3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-18 04:08:02 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

More refactoring on Config XS bindings

Browse source
This commit is contained in:
Alessandro Ranellucci 2015-12-16 12:58:06 +01:00
parent 3c862836f2
commit 934bd43e35
7 changed files with 56 additions and 41 deletions
Download patch file Download diff file Expand all files Collapse all files

8
xs/src/libslic3r/PrintConfig.cpp
View file

@ -304,7 +304,7 @@ PrintConfigDef::PrintConfigDef()
Options["filament_settings_id"].type = coString;
Options["filament_settings_id"].default_value = new ConfigOptionString("");
Options["fill_angle"].type = coInt;
Options["fill_angle"].type = coFloat;
Options["fill_angle"].label = "Fill angle";
Options["fill_angle"].category = "Infill";
Options["fill_angle"].tooltip = "Default base angle for infill orientation. Cross-hatching will be applied to this. Bridges will be infilled using the best direction Slic3r can detect, so this setting does not affect them.";
@ -1220,19 +1220,19 @@ PrintConfigDef::PrintConfigDef()
Options["use_firmware_retraction"].label = "Use firmware retraction";
Options["use_firmware_retraction"].tooltip = "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin.";
Options["use_firmware_retraction"].cli = "use-firmware-retraction!";
Options["use_firmware_retraction"].default_value = new ConfigOptionFloat(false);
Options["use_firmware_retraction"].default_value = new ConfigOptionBool(false);
Options["use_relative_e_distances"].type = coBool;
Options["use_relative_e_distances"].label = "Use relative E distances";
Options["use_relative_e_distances"].tooltip = "If your firmware requires relative E values, check this, otherwise leave it unchecked. Most firmwares use absolute values.";
Options["use_relative_e_distances"].cli = "use-relative-e-distances!";
Options["use_relative_e_distances"].default_value = new ConfigOptionFloat(false);
Options["use_relative_e_distances"].default_value = new ConfigOptionBool(false);
Options["use_volumetric_e"].type = coBool;
Options["use_volumetric_e"].label = "Use volumetric E";
Options["use_volumetric_e"].tooltip = "This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin.";
Options["use_volumetric_e"].cli = "use-volumetric-e!";
Options["use_volumetric_e"].default_value = new ConfigOptionFloat(false);
Options["use_volumetric_e"].default_value = new ConfigOptionBool(false);
Options["vibration_limit"].type = coFloat;
Options["vibration_limit"].label = "Vibration limit (deprecated)";