diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json index f230179411..52a54bb592 100644 --- a/resources/profiles/Anker.json +++ b/resources/profiles/Anker.json @@ -147,4 +147,4 @@ "sub_path": "machine/Anker M5C 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index 1b0c2b1ce3..ab14598cd9 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -128,7 +128,6 @@ "name": "fdm_filament_asa", "sub_path": "filament/fdm_filament_asa.json" }, - { "name": "fdm_filament_pa", "sub_path": "filament/fdm_filament_pa.json" @@ -228,4 +227,4 @@ "sub_path": "machine/Anycubic Kobra 2 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json index 7da0816451..8c9ee0597d 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "45", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json index a90be9a8d8..2d4cfc25c5 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.15", "support_speed": "50", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json index 60aeff4705..817eda50ea 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.15", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.15", "support_speed": "100", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json index 162b3df393..5520265308 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.15", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.15", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json index 74ed054806..95987bbdf2 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.15", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.15", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json index c5c44f6438..ebd449a35a 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.15", "support_speed": "50", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json index b9cd1a5e29..4045fd9e25 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "45", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json index 40142dedaf..68e2a4446a 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "50", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json index 33ae7e34e5..2f928c551f 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "100", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json index ac3f74c688..813b9666fd 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json index 06b9ae64d8..06aff1d7a6 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json index dc9c6185ff..a52b52e077 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "50", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json index 5f77dcdfce..a00cd5d723 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.3", "support_speed": "45", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json index 7644b55dc2..133b4c9c24 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.3", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "45", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json index 6a80e2f8ba..8aea7dbeb7 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.3", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.3", "support_speed": "100", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json index 4f7110c090..c96bbfd81f 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.3", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.3", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json index f1041a7389..58a19c4cdc 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.3", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.3", "support_speed": "70", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json index 5ac0003ec3..da36f6d730 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.3", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "45", diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index d78ac14649..ccec8bda16 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "01.07.00.12", + "version": "01.07.00.23", "force_update": "0", "description": "the initial version of BBL configurations", "machine_model_list": [ @@ -20,6 +20,14 @@ { "name": "Bambu Lab P1S", "sub_path": "machine/Bambu Lab P1S.json" + }, + { + "name": "Bambu Lab A1 mini", + "sub_path": "machine/Bambu Lab A1 mini.json" + }, + { + "name": "Bambu Lab X1E", + "sub_path": "machine/Bambu Lab X1E.json" } ], "process_list": [ @@ -67,94 +75,6 @@ "name": "fdm_process_bbl_0.28", "sub_path": "process/fdm_process_bbl_0.28.json" }, - { - "name": "0.08mm Extra Fine @BBL X1C", - "sub_path": "process/0.08mm Extra Fine @BBL X1C.json" - }, - { - "name": "0.12mm Fine @BBL X1C", - "sub_path": "process/0.12mm Fine @BBL X1C.json" - }, - { - "name": "0.16mm Optimal @BBL X1C", - "sub_path": "process/0.16mm Optimal @BBL X1C.json" - }, - { - "name": "0.20mm Standard @BBL X1C", - "sub_path": "process/0.20mm Standard @BBL X1C.json" - }, - { - "name": "0.20mm Strength @BBL X1C", - "sub_path": "process/0.20mm Strength @BBL X1C.json" - }, - { - "name": "0.24mm Draft @BBL X1C", - "sub_path": "process/0.24mm Draft @BBL X1C.json" - }, - { - "name": "0.28mm Extra Draft @BBL X1C", - "sub_path": "process/0.28mm Extra Draft @BBL X1C.json" - }, - { - "name": "0.10mm Standard @BBL X1C 0.2 nozzle", - "sub_path": "process/0.10mm Standard @BBL X1C 0.2 nozzle.json" - }, - { - "name": "0.30mm Standard @BBL X1C 0.6 nozzle", - "sub_path": "process/0.30mm Standard @BBL X1C 0.6 nozzle.json" - }, - { - "name": "0.30mm Standard @BBL X1 0.6 nozzle", - "sub_path": "process/0.30mm Standard @BBL X1 0.6 nozzle.json" - }, - { - "name": "0.40mm Standard @BBL X1C 0.8 nozzle", - "sub_path": "process/0.40mm Standard @BBL X1C 0.8 nozzle.json" - }, - { - "name": "0.40mm Standard @BBL X1 0.8 nozzle", - "sub_path": "process/0.40mm Standard @BBL X1 0.8 nozzle.json" - }, - { - "name": "0.10mm Standard @BBL P1P 0.2 nozzle", - "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json" - }, - { - "name": "0.20mm Standard @BBL P1P", - "sub_path": "process/0.20mm Standard @BBL P1P.json" - }, - { - "name": "0.30mm Standard @BBL P1P 0.6 nozzle", - "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json" - }, - { - "name": "0.08mm Extra Fine @BBL P1P", - "sub_path": "process/0.08mm Extra Fine @BBL P1P.json" - }, - { - "name": "0.12mm Fine @BBL P1P", - "sub_path": "process/0.12mm Fine @BBL P1P.json" - }, - { - "name": "0.16mm Optimal @BBL P1P", - "sub_path": "process/0.16mm Optimal @BBL P1P.json" - }, - { - "name": "0.20mm Strength @BBL P1P", - "sub_path": "process/0.20mm Strength @BBL P1P.json" - }, - { - "name": "0.24mm Draft @BBL P1P", - "sub_path": "process/0.24mm Draft @BBL P1P.json" - }, - { - "name": "0.28mm Extra Draft @BBL P1P", - "sub_path": "process/0.28mm Extra Draft @BBL P1P.json" - }, - { - "name": "0.40mm Standard @BBL P1P 0.8 nozzle", - "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json" - }, { "name": "fdm_process_bbl_0.06_nozzle_0.2", "sub_path": "process/fdm_process_bbl_0.06_nozzle_0.2.json" @@ -171,22 +91,6 @@ "name": "fdm_process_bbl_0.14_nozzle_0.2", "sub_path": "process/fdm_process_bbl_0.14_nozzle_0.2.json" }, - { - "name": "0.06mm Standard @BBL X1C 0.2 nozzle", - "sub_path": "process/0.06mm Standard @BBL X1C 0.2 nozzle.json" - }, - { - "name": "0.08mm Standard @BBL X1C 0.2 nozzle", - "sub_path": "process/0.08mm Standard @BBL X1C 0.2 nozzle.json" - }, - { - "name": "0.12mm Standard @BBL X1C 0.2 nozzle", - "sub_path": "process/0.12mm Standard @BBL X1C 0.2 nozzle.json" - }, - { - "name": "0.14mm Standard @BBL X1C 0.2 nozzle", - "sub_path": "process/0.14mm Standard @BBL X1C 0.2 nozzle.json" - }, { "name": "fdm_process_bbl_0.18_nozzle_0.6", "sub_path": "process/fdm_process_bbl_0.18_nozzle_0.6.json" @@ -203,22 +107,6 @@ "name": "fdm_process_bbl_0.42_nozzle_0.6", "sub_path": "process/fdm_process_bbl_0.42_nozzle_0.6.json" }, - { - "name": "0.18mm Standard @BBL X1C 0.6 nozzle", - "sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json" - }, - { - "name": "0.24mm Standard @BBL X1C 0.6 nozzle", - "sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json" - }, - { - "name": "0.36mm Standard @BBL X1C 0.6 nozzle", - "sub_path": "process/0.36mm Standard @BBL X1C 0.6 nozzle.json" - }, - { - "name": "0.42mm Standard @BBL X1C 0.6 nozzle", - "sub_path": "process/0.42mm Standard @BBL X1C 0.6 nozzle.json" - }, { "name": "fdm_process_bbl_0.24_nozzle_0.8", "sub_path": "process/fdm_process_bbl_0.24_nozzle_0.8.json" @@ -235,25 +123,237 @@ "name": "fdm_process_bbl_0.56_nozzle_0.8", "sub_path": "process/fdm_process_bbl_0.56_nozzle_0.8.json" }, + { + "name": "0.08mm Extra Fine @BBL X1C", + "sub_path": "process/0.08mm Extra Fine @BBL X1C.json" + }, + { + "name": "0.08mm Extra Fine @BBL P1P", + "sub_path": "process/0.08mm Extra Fine @BBL P1P.json" + }, + { + "name": "0.08mm Extra Fine @BBL A1M", + "sub_path": "process/0.08mm Extra Fine @BBL A1M.json" + }, + { + "name": "0.10mm Standard @BBL X1C 0.2 nozzle", + "sub_path": "process/0.10mm Standard @BBL X1C 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @BBL P1P 0.2 nozzle", + "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json" + }, + { + "name": "0.40mm Standard @BBL X1C 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL X1C 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @BBL X1 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL X1 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @BBL P1P 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json" + }, + { + "name": "0.30mm Standard @BBL X1C 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @BBL X1 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL X1 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @BBL P1P 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json" + }, + { + "name": "0.30mm Strength @BBL X1C 0.6 nozzle", + "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.30mm Strength @BBL A1M 0.6 nozzle", + "sub_path": "process/0.30mm Strength @BBL A1M 0.6 nozzle.json" + }, + { + "name": "0.12mm Fine @BBL X1C", + "sub_path": "process/0.12mm Fine @BBL X1C.json" + }, + { + "name": "0.12mm Fine @BBL P1P", + "sub_path": "process/0.12mm Fine @BBL P1P.json" + }, + { + "name": "0.12mm Fine @BBL A1M", + "sub_path": "process/0.12mm Fine @BBL A1M.json" + }, + { + "name": "0.16mm Optimal @BBL X1C", + "sub_path": "process/0.16mm Optimal @BBL X1C.json" + }, + { + "name": "0.16mm Optimal @BBL P1P", + "sub_path": "process/0.16mm Optimal @BBL P1P.json" + }, + { + "name": "0.16mm Optimal @BBL A1M", + "sub_path": "process/0.16mm Optimal @BBL A1M.json" + }, + { + "name": "0.20mm Standard @BBL X1C", + "sub_path": "process/0.20mm Standard @BBL X1C.json" + }, + { + "name": "0.20mm Strength @BBL X1C", + "sub_path": "process/0.20mm Strength @BBL X1C.json" + }, + { + "name": "0.20mm Standard @BBL P1P", + "sub_path": "process/0.20mm Standard @BBL P1P.json" + }, + { + "name": "0.20mm Strength @BBL P1P", + "sub_path": "process/0.20mm Strength @BBL P1P.json" + }, + { + "name": "0.24mm Draft @BBL X1C", + "sub_path": "process/0.24mm Draft @BBL X1C.json" + }, + { + "name": "0.24mm Draft @BBL P1P", + "sub_path": "process/0.24mm Draft @BBL P1P.json" + }, + { + "name": "0.24mm Draft @BBL A1M", + "sub_path": "process/0.24mm Draft @BBL A1M.json" + }, + { + "name": "0.28mm Extra Draft @BBL X1C", + "sub_path": "process/0.28mm Extra Draft @BBL X1C.json" + }, + { + "name": "0.28mm Extra Draft @BBL P1P", + "sub_path": "process/0.28mm Extra Draft @BBL P1P.json" + }, + { + "name": "0.28mm Extra Draft @BBL A1M", + "sub_path": "process/0.28mm Extra Draft @BBL A1M.json" + }, + { + "name": "0.06mm Standard @BBL X1C 0.2 nozzle", + "sub_path": "process/0.06mm Standard @BBL X1C 0.2 nozzle.json" + }, + { + "name": "0.06mm Fine @BBL A1M 0.2 nozzle", + "sub_path": "process/0.06mm Fine @BBL A1M 0.2 nozzle.json" + }, + { + "name": "0.08mm Standard @BBL X1C 0.2 nozzle", + "sub_path": "process/0.08mm Standard @BBL X1C 0.2 nozzle.json" + }, + { + "name": "0.08mm Optimal @BBL A1M 0.2 nozzle", + "sub_path": "process/0.08mm Optimal @BBL A1M 0.2 nozzle.json" + }, + { + "name": "0.12mm Standard @BBL X1C 0.2 nozzle", + "sub_path": "process/0.12mm Standard @BBL X1C 0.2 nozzle.json" + }, + { + "name": "0.12mm Draft @BBL A1M 0.2 nozzle", + "sub_path": "process/0.12mm Draft @BBL A1M 0.2 nozzle.json" + }, + { + "name": "0.14mm Standard @BBL X1C 0.2 nozzle", + "sub_path": "process/0.14mm Standard @BBL X1C 0.2 nozzle.json" + }, + { + "name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle", + "sub_path": "process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json" + }, + { + "name": "0.18mm Standard @BBL X1C 0.6 nozzle", + "sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.18mm Fine @BBL A1M 0.6 nozzle", + "sub_path": "process/0.18mm Fine @BBL A1M 0.6 nozzle.json" + }, + { + "name": "0.24mm Standard @BBL X1C 0.6 nozzle", + "sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.24mm Optimal @BBL A1M 0.6 nozzle", + "sub_path": "process/0.24mm Optimal @BBL A1M 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @BBL X1C 0.6 nozzle", + "sub_path": "process/0.36mm Standard @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @BBL A1M 0.6 nozzle", + "sub_path": "process/0.36mm Draft @BBL A1M 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @BBL X1C 0.6 nozzle", + "sub_path": "process/0.42mm Standard @BBL X1C 0.6 nozzle.json" + }, + { + "name": "0.42mm Extra Draft @BBL A1M 0.6 nozzle", + "sub_path": "process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json" + }, { "name": "0.24mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.24mm Standard @BBL X1C 0.8 nozzle.json" }, + { + "name": "0.24mm Fine @BBL A1M 0.8 nozzle", + "sub_path": "process/0.24mm Fine @BBL A1M 0.8 nozzle.json" + }, { "name": "0.32mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.32mm Standard @BBL X1C 0.8 nozzle.json" }, + { + "name": "0.32mm Optimal @BBL A1M 0.8 nozzle", + "sub_path": "process/0.32mm Optimal @BBL A1M 0.8 nozzle.json" + }, { "name": "0.48mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.48mm Standard @BBL X1C 0.8 nozzle.json" }, + { + "name": "0.48mm Draft @BBL A1M 0.8 nozzle", + "sub_path": "process/0.48mm Draft @BBL A1M 0.8 nozzle.json" + }, { "name": "0.56mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json" }, { - "name": "0.30mm Strength @BBL X1C 0.6 nozzle", - "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json" + "name": "0.56mm Extra Draft @BBL A1M 0.8 nozzle", + "sub_path": "process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json" + }, + { + "name": "0.10mm Standard @BBL A1M 0.2 nozzle", + "sub_path": "process/0.10mm Standard @BBL A1M 0.2 nozzle.json" + }, + { + "name": "0.40mm Standard @BBL A1M 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL A1M 0.8 nozzle.json" + }, + { + "name": "0.30mm Standard @BBL A1M 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL A1M 0.6 nozzle.json" + }, + { + "name": "0.20mm Standard @BBL A1M", + "sub_path": "process/0.20mm Standard @BBL A1M.json" + }, + { + "name": "0.20mm Strength @BBL A1M", + "sub_path": "process/0.20mm Strength @BBL A1M.json" } ], "filament_list": [ @@ -297,6 +397,14 @@ "name": "fdm_filament_hips", "sub_path": "filament/fdm_filament_hips.json" }, + { + "name": "fdm_filament_pps", + "sub_path": "filament/fdm_filament_pps.json" + }, + { + "name": "fdm_filament_ppa", + "sub_path": "filament/fdm_filament_ppa.json" + }, { "name": "Bambu PLA Matte @base", "sub_path": "filament/Bambu PLA Matte @base.json" @@ -369,6 +477,18 @@ "name": "Bambu PLA Aero @base", "sub_path": "filament/Bambu PLA Aero @base.json" }, + { + "name": "Overture PLA @base", + "sub_path": "filament/Overture PLA @base.json" + }, + { + "name": "Overture Matte PLA @base", + "sub_path": "filament/Overture Matte PLA @base.json" + }, + { + "name": "Generic PLA High Speed @base", + "sub_path": "filament/Generic PLA High Speed @base.json" + }, { "name": "Bambu TPU 95A @base", "sub_path": "filament/Bambu TPU 95A @base.json" @@ -401,6 +521,10 @@ "name": "Bambu PETG-CF @base", "sub_path": "filament/Bambu PETG-CF @base.json" }, + { + "name": "PolyLite PETG @base", + "sub_path": "filament/PolyLite PETG @base.json" + }, { "name": "Bambu ABS @base", "sub_path": "filament/Bambu ABS @base.json" @@ -409,6 +533,10 @@ "name": "Generic ABS @base", "sub_path": "filament/Generic ABS @base.json" }, + { + "name": "PolyLite ABS @base", + "sub_path": "filament/PolyLite ABS @base.json" + }, { "name": "Bambu PC @base", "sub_path": "filament/Bambu PC @base.json" @@ -425,6 +553,10 @@ "name": "Bambu ASA @base", "sub_path": "filament/Bambu ASA @base.json" }, + { + "name": "PolyLite ASA @base", + "sub_path": "filament/PolyLite ASA @base.json" + }, { "name": "Generic PVA @base", "sub_path": "filament/Generic PVA @base.json" @@ -461,10 +593,30 @@ "name": "Bambu Support For PA/PET @base", "sub_path": "filament/Bambu Support For PA PET @base.json" }, + { + "name": "Bambu PA6-CF @base", + "sub_path": "filament/Bambu PA6-CF @base.json" + }, { "name": "Generic HIPS @base", "sub_path": "filament/Generic HIPS @base.json" }, + { + "name": "Generic PPS-CF @base", + "sub_path": "filament/Generic PPS-CF @base.json" + }, + { + "name": "Generic PPS @base", + "sub_path": "filament/Generic PPS @base.json" + }, + { + "name": "Generic PPA-CF @base", + "sub_path": "filament/Generic PPA-CF @base.json" + }, + { + "name": "Generic PPA-GF @base", + "sub_path": "filament/Generic PPA-GF @base.json" + }, { "name": "Bambu PLA Matte @BBL X1C", "sub_path": "filament/Bambu PLA Matte @BBL X1C.json" @@ -489,6 +641,14 @@ "name": "Bambu PLA Matte @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P.json" }, + { + "name": "Bambu PLA Matte @BBL A1M", + "sub_path": "filament/Bambu PLA Matte @BBL A1M.json" + }, + { + "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu PLA Basic @BBL X1C", "sub_path": "filament/Bambu PLA Basic @BBL X1C.json" @@ -513,6 +673,14 @@ "name": "Bambu PLA Basic @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P.json" }, + { + "name": "Bambu PLA Basic @BBL A1M", + "sub_path": "filament/Bambu PLA Basic @BBL A1M.json" + }, + { + "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu PLA Tough @BBL X1C", "sub_path": "filament/Bambu PLA Tough @BBL X1C.json" @@ -533,6 +701,14 @@ "name": "Bambu PLA Tough @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P.json" }, + { + "name": "Bambu PLA Tough @BBL A1M", + "sub_path": "filament/Bambu PLA Tough @BBL A1M.json" + }, + { + "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu PLA Marble @BBL X1", "sub_path": "filament/Bambu PLA Marble @BBL X1.json" @@ -545,6 +721,10 @@ "name": "Bambu PLA Marble @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P.json" }, + { + "name": "Bambu PLA Marble @BBL A1M", + "sub_path": "filament/Bambu PLA Marble @BBL A1M.json" + }, { "name": "Bambu PLA Sparkle @BBL X1", "sub_path": "filament/Bambu PLA Sparkle @BBL X1.json" @@ -557,6 +737,10 @@ "name": "Bambu PLA Sparkle @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P.json" }, + { + "name": "Bambu PLA Sparkle @BBL A1M", + "sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json" + }, { "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json" @@ -577,6 +761,14 @@ "name": "Bambu PLA Metal @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P.json" }, + { + "name": "Bambu PLA Metal @BBL A1M", + "sub_path": "filament/Bambu PLA Metal @BBL A1M.json" + }, + { + "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu PLA Silk @BBL X1", "sub_path": "filament/Bambu PLA Silk @BBL X1.json" @@ -597,6 +789,14 @@ "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json" }, + { + "name": "Bambu PLA Silk @BBL A1M", + "sub_path": "filament/Bambu PLA Silk @BBL A1M.json" + }, + { + "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu Support W @BBL X1C", "sub_path": "filament/Bambu Support W @BBL X1C.json" @@ -617,6 +817,14 @@ "name": "Bambu Support W @BBL P1P", "sub_path": "filament/P1P/Bambu Support W @BBL P1P.json" }, + { + "name": "Bambu Support W @BBL A1M", + "sub_path": "filament/Bambu Support W @BBL A1M.json" + }, + { + "name": "Bambu Support W @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json" + }, { "name": "eSUN PLA+ @BBL X1C", "sub_path": "filament/eSUN PLA+ @BBL X1C.json" @@ -637,6 +845,14 @@ "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json" }, + { + "name": "eSUN PLA+ @BBL A1M", + "sub_path": "filament/eSUN PLA+ @BBL A1M.json" + }, + { + "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json" + }, { "name": "PolyTerra PLA @BBL X1C", "sub_path": "filament/PolyTerra PLA @BBL X1C.json" @@ -649,6 +865,14 @@ "name": "PolyTerra PLA @BBL P1P", "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P.json" }, + { + "name": "PolyTerra PLA @BBL A1M", + "sub_path": "filament/PolyTerra PLA @BBL A1M.json" + }, + { + "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json" + }, { "name": "PolyLite PLA @BBL X1C", "sub_path": "filament/PolyLite PLA @BBL X1C.json" @@ -661,6 +885,14 @@ "name": "PolyLite PLA @BBL P1P", "sub_path": "filament/P1P/PolyLite PLA @BBL P1P.json" }, + { + "name": "PolyLite PLA @BBL A1M", + "sub_path": "filament/PolyLite PLA @BBL A1M.json" + }, + { + "name": "PolyLite PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL A1M 0.2 nozzle.json" + }, { "name": "Generic PLA", "sub_path": "filament/Generic PLA.json" @@ -677,6 +909,14 @@ "name": "Generic PLA @BBL P1P", "sub_path": "filament/P1P/Generic PLA @BBL P1P.json" }, + { + "name": "Generic PLA @BBL A1M", + "sub_path": "filament/Generic PLA @BBL A1M.json" + }, + { + "name": "Generic PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json" + }, { "name": "Generic PLA Silk", "sub_path": "filament/Generic PLA Silk.json" @@ -685,6 +925,10 @@ "name": "Generic PLA Silk @BBL P1P", "sub_path": "filament/P1P/Generic PLA Silk @BBL P1P.json" }, + { + "name": "Generic PLA Silk @BBL A1M", + "sub_path": "filament/Generic PLA Silk @BBL A1M.json" + }, { "name": "Generic PLA-CF", "sub_path": "filament/Generic PLA-CF.json" @@ -693,6 +937,10 @@ "name": "Generic PLA-CF @BBL P1P", "sub_path": "filament/P1P/Generic PLA-CF @BBL P1P.json" }, + { + "name": "Generic PLA-CF @BBL A1M", + "sub_path": "filament/Generic PLA-CF @BBL A1M.json" + }, { "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json" @@ -709,6 +957,14 @@ "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json" }, + { + "name": "Bambu PLA-CF @BBL A1M", + "sub_path": "filament/Bambu PLA-CF @BBL A1M.json" + }, + { + "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json" + }, { "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", "sub_path": "filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json" @@ -725,6 +981,14 @@ "name": "Bambu Support For PLA @BBL P1P", "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P.json" }, + { + "name": "Bambu Support For PLA @BBL A1M", + "sub_path": "filament/Bambu Support For PLA @BBL A1M.json" + }, + { + "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu PLA Aero @BBL X1", "sub_path": "filament/Bambu PLA Aero @BBL X1.json" @@ -737,6 +1001,54 @@ "name": "Bambu PLA Aero @BBL P1P", "sub_path": "filament/P1P/Bambu PLA Aero @BBL P1P.json" }, + { + "name": "Bambu PLA Aero @BBL A1M", + "sub_path": "filament/Bambu PLA Aero @BBL A1M.json" + }, + { + "name": "Overture PLA @BBL X1C", + "sub_path": "filament/Overture PLA @BBL X1C.json" + }, + { + "name": "Overture PLA @BBL X1", + "sub_path": "filament/Overture PLA @BBL X1.json" + }, + { + "name": "Overture PLA @BBL P1P", + "sub_path": "filament/Overture PLA @BBL P1P.json" + }, + { + "name": "Overture PLA @BBL A1M", + "sub_path": "filament/Overture PLA @BBL A1M.json" + }, + { + "name": "Overture Matte PLA @BBL X1C", + "sub_path": "filament/Overture Matte PLA @BBL X1C.json" + }, + { + "name": "Overture Matte PLA @BBL X1", + "sub_path": "filament/Overture Matte PLA @BBL X1.json" + }, + { + "name": "Overture Matte PLA @BBL P1P", + "sub_path": "filament/Overture Matte PLA @BBL P1P.json" + }, + { + "name": "Overture Matte PLA @BBL A1M", + "sub_path": "filament/Overture Matte PLA @BBL A1M.json" + }, + { + "name": "Generic PLA High Speed @BBL X1C", + "sub_path": "filament/Generic PLA High Speed @BBL X1C.json" + }, + { + "name": "Generic PLA High Speed @BBL P1P", + "sub_path": "filament/Generic PLA High Speed @BBL P1P.json" + }, + { + "name": "Generic PLA High Speed @BBL A1M", + "sub_path": "filament/Generic PLA High Speed @BBL A1M.json" + }, { "name": "Bambu TPU 95A @BBL X1C", "sub_path": "filament/Bambu TPU 95A @BBL X1C.json" @@ -749,6 +1061,14 @@ "name": "Bambu TPU 95A @BBL P1P", "sub_path": "filament/P1P/Bambu TPU 95A @BBL P1P.json" }, + { + "name": "Bambu TPU 95A @BBL A1M", + "sub_path": "filament/Bambu TPU 95A @BBL A1M.json" + }, + { + "name": "Generic TPU @BBL A1M", + "sub_path": "filament/Generic TPU @BBL A1M.json" + }, { "name": "Bambu PETG Basic @BBL X1C", "sub_path": "filament/Bambu PETG Basic @BBL X1C.json" @@ -785,6 +1105,14 @@ "name": "Generic PETG @BBL P1P 0.2 nozzle", "sub_path": "filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json" }, + { + "name": "Generic PETG @BBL A1M", + "sub_path": "filament/Generic PETG @BBL A1M.json" + }, + { + "name": "Generic PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json" + }, { "name": "Generic PETG-CF @BBL X1C", "sub_path": "filament/Generic PETG-CF @BBL X1C.json" @@ -809,6 +1137,22 @@ "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json" }, + { + "name": "Bambu PETG-CF @BBL A1M", + "sub_path": "filament/Bambu PETG-CF @BBL A1M.json" + }, + { + "name": "PolyLite PETG @BBL X1C", + "sub_path": "filament/PolyLite PETG @BBL X1C.json" + }, + { + "name": "PolyLite PETG @BBL P1P", + "sub_path": "filament/PolyLite PETG @BBL P1P.json" + }, + { + "name": "PolyLite PETG @BBL A1M", + "sub_path": "filament/PolyLite PETG @BBL A1M.json" + }, { "name": "Bambu ABS @BBL X1C", "sub_path": "filament/Bambu ABS @BBL X1C.json" @@ -845,6 +1189,14 @@ "name": "Generic ABS @BBL P1P", "sub_path": "filament/P1P/Generic ABS @BBL P1P.json" }, + { + "name": "PolyLite ABS @BBL X1C", + "sub_path": "filament/PolyLite ABS @BBL X1C.json" + }, + { + "name": "PolyLite ABS @BBL P1P", + "sub_path": "filament/PolyLite ABS @BBL P1P.json" + }, { "name": "Bambu PC @BBL X1C", "sub_path": "filament/Bambu PC @BBL X1C.json" @@ -921,6 +1273,14 @@ "name": "Bambu ASA @BBL X1C 0.4 nozzle", "sub_path": "filament/Bambu ASA @BBL X1C 0.4 nozzle.json" }, + { + "name": "PolyLite ASA @BBL X1C", + "sub_path": "filament/PolyLite ASA @BBL X1C.json" + }, + { + "name": "PolyLite ASA @BBL P1P", + "sub_path": "filament/PolyLite ASA @BBL P1P.json" + }, { "name": "Generic PVA @0.2 nozzle", "sub_path": "filament/Generic PVA @0.2 nozzle.json" @@ -937,6 +1297,14 @@ "name": "Generic PVA @BBL P1P", "sub_path": "filament/P1P/Generic PVA @BBL P1P.json" }, + { + "name": "Generic PVA @BBL A1M", + "sub_path": "filament/Generic PVA @BBL A1M.json" + }, + { + "name": "Generic PVA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu Support G @BBL X1C", "sub_path": "filament/Bambu Support G @BBL X1C.json" @@ -953,6 +1321,10 @@ "name": "Bambu PA-CF @BBL P1P", "sub_path": "filament/P1P/Bambu PA-CF @BBL P1P.json" }, + { + "name": "Generic PA-CF @BBL X1E", + "sub_path": "filament/Generic PA-CF @BBL X1E.json" + }, { "name": "Bambu PAHT-CF @BBL X1C", "sub_path": "filament/Bambu PAHT-CF @BBL X1C.json" @@ -969,6 +1341,14 @@ "name": "Bambu Support For PA/PET @BBL X1C", "sub_path": "filament/Bambu Support For PA PET @BBL X1C.json" }, + { + "name": "Bambu PA6-CF @BBL X1C", + "sub_path": "filament/Bambu PA6-CF @BBL X1C.json" + }, + { + "name": "Bambu PA6-CF @BBL X1E", + "sub_path": "filament/Bambu PA6-CF @BBL X1E.json" + }, { "name": "Generic HIPS @BBL X1C", "sub_path": "filament/Generic HIPS @BBL X1C.json" @@ -977,6 +1357,38 @@ "name": "Generic HIPS @BBL X1C 0.2 nozzle", "sub_path": "filament/Generic HIPS @BBL X1C 0.2 nozzle.json" }, + { + "name": "Generic HIPS @BBL A1M", + "sub_path": "filament/Generic HIPS @BBL A1M.json" + }, + { + "name": "Generic HIPS @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PPS-CF @BBL X1E", + "sub_path": "filament/Generic PPS-CF @BBL X1E.json" + }, + { + "name": "Generic PPS @BBL X1E", + "sub_path": "filament/Generic PPS @BBL X1E.json" + }, + { + "name": "Generic PPA-CF @BBL X1E", + "sub_path": "filament/Generic PPA-CF @BBL X1E.json" + }, + { + "name": "Generic PPA-CF @BBL X1C", + "sub_path": "filament/Generic PPA-CF @BBL X1C.json" + }, + { + "name": "Generic PPA-GF @BBL X1C", + "sub_path": "filament/Generic PPA-GF @BBL X1C.json" + }, + { + "name": "Generic PPA-GF @BBL X1E", + "sub_path": "filament/Generic PPA-GF @BBL X1E.json" + }, { "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", "sub_path": "filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json" @@ -993,29 +1405,205 @@ "name": "PolyLite PLA @BBL P1P 0.2 nozzle", "sub_path": "filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json" }, + { + "name": "Overture PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Generic PETG-CF @BBL A1M", + "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json" + }, + { + "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json" + }, + { + "name": "Bambu PET-CF @BBL X1E", + "sub_path": "filament/Bambu PET-CF @BBL X1E.json" + }, + { + "name": "PolyLite PETG @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1E", + "sub_path": "filament/Bambu ABS @BBL X1E.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json" + }, + { + "name": "Generic ABS @BBL X1E", + "sub_path": "filament/Generic ABS @BBL X1E.json" + }, + { + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL X1E", + "sub_path": "filament/PolyLite ABS @BBL X1E.json" + }, + { + "name": "PolyLite ABS @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL P1P 0.2 nozzle.json" + }, { "name": "Bambu PC @BBL P1S", "sub_path": "filament/Bambu PC @BBL P1S.json" }, + { + "name": "Bambu PC @BBL X1E", + "sub_path": "filament/Bambu PC @BBL X1E.json" + }, { "name": "Bambu PC @BBL P1S 0.2 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.2 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json" + }, { "name": "Bambu PC @BBL P1S 0.8 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.8 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json" + }, { "name": "Bambu PC @BBL P1S 0.6 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.6 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json" + }, { "name": "Generic PC @BBL P1S 0.2 nozzle", "sub_path": "filament/Generic PC @BBL P1S 0.2 nozzle.json" }, + { + "name": "Generic PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL X1E 0.2 nozzle.json" + }, { "name": "Generic PC @BBL P1S", "sub_path": "filament/Generic PC @BBL P1S.json" + }, + { + "name": "Generic PC @BBL X1E", + "sub_path": "filament/Generic PC @BBL X1E.json" + }, + { + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL X1E", + "sub_path": "filament/Generic ASA @BBL X1E.json" + }, + { + "name": "Bambu ASA @BBL X1E", + "sub_path": "filament/Bambu ASA @BBL X1E.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1E", + "sub_path": "filament/PolyLite ASA @BBL X1E.json" + }, + { + "name": "PolyLite ASA @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Support G @BBL X1E", + "sub_path": "filament/Bambu Support G @BBL X1E.json" + }, + { + "name": "Bambu PA-CF @BBL X1E", + "sub_path": "filament/Bambu PA-CF @BBL X1E.json" + }, + { + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL X1E 0.2 nozzle.json" } ], "machine_list": [ @@ -1036,16 +1624,20 @@ "sub_path": "machine/Bambu Lab X1 0.4 nozzle.json" }, { - "name": "Bambu Lab X1 0.2 nozzle", - "sub_path": "machine/Bambu Lab X1 0.2 nozzle.json" + "name": "Bambu Lab P1P 0.4 nozzle", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle.json" }, { - "name": "Bambu Lab X1 0.8 nozzle", - "sub_path": "machine/Bambu Lab X1 0.8 nozzle.json" + "name": "Bambu Lab P1S 0.4 nozzle", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json" }, { - "name": "Bambu Lab X1 0.6 nozzle", - "sub_path": "machine/Bambu Lab X1 0.6 nozzle.json" + "name": "Bambu Lab A1 mini 0.4 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle.json" }, { "name": "Bambu Lab X1 Carbon 0.2 nozzle", @@ -1060,8 +1652,16 @@ "sub_path": "machine/Bambu Lab X1 Carbon 0.8 nozzle.json" }, { - "name": "Bambu Lab P1P 0.4 nozzle", - "sub_path": "machine/Bambu Lab P1P 0.4 nozzle.json" + "name": "Bambu Lab X1 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1 0.6 nozzle.json" }, { "name": "Bambu Lab P1P 0.2 nozzle", @@ -1075,10 +1675,6 @@ "name": "Bambu Lab P1P 0.8 nozzle", "sub_path": "machine/Bambu Lab P1P 0.8 nozzle.json" }, - { - "name": "Bambu Lab P1S 0.4 nozzle", - "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json" - }, { "name": "Bambu Lab P1S 0.2 nozzle", "sub_path": "machine/Bambu Lab P1S 0.2 nozzle.json" @@ -1090,6 +1686,30 @@ { "name": "Bambu Lab P1S 0.8 nozzle", "sub_path": "machine/Bambu Lab P1S 0.8 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.2 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.2 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.6 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.6 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.8 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.8 nozzle.json" } ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/Bambu LAb A1 mini_cover.png b/resources/profiles/BBL/Bambu LAb A1 mini_cover.png new file mode 100644 index 0000000000..f224e40b89 Binary files /dev/null and b/resources/profiles/BBL/Bambu LAb A1 mini_cover.png differ diff --git a/resources/profiles/BBL/Bambu Lab X1E_cover.png b/resources/profiles/BBL/Bambu Lab X1E_cover.png new file mode 100644 index 0000000000..1daaf9c3a9 Binary files /dev/null and b/resources/profiles/BBL/Bambu Lab X1E_cover.png differ diff --git a/resources/profiles/BBL/bbl-3dp-A1M.stl b/resources/profiles/BBL/bbl-3dp-A1M.stl new file mode 100644 index 0000000000..ccdc7982e0 Binary files /dev/null and b/resources/profiles/BBL/bbl-3dp-A1M.stl differ diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json index 9ab4f1513f..3949e18511 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB00_00", "name": "Bambu ABS @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json index 371647908f..70613a34f2 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB00_01", "name": "Bambu ABS @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json index f28bb2a425..3fb2c7f621 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB00", "name": "Bambu ABS @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..97c7af9a10 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "inherits": "Bambu ABS @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB00_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json new file mode 100644 index 0000000000..6f5d353ded --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "inherits": "Bambu ABS @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSB00_06", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json new file mode 100644 index 0000000000..e281fa4032 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E", + "inherits": "Bambu ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB00_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json index 0117852594..a185e7cf80 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFB00", "name": "Bambu ABS @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB00", + "instantiation": "false", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json index d54ae3a6ef..abaa62c35e 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json @@ -1,10 +1,10 @@ { - "name": "Bambu ASA @BBL X1 0.2 nozzle", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu ASA @BBL X1 0.2 nozzle", "inherits": "Bambu ASA @base", + "from": "system", "setting_id": "GFSB01_03", + "instantiation": "true", "fan_max_speed": [ "80" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json index 208bd79d16..e98e02789d 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json @@ -1,10 +1,10 @@ { - "name": "Bambu ASA @BBL X1 0.6 nozzle", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu ASA @BBL X1 0.6 nozzle", "inherits": "Bambu ASA @base", + "from": "system", "setting_id": "GFSB01_04", + "instantiation": "true", "fan_max_speed": [ "90" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json index aea32b4ccb..1253bff71f 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json @@ -1,16 +1,16 @@ { - "name": "Bambu ASA @BBL X1C 0.2 nozzle", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu ASA @BBL X1C 0.2 nozzle", "inherits": "Bambu ASA @base", + "from": "system", "setting_id": "GFSB01_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json index e5be657ca2..b3c53e095c 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json @@ -1,15 +1,18 @@ { - "name": "Bambu ASA @BBL X1C 0.4 nozzle", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu ASA @BBL X1C 0.4 nozzle", "inherits": "Bambu ASA @base", + "from": "system", "setting_id": "GFSB01_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1P 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json index 8fc456b2e7..5693a2c1d0 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json @@ -1,10 +1,10 @@ { - "name": "Bambu ASA @BBL X1C", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu ASA @BBL X1C", "inherits": "Bambu ASA @base", + "from": "system", "setting_id": "GFSB01_00", + "instantiation": "true", "fan_min_speed": [ "25" ], @@ -16,6 +16,7 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..a2a1ee66dd --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "inherits": "Bambu ASA @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB01_06", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json new file mode 100644 index 0000000000..795272b92d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "inherits": "Bambu ASA @BBL X1C 0.4 nozzle", + "from": "system", + "setting_id": "GFSB01_07", + "instantiation": "true", + "chamber_temperatures": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json new file mode 100644 index 0000000000..9d15dcb1c2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E", + "inherits": "Bambu ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB01_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json index f3c174af5e..f2fc943a0d 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA @base.json @@ -1,16 +1,16 @@ { - "name": "Bambu ASA @base", "type": "filament", - "instantiation": "false", - "from": "system", + "name": "Bambu ASA @base", "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB01", + "instantiation": "false", "filament_density": [ "1.05" ], "filament_cost": [ "31.99" ], - "filament_id": "GFB01", "nozzle_temperature_initial_layer": [ "270" ], diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json index 5738020708..1ee5a243ae 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSN00", "name": "Bambu PA-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN00", + "instantiation": "true", "nozzle_temperature_initial_layer": [ "290" ], diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json new file mode 100644 index 0000000000..56aecc4f50 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PA-CF @BBL X1E", + "inherits": "Bambu PA-CF @BBL X1C", + "from": "system", + "setting_id": "GFSN03_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json index 7d34ca5072..2788ee1bdc 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "GFN03", "name": "Bambu PA-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pa", - "filament_vendor": [ - "Bambu Lab" + "from": "system", + "filament_id": "GFN03", + "instantiation": "false", + "filament_cost": [ + "84.99" ], "filament_density": [ "1.09" @@ -14,22 +14,25 @@ "filament_flow_ratio": [ "0.96" ], - "nozzle_temperature_initial_layer": [ + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ "280" ], - "overhang_fan_threshold": [ - "0%" + "nozzle_temperature_initial_layer": [ + "280" ], "overhang_fan_speed": [ "40" ], - "filament_type": [ - "PA-CF" + "overhang_fan_threshold": [ + "0%" ], - "filament_cost": [ - "84.99" - ], - "nozzle_temperature": [ - "280" + "temperature_vitrification": [ + "170" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json new file mode 100644 index 0000000000..3d81a495a1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL X1C", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json new file mode 100644 index 0000000000..98cd1f7621 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL X1E", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json new file mode 100644 index 0000000000..697101fff8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN05", + "instantiation": "false", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_density": [ + "1.10" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json index b34635bb37..8e02c61fdb 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSN04", "name": "Bambu PAHT-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04", + "instantiation": "true", "chamber_temperatures": [ "60" ], @@ -17,6 +17,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json index 67182ecc5c..0f5dcfb745 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFN04", "name": "Bambu PAHT-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN04", + "instantiation": "false", "fan_max_speed": [ "30" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json index b7efca74c9..4190eb1836 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_06", "name": "Bambu PC @BBL P1S 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSC00_06", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json index e90462b303..67bb02d3fa 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_08", "name": "Bambu PC @BBL P1S 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @BBL X1C 0.6 nozzle", + "from": "system", + "setting_id": "GFSC00_08", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json index a7724f8624..144a5cae30 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_07", "name": "Bambu PC @BBL P1S 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSC00_07", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json index 41bfa2346f..ea192bfba3 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_05", "name": "Bambu PC @BBL P1S", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @BBL X1C", + "from": "system", + "setting_id": "GFSC00_05", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json index 6afdd4352b..31d13f48e8 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_02", "name": "Bambu PC @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_02", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json index 360b0465b9..3b5399efa2 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_01", "name": "Bambu PC @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_01", + "instantiation": "true", "nozzle_temperature": [ "260" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json index f067ceab0a..b1cc742c2c 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_00", "name": "Bambu PC @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_00", + "instantiation": "true", "nozzle_temperature": [ "260" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json index 047a71fe82..7ee2131465 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00", "name": "Bambu PC @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..a89ee103c4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "inherits": "Bambu PC @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSC00_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json new file mode 100644 index 0000000000..3464603199 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "inherits": "Bambu PC @BBL X1C 0.6 nozzle", + "from": "system", + "setting_id": "GFSC00_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json new file mode 100644 index 0000000000..1930bde03d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "inherits": "Bambu PC @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSC00_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json new file mode 100644 index 0000000000..75cdf76d8e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E", + "inherits": "Bambu PC @BBL X1C", + "from": "system", + "setting_id": "GFSC00_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @base.json b/resources/profiles/BBL/filament/Bambu PC @base.json index a9038a4b92..001f7c94d7 100644 --- a/resources/profiles/BBL/filament/Bambu PC @base.json +++ b/resources/profiles/BBL/filament/Bambu PC @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFC00", "name": "Bambu PC @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "GFC00", + "instantiation": "false", "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json index 3550e947ce..09f2147d66 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFST01", "name": "Bambu PET-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01", + "instantiation": "true", "reduce_fan_stop_start_freq": [ "0" ], diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json new file mode 100644 index 0000000000..44be4cef2c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PET-CF @BBL X1E", + "inherits": "Bambu PET-CF @BBL X1C", + "from": "system", + "setting_id": "GFST01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json index a5aa8cc47d..9cfc605c32 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json @@ -1,18 +1,24 @@ { "type": "filament", - "filament_id": "GFT01", "name": "Bambu PET-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pet", - "temperature_vitrification": [ - "185" + "from": "system", + "filament_id": "GFT01", + "instantiation": "false", + "cool_plate_temp": [ + "0" ], - "overhang_fan_threshold": [ - "0%" + "cool_plate_temp_initial_layer": [ + "0" ], - "overhang_fan_speed": [ - "40" + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "5" ], "fan_max_speed": [ "30" @@ -20,67 +26,61 @@ "fan_min_speed": [ "10" ], - "filament_max_volumetric_speed": [ - "8" - ], - "slow_down_layer_time": [ - "2" - ], - "fan_cooling_layer_time": [ - "5" - ], - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "hot_plate_temp": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "required_nozzle_HRC": [ - "40" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PET-CF" - ], "filament_cost": [ "84.99" ], "filament_density": [ "1.29" ], - "nozzle_temperature_range_low": [ - "260" + "filament_max_volumetric_speed": [ + "8" ], - "nozzle_temperature_range_high": [ - "290" + "filament_type": [ + "PET-CF" ], - "nozzle_temperature_initial_layer": [ - "270" + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" ], "nozzle_temperature": [ "270" ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "temperature_vitrification": [ + "185" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..6553473d1b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", + "inherits": "Bambu PETG Basic @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSG00_04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json new file mode 100644 index 0000000000..837e060fe5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", + "inherits": "Bambu PETG Basic @BBL X1C", + "from": "system", + "setting_id": "GFSG00_03", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..e3d66863c0 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", + "inherits": "Bambu PETG Basic @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSG00_05", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json index 2e0ad795e7..c7dd9923cd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG00_00", "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], @@ -12,6 +12,7 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json index ec0647529a..0a24cb5a1a 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json @@ -1,19 +1,19 @@ { "type": "filament", - "setting_id": "GFSG00_02", "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG Basic @base", - "filament_max_volumetric_speed": [ - "16" - ], + "from": "system", + "setting_id": "GFSG00_02", + "instantiation": "true", "fan_max_speed": [ "60" ], "fan_min_speed": [ "20" ], + "filament_max_volumetric_speed": [ + "16" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", @@ -22,6 +22,8 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json index 0c1b16bf99..d68745bb17 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG00_01", "name": "Bambu PETG Basic @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], @@ -12,6 +12,7 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json index 4c0ccd83dc..02ca4846f8 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json @@ -1,18 +1,24 @@ { "type": "filament", - "filament_id": "GFG00", "name": "Bambu PETG Basic @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" + "from": "system", + "filament_id": "GFG00", + "instantiation": "false", + "cool_plate_temp": [ + "0" ], - "overhang_fan_speed": [ - "90" + "cool_plate_temp_initial_layer": [ + "0" ], - "overhang_fan_threshold": [ - "10%" + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" ], "fan_max_speed": [ "40" @@ -20,52 +26,46 @@ "fan_min_speed": [ "10" ], - "filament_max_volumetric_speed": [ - "8" - ], - "fan_cooling_layer_time": [ - "30" - ], - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "hot_plate_temp": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_vendor": [ - "Bambu Lab" - ], "filament_cost": [ "24.99" ], "filament_density": [ "1.25" ], - "nozzle_temperature_range_low": [ - "240" + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" ], "nozzle_temperature_range_high": [ "270" ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json new file mode 100644 index 0000000000..4545a6f2a9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", + "inherits": "Bambu PETG-CF @BBL A1M", + "from": "system", + "setting_id": "GFSG50_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json new file mode 100644 index 0000000000..a630c42d3c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL A1M", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json index 0680c68034..807069d44b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSG50_02", "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_02", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json index c4e20d66fb..bbfe1b42e2 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json @@ -1,16 +1,18 @@ { "type": "filament", - "setting_id": "GFSG50_01", "name": "Bambu PETG-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_01", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json index f0627b0f0e..5263e70059 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json @@ -1,80 +1,80 @@ { "type": "filament", - "filament_id": "GFG50", "name": "Bambu PETG-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" - ], - "temperature_vitrification": [ - "75" - ], - "overhang_fan_threshold": [ - "10%" - ], - "overhang_fan_speed": [ - "90" - ], + "from": "system", + "filament_id": "GFG50", + "instantiation": "false", "cool_plate_temp": [ "0" ], + "cool_plate_temp_initial_layer": [ + "0" + ], "eng_plate_temp": [ "70" ], - "hot_plate_temp": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], "eng_plate_temp_initial_layer": [ "70" ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "required_nozzle_HRC": [ - "40" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PETG-CF" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], "fan_max_speed": [ "30" ], "fan_min_speed": [ "0" ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], "filament_max_volumetric_speed": [ "14" ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], "slow_down_layer_time": [ "6" ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json new file mode 100644 index 0000000000..6483f04f4c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Bambu PLA Aero @BBL A1M", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json index 3d27f686a8..d614051813 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json @@ -1,10 +1,13 @@ { - "name": "Bambu PLA Aero @BBL X1", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu PLA Aero @BBL X1", "inherits": "Bambu PLA Aero @base", + "from": "system", "setting_id": "GFSA11_00", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json index 559801ab58..f3160585a6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json @@ -1,12 +1,15 @@ { - "name": "Bambu PLA Aero @BBL X1C", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu PLA Aero @BBL X1C", "inherits": "Bambu PLA Aero @base", + "from": "system", "setting_id": "GFSA11_01", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], "slow_down_layer_time": [ - "4" + "8" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", @@ -14,6 +17,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json index b5787ea311..95b26c2796 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json @@ -1,15 +1,12 @@ { "type": "filament", "name": "Bambu PLA Aero @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", + "from": "system", "filament_id": "GFA11", - "filament_type":[ - "PLA-AERO" - ], - "filament_flow_ratio": [ - "0.6" + "instantiation": "false", + "fan_min_speed": [ + "30" ], "filament_cost": [ "44.99" @@ -17,16 +14,25 @@ "filament_density": [ "1.21" ], + "filament_flow_ratio": [ + "0.6" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PLA-AERO" + ], "filament_vendor": [ "Bambu Lab" ], - "nozzle_temperature_range_low": [ - "210" - ], "nozzle_temperature_range_high": [ "260" ], + "nozzle_temperature_range_low": [ + "210" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..c1a12b1c4a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json new file mode 100644 index 0000000000..85c54ef7d6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL A1M", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json index 45684a3ffa..3a70c808a4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA04", "name": "Bambu PLA Basic @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json index b35a11bd97..ddaeb7a616 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSA00_00", "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json index aabdb191ab..d8d8307fc0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json @@ -1,15 +1,16 @@ { "type": "filament", - "setting_id": "GFSA00_01", "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json index e83ef7154b..2cb005d6f5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA00", "name": "Bambu PLA Basic @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], @@ -12,6 +12,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json index ded3eb4ebf..b975be47dc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json @@ -1,23 +1,26 @@ { "type": "filament", - "filament_id": "GFA00", "name": "Bambu PLA Basic @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], + "from": "system", + "filament_id": "GFA00", + "instantiation": "false", "filament_cost": [ "24.99" ], - "filament_flow_ratio": [ - "0.98" - ], "filament_density": [ "1.26" ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json index cf7f860a53..7cdc6f3e42 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFA03", "name": "Bambu PLA Impact @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA03", + "instantiation": "false", "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json new file mode 100644 index 0000000000..92dfae7b7e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Bambu PLA Marble @BBL A1M", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json index 795f60b2a4..20b0a0969e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA07_01", "name": "Bambu PLA Marble @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_01", + "instantiation": "true", "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json index 4fe362318d..4199fd943d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json @@ -1,16 +1,19 @@ { "type": "filament", - "setting_id": "GFSA07_00", "name": "Bambu PLA Marble @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_00", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json index 47df386956..be77e77870 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json @@ -1,13 +1,10 @@ { "type": "filament", - "filament_id": "GFA07", "name": "Bambu PLA Marble @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], + "from": "system", + "filament_id": "GFA07", + "instantiation": "false", "filament_cost": [ "29.99" ], @@ -17,7 +14,10 @@ "filament_flow_ratio": [ "0.98" ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..d637a5e270 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json new file mode 100644 index 0000000000..c08d84529d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL A1M", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json index e180056e6d..7721eacbc8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA05", "name": "Bambu PLA Matte @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA05", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json index cd0ab92066..824e96a5e3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSA01_00", "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json index f3039c5953..7e2d1f4fc9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json @@ -1,15 +1,16 @@ { "type": "filament", - "setting_id": "GFSA01_01", "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json index e4e70dd51b..a7e1e76634 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA01", "name": "Bambu PLA Matte @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], @@ -12,6 +12,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json index 16e468681c..a9a337c6a4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFA01", "name": "Bambu PLA Matte @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA01", + "instantiation": "false", "filament_vendor": [ "Bambu Lab" ], @@ -18,6 +18,6 @@ "0.98" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..b486490b0d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json new file mode 100644 index 0000000000..9b58508d54 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @BBL A1M", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json index 389813b431..c481b66c0a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA02_02", "name": "Bambu PLA Metal @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_02", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json index c722caa9f3..7ed6ab8f3e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSA02_01", "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json index 145ba4e68b..91995ef069 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA02", "name": "Bambu PLA Metal @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json index da916316e5..77c81e4fb0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json @@ -1,23 +1,23 @@ { "type": "filament", - "filament_id": "GFA02", "name": "Bambu PLA Metal @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], + "from": "system", + "filament_id": "GFA02", + "instantiation": "false", "filament_cost": [ "29.99" ], - "filament_flow_ratio": [ - "0.98" - ], "filament_density": [ "1.25" ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..19caa9c9e6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json new file mode 100644 index 0000000000..e85cca345a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk @BBL A1M", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json index 388cea4614..0c0c43cb7c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA05_02", "name": "Bambu PLA Silk @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_02", + "instantiation": "true", "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json index a071d3a8ba..85c560fcdb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSA05_00", "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json index 9ee3c8a914..5d75934310 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json @@ -1,16 +1,19 @@ { "type": "filament", - "setting_id": "GFSA05_01", "name": "Bambu PLA Silk @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_01", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json index a64a0c7280..642f939610 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json @@ -1,29 +1,29 @@ { "type": "filament", - "filament_id": "GFA05", "name": "Bambu PLA Silk @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], - "filament_flow_ratio": [ - "0.98" + "from": "system", + "filament_id": "GFA05", + "instantiation": "false", + "filament_cost": [ + "29.99" ], "filament_density": [ "1.32" ], - "filament_cost": [ - "29.99" + "filament_flow_ratio": [ + "0.98" ], - "nozzle_temperature_initial_layer": [ - "230" + "filament_vendor": [ + "Bambu Lab" ], "nozzle_temperature": [ "230" ], + "nozzle_temperature_initial_layer": [ + "230" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json new file mode 100644 index 0000000000..d585542697 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A1M", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json index 5a03b0bb69..7e9b618e38 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA08_01", "name": "Bambu PLA Sparkle @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_01", + "instantiation": "true", "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json index b60657eab0..fdc02d06c5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json @@ -1,16 +1,19 @@ { "type": "filament", - "setting_id": "GFSA08_00", "name": "Bambu PLA Sparkle @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_00", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json index 15f3acc7fe..cd4ee94fd6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json @@ -1,13 +1,10 @@ { "type": "filament", - "filament_id": "GFA08", "name": "Bambu PLA Sparkle @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], + "from": "system", + "filament_id": "GFA08", + "instantiation": "false", "filament_cost": [ "29.99" ], @@ -17,7 +14,10 @@ "filament_flow_ratio": [ "0.98" ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..4f10cb0ed5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json new file mode 100644 index 0000000000..40b03fb52b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough @BBL A1M", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json index 4ba18df635..afab239c47 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA09_01", "name": "Bambu PLA Tough @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json index c1d88bc3d2..eb6f63a2f3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSA09_00", "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json index b203df44e8..418cc8f9ca 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA09_02", "name": "Bambu PLA Tough @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_02", + "instantiation": "true", "filament_max_volumetric_speed": [ "21" ], @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json index 764386ed45..24168d6f13 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json @@ -1,23 +1,23 @@ { "type": "filament", - "filament_id": "GFA09", "name": "Bambu PLA Tough @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], + "from": "system", + "filament_id": "GFA09", + "instantiation": "false", "filament_cost": [ "28.99" ], - "filament_flow_ratio": [ - "0.98" - ], "filament_density": [ "1.26" ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..9e6df67b92 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json new file mode 100644 index 0000000000..8994c7d43c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL A1M", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json index fc805fd436..3b5c25a41f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json @@ -1,17 +1,17 @@ { "type": "filament", - "setting_id": "GFSA50_02", "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_02", + "instantiation": "true", "filament_max_volumetric_speed": [ "18" ], - "nozzle_temperature_initial_layer": [ + "nozzle_temperature": [ "230" ], - "nozzle_temperature": [ + "nozzle_temperature_initial_layer": [ "230" ], "compatible_printers": [ @@ -20,6 +20,8 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json index 0906ad366e..c917e0745a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json @@ -1,22 +1,23 @@ { "type": "filament", - "setting_id": "GFSA50_01", "name": "Bambu PLA-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "15" ], - "nozzle_temperature_initial_layer": [ + "nozzle_temperature": [ "230" ], - "nozzle_temperature": [ + "nozzle_temperature_initial_layer": [ "230" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json index 763e2d0703..3f356ae865 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "GFA50", "name": "Bambu PLA-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" + "from": "system", + "filament_id": "GFA50", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" ], "cool_plate_temp": [ "45" @@ -17,11 +17,23 @@ "filament_cost": [ "34.99" ], + "filament_density": [ + "1.22" + ], "filament_flow_ratio": [ "0.98" ], - "filament_density": [ - "1.22" + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" ], "required_nozzle_HRC": [ "40" @@ -29,19 +41,7 @@ "slow_down_layer_time": [ "8" ], - "nozzle_temperature_range_low": [ - "210" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json index de71a028ee..bcf6a2ad8f 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS03_00", "name": "Bambu Support For PA/PET @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_00", + "instantiation": "true", "chamber_temperatures": [ "60" ], @@ -17,6 +17,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json index 1c41f14c7f..7af6db4c14 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFS03", "name": "Bambu Support For PA/PET @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFS03", + "instantiation": "false", "required_nozzle_HRC": [ "3" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..f02e4de3c2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json new file mode 100644 index 0000000000..4a73ea4aca --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL A1M", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json index b42141a9f8..cf064eb4de 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json @@ -1,22 +1,23 @@ { "type": "filament", - "setting_id": "GFSS02_01", "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "0.5" ], - "nozzle_temperature_initial_layer": [ + "nozzle_temperature": [ "240" ], - "nozzle_temperature": [ + "nozzle_temperature_initial_layer": [ "240" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json index f110bf6135..d136f6380d 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS02_02", "name": "Bambu Support For PLA @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_02", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json index e014c00138..75179145e6 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json @@ -1,19 +1,10 @@ { "type": "filament", - "filament_id": "GFS02", "name": "Bambu Support For PLA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], - "filament_density": [ - "1.30" - ], - "filament_is_support": [ - "1" - ], + "from": "system", + "filament_id": "GFS02", + "instantiation": "false", "cool_plate_temp": [ "40" ], @@ -23,10 +14,19 @@ "filament_cost": [ "69.98" ], + "filament_density": [ + "1.30" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], "slow_down_layer_time": [ "8" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json index 4d194ca020..b0847af241 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS01", "name": "Bambu Support G @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json new file mode 100644 index 0000000000..043f8661f7 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu Support G @BBL X1E", + "inherits": "Bambu Support G @BBL X1C", + "from": "system", + "setting_id": "GFSS01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json index bbc35bf607..1d72fe9580 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @base.json +++ b/resources/profiles/BBL/filament/Bambu Support G @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFS01", "name": "Bambu Support G @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFS01", + "instantiation": "false", "required_nozzle_HRC": [ "3" ], diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..96c226d8e0 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Bambu Support W @BBL A1M 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json new file mode 100644 index 0000000000..51efafdccf --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "name": "Bambu Support W @BBL A1M", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json index b631fe80c0..3d00718f7e 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json @@ -1,13 +1,13 @@ { "type": "filament", - "setting_id": "GFSS02", "name": "Bambu Support W @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS02", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json index c300fa8104..1b18733d10 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json @@ -1,22 +1,23 @@ { "type": "filament", - "setting_id": "GFSS00_00", "name": "Bambu Support W @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "0.5" ], - "nozzle_temperature_initial_layer": [ + "nozzle_temperature": [ "240" ], - "nozzle_temperature": [ + "nozzle_temperature_initial_layer": [ "240" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json index eb93ea64c0..206d74ec83 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json @@ -1,16 +1,19 @@ { "type": "filament", - "setting_id": "GFSS00", "name": "Bambu Support W @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json index e6efbd3c45..63f7acebc8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @base.json +++ b/resources/profiles/BBL/filament/Bambu Support W @base.json @@ -1,19 +1,10 @@ { "type": "filament", - "filament_id": "GFS00", "name": "Bambu Support W @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Bambu Lab" - ], - "filament_density": [ - "1.30" - ], - "filament_is_support": [ - "1" - ], + "from": "system", + "filament_id": "GFS00", + "instantiation": "false", "cool_plate_temp": [ "40" ], @@ -23,10 +14,19 @@ "filament_cost": [ "69.98" ], + "filament_density": [ + "1.30" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], "slow_down_layer_time": [ "8" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json new file mode 100644 index 0000000000..eefb04f274 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A @BBL A1M", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6" + ], + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json index 709e94f9bd..2625946528 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSU01", "name": "Bambu TPU 95A @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01", + "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" ], @@ -13,4 +13,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json index 5aff786ba0..0916bf63a5 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSU00", "name": "Bambu TPU 95A @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU00", + "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" ], @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json index 507386fb56..bc1e839340 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFU01", "name": "Bambu TPU 95A @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "GFU01", + "instantiation": "false", "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json index f63befa67e..ea692b1849 100644 --- a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB99_00", "name": "Generic ABS @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..217ee39225 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "inherits": "Generic ABS @0.2 nozzle", + "from": "system", + "setting_id": "GFSB99_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json new file mode 100644 index 0000000000..f8755a9f65 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic ABS @BBL X1E", + "inherits": "Generic ABS", + "from": "system", + "setting_id": "GFSB99_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json index 044703f6a9..e41b289fbc 100644 --- a/resources/profiles/BBL/filament/Generic ABS @base.json +++ b/resources/profiles/BBL/filament/Generic ABS @base.json @@ -1,14 +1,14 @@ { "type": "filament", - "filament_id": "GFB99", "name": "Generic ABS @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB99", + "instantiation": "false", "filament_flow_ratio": [ "0.95" ], "filament_max_volumetric_speed": [ "16" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS.json b/resources/profiles/BBL/filament/Generic ABS.json index b21d0a3f63..bd7c0959c6 100644 --- a/resources/profiles/BBL/filament/Generic ABS.json +++ b/resources/profiles/BBL/filament/Generic ABS.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB99", "name": "Generic ABS", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json index 0f614f4885..7e26d7bb66 100644 --- a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB98_00", "name": "Generic ASA @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..758d7aa64b --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "inherits": "Generic ASA @0.2 nozzle", + "from": "system", + "setting_id": "GFSB98_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json new file mode 100644 index 0000000000..c93c41ffb7 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic ASA @BBL X1E", + "inherits": "Generic ASA", + "from": "system", + "setting_id": "GFSB98_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json index 10ed891833..9f80b36f12 100644 --- a/resources/profiles/BBL/filament/Generic ASA @base.json +++ b/resources/profiles/BBL/filament/Generic ASA @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFB98", "name": "Generic ASA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB98", + "instantiation": "false", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Generic ASA.json b/resources/profiles/BBL/filament/Generic ASA.json index e2e68058f7..7e56eb37af 100644 --- a/resources/profiles/BBL/filament/Generic ASA.json +++ b/resources/profiles/BBL/filament/Generic ASA.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB98", "name": "Generic ASA", - "from": "system", - "instantiation": "true", "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..a2200be03c --- /dev/null +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Generic HIPS @BBL A1M 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_03", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json new file mode 100644 index 0000000000..11c1000c23 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic HIPS @BBL A1M", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_02", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json index 7a2636be4e..f4f53fb2d3 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json @@ -1,17 +1,18 @@ { - "type": "filament", - "setting_id": "GFSS98_01", - "name": "Generic HIPS @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "Generic HIPS @base", - "filament_max_volumetric_speed": [ - "0.5" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] + "type": "filament", + "name": "Generic HIPS @BBL X1C 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "0.5" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json index b77b75727a..9890712738 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json @@ -1,22 +1,25 @@ { - "type": "filament", - "setting_id": "GFSS98_00", - "name": "Generic HIPS @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "Generic HIPS @base", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] + "type": "filament", + "name": "Generic HIPS @BBL X1C", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @base.json b/resources/profiles/BBL/filament/Generic HIPS @base.json index 030daa118d..9ffe6a8598 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @base.json +++ b/resources/profiles/BBL/filament/Generic HIPS @base.json @@ -1,14 +1,11 @@ { - "type": "filament", - "filament_id": "GFS98", - "name": "Generic HIPS @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_hips", - "filament_vendor": [ - "Generic" - ], - "filament_is_support": [ - "1" - ] + "type": "filament", + "name": "Generic HIPS @base", + "inherits": "fdm_filament_hips", + "from": "system", + "filament_id": "GFS98", + "instantiation": "false", + "filament_is_support": [ + "1" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json new file mode 100644 index 0000000000..6c2b48142f --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PA-CF @BBL X1E", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json index bebf3edb69..5ce9881f82 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF.json +++ b/resources/profiles/BBL/filament/Generic PA-CF.json @@ -1,13 +1,13 @@ { "type": "filament", + "name": "Generic PA-CF", + "inherits": "fdm_filament_pa", + "from": "system", "filament_id": "GFN98", "setting_id": "GFSN99", - "name": "Generic PA-CF", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pa", - "filament_type": [ - "PA-CF" + "fan_cooling_layer_time": [ + "5" ], "fan_max_speed": [ "30" @@ -15,17 +15,20 @@ "fan_min_speed": [ "10" ], - "overhang_fan_threshold": [ - "0%" + "filament_type": [ + "PA-CF" + ], + "full_fan_speed_layer": [ + "2" ], "overhang_fan_speed": [ "40" ], - "fan_cooling_layer_time": [ - "5" + "overhang_fan_threshold": [ + "0%" ], - "full_fan_speed_layer": [ - "2" + "temperature_vitrification": [ + "170" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json index cdd6c8774d..ac30ee5409 100644 --- a/resources/profiles/BBL/filament/Generic PA.json +++ b/resources/profiles/BBL/filament/Generic PA.json @@ -1,14 +1,11 @@ { "type": "filament", + "name": "Generic PA", + "inherits": "fdm_filament_pa", + "from": "system", "filament_id": "GFN99", "setting_id": "GFSN98", - "name": "Generic PA", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pa", - "required_nozzle_HRC": [ - "3" - ], "chamber_temperatures": [ "60" ], @@ -21,11 +18,8 @@ "nozzle_temperature_initial_layer": [ "280" ], - "nozzle_temperature": [ - "280" - ], - "filament_max_volumetric_speed": [ - "16" + "required_nozzle_HRC": [ + "3" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", @@ -36,6 +30,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json index 1563dd5c8a..2aaddc1d97 100644 --- a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99_00", "name": "Generic PC @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json index e4abf728d2..43ba9a9c6b 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99_03", "name": "Generic PC @BBL P1S 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_03", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json index b50a8a32aa..a384d080e8 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99_04", "name": "Generic PC @BBL P1S", - "from": "system", - "instantiation": "true", "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_04", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..ed8ebb495e --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PC @BBL X1E 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json new file mode 100644 index 0000000000..9d8c61a978 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PC @BBL X1E", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json index b51b608898..6c56650baf 100644 --- a/resources/profiles/BBL/filament/Generic PC @base.json +++ b/resources/profiles/BBL/filament/Generic PC @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFC99", "name": "Generic PC @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "GFC99", + "instantiation": "false", "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/BBL/filament/Generic PC.json b/resources/profiles/BBL/filament/Generic PC.json index 156ee20981..6e8cbc2c6e 100644 --- a/resources/profiles/BBL/filament/Generic PC.json +++ b/resources/profiles/BBL/filament/Generic PC.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99", "name": "Generic PC", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", @@ -13,4 +13,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json index 124f0a32f6..0c415d9844 100644 --- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSG99_01", "name": "Generic PETG @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..7abc1a0652 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PETG @BBL A1M 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json new file mode 100644 index 0000000000..83ce33ee7b --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PETG @BBL A1M", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @base.json b/resources/profiles/BBL/filament/Generic PETG @base.json index 2308488ea8..6e25c129fc 100644 --- a/resources/profiles/BBL/filament/Generic PETG @base.json +++ b/resources/profiles/BBL/filament/Generic PETG @base.json @@ -1,51 +1,54 @@ { "type": "filament", - "filament_id": "GFG99", "name": "Generic PETG @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG99", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], "fan_cooling_layer_time": [ "30" ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], "fan_max_speed": [ "90" ], "fan_min_speed": [ "40" ], - "slow_down_min_speed": [ - "20" - ], "filament_flow_ratio": [ "0.95" ], "filament_max_volumetric_speed": [ "12" ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], "nozzle_temperature_range_high": [ "270" ], - "cool_plate_temp": [ - "0" + "overhang_fan_speed": [ + "90" ], - "eng_plate_temp": [ - "70" + "overhang_fan_threshold": [ + "10%" ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "hot_plate_temp": [ - "70" + "slow_down_min_speed": [ + "20" ], "textured_plate_temp": [ "70" @@ -53,10 +56,7 @@ "textured_plate_temp_initial_layer": [ "70" ], - "hot_plate_temp_initial_layer": [ - "70" - ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json index 85cc9c8b22..c21a0b8934 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG50", "name": "Generic PETG-CF @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG50", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index c4c96b813b..c794c3566c 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -1,80 +1,80 @@ { "type": "filament", - "filament_id": "GFG98", "name": "Generic PETG-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pet", - "filament_flow_ratio": [ - "0.95" - ], - "temperature_vitrification": [ - "75" - ], - "overhang_fan_threshold": [ - "10%" - ], - "overhang_fan_speed": [ - "90" - ], + "from": "system", + "filament_id": "GFG98", + "instantiation": "false", "cool_plate_temp": [ "0" ], + "cool_plate_temp_initial_layer": [ + "0" + ], "eng_plate_temp": [ "70" ], - "hot_plate_temp": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], "eng_plate_temp_initial_layer": [ "70" ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "required_nozzle_HRC": [ - "40" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_type": [ - "PETG-CF" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], "fan_max_speed": [ "30" ], "fan_min_speed": [ "0" ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], "filament_max_volumetric_speed": [ "12" ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], "slow_down_layer_time": [ "6" ], - "filament_start_gcode":[ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json index ca84198d62..4052484a56 100644 --- a/resources/profiles/BBL/filament/Generic PETG.json +++ b/resources/profiles/BBL/filament/Generic PETG.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG99", "name": "Generic PETG", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json index 8c37572bc1..d80a580773 100644 --- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json @@ -1,19 +1,20 @@ { "type": "filament", - "setting_id": "GFSL99_00", "name": "Generic PLA @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" - ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..79d1f2150b --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Generic PLA @BBL A1M 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json new file mode 100644 index 0000000000..84bbaa9e13 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "name": "Generic PLA @BBL A1M", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json index 43e3ff2f6a..904cef4dae 100644 --- a/resources/profiles/BBL/filament/Generic PLA @base.json +++ b/resources/profiles/BBL/filament/Generic PLA @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFL99", "name": "Generic PLA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL99", + "instantiation": "false", "filament_flow_ratio": [ "0.98" ], @@ -12,6 +12,6 @@ "8" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..b043e52658 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL A1M", + "from": "system", + "setting_id": "GFSL95_07", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json new file mode 100644 index 0000000000..0697473589 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL A1M", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..a96bb26134 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL P1P", + "from": "system", + "setting_id": "GFSL95_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json new file mode 100644 index 0000000000..a1750a1a16 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL P1P", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..51a76c165a --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL X1C", + "from": "system", + "setting_id": "GFSL95_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json new file mode 100644 index 0000000000..f2e682804f --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL X1C", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_00", + "instantiation": "true", + "slow_down_layer_time": [ + "4" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @base.json b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json new file mode 100644 index 0000000000..e3672f689e --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL95", + "instantiation": "false", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json new file mode 100644 index 0000000000..ba7582a9e1 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @BBL A1M", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json index 456b9a6fad..60ac1d46fa 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFL96", "name": "Generic PLA Silk @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL96", + "instantiation": "false", "filament_flow_ratio": [ "0.98" ], @@ -12,6 +12,6 @@ "8" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json index ce9698f67f..c1011d708b 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL99_01", "name": "Generic PLA Silk", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL99_01", + "instantiation": "true", "filament_max_volumetric_speed": [ "7.5" ], @@ -20,6 +20,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json new file mode 100644 index 0000000000..b8438ffee5 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @BBL A1M", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json index 1055ec9902..597bdd6e23 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "GFL98", "name": "Generic PLA-CF @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "required_nozzle_HRC": [ - "40" + "from": "system", + "filament_id": "GFL98", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" ], "cool_plate_temp": [ "45" @@ -20,13 +20,13 @@ "filament_type": [ "PLA-CF" ], + "required_nozzle_HRC": [ + "40" + ], "slow_down_layer_time": [ "7" ], - "additional_cooling_fan_speed": [ - "0" - ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json index 39f5a6a48b..b4e3affc2c 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL98", "name": "Generic PLA-CF", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json index e4579f39cc..70ccc0d984 100644 --- a/resources/profiles/BBL/filament/Generic PLA.json +++ b/resources/profiles/BBL/filament/Generic PLA.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL99", "name": "Generic PLA", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", @@ -14,9 +14,12 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json new file mode 100644 index 0000000000..2df7f15255 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "Generic PPA-CF @BBL X1C", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_00", + "instantiation": "true", + "filament_type": [ + "PPA-CF" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json new file mode 100644 index 0000000000..b032627561 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Generic PPA-CF @BBL X1E", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_type": [ + "PPA-CF" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json new file mode 100644 index 0000000000..1e642929b2 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "GFN97", + "instantiation": "false", + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPA-CF" + ], + "filament_vendor": [ + "Generic" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json new file mode 100644 index 0000000000..39cd2763d9 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PPA-GF @BBL X1C", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PPA-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json new file mode 100644 index 0000000000..fec89c9804 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "Generic PPA-GF @BBL X1E", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PPA-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @base.json b/resources/profiles/BBL/filament/Generic PPA-GF @base.json new file mode 100644 index 0000000000..2d95e3f5c0 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-GF @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PPA-GF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "GFN96", + "instantiation": "false", + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPA-GF" + ], + "filament_vendor": [ + "Generic" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json new file mode 100644 index 0000000000..9afaeeb5ea --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PPS @BBL X1E", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @base.json b/resources/profiles/BBL/filament/Generic PPS @base.json new file mode 100644 index 0000000000..7fa708bae6 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS @base.json @@ -0,0 +1,8 @@ +{ + "type": "filament", + "name": "Generic PPS @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "GFT97", + "instantiation": "false" +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json new file mode 100644 index 0000000000..929ccff925 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PPS-CF @BBL X1E", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json new file mode 100644 index 0000000000..887d276e2d --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Generic PPS-CF @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "GFT98", + "instantiation": "false", + "fan_max_speed": [ + "30" + ], + "filament_density": [ + "1.3" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_type": [ + "PPS-CF" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "required_nozzle_HRC": [ + "40" + ], + "temperature_vitrification": [ + "220" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json index 596ddaf913..6df4727ea0 100644 --- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSS99_00", "name": "Generic PVA @0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_00", + "instantiation": "true", "filament_max_volumetric_speed": [ "0.5" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..d57e6fd726 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Generic PVA @BBL A1M 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json new file mode 100644 index 0000000000..fa3e915260 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Generic PVA @BBL A1M", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json index e472d0284c..c29671ea3c 100644 --- a/resources/profiles/BBL/filament/Generic PVA @base.json +++ b/resources/profiles/BBL/filament/Generic PVA @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "GFS99", "name": "Generic PVA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pva", + "from": "system", + "filament_id": "GFS99", + "instantiation": "false", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json index 4bd23ee2b2..7db3aac32b 100644 --- a/resources/profiles/BBL/filament/Generic PVA.json +++ b/resources/profiles/BBL/filament/Generic PVA.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS99", "name": "Generic PVA", - "from": "system", - "instantiation": "true", "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json new file mode 100644 index 0000000000..d5caa5640a --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "name": "Generic TPU @BBL A1M", + "inherits": "Generic TPU", + "from": "system", + "setting_id": "GFSU99_00", + "instantiation": "true", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json index f956343ae0..273e917570 100644 --- a/resources/profiles/BBL/filament/Generic TPU.json +++ b/resources/profiles/BBL/filament/Generic TPU.json @@ -1,17 +1,14 @@ { "type": "filament", + "name": "Generic TPU", + "inherits": "fdm_filament_tpu", + "from": "system", "filament_id": "GFU99", "setting_id": "GFSR99", - "name": "Generic TPU", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_tpu", "filament_max_volumetric_speed": [ "3.2" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" - ], "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.6 nozzle", @@ -21,6 +18,12 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..dd372d83b2 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL A1M", + "from": "system", + "setting_id": "GFSL05_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json new file mode 100644 index 0000000000..0e6e727a3f --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1M", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..8b51a32b04 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL P1P", + "from": "system", + "setting_id": "GFSL05_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json new file mode 100644 index 0000000000..634f7ef0a9 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL P1P", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json new file mode 100644 index 0000000000..cedb6ba843 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_02", + "instantiation": "true", + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..4ffd147c38 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL05_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json new file mode 100644 index 0000000000..7d5a7ecd57 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1C", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @base.json b/resources/profiles/BBL/filament/Overture Matte PLA @base.json new file mode 100644 index 0000000000..b4e2e3748f --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL05", + "instantiation": "false", + "filament_cost": [ + "24.52" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..5a705c4a01 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1M 0.2 nozzle", + "inherits": "Overture PLA @BBL A1M", + "from": "system", + "setting_id": "GFSL04_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json new file mode 100644 index 0000000000..851864ce0e --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1M", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..f8de6aa199 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL P1P 0.2 nozzle", + "inherits": "Overture PLA @BBL P1P", + "from": "system", + "setting_id": "GFSL04_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json new file mode 100644 index 0000000000..d1d0e4af73 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL P1P", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json new file mode 100644 index 0000000000..c36384a9e7 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_01", + "instantiation": "true", + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..80f5acd18e --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1C 0.2 nozzle", + "inherits": "Overture PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL04_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json new file mode 100644 index 0000000000..15c06a2ca6 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1C", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @base.json b/resources/profiles/BBL/filament/Overture PLA @base.json new file mode 100644 index 0000000000..7a4ce113b1 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL04", + "instantiation": "false", + "filament_cost": [ + "24.15" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json index a12c39b56c..e703e3d6a6 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "GFSB00_02", "name": "Bambu ABS @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_02", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], "filament_max_volumetric_speed": [ "2" ], @@ -14,18 +17,15 @@ "hot_plate_temp_initial_layer": [ "100" ], + "reduce_fan_stop_start_freq": [ + "0" + ], "textured_plate_temp": [ "100" ], "textured_plate_temp_initial_layer": [ "100" ], - "fan_max_speed": [ - "20" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json index 5b4be18b33..40a0a0a260 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json @@ -1,18 +1,15 @@ { "type": "filament", - "setting_id": "GFSB00_03", "name": "Bambu ABS @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS @base", - "filament_max_volumetric_speed": [ - "22" - ], + "from": "system", + "setting_id": "GFSB00_03", + "instantiation": "true", "fan_max_speed": [ "20" ], - "reduce_fan_stop_start_freq": [ - "0" + "filament_max_volumetric_speed": [ + "22" ], "hot_plate_temp": [ "100" @@ -20,6 +17,9 @@ "hot_plate_temp_initial_layer": [ "100" ], + "reduce_fan_stop_start_freq": [ + "0" + ], "textured_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json index 13ceed98d4..8a29f7a0db 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json @@ -1,15 +1,12 @@ { "type": "filament", - "setting_id": "GFSN00_10", "name": "Bambu PA-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PA-CF @base", - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature": [ - "290" + "from": "system", + "setting_id": "GFSN00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "5" ], "fan_max_speed": [ "30" @@ -17,12 +14,15 @@ "fan_min_speed": [ "10" ], - "fan_cooling_layer_time": [ - "5" - ], "full_fan_speed_layer": [ "2" ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json index bc2295d4b6..705d143274 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSN04_10", "name": "Bambu PAHT-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_10", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json index 39d4674257..b4bcf75507 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_03", "name": "Bambu PC @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_03", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json index e35afa31e8..a34eef36af 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC00_04", "name": "Bambu PC @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_04", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json index 068922bf6b..9edc5c0844 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFST01_10", "name": "Bambu PET-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_10", + "instantiation": "true", "reduce_fan_stop_start_freq": [ "0" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json index 8c6d5bc317..4904cf0b10 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG50_03", "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_03", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json index cb51c8c907..fe4edb3f3d 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG50_11", "name": "Bambu PETG-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_11", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json index 5b6c1d2f8c..12b0b187cf 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json @@ -1,31 +1,31 @@ { - "name": "Bambu PLA Aero @BBL P1P", "type": "filament", - "instantiation": "true", - "from": "system", + "name": "Bambu PLA Aero @BBL P1P", "inherits": "Bambu PLA Aero @base", + "from": "system", "setting_id": "GFSA11_02", - "hot_plate_temp_initial_layer": [ - "65" - ], - "hot_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "fan_min_speed": [ - "50" + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" ], "fan_cooling_layer_time": [ "80" ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], "slow_down_layer_time": [ "8" ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json index 488581d21f..815cca5839 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA00_10", "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "2" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json index 1b61b991b0..d64ab7e7d1 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSA04_10", "name": "Bambu PLA Basic @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA04_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "21" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json index 5abcc629e2..01a5fab4a1 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json @@ -1,31 +1,31 @@ { "type": "filament", - "setting_id": "GFSA07_10", "name": "Bambu PLA Marble @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "slow_down_layer_time": [ - "8" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json index f4f918dac7..469caee5cd 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA01_10", "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "2" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json index 095d4ebd97..fcfc07fd19 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSA05_10", "name": "Bambu PLA Matte @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA05_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "22" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json index 86655f6942..e15633097b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA02_11", "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "2" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json index 1f4adeaf76..a0dca2a898 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSA02_10", "name": "Bambu PLA Metal @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "21" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json index 981cf85905..09a0b7a53b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSA05_11", "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_11", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json index a0fb732d5e..81eed74e3d 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json @@ -1,19 +1,19 @@ { "type": "filament", - "setting_id": "GFSA05_12", "name": "Bambu PLA Silk @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Silk @base", - "slow_down_layer_time": [ - "8" - ], + "from": "system", + "setting_id": "GFSA05_12", + "instantiation": "true", "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json index b8b884ae2e..437b010e73 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json @@ -1,31 +1,31 @@ { "type": "filament", - "setting_id": "GFSA08_10", "name": "Bambu PLA Sparkle @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "slow_down_layer_time": [ - "8" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json index 885a4aaeff..b1d1351f6d 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA09_10", "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "2" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json index 210a049069..f756aef514 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSA09_11", "name": "Bambu PLA Tough @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "21" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json index 686af8659c..500dacbbf3 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA50_11", "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "18" ], @@ -14,24 +20,18 @@ "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "nozzle_temperature": [ "230" ], "nozzle_temperature_initial_layer": [ "230" ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], "compatible_printers": [ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json index 9a67e3e639..640bb4af9a 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSA50_10", "name": "Bambu PLA-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "15" ], @@ -14,24 +20,18 @@ "hot_plate_temp_initial_layer": [ "65" ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "nozzle_temperature": [ "230" ], "nozzle_temperature_initial_layer": [ "230" ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json index 63a8fd739e..394b924a0c 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS03_01", "name": "Bambu Support For PA/PET @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_01", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json index dfcea17db9..c8eacd22f8 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json @@ -1,37 +1,37 @@ { "type": "filament", - "setting_id": "GFSS02_11", "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "0.5" ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature": [ - "240" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json index f8ca06c6e6..cbe201a3a3 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSS02_12", "name": "Bambu Support For PLA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_12", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "hot_plate_temp": [ "65" ], @@ -17,12 +23,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json index aeed825b3a..318bcd86d1 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS01_10", "name": "Bambu Support G @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_10", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json index 19c2eccd0f..0b1994f67c 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json @@ -1,37 +1,37 @@ { "type": "filament", - "setting_id": "GFSS00_10", "name": "Bambu Support W @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "0.5" ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature": [ - "240" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json index a3e191bcf1..4463bcd325 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSS02_10", "name": "Bambu Support W @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS02_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "hot_plate_temp": [ "65" ], @@ -17,12 +23,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json index cda492b5da..5c980a1e6b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSU01_10", "name": "Bambu TPU 95A @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_10", + "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" ], @@ -23,6 +23,9 @@ "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json index 0f8174fafd..2315e5da8a 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json @@ -1,18 +1,15 @@ { "type": "filament", - "setting_id": "GFSB99_02", "name": "Generic ABS @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @base", - "filament_max_volumetric_speed": [ - "2" - ], + "from": "system", + "setting_id": "GFSB99_02", + "instantiation": "true", "fan_max_speed": [ "20" ], - "reduce_fan_stop_start_freq": [ - "0" + "filament_max_volumetric_speed": [ + "2" ], "hot_plate_temp": [ "100" @@ -20,6 +17,9 @@ "hot_plate_temp_initial_layer": [ "100" ], + "reduce_fan_stop_start_freq": [ + "0" + ], "textured_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json index 24b48a38f7..3b46c650d1 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json @@ -1,22 +1,22 @@ { "type": "filament", - "setting_id": "GFSB99_01", "name": "Generic ABS @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_01", + "instantiation": "true", "fan_max_speed": [ "20" ], - "reduce_fan_stop_start_freq": [ - "0" - ], "hot_plate_temp": [ "100" ], "hot_plate_temp_initial_layer": [ "100" ], + "reduce_fan_stop_start_freq": [ + "0" + ], "textured_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json index 2226507caf..50bf7bebbe 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB98_11", "name": "Generic ASA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_11", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json index 5797ed01e2..000cddfd36 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSB98_10", "name": "Generic ASA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_10", + "instantiation": "true", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json index 9b2754cc66..696ea395e1 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json @@ -1,22 +1,22 @@ { "type": "filament", + "name": "Generic PA @BBL P1P", + "inherits": "fdm_filament_pa", + "from": "system", "filament_id": "GFN99", "setting_id": "GFSN98_10", - "name": "Generic PA @BBL P1P", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pa", - "required_nozzle_HRC": [ - "3" - ], - "nozzle_temperature_initial_layer": [ - "280" + "filament_max_volumetric_speed": [ + "16" ], "nozzle_temperature": [ "280" ], - "filament_max_volumetric_speed": [ - "16" + "nozzle_temperature_initial_layer": [ + "280" + ], + "required_nozzle_HRC": [ + "3" ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json index 6970fa4bf1..1e17c278ce 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json @@ -1,13 +1,13 @@ { "type": "filament", + "name": "Generic PA-CF @BBL P1P", + "inherits": "fdm_filament_pa", + "from": "system", "filament_id": "GFN98", "setting_id": "GFSN99_10", - "name": "Generic PA-CF @BBL P1P", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pa", - "filament_type": [ - "PA-CF" + "fan_cooling_layer_time": [ + "5" ], "fan_max_speed": [ "30" @@ -15,17 +15,17 @@ "fan_min_speed": [ "10" ], - "overhang_fan_threshold": [ - "0%" + "filament_type": [ + "PA-CF" + ], + "full_fan_speed_layer": [ + "2" ], "overhang_fan_speed": [ "40" ], - "fan_cooling_layer_time": [ - "5" - ], - "full_fan_speed_layer": [ - "2" + "overhang_fan_threshold": [ + "0%" ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json index 74af74bfd7..9a08a5b75b 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99_01", "name": "Generic PC @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_01", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json index 0ffa7b73b3..e49796daee 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSC99_02", "name": "Generic PC @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_02", + "instantiation": "true", "eng_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json index f1ffc06718..317c0d0ac6 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "GFSG99_11", "name": "Generic PETG @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_11", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], "hot_plate_temp": [ "80" ], @@ -17,9 +20,6 @@ "textured_plate_temp_initial_layer": [ "80" ], - "filament_max_volumetric_speed": [ - "1" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json index 020f98de97..c50407cac3 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG99_10", "name": "Generic PETG @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_10", + "instantiation": "true", "hot_plate_temp": [ "80" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json new file mode 100644 index 0000000000..927e839529 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @BBL A1M", + "inherits": "Generic PETG-CF @BBL P1P", + "from": "system", + "setting_id": "GFSG98_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json index e5ff5b8e87..bf4c3ae6d8 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSG50_10", "name": "Generic PETG-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_10", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json index 2d801bd309..7e5aa202ae 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json @@ -1,16 +1,19 @@ { "type": "filament", - "setting_id": "GFSL99_11", "name": "Generic PLA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "2" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" - ], "hot_plate_temp": [ "65" ], @@ -23,13 +26,10 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json index e94b51e711..9315248c4c 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSL99_10", "name": "Generic PLA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "hot_plate_temp": [ "65" ], @@ -17,12 +23,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json index bf471473cb..3be9850301 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL99_12", "name": "Generic PLA Silk @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL99_12", + "instantiation": "true", "filament_max_volumetric_speed": [ "7.5" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json index 920616976f..6cfee5a5e1 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL98_10", "name": "Generic PLA-CF @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_10", + "instantiation": "true", "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json index 430fc457fb..b8635c757a 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSS99_11", "name": "Generic PVA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_11", + "instantiation": "true", "filament_max_volumetric_speed": [ "0.5" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json index d0a5b8642b..b7b0ea7808 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json @@ -1,15 +1,15 @@ { "type": "filament", - "setting_id": "GFSS99_10", "name": "Generic PVA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "Generic PVA @base", - "textured_plate_temp": [ - "65" + "from": "system", + "setting_id": "GFSS99_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" ], - "textured_plate_temp_initial_layer": [ - "65" + "fan_min_speed": [ + "50" ], "hot_plate_temp": [ "65" @@ -17,11 +17,11 @@ "hot_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" + "textured_plate_temp": [ + "65" ], - "fan_cooling_layer_time": [ - "80" + "textured_plate_temp_initial_layer": [ + "65" ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json index 9771d54828..effdb2d7f3 100644 --- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json @@ -1,17 +1,14 @@ { "type": "filament", + "name": "Generic TPU @BBL P1P", + "inherits": "fdm_filament_tpu", + "from": "system", "filament_id": "GFU99", "setting_id": "GFSR99_10", - "name": "Generic TPU @BBL P1P", - "from": "system", "instantiation": "true", - "inherits": "fdm_filament_tpu", "filament_max_volumetric_speed": [ "3.2" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" - ], "hot_plate_temp": [ "45" ], @@ -28,5 +25,8 @@ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json index 2da0dd181f..70619f5284 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSL25_10", "name": "PolyLite PLA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL25_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "1" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json index df33c39ffe..8430df5296 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSL23_10", "name": "PolyLite PLA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL23_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "15" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json index 0be3c67559..789062def6 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json @@ -1,10 +1,16 @@ { "type": "filament", - "setting_id": "GFSL24_10", "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyTerra PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL24_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "1" ], @@ -20,12 +26,6 @@ "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json index fec170b4d4..7504020d8f 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json @@ -1,34 +1,34 @@ { "type": "filament", - "setting_id": "GFSL22_10", "name": "PolyTerra PLA @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL22_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], "filament_max_volumetric_speed": [ "22" ], - "slow_down_layer_time": [ - "8" - ], "hot_plate_temp": [ "65" ], "hot_plate_temp_initial_layer": [ "65" ], + "slow_down_layer_time": [ + "8" + ], "textured_plate_temp": [ "65" ], "textured_plate_temp_initial_layer": [ "65" ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json index bc15748305..154a347fd1 100644 --- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "filament", - "setting_id": "GFSL03_10", - "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "eSUN PLA+ @base", - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] + "type": "filament", + "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json index e20c67074c..a2523d3f54 100644 --- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json @@ -1,34 +1,34 @@ { - "type": "filament", - "setting_id": "GFSL03_11", - "name": "eSUN PLA+ @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "eSUN PLA+ @base", - "slow_down_layer_time": [ - "10" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] + "type": "filament", + "name": "eSUN PLA+ @BBL P1P", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..82d325cab1 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL P1P 0.2 nozzle", + "inherits": "PolyLite ABS @BBL P1P", + "from": "system", + "setting_id": "GFSB60_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json new file mode 100644 index 0000000000..264eaa67cd --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL P1P", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_04", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..fe96accbfb --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1C 0.2 nozzle", + "inherits": "PolyLite ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB60_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json new file mode 100644 index 0000000000..c3738bc335 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1C", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..ceb5d54a40 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ABS @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB60_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json new file mode 100644 index 0000000000..ae174b951f --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E", + "inherits": "PolyLite ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB60_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @base.json b/resources/profiles/BBL/filament/PolyLite ABS @base.json new file mode 100644 index 0000000000..e722c94f04 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "PolyLite ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB60", + "instantiation": "false", + "filament_cost": [ + "26.9" + ], + "filament_density": [ + "1.03" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..a40ce53727 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL P1P 0.2 nozzle", + "inherits": "PolyLite ASA @BBL P1P", + "from": "system", + "setting_id": "GFSB61_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json new file mode 100644 index 0000000000..2b00174b2f --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL P1P", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_04", + "instantiation": "true", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..16bc0ad8e7 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1C 0.2 nozzle", + "inherits": "PolyLite ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB61_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json new file mode 100644 index 0000000000..3380230fd9 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1C", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..7c9c00acac --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ASA @BBL X1E", + "from": "system", + "setting_id": "GFSB61_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json new file mode 100644 index 0000000000..2d259d6dc1 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E", + "inherits": "PolyLite ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB61_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @base.json b/resources/profiles/BBL/filament/PolyLite ASA @base.json new file mode 100644 index 0000000000..169e38c125 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "PolyLite ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB61", + "instantiation": "false", + "filament_cost": [ + "23.6" + ], + "filament_density": [ + "1.02" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..a7cc88d94e --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1M 0.2 nozzle", + "inherits": "PolyLite PETG @BBL A1M", + "from": "system", + "setting_id": "GFSG60_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json new file mode 100644 index 0000000000..81ade454bf --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1M", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..a8a418a64e --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL P1P 0.2 nozzle", + "inherits": "PolyLite PETG @BBL P1P", + "from": "system", + "setting_id": "GFSG60_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json new file mode 100644 index 0000000000..9d3d627736 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL P1P", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..5bf2589627 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL X1C 0.2 nozzle", + "inherits": "PolyLite PETG @BBL X1C", + "from": "system", + "setting_id": "GFSG60_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json new file mode 100644 index 0000000000..829f11eec3 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL X1C", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @base.json b/resources/profiles/BBL/filament/PolyLite PETG @base.json new file mode 100644 index 0000000000..60c9451a57 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "PolyLite PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG60", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..ff991970c2 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1M 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json new file mode 100644 index 0000000000..a07bb0110d --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1M", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json index 6b5561966c..4ed5821921 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL23", "name": "PolyLite PLA @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL23", + "instantiation": "true", "filament_max_volumetric_speed": [ "15" ], @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json index f8ec37a8e5..e8a4157228 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSL25", "name": "PolyLite PLA @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL25", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json index 8f039164ae..c9c27d9143 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL19", "name": "PolyLite PLA @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL19", + "instantiation": "true", "filament_max_volumetric_speed": [ "15" ], @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @base.json b/resources/profiles/BBL/filament/PolyLite PLA @base.json index f8914467ea..1e7f4d16b7 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @base.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @base.json @@ -1,17 +1,17 @@ { "type": "filament", - "filament_id": "GFL00", "name": "PolyLite PLA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Polymaker" - ], + "from": "system", + "filament_id": "GFL00", + "instantiation": "false", "filament_cost": [ "25.4" ], "filament_flow_ratio": [ "0.95" + ], + "filament_vendor": [ + "Polymaker" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..73d3ce1a89 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json new file mode 100644 index 0000000000..288e5e938b --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1M", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json index 19b82baf49..d3fd2251c3 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL22", "name": "PolyTerra PLA @BBL X1", - "from": "system", - "instantiation": "true", "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL22", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], @@ -16,4 +16,4 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json index 82e80205e8..ed5b54fb10 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { "type": "filament", - "setting_id": "GFSL24", "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyTerra PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL24", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json index cf3a62a561..c3444436a2 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "GFSL18", "name": "PolyTerra PLA @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL18", + "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/PolyTerra PLA @base.json index 16a29aa51d..2deb2d9141 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @base.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @base.json @@ -1,13 +1,10 @@ { "type": "filament", - "filament_id": "GFL01", "name": "PolyTerra PLA @base", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_pla", - "filament_vendor": [ - "Polymaker" - ], + "from": "system", + "filament_id": "GFL01", + "instantiation": "false", "filament_cost": [ "25.4" ], @@ -16,5 +13,8 @@ ], "filament_flow_ratio": [ "0.98" + ], + "filament_vendor": [ + "Polymaker" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..96573934d6 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json new file mode 100644 index 0000000000..92a72de8f0 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1M", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json index 392b133fdc..fca65e947d 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json @@ -1,16 +1,16 @@ { - "type": "filament", - "setting_id": "GFSL03_02", - "name": "eSUN PLA+ @BBL X1", - "from": "system", - "instantiation": "true", - "inherits": "eSUN PLA+ @base", - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] + "type": "filament", + "name": "eSUN PLA+ @BBL X1", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_02", + "instantiation": "true", + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json index 5e0826b74e..b05b011f21 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json @@ -1,16 +1,17 @@ { - "type": "filament", - "setting_id": "GFSL03_01", - "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "eSUN PLA+ @base", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] + "type": "filament", + "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json index 8b37f3fc6c..551e467844 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json @@ -1,16 +1,19 @@ { - "type": "filament", - "setting_id": "GFSL03_00", - "name": "eSUN PLA+ @BBL X1C", - "from": "system", - "instantiation": "true", - "inherits": "eSUN PLA+ @base", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] + "type": "filament", + "name": "eSUN PLA+ @BBL X1C", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @base.json b/resources/profiles/BBL/filament/eSUN PLA+ @base.json index 160bd7fb4c..6219d24562 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @base.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "filament_id": "GFL03", - "name": "eSUN PLA+ @base", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_pla", - "filament_vendor": [ - "eSUN" - ], - "filament_cost": [ - "22.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "slow_down_layer_time": [ - "6" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" - ] + "type": "filament", + "name": "eSUN PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL03", + "instantiation": "false", + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "eSUN" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json index 16497a718d..461dd5e610 100644 --- a/resources/profiles/BBL/filament/fdm_filament_abs.json +++ b/resources/profiles/BBL/filament/fdm_filament_abs.json @@ -1,88 +1,82 @@ { "type": "filament", "name": "fdm_filament_abs", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", - "cool_plate_temp" : [ - "0" - ], - "eng_plate_temp" : [ - "90" - ], - "hot_plate_temp" : [ - "90" - ], - "textured_plate_temp" : [ - "90" - ], - "cool_plate_temp_initial_layer" : [ - "0" - ], - "eng_plate_temp_initial_layer" : [ - "90" - ], - "hot_plate_temp_initial_layer" : [ - "90" - ], - "textured_plate_temp_initial_layer" : [ - "90" - ], - "slow_down_for_layer_cooling": [ + "activate_air_filtration": [ "1" ], - "close_fan_the_first_x_layers": [ - "3" + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" ], "fan_cooling_layer_time": [ "30" ], - "filament_max_volumetric_speed": [ - "28.6" - ], - "filament_type": [ - "ABS" - ], - "filament_density": [ - "1.04" - ], - "filament_cost": [ - "20" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], "fan_max_speed": [ "80" ], "fan_min_speed": [ "10" ], - "overhang_fan_threshold": [ - "25%" + "filament_cost": [ + "20" ], - "overhang_fan_speed": [ - "80" + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ABS" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" ], "nozzle_temperature": [ "270" ], - "temperature_vitrification": [ - "100" - ], - "nozzle_temperature_range_low": [ - "240" + "nozzle_temperature_initial_layer": [ + "260" ], "nozzle_temperature_range_high": [ "280" ], - "slow_down_min_speed": [ - "20" + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" ], "slow_down_layer_time": [ "3" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json index 1828f96883..ac7a9294c1 100644 --- a/resources/profiles/BBL/filament/fdm_filament_asa.json +++ b/resources/profiles/BBL/filament/fdm_filament_asa.json @@ -1,79 +1,82 @@ { "type": "filament", "name": "fdm_filament_asa", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", + "activate_air_filtration": [ + "1" + ], "cool_plate_temp": [ "0" ], + "cool_plate_temp_initial_layer": [ + "0" + ], "eng_plate_temp": [ "90" ], - "hot_plate_temp": [ - "90" - ], - "textured_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], "eng_plate_temp_initial_layer": [ "90" ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], "fan_cooling_layer_time": [ "35" ], - "filament_max_volumetric_speed": [ - "28.6" - ], - "filament_type": [ - "ASA" - ], - "filament_density": [ - "1.04" - ], - "filament_cost": [ - "20" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], "fan_max_speed": [ "80" ], "fan_min_speed": [ "10" ], - "overhang_fan_threshold": [ - "25%" + "filament_cost": [ + "20" ], - "overhang_fan_speed": [ - "80" + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ASA" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" ], "nozzle_temperature": [ "260" ], - "nozzle_temperature_range_low": [ - "240" + "nozzle_temperature_initial_layer": [ + "260" ], "nozzle_temperature_range_high": [ "280" ], - "slow_down_min_speed": [ - "20" + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" ], "slow_down_layer_time": [ "3" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json index 8ea752f4d6..6f1291c6ec 100644 --- a/resources/profiles/BBL/filament/fdm_filament_common.json +++ b/resources/profiles/BBL/filament/fdm_filament_common.json @@ -3,60 +3,42 @@ "name": "fdm_filament_common", "from": "system", "instantiation": "false", - "filament_is_support": [ + "activate_air_filtration": [ "0" ], - "required_nozzle_HRC": [ + "chamber_temperatures": [ + "0" + ], + "close_fan_the_first_x_layers": [ "3" ], + "complete_print_exhaust_fan_speed": [ + "70" + ], "cool_plate_temp": [ "60" ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], "cool_plate_temp_initial_layer": [ "60" ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "60" + ], "eng_plate_temp_initial_layer": [ "60" ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \nM106 P3 S0\n" - ], - "filament_flow_ratio": [ - "1" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], "fan_cooling_layer_time": [ "60" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "35" + ], "filament_cost": [ "0" ], @@ -69,16 +51,22 @@ "filament_diameter": [ "1.75" ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], "filament_max_volumetric_speed": [ "0" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], - "filament_retraction_minimum_travel": [ + "filament_retract_before_wipe": [ "nil" ], - "filament_retract_before_wipe": [ + "filament_retract_restart_extra": [ "nil" ], "filament_retract_when_changing_layer": [ @@ -87,13 +75,7 @@ "filament_retraction_length": [ "nil" ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "filament_retract_restart_extra": [ + "filament_retraction_minimum_travel": [ "nil" ], "filament_retraction_speed": [ @@ -117,32 +99,62 @@ "filament_wipe_distance": [ "nil" ], - "nozzle_temperature_initial_layer": [ - "200" + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" ], "full_fan_speed_layer": [ "0" ], - "fan_max_speed": [ - "100" + "hot_plate_temp": [ + "60" ], - "fan_min_speed": [ - "35" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; Filament gcode\n" + "hot_plate_temp_initial_layer": [ + "60" ], "nozzle_temperature": [ "200" ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], "temperature_vitrification": [ "100" ], - "compatible_printers":[] + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \nM106 P3 S0\n" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json index be50ef8fce..4d1b09d37a 100644 --- a/resources/profiles/BBL/filament/fdm_filament_hips.json +++ b/resources/profiles/BBL/filament/fdm_filament_hips.json @@ -1,85 +1,79 @@ { - "type": "filament", - "name": "fdm_filament_hips", - "from": "system", - "instantiation": "false", - "inherits": "fdm_filament_common", - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "90" - ], - "hot_plate_temp": [ - "90" - ], - "textured_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "fan_cooling_layer_time": [ - "10" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "HIPS" - ], - "filament_density": [ - "1.06" - ], - "filament_cost": [ - "22.99" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "0" - ], - "overhang_fan_threshold": [ - "25%" - ], - "overhang_fan_speed": [ - "80" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "6" - ], - "temperature_vitrification": [ - "100" - ], - "required_nozzle_HRC": [ - "3" - ], - "additional_cooling_fan_speed":[ - "0" - ] + "type": "filament", + "name": "fdm_filament_hips", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "hot_plate_temp": [ + "90" + ], + "textured_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "fan_cooling_layer_time": [ + "10" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "HIPS" + ], + "filament_density": [ + "1.06" + ], + "filament_cost": [ + "22.99" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "6" + ], + "additional_cooling_fan_speed": [ + "0" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json index 89d268af2e..1cd78ec77f 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pa.json +++ b/resources/profiles/BBL/filament/fdm_filament_pa.json @@ -1,79 +1,82 @@ { "type": "filament", "name": "fdm_filament_pa", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", - "required_nozzle_HRC": [ - "40" + "activate_air_filtration": [ + "1" ], "cool_plate_temp": [ "0" ], + "cool_plate_temp_initial_layer": [ + "0" + ], "eng_plate_temp": [ "100" ], - "hot_plate_temp": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], "eng_plate_temp_initial_layer": [ "100" ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], "fan_cooling_layer_time": [ "4" ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "PA" - ], - "filament_density": [ - "1.04" - ], - "filament_cost": [ - "20" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], "fan_max_speed": [ "60" ], "fan_min_speed": [ "0" ], - "overhang_fan_speed": [ - "30" + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" ], "nozzle_temperature": [ "290" ], - "temperature_vitrification": [ - "108" - ], - "nozzle_temperature_range_low": [ - "260" + "nozzle_temperature_initial_layer": [ + "290" ], "nozzle_temperature_range_high": [ "300" ], - "slow_down_min_speed": [ - "20" + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "required_nozzle_HRC": [ + "40" ], "slow_down_layer_time": [ "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json index 477812e6d5..5729114297 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pc.json +++ b/resources/profiles/BBL/filament/fdm_filament_pc.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json index e71333f631..4a5f6085ca 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pet.json +++ b/resources/profiles/BBL/filament/fdm_filament_pet.json @@ -1,64 +1,64 @@ { "type": "filament", "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "eng_plate_temp": [ "0" ], - "hot_plate_temp": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], "fan_cooling_layer_time": [ "20" ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], "filament_max_volumetric_speed": [ "25" ], "filament_type": [ "PETG" ], - "filament_density": [ - "1.27" + "hot_plate_temp": [ + "80" ], - "filament_cost": [ - "30" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_min_speed": [ - "20" + "hot_plate_temp_initial_layer": [ + "80" ], "nozzle_temperature": [ "255" ], - "temperature_vitrification": [ - "70" - ], - "nozzle_temperature_range_low": [ - "220" + "nozzle_temperature_initial_layer": [ + "255" ], "nozzle_temperature_range_high": [ "260" ], + "nozzle_temperature_range_low": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming" + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json index b90eebee88..8228827102 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pla.json +++ b/resources/profiles/BBL/filament/fdm_filament_pla.json @@ -1,46 +1,43 @@ { "type": "filament", "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "fan_cooling_layer_time": [ "100" ], "filament_max_volumetric_speed": [ "12" ], - "filament_type": [ - "PLA" - ], "filament_density": [ "1.24" ], "filament_cost": [ "20" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "35" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "55" ], - "textured_plate_temp" : [ + "textured_plate_temp": [ "55" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "35" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "55" ], - "textured_plate_temp_initial_layer" : [ + "textured_plate_temp_initial_layer": [ "55" ], "nozzle_temperature_initial_layer": [ @@ -49,18 +46,9 @@ "reduce_fan_stop_start_freq": [ "1" ], - "slow_down_for_layer_cooling": [ - "1" - ], - "fan_max_speed": [ - "100" - ], "fan_min_speed": [ "100" ], - "overhang_fan_speed": [ - "100" - ], "overhang_fan_threshold": [ "50%" ], @@ -89,6 +77,6 @@ "70" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_ppa.json b/resources/profiles/BBL/filament/fdm_filament_ppa.json new file mode 100644 index 0000000000..23b082b05c --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_ppa.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "fdm_filament_ppa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PPA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "210" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pps.json b/resources/profiles/BBL/filament/fdm_filament_pps.json new file mode 100644 index 0000000000..a3f104b6f3 --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_pps.json @@ -0,0 +1,79 @@ +{ + "type": "filament", + "name": "fdm_filament_pps", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "chamber_temperatures": [ + "60" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_type": [ + "PPS" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "340" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "0%" + ], + "slow_down_layer_time": [ + "2" + ], + "temperature_vitrification": [ + "125" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json index 4253f36169..870a18368f 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pva.json +++ b/resources/profiles/BBL/filament/fdm_filament_pva.json @@ -1,91 +1,91 @@ { "type": "filament", "name": "fdm_filament_pva", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], "cool_plate_temp": [ "45" ], + "cool_plate_temp_initial_layer": [ + "45" + ], "eng_plate_temp": [ "0" ], - "hot_plate_temp": [ - "55" - ], - "textured_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "45" - ], "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], "fan_cooling_layer_time": [ "100" ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_is_support": [ + "1" + ], "filament_max_volumetric_speed": [ "15" ], "filament_soluble": [ "1" ], - "filament_is_support": [ - "1" - ], "filament_type": [ "PVA" ], - "filament_density": [ - "1.24" + "hot_plate_temp": [ + "55" ], - "filament_cost": [ - "20" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_min_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "close_fan_the_first_x_layers": [ - "1" + "hot_plate_temp_initial_layer": [ + "55" ], "nozzle_temperature": [ "220" ], - "temperature_vitrification": [ - "55" - ], - "nozzle_temperature_range_low": [ - "190" + "nozzle_temperature_initial_layer": [ + "220" ], "nozzle_temperature_range_high": [ "240" ], - "slow_down_min_speed": [ - "50" + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" ], "slow_down_layer_time": [ "4" ], - "additional_cooling_fan_speed": [ - "70" + "slow_down_min_speed": [ + "50" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json index 5c490e0af8..126c101399 100644 --- a/resources/profiles/BBL/filament/fdm_filament_tpu.json +++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json @@ -1,79 +1,79 @@ { "type": "filament", "name": "fdm_filament_tpu", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", - "cool_plate_temp": [ - "30" - ], - "eng_plate_temp": [ - "30" - ], - "hot_plate_temp": [ - "35" - ], - "textured_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "30" - ], - "eng_plate_temp_initial_layer": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "100" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_type": [ - "TPU" - ], - "filament_density": [ - "1.24" - ], - "filament_cost": [ - "20" - ], - "filament_retraction_length": [ - "0.4" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_min_speed": [ - "100" - ], "additional_cooling_fan_speed": [ "70" ], "close_fan_the_first_x_layers": [ "1" ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_type": [ + "TPU" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], "nozzle_temperature": [ "240" ], - "temperature_vitrification": [ - "35" - ], - "nozzle_temperature_range_low": [ - "200" + "nozzle_temperature_initial_layer": [ + "240" ], "nozzle_temperature_range_high": [ "250" ], + "nozzle_temperature_range_low": [ + "200" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "35" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json new file mode 100644 index 0000000000..d8cea99515 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.2 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM021", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL A1M 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json new file mode 100644 index 0000000000..c7cbc79079 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -0,0 +1,66 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM020", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [], + "best_object_pos": "0.7x0.5", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], + "default_print_profile": "0.20mm Standard @BBL A1M", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_max_radius": "73", + "extruder_clearance_radius": "73", + "machine_load_filament_time": "28", + "machine_max_acceleration_z": [ + "1500", + "1500" + ], + "machine_max_jerk_e": [ + "3", + "3" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_unload_filament_time": "34", + "nozzle_type": "stainless_steel", + "nozzle_volume": "32", + "printable_area": [ + "0x0", + "180x0", + "180x180", + "0x180" + ], + "printable_height": "180", + "retract_lift_below":[ + "179" + ], + "printer_structure": "i3", + "scan_first_layer": "0", + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle" + ], + "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230912 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 1\nM400\nM18\nM109 S100\nM104 S140\nM400\nM17\nM400\nG28 X\n\nM221 X0 Y0 Z0 ;turn off soft endstop\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S1 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X50 Y175 F20000 ; find a soft place to home\nM104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80}\n\nG1 X90 Y-1 Z5 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A5 B55 C85 H15 K0 M20 O2\n;M970.3 Q0 A7 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n;M106 S255\nG29.2 S0 ; turn off ABL\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\n\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X32 Y185 F30000.1 ;Brush material\nG1 Z0.6 F30000.1\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\n\nG90\nM83\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\n\n\nM221 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S1 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X45 Y-4 F30000\n G0 Z0.2 F18000 ;Move to start position\n G0 X65 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X70 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X75 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X80 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X85 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X90 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X95 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X100 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X105 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X110 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X115 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X120 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X125 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X130 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nG90\nM83\nG0 X50 Y-2.7 F30000\nG0 Z0.2 F18000 ;Move to start position\nG0 X60 E4 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X65 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X70 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X75 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X80 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X85 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X90 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X95 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X100 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X105 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X110 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X120 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X125 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X130 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n", + "machine_end_gcode": ";===== date: 20230912 =====================\n;turn off nozzle clog detect\nG392 S0\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 F12000 ; move to safe pos \n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18\n", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", + "time_lapse_gcode": ";===================== date: 20230907 =====================\n\n; timelapse gcode\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n{if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X-6 Y170 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n G0 X90 Y90 F30000\n{endif}\n", + "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230913 =======================\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\n; FLUSH_START\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S1\n" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json new file mode 100644 index 0000000000..3ef6460dc4 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.6 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM022", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL A1M 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "nozzle_type": "hardened_steel", + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json new file mode 100644 index 0000000000..82fcdb8140 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.8 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM023", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @BBL A1M 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "nozzle_type": "hardened_steel", + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json new file mode 100644 index 0000000000..c32ab2c90e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Bambu Lab A1 mini", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "model_id": "N1", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "machine_tech": "FFF", + "family": "BBL-3DP", + "bed_model": "bbl-3dp-A1M.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_materials": "Generic PLA @BBL A1M;Generic PLA Silk @BBL A1M;Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu ABS @BBL P1P;Bambu PC @BBL P1P;Bambu Support W @BBL A1M;Bambu TPU 95A @BBL P1P;PolyTerra PLA @BBL A1M;PolyLite PLA @BBL A1M;" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json index e6b9b9535e..31aa9e7c85 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM010", "name": "Bambu Lab P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM010", + "instantiation": "true", "nozzle_diameter": [ "0.2" ], @@ -14,16 +14,12 @@ "Bambu PLA Basic @BBL X1C 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle", - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.14" ], "min_layer_height": [ "0.04" ], - "z_hop": [ - "0.2" - ], "retraction_length": [ "0.4" ], @@ -31,5 +27,6 @@ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab X1 Carbon 0.2 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index 0e10608f0e..247608475c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM013", "name": "Bambu Lab P1P 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM013", + "instantiation": "true", "nozzle_diameter": [ "0.4" ], @@ -24,9 +24,7 @@ "extruder_offset": [ "0x2" ], - "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "machine_load_filament_time": "29", - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "0", @@ -37,5 +35,7 @@ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json index 7ad26c3f4a..e2e35ce501 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM011", "name": "Bambu Lab P1P 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM011", + "instantiation": "true", "nozzle_diameter": [ "0.6" ], @@ -14,7 +14,6 @@ "Bambu PLA Basic @BBL X1" ], "default_print_profile": "0.30mm Standard @BBL P1P 0.6 nozzle", - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.42" ], @@ -35,5 +34,6 @@ "Bambu Lab P1S 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json index 97a163e463..04375fdf73 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM012", "name": "Bambu Lab P1P 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM012", + "instantiation": "true", "nozzle_diameter": [ "0.8" ], @@ -14,7 +14,6 @@ "Bambu PLA Basic @BBL X1" ], "default_print_profile": "0.40mm Standard @BBL P1P 0.8 nozzle", - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.56" ], @@ -35,5 +34,6 @@ "Bambu Lab P1S 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P.json b/resources/profiles/BBL/machine/Bambu Lab P1P.json index 6a668a6829..ee2f9ec05a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P.json @@ -1,12 +1,12 @@ { "type": "machine_model", "name": "Bambu Lab P1P", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "model_id": "C11", "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "BBL-3DP", "bed_model": "bbl-3dp-X1.stl", "bed_texture": "bbl-3dp-logo.svg", "default_materials": "Generic PLA @BBL P1P;Generic PLA Silk @BBL P1P;Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu ABS @BBL P1P;Bambu PC @BBL P1P;Bambu Support W @BBL P1P;Bambu TPU 95A @BBL P1P;PolyTerra PLA @BBL P1P;PolyLite PLA @BBL P1P;" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json index 9db911f89e..2ef87a37ad 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json @@ -1,23 +1,19 @@ { "type": "machine", - "setting_id": "GM015", "name": "Bambu Lab P1S 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM015", + "instantiation": "true", "nozzle_diameter": [ "0.2" ], - "z_hop": [ - "0.2" - ], "printer_model": "Bambu Lab P1S", "printer_variant": "0.2", "default_filament_profile": [ "Bambu PLA Basic @BBL X1C 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle", - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.14" ], @@ -31,5 +27,6 @@ "Bambu Lab P1P 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab X1 Carbon 0.2 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index 49408fd8eb..8fd2c82da3 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM014", "name": "Bambu Lab P1S 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM014", + "instantiation": "true", "nozzle_diameter": [ "0.4" ], @@ -23,9 +23,7 @@ "extruder_offset": [ "0x2" ], - "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "machine_load_filament_time": "29", - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "0", @@ -36,5 +34,7 @@ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json index 217ca46574..dbae519daa 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json @@ -1,20 +1,19 @@ { "type": "machine", - "setting_id": "GM016", "name": "Bambu Lab P1S 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM016", + "instantiation": "true", "nozzle_diameter": [ "0.6" ], + "printer_model": "Bambu Lab P1S", + "printer_variant": "0.6", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.6", "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.42" ], @@ -32,5 +31,6 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json index 59af4cef54..8c48198d33 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json @@ -1,23 +1,22 @@ { "type": "machine", - "setting_id": "GM017", "name": "Bambu Lab P1S 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM017", + "instantiation": "true", "nozzle_diameter": [ "0.8" ], + "printer_model": "Bambu Lab P1S", + "printer_variant": "0.8", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.8", "default_filament_profile": [ "Bambu PLA Basic @BBL X1" ], "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", - "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "max_layer_height": [ "0.56" ], @@ -35,5 +34,6 @@ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle" - ] -} + ], + "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json index 95137bb887..407df99c0c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json @@ -9,4 +9,4 @@ "bed_model": "bbl-3dp-X1.stl", "bed_texture": "bbl-3dp-logo.svg", "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index ddaa4a05a7..5c0352f9bf 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -1,23 +1,19 @@ { "type": "machine", - "setting_id": "GM008", "name": "Bambu Lab X1 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM008", + "instantiation": "true", "nozzle_diameter": [ "0.2" ], - "z_hop": [ - "0.2" - ], "printer_model": "Bambu Lab X1", "printer_variant": "0.2", "default_filament_profile": [ "Bambu PLA Basic @BBL X1C 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.14" ], @@ -28,8 +24,9 @@ "0.4" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.2 nozzle", "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", "Bambu Lab X1 Carbon 0.2 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index 1449a4b174..69975f20e3 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM003", "name": "Bambu Lab X1 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM003", + "instantiation": "true", "nozzle_diameter": [ "0.4" ], @@ -25,7 +25,6 @@ "0x2" ], "machine_load_filament_time": "29", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "1", @@ -33,8 +32,9 @@ "0.4" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle" - ] -} + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index 7a9d8d4b77..b6e49250c0 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -1,20 +1,19 @@ { "type": "machine", - "setting_id": "GM006", "name": "Bambu Lab X1 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM006", + "instantiation": "true", "nozzle_diameter": [ "0.6" ], + "printer_model": "Bambu Lab X1", + "printer_variant": "0.6", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.6", "default_print_profile": "0.30mm Standard @BBL X1 0.6 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.42" ], @@ -29,8 +28,9 @@ "3" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index 0656dbfce4..6a3b52e579 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -1,20 +1,19 @@ { "type": "machine", - "setting_id": "GM007", "name": "Bambu Lab X1 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM007", + "instantiation": "true", "nozzle_diameter": [ "0.8" ], + "printer_model": "Bambu Lab X1", + "printer_variant": "0.8", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.8", "default_print_profile": "0.40mm Standard @BBL X1 0.8 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.56" ], @@ -29,8 +28,9 @@ "3" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index 303c06199b..84b682ce57 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -1,23 +1,19 @@ { "type": "machine", - "setting_id": "GM002", "name": "Bambu Lab X1 Carbon 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM002", + "instantiation": "true", "nozzle_diameter": [ "0.2" ], - "z_hop": [ - "0.2" - ], "printer_model": "Bambu Lab X1 Carbon", "printer_variant": "0.2", "default_filament_profile": [ "Bambu PLA Basic @BBL X1C 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.14" ], @@ -29,8 +25,9 @@ "0.4" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.2 nozzle", "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", "Bambu Lab X1 0.2 nozzle" - ] -} + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 2e20b54c5c..8139efe731 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "GM001", "name": "Bambu Lab X1 Carbon 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM001", + "instantiation": "true", "nozzle_diameter": [ "0.4" ], @@ -24,7 +24,6 @@ "0x2" ], "machine_load_filament_time": "29", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "machine_unload_filament_time": "28", "scan_first_layer": "1", "z_hop": [ @@ -32,8 +31,9 @@ ], "printer_structure": "corexy", "upward_compatible_machine": [ - "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 0.4 nozzle" - ] -} + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 2b11147165..1aa8c94661 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -1,20 +1,19 @@ { "type": "machine", - "setting_id": "GM005", "name": "Bambu Lab X1 Carbon 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM005", + "instantiation": "true", "nozzle_diameter": [ "0.6" ], + "printer_model": "Bambu Lab X1 Carbon", + "printer_variant": "0.6", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.6", "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.42" ], @@ -28,8 +27,9 @@ "3" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.6 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index 9ea0ed8377..ac6d31e35c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -1,23 +1,22 @@ { "type": "machine", - "setting_id": "GM004", "name": "Bambu Lab X1 Carbon 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM004", + "instantiation": "true", "nozzle_diameter": [ "0.8" ], + "printer_model": "Bambu Lab X1 Carbon", + "printer_variant": "0.8", "z_hop": [ "0.4" ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.8", "default_filament_profile": [ "Bambu PLA Basic @BBL X1C 0.8 nozzle" ], "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", "max_layer_height": [ "0.56" ], @@ -31,8 +30,9 @@ "3" ], "upward_compatible_machine": [ - "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", "Bambu Lab X1 0.8 nozzle" - ] + ], + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json index bf6fc31142..fea08f27e8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json @@ -1,12 +1,12 @@ { "type": "machine_model", "name": "Bambu Lab X1 Carbon", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "model_id": "BL-P001", "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", - "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "BBL-3DP", "bed_model": "bbl-3dp-X1.stl", "bed_texture": "bbl-3dp-logo.svg", "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1C;Bambu TPU 95A @BBL X1C;PolyTerra PLA @BBL X1C;PolyLite PLA @BBL X1C;" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1.json b/resources/profiles/BBL/machine/Bambu Lab X1.json index f97bc01ca2..22e29b15b2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1.json @@ -1,12 +1,12 @@ { "type": "machine_model", "name": "Bambu Lab X1", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "model_id": "BL-P002", "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "BBL-3DP", "bed_model": "bbl-3dp-X1.stl", "bed_texture": "bbl-3dp-logo.svg", "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json new file mode 100644 index 0000000000..ebc0ce597e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json @@ -0,0 +1,34 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.2 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM025", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "nozzle_type": "stainless_steel", + "retraction_length": [ + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature and wait ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S100 ; reset chamber fan cmd\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json new file mode 100644 index 0000000000..1f08b9bb5f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json @@ -0,0 +1,39 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM026", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.4", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "extruder_offset": [ + "0x2" + ], + "machine_load_filament_time": "29", + "machine_unload_filament_time": "28", + "scan_first_layer": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature and wait ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S100 ; reset chamber fan cmd\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", + "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json new file mode 100644 index 0000000000..d5da018423 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.6 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM027", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" + ], + "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature and wait ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S100 ; reset chamber fan cmd\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json new file mode 100644 index 0000000000..24c677e158 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.8 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM028", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature and wait ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S100 ; reset chamber fan cmd\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E.json b/resources/profiles/BBL/machine/Bambu Lab X1E.json new file mode 100644 index 0000000000..0c7396a5c1 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Bambu Lab X1E", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "C13", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", + "default_materials": "Bambu ABS @BBL X1E;Bambu PC @BBL X1E;Generic PLA Silk @BBL X1C;Generic PLA @BBL X1C;Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu Support W @BBL X1C;Bambu TPU 95A @BBL X1C;PolyLite PLA @BBL X1C;PolyTerra PLA @BBL X1C" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json index cb49e08780..4d61d88f87 100644 --- a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json +++ b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json @@ -1,8 +1,13 @@ { "type": "machine", "name": "fdm_bbl_3dp_001_common", + "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", "printable_area": [ "0x0", "256x0", @@ -27,11 +32,6 @@ "extruder_colour": [ "#018001" ], - "extruder_offset": [ - "0x0" - ], - "gcode_flavor": "marlin", - "inherits": "fdm_machine_common", "machine_max_acceleration_e": [ "5000", "5000" @@ -100,27 +100,13 @@ "0", "0" ], - "max_layer_height": [ - "0.28" - ], - "min_layer_height": [ - "0.08" - ], - "printable_height": "250", "retract_lift_below":[ "249" ], "extruder_clearance_radius": "57", "extruder_clearance_max_radius": "68", - "extruder_clearance_height_to_rod": "36", "extruder_clearance_height_to_lid": "90", "nozzle_volume": "107", - "nozzle_diameter": [ - "0.4" - ], - "printer_settings_id": "", - "printer_technology": "FFF", - "printer_variant": "0.4", "printer_structure": "corexy", "best_object_pos":"0.5x0.5", "retraction_minimum_travel": [ @@ -129,9 +115,6 @@ "retract_before_wipe": [ "0%" ], - "retract_when_changing_layer": [ - "1" - ], "retraction_length": [ "0.8" ], @@ -141,12 +124,6 @@ "z_hop": [ "0.4" ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], "retraction_speed": [ "30" ], @@ -154,16 +131,12 @@ "30" ], "z_hop_types": [ - "Auto Lift" + "Auto Lift" ], "nozzle_type": "hardened_steel", - "silent_mode": "0", "single_extruder_multi_material": "1", - "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A", - "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", - "machine_pause_gcode": "M400 U1", - "wipe": [ - "1" - ] -} + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", + "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A", + "machine_pause_gcode": "M400 U1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json index 032684e2f1..c161bc9a81 100644 --- a/resources/profiles/BBL/machine/fdm_machine_common.json +++ b/resources/profiles/BBL/machine/fdm_machine_common.json @@ -3,6 +3,10 @@ "name": "fdm_machine_common", "from": "system", "instantiation": "false", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", "support_chamber_temp_control": "0", "printer_technology": "FFF", "deretraction_speed": [ @@ -74,11 +78,7 @@ "extruder_clearance_radius": "65", "extruder_clearance_height_to_rod": "36", "extruder_clearance_height_to_lid": "140", - "nozzle_diameter": [ - "0.4" - ], "printer_settings_id": "", - "printer_variant": "0.4", "retraction_minimum_travel": [ "2" ], @@ -107,13 +107,14 @@ "60" ], "single_extruder_multi_material": "0", - "change_filament_gcode": "", + "support_air_filtration": "0", "wipe": [ "1" ], - "default_filament_profile":[], + "default_filament_profile": [], "default_print_profile": "0.16mm Optimal @BBL X1C", "upward_compatible_machine": [], "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", - "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" -} + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end", + "change_filament_gcode": "" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..6bf7c54a93 --- /dev/null +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.06mm Fine @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_bbl_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP050", + "instantiation": "true", + "default_acceleration": "4000", + "outer_wall_acceleration": "2000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json index afcd48090f..7a9b9bf315 100644 --- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP024", - "name": "0.06mm Standard @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.06_nozzle_0.2", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "process", + "name": "0.06mm Standard @BBL X1C 0.2 nozzle", + "inherits": "fdm_process_bbl_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP024", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json new file mode 100644 index 0000000000..0d813e098b --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "name": "0.08mm Extra Fine @BBL A1M", + "inherits": "fdm_process_bbl_0.08", + "from": "system", + "setting_id": "GP049", + "instantiation": "true", + "default_acceleration": "4000", + "gap_infill_speed": "240", + "inner_wall_speed": "120", + "internal_solid_infill_speed": "220", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_speed": "200", + "top_surface_speed": "150", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json index 6db745a9a9..bc9f93e282 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP018", "name": "0.08mm Extra Fine @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.08", + "from": "system", + "setting_id": "GP018", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" + "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json index 10981794ef..f591722386 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP001", "name": "0.08mm Extra Fine @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.08", + "from": "system", + "setting_id": "GP001", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..6577e54679 --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.08mm Optimal @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_bbl_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP051", + "instantiation": "true", + "default_acceleration": "4000", + "outer_wall_acceleration": "2000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json index 42cfda4fd4..d584de99c7 100644 --- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP025", - "name": "0.08mm Standard @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.08_nozzle_0.2", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm Standard @BBL X1C 0.2 nozzle", + "inherits": "fdm_process_bbl_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP025", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..26391c069f --- /dev/null +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "process", + "name": "0.10mm Standard @BBL A1M 0.2 nozzle", + "inherits": "0.10mm Standard @BBL P1P 0.2 nozzle", + "from": "system", + "setting_id": "GP039", + "instantiation": "true", + "default_acceleration": "4000", + "outer_wall_acceleration": "2000", + "travel_speed": "700", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json index 2635ae9807..0b50342c13 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json @@ -1,12 +1,12 @@ { - "type": "process", - "setting_id": "GP014", - "name": "0.10mm Standard @BBL P1P 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.10_nozzle_0.2", - "elefant_foot_compensation": "0.15", - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL P1P 0.2 nozzle", + "inherits": "fdm_process_bbl_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP014", + "instantiation": "true", + "elefant_foot_compensation": "0.15", + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json index 86c5ccc347..5fff3ebd87 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP007", "name": "0.10mm Standard @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP007", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..36a9bcb524 --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.12mm Draft @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_bbl_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP052", + "instantiation": "true", + "default_acceleration": "4000", + "outer_wall_acceleration": "2000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json new file mode 100644 index 0000000000..d14b5906b5 --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json @@ -0,0 +1,18 @@ +{ + "type": "process", + "name": "0.12mm Fine @BBL A1M", + "inherits": "fdm_process_bbl_0.12", + "from": "system", + "setting_id": "GP044", + "instantiation": "true", + "default_acceleration": "4000", + "gap_infill_speed": "300", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "280", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "80", + "sparse_infill_speed": "240", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json index 276726a7fb..03afc8bee0 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP019", "name": "0.12mm Fine @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.12", + "from": "system", + "setting_id": "GP019", + "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json index a1e2466f24..16c75d85ce 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP002", "name": "0.12mm Fine @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.12", + "from": "system", + "setting_id": "GP002", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json index 255f407950..d36cce2026 100644 --- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP026", - "name": "0.12mm Standard @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.12_nozzle_0.2", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Standard @BBL X1C 0.2 nozzle", + "inherits": "fdm_process_bbl_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP026", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..24031af251 --- /dev/null +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_bbl_0.14_nozzle_0.2", + "from": "system", + "setting_id": "GP053", + "instantiation": "true", + "default_acceleration": "4000", + "outer_wall_acceleration": "2000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json index 38ba642cdb..d486de8697 100644 --- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP027", - "name": "0.14mm Standard @BBL X1C 0.2 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.14_nozzle_0.2", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "process", + "name": "0.14mm Standard @BBL X1C 0.2 nozzle", + "inherits": "fdm_process_bbl_0.14_nozzle_0.2", + "from": "system", + "setting_id": "GP027", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json new file mode 100644 index 0000000000..ccaa45ed2e --- /dev/null +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.16mm Optimal @BBL A1M", + "inherits": "fdm_process_bbl_0.16", + "from": "system", + "setting_id": "GP045", + "instantiation": "true", + "default_acceleration": "4000", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "280", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "80", + "sparse_infill_speed": "240", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json index d276425b61..1e0462da79 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP020", "name": "0.16mm Optimal @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.16", + "from": "system", + "setting_id": "GP020", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" + "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json index f0d4847185..2465e38c1d 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP003", "name": "0.16mm Optimal @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.16", + "from": "system", + "setting_id": "GP003", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..8d15a991c7 --- /dev/null +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.18mm Fine @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_bbl_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP062", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json index 632362feea..ad403a0007 100644 --- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP028", - "name": "0.18mm Standard @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.18_nozzle_0.6", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "process", + "name": "0.18mm Standard @BBL X1C 0.6 nozzle", + "inherits": "fdm_process_bbl_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP028", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json index 2be87d8614..0a01e92daa 100644 --- a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json @@ -16,6 +16,8 @@ "enable_prime_tower": "1", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json new file mode 100644 index 0000000000..c168acda49 --- /dev/null +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.20mm Standard @BBL A1M", + "inherits": "0.20mm Standard @BBL P1P", + "from": "system", + "setting_id": "GP000", + "instantiation": "true", + "default_acceleration": "6000", + "travel_speed": "700", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json index c6fdb3e920..1b60746efc 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json @@ -1,12 +1,11 @@ { - "type": "process", - "setting_id": "GP015", - "name": "0.20mm Standard @BBL P1P", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.20", - "elefant_foot_compensation": "0.15", - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "process", + "name": "0.20mm Standard @BBL P1P", + "inherits": "fdm_process_bbl_0.20", + "from": "system", + "setting_id": "GP015", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json index 0f392355d9..1d05bdfa6f 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP004", "name": "0.20mm Standard @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.20", + "from": "system", + "setting_id": "GP004", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json new file mode 100644 index 0000000000..89187be4c9 --- /dev/null +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.20mm Strength @BBL A1M", + "inherits": "0.20mm Strength @BBL P1P", + "from": "system", + "setting_id": "GP046", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json index 5a9ef9a384..c38f5f7118 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json @@ -1,14 +1,14 @@ { "type": "process", - "setting_id": "GP021", "name": "0.20mm Strength @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.20", + "from": "system", + "setting_id": "GP021", + "instantiation": "true", "outer_wall_speed": "60", - "wall_loops": "6", "sparse_infill_density": "25%", + "wall_loops": "6", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" + "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json index 658db119cd..27b9c03128 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json @@ -1,16 +1,17 @@ { "type": "process", - "setting_id": "GP013", "name": "0.20mm Strength @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.20", + "from": "system", + "setting_id": "GP013", + "instantiation": "true", "outer_wall_speed": "60", "wall_loops": "6", "sparse_infill_density": "25%", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json new file mode 100644 index 0000000000..87494e0446 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.24mm Draft @BBL A1M", + "inherits": "fdm_process_bbl_0.24", + "from": "system", + "setting_id": "GP047", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json index 46ef476717..87866d4f72 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP022", "name": "0.24mm Draft @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.24", + "from": "system", + "setting_id": "GP022", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" + "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json index a8483c1d5e..4ef6dae40e 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP005", "name": "0.24mm Draft @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.24", + "from": "system", + "setting_id": "GP005", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..be8079ead4 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.24mm Fine @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_bbl_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP057", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..32244b2450 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.24mm Optimal @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_bbl_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP054", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json index c529637371..7870260cab 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP029", - "name": "0.24mm Standard @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.24_nozzle_0.6", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "process", + "name": "0.24mm Standard @BBL X1C 0.6 nozzle", + "inherits": "fdm_process_bbl_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP029", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json index 1bd8407ae5..3a50374efa 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP032", - "name": "0.24mm Standard @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.24_nozzle_0.8", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Standard @BBL X1C 0.8 nozzle", + "inherits": "fdm_process_bbl_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP032", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json new file mode 100644 index 0000000000..4b1e483edd --- /dev/null +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.28mm Extra Draft @BBL A1M", + "inherits": "fdm_process_bbl_0.28", + "from": "system", + "setting_id": "GP048", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json index 764059d139..ca64d1e316 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP023", "name": "0.28mm Extra Draft @BBL P1P", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.28", + "from": "system", + "setting_id": "GP023", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" + "Bambu Lab P1P 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json index 7dca7acee6..211a43a31e 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json @@ -1,13 +1,14 @@ { "type": "process", - "setting_id": "GP006", "name": "0.28mm Extra Draft @BBL X1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.28", + "from": "system", + "setting_id": "GP006", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..960ad6d6c2 --- /dev/null +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.30mm Standard @BBL A1M 0.6 nozzle", + "inherits": "0.30mm Standard @BBL P1P 0.6 nozzle", + "from": "system", + "setting_id": "GP038", + "instantiation": "true", + "default_acceleration": "6000", + "travel_speed": "700", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json index 0d2edb4f22..37b7593e8d 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json @@ -1,12 +1,12 @@ { - "type": "process", - "setting_id": "GP016", - "name": "0.30mm Standard @BBL P1P 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.30_nozzle_0.6", - "elefant_foot_compensation": "0.15", - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Standard @BBL P1P 0.6 nozzle", + "inherits": "fdm_process_bbl_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP016", + "instantiation": "true", + "elefant_foot_compensation": "0.15", + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json index 174a8c3460..d6114dface 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP011", "name": "0.30mm Standard @BBL X1 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP011", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json index ca96c93c7d..31e55d13fd 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json @@ -1,12 +1,13 @@ { "type": "process", - "setting_id": "GP010", "name": "0.30mm Standard @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP010", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..22ff320e19 --- /dev/null +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.30mm Strength @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_bbl_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP061", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json index c50b7e93de..b1a7451a46 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json @@ -1,15 +1,16 @@ { - "type": "process", - "setting_id": "GP036", - "name": "0.30mm Strength @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.30_nozzle_0.6", - "wall_loops": "4", - "sparse_infill_density":"25%", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Strength @BBL X1C 0.6 nozzle", + "inherits": "fdm_process_bbl_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP036", + "instantiation": "true", + "wall_loops": "4", + "sparse_infill_density": "25%", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..79187a83d7 --- /dev/null +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.32mm Optimal @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_bbl_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP058", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json index 81d6e630f5..e6cd89b08b 100644 --- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP033", - "name": "0.32mm Standard @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.32_nozzle_0.8", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Standard @BBL X1C 0.8 nozzle", + "inherits": "fdm_process_bbl_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP033", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..54e6f0d664 --- /dev/null +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.36mm Draft @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_bbl_0.36_nozzle_0.6", + "from": "system", + "setting_id": "GP055", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json index 6e8c3d10ff..9afac00ad1 100644 --- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP030", - "name": "0.36mm Standard @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.36_nozzle_0.6", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "process", + "name": "0.36mm Standard @BBL X1C 0.6 nozzle", + "inherits": "fdm_process_bbl_0.36_nozzle_0.6", + "from": "system", + "setting_id": "GP030", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..9b23f80d09 --- /dev/null +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "name": "0.40mm Standard @BBL A1M 0.8 nozzle", + "inherits": "0.40mm Standard @BBL P1P 0.8 nozzle", + "from": "system", + "setting_id": "GP037", + "instantiation": "true", + "default_acceleration": "6000", + "travel_speed": "700", + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json index 9f47ebfd53..547915d19e 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json @@ -1,12 +1,12 @@ { - "type": "process", - "setting_id": "GP017", - "name": "0.40mm Standard @BBL P1P 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.40_nozzle_0.8", - "elefant_foot_compensation": "0.15", - "compatible_printers": [ - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL P1P 0.8 nozzle", + "inherits": "fdm_process_bbl_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP017", + "instantiation": "true", + "elefant_foot_compensation": "0.15", + "compatible_printers": [ + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json index 852d9e97aa..e9aa8d1836 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "GP012", "name": "0.40mm Standard @BBL X1 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP012", + "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json index 85ed2203d3..b6d0c07917 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json @@ -1,12 +1,13 @@ { "type": "process", - "setting_id": "GP009", "name": "0.40mm Standard @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_bbl_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP009", + "instantiation": "true", "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json new file mode 100644 index 0000000000..9b9aabbac0 --- /dev/null +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.42mm Extra Draft @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_bbl_0.42_nozzle_0.6", + "from": "system", + "setting_id": "GP056", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json index 59221c3100..a6951dd6bb 100644 --- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP031", - "name": "0.42mm Standard @BBL X1C 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.42_nozzle_0.6", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] + "type": "process", + "name": "0.42mm Standard @BBL X1C 0.6 nozzle", + "inherits": "fdm_process_bbl_0.42_nozzle_0.6", + "from": "system", + "setting_id": "GP031", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..46c7bb91d4 --- /dev/null +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.48mm Draft @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_bbl_0.48_nozzle_0.8", + "from": "system", + "setting_id": "GP059", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json index 38cd043b4d..0b259149d0 100644 --- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP034", - "name": "0.48mm Standard @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.48_nozzle_0.8", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "process", + "name": "0.48mm Standard @BBL X1C 0.8 nozzle", + "inherits": "fdm_process_bbl_0.48_nozzle_0.8", + "from": "system", + "setting_id": "GP034", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..c3def4c759 --- /dev/null +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.56mm Extra Draft @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_bbl_0.56_nozzle_0.8", + "from": "system", + "setting_id": "GP060", + "instantiation": "true", + "default_acceleration": "6000", + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json index 421deb5b39..c5c002865d 100644 --- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json @@ -1,13 +1,14 @@ { - "type": "process", - "setting_id": "GP035", - "name": "0.56mm Standard @BBL X1C 0.8 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.56_nozzle_0.8", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "process", + "name": "0.56mm Standard @BBL X1C 0.8 nozzle", + "inherits": "fdm_process_bbl_0.56_nozzle_0.8", + "from": "system", + "setting_id": "GP035", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json index 35257823ae..c01ea54987 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "fdm_process_bbl_0.06_nozzle_0.2", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.06", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "initial_layer_line_width": "0.25", - "sparse_infill_line_width": "0.22", - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "support_line_width": "0.22", - "top_surface_line_width": "0.22", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150" -} + "type": "process", + "name": "fdm_process_bbl_0.06_nozzle_0.2", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.06", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08.json index 0348c33427..836980d3fd 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.08.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08.json @@ -1,9 +1,9 @@ { "type": "process", "name": "fdm_process_bbl_0.08", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.08", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "7", @@ -16,11 +16,9 @@ "inner_wall_speed": "350", "sparse_infill_speed": "450", "internal_solid_infill_speed": "350", - "top_surface_speed": "200", "gap_infill_speed": "350", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", "support_threshold_angle": "15" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json index 90fae21397..43a8b60f07 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "fdm_process_bbl_0.08_nozzle_0.2", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.08", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "initial_layer_line_width": "0.25", - "sparse_infill_line_width": "0.22", - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "support_line_width": "0.22", - "top_surface_line_width": "0.22", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150" -} + "type": "process", + "name": "fdm_process_bbl_0.08_nozzle_0.2", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.08", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json index a53df8b5a9..cc7d773953 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json @@ -1,9 +1,9 @@ { "type": "process", "name": "fdm_process_bbl_0.10_nozzle_0.2", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.1", "initial_layer_print_height": "0.1", "wall_loops": "4", @@ -22,4 +22,4 @@ "initial_layer_infill_speed": "70", "sparse_infill_speed": "100", "top_surface_speed": "150" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12.json index dcbb2f9a4b..e76673b434 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.12.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12.json @@ -1,9 +1,9 @@ { "type": "process", "name": "fdm_process_bbl_0.12", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.12", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", @@ -16,11 +16,9 @@ "inner_wall_speed": "350", "sparse_infill_speed": "430", "internal_solid_infill_speed": "350", - "top_surface_speed": "200", "gap_infill_speed": "350", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", "support_threshold_angle": "20" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json index 8a76d4c7cb..040df9f8a9 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "fdm_process_bbl_0.12_nozzle_0.2", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.12", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "initial_layer_line_width": "0.25", - "sparse_infill_line_width": "0.22", - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "support_line_width": "0.22", - "top_surface_line_width": "0.22", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150" -} + "type": "process", + "name": "fdm_process_bbl_0.12_nozzle_0.2", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.12", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json index 81bd28b30c..be12c21e1c 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "fdm_process_bbl_0.14_nozzle_0.2", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.14", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "initial_layer_line_width": "0.25", - "sparse_infill_line_width": "0.22", - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "support_line_width": "0.22", - "top_surface_line_width": "0.22", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150" -} + "type": "process", + "name": "fdm_process_bbl_0.14_nozzle_0.2", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.14", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.16.json b/resources/profiles/BBL/process/fdm_process_bbl_0.16.json index 14186f7170..3c435f4225 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.16.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.16.json @@ -1,9 +1,9 @@ { "type": "process", "name": "fdm_process_bbl_0.16", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", @@ -16,11 +16,9 @@ "inner_wall_speed": "300", "sparse_infill_speed": "330", "internal_solid_infill_speed": "300", - "top_surface_speed": "200", "gap_infill_speed": "300", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", "support_threshold_angle": "25" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json index 1a9120fdb9..3baf1fd45d 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json @@ -1,34 +1,24 @@ { - "type": "process", - "name": "fdm_process_bbl_0.18_nozzle_0.6", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.18", - "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "initial_layer_line_width": "0.62", - "sparse_infill_line_width": "0.62", - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10" -} + "type": "process", + "name": "fdm_process_bbl_0.18_nozzle_0.6", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.18", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.20.json b/resources/profiles/BBL/process/fdm_process_bbl_0.20.json index 12fe82dd12..d48f4a29a1 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.20.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.20.json @@ -1,13 +1,10 @@ { "type": "process", "name": "fdm_process_bbl_0.20", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.2", "elefant_foot_compensation": "0.15", - "bottom_shell_layers": "3", - "top_shell_layers": "3", "top_shell_thickness": "0.6", "bridge_flow": "1", "initial_layer_speed": "50", @@ -16,6 +13,5 @@ "inner_wall_speed": "300", "sparse_infill_speed": "270", "internal_solid_infill_speed": "250", - "top_surface_speed": "200", "gap_infill_speed": "250" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24.json index 3b83ea159c..02e7595c7b 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.24.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24.json @@ -1,14 +1,12 @@ { "type": "process", "name": "fdm_process_bbl_0.24", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", - "bottom_shell_layers": "3", - "top_shell_layers": "3", "top_shell_thickness": "0.6", "bridge_flow": "1", "initial_layer_speed": "50", @@ -17,7 +15,6 @@ "inner_wall_speed": "230", "sparse_infill_speed": "230", "internal_solid_infill_speed": "230", - "top_surface_speed": "200", "gap_infill_speed": "230", "support_threshold_angle": "35" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json index aec643962c..514e31759a 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json @@ -1,34 +1,24 @@ { - "type": "process", - "name": "fdm_process_bbl_0.24_nozzle_0.6", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.24", - "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "initial_layer_line_width": "0.62", - "sparse_infill_line_width": "0.62", - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10" -} + "type": "process", + "name": "fdm_process_bbl_0.24_nozzle_0.6", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json index 9c1cbf2028..5fedaf53d6 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json @@ -1,35 +1,26 @@ { - "type": "process", - "name": "fdm_process_bbl_0.24_nozzle_0.8", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.24", - "initial_layer_print_height": "0.4", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "initial_layer_line_width": "0.82", - "sparse_infill_line_width": "0.82", - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5" -} + "type": "process", + "name": "fdm_process_bbl_0.24_nozzle_0.8", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.28.json b/resources/profiles/BBL/process/fdm_process_bbl_0.28.json index 08f80a2ef0..1c70a95b9b 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.28.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.28.json @@ -1,14 +1,12 @@ { "type": "process", "name": "fdm_process_bbl_0.28", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", - "bottom_shell_layers": "3", - "top_shell_layers": "3", "top_shell_thickness": "0.6", "bridge_flow": "1", "initial_layer_speed": "50", @@ -17,7 +15,6 @@ "inner_wall_speed": "200", "sparse_infill_speed": "200", "internal_solid_infill_speed": "200", - "top_surface_speed": "200", "gap_infill_speed": "200", "support_threshold_angle": "40" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json index ed6ce69744..26b39f3736 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json @@ -1,14 +1,11 @@ { "type": "process", "name": "fdm_process_bbl_0.30_nozzle_0.6", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.3", "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", @@ -20,15 +17,8 @@ "top_surface_line_width": "0.62", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", "top_surface_speed": "150", - "gap_infill_speed": "50", "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10" -} + "overhang_3_4_speed": "15" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json index d64d4b6f24..12320f79f8 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json @@ -1,35 +1,26 @@ { - "type": "process", - "name": "fdm_process_bbl_0.32_nozzle_0.8", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.32", - "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "initial_layer_line_width": "0.82", - "sparse_infill_line_width": "0.82", - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5" -} + "type": "process", + "name": "fdm_process_bbl_0.32_nozzle_0.8", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.32", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json index a8a8a1387a..f94531fbe3 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json @@ -1,34 +1,24 @@ { - "type": "process", - "name": "fdm_process_bbl_0.36_nozzle_0.6", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.36", - "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "initial_layer_line_width": "0.62", - "sparse_infill_line_width": "0.62", - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10" -} + "type": "process", + "name": "fdm_process_bbl_0.36_nozzle_0.6", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.36", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json index 503a81b4df..3e0d8b147e 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json @@ -1,14 +1,11 @@ { "type": "process", "name": "fdm_process_bbl_0.40_nozzle_0.8", + "inherits": "fdm_process_bbl_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_bbl_common", "layer_height": "0.4", "initial_layer_print_height": "0.4", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", @@ -21,15 +18,9 @@ "top_surface_pattern": "monotonic", "initial_layer_speed": "35", "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", "top_surface_speed": "150", - "gap_infill_speed": "50", "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json index 7d9309c1b1..07120eef78 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json @@ -1,34 +1,24 @@ { - "type": "process", - "name": "fdm_process_bbl_0.42_nozzle_0.6", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.42", - "initial_layer_print_height": "0.3", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "initial_layer_line_width": "0.62", - "sparse_infill_line_width": "0.62", - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10" -} + "type": "process", + "name": "fdm_process_bbl_0.42_nozzle_0.6", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.42", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json index 87c7d6b04c..3a77fbf006 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json @@ -1,35 +1,26 @@ { - "type": "process", - "name": "fdm_process_bbl_0.48_nozzle_0.8", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.48", - "initial_layer_print_height": "0.4", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "initial_layer_line_width": "0.82", - "sparse_infill_line_width": "0.82", - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5" -} + "type": "process", + "name": "fdm_process_bbl_0.48_nozzle_0.8", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.48", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json index 311925326a..3970ac5ac7 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json @@ -1,35 +1,26 @@ { - "type": "process", - "name": "fdm_process_bbl_0.56_nozzle_0.8", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_bbl_common", - "layer_height": "0.56", - "initial_layer_print_height": "0.4", - "wall_loops": "2", - "bottom_shell_layers": "3", - "top_shell_layers": "3", - "bridge_flow": "1", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "initial_layer_line_width": "0.82", - "sparse_infill_line_width": "0.82", - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "outer_wall_speed": "120", - "inner_wall_speed": "150", - "sparse_infill_speed": "100", - "internal_solid_infill_speed": "150", - "top_surface_speed": "150", - "gap_infill_speed": "50", - "bridge_speed": "30", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5" -} + "type": "process", + "name": "fdm_process_bbl_0.56_nozzle_0.8", + "inherits": "fdm_process_bbl_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.56", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_common.json b/resources/profiles/BBL/process/fdm_process_bbl_common.json index 99c86b59ac..223e2e9eb7 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_common.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json @@ -1,46 +1,28 @@ { "type": "process", "name": "fdm_process_bbl_common", + "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_common", - "adaptive_layer_height": "0", - "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", - "bridge_flow": "0.95", "bridge_speed": "50", - "brim_width": "5", "brim_object_gap": "0.1", - "compatible_printers": [], "compatible_printers_condition": "", - "print_sequence": "by layer", - "default_acceleration": "10000", - "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", "enable_arc_fitting": "1", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "120", "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.2", "initial_layer_speed": "30", "gap_infill_speed": "50", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", "sparse_infill_speed": "250", - "interface_shells": "0", "ironing_flow": "10%", "ironing_spacing": "0.15", "ironing_speed": "30", @@ -54,38 +36,22 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", - "inner_wall_line_width": "0.45", "inner_wall_speed": "150", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "0", "minimum_sparse_infill_area": "15", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "150", - "spiral_mode": "0", "initial_layer_infill_speed": "60", - "standby_temperature_delta": "-5", - "enable_support": "0", "resolution": "0.012", "support_type": "normal(auto)", "support_style": "default", - "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_expansion": "0", - "support_interface_speed": "80", - "support_base_pattern": "default", + "support_expansion": "0", "support_base_pattern_spacing": "2.5", "support_speed": "150", "support_threshold_angle": "30", @@ -93,9 +59,7 @@ "tree_support_branch_diameter": "2", "tree_support_branch_angle": "45", "tree_support_wall_count": "1", - "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", - "top_surface_line_width": "0.42", "top_surface_acceleration": "2000", "top_surface_speed": "200", "top_shell_layers": "3", @@ -104,7 +68,6 @@ "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "35", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "wall_generator": "classic" -} + "wall_generator": "classic", + "compatible_printers": [] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index 0177d23c6f..921718b995 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -8,7 +8,6 @@ "bridge_flow": "0.95", "bridge_speed": "25", "brim_width": "5", - "compatible_printers": [], "print_sequence": "by layer", "default_acceleration": "10000", "bridge_no_support": "0", @@ -67,5 +66,6 @@ "enable_prime_tower": "0", "prime_tower_width": "60", "xy_hole_compensation": "0", - "xy_contour_compensation": "0" -} + "xy_contour_compensation": "0", + "compatible_printers": [] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json index bec965dd75..e500c129a4 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json @@ -32,7 +32,7 @@ "support_base_pattern_spacing": "0.2", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_interface_top_layers": "3", "support_line_width": "0.38", "support_object_xy_distance": "60%", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json index 63e275a773..3f0b3b66dd 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json index 50be3581b8..51c392f4ef 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json index c4c7aeec6d..270e81e539 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json index 0f6db68bf7..8deeb7ae83 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json index 354015e75b..a1150ac0bd 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json index 05949d07d8..585cf8439d 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json index 29c1981379..29c96a6a53 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json index 1b6796aed2..7faa6972de 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json index 8a6a6da10b..2b548aeb92 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json index 8eed2e8e40..7c0d8d0b09 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json index c15aaff806..7ca6b11167 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json index 32d0fce753..642448d09b 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json index f7f7186d8d..4fa820d986 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json index b2bf944be2..cb723c32eb 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json index 8e52bfc97a..20ca822984 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json index 64051c990c..3595f55c24 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index 890f5f72a7..1e93a3e9d9 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -343,4 +343,4 @@ "sub_path": "machine/Elegoo Neptune 3 Max 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index f73ea1535c..2ea98c0db1 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -40,7 +40,6 @@ "name": "fdm_filament_asa", "sub_path": "filament/fdm_filament_asa.json" }, - { "name": "fdm_filament_pa", "sub_path": "filament/fdm_filament_pa.json" @@ -120,4 +119,4 @@ "sub_path": "machine/Prusa MINI 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json index b1218c297a..2ac9f9634f 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "25", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json index f935f9a5e4..9a1ad04948 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json index 7cd6980f4c..0e9cd5463b 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json index 9b3b983ba7..087b3da14d 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "25", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json index 4938f102d3..c756138966 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json index 62bc09add8..5d39f334de 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json index 3f33b97093..6bb6b47ec0 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "25", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json index bec3e09747..942332e769 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json index e499dff133..cdf47fe1e8 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json index 965d042d3b..141d984882 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "25", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json index 291c94e6c3..7fca25888b 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json index 0d36069f78..ff227d346a 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json index 308aee71ae..28c00e4ef4 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "25", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json index 78a8acd497..ac95c30e19 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json index 6d2eafdc30..80235d3572 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json @@ -75,7 +75,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_speed": "30", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json index 76606dbe18..9399abfdac 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -20,7 +20,7 @@ "gap_infill_speed": "150", "sparse_infill_speed": "300", "support_speed": "80", - "support_interface_speed": "100", + "support_interface_speed": "100%", "ironing_speed": "15", "bridge_speed": "25", "default_jerk": "9", diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json index d16eb8f422..a2af0e6939 100644 --- a/resources/profiles/Voron.json +++ b/resources/profiles/Voron.json @@ -183,4 +183,4 @@ "sub_path": "machine/Voron 0.1 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json index 0e593d8098..b003a6cee7 100644 --- a/resources/profiles/Voxelab.json +++ b/resources/profiles/Voxelab.json @@ -63,4 +63,4 @@ "sub_path": "machine/Voxelab Aquila X2 0.4 nozzle.json" } ] -} +} \ No newline at end of file diff --git a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json index df086208f6..9abeb20341 100644 --- a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json @@ -76,7 +76,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json index 22ff5eefe5..bac47669c2 100644 --- a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json @@ -76,7 +76,7 @@ "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "0.2", - "support_interface_speed": "100", + "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", "support_speed": "40", diff --git a/resources/profiles/blacklist.json b/resources/profiles/blacklist.json new file mode 100644 index 0000000000..e876cdca8b --- /dev/null +++ b/resources/profiles/blacklist.json @@ -0,0 +1,8 @@ +{ + "filament": [ + "GFSA03" + ], + "process": [ + "GP008" + ] +} \ No newline at end of file diff --git a/resources/profiles/check_unused_setting_id.py b/resources/profiles/check_unused_setting_id.py new file mode 100644 index 0000000000..14888a87b4 --- /dev/null +++ b/resources/profiles/check_unused_setting_id.py @@ -0,0 +1,54 @@ +import os +import json + +setting_id_used=set() +setting_id_all=set() +root_dir=os.path.dirname(os.path.abspath(__file__)) + + +def loadBlackList(): + with open(root_dir+'/blacklist.json') as file: + data=json.load(file) + + for key,val in data.items(): + for item in val: + setting_id_used.add(item) + setting_id_all.add(item) + +def traverse_files(path): + for file in os.listdir(path): + file_path = os.path.join(path, file) + if os.path.isdir(file_path): + traverse_files(file_path) # 递归遍历子文件夹 + elif file_path.endswith('.json'): + # 解析 JSON 文件并提取 setting_id 的值 + with open(file_path) as f: + data = json.load(f) + if 'setting_id' in data: + setting_id_all.add(data['setting_id']) + +def getUsedId(brand): + with open(root_dir+'/'+brand+'.json')as file: + data=json.load(file) + + key_list=["machine_model_list","machine_list","filament_list","process_list"] + + for key in key_list: + for elem in data[key]: + path=elem['sub_path'] + with open(root_dir+'/'+brand+'/'+path) as file: + file_data=json.load(file) + if 'setting_id' in file_data: + setting_id_used.add(file_data['setting_id']) + + +def getTotalId(brand): + traverse_files(root_dir+'/'+brand) + + +loadBlackList() +getUsedId('BBL') +getTotalId('BBL') + +print("unused setting_id :") +print(setting_id_all.difference(setting_id_used))