Merge pull request #5110 from pmjdebruijn/creality_filament_3

Creality Filament 3

resources/profiles/Creality.ini

@@ -359,20 +359,20 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
 inherits = *common*
 bed_temperature = 60
 fan_below_layer_time = 100
-filament_colour = #FF3232
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 15
 filament_type = PLA
 filament_density = 1.24
 filament_cost = 20
 first_layer_bed_temperature = 60
-first_layer_temperature = 205
+first_layer_temperature = 210
 fan_always_on = 1
 cooling = 1
 max_fan_speed = 100
 min_fan_speed = 100
 bridge_fan_speed = 100
 disable_fan_first_layers = 1
-temperature = 200
+temperature = 205
 
 [filament:*PET*]
 inherits = *common*
@@ -380,7 +380,7 @@ bed_temperature = 70
 cooling = 1
 disable_fan_first_layers = 3
 fan_below_layer_time = 20
-filament_colour = #FF8000
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 8
 filament_type = PETG
 filament_density = 1.27
@@ -399,7 +399,7 @@ bed_temperature = 100
 cooling = 0
 disable_fan_first_layers = 3
 fan_below_layer_time = 20
-filament_colour = #3A80CA
+filament_colour = #DDDDDD
 filament_max_volumetric_speed = 11
 filament_type = ABS
 filament_density = 1.04
@@ -434,10 +434,11 @@ filament_vendor = Generic
 inherits = *PLA*
 renamed_from = "Creality PLA @ENDER3"
 filament_vendor = Creality
-temperature = 205
+temperature = 200
-bed_temperature = 40
+bed_temperature = 50
-first_layer_temperature = 210
+first_layer_temperature = 205
-first_layer_bed_temperature = 40
+first_layer_bed_temperature = 50
+filament_colour = #42BDD8
 
 [filament:Creality PETG @CREALITY]
 inherits = *PET*
@@ -449,6 +450,7 @@ first_layer_temperature = 240
 first_layer_bed_temperature = 70
 max_fan_speed = 40
 min_fan_speed = 20
+filament_colour = #42BDD8
 
 [filament:Creality ABS @CREALITY]
 inherits = *ABS*
@@ -458,6 +460,7 @@ temperature = 240
 bed_temperature = 90
 first_layer_temperature = 240
 first_layer_bed_temperature = 90
+filament_colour = #42BDD8
 
 [filament:Prusament PLA @CREALITY]
 inherits = *PLA*
@@ -469,6 +472,7 @@ first_layer_temperature = 215
 first_layer_bed_temperature = 50
 filament_cost = 24.99
 filament_density = 1.24
+filament_colour = #F94D0C
 
 [filament:Prusament PETG @CREALITY]
 inherits = *PET*
@@ -480,6 +484,18 @@ first_layer_temperature = 245
 first_layer_bed_temperature = 70
 filament_cost = 24.99
 filament_density = 1.27
+filament_colour = #F94D0C
+
+[filament:AzureFilm PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = AzureFilm
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 19.97
+filament_density = 1.24
+filament_colour = #006AA6
 
 [filament:Devil Design PLA @CREALITY]
 inherits = *PLA*
@@ -490,6 +506,7 @@ first_layer_temperature = 215
 first_layer_bed_temperature = 60
 filament_cost = 19.00
 filament_density = 1.24
+filament_colour = #FF0000
 
 [filament:Extrudr PLA NX2 @CREALITY]
 inherits = *PLA*
@@ -500,6 +517,7 @@ first_layer_temperature = 205
 first_layer_bed_temperature = 60
 filament_cost = 23.63
 filament_density = 1.3
+filament_colour = #3C4547
 
 [filament:Real Filament PLA @CREALITY]
 inherits = *PLA*
@@ -510,6 +528,7 @@ first_layer_temperature = 200
 first_layer_bed_temperature = 60
 filament_cost = 24.99
 filament_density = 1.24
+filament_colour = #007ABF
 
 [filament:Velleman PLA @CREALITY]
 inherits = *PLA*
@@ -520,6 +539,7 @@ first_layer_temperature = 205
 first_layer_bed_temperature = 60
 filament_cost = 27.99
 filament_density = 1.24
+filament_colour = #7EA60D
 
 [filament:3DJAKE ecoPLA @CREALITY]
 inherits = *PLA*
@@ -530,6 +550,7 @@ first_layer_temperature = 205
 first_layer_bed_temperature = 60
 filament_cost = 21.99
 filament_density = 1.24
+filament_colour = #125467
 
 [filament:123-3D Jupiter PLA @CREALITY]
 inherits = *PLA*
@@ -540,6 +561,7 @@ first_layer_temperature = 205
 first_layer_bed_temperature = 60
 filament_cost = 19.50
 filament_density = 1.24
+filament_colour = #FFE200
 
 # Common printer preset
 [printer:*common*]