NEW: support send gcode to third-party printer

Thanks SoftForever for your works to support
sending a gcode file to third-party printer

Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>

src/libslic3r/PrintConfig.cpp

@@ -72,6 +72,23 @@ static t_config_enum_values s_keys_map_PrinterTechnology {
 };
 CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrinterTechnology)
 
+static t_config_enum_values s_keys_map_PrintHostType{
+    { "prusalink",      htPrusaLink },
+    { "octoprint",      htOctoPrint },
+    //{ "duet",           htDuet },
+    //{ "flashair",       htFlashAir },
+    //{ "astrobox",       htAstroBox },
+    //{ "repetier",       htRepetier },
+    //{ "mks",            htMKS }
+};
+CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrintHostType)
+
+static t_config_enum_values s_keys_map_AuthorizationType{
+    { "key",            atKeyPassword },
+    { "user",           atUserPassword }
+};
+CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(AuthorizationType)
+
 static t_config_enum_values s_keys_map_GCodeFlavor {
     { "marlin",         gcfMarlinLegacy },
     { "reprap",         gcfRepRapSprinter },
@@ -343,6 +360,83 @@ void PrintConfigDef::init_common_params()
     def->mode = comDevelop;
     def->set_default_value(new ConfigOptionStrings());
 
+    def = this->add("print_host", coString);
+    def->label = L("Hostname, IP or URL");
+    def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
+        "the hostname, IP address or URL of the printer host instance. "
+        "Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL "
+        "in the following format: https://username:password@your-octopi-address/");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("printhost_apikey", coString);
+    def->label = L("API Key / Password");
+    def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
+        "the API Key or the password required for authentication.");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("printhost_port", coString);
+    def->label = L("Printer");
+    def->tooltip = L("Name of the printer");
+    def->gui_type = ConfigOptionDef::GUIType::select_open;
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("printhost_cafile", coString);
+    def->label = L("HTTPS CA File");
+    def->tooltip = L("Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. "
+        "If left blank, the default OS CA certificate repository is used.");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    // Options used by physical printers
+
+    def = this->add("printhost_user", coString);
+    def->label = L("User");
+    //    def->tooltip = L("");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    def = this->add("printhost_password", coString);
+    def->label = L("Password");
+    //    def->tooltip = L("");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionString(""));
+
+    // Only available on Windows.
+    def = this->add("printhost_ssl_ignore_revoke", coBool);
+    def->label = L("Ignore HTTPS certificate revocation checks");
+    def->tooltip = L("Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. "
+        "One may want to enable this option for self signed certificates if connection fails.");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("preset_names", coStrings);
+    def->label = L("Printer preset names");
+    def->tooltip = L("Names of presets related to the physical printer");
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionStrings());
+
+    def = this->add("printhost_authorization_type", coEnum);
+    def->label = L("Authorization Type");
+    //    def->tooltip = L("");
+    def->enum_keys_map = &ConfigOptionEnum<AuthorizationType>::get_enum_values();
+    def->enum_values.push_back("key");
+    def->enum_values.push_back("user");
+    def->enum_labels.push_back(L("API key"));
+    def->enum_labels.push_back(L("HTTP digest"));
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionEnum<AuthorizationType>(atKeyPassword));
+
     // temporary workaround for compatibility with older Slicer
     {
         def = this->add("preset_name", coString);
@@ -1686,6 +1780,29 @@ void PrintConfigDef::init_fff_params()
     def->mode = comDevelop;
     def->set_default_value(new ConfigOptionFloats { 0.4 });
 
+    def = this->add("host_type", coEnum);
+    def->label = L("Host Type");
+    def->tooltip = L("Slic3r can upload G-code files to a printer host. This field must contain "
+        "the kind of the host.");
+    def->enum_keys_map = &ConfigOptionEnum<PrintHostType>::get_enum_values();
+    def->enum_values.push_back("prusalink");
+    def->enum_values.push_back("octoprint");
+    //def->enum_values.push_back("duet");
+    //def->enum_values.push_back("flashair");
+    //def->enum_values.push_back("astrobox");
+    //def->enum_values.push_back("repetier");
+    //def->enum_values.push_back("mks");
+    def->enum_labels.push_back("PrusaLink");
+    def->enum_labels.push_back("OctoPrint");
+    //def->enum_labels.push_back("Duet");
+    //def->enum_labels.push_back("FlashAir");
+    //def->enum_labels.push_back("AstroBox");
+    //def->enum_labels.push_back("Repetier");
+    //def->enum_labels.push_back("MKS");
+    def->mode = comAdvanced;
+    def->cli = ConfigOptionDef::nocli;
+    def->set_default_value(new ConfigOptionEnum<PrintHostType>(htOctoPrint));
+
     def = this->add("nozzle_volume", coFloat);
     def->label = L("Nozzle volume");
     def->tooltip = L("Volume of nozzle between the cutter and the end of nozzle");