FIX: translate for error message when send calib

Jira: XXXX Change-Id: Id4d7dc5adc8e070d161acd2440dc51b6fbb41324
2025-07-07 23:17:35 -06:00 · 2023-09-21 09:33:32 +08:00 · 2023-09-21 09:33:32 +08:00 · 8eb006c7bf
commit 8eb006c7bf
parent ffe0cfd876
27 changed files with 672 additions and 609 deletions
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -1920,13 +1920,13 @@ msgstr ""
 msgid "Max volumetric speed"
 msgstr ""
-msgid "℃"
+msgid "\\u2103"
 msgstr ""
 msgid "Bed temperature"
 msgstr ""
-msgid "mm³"
+msgid "mm\\u00B3"
 msgstr ""
 msgid "Start calibration"
@ -2511,14 +2511,20 @@ msgstr ""
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4432,6 +4438,11 @@ msgstr ""
 msgid "Project downloaded %d%%"
 msgstr ""
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr ""
@ -5266,8 +5277,8 @@ msgstr ""
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
@ -7203,6 +7214,9 @@ msgstr ""
 msgid "Minimal purge on wipe tower"
 msgstr ""
 msgid "mm³"
 msgstr ""
 msgid "Filament load time"
 msgstr ""
@ -9057,7 +9071,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
-msgid "The failed test result has been dropped."
+msgid "The failed test result has been droped."
 msgstr ""
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@ -9181,7 +9195,7 @@ msgstr ""
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be dropped."
+"failed test result would be droped."
 msgstr ""
 msgid ""
@ -9262,9 +9276,6 @@ msgstr ""
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr ""
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr ""
@ -9285,10 +9296,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
-msgid "- ℃"
+msgid "- \\u2103"
 msgstr ""
-msgid " ℃"
+msgid " \\u2103"
 msgstr ""
 msgid "Plate Type"
@ -9315,6 +9326,9 @@ msgstr ""
 msgid "Extra info"
 msgstr ""
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr ""
@ -9355,6 +9369,9 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 msgid "mm\\u00B3/s"
 msgstr ""
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
@ -9458,7 +9475,7 @@ msgstr ""
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
@ -9473,7 +9490,7 @@ msgstr ""
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
@ -9602,6 +9619,17 @@ msgstr ""
 msgid "Delete input"
 msgstr ""
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?"
 msgstr ""
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -2040,14 +2040,14 @@ msgstr "Druckbetttemperatur"
 msgid "Max volumetric speed"
 msgstr "Maximale Volumengeschwindigkeit"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Druckbetttemperatur"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Starten"
@ -2757,14 +2757,20 @@ msgstr "Update fehlgeschlagen."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4788,6 +4794,11 @@ msgstr "Projekt wird heruntergeladen..."
 msgid "Project downloaded %d%%"
 msgstr "Projekt heruntergeladen %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "Die ausgewählte Datei"
@ -5702,8 +5713,8 @@ msgstr "Allgemeine Geschäftsbedingungen"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Vielen Dank für den Kauf eines Bambu Lab Geräts. Bevor Sie Ihr Bambu Lab "
@ -7966,6 +7977,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale Wischmenge im Wischturm"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Ladedauer des Filaments"
@ -9960,8 +9974,8 @@ msgid ""
 "No layers were detected. You might want to repair your STL file(s) or check "
 "their size or thickness and retry.\n"
 msgstr ""
-"Es wurden keine Schichten erkannt. Möglicherweise möchten Sie Ihre STL-"
+"Es wurden keine Schichten erkannt. Möglicherweise möchten Sie Ihre STL-Datei"
-"Datei(en) reparieren oder ihre Größe oder Dicke überprüfen und es erneut "
+"(en) reparieren oder ihre Größe oder Dicke überprüfen und es erneut "
 "versuchen.\n"
 msgid ""
@ -10444,9 +10458,6 @@ msgstr ""
 "Bitte geben Sie einen gültigen Wert ein (0 <= Max. Volumengeschwindigkeit <= "
 "60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Kalibrierungstyp"
@ -10469,11 +10480,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Druckparameter"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Druckbetttyp"
@ -10503,6 +10514,9 @@ msgstr "Fehlerbeschreibung"
 msgid "Extra info"
 msgstr "Zusatzinformation"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Methode"
@ -10546,6 +10560,9 @@ msgstr "Von Volumengeschwindigkeit"
 msgid "To Volumetric Speed"
 msgstr "Bis Volumengeschwindigkeit"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Ergebnis der Flussdynamik-Kalibrierung"
@ -10657,9 +10674,12 @@ msgstr "Schritt:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Bitte geben Sie gültige Werte ein:\n"
 "Start > 0 \\Schritt >= 0\n"
 "End > Start + Schritt)"
 msgid "VFA test"
 msgstr "VFA Test"
@ -10672,9 +10692,12 @@ msgstr "Endgeschwindigkeit:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Bitte geben Sie gültige Werte ein:\n"
 "Start > 0 \\Schritt >= 0\n"
 "End > Start + Schritt)"
 msgid "Start retraction length: "
 msgstr "Start Rückzugslänge:"
@ -10805,6 +10828,17 @@ msgstr "Subtrahieren mit"
 msgid "Delete input"
 msgstr "Eingabe löschen"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -11078,39 +11112,6 @@ msgstr ""
 "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandlinien und "
 "eine höhere Dichte der Füllung verbessern können?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Bitte geben Sie gültige Werte ein:\n"
 #~ "Start > 0 \\Schritt >= 0\n"
 #~ "End > Start + Schritt)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Bitte geben Sie gültige Werte ein:\n"
 #~ "Start > 0 \\Schritt >= 0\n"
 #~ "End > Start + Schritt)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -1989,14 +1989,14 @@ msgstr "Bed Temperature"
 msgid "Max volumetric speed"
 msgstr "Max volumetric speed"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Bed temperature"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Start"
@ -2682,14 +2682,20 @@ msgstr "Update failed."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4679,6 +4685,11 @@ msgstr "downloading project ..."
 msgid "Project downloaded %d%%"
 msgstr "Project downloaded %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "The selected file"
@ -5563,8 +5574,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@ -7757,6 +7768,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge on wipe tower"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Filament load time"
@ -10152,9 +10166,6 @@ msgstr "Please choose the block with the smoothest top surface."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Calibration Type"
@ -10177,11 +10188,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Plate Type"
@ -10211,6 +10222,9 @@ msgstr "Error desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Method"
@ -10251,6 +10265,9 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
@ -10362,9 +10379,12 @@ msgstr "step:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10377,9 +10397,12 @@ msgstr "End speed:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@ -10506,6 +10529,17 @@ msgstr "Subtract with"
 msgid "Delete input"
 msgstr "Delete input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10773,39 +10807,6 @@ msgstr ""
 "Did you know that you can use more wall loops and higher sparse infill "
 "density to improve the strength of the model?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -2037,14 +2037,14 @@ msgstr "Temperatura de la base"
 msgid "Max volumetric speed"
 msgstr "Velocidad volumétrica máxima"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\ u2103"
 msgid "Bed temperature"
 msgstr "Temperatura de la base"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\ u00b3"
 msgid "Start calibration"
 msgstr "Iniciar"
@ -2748,14 +2748,20 @@ msgstr "Actualización fallida."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4765,6 +4771,11 @@ msgstr "descargando proyecto..."
 msgid "Project downloaded %d%%"
 msgstr "Proyecto %d%% descargado"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "El archivo seleccionado"
@ -5670,8 +5681,8 @@ msgstr "Términos y condiciones"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@ -7923,6 +7934,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purga mínima en la torre de limpieza"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Tiempo de carga de filamento"
@ -10363,9 +10377,6 @@ msgstr "Please choose the block with the smoothest top surface."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Calibration Type"
@ -10388,11 +10399,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Tipo de cama"
@ -10422,6 +10433,9 @@ msgstr "Error desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Method"
@ -10462,6 +10476,9 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
@ -10573,9 +10590,12 @@ msgstr "step:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10588,9 +10608,12 @@ msgstr "End speed:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@ -10717,6 +10740,17 @@ msgstr "Subtract with"
 msgid "Delete input"
 msgstr "Delete input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10985,39 +11019,6 @@ msgstr ""
 "¿Sabía que puede utilizar más bucles de pared y una densidad de relleno "
 "dispersa más alta para mejorar la resistencia del modelo?"
 #~ msgid "\\u2103"
 #~ msgstr "\\ u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\ u00b3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Placa de Ingenieria Bambu"
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -2036,14 +2036,14 @@ msgstr "Température du lit"
 msgid "Max volumetric speed"
 msgstr "Vitesse volumétrique maximale"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Température du plateau"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Démarrer"
@ -2739,14 +2739,20 @@ msgstr "Mise à jour a échoué."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4761,6 +4767,11 @@ msgstr "téléchargement du projet..."
 msgid "Project downloaded %d%%"
 msgstr "Projet téléchargé à %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "Le fichier sélectionné"
@ -5683,8 +5694,8 @@ msgstr "Termes et conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Nous vous remercions d'avoir acheté un produit Bambu Lab. Avant d'utiliser "
@ -7968,6 +7979,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purge minimale sur la tour de nettoyage"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Temps de chargement du filament"
@ -10452,9 +10466,6 @@ msgstr "Choisissez le bloc dont la surface supérieure est la plus lisse."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Entrez une valeur valide (0 <= Vitesse Volumétrique Max <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Calibration Type"
@ -10477,11 +10488,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Type de plaque"
@ -10511,6 +10522,9 @@ msgstr "Error desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Method"
@ -10551,6 +10565,9 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
@ -10662,9 +10679,12 @@ msgstr "step:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10677,9 +10697,12 @@ msgstr "End speed:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@ -10806,6 +10829,17 @@ msgstr "Subtract with"
 msgid "Delete input"
 msgstr "Delete input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -11082,39 +11116,6 @@ msgstr ""
 "Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une "
 "densité de remplissage plus élevée pour améliorer la résistance du modèle ?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Plaque Engineering Bambu"
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -2025,14 +2025,14 @@ msgstr "Asztalhőmérséklet"
 msgid "Max volumetric speed"
 msgstr "Max. volumetrikus sebesség"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Asztalhőmérséklet"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Start"
@ -2722,14 +2722,20 @@ msgstr "A frissítés sikertelen."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4729,6 +4735,11 @@ msgstr "projekt letöltése ..."
 msgid "Project downloaded %d%%"
 msgstr "Projekt letöltve %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "A kiválasztott fájl"
@ -5624,8 +5635,8 @@ msgstr "Felhasználási feltételek"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Köszönjük, hogy Bambu Lab készüléket vásároltál. Mielőtt használnád az új "
@ -7862,6 +7873,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimális tisztítás a törlőtoronyban"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Filament betöltési idő"
@ -10299,9 +10313,6 @@ msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr ""
 "Kérjük, adj meg egy érvényes értéket (0 <= Max. volumetrikus sebesség <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Kalibrálás típusa"
@ -10324,11 +10335,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Nyomtatási paraméterek"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Tálcatípus"
@ -10358,6 +10369,9 @@ msgstr "Hibaleírás"
 msgid "Extra info"
 msgstr "Extra infó"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Módszer"
@ -10398,6 +10412,9 @@ msgstr "Ettől a volumetrikus sebességtől"
 msgid "To Volumetric Speed"
 msgstr "Eddig a volumetrikus sebességig"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Áramlásdinamikai kalibrációs eredmény"
@ -10509,9 +10526,12 @@ msgstr "lépcső:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Kérjük, adj meg érvényes értékeket:\n"
 "\\lépcső>= 0\n"
 "befejező > kezdő + lépcső)"
 msgid "VFA test"
 msgstr "VFA teszt"
@ -10524,9 +10544,12 @@ msgstr "Befejező sebesség:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Kérjük, adj meg érvényes értékeket:\n"
 "kezdő > 0 \\lépcső >= 0\n"
 "befejező > kezdő + lépcső)"
 msgid "Start retraction length: "
 msgstr "Kezdő visszahúzás hossza:"
@ -10653,6 +10676,17 @@ msgstr "Kivonás ezzel"
 msgid "Delete input"
 msgstr "Bemenet törlése"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10921,39 +10955,6 @@ msgstr ""
 "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a "
 "modell szilárdságát?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Kérjük, adj meg érvényes értékeket:\n"
 #~ "\\lépcső>= 0\n"
 #~ "befejező > kezdő + lépcső)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Kérjük, adj meg érvényes értékeket:\n"
 #~ "kezdő > 0 \\lépcső >= 0\n"
 #~ "befejező > kezdő + lépcső)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -2022,14 +2022,14 @@ msgstr "Temperatura piano"
 msgid "Max volumetric speed"
 msgstr "Massima velocità volumetrica"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Temperatura piano"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Calibra"
@ -2729,14 +2729,20 @@ msgstr "Aggiornamento fallito"
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4741,6 +4747,11 @@ msgstr "Download progetto..."
 msgid "Project downloaded %d%%"
 msgstr "Progetto scaricato %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "Il file selezionato"
@ -5640,8 +5651,8 @@ msgstr "Termini e condizioni"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Grazie per aver acquistato un dispositivo Bambu Lab. Prima di utilizzare il "
@ -7902,6 +7913,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Spurgo minimo sulla torre di pulitura"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Durata caricamento filamento"
@ -10368,9 +10382,6 @@ msgstr "Scegli il blocco con la superficie superiore più liscia."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Inserisci un valore valido (0 <= Velocità volumetrica massima <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Tipo di calibrazione"
@ -10393,11 +10404,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Parametri di stampa"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Tipo di piatto"
@ -10427,6 +10438,9 @@ msgstr "Errore desc"
 msgid "Extra info"
 msgstr "Informazioni extra"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Metodo"
@ -10470,6 +10484,9 @@ msgstr "Dalla velocità volumetrica"
 msgid "To Volumetric Speed"
 msgstr "Alla velocità volumetrica"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Risultato Calibrazione Flusso Dinamica"
@ -10581,9 +10598,12 @@ msgstr "passo:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Inserisci valori validi:\n"
 "avvio > 0\\ step >= 0\n"
 "fine > inizio + passo)"
 msgid "VFA test"
 msgstr "Test VFA"
@ -10596,9 +10616,12 @@ msgstr "Velocità finale:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Inserisci valori validi:\n"
 "avvio > 0\\ step >= 0\n"
 "fine > inizio + passo)"
 msgid "Start retraction length: "
 msgstr "Lunghezza iniziale retrazione:"
@ -10727,6 +10750,17 @@ msgstr "Sottrai con"
 msgid "Delete input"
 msgstr "Elimina input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10996,39 +11030,6 @@ msgstr ""
 "Sapevate che è possibile utilizzare un maggior numero di anelli a parete e "
 "una maggiore densità riempimento per migliorare la resistenza del modello?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Inserisci valori validi:\n"
 #~ "avvio > 0\\ step >= 0\n"
 #~ "fine > inizio + passo)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Inserisci valori validi:\n"
 #~ "avvio > 0\\ step >= 0\n"
 #~ "fine > inizio + passo)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -1968,14 +1968,14 @@ msgstr "ベッド温度"
 msgid "Max volumetric speed"
 msgstr "最大体積速度"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Bed temperature"
 msgstr "ベッド温度"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mmu00B3"
 msgid "Start calibration"
 msgstr "開始"
@ -2621,14 +2621,20 @@ msgstr "更新が失敗しました。"
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4595,6 +4601,11 @@ msgstr "プロジェクトをダウンロード中"
 msgid "Project downloaded %d%%"
 msgstr "プロジェクトをダウンロード %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "選択したファイル"
@ -5456,8 +5467,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@ -7555,6 +7566,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "プライムタワー上最小フラッシュ量"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "フィラメントロード時間"
@ -9861,9 +9875,6 @@ msgstr "Please choose the block with the smoothest top surface."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Calibration Type"
@ -9886,11 +9897,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Plate Type"
@ -9920,6 +9931,9 @@ msgstr "Error desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Method"
@ -9960,6 +9974,9 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
@ -10071,9 +10088,12 @@ msgstr "step:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10086,9 +10106,12 @@ msgstr "End speed:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@ -10215,6 +10238,17 @@ msgstr "Subtract with"
 msgid "Delete input"
 msgstr "Delete input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10454,39 +10488,6 @@ msgstr ""
 "強度の向上\n"
 "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。"
 #~ msgid "\\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mmu00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu エンジニアリングプレート"
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -1977,14 +1977,14 @@ msgstr "베드 온도"
 msgid "Max volumetric speed"
 msgstr "최대 체적 속도"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "베드 온도"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "시작"
@ -2655,14 +2655,20 @@ msgstr "업데이트 실패"
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4645,6 +4651,11 @@ msgstr "프로젝트 다운로드 중..."
 msgid "Project downloaded %d%%"
 msgstr "프로젝트 다운로드 %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "선택한 파일"
@ -5516,8 +5527,8 @@ msgstr "이용약관"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Bambu Lab 기기를 구매해 주셔서 감사합니다. Bambu Lab 기기를 사용하기 전에 이"
@ -7656,6 +7667,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "와이프타워에 최소 짜내기"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "필라멘트 로드 시간"
@ -9995,9 +10009,6 @@ msgstr "Please choose the block with the smoothest top surface."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Calibration Type"
@ -10020,11 +10031,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "플레이트 유형"
@ -10054,6 +10065,9 @@ msgstr "Error desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Method"
@ -10094,6 +10108,9 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
@ -10205,9 +10222,12 @@ msgstr ""
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10220,9 +10240,12 @@ msgstr "End speed:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Please input valid values:\n"
 "start > 0 \\step >= 0\n"
 "end > start + step)"
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@ -10349,6 +10372,17 @@ msgstr "Subtract with"
 msgid "Delete input"
 msgstr "Delete input"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10613,39 +10647,6 @@ msgstr ""
 "더 많은 벽 루프와 더 높은 내부채움 밀도를 사용하여 모델의 강도를 높일 수 있다"
 "는 사실을 알고 계셨습니까?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/list.txt
+++ b/bbl/i18n/list.txt
@ -145,3 +145,4 @@ src/slic3r/GUI/BonjourDialog.cpp
 src/slic3r/GUI/calib_dlg.cpp
 src/slic3r/GUI/PrintHostDialogs.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
 src/slic3r/Utils/CalibUtils.cpp
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -2040,14 +2040,14 @@ msgstr "Bed Temperatuur"
 msgid "Max volumetric speed"
 msgstr "Maximale volumetrische snelheid"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\ u2103"
 msgid "Bed temperature"
 msgstr "Printbed temperatuur"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Starten"
@ -2744,14 +2744,20 @@ msgstr "Updaten mislukt."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4772,6 +4778,11 @@ msgstr "project downloaden..."
 msgid "Project downloaded %d%%"
 msgstr "Project %d%% gedownload"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "Het geselecteerde bestand"
@ -5683,8 +5694,8 @@ msgstr "Algemene voorwaarden"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Bedankt voor de aanschaf van een Bambu Lab-apparaat. Lees de algemene "
@ -7949,6 +7960,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale filament reiniging op de wipe tower"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Filament laadt tijd"
@ -10420,9 +10434,6 @@ msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr ""
 "Voer een geldige waarde in (0 <= maximale volumetrische snelheid <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Kalibratietype"
@ -10445,11 +10456,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Afdrukparameters"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Bedtype"
@ -10479,6 +10490,9 @@ msgstr "Fout beschrijving"
 msgid "Extra info"
 msgstr "Extra informatie"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Methode"
@ -10520,6 +10534,9 @@ msgstr "Van Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "Naar volumetrische snelheid"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Kalibratieresultaat van Flow Dynamics"
@ -10631,9 +10648,12 @@ msgstr "stap:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Voer geldige waarden in:\n"
 "start > 0 \\step >= 0\n"
 "einde > begin + stap)"
 msgid "VFA test"
 msgstr "VFA-test"
@ -10646,9 +10666,12 @@ msgstr "Eindsnelheid:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Voer geldige waarden in:\n"
 "start > 0 \\step >= 0\n"
 "einde > begin + stap)"
 msgid "Start retraction length: "
 msgstr "Begin terugtreklengte:"
@ -10776,6 +10799,17 @@ msgstr "Aftrekken met"
 msgid "Delete input"
 msgstr "Invoer verwijderen"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -11044,39 +11078,6 @@ msgstr ""
 "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt "
 "gebruiken om de sterkte van het model te verbeteren?"
 #~ msgid "\\u2103"
 #~ msgstr "\\ u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Voer geldige waarden in:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "einde > begin + stap)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Voer geldige waarden in:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "einde > begin + stap)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering (technische) plate"
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@ -2004,14 +2004,14 @@ msgstr "Byggplattans temperatur"
 msgid "Max volumetric speed"
 msgstr "Max volymetrisk hastighet"
-msgid "℃"
+msgid "\\u2103"
-msgstr ""
+msgstr "\\u2103"
 msgid "Bed temperature"
 msgstr "Byggplattans temperatur"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr "mm\\u00B3"
 msgid "Start calibration"
 msgstr "Starta"
@ -2699,14 +2699,20 @@ msgstr "Uppdatering misslyckades."
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 msgid "Failed to start printing job"
@ -4701,6 +4707,11 @@ msgstr "laddar ner projekt ..."
 msgid "Project downloaded %d%%"
 msgstr "Projektet har laddats ned %d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
 msgid "The selected file"
 msgstr "Den valda filen"
@ -5586,8 +5597,8 @@ msgstr "Villkor och bestämmelser"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu Lab "
@ -7778,6 +7789,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge på wipe torn"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "Inmatningstid för filament"
@ -9039,8 +9053,8 @@ msgid ""
 "interface is Concentric"
 msgstr ""
 "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt "
-"(material) support gränssnittet är Räta medan standardmönstret för "
+"(material) support gränssnittet är Räta medan standardmönstret för lösligt"
-"lösligt(material) stödgränssnittet är koncentriskt"
+"(material) stödgränssnittet är koncentriskt"
 msgid "Rectilinear Interlaced"
 msgstr "Rätlinjig sammanflätning"
@ -10189,9 +10203,6 @@ msgstr "Välj det block som har den jämnaste toppytan."
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "Ange ett giltigt värde (0 <= Max volym hastighet <= 60)"
 msgid "Pattern"
 msgstr ""
 msgid "Calibration Type"
 msgstr "Typ av kalibrering"
@ -10214,11 +10225,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Parametrar för utskrift"
-msgid "- ℃"
+msgid "- \\u2103"
-msgstr ""
+msgstr "- u2103"
-msgid " ℃"
+msgid " \\u2103"
-msgstr ""
+msgstr "u2103"
 msgid "Plate Type"
 msgstr "Typ av byggplatta"
@ -10248,6 +10259,9 @@ msgstr "Fel desc"
 msgid "Extra info"
 msgstr "Extra info"
 msgid "Pattern"
 msgstr ""
 msgid "Method"
 msgstr "Metod"
@ -10288,6 +10302,9 @@ msgstr "Från volymetrisk hastighet"
 msgid "To Volumetric Speed"
 msgstr "Till volymetrisk hastighet"
 msgid "mm\\u00B3/s"
 msgstr "mm\\u00B3/s"
 msgid "Flow Dynamics Calibration Result"
 msgstr "Resultat för kalibrering av flödesdynamik"
@ -10399,9 +10416,12 @@ msgstr "steg:"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Vänligen ange giltiga värden:\n"
 "start > 0 \\steg >= 0\n"
 "slut > start + steg)"
 msgid "VFA test"
 msgstr "VFA test"
@ -10414,9 +10434,12 @@ msgstr "Sluthastighet:"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "Vänligen ange giltiga värden:\n"
 "start > 0 \\steg >= 0\n"
 "slut > start + steg)"
 msgid "Start retraction length: "
 msgstr "Starta retractions längd:"
@ -10544,6 +10567,17 @@ msgstr "Subtrahera med"
 msgid "Delete input"
 msgstr "Ta bort inmatning"
 msgid "The start, end or step is not valid value."
 msgstr ""
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr ""
 msgid "Need select printer"
 msgstr ""
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10811,39 +10845,6 @@ msgstr ""
 "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet "
 "för att förbättra modellens styrka?"
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"
 #~ msgid "mm\\u00B3"
 #~ msgstr "mm\\u00B3"
 #~ msgid "- \\u2103"
 #~ msgstr "- u2103"
 #~ msgid " \\u2103"
 #~ msgstr "u2103"
 #~ msgid "mm\\u00B3/s"
 #~ msgstr "mm\\u00B3/s"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 0 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Vänligen ange giltiga värden:\n"
 #~ "start > 0 \\steg >= 0\n"
 #~ "slut > start + steg)"
 #~ msgid ""
 #~ "Please input valid values:\n"
 #~ "start > 10 \\step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "Vänligen ange giltiga värden:\n"
 #~ "start > 0 \\steg >= 0\n"
 #~ "slut > start + steg)"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-19 14:52+0800\n"
+"POT-Creation-Date: 2023-09-21 10:27+0800\n"
 "PO-Revision-Date: 2023-09-18 09:18+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@ -1942,14 +1942,14 @@ msgstr "热床温度"
 msgid "Max volumetric speed"
 msgstr "最大体积速度"
-msgid "℃"
+msgid "\\u2103"
 msgstr ""
 msgid "Bed temperature"
 msgstr "床温"
-msgid "mm³"
+msgid "mm\\u00B3"
-msgstr "mm³"
+msgstr ""
 msgid "Start calibration"
 msgstr "开始"
@ -2592,8 +2592,8 @@ msgstr "更新失败。"
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"TPU) is not allowed to be loaded."
+"PETG/TPU) is not allowed to be loaded."
 msgstr ""
 "当前打印机腔内温度或者目标腔内温度超过了45度，为了避免挤出机堵塞，不允许加载"
 "低温打印丝（PLA/PETG/TPU)"
@ -2601,11 +2601,19 @@ msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45℃."
+"above 45\\u2103."
 msgstr ""
 "挤出机内装入低温长丝(PLA/PETG/TPU)。为了避免挤出机堵塞，不允许将打印机腔内温"
 "度设置在45度以上。"
 msgid ""
 "When you set the chamber temperature below 40\\u2103, the chamber "
 "temperature control will not be activated. And the target chamber "
 "temperature will automatically be set to 0\\u2103."
 msgstr ""
 "当您设置的腔温低于40\\u2103时，腔温控制将不会启动。并且目标腔温将自动设置为"
 "0\\u2103"
 msgid "Failed to start printing job"
 msgstr "发起打印任务失败"
@ -4551,6 +4559,11 @@ msgstr "项目下载中..."
 msgid "Project downloaded %d%%"
 msgstr "项目已下载%d%%"
 msgid ""
 "Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr "导入到Bambu Studio失败，请下载文件并手动导入。"
 msgid "The selected file"
 msgstr "已选择的文件"
@ -5402,8 +5415,8 @@ msgstr "用户使用协议"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "感谢您购买Bambu Lab设备，使用Bambu Lab设备前，请阅读一下条款，单击同意使用您"
@ -7437,6 +7450,9 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "擦拭塔上的最小清理量"
 msgid "mm³"
 msgstr "mm³"
 msgid "Filament load time"
 msgstr "加载耗材丝的时间"
@ -9658,9 +9674,6 @@ msgstr "请选择顶部表面最光滑的块。"
 msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
 msgstr "请输入一个有效值（0<=最大容积速度<=60）"
 msgid "Pattern"
 msgstr "图案"
 msgid "Calibration Type"
 msgstr "校准类型"
@ -9681,10 +9694,10 @@ msgstr "将打印一份测试模型。在校准之前，请清理打印平台并
 msgid "Printing Parameters"
 msgstr "打印参数"
-msgid "- ℃"
+msgid "- \\u2103"
 msgstr ""
-msgid " ℃"
+msgid " \\u2103"
 msgstr ""
 msgid "Plate Type"
@ -9714,6 +9727,9 @@ msgstr "错误描述"
 msgid "Extra info"
 msgstr "额外信息"
 msgid "Pattern"
 msgstr "图案"
 msgid "Method"
 msgstr "模式"
@ -9754,6 +9770,9 @@ msgstr "从体积速度"
 msgid "To Volumetric Speed"
 msgstr "至体积速度"
 msgid "mm\\u00B3/s"
 msgstr ""
 msgid "Flow Dynamics Calibration Result"
 msgstr "动态流量校准结果"
@ -9865,11 +9884,11 @@ msgstr "值步长"
 msgid ""
 "Please input valid values:\n"
-"start > 0 step >= 0\n"
+"start > 0 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "请输入有效值:\n"
-"起始值 > 0，值步长 >= 0\n"
+"起始值 > 0 \\值步长 >= 0\n"
 "结束值 > 起始值 + 值步长)"
 msgid "VFA test"
@ -9883,11 +9902,11 @@ msgstr "结束速度"
 msgid ""
 "Please input valid values:\n"
-"start > 10 step >= 0\n"
+"start > 10 \\step >= 0\n"
 "end > start + step)"
 msgstr ""
 "请输入有效值:\n"
-"起始值 > 0，值步长 >= 0\n"
+"起始值 > 0 \\值步长 >= 0\n"
 "结束值 > 起始值 + 值步长)"
 msgid "Start retraction length: "
@ -10015,6 +10034,17 @@ msgstr "与之相减"
 msgid "Delete input"
 msgstr "删除输入"
 msgid "The start, end or step is not valid value."
 msgstr "起始、结束或者步长输入值无效"
 msgid ""
 "Unable to calibrate: maybe because the set calibration value range is too "
 "large, or the step is too small"
 msgstr "无法标定：可能是标定值范围过大，或者是补偿过小"
 msgid "Need select printer"
 msgstr "需要选择打印机"
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@ -10260,13 +10290,10 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
 #~ msgid "Rating"
 #~ msgstr "评分"
 #~ msgid ""
 #~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ "TPU) is not allowed to be loaded."
 #~ msgstr ""
 #~ "当前打印机腔内温度或者目标腔内温度超过了45度，为了避免挤出机堵塞，不允许加"
 #~ "载低温打印丝（PLA/PETG/TPU)"
@ -10274,29 +10301,32 @@ msgstr ""
 #~ msgid ""
 #~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
 #~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
+#~ "temperature above 45℃."
 #~ msgstr ""
 #~ "挤出机内装入低温长丝(PLA/PETG/TPU)。为了避免挤出机堵塞，不允许将打印机腔内"
 #~ "温度设置在45度以上。"
 #~ msgid ""
 #~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
+#~ "start > 0 step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "请输入有效值:\n"
-#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "起始值 > 0，值步长 >= 0\n"
 #~ "结束值 > 起始值 + 值步长)"
 #~ msgid ""
 #~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
+#~ "start > 10 step >= 0\n"
 #~ "end > start + step)"
 #~ msgstr ""
 #~ "请输入有效值:\n"
-#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "起始值 > 0，值步长 >= 0\n"
 #~ "结束值 > 起始值 + 值步长)"
 #~ msgid "Rating"
 #~ msgstr "评分"
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "工程材料打印板"
--- a/resources/i18n/de/BambuStudio.mo
+++ b/resources/i18n/de/BambuStudio.mo
--- a/resources/i18n/en/BambuStudio.mo
+++ b/resources/i18n/en/BambuStudio.mo
--- a/resources/i18n/es/BambuStudio.mo
+++ b/resources/i18n/es/BambuStudio.mo
--- a/resources/i18n/fr/BambuStudio.mo
+++ b/resources/i18n/fr/BambuStudio.mo
--- a/resources/i18n/hu/BambuStudio.mo
+++ b/resources/i18n/hu/BambuStudio.mo
--- a/resources/i18n/it/BambuStudio.mo
+++ b/resources/i18n/it/BambuStudio.mo
--- a/resources/i18n/ja/BambuStudio.mo
+++ b/resources/i18n/ja/BambuStudio.mo
--- a/resources/i18n/ko/BambuStudio.mo
+++ b/resources/i18n/ko/BambuStudio.mo
--- a/resources/i18n/nl/BambuStudio.mo
+++ b/resources/i18n/nl/BambuStudio.mo
--- a/resources/i18n/sv/BambuStudio.mo
+++ b/resources/i18n/sv/BambuStudio.mo
--- a/resources/i18n/zh_cn/BambuStudio.mo
+++ b/resources/i18n/zh_cn/BambuStudio.mo
--- a/src/slic3r/GUI/CalibrationWizard.cpp
+++ b/src/slic3r/GUI/CalibrationWizard.cpp
@ -553,7 +553,7 @@ void PressureAdvanceWizard::on_cali_start()
        return;
    }
-    std::string error_message;
+    //std::string error_message;
    wxString wx_err_string;
    if (m_cali_method == CalibrationMethod::CALI_METHOD_AUTO && curr_obj->get_printer_series() == PrinterSeries::SERIES_X1) {
        X1CCalibInfos calib_infos;
@ -577,8 +577,7 @@ void PressureAdvanceWizard::on_cali_start()
            calib_info.max_volumetric_speed = max_volumetric_speed;
            calib_infos.calib_datas.push_back(calib_info);
        }
-        CalibUtils::calib_PA(calib_infos, 0, error_message);    // mode = 0 for auto
+        CalibUtils::calib_PA(calib_infos, 0, wx_err_string); // mode = 0 for auto
        wx_err_string = from_u8(error_message);
        if (!wx_err_string.empty()) {
            MessageDialog msg_dlg(nullptr, wx_err_string, wxEmptyString, wxICON_WARNING | wxOK);
@ -640,8 +639,7 @@ void PressureAdvanceWizard::on_cali_start()
            cali_page->set_pa_cali_image(int(pa_cali_method));
            curr_obj->manual_pa_cali_method = pa_cali_method;
-            CalibUtils::calib_generic_PA(calib_info, error_message);
+            CalibUtils::calib_generic_PA(calib_info, wx_err_string);
            wx_err_string = from_u8(error_message);
            if (!wx_err_string.empty()) {
                MessageDialog msg_dlg(nullptr, wx_err_string, wxEmptyString, wxICON_WARNING | wxOK);
@ -996,9 +994,7 @@ void FlowRateWizard::on_cali_start(CaliPresetStage stage, float cali_value, Flow
            calib_info.filament_prest = temp_filament_preset;
            if (cali_stage > 0) {
-                std::string error_message;
+                CalibUtils::calib_flowrate(cali_stage, calib_info, wx_err_string);
                CalibUtils::calib_flowrate(cali_stage, calib_info, error_message);
                wx_err_string = from_u8(error_message);
            }
            else {
                wx_err_string = _L("Internal Error") + wxString(": Invalid calibration stage");
@ -1342,9 +1338,7 @@ void MaxVolumetricSpeedWizard::on_cali_start()
    calib_info.print_prest   = preset_page->get_print_preset();
    wxString wx_err_string;
-    std::string error_message;
+    CalibUtils::calib_max_vol_speed(calib_info, wx_err_string);
    CalibUtils::calib_max_vol_speed(calib_info, error_message);
    wx_err_string = from_u8(error_message);
    if (!wx_err_string.empty()) {
        MessageDialog msg_dlg(nullptr, wx_err_string, wxEmptyString, wxICON_WARNING | wxOK);
        msg_dlg.ShowModal();
--- a/src/slic3r/Utils/CalibUtils.cpp
+++ b/src/slic3r/Utils/CalibUtils.cpp
@ -1,5 +1,5 @@
 #include "CalibUtils.hpp"
-
+#include "../GUI/I18N.hpp"
 #include "../GUI/GUI_App.hpp"
 #include "../GUI/DeviceManager.hpp"
 #include "../GUI/Jobs/ProgressIndicator.hpp"
@ -182,7 +182,7 @@ std::array<Vec3d, 4> get_cut_plane_points(const BoundingBoxf3 &bbox, const doubl
    return plane_pts;
 }
-void CalibUtils::calib_PA(const X1CCalibInfos& calib_infos, int mode, std::string& error_message)
+void CalibUtils::calib_PA(const X1CCalibInfos& calib_infos, int mode, wxString& error_message)
 {
    DeviceManager *dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev)
@ -360,7 +360,7 @@ bool CalibUtils::get_flow_ratio_calib_results(std::vector<FlowRatioCalibResult>&
    return flow_ratio_calib_results.size() > 0;
 }
-void CalibUtils::calib_flowrate(int pass, const CalibInfo& calib_info, std::string& error_message)
+void CalibUtils::calib_flowrate(int pass, const CalibInfo &calib_info, wxString &error_message)
 {
    if (pass != 1 && pass != 2)
        return;
@ -509,7 +509,7 @@ void CalibUtils::calib_pa_pattern(const CalibInfo &calib_info, Model& model)
    model.calib_pa_pattern = std::make_unique<CalibPressureAdvancePattern>(pa_pattern);
 }
-void CalibUtils::calib_generic_PA(const CalibInfo &calib_info, std::string &error_message)
+void CalibUtils::calib_generic_PA(const CalibInfo &calib_info, wxString &error_message)
 {
    const Calib_Params &params = calib_info.params;
    if (params.mode != CalibMode::Calib_PA_Line && params.mode != CalibMode::Calib_PA_Pattern)
@ -546,7 +546,7 @@ void CalibUtils::calib_generic_PA(const CalibInfo &calib_info, std::string &erro
    send_to_print(calib_info, error_message);
 }
-void CalibUtils::calib_temptue(const CalibInfo& calib_info, std::string& error_message)
+void CalibUtils::calib_temptue(const CalibInfo &calib_info, wxString &error_message)
 {
    const Calib_Params &params = calib_info.params;
    if (params.mode != CalibMode::Calib_Temp_Tower)
@ -616,7 +616,7 @@ void CalibUtils::calib_temptue(const CalibInfo& calib_info, std::string& error_m
    send_to_print(calib_info, error_message);
 }
-void CalibUtils::calib_max_vol_speed(const CalibInfo& calib_info, std::string& error_message)
+void CalibUtils::calib_max_vol_speed(const CalibInfo &calib_info, wxString &error_message)
 {
    const Calib_Params &params = calib_info.params;
    if (params.mode != CalibMode::Calib_Vol_speed_Tower)
@ -695,7 +695,7 @@ void CalibUtils::calib_max_vol_speed(const CalibInfo& calib_info, std::string& e
    send_to_print(calib_info, error_message);
 }
-void CalibUtils::calib_VFA(const CalibInfo& calib_info, std::string& error_message)
+void CalibUtils::calib_VFA(const CalibInfo &calib_info, wxString &error_message)
 {
    const Calib_Params &params = calib_info.params;
    if (params.mode != CalibMode::Calib_VFA_Tower)
@ -736,7 +736,7 @@ void CalibUtils::calib_VFA(const CalibInfo& calib_info, std::string& error_messa
        cut_model(model, plane_pts, ModelObjectCutAttribute::KeepLower);
    }
    else {
-        error_message = L("The start, end or step is not valid value.");
+        error_message = _L("The start, end or step is not valid value.");
        return;
    }
@ -753,7 +753,7 @@ void CalibUtils::calib_VFA(const CalibInfo& calib_info, std::string& error_messa
    send_to_print(calib_info, error_message);
 }
-void CalibUtils::calib_retraction(const CalibInfo &calib_info, std::string &error_message)
+void CalibUtils::calib_retraction(const CalibInfo &calib_info, wxString &error_message)
 {
    const Calib_Params &params = calib_info.params;
    if (params.mode != CalibMode::Calib_Retraction_tower)
@ -826,7 +826,7 @@ bool CalibUtils::get_pa_k_n_value_by_cali_idx(const MachineObject *obj, int cali
    return false;
 }
-void CalibUtils::process_and_store_3mf(Model* model, const DynamicPrintConfig& full_config, const Calib_Params& params, std::string& error_message)
+void CalibUtils::process_and_store_3mf(Model *model, const DynamicPrintConfig &full_config, const Calib_Params &params, wxString &error_message)
 {
    Pointfs bedfs         = full_config.opt<ConfigOptionPoints>("printable_area")->values;
    double  print_height  = full_config.opt_float("printable_height");
@ -868,7 +868,7 @@ void CalibUtils::process_and_store_3mf(Model* model, const DynamicPrintConfig& f
    BuildVolume build_volume(bedfs, print_height);
    unsigned int count = model->update_print_volume_state(build_volume);
    if (count == 0) {
-        error_message = L("Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small");
+        error_message = _L("Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small");
        return;
    }
@ -977,7 +977,7 @@ void CalibUtils::process_and_store_3mf(Model* model, const DynamicPrintConfig& f
    release_PlateData_list(plate_data_list);
 }
-void CalibUtils::send_to_print(const CalibInfo &calib_info, std::string &error_message, int flow_ratio_mode)
+void CalibUtils::send_to_print(const CalibInfo &calib_info, wxString &error_message, int flow_ratio_mode)
 {
    {  // before send
        json j;
@ -1003,35 +1003,35 @@ void CalibUtils::send_to_print(const CalibInfo &calib_info, std::string &error_m
    DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) {
-        error_message = L("Need select printer");
+        error_message = _L("Need select printer");
        return;
    }
    MachineObject* obj_ = dev->get_selected_machine();
    if (obj_ == nullptr) {
-        error_message = L("Need select printer");
+        error_message = _L("Need select printer");
        return;
    }
    if (obj_->is_in_upgrading()) {
-        error_message = L("Cannot send the print job when the printer is updating firmware");
+        error_message = _L("Cannot send the print job when the printer is updating firmware");
        return;
    }
    else if (obj_->is_system_printing()) {
-        error_message = L("The printer is executing instructions. Please restart printing after it ends");
+        error_message = _L("The printer is executing instructions. Please restart printing after it ends");
        return;
    }
    else if (obj_->is_in_printing()) {
-        error_message = L("The printer is busy on other print job");
+        error_message = _L("The printer is busy on other print job");
        return;
    }
    else if (!obj_->is_function_supported(PrinterFunction::FUNC_PRINT_WITHOUT_SD) && (obj_->get_sdcard_state() == MachineObject::SdcardState::NO_SDCARD)) {
-        error_message = L("An SD card needs to be inserted before printing.");
+        error_message = _L("An SD card needs to be inserted before printing.");
        return;
    }
    if (obj_->is_lan_mode_printer()) {
        if (obj_->get_sdcard_state() == MachineObject::SdcardState::NO_SDCARD) {
-            error_message = L("An SD card needs to be inserted before printing via LAN.");
+            error_message = _L("An SD card needs to be inserted before printing via LAN.");
            return;
        }
    }
--- a/src/slic3r/Utils/CalibUtils.hpp
+++ b/src/slic3r/Utils/CalibUtils.hpp
@ -30,7 +30,7 @@ public:
    static CalibMode get_calib_mode_by_name(const std::string name, int &cali_stage);
-    static void calib_PA(const X1CCalibInfos& calib_infos, int mode, std::string& error_message);
+    static void calib_PA(const X1CCalibInfos& calib_infos, int mode, wxString& error_message);
    static void emit_get_PA_calib_results(float nozzle_diameter);
    static bool get_PA_calib_results(std::vector<PACalibResult> &pa_calib_results);
@ -48,15 +48,15 @@ public:
    static void calib_flowrate_X1C(const X1CCalibInfos& calib_infos, std::string& error_message);
    static void emit_get_flow_ratio_calib_results(float nozzle_diameter);
    static bool get_flow_ratio_calib_results(std::vector<FlowRatioCalibResult> &flow_ratio_calib_results);
-    static void calib_flowrate(int pass, const CalibInfo& calib_info, std::string& error_message);
+    static void calib_flowrate(int pass, const CalibInfo &calib_info, wxString &error_message);
    static void calib_pa_pattern(const CalibInfo &calib_info, Model &model);
-    static void calib_generic_PA(const CalibInfo& calib_info, std::string &error_message);
+    static void calib_generic_PA(const CalibInfo &calib_info, wxString &error_message);
-    static void calib_temptue(const CalibInfo& calib_info, std::string& error_message);
+    static void calib_temptue(const CalibInfo &calib_info, wxString &error_message);
-    static void calib_max_vol_speed(const CalibInfo& calib_info, std::string& error_message);
+    static void calib_max_vol_speed(const CalibInfo &calib_info, wxString &error_message);
-    static void calib_VFA(const CalibInfo& calib_info, std::string& error_message);
+    static void calib_VFA(const CalibInfo &calib_info, wxString &error_message);
-    static void calib_retraction(const CalibInfo &calib_info, std::string &error_message);
+    static void calib_retraction(const CalibInfo &calib_info, wxString &error_message);
    //help function
    static int get_selected_calib_idx(const std::vector<PACalibResult> &pa_calib_values, int cali_idx);
@ -66,8 +66,8 @@ public:
    static bool validate_input_flow_ratio(wxString flow_ratio, float* output_value);
 private:
-    static void process_and_store_3mf(Model* model, const DynamicPrintConfig& full_config, const Calib_Params& params, std::string& error_message);
+    static void process_and_store_3mf(Model* model, const DynamicPrintConfig& full_config, const Calib_Params& params, wxString& error_message);
-    static void send_to_print(const CalibInfo &calib_info, std::string& error_message, int flow_ratio_mode = 0); // 0: none  1: coarse  2: fine
+    static void send_to_print(const CalibInfo &calib_info, wxString& error_message, int flow_ratio_mode = 0); // 0: none  1: coarse  2: fine
 };
 }