + +msgid "End volumetric speed: " +msgstr "" + +msgid "step: " +msgstr "" + +msgid "" +"Please input valid values:\n" +"start > 0 \n" +"step >= 0\n" +"end > start + step)" +msgstr "" + +msgid "VFA test" +msgstr "" + +msgid "Start speed: " +msgstr "" + +msgid "End speed: " +msgstr "" + +msgid "" +"Please input valid values:\n" +"start > 10 \n" +"step >= 0\n" +"end > start + step)" +msgstr "" + +msgid "Start retraction length: " +msgstr "" + +msgid "End retraction length: " +msgstr "" + +msgid "mm/mm" +msgstr "" + +msgid "Send G-Code to printer host" +msgstr "" + +msgid "Upload to Printer Host with the following filename:" +msgstr "" + +msgid "Use forward slashes ( / ) as a directory separator if needed." +msgstr "" + +msgid "Upload to storage" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" +msgstr "" + +msgid "Upload" +msgstr "" + +msgid "Print host upload queue" +msgstr "" + +msgid "ID" +msgstr "" + +msgid "Progress" +msgstr "" + +msgid "Host" +msgstr "" + +msgctxt "OfFile" +msgid "Size" +msgstr "" + +msgid "Filename" +msgstr "" + +msgid "Cancel selected" +msgstr "" + +msgid "Show error message" +msgstr "" + +msgid "Enqueued" +msgstr "" + +msgid "Uploading" +msgstr "" + +msgid "Cancelling" +msgstr "" + +msgid "Error uploading to print host" +msgstr "" + +msgid "Unable to perform boolean operation on selected parts" +msgstr "" + +msgid "Mesh Boolean" +msgstr "" + +msgid "Union" +msgstr "" + +msgid "Difference" +msgstr "" + +msgid "Intersection" +msgstr "" + +msgid "Source Volume" +msgstr "" + +msgid "Tool Volume" +msgstr "" + +msgid "Subtract from" +msgstr "" + +msgid "Subtract with" +msgstr "" + +msgid "selected" +msgstr "" + +msgid "Part 1" +msgstr "" + +msgid "Part 2" +msgstr "" + +msgid "Delete input" +msgstr "" + +msgid "Network Test" +msgstr "" + +msgid "Start Test Multi-Thread" +msgstr "" + +msgid "Start Test Single-Thread" +msgstr "" + +msgid "Export Log" +msgstr "" + +msgid "Studio Version:" +msgstr "" + +msgid "System Version:" +msgstr "" + +msgid "DNS Server:" +msgstr "" + +msgid "Test BambuLab" +msgstr "" + +msgid "Test BambuLab:" +msgstr "" + +msgid "Test Bing.com" +msgstr "" + +msgid "Test bing.com:" +msgstr "" + +msgid "Test HTTP" +msgstr "" + +msgid "Test HTTP Service:" +msgstr "" + +msgid "Test storage" +msgstr "" + +msgid "Test Storage Upload:" +msgstr "" + +msgid "Test storage upgrade" +msgstr "" + +msgid "Test Storage Upgrade:" +msgstr "" + +msgid "Test storage download" +msgstr "" + +msgid "Test Storage Download:" +msgstr "" + +msgid "Test plugin download" +msgstr "" + +msgid "Test Plugin Download:" +msgstr "" + +msgid "Test Storage Upload" +msgstr "" + +msgid "Log Info" +msgstr "" + +msgid "Select filament preset" +msgstr "" + +msgid "Create Filament" +msgstr "" + +msgid "Create Based on Current Filament" +msgstr "" + +msgid "Copy Current Filament Preset " +msgstr "" + +msgid "Basic Information" +msgstr "" + +msgid "Add Filament Preset under this filament" +msgstr "" + +msgid "We could create the filament presets for your following printer:" +msgstr "" + +msgid "Select Vendor" +msgstr "" + +msgid "Input Custom Vendor" +msgstr "" + +msgid "Can't find vendor I want" +msgstr "" + +msgid "Select Type" +msgstr "" + +msgid "Select Filament Preset" +msgstr "" + +msgid "Serial" +msgstr "" + +msgid "e.g. Basic, Matte, Silk, Marble" +msgstr "" + +msgid "Filament Preset" +msgstr "" + +msgid "Create" +msgstr "" + +msgid "Vendor is not selected, please reselect vendor." +msgstr "" + +msgid "Custom vendor is not input, please input custom vendor." +msgstr "" + +msgid "" +"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +msgstr "" + +msgid "Filament type is not selected, please reselect type." +msgstr "" + +msgid "Filament serial is not inputed, please input serial." +msgstr "" + +msgid "" +"There may be escape characters in the vendor or serial input of filament. " +"Please delete and re-enter." +msgstr "" + +msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." +msgstr "" + +msgid "The vendor can not be a number. Please re-enter." +msgstr "" + +msgid "" +"You have not selected a printer or preset yet. Please select at least one." +msgstr "" + +msgid "Some existing presets have failed to be created, as follows:\n" +msgstr "" + +msgid "" +"\n" +"Do you want to rewrite it?" +msgstr "" + +msgid "" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" +"To add preset for more printers, Please go to printer selection" +msgstr "" + +msgid "Create Printer/Nozzle" +msgstr "" + +msgid "Create Printer" +msgstr "" + +msgid "Create Nozzle for Existing Printer" +msgstr "" + +msgid "Create from Template" +msgstr "" + +msgid "Create Based on Current Printer" +msgstr "" + +msgid "Import Preset" +msgstr "" + +msgid "Create Type" +msgstr "" + +msgid "The model is not fond, place reselect vendor." +msgstr "" + +msgid "Select Model" +msgstr "" + +msgid "Select Printer" +msgstr "" + +msgid "Input Custom Model" +msgstr "" + +msgid "Can't find my printer model" +msgstr "" + +msgid "Rectangle" +msgstr "" + +msgid "Printable Space" +msgstr "" + +msgid "X" +msgstr "" + +msgid "Y" +msgstr "" + +msgid "Hot Bed STL" +msgstr "" + +msgid "Load stl" +msgstr "" + +msgid "Hot Bed SVG" +msgstr "" + +msgid "Load svg" +msgstr "" + +msgid "Max Print Height" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The file exceeds %d MB, please import again." +msgstr "" + +msgid "Exception in obtaining file size, please import again." +msgstr "" + +msgid "Preset path is not find, please reselect vendor." +msgstr "" + +msgid "The printer model was not found, please reselect." +msgstr "" + +msgid "The nozzle diameter is not fond, place reselect." +msgstr "" + +msgid "The printer preset is not fond, place reselect." +msgstr "" + +msgid "Printer Preset" +msgstr "" + +msgid "Filament Preset Template" +msgstr "" + +msgid "Deselect All" +msgstr "" + +msgid "Process Preset Template" +msgstr "" + +msgid "Back Page 1" +msgstr "" + +msgid "" +"You have not yet chosen which printer preset to create based on. Please " +"choose the vendor and model of the printer" +msgstr "" + +msgid "" +"You have entered an illegal input in the printable area section on the first " +"page. Please check before creating it." +msgstr "" + +msgid "The custom printer or model is not inputed, place input." +msgstr "" + +msgid "" +"The printer preset you created already has a preset with the same name. Do " +"you want to overwrite it?\n" +"\tYes: Overwrite the printer preset with the same name, and filament and " +"process presets with the same preset name will be recreated \n" +"and filament and process presets without the same preset name will be " +"reserve.\n" +"\tCancel: Do not create a preset, return to the creation interface." +msgstr "" + +msgid "You need to select at least one filament preset." +msgstr "" + +msgid "You need to select at least one process preset." +msgstr "" + +msgid "Create filament presets failed. As follows:\n" +msgstr "" + +msgid "Create process presets failed. As follows:\n" +msgstr "" + +msgid "Vendor is not find, please reselect." +msgstr "" + +msgid "Current vendor has no models, please reselect." +msgstr "" + +msgid "" +"You have not selected the vendor and model or inputed the custom vendor and " +"model." +msgstr "" + +msgid "" +"There may be escape characters in the custom printer vendor or model. Please " +"delete and re-enter." +msgstr "" + +msgid "" +"All inputs in the custom printer vendor or model are spaces. Please re-enter." +msgstr "" + +msgid "Please check bed printable shape and origin input." +msgstr "" + +msgid "" +"You have not yet selected the printer to replace the nozzle, please choose." +msgstr "" + +msgid "Create Printer Successful" +msgstr "" + +msgid "Create Filament Successful" +msgstr "" + +msgid "Printer Created" +msgstr "" + +msgid "Please go to printer settings to edit your presets" +msgstr "" + +msgid "Filament Created" +msgstr "" + +msgid "" +"Please go to filament setting to edit your presets if you need.\n" +"Please note that nozzle temperature, hot bed temperature, and maximum " +"volumetric speed have a significant impact on printing quality. Please set " +"them carefully." +msgstr "" + +msgid "Printer Setting" +msgstr "" + +msgid "Export Configs" +msgstr "" + +msgid "Printer config bundle(.orca_printer)" +msgstr "" + +msgid "Filament bundle(.orca_filament)" +msgstr "" + +msgid "Printer presets(.zip)" +msgstr "" + +msgid "Filament presets(.zip)" +msgstr "" + +msgid "Process presets(.zip)" +msgstr "" + +msgid "initialize fail" +msgstr "" + +msgid "add file fail" +msgstr "" + +msgid "add bundle structure file fail" +msgstr "" + +msgid "finalize fail" +msgstr "" + +msgid "open zip written fail" +msgstr "" + +msgid "Export successful" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The '%s' folder already exists in the current directory. Do you want to " +"clear it and rebuild it.\n" +"If not, a time suffix will be added, and you can modify the name after " +"creation." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer. \n" +"Can be shared with others." +msgstr "" + +msgid "" +"User's fillment preset set. \n" +"Can be shared with others." +msgstr "" + +msgid "" +"Only display printer names with changes to printer, filament, and process " +"presets." +msgstr "" + +msgid "Only display the filament names with changes to filament presets." +msgstr "" + +msgid "" +"Only printer names with user printer presets will be displayed, and each " +"preset you choose will be exported as a zip." +msgstr "" + +msgid "" +"Only the filament names with user filament presets will be displayed, \n" +"and all user filament presets in each filament name you select will be " +"exported as a zip." +msgstr "" + +msgid "" +"Only printer names with changed process presets will be displayed, \n" +"and all user process presets in each printer name you select will be " +"exported as a zip." +msgstr "" + +msgid "Please select at least one printer or filament." +msgstr "" + +msgid "Please select a type you want to export" +msgstr "" + +msgid "Edit Filament" +msgstr "" + +msgid "Filament presets under this filament" +msgstr "" + +msgid "" +"Note: If the only preset under this filament is deleted, the filament will " +"be deleted after exiting the dialog." +msgstr "" + +msgid "Presets inherited by other presets can not be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +msgid "Delete Preset" +msgstr "" + +msgid "Are you sure to delete the selected preset?" +msgstr "" + +msgid "Delete preset" +msgstr "" + +msgid "+ Add Preset" +msgstr "" + +msgid "Delete Filament" +msgstr "" + +msgid "" +"All the filament presets belong to this filament would be deleted. \n" +"If you are using this filament on your printer, please reset the filament " +"information for that slot." +msgstr "" + +msgid "Delete filament" +msgstr "" + +msgid "Add Preset" +msgstr "" + +msgid "Add preset for new printer" +msgstr "" + +msgid "Copy preset from filament" +msgstr "" + +msgid "The filament choice not find filament preset, please reselect it" +msgstr "" + +msgid "[Delete Required]" +msgstr "" + +msgid "Edit Preset" +msgstr "" + +msgid "For more information, please check out Wiki" +msgstr "" + +msgid "Collapse" +msgstr "" + +msgid "Daily Tips" +msgstr "" + +msgid "Need select printer" +msgstr "" + +msgid "The start, end or step is not valid value." +msgstr "" + +msgid "" +"Unable to calibrate: maybe because the set calibration value range is too " +"large, or the step is too small" +msgstr "" + +msgid "Physical Printer" +msgstr "" + +msgid "Print Host upload" +msgstr "" + +msgid "Could not get a valid Printer Host reference" +msgstr "" + +msgid "Success!" +msgstr "" + +msgid "Refresh Printers" +msgstr "" + +msgid "" +"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" +"signed certificate." +msgstr "" + +msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "" + +msgid "Open CA certificate file" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"On this system, %s uses HTTPS certificates from the system Certificate Store " +"or Keychain." +msgstr "" + +msgid "" +"To use a custom CA file, please import your CA file into Certificate Store / " +"Keychain." +msgstr "" + +msgid "Connection to printers connected via the print host failed." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Mismatched type of print host: %s" +msgstr "" + +msgid "Connection to AstroBox works correctly." +msgstr "" + +msgid "Could not connect to AstroBox" +msgstr "" + +msgid "Note: AstroBox version at least 1.1.0 is required." +msgstr "" + +msgid "Connection to Duet works correctly." +msgstr "" + +msgid "Could not connect to Duet" +msgstr "" + +msgid "Unknown error occured" +msgstr "" + +msgid "Wrong password" +msgstr "" + +msgid "Could not get resources to create a new connection" +msgstr "" + +msgid "Upload not enabled on FlashAir card." +msgstr "" + +msgid "Connection to FlashAir works correctly and upload is enabled." +msgstr "" + +msgid "Could not connect to FlashAir" +msgstr "" + +msgid "" +"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " +"is required." +msgstr "" + +msgid "Connection to MKS works correctly." +msgstr "" + +msgid "Could not connect to MKS" +msgstr "" + +msgid "Connection to OctoPrint works correctly." +msgstr "" + +msgid "Could not connect to OctoPrint" +msgstr "" + +msgid "Note: OctoPrint version at least 1.1.0 is required." +msgstr "" + +msgid "Connection to Prusa SL1 / SL1S works correctly." +msgstr "" + +msgid "Could not connect to Prusa SLA" +msgstr "" + +msgid "Connection to PrusaLink works correctly." +msgstr "" + +msgid "Could not connect to PrusaLink" +msgstr "" + +msgid "Storages found" +msgstr "" + +#. TRN %1% = storage path +#, possible-boost-format +msgid "%1% : read only" +msgstr "" + +#. TRN %1% = storage path +#, possible-boost-format +msgid "%1% : no free space" +msgstr "" + +#. TRN %1% = host +#, possible-boost-format +msgid "Upload has failed. There is no suitable storage found at %1%." +msgstr "" + +msgid "Connection to Prusa Connect works correctly." +msgstr "" + +msgid "Could not connect to Prusa Connect" +msgstr "" + +msgid "Connection to Repetier works correctly." +msgstr "" + +msgid "Could not connect to Repetier" +msgstr "" + +msgid "Note: Repetier version at least 0.90.0 is required." +msgstr "" + +#, possible-boost-format +msgid "" +"HTTP status: %1%\n" +"Message body: \"%2%\"" +msgstr "" + +#, possible-boost-format +msgid "" +"Parsing of host response failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" + +#, possible-boost-format +msgid "" +"Enumeration of host printers failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" #: resources/data/hints.ini: [hint:Precise wall] msgid "Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?" @@ -13159,7 +13187,7 @@ msgid "Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooli msgstr "" #: resources/data/hints.ini: [hint:Air filtration] -msgid "Air filtration/Exhuast Fan\nDid you know that OrcaSlicer can support Air filtration/Exhuast Fan?" +msgid "Air filtration/Exhaust Fan\nDid you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" #: resources/data/hints.ini: [hint:G-code window] diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index 6a35ba2849..72d1149acb 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2024-02-17 22:49+0100\n" "Last-Translator: \n" "Language-Team: \n" @@ -3690,6 +3690,68 @@ msgstr "" msgid "default" msgstr "per defecte" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Perfils" + +msgid "Print settings" +msgstr "Configuració d'impressio" + +msgid "Filament settings" +msgstr "Configuració del Filament" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Configuració de la Impressora" + msgid "parameter name" msgstr "nom del paràmetre" @@ -3883,9 +3945,6 @@ msgstr "Imprimir" msgid "Printer" msgstr "Impressora" -msgid "Print settings" -msgstr "Configuració d'impressio" - msgid "Custom g-code" msgstr "Codi-G personalitzat" @@ -5418,12 +5477,6 @@ msgstr "Comparar els perfils" msgid "View all object's settings" msgstr "Veure tots els paràmetres de l'objecte" -msgid "Filament settings" -msgstr "Configuració del Filament" - -msgid "Printer settings" -msgstr "Configuració de la Impressora" - msgid "Remove current plate (if not last one)" msgstr "Treure la placa actual ( si no és l'última )" @@ -6175,9 +6228,6 @@ msgstr "" "Si està activat, fa els clculs automàticament cada vegada que canviï el " "color." -msgid "Presets" -msgstr "Perfils" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Sincronització automàtica dels perfils de l'usuari ( Impressora/Filament/" @@ -8665,6 +8715,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generant Faldilla i Vora d'Adherència" @@ -9584,21 +9661,19 @@ msgstr "Assegurar el gruix de la carcassa vertical" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Afegir farciment sòlid a prop de les superfícies inclinades per garantir el " -"gruix vertical requerit ( capes sòlides superior+inferior )." - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11681,6 +11756,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -15285,6 +15399,13 @@ msgstr "" "augmentar adequadament la temperatura del llit pot reduir la probabilitat de " "deformació." +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Afegir farciment sòlid a prop de les superfícies inclinades per garantir " +#~ "el gruix vertical requerit ( capes sòlides superior+inferior )." + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 5631b65098..74d12bfce0 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2023-09-30 15:15+0200\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -3616,6 +3616,68 @@ msgstr "" msgid "default" msgstr "výchozí" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Předvolby" + +msgid "Print settings" +msgstr "Nastavení tisku" + +msgid "Filament settings" +msgstr "Nastavení filamentu" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Nastavení tiskárny" + msgid "parameter name" msgstr "název parametru" @@ -3809,9 +3871,6 @@ msgstr "Tisk" msgid "Printer" msgstr "Tiskárna" -msgid "Print settings" -msgstr "Nastavení tisku" - msgid "Custom g-code" msgstr "" @@ -5331,12 +5390,6 @@ msgstr "Porovnání přednastavení" msgid "View all object's settings" msgstr "Zobrazit všechna nastavení objektu" -msgid "Filament settings" -msgstr "Nastavení filamentu" - -msgid "Printer settings" -msgstr "Nastavení tiskárny" - msgid "Remove current plate (if not last one)" msgstr "Odebrat aktuální podložku (pokud není poslední)" @@ -6066,9 +6119,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Předvolby" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Automatická synchronizace uživatelských předvoleb (Tiskárna/Filament/Proces)" @@ -8485,6 +8535,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generování Obrysu a Límce" @@ -9329,21 +9406,19 @@ msgstr "Zajistit tloušťku svislých stěn" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn " -"(vrchních a spodních plných vrstev)" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11306,6 +11381,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14663,6 +14777,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn " +#~ "(vrchních a spodních plných vrstev)" + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index f18a2697d3..1705d0326a 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -681,7 +681,7 @@ msgstr "Text drehen" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "Text verschieben" +msgstr "Text verschieben" msgid "Set Mirror" msgstr "Spiegel setzen" @@ -3730,6 +3730,68 @@ msgstr "" msgid "default" msgstr "Standard" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Voreinstellungen" + +msgid "Print settings" +msgstr "Druckeinstellungen" + +msgid "Filament settings" +msgstr "Filamenteinstellungen" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Drucker-Einstellungen" + msgid "parameter name" msgstr "Parametername" @@ -3923,9 +3985,6 @@ msgstr "aktuelle Platte drucken" msgid "Printer" msgstr "Drucker" -msgid "Print settings" -msgstr "Druckeinstellungen" - msgid "Custom g-code" msgstr "Benutzerdefinierter G-Code" @@ -5465,12 +5524,6 @@ msgstr "Profile vergleichen" msgid "View all object's settings" msgstr "Alle Einstellungen des Objekts anzeigen" -msgid "Filament settings" -msgstr "Filamenteinstellungen" - -msgid "Printer settings" -msgstr "Drucker-Einstellungen" - msgid "Remove current plate (if not last one)" msgstr "entferne aktuelle Platte (wenn nicht die letzte)" @@ -6230,9 +6283,6 @@ msgstr "Reinigungsvolumen: Auto-Berechnung bei jeder Farbänderung." msgid "If enabled, auto-calculate everytime the color changed." msgstr "Wenn aktiviert, wird bei jeder Farbänderung automatisch berechnet." -msgid "Presets" -msgstr "Voreinstellungen" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "Benutzerprofile automatisch synchronisieren (Drucker/Filament/Prozess)" @@ -7103,12 +7153,11 @@ msgid "" msgstr "" "Wenn Sie diese Option aktivieren, wird die Form des Modells geändert. Wenn " "Ihr Druck präzise Abmessungen erfordert oder Teil einer Baugruppe ist, ist " -"es wichtig, zu überprüfen, ob diese Änderung der Geometrie die Funktionalität " -"Ihres Drucks beeinträchtigt." +"es wichtig, zu überprüfen, ob diese Änderung der Geometrie die " +"Funktionalität Ihres Drucks beeinträchtigt." msgid "Are you sure you want to enable this option?" -msgstr "" -"Sind Sie sicher, dass Sie diese Option aktivieren möchten?" +msgstr "Sind Sie sicher, dass Sie diese Option aktivieren möchten?" msgid "" "Layer height is too small.\n" @@ -7673,7 +7722,8 @@ msgstr "Wähle Voreinstellungen zum Vergleich aus" msgid "" "You can only transfer to current active profile because it has been modified." msgstr "" -"Sie können nur in das aktuelle aktive Profil übertragen, da es geändert wurde." +"Sie können nur in das aktuelle aktive Profil übertragen, da es geändert " +"wurde." msgid "" "Transfer the selected options from left preset to the right.\n" @@ -8753,6 +8803,33 @@ msgstr "" "Das Einstellen der Ruckgeschwindigkeit zu niedrig kann zu Artefakten auf " "gebogenen Oberflächen führen" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generieren von Schürze und Rand (skirt & brim)" @@ -9205,8 +9282,8 @@ msgid "" msgstr "" "Verbessern Sie die Schalenpräzision, indem Sie den Abstand der äußeren Wand " "anpassen. Dies verbessert auch die Schichtkonsistenz.\n" -"Hinweis: Diese Einstellung wird nur wirksam, wenn die Wandsequenz auf " -"Inner-Outer konfiguriert ist." +"Hinweis: Diese Einstellung wird nur wirksam, wenn die Wandsequenz auf Inner-" +"Outer konfiguriert ist." msgid "Only one wall on top surfaces" msgstr "Nur eine Wand auf den oberen Flächen" @@ -9703,29 +9780,20 @@ msgstr "Sicherstellung der vertikalen Wanddicke" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die " -"vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)." -msgid "Further reduce solid infill on walls (beta)" -msgstr "Weitere Reduzierung des festen Infill an den Wänden (experimentell)" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Reduziert das feste Infill an den Wänden weiter. Da nur sehr wenig Infill " -"zur Unterstützung der massiven Oberflächen verwendet wird, stellen Sie " -"sicher, dass Sie eine ausreichende Anzahl von Wänden verwenden, um das Teil " -"auf schrägen Oberflächen zu stützen.\n" -"\n" -"Für stark geneigte Oberflächen ist diese Option nicht geeignet, da sie eine " -"zu dünne obere Schicht erzeugt und deaktiviert werden sollte." msgid "Top surface pattern" msgstr "Muster der Oberfläche" @@ -9910,11 +9978,11 @@ msgid "" "\n" "This option will be disabled if sprial vase mode is enabled." msgstr "" -"Die Richtung, in der die Wand-Schleifen extrudiert werden" -"Standardmäßig werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei " -"denn, die Umkehrung bei ungeraden Schichten ist aktiviert. Wenn Sie dies auf " -"eine Option außer Auto setzen, wird die Wandrichtung unabhängig von der " -"Umkehrung bei ungeraden Schichten erzwungen.\n" +"Die Richtung, in der die Wand-Schleifen extrudiert werdenStandardmäßig " +"werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei denn, die " +"Umkehrung bei ungeraden Schichten ist aktiviert. Wenn Sie dies auf eine " +"Option außer Auto setzen, wird die Wandrichtung unabhängig von der Umkehrung " +"bei ungeraden Schichten erzwungen.\n" "Diese Option wird deaktiviert, wenn der Spiral-Vase-Modus aktiviert ist." msgid "Counter clockwise" @@ -9966,13 +10034,13 @@ msgstr "" "Diese Option legt den minimalen Punkt für den erlaubten Bett-Mesh-Bereich " "fest. Aufgrund des XY-Offsets der Sonde sind die meisten Drucker nicht in " "der Lage, das gesamte Bett abzutasten. Um sicherzustellen, dass der " -"Abtastpunkt nicht außerhalb des Bettbereichs liegt, sollten die minimalen und " -"maximalen Punkte des Bett-Mesh entsprechend festgelegt werden. OrcaSlicer " -"stellt sicher, dass die Werte adaptive_bed_mesh_min/adaptive_bed_mesh_max " -"diese Min-/Max-Punkte nicht überschreiten. Diese Informationen können in der " -"Regel vom Druckerhersteller bezogen werden. Die Standardeinstellung ist " -"(-99999, -99999), was bedeutet, dass es keine Grenzen gibt und somit das " -"Abtasten über das gesamte Bett ermöglicht wird." +"Abtastpunkt nicht außerhalb des Bettbereichs liegt, sollten die minimalen " +"und maximalen Punkte des Bett-Mesh entsprechend festgelegt werden. " +"OrcaSlicer stellt sicher, dass die Werte adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max diese Min-/Max-Punkte nicht überschreiten. Diese " +"Informationen können in der Regel vom Druckerhersteller bezogen werden. Die " +"Standardeinstellung ist (-99999, -99999), was bedeutet, dass es keine " +"Grenzen gibt und somit das Abtasten über das gesamte Bett ermöglicht wird." msgid "Bed mesh max" msgstr "Bett Max Abtastbereich" @@ -9990,13 +10058,13 @@ msgstr "" "Diese Option legt den maximalen Punkt für den erlaubten Bett-Mesh-Bereich " "fest. Aufgrund des XY-Offsets der Sonde sind die meisten Drucker nicht in " "der Lage, das gesamte Bett abzutasten. Um sicherzustellen, dass der " -"Abtastpunkt nicht außerhalb des Bettbereichs liegt, sollten die minimalen und " -"maximalen Punkte des Bett-Mesh entsprechend festgelegt werden. OrcaSlicer " -"stellt sicher, dass die Werte adaptive_bed_mesh_min/adaptive_bed_mesh_max " -"diese Min-/Max-Punkte nicht überschreiten. Diese Informationen können in der " -"Regel vom Druckerhersteller bezogen werden. Die Standardeinstellung ist " -"(99999, 99999), was bedeutet, dass es keine Grenzen gibt und somit das " -"Abtasten über das gesamte Bett ermöglicht wird." +"Abtastpunkt nicht außerhalb des Bettbereichs liegt, sollten die minimalen " +"und maximalen Punkte des Bett-Mesh entsprechend festgelegt werden. " +"OrcaSlicer stellt sicher, dass die Werte adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max diese Min-/Max-Punkte nicht überschreiten. Diese " +"Informationen können in der Regel vom Druckerhersteller bezogen werden. Die " +"Standardeinstellung ist (99999, 99999), was bedeutet, dass es keine Grenzen " +"gibt und somit das Abtasten über das gesamte Bett ermöglicht wird." msgid "Probe point distance" msgstr "Abstand der Abtastpunkte" @@ -11353,8 +11421,8 @@ msgid "" "cooling is enabled." msgstr "" "Die minimale Druckgeschwindigkeit, die der Drucker einhält, um zu versuchen, " -"die minimale Schichtzeit einzuhalten, wenn die Verlangsamung für eine bessere " -"Schichtkühlung aktiviert ist." +"die minimale Schichtzeit einzuhalten, wenn die Verlangsamung für eine " +"bessere Schichtkühlung aktiviert ist." msgid "Nozzle diameter" msgstr "Düsendurchmesser" @@ -11829,10 +11897,51 @@ msgstr "" "um das endgültige Produkt glatter und nahtloser aussehen zu lassen." msgid "Scarf joint seam (beta)" -msgstr "Schaltnaht (Beta)" +msgstr "Schaltnaht (Beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." -msgstr "Benutze Schaltnaht um die Sichtbarkeit der Naht zu minimieren und die Nahtstärke zu erhöhen." +msgstr "" +"Benutze Schaltnaht um die Sichtbarkeit der Naht zu minimieren und die " +"Nahtstärke zu erhöhen." + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" msgid "Scarf start height" msgstr "Start Höhe des Schalnaht" @@ -13213,14 +13322,17 @@ msgid "Is extruder used?" msgstr "Wird der Extruder verwendet?" msgid "Vector of bools stating whether a given extruder is used in the print." -msgstr "Vektor von Booleschen Werten, die angeben, ob ein bestimmter Extruder im Druck verwendet wird." - +msgstr "" +"Vektor von Booleschen Werten, die angeben, ob ein bestimmter Extruder im " +"Druck verwendet wird." msgid "Volume per extruder" msgstr "Volumen pro Extruder" msgid "Total filament volume extruded per extruder during the entire print." -msgstr "Gesamtes Filamentvolumen, das pro Extruder während des gesamten Drucks extrudiert wurde." +msgstr "" +"Gesamtes Filamentvolumen, das pro Extruder während des gesamten Drucks " +"extrudiert wurde." msgid "Total toolchanges" msgstr "Gesamte Anzahl der Werkzeugwechsel" @@ -13280,11 +13392,11 @@ msgid "" "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" "Example: 'x:100% y:50% z:100'." -msgstr "Enthält eine Zeichenfolge mit Informationen darüber, welche Skalierung auf die einzelnen Objekte angewendet wurde. Die Indizierung der Objekte ist nullbasiert (das erste Objekt hat den Index 0).\nBeispiel: 'x:100% y:50% z:100'." - -msgid "Scale per instance" -msgstr "Skalierung pro Instanz" - +msgstr "" +"Enthält eine Zeichenfolge mit Informationen darüber, welche Skalierung auf " +"die einzelnen Objekte angewendet wurde. Die Indizierung der Objekte ist " +"nullbasiert (das erste Objekt hat den Index 0).\n" +"Beispiel: 'x:100% y:50% z:100'." msgid "Input filename without extension" msgstr "Eingabedateiname ohne Erweiterung" @@ -13360,8 +13472,8 @@ msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Name der Filamentvorgabe, die zum Slicen verwendet wird. Die Variable ist ein " -"Vektor, der einen Namen für jeden Extruder enthält." +"Name der Filamentvorgabe, die zum Slicen verwendet wird. Die Variable ist " +"ein Vektor, der einen Namen für jeden Extruder enthält." msgid "Printer preset name" msgstr "Name des Druckervorgaben" @@ -13379,7 +13491,9 @@ msgid "Layer number" msgstr "Schichtnummer" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." -msgstr "Index der aktuellen Schicht. Einsbasiert (d.h. die erste Schicht ist Nummer 1)." +msgstr "" +"Index der aktuellen Schicht. Einsbasiert (d.h. die erste Schicht ist Nummer " +"1)." msgid "Layer z" msgstr "Layer z" @@ -13388,7 +13502,8 @@ msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." msgstr "" -"Höhe der aktuellen Schicht über dem Druckbett, gemessen an der Oberseite der Schicht." +"Höhe der aktuellen Schicht über dem Druckbett, gemessen an der Oberseite der " +"Schicht." msgid "Maximal layer z" msgstr "Maximale Schichtdicke z" @@ -13396,7 +13511,6 @@ msgstr "Maximale Schichtdicke z" msgid "Height of the last layer above the print bed." msgstr "Höhe der letzten Schicht über dem Druckbett." - msgid "Filament extruder ID" msgstr "Extruder-ID des Filaments" @@ -15494,6 +15608,35 @@ msgstr "" "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die " "Wahrscheinlichkeit von Verwerfungen verringert werden kann." +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die " +#~ "vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)." + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Weitere Reduzierung des festen Infill an den Wänden (experimentell)" + +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Reduziert das feste Infill an den Wänden weiter. Da nur sehr wenig Infill " +#~ "zur Unterstützung der massiven Oberflächen verwendet wird, stellen Sie " +#~ "sicher, dass Sie eine ausreichende Anzahl von Wänden verwenden, um das " +#~ "Teil auf schrägen Oberflächen zu stützen.\n" +#~ "\n" +#~ "Für stark geneigte Oberflächen ist diese Option nicht geeignet, da sie " +#~ "eine zu dünne obere Schicht erzeugt und deaktiviert werden sollte." + +#~ msgid "Scale per instance" +#~ msgstr "Skalierung pro Instanz" + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 6572acc9f8..7fb357e1ce 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3557,6 +3557,68 @@ msgstr "" msgid "default" msgstr "default" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Presets" + +msgid "Print settings" +msgstr "Print settings" + +msgid "Filament settings" +msgstr "Filament settings" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Printer settings" + msgid "parameter name" msgstr "parameter name" @@ -3750,9 +3812,6 @@ msgstr "Print" msgid "Printer" msgstr "Printer" -msgid "Print settings" -msgstr "Print settings" - msgid "Custom g-code" msgstr "" @@ -5238,12 +5297,6 @@ msgstr "Compare presets" msgid "View all object's settings" msgstr "View all object's settings" -msgid "Filament settings" -msgstr "Filament settings" - -msgid "Printer settings" -msgstr "Printer settings" - msgid "Remove current plate (if not last one)" msgstr "" @@ -5958,9 +6011,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Presets" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "Auto sync user presets (Printer/Filament/Process)" @@ -8332,6 +8382,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generating skirt & brim" @@ -9151,21 +9228,19 @@ msgstr "Ensure vertical shell thickness" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)." - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -10935,6 +11010,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14092,6 +14206,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)." + #~ msgid "Configuration package updated to " #~ msgstr "Configuration package updated to " diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 0cbc42a923..05ed03bfa7 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: Carlos Fco. Caruncho Serrano \n" "Language-Team: \n" @@ -3704,6 +3704,68 @@ msgstr "" msgid "default" msgstr "por defecto" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Perfiles" + +msgid "Print settings" +msgstr "Configuración de impresión" + +msgid "Filament settings" +msgstr "Ajustes del filamento" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Ajustes de la impresora" + msgid "parameter name" msgstr "nombre del parámetro" @@ -3897,9 +3959,6 @@ msgstr "Imprimir" msgid "Printer" msgstr "Impresora" -msgid "Print settings" -msgstr "Configuración de impresión" - msgid "Custom g-code" msgstr "G-Code personalizado" @@ -5428,12 +5487,6 @@ msgstr "Comparar justes" msgid "View all object's settings" msgstr "Ver todos los ajustes del objeto" -msgid "Filament settings" -msgstr "Ajustes del filamento" - -msgid "Printer settings" -msgstr "Ajustes de la impresora" - msgid "Remove current plate (if not last one)" msgstr "Quitar bandeja actual (si no es la última)" @@ -6191,9 +6244,6 @@ msgstr "Volumenes de descarga: Auto calcular en cada cambio de color." msgid "If enabled, auto-calculate everytime the color changed." msgstr "Si está activado, auto calcula en cada cambio de color." -msgid "Presets" -msgstr "Perfiles" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Sincronización automática de los perfiles del usuario (Impresora/Filamento/" @@ -8688,6 +8738,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generando falda y borde de adherencia" @@ -9616,21 +9693,19 @@ msgstr "Detección de paredes delgadas" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Añadir relleno sólido al lado de capas inclinadas para garantizar el grosor " -"de carcasa vertical (capas sólidas superior+inferior)" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11710,6 +11785,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -15318,6 +15432,13 @@ msgstr "" "aumentar adecuadamente la temperatura del lecho térmico puede reducir la " "probabilidad de deformaciones." +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Añadir relleno sólido al lado de capas inclinadas para garantizar el " +#~ "grosor de carcasa vertical (capas sólidas superior+inferior)" + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index b8504b1a50..cba6c6e013 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-10 08:01+0100\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril, Thomas Lété\n" @@ -4150,7 +4150,7 @@ msgstr "Le volume:" msgid "Size:" msgstr "Taille:" -#, boost-format +#, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " "separate the conflicted objects farther (%s <-> %s)." @@ -7195,8 +7195,8 @@ msgstr "Ignorer" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour d’essuyage timelapse\".\n" @@ -7348,9 +7348,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " -"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " -"être imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" +"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur le plateau froid." msgid "Engineering plate" msgstr "Plaque Engineering" @@ -8725,8 +8725,8 @@ msgstr "" msgid "The prime tower is not supported in \"By object\" print." msgstr "" -"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par " -"objet\"." +"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par objet" +"\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " @@ -8842,6 +8842,33 @@ msgstr "" "Un réglage trop bas de la vitesse de saccade peut entraîner des artefacts " "sur les surfaces courbes." +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Génération jupe et bord" @@ -9802,30 +9829,20 @@ msgstr "Assurer l'épaisseur verticale de la coque" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides " -"supérieure+inférieure)." -msgid "Further reduce solid infill on walls (beta)" -msgstr "Réduire davantage le remplissage solide des parois (expérimental)" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Réduit encore davantage les remplissages solides appliqués aux parois. Étant " -"donné que le remplissage des surfaces solides sera très limité, assurez-vous " -"que vous utilisez un nombre suffisant de parois pour soutenir la partie sur " -"les surfaces inclinées.\n" -"\n" -"Pour les surfaces fortement inclinées, cette option n’est pas adaptée car " -"elle génère une couche supérieure trop fine et doit être désactivée." msgid "Top surface pattern" msgstr "Motif de surface supérieure" @@ -10745,10 +10762,10 @@ msgstr "Ventilateur à pleine vitesse à la couche" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à " "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche " @@ -13939,9 +13956,9 @@ msgstr "" "Wiki.\n" "\n" "Habituellement, la calibration est inutile. Lorsque vous démarrez une " -"impression d'une seule couleur/matériau, avec l'option \"Calibration du " -"débit\" cochée dans le menu de démarrage de l'impression, l'imprimante " -"suivra l'ancienne méthode de calibration du filament avant l'impression.\n" +"impression d'une seule couleur/matériau, avec l'option \"Calibration du débit" +"\" cochée dans le menu de démarrage de l'impression, l'imprimante suivra " +"l'ancienne méthode de calibration du filament avant l'impression.\n" "Lorsque vous démarrez une impression multi-couleurs/matériaux, l'imprimante " "utilise le paramètre de compensation par défaut pour le filament lors de " "chaque changement de filament, ce qui donne un bon résultat dans la plupart " @@ -14731,8 +14748,8 @@ msgstr "" "Voulez-vous le réécrire ?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers, Please go to printer selection" msgstr "" "Nous renommerions les préréglages en « Vendor Type Serial @printer you " @@ -15739,6 +15756,33 @@ msgstr "" "déformer, tels que l’ABS, une augmentation appropriée de la température du " "plateau chauffant peut réduire la probabilité de déformation." +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " +#~ "garantir l'épaisseur verticale de la coque (couches solides supérieure" +#~ "+inférieure)." + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Réduire davantage le remplissage solide des parois (expérimental)" + +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Réduit encore davantage les remplissages solides appliqués aux parois. " +#~ "Étant donné que le remplissage des surfaces solides sera très limité, " +#~ "assurez-vous que vous utilisez un nombre suffisant de parois pour " +#~ "soutenir la partie sur les surfaces inclinées.\n" +#~ "\n" +#~ "Pour les surfaces fortement inclinées, cette option n’est pas adaptée car " +#~ "elle génère une couche supérieure trop fine et doit être désactivée." + #~ msgid "Text-Rotate" #~ msgstr "Rotation du texte" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 497a35b7f6..70c60a4387 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3581,6 +3581,68 @@ msgstr "" msgid "default" msgstr "alapértelmezett" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Presets" + +msgid "Print settings" +msgstr "Nyomtatási beállítások" + +msgid "Filament settings" +msgstr "Filament beállítások" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Nyomtató beállítások" + msgid "parameter name" msgstr "paraméter neve" @@ -3774,9 +3836,6 @@ msgstr "Nyomtatás" msgid "Printer" msgstr "Nyomtató" -msgid "Print settings" -msgstr "Nyomtatási beállítások" - msgid "Custom g-code" msgstr "" @@ -5265,12 +5324,6 @@ msgstr "Beállítások összehasonlítása" msgid "View all object's settings" msgstr "Összes objektum beállításainak megtekintése" -msgid "Filament settings" -msgstr "Filament beállítások" - -msgid "Printer settings" -msgstr "Nyomtató beállítások" - msgid "Remove current plate (if not last one)" msgstr "" @@ -5989,9 +6042,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Presets" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Felhasználói beállítások automatikus szinkronizálása (Nyomtató/Filament/" @@ -8400,6 +8450,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Szoknya & perem generálása" @@ -9222,21 +9299,19 @@ msgstr "Függőleges héjvastagság biztosítása" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"A függőleges héjvastagság biztosítása érdekében szilárd kitöltést alkalmaz a " -"lejtős felületek közelében." - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11014,6 +11089,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14184,6 +14298,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "A függőleges héjvastagság biztosítása érdekében szilárd kitöltést " +#~ "alkalmaz a lejtős felületek közelében." + #~ msgid "Configuration package updated to " #~ msgstr "Konfigurációs csomag frissítve a következőre " diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 88826d7770..72c6df486f 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3702,6 +3702,68 @@ msgstr "" msgid "default" msgstr "predefinito" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Preset" + +msgid "Print settings" +msgstr "Impostazioni di stampa" + +msgid "Filament settings" +msgstr "Impostazioni Filamento" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Impostazioni stampante" + msgid "parameter name" msgstr "nome parametro" @@ -3895,9 +3957,6 @@ msgstr "Stampa" msgid "Printer" msgstr "Stampante" -msgid "Print settings" -msgstr "Impostazioni di stampa" - msgid "Custom g-code" msgstr "G-code personalizzato" @@ -5426,12 +5485,6 @@ msgstr "Confronta i preset" msgid "View all object's settings" msgstr "Visualizza tutte le impostazioni oggetto" -msgid "Filament settings" -msgstr "Impostazioni Filamento" - -msgid "Printer settings" -msgstr "Impostazioni stampante" - msgid "Remove current plate (if not last one)" msgstr "Rimuovere la piastra corrente (se non l'ultima)" @@ -6186,9 +6239,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "Se abilitato, calcola automaticamente ogni volta che il colore cambia." -msgid "Presets" -msgstr "Preset" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Sincronizzazione automatica preset utente (stampante/filamento/processo)" @@ -7078,8 +7128,8 @@ msgstr "Ignora" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -8202,8 +8252,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " -"firmware\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" +"\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -8704,6 +8754,33 @@ msgstr "" "L'impostazione di una velocità di strappo troppo bassa potrebbe causare " "artefatti sulle superfici curve" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generazione skirt & brim" @@ -9659,31 +9736,20 @@ msgstr "Garantisci spessore verticale del guscio" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"Aggiunge un riempimento solido in prossimità delle superfici inclinate per " -"garantire lo spessore verticale del guscio (layers solidi superiori e " -"inferiori)." -msgid "Further reduce solid infill on walls (beta)" -msgstr "Ridurre ulteriormente il riempimento solido sulle pareti (beta)" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Riduce ulteriormente qualsiasi riempimento solido applicato alle pareti. " -"Poiché le superfici solide di supporto del riempimento saranno molto " -"limitate, assicurarsi di utilizzare un numero adeguato di pareti per " -"sostenere la parte su superfici inclinate.\n" -"\n" -"Per superfici fortemente inclinate, questa opzione non è adatta in quanto " -"genererebbe uno strato superiore troppo sottile e dovrebbe essere " -"disabilitata." msgid "Top surface pattern" msgstr "Trama superfice superiore" @@ -10598,17 +10664,16 @@ msgstr "Massima velocità della ventola al layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "La velocità della ventola aumenterà linearmente da zero al livello " -"\"close_fan_the_first_x_layers\" al massimo al livello " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" verrà ignorato se " -"inferiore a \"close_fan_the_first_x_layers\", nel qual caso la ventola " -"funzionerà alla massima velocità consentita al livello " -"\"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" al massimo al livello \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" verrà ignorato se inferiore a " +"\"close_fan_the_first_x_layers\", nel qual caso la ventola funzionerà alla " +"massima velocità consentita al livello \"close_fan_the_first_x_layers\" + 1." msgid "Support interface fan speed" msgstr "Supporta la velocità della ventola dell'interfaccia" @@ -11818,6 +11883,45 @@ msgstr "" "Utilizzare il giunto a sciarpa per ridurre al minimo la visibilità della " "cucitura e aumentare la resistenza della cucitura." +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "Altezza di partenza della sciarpa" @@ -14490,8 +14594,8 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers, Please go to printer selection" msgstr "" "Rinomineremo le preimpostazioni come \"Tipo di fornitore seriale @printer " @@ -15488,6 +15592,34 @@ msgstr "" "aumentare in modo appropriato la temperatura del piano riscaldato può " "ridurre la probabilità di deformazione." +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Aggiunge un riempimento solido in prossimità delle superfici inclinate " +#~ "per garantire lo spessore verticale del guscio (layers solidi superiori e " +#~ "inferiori)." + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Ridurre ulteriormente il riempimento solido sulle pareti (beta)" + +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Riduce ulteriormente qualsiasi riempimento solido applicato alle pareti. " +#~ "Poiché le superfici solide di supporto del riempimento saranno molto " +#~ "limitate, assicurarsi di utilizzare un numero adeguato di pareti per " +#~ "sostenere la parte su superfici inclinate.\n" +#~ "\n" +#~ "Per superfici fortemente inclinate, questa opzione non è adatta in quanto " +#~ "genererebbe uno strato superiore troppo sottile e dovrebbe essere " +#~ "disabilitata." + #~ msgid " " #~ msgstr " " @@ -15524,8 +15656,8 @@ msgstr "" #~ msgstr "Nessun layer sparso (SPERIMENTALE)" #~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you " -#~ "selected\". \n" +#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" +#~ "\". \n" #~ "To add preset for more prinetrs, Please go to printer selection" #~ msgstr "" #~ "Rinomineremo le impostazioni predefinite come \"Tipo di fornitore seriale " diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 009fe369ae..e341b03aac 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3498,6 +3498,68 @@ msgstr "" msgid "default" msgstr "デフォルト" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Presets" + +msgid "Print settings" +msgstr "造形設定" + +msgid "Filament settings" +msgstr "フィラメント設定" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "プリンター設定" + msgid "parameter name" msgstr "パラメータ名" @@ -3690,9 +3752,6 @@ msgstr "造形する" msgid "Printer" msgstr "プリンター" -msgid "Print settings" -msgstr "造形設定" - msgid "Custom g-code" msgstr "" @@ -5161,12 +5220,6 @@ msgstr "プリセットを比較" msgid "View all object's settings" msgstr "全てのオブジェクトの設定" -msgid "Filament settings" -msgstr "フィラメント設定" - -msgid "Printer settings" -msgstr "プリンター設定" - msgid "Remove current plate (if not last one)" msgstr "" @@ -5875,9 +5928,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Presets" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "ユーザープリセットの自動同期 (プリンター/フィラメント/プロセス)" @@ -8186,6 +8236,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "スカートとブリムを生成" @@ -8965,19 +9042,19 @@ msgstr "壁の厚さを確保" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "傾斜面にソリッドインフィルを追加" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -10697,6 +10774,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -13786,6 +13902,11 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "傾斜面にソリッドインフィルを追加" + #~ msgid "Configuration package updated to " #~ msgstr "構成パッケージがアップデートされました" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index 53448f7f5d..c4fa1033d8 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2024-01-01 14:28+0900\n" "Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply." "github.com>, crwusiz \n" @@ -3583,6 +3583,68 @@ msgstr "" msgid "default" msgstr "기본값" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "사전 설정" + +msgid "Print settings" +msgstr "프린터 설정" + +msgid "Filament settings" +msgstr "필라멘트 설정" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "프린터 설정" + msgid "parameter name" msgstr "매개변수 이름" @@ -3776,9 +3838,6 @@ msgstr "출력" msgid "Printer" msgstr "프린터" -msgid "Print settings" -msgstr "프린터 설정" - msgid "Custom g-code" msgstr "사용자 정의 G코드" @@ -5276,12 +5335,6 @@ msgstr "사전 설정 비교" msgid "View all object's settings" msgstr "모든 개체 설정 보기" -msgid "Filament settings" -msgstr "필라멘트 설정" - -msgid "Printer settings" -msgstr "프린터 설정" - msgid "Remove current plate (if not last one)" msgstr "현재 플레이트 제거(마지막 플레이트가 아닌 경우)" @@ -6010,9 +6063,6 @@ msgstr "플러시 볼륨: 색상이 변경될 때마다 자동 계산됩니다." msgid "If enabled, auto-calculate everytime the color changed." msgstr "활성화하면 색상이 변경될 때마다 자동 계산됩니다." -msgid "Presets" -msgstr "사전 설정" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "사용자 사전 설정 자동 동기화(프린터/필라멘트/프로세스)" @@ -8398,6 +8448,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "스커트 & 브림 생성 중" @@ -9250,21 +9327,19 @@ msgstr "수직 쉘 두께 확보" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"경사진 표면 근처에 꽉찬 내부 채우기를 추가하여 수직 쉘 두께를 보장합니다 (상" -"단+하단 꽉찬 레이어)" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11211,6 +11286,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14632,6 +14746,13 @@ msgstr "" "ABS 등 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이" "면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "경사진 표면 근처에 꽉찬 내부 채우기를 추가하여 수직 쉘 두께를 보장합니다 " +#~ "(상단+하단 꽉찬 레이어)" + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index f1e87dd92c..eb3af65bc1 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3610,6 +3610,68 @@ msgstr "" msgid "default" msgstr "Standaard" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Presets" + +msgid "Print settings" +msgstr "Print instellingen" + +msgid "Filament settings" +msgstr "Filament instellingen" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Printer instellingen" + msgid "parameter name" msgstr "parameternaam" @@ -3803,9 +3865,6 @@ msgstr "Print" msgid "Printer" msgstr "Printer" -msgid "Print settings" -msgstr "Print instellingen" - msgid "Custom g-code" msgstr "" @@ -5301,12 +5360,6 @@ msgstr "Instellingen vergelijken" msgid "View all object's settings" msgstr "Alle instellingen van het object weergeven" -msgid "Filament settings" -msgstr "Filament instellingen" - -msgid "Printer settings" -msgstr "Printer instellingen" - msgid "Remove current plate (if not last one)" msgstr "" @@ -6041,9 +6094,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Presets" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Gebruikersvoorinstellingen automatisch synchroniseren (printer/filament/" @@ -8478,6 +8528,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Skirt en brim worden gegenereerd" @@ -9308,21 +9385,19 @@ msgstr "Zorg voor een verticale schaaldikte" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Voeg dichte vulling toe in de buurt van hellende oppervlakken om de " -"verticale schaaldikte te garanderen (boven+onder vaste lagen)." - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11119,6 +11194,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14298,6 +14412,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Voeg dichte vulling toe in de buurt van hellende oppervlakken om de " +#~ "verticale schaaldikte te garanderen (boven+onder vaste lagen)." + #~ msgid "Configuration package updated to " #~ msgstr "Het configuratiebestand is bijgewerkt naar " diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index 16d76b52ee..4dd458ebc8 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-02 19:55+0100\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: \n" "Last-Translator: Krzysztof Morga \n" "Language-Team: \n" @@ -1501,9 +1501,6 @@ msgstr "" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Wybierz jeden lub więcej plików (3mf/step/stl/svg/obj/amf):" -msgid "Choose ZIP file" -msgstr "Wybierz plik ZIP" - msgid "Choose one file (gcode/3mf):" msgstr "Wybierz jeden plik (gcode/3mf):" @@ -1574,13 +1571,6 @@ msgstr "Trwające wgrywanie" msgid "Select a G-code file:" msgstr "Wybierz plik G-code:" -msgid "" -"Could not start URL download. Destination folder is not set. Please choose " -"destination folder in Configuration Wizard." -msgstr "" -"Nie można rozpocząć pobierania pliku z adresu URL. Folder docelowy nie jest " -"ustawiony. Proszę wybrać folder docelowy w Kreatorze Konfiguracji" - msgid "Import File" msgstr "Importuj plik" @@ -4410,12 +4400,6 @@ msgstr "Importuj 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" msgstr "Wczytaj model" -msgid "Import Zip Archive" -msgstr "Importuj archiwum ZIP" - -msgid "Load models contained within a zip archive" -msgstr "Wczytaj modele zawarte w archiwum ZIP" - msgid "Import Configs" msgstr "Importuj konfiguracje" @@ -5354,12 +5338,12 @@ msgstr[2] "%1$d obiektów zostało załadowanych jako części obiektu wycięteg msgid "ERROR" msgstr "BŁĄD" -msgid "COMPLETED" -msgstr "ZAKOŃCZONO" - msgid "CANCELED" msgstr "ANULOWANO" +msgid "COMPLETED" +msgstr "ZAKOŃCZONO" + msgid "Cancel upload" msgstr "Anuluj przesyłanie" @@ -5946,22 +5930,6 @@ msgstr "nie zawiera prawidłowego kodu G." msgid "Error occurs while loading G-code file" msgstr "Wystąpił błąd podczas wczytywania pliku z kodem G" -#. TRN %1% is archive path -#, boost-format -msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "Nie udało załadować się archiwum ZIP z ścieżki %1%." - -#. TRN: First argument = path to file, second argument = error description -#, boost-format -msgid "Failed to unzip file to %1%: %2%" -msgstr "Nie udało się rozpakować pliku do %1%: %2%" - -#, boost-format -msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." -msgstr "" -"Nie udało się znaleźć rozpakowanego pliku pod adresem %1%. Rozpakowywanie " -"pliku nie powiodło się." - msgid "Drop project file" msgstr "Upuść plik projektu" @@ -6327,9 +6295,6 @@ msgstr "Okres kopii zapasowej w sekundach." msgid "Downloads" msgstr "Lokalizacja pobierania" -msgid "Allow downloads from Printables.com" -msgstr "Zezwól na pobieranie modeli z Printables.com" - msgid "Dark Mode" msgstr "Tryb ciemny" @@ -7128,22 +7093,11 @@ msgstr "Dostosuj" msgid "Ignore" msgstr "Ignoruj" -msgid "" -"When using scarf joint, we recommend the following settings:\n" -"print outer wall first, disable wipe before external loop, reduce outer wall " -"speed to no greater than 50mm/s, and don't use random or nearest seam " -"position" -msgstr "" -"Przy korzystaniu ze szwu szalikowego zalecamy następujące ustawienia: \n" -"drukuj zewnętrzną ściane jako pierwszą, wyłączenie czyszczenia przed " -"zewnętrzną pętlą, ograniczenie prędkości zewnętrznej ściany do maksymalnie " -"50 mm/s oraz unikanie stosowania pozycji szwu \"losowo\" lub \"najbliższy\"." - msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Podczas nagrywania timelapse'a bez głowicy narzędziowej zaleca się dodanie " "\"Wieżyczki Czyszczącej Timelapse\" \n" @@ -8753,6 +8707,33 @@ msgstr "" "Ustawienie zbyt niskiej prędkości jerk może prowadzić do artefaktów na " "zakrzywionych powierzchniach." +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Generowanie Skirtu i Brimu" @@ -8938,10 +8919,10 @@ msgid "" msgstr "" "Unikaj ruchów nad obrysami-\n" "Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli " -"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad " -"obrysami\" zostanie zignorowana dla tej ścieżki. Długość objazdu można " -"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z " -"długości ruchu bezpośredniego." +"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami" +"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować " +"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu " +"bezpośredniego." msgid "mm or %" msgstr "mm lub %" @@ -9501,9 +9482,9 @@ msgid "" "quality for needle and small details" msgstr "" "Włącz tę opcję, aby zwolnić prędkość druku, aby czas końcowej warstwy nie " -"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości " -"wentylatora\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może " -"to poprawić jakość chłodzenia dla igieł i małych detali" +"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości wentylatora" +"\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może to poprawić " +"jakość chłodzenia dla igieł i małych detali" msgid "Normal printing" msgstr "Normalne drukowanie" @@ -9700,27 +9681,20 @@ msgstr "Zapewnij stałą grubość pionowej powłoki" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"Dodaj pełne wypełnienie w pobliżu nachylonych powierzchni, aby zagwarantować " -"pionową grubość powłoki (górne+ dolne pełne warstwy)" -msgid "Further reduce solid infill on walls (beta)" -msgstr "Dodatkowe zmniejszenie gęstości wypełnienia na obwodzie (beta)" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Dodatkowo redukuje ilość stałego wypełnienia aplikowanego na ściany. \n" -"\n" -"Ponieważ ilość wypełnienia podpory powierzchni stałych będzie bardzo " -"ograniczona, upewnij się, że używasz odpowiedniej liczby ścian do podparcia " -"części na nachylonych powierzchniach." msgid "Top surface pattern" msgstr "Wzór górnej powierzchni" @@ -10622,10 +10596,10 @@ msgstr "Pełna prędkość wentylatora na warstwie" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie " "\"close_fan_the_first_x_layers\" do maksymalnej na warstwie " @@ -11832,6 +11806,45 @@ msgstr "" "Zastosuj szew szalikowy, aby zminimalizować widoczność szwu i zwiększyć jego " "wytrzymałość." +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "Wysokość początkowa szwu szalikowego" @@ -11840,7 +11853,6 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" - "Początkowa wysokość szwu szalikowego.\n" "Ta wartość może być określona w milimetrach lub jako procent bieżącej " "wysokości warstwy. Domyślna wartość tego parametru to 0." @@ -12042,8 +12054,8 @@ msgstr "" "poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb \"Wygładź\", " "głowica narzędziowa przesunie się nad wieżę po wydrukowaniu każdej warstwy, " "a następnie zrobi zdjęcie. Ponieważ stopiony filament może wyciekać z dyszy " -"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie " -"\"Wygładź\" do czyszczenia dyszy." +"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie \"Wygładź" +"\" do czyszczenia dyszy." msgid "Traditional" msgstr "Tradycyjny" @@ -12123,10 +12135,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania " -"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może " -"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej " -"wartości na rozsądnie niskim poziomie." +"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" +"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " +"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " +"rozsądnie niskim poziomie." msgid "Slicing Mode" msgstr "Tryb cięcia" @@ -14462,8 +14474,8 @@ msgstr "" "Czy chcesz go zastąpić?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers, Please go to printer selection" msgstr "" "Nazwa profilu zostanie zmieniona na \"Producent Typ Rodzaj @nazwa drukarki, " @@ -15108,8 +15120,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Air filtration] msgid "" -"Air filtration/Exhuast Fan\n" -"Did you know that OrcaSlicer can support Air filtration/Exhuast Fan?" +"Air filtration/Exhaust Fan\n" +"Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" "Filtracja powietrza/Wentylator wyciągowy\n" "Czy wiesz, że OrcaSlicer może obsługiwać filtrację powietrza/wentylator " @@ -15445,6 +15457,83 @@ msgstr "" "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może " "zmniejszyć prawdopodobieństwo odkształceń." +#~ msgid "Choose ZIP file" +#~ msgstr "Wybierz plik ZIP" + +#~ msgid "" +#~ "Could not start URL download. Destination folder is not set. Please " +#~ "choose destination folder in Configuration Wizard." +#~ msgstr "" +#~ "Nie można rozpocząć pobierania pliku z adresu URL. Folder docelowy nie " +#~ "jest ustawiony. Proszę wybrać folder docelowy w Kreatorze Konfiguracji" + +#~ msgid "Import Zip Archive" +#~ msgstr "Importuj archiwum ZIP" + +#~ msgid "Load models contained within a zip archive" +#~ msgstr "Wczytaj modele zawarte w archiwum ZIP" + +#, boost-format +#~ msgid "Loading of a ZIP archive on path %1% has failed." +#~ msgstr "Nie udało załadować się archiwum ZIP z ścieżki %1%." + +#, boost-format +#~ msgid "Failed to unzip file to %1%: %2%" +#~ msgstr "Nie udało się rozpakować pliku do %1%: %2%" + +#, boost-format +#~ msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." +#~ msgstr "" +#~ "Nie udało się znaleźć rozpakowanego pliku pod adresem %1%. Rozpakowywanie " +#~ "pliku nie powiodło się." + +#~ msgid "Allow downloads from Printables.com" +#~ msgstr "Zezwól na pobieranie modeli z Printables.com" + +#~ msgid "" +#~ "When using scarf joint, we recommend the following settings:\n" +#~ "print outer wall first, disable wipe before external loop, reduce outer " +#~ "wall speed to no greater than 50mm/s, and don't use random or nearest " +#~ "seam position" +#~ msgstr "" +#~ "Przy korzystaniu ze szwu szalikowego zalecamy następujące ustawienia: \n" +#~ "drukuj zewnętrzną ściane jako pierwszą, wyłączenie czyszczenia przed " +#~ "zewnętrzną pętlą, ograniczenie prędkości zewnętrznej ściany do " +#~ "maksymalnie 50 mm/s oraz unikanie stosowania pozycji szwu \"losowo\" lub " +#~ "\"najbliższy\"." + +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Dodaj pełne wypełnienie w pobliżu nachylonych powierzchni, aby " +#~ "zagwarantować pionową grubość powłoki (górne+ dolne pełne warstwy)" + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Dodatkowe zmniejszenie gęstości wypełnienia na obwodzie (beta)" + +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Dodatkowo redukuje ilość stałego wypełnienia aplikowanego na ściany. \n" +#~ "\n" +#~ "Ponieważ ilość wypełnienia podpory powierzchni stałych będzie bardzo " +#~ "ograniczona, upewnij się, że używasz odpowiedniej liczby ścian do " +#~ "podparcia części na nachylonych powierzchniach." + +#~ msgid "" +#~ "Air filtration/Exhuast Fan\n" +#~ "Did you know that OrcaSlicer can support Air filtration/Exhuast Fan?" +#~ msgstr "" +#~ "Filtracja powietrza/Wentylator wyciągowy\n" +#~ "Czy wiesz, że OrcaSlicer może obsługiwać filtrację powietrza/wentylator " +#~ "wyciągowy?" + #~ msgid "Scarf joint seam" #~ msgstr "Szew szalikowy (beta)" @@ -16196,8 +16285,8 @@ msgstr "" #~ "Elevation is too low for object. Use the \"Pad around object\" feature to " #~ "print the object without elevation." #~ msgstr "" -#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół " -#~ "modelu\", aby wydrukować model bez podniesienia." +#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół modelu" +#~ "\", aby wydrukować model bez podniesienia." #~ msgid "" #~ "The endings of the support pillars will be deployed on the gap between " @@ -16320,14 +16409,6 @@ msgstr "" #~ "Wybrany plik 3MF zawiera model pomalowany do Multi Material przy pomocy " #~ "nowszej wersji OrcaSlicer i nie jest kompatybilny." -#~ msgid "" -#~ "Air filtration/Exhaust Fan\n" -#~ "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" -#~ msgstr "" -#~ "Filtracja powietrza/Wentylator wyciągowy\n" -#~ "Czy wiesz, że OrcaSlicer może obsługiwać filtrację powietrza/wentylator " -#~ "wyciągowy?" - #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 7cd004a43a..30547bd445 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer V2.0.0-dev Nightly Builds\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2024-02-11 23:36+0700\n" "Last-Translator: \n" "Language-Team: \n" @@ -3699,6 +3699,68 @@ msgstr "" msgid "default" msgstr "По ум." +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Профили" + +msgid "Print settings" +msgstr "Настройки печати" + +msgid "Filament settings" +msgstr "Настройки прутка" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Настройки принтера" + msgid "parameter name" msgstr "Имя параметра" @@ -3892,9 +3954,6 @@ msgstr "Печать" msgid "Printer" msgstr "Профиль принтера" -msgid "Print settings" -msgstr "Настройки печати" - msgid "Custom g-code" msgstr "Пользовательский G-код" @@ -5424,12 +5483,6 @@ msgstr "Сравнение профилей" msgid "View all object's settings" msgstr "Просмотр всех настроек модели" -msgid "Filament settings" -msgstr "Настройки прутка" - -msgid "Printer settings" -msgstr "Настройки принтера" - msgid "Remove current plate (if not last one)" msgstr "Удалить текущую печатную пластину (кроме последней)" @@ -6188,9 +6241,6 @@ msgstr "" "Если включено, выполняется автоматический перерасчет объёма очистки при " "каждом изменении цвета." -msgid "Presets" -msgstr "Профили" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "Автосинхронизация пользовательских профилей (принтера/прутка/процесса)" @@ -8700,6 +8750,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Генерация юбки и каймы" @@ -9639,30 +9716,20 @@ msgstr "Обеспечивать верт. толщину оболочки" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"Добавление сплошного заполнения вблизи наклонных поверхностей для " -"обеспечения вертикальной толщины оболочки (верхний+нижний сплошные слои)." -msgid "Further reduce solid infill on walls (beta)" -msgstr "Сокращение сплошного заполнения на периметрах (экспер.)" - -# ??? -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Ещё больше сокращает количество сплошного заполнения, наносимого на " -"периметры. Поскольку количество заполнения, поддерживающих твердые " -"поверхности, будет очень ограничено, убедитесь, что у вас достаточно " -"периметров для поддержки частей на наклонных поверхностях.\n" -"\n" -"Для поверхностей с большим уклоном эта опция не подходит, так как верхний " -"слой получится слишком тонким, и её следует отключить." msgid "Top surface pattern" msgstr "Шаблон заполнения верхней поверхности" @@ -11736,6 +11803,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -15363,6 +15469,33 @@ msgstr "" "ABS, повышение температуры подогреваемого стола может снизить вероятность " "коробления?" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Добавление сплошного заполнения вблизи наклонных поверхностей для " +#~ "обеспечения вертикальной толщины оболочки (верхний+нижний сплошные слои)." + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Сокращение сплошного заполнения на периметрах (экспер.)" + +# ??? +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Ещё больше сокращает количество сплошного заполнения, наносимого на " +#~ "периметры. Поскольку количество заполнения, поддерживающих твердые " +#~ "поверхности, будет очень ограничено, убедитесь, что у вас достаточно " +#~ "периметров для поддержки частей на наклонных поверхностях.\n" +#~ "\n" +#~ "Для поверхностей с большим уклоном эта опция не подходит, так как верхний " +#~ "слой получится слишком тонким, и её следует отключить." + #~ msgid "Text-Rotate" #~ msgstr "Поворот текста" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index ad2ad1564c..b6f0d6d4e9 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3570,6 +3570,68 @@ msgstr "" msgid "default" msgstr "standard" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Förinställningar" + +msgid "Print settings" +msgstr "Utskrifts inställningar" + +msgid "Filament settings" +msgstr "Filament inställningar" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Skrivarens inställningar" + msgid "parameter name" msgstr "Parameter namn" @@ -3763,9 +3825,6 @@ msgstr "Skriv ut" msgid "Printer" msgstr "Skrivare" -msgid "Print settings" -msgstr "Utskrifts inställningar" - msgid "Custom g-code" msgstr "" @@ -5250,12 +5309,6 @@ msgstr "Jämför inställningar" msgid "View all object's settings" msgstr "Se alla objektens inställningar" -msgid "Filament settings" -msgstr "Filament inställningar" - -msgid "Printer settings" -msgstr "Skrivarens inställningar" - msgid "Remove current plate (if not last one)" msgstr "" @@ -5972,9 +6025,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Förinställningar" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Automatisk synkronisering av användarens förinställningar (skrivare/filament/" @@ -8352,6 +8402,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Skapar Skirt & Brim" @@ -9164,21 +9241,19 @@ msgstr "Säkerställ vertikal skaltjocklek" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Lägg till massiv fyllning nära sluttande ytor för att garantera den " -"vertikala skal tjockleken (topp+bottenfasta lager)." - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -10951,6 +11026,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14110,6 +14224,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Lägg till massiv fyllning nära sluttande ytor för att garantera den " +#~ "vertikala skal tjockleken (topp+bottenfasta lager)." + #~ msgid "Configuration package updated to " #~ msgstr "Konfigurations paket uppdaterat till " diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index 0ea10e93c6..5fa6509587 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2024-03-03 22:12+0300\n" "Last-Translator: Olcay ÖREN\n" "Language-Team: Türkçe\n" @@ -3652,6 +3652,68 @@ msgstr "" msgid "default" msgstr "varsayılan" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Ön ayarlar" + +msgid "Print settings" +msgstr "Yazdırma ayarları" + +msgid "Filament settings" +msgstr "Filament Ayarları" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Yazıcı Ayarları" + msgid "parameter name" msgstr "parametre adı" @@ -3845,9 +3907,6 @@ msgstr "Yazdır" msgid "Printer" msgstr "Yazıcı" -msgid "Print settings" -msgstr "Yazdırma ayarları" - msgid "Custom g-code" msgstr "Özel g-code" @@ -5371,12 +5430,6 @@ msgstr "Ön ayarları karşılaştır" msgid "View all object's settings" msgstr "Nesnenin tüm ayarları" -msgid "Filament settings" -msgstr "Filament Ayarları" - -msgid "Printer settings" -msgstr "Yazıcı Ayarları" - msgid "Remove current plate (if not last one)" msgstr "Mevcut tablayı kaldırın (eğer sonuncusu değilse)" @@ -6119,9 +6172,6 @@ msgstr "Hacimleri temizleme: Renk her değiştiğinde otomatik olarak hesapla." msgid "If enabled, auto-calculate everytime the color changed." msgstr "Etkinleştirilirse, renk her değiştiğinde otomatik hesapla." -msgid "Presets" -msgstr "Ön ayarlar" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "Kullanıcı ön ayarları otomatik senkronizasyon (Yazıcı/Filament/İşlem)" @@ -6959,9 +7009,10 @@ msgid "" "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" -"Bu seçeneğin etkinleştirilmesi modelin şeklini değiştirecektir. Baskınız kesin " -"boyutlar gerektiriyorsa veya bir montajın parçasıysa geometrideki bu değişikliğin " -"baskınızın işlevselliğini etkileyip etkilemediğini bir kez daha kontrol etmeniz önemlidir." +"Bu seçeneğin etkinleştirilmesi modelin şeklini değiştirecektir. Baskınız " +"kesin boyutlar gerektiriyorsa veya bir montajın parçasıysa geometrideki bu " +"değişikliğin baskınızın işlevselliğini etkileyip etkilemediğini bir kez daha " +"kontrol etmeniz önemlidir." msgid "Are you sure you want to enable this option?" msgstr "Bu seçeneği etkinleştirmek istediğinizden emin misiniz?" @@ -8579,7 +8630,35 @@ msgstr "Plaka %d: %s, %s filamentini desteklemiyor" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" -"Sarsıntı hızının çok düşük ayarlanması kavisli yüzeylerde bozulmalara neden olabilir" +"Sarsıntı hızının çok düşük ayarlanması kavisli yüzeylerde bozulmalara neden " +"olabilir" + +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" msgid "Generating skirt & brim" msgstr "Etek ve kenar oluşturma" @@ -9017,8 +9096,8 @@ msgid "" msgstr "" "Dış duvar aralığını ayarlayarak kabuk hassasiyetini artırın. Bu aynı zamanda " "katman tutarlılığını da artırır.\n" -"Not: Bu ayar yalnızca duvar sırası İç-Dış olarak yapılandırıldığında " -"etkili olacaktır." +"Not: Bu ayar yalnızca duvar sırası İç-Dış olarak yapılandırıldığında etkili " +"olacaktır." msgid "Only one wall on top surfaces" msgstr "Üst yüzeylerde yalnızca bir duvar" @@ -9137,7 +9216,8 @@ msgstr "" "Bu seçenek, havşa delikleri için köprüler oluşturarak bunların desteksiz " "yazdırılmasına olanak tanır. Mevcut modlar şunları içerir:\n" "1. Yok: Köprü oluşturulmaz.\n" -"2. Kısmen Köprülendi: Desteklenmeyen alanın yalnızca bir kısmı köprülenecek.\n" +"2. Kısmen Köprülendi: Desteklenmeyen alanın yalnızca bir kısmı " +"köprülenecek.\n" "3. Feda Katman: Tam bir feda köprü katmanı oluşturulur." msgid "Partially bridged" @@ -9503,28 +9583,20 @@ msgstr "Dikey kabuk kalınlığını onayla" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -"Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına katı " -"dolgu ekleyin (üst + alt katı katmanlar)" -msgid "Further reduce solid infill on walls (beta)" -msgstr "Duvarlardaki katı dolguyu daha da azaltın (deneysel)" - -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" -"Duvarlara uygulanan katı dolguları daha da azaltır. Dolguyu destekleyen katı " -"yüzeyler çok sınırlı olacağından, eğimli yüzeylerde parçayı desteklemek için " -"yeterli sayıda duvar kullandığınızdan emin olun.\n" -"\n" -"Çok eğimli yüzeyler için bu seçenek çok ince bir üst katman oluşturacağından " -"ve devre dışı bırakılması gerektiğinden uygun değildir." msgid "Top surface pattern" msgstr "Üst yüzey deseni" @@ -9700,12 +9772,12 @@ msgid "" "\n" "This option will be disabled if sprial vase mode is enabled." msgstr "" -"Yukarıdan aşağıya bakıldığında duvar döngülerinin ekstrüzyona " -"uğradığı yön.\n" +"Yukarıdan aşağıya bakıldığında duvar döngülerinin ekstrüzyona uğradığı yön.\n" "\n" -"Tek sayıyı ters çevir seçeneği etkinleştirilmedikçe, varsayılan olarak tüm duvarlar " -"saat yönünün tersine ekstrüde edilir. Bunu Otomatik dışında herhangi bir seçeneğe " -"ayarlayın, Ters açıklığa bakılmaksızın duvar yönünü zorlayacaktır.\n" +"Tek sayıyı ters çevir seçeneği etkinleştirilmedikçe, varsayılan olarak tüm " +"duvarlar saat yönünün tersine ekstrüde edilir. Bunu Otomatik dışında " +"herhangi bir seçeneğe ayarlayın, Ters açıklığa bakılmaksızın duvar yönünü " +"zorlayacaktır.\n" "\n" "Spiral vazo modu etkinse bu seçenek devre dışı bırakılacaktır." @@ -9755,15 +9827,15 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Bu seçenek, izin verilen yatak ağ alanı için minimum noktayı ayarlar. " -"Prob XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. " -"Prob noktasının yatak alanı dışına çıkmamasını sağlamak için yatak ağının " -"minimum ve maksimum noktaları uygun şekilde ayarlanmalıdır. OrcaSlicer, " +"Bu seçenek, izin verilen yatak ağ alanı için minimum noktayı ayarlar. Prob " +"XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob noktasının " +"yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum ve " +"maksimum noktaları uygun şekilde ayarlanmalıdır. OrcaSlicer, " "adaptive_bed_mesh_min/adaptive_bed_mesh_max değerlerinin bu min/maks " -"noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın " -"üreticisinden edinilebilir. Varsayılan ayar (-99999, -99999) şeklindedir; " -"bu, herhangi bir sınırın olmadığı anlamına gelir, dolayısıyla yatağın " -"tamamında problamaya izin verilir." +"noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın üreticisinden " +"edinilebilir. Varsayılan ayar (-99999, -99999) şeklindedir; bu, herhangi bir " +"sınırın olmadığı anlamına gelir, dolayısıyla yatağın tamamında problamaya " +"izin verilir." msgid "Bed mesh max" msgstr "Maksimum yatak ağı" @@ -9779,14 +9851,14 @@ msgid "" "means there are no limits, thus allowing probing across the entire bed." msgstr "" "Bu seçenek, izin verilen yatak ağ alanı için maksimum noktayı ayarlar. " -"Probun XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. " -"Prob noktasının yatak alanı dışına çıkmamasını sağlamak için yatak ağının " -"minimum ve maksimum noktaları uygun şekilde ayarlanmalıdır. " -"OrcaSlicer, adaptive_bed_mesh_min/adaptive_bed_mesh_max değerlerinin bu " -"min/maks noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın " -"üreticisinden edinilebilir. Varsayılan ayar (99999, 99999) şeklindedir; bu, " -"herhangi bir sınırın olmadığı anlamına gelir, dolayısıyla yatağın tamamında " -"problamaya izin verilir." +"Probun XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob " +"noktasının yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum " +"ve maksimum noktaları uygun şekilde ayarlanmalıdır. OrcaSlicer, " +"adaptive_bed_mesh_min/adaptive_bed_mesh_max değerlerinin bu min/maks " +"noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın üreticisinden " +"edinilebilir. Varsayılan ayar (99999, 99999) şeklindedir; bu, herhangi bir " +"sınırın olmadığı anlamına gelir, dolayısıyla yatağın tamamında problamaya " +"izin verilir." msgid "Probe point distance" msgstr "Prob noktası mesafesi" @@ -9796,7 +9868,8 @@ msgid "" "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" "Bu seçenek, X ve Y yönleri için prob noktaları arasındaki tercih edilen " -"mesafeyi (ızgara boyutu) ayarlar; varsayılan değer hem X hem de Y için 50 mm'dir." +"mesafeyi (ızgara boyutu) ayarlar; varsayılan değer hem X hem de Y için 50 " +"mm'dir." msgid "Mesh margin" msgstr "Yatak ağı boşluğu" @@ -11116,9 +11189,9 @@ msgid "" "maintain the minimum layer time above, when slow down for better layer " "cooling is enabled." msgstr "" -"Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıdaki minimum " -"katman süresini korumaya çalışmak için yazıcının yavaşlayacağı minimum " -"yazdırma hızı." +"Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıdaki " +"minimum katman süresini korumaya çalışmak için yazıcının yavaşlayacağı " +"minimum yazdırma hızı." msgid "Nozzle diameter" msgstr "Nozul çapı" @@ -11586,8 +11659,48 @@ msgid "Scarf joint seam (beta)" msgstr "Eşarp birleşim yeri dikişi (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." -msgstr "Dikiş görünürlüğünü en aza indirmek ve dikiş mukavemetini arttırmak " -"için eşarp eklemini kullanın." +msgstr "" +"Dikiş görünürlüğünü en aza indirmek ve dikiş mukavemetini arttırmak için " +"eşarp eklemini kullanın." + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" msgid "Scarf start height" msgstr "Eşarp başlangıç ​​yüksekliği" @@ -11614,8 +11727,8 @@ msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Eşarpın uzunluğu. Bu parametrenin 0 a ayarlanması " -"eşarpı etkili bir şekilde devre dışı bırakır." +"Eşarpın uzunluğu. Bu parametrenin 0 a ayarlanması eşarpı etkili bir şekilde " +"devre dışı bırakır." msgid "Scarf steps" msgstr "Eşarp adımları" @@ -15168,6 +15281,31 @@ msgstr "" "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını " "azaltabileceğini biliyor muydunuz?" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına " +#~ "katı dolgu ekleyin (üst + alt katı katmanlar)" + +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Duvarlardaki katı dolguyu daha da azaltın (deneysel)" + +#~ msgid "" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Duvarlara uygulanan katı dolguları daha da azaltır. Dolguyu destekleyen " +#~ "katı yüzeyler çok sınırlı olacağından, eğimli yüzeylerde parçayı " +#~ "desteklemek için yeterli sayıda duvar kullandığınızdan emin olun.\n" +#~ "\n" +#~ "Çok eğimli yüzeyler için bu seçenek çok ince bir üst katman " +#~ "oluşturacağından ve devre dışı bırakılması gerektiğinden uygun değildir." + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 3626d980a6..5595a37060 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2023-08-10 20:25-0400\n" "Last-Translator: \n" "Language-Team: \n" @@ -3600,6 +3600,68 @@ msgstr "" msgid "default" msgstr "за замовчуванням" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "Пресети" + +msgid "Print settings" +msgstr "Параметри друку" + +msgid "Filament settings" +msgstr "Настінні філаменти" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "Налаштування принтера" + msgid "parameter name" msgstr "ім'я параметра" @@ -3793,9 +3855,6 @@ msgstr "Друк" msgid "Printer" msgstr "Принтер" -msgid "Print settings" -msgstr "Параметри друку" - msgid "Custom g-code" msgstr "" @@ -5300,12 +5359,6 @@ msgstr "Порівняти пресети" msgid "View all object's settings" msgstr "Переглянути всі налаштування об'єкта" -msgid "Filament settings" -msgstr "Настінні філаменти" - -msgid "Printer settings" -msgstr "Налаштування принтера" - msgid "Remove current plate (if not last one)" msgstr "" @@ -6026,9 +6079,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "Пресети" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" "Автоматична синхронізація користувацьких пресетів (принтер/філамент/процес)" @@ -8403,6 +8453,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "Створення спідниці та кайми" @@ -9230,21 +9307,19 @@ msgstr "Забезпечення вертикальної товщини обо msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "" -"Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії " -"товщини вертикальної оболонки (верхній + нижній шари твердого тіла)" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11114,6 +11189,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14285,6 +14399,13 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "" +#~ "Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії " +#~ "товщини вертикальної оболонки (верхній + нижній шари твердого тіла)" + #~ msgid "Configuration package updated to " #~ msgstr "Пакет конфігурації оновлено до " diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index 2e45ab8ddc..61269ec2f4 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: SoftFever \n" "Language-Team: \n" @@ -3480,6 +3480,68 @@ msgstr "CF/GF耗材丝丝又硬又脆，在AMS中很容易断裂或卡住，请 msgid "default" msgstr "缺省" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "预设" + +msgid "Print settings" +msgstr "打印设置" + +msgid "Filament settings" +msgstr "耗材丝设置" + +msgid "SLA Materials settings" +msgstr "" + +msgid "Printer settings" +msgstr "打印机设置" + msgid "parameter name" msgstr "参数名称" @@ -3673,9 +3735,6 @@ msgstr "打印" msgid "Printer" msgstr "打印机" -msgid "Print settings" -msgstr "打印设置" - msgid "Custom g-code" msgstr "" @@ -5156,12 +5215,6 @@ msgstr "比较预设" msgid "View all object's settings" msgstr "查看所有对象的配置" -msgid "Filament settings" -msgstr "耗材丝设置" - -msgid "Printer settings" -msgstr "打印机设置" - msgid "Remove current plate (if not last one)" msgstr "移除当前板（如果不是最后一个）" @@ -5853,9 +5906,6 @@ msgstr "冲刷体积：每一次更换颜色时自动计算。" msgid "If enabled, auto-calculate everytime the color changed." msgstr "如果启用，会在每一次更换颜色时自动计算。" -msgid "Presets" -msgstr "预设" - msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "同步用户预设（打印机/耗材丝/工艺）" @@ -8149,6 +8199,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + msgid "Generating skirt & brim" msgstr "正在生成skirt和brim" @@ -8937,19 +9014,19 @@ msgstr "确保垂直外壳厚度" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -10742,6 +10819,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -13959,6 +14075,11 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）" + #~ msgid " " #~ msgstr " " diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 8cb39124c9..5ccef205eb 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-03 09:32+0800\n" +"POT-Creation-Date: 2024-03-10 23:17+0800\n" "PO-Revision-Date: 2023-11-06 14:37+0800\n" "Last-Translator: ablegods \n" "Language-Team: \n" @@ -3632,6 +3632,69 @@ msgstr "含 CF/GF 線材又硬又脆，在 AMS 中很容易斷裂或卡住，請 msgid "default" msgstr "預設" +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "" + +msgid "Search gcode placeholders" +msgstr "" + +msgid "Add selected placeholder to G-code" +msgstr "" + +msgid "Select placeholder" +msgstr "" + +msgid "[Global] Slicing State" +msgstr "" + +msgid "Read Only" +msgstr "" + +msgid "Read Write" +msgstr "" + +msgid "Slicing State" +msgstr "" + +msgid "Print Statistics" +msgstr "" + +msgid "Objects Info" +msgstr "" + +msgid "Dimensions" +msgstr "" + +msgid "Temperatures" +msgstr "" + +msgid "Timestamps" +msgstr "" + +#, boost-format +msgid "Specific for %1%" +msgstr "" + +msgid "Presets" +msgstr "預設" + +msgid "Print settings" +msgstr "列印設定" + +msgid "Filament settings" +msgstr "線材設定" + +msgid "SLA Materials settings" +msgstr "" + +#, fuzzy +msgid "Printer settings" +msgstr "列印設備設定" + msgid "parameter name" msgstr "參數名稱" @@ -3841,9 +3904,6 @@ msgstr "列印" msgid "Printer" msgstr "列印設備" -msgid "Print settings" -msgstr "列印設定" - msgid "Custom g-code" msgstr "" @@ -5380,13 +5440,6 @@ msgstr "比較預設檔" msgid "View all object's settings" msgstr "查看所有物件的設定" -msgid "Filament settings" -msgstr "線材設定" - -#, fuzzy -msgid "Printer settings" -msgstr "列印設備設定" - #, fuzzy msgid "Remove current plate (if not last one)" msgstr "刪除目前列印板（如果不是最後一個）" @@ -6115,9 +6168,6 @@ msgstr "" msgid "If enabled, auto-calculate everytime the color changed." msgstr "" -msgid "Presets" -msgstr "預設" - #, fuzzy msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "同步使用者預設（列印設備/線材/列印品質參數）" @@ -8562,6 +8612,33 @@ msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" + +msgid "" +"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" +"machine_max_speed_y).\n" +"Orca will automatically cap the print speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum speed setting in your printer's configuration to " +"get higher speeds." +msgstr "" + #, fuzzy msgid "Generating skirt & brim" msgstr "正在產生 skirt 和 brim（裙邊）" @@ -9411,19 +9488,19 @@ msgstr "確保垂直外殼厚度" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)" -msgstr "在斜面表面附近增加實心填充，以保證垂直外殼厚度（頂部+底部實心層）" - -msgid "Further reduce solid infill on walls (beta)" +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." msgstr "" -msgid "" -"Further reduces any solid infill applied to walls. As there will be very " -"limited infill supporting solid surfaces, make sure that you are using " -"adequate number of walls to support the part on sloping surfaces.\n" -"\n" -"For heavily sloped surfaces this option is not suitable as it will generate " -"too thin of a top layer and should be disabled." +msgid "Critical Only" +msgstr "" + +msgid "Moderate" msgstr "" msgid "Top surface pattern" @@ -11263,6 +11340,45 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf joint speed" +msgstr "" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also " +"advisable to enable 'Extrusion rate smoothing' if the set speed varies " +"significantly from the speed of the outer or inner walls. If the speed " +"specified here is higher than the speed of the outer or inner walls, the " +"printer will default to the slower of the two speeds. When specified as a " +"percentage (e.g., 80%), the speed is calculated based on the respective " +"outer or inner wall speed. The default value is set to 100%." +msgstr "" + +msgid "Scarf joint flow ratio" +msgstr "" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "" + msgid "Scarf start height" msgstr "" @@ -14536,6 +14652,11 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " +#~ "thickness (top+bottom solid layers)" +#~ msgstr "在斜面表面附近增加實心填充，以保證垂直外殼厚度（頂部+底部實心層）" + #, fuzzy #~ msgid "Configuration package updated to " #~ msgstr "設定檔已更新到" diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index ac0e1b7e65..483d9f4b5e 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -1468,9 +1468,10 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons* if (m_default_object_config.default_jerk > 0) warning_key = check_motion_ability_object_setting(jerk_to_check, max_jerk); if (!warning_key.empty()) { - warning->string = L("The jerk is set higher than the printer's maximum jerk " - "(machine_max_jerk_x/machine_max_jerk_y), resulting in the jerk speed being capped.\nYou might " - "consider increasing the maximum jerk in your printer settings."); + warning->string = L( + "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\nOrca will " + "automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\nYou can adjust the " + "maximum jerk setting in your printer's configuration to get higher speeds."); warning->opt_key = warning_key; } } @@ -1491,10 +1492,11 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons* const auto max_accel = m_config.machine_max_acceleration_extruding.values[0]; warning_key = check_motion_ability_object_setting(accel_to_check, max_accel); if (!warning_key.empty()) { - warning->string = L( - "The acceleration is set higher than the printer's maximum extruding acceleration " - "(machine_max_acceleration_extruding), resulting in the print acceleration being capped.\nYou might " - "consider increasing the maximum acceleration in your printer settings."); + warning->string = L("The acceleration setting exceeds the printer's maximum acceleration " + "(machine_max_acceleration_extruding).\nOrca will " + "automatically cap the acceleration speed to ensure it doesn't surpass the printer's " + "capabilities.\nYou can adjust the " + "machine_max_acceleration_extruding value in your printer's configuration to get higher speeds."); warning->opt_key = warning_key; } } @@ -1509,9 +1511,10 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons* if (warning_key.empty() && m_config.travel_speed > max_speed) warning_key = "travel_speed"; if (!warning_key.empty()) { - warning->string = L("The speed is set higher than the printer's maximum speed " - "(machine_max_speed_x/machine_max_speed_y), resulting in the print speed being capped.\nYou might " - "consider increasing the maximum speed in your printer settings."); + warning->string = L( + "The speed setting exceeds the printer's maximum speed (machine_max_speed_x/machine_max_speed_y).\nOrca will " + "automatically cap the print speed to ensure it doesn't surpass the printer's capabilities.\nYou can adjust the " + "maximum speed setting in your printer's configuration to get higher speeds."); warning->opt_key = warning_key; } }