update po/pot files

This commit is contained in:
SoftFever 2023-07-07 00:07:31 +08:00
parent e94fe296ee
commit 93b8d7aeff
15 changed files with 387 additions and 164 deletions

View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-30 05:30+0200\n"
"POT-Creation-Date: 2023-07-07 00:05+0800\n"
"Language: hu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -5124,8 +5124,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
msgstr ""
msgid "Line width"
@ -6300,6 +6300,9 @@ msgstr ""
msgid "No extrusions under current settings."
msgstr "A jelenlegi beállítások mellett nincsenek extrudálások."
msgid "Bed temperatures for the used filaments differ significantly."
msgstr ""
msgid ""
"Smooth mode of timelapse is not supported when \"by object\" sequence is "
"enabled."
@ -6906,11 +6909,11 @@ msgid "Internal bridge support thickness"
msgstr ""
msgid ""
"If enabled, support loops will be generated under the contours of "
"internal bridges. These support loops could prevent internal bridges from "
"extruding over the air and improve the top surface quality, especially when "
"the sparse infill density is low.This value determines the thickness of the "
"support loops. 0 means disable this feature"
"If enabled, support loops will be generated under the contours of internal "
"bridges.These support loops could prevent internal bridges from extruding "
"over the air and improve the top surface quality, especially when the sparse "
"infill density is low.This value determines the thickness of the support "
"loops. 0 means disable this feature"
msgstr ""
msgid "Top surface pattern"
@ -7430,10 +7433,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -8135,6 +8138,14 @@ msgstr "Hátul"
msgid "Random"
msgstr ""
msgid "Staggered inner seams"
msgstr ""
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""
msgid "Seam gap"
msgstr ""
@ -8196,6 +8207,12 @@ msgstr ""
"Még a tárgyak előtt kerül nyomtatásra és a feladata a fúvóka "
"anyagáramlásának stabilizálása"
msgid "Skirt speed"
msgstr ""
msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed."
msgstr ""
msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated "
"layer time is shorter than this value, to get better cooling for these layers"