diff --git a/src/libslic3r/GCode/Analyzer.cpp b/src/libslic3r/GCode/Analyzer.cpp
index 136959d712..30abc5111c 100644
--- a/src/libslic3r/GCode/Analyzer.cpp
+++ b/src/libslic3r/GCode/Analyzer.cpp
@@ -141,6 +141,9 @@ void GCodeAnalyzer::reset()
     _set_start_extrusion(DEFAULT_START_EXTRUSION);
     _set_fan_speed(DEFAULT_FAN_SPEED);
     _reset_axes_position();
+#if ENABLE_GIT_3010_FIX
+    _reset_axes_origin();
+#endif // ENABLE_GIT_3010_FIX
     _reset_cached_position();
 
     m_moves_map.clear();
@@ -310,6 +313,7 @@ void GCodeAnalyzer::_process_gcode_line(GCodeReader&, const GCodeReader::GCodeLi
     m_process_output += line.raw() + "\n";
 }
 
+#if !ENABLE_GIT_3010_FIX
 // Returns the new absolute position on the given axis in dependence of the given parameters
 float axis_absolute_position_from_G1_line(GCodeAnalyzer::EAxis axis, const GCodeReader::GCodeLine& lineG1, GCodeAnalyzer::EUnits units, bool is_relative, float current_absolute_position)
 {
@@ -322,19 +326,49 @@ float axis_absolute_position_from_G1_line(GCodeAnalyzer::EAxis axis, const GCode
     else
         return current_absolute_position;
 }
+#endif // !ENABLE_GIT_3010_FIX
 
 void GCodeAnalyzer::_processG1(const GCodeReader::GCodeLine& line)
 {
+#if ENABLE_GIT_3010_FIX
+    auto axis_absolute_position = [this](GCodeAnalyzer::EAxis axis, const GCodeReader::GCodeLine& lineG1) -> float
+    {
+        float current_absolute_position = _get_axis_position(axis);
+        float current_origin = _get_axis_origin(axis);
+        float lengthsScaleFactor = (_get_units() == GCodeAnalyzer::Inches) ? INCHES_TO_MM : 1.0f;
+
+        bool is_relative = (_get_global_positioning_type() == Relative);
+        if (axis == E)
+            is_relative |= (_get_e_local_positioning_type() == Relative);
+
+        if (lineG1.has(Slic3r::Axis(axis)))
+        {
+            float ret = lineG1.value(Slic3r::Axis(axis)) * lengthsScaleFactor;
+            return is_relative ? current_absolute_position + ret : ret + current_origin;
+        }
+        else
+            return current_absolute_position;
+    };
+#endif // ENABLE_GIT_3010_FIX
+
     // updates axes positions from line
+#if !ENABLE_GIT_3010_FIX
     EUnits units = _get_units();
+#endif // !ENABLE_GIT_3010_FIX
     float new_pos[Num_Axis];
     for (unsigned char a = X; a < Num_Axis; ++a)
     {
+#if !ENABLE_GIT_3010_FIX
         bool is_relative = (_get_global_positioning_type() == Relative);
         if (a == E)
             is_relative |= (_get_e_local_positioning_type() == Relative);
+#endif // !ENABLE_GIT_3010_FIX
 
+#if ENABLE_GIT_3010_FIX
+        new_pos[a] = axis_absolute_position((EAxis)a, line);
+#else
         new_pos[a] = axis_absolute_position_from_G1_line((EAxis)a, line, units, is_relative, _get_axis_position((EAxis)a));
+#endif // ENABLE_GIT_3010_FIX
     }
 
     // updates feedrate from line, if present
@@ -424,25 +458,41 @@ void GCodeAnalyzer::_processG92(const GCodeReader::GCodeLine& line)
 
     if (line.has_x())
     {
+#if ENABLE_GIT_3010_FIX
+        _set_axis_origin(X, _get_axis_position(X) - line.x() * lengthsScaleFactor);
+#else
         _set_axis_position(X, line.x() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
         anyFound = true;
     }
 
     if (line.has_y())
     {
+#if ENABLE_GIT_3010_FIX
+        _set_axis_origin(Y, _get_axis_position(Y) - line.y() * lengthsScaleFactor);
+#else
         _set_axis_position(Y, line.y() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
         anyFound = true;
     }
 
     if (line.has_z())
     {
+#if ENABLE_GIT_3010_FIX
+        _set_axis_origin(Z, _get_axis_position(Z) - line.z() * lengthsScaleFactor);
+#else
         _set_axis_position(Z, line.z() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
         anyFound = true;
     }
 
     if (line.has_e())
     {
+#if ENABLE_GIT_3010_FIX
+        _set_axis_origin(E, _get_axis_position(E) - line.e() * lengthsScaleFactor);
+#else
         _set_axis_position(E, line.e() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
         anyFound = true;
     }
 
@@ -450,7 +500,11 @@ void GCodeAnalyzer::_processG92(const GCodeReader::GCodeLine& line)
     {
         for (unsigned char a = X; a < Num_Axis; ++a)
         {
+#if ENABLE_GIT_3010_FIX
+            _set_axis_origin((EAxis)a, _get_axis_position((EAxis)a));
+#else
             _set_axis_position((EAxis)a, 0.0f);
+#endif // ENABLE_GIT_3010_FIX
         }
     }
 }
@@ -781,11 +835,30 @@ float GCodeAnalyzer::_get_axis_position(EAxis axis) const
     return m_state.position[axis];
 }
 
+#if ENABLE_GIT_3010_FIX
+void GCodeAnalyzer::_set_axis_origin(EAxis axis, float position)
+{
+    m_state.origin[axis] = position;
+}
+
+float GCodeAnalyzer::_get_axis_origin(EAxis axis) const
+{
+    return m_state.origin[axis];
+}
+#endif // ENABLE_GIT_3010_FIX
+
 void GCodeAnalyzer::_reset_axes_position()
 {
     ::memset((void*)m_state.position, 0, Num_Axis * sizeof(float));
 }
 
+#if ENABLE_GIT_3010_FIX
+void GCodeAnalyzer::_reset_axes_origin()
+{
+    ::memset((void*)m_state.origin, 0, Num_Axis * sizeof(float));
+}
+#endif // ENABLE_GIT_3010_FIX
+
 void GCodeAnalyzer::_set_start_position(const Vec3d& position)
 {
     m_state.start_position = position;
diff --git a/src/libslic3r/GCode/Analyzer.hpp b/src/libslic3r/GCode/Analyzer.hpp
index 529610b0b2..ea37b5295f 100644
--- a/src/libslic3r/GCode/Analyzer.hpp
+++ b/src/libslic3r/GCode/Analyzer.hpp
@@ -101,6 +101,9 @@ private:
         float cached_position[5];
         float start_extrusion;
         float position[Num_Axis];
+#if ENABLE_GIT_3010_FIX
+        float origin[Num_Axis];
+#endif // ENABLE_GIT_3010_FIX
         unsigned int cur_cp_color_id = 0;
     };
 
@@ -246,8 +249,17 @@ private:
     void _set_axis_position(EAxis axis, float position);
     float _get_axis_position(EAxis axis) const;
 
+#if ENABLE_GIT_3010_FIX
+    void _set_axis_origin(EAxis axis, float position);
+    float _get_axis_origin(EAxis axis) const;
+#endif // ENABLE_GIT_3010_FIX
+
     // Sets axes position to zero
     void _reset_axes_position();
+#if ENABLE_GIT_3010_FIX
+    // Sets origin position to zero
+    void _reset_axes_origin();
+#endif // ENABLE_GIT_3010_FIX
 
     void _set_start_position(const Vec3d& position);
     const Vec3d& _get_start_position() const;
diff --git a/src/libslic3r/GCodeTimeEstimator.cpp b/src/libslic3r/GCodeTimeEstimator.cpp
index 4693ba9e62..224f010e6a 100644
--- a/src/libslic3r/GCodeTimeEstimator.cpp
+++ b/src/libslic3r/GCodeTimeEstimator.cpp
@@ -412,6 +412,13 @@ namespace Slic3r {
         m_state.axis[axis].position = position;
     }
 
+#if ENABLE_GIT_3010_FIX
+    void GCodeTimeEstimator::set_axis_origin(EAxis axis, float position)
+    {
+        m_state.axis[axis].origin = position;
+    }
+#endif // ENABLE_GIT_3010_FIX
+
     void GCodeTimeEstimator::set_axis_max_feedrate(EAxis axis, float feedrate_mm_sec)
     {
         m_state.axis[axis].max_feedrate = feedrate_mm_sec;
@@ -432,6 +439,13 @@ namespace Slic3r {
         return m_state.axis[axis].position;
     }
 
+#if ENABLE_GIT_3010_FIX
+    float GCodeTimeEstimator::get_axis_origin(EAxis axis) const
+    {
+        return m_state.axis[axis].origin;
+    }
+#endif // ENABLE_GIT_3010_FIX
+
     float GCodeTimeEstimator::get_axis_max_feedrate(EAxis axis) const
     {
         return m_state.axis[axis].max_feedrate;
@@ -758,6 +772,12 @@ namespace Slic3r {
         set_axis_position(X, 0.0f);
         set_axis_position(Y, 0.0f);
         set_axis_position(Z, 0.0f);
+#if ENABLE_GIT_3010_FIX
+        set_axis_origin(X, 0.0f);
+        set_axis_origin(Y, 0.0f);
+        set_axis_origin(Z, 0.0f);
+#endif // ENABLE_GIT_3010_FIX
+
         if (get_e_local_positioning_type() == Absolute)
             set_axis_position(E, 0.0f);
 
@@ -954,6 +974,7 @@ namespace Slic3r {
         }
     }
 
+#if !ENABLE_GIT_3010_FIX
     // Returns the new absolute position on the given axis in dependence of the given parameters
     float axis_absolute_position_from_G1_line(GCodeTimeEstimator::EAxis axis, const GCodeReader::GCodeLine& lineG1, GCodeTimeEstimator::EUnits units, bool is_relative, float current_absolute_position)
     {
@@ -966,22 +987,52 @@ namespace Slic3r {
         else
             return current_absolute_position;
     }
+#endif // !ENABLE_GIT_3010_FIX
 
     void GCodeTimeEstimator::_processG1(const GCodeReader::GCodeLine& line)
     {
+#if ENABLE_GIT_3010_FIX
+        auto axis_absolute_position = [this](GCodeTimeEstimator::EAxis axis, const GCodeReader::GCodeLine& lineG1) -> float
+        {
+            float current_absolute_position = get_axis_position(axis);
+            float current_origin = get_axis_origin(axis);
+            float lengthsScaleFactor = (get_units() == GCodeTimeEstimator::Inches) ? INCHES_TO_MM : 1.0f;
+
+            bool is_relative = (get_global_positioning_type() == Relative);
+            if (axis == E)
+                is_relative |= (get_e_local_positioning_type() == Relative);
+
+            if (lineG1.has(Slic3r::Axis(axis)))
+            {
+                float ret = lineG1.value(Slic3r::Axis(axis)) * lengthsScaleFactor;
+                return is_relative ? current_absolute_position + ret : ret + current_origin;
+            }
+            else
+                return current_absolute_position;
+        };
+#endif // ENABLE_GIT_3010_FIX
+
         PROFILE_FUNC();
         increment_g1_line_id();
 
         // updates axes positions from line
+#if !ENABLE_GIT_3010_FIX
         EUnits units = get_units();
+#endif // !ENABLE_GIT_3010_FIX
         float new_pos[Num_Axis];
         for (unsigned char a = X; a < Num_Axis; ++a)
         {
+#if !ENABLE_GIT_3010_FIX
             bool is_relative = (get_global_positioning_type() == Relative);
             if (a == E)
                 is_relative |= (get_e_local_positioning_type() == Relative);
+#endif // !ENABLE_GIT_3010_FIX
 
+#if ENABLE_GIT_3010_FIX
+            new_pos[a] = axis_absolute_position((EAxis)a, line);
+#else
             new_pos[a] = axis_absolute_position_from_G1_line((EAxis)a, line, units, is_relative, get_axis_position((EAxis)a));
+#endif // !ENABLE_GIT_3010_FIX
         }
 
         // updates feedrate from line, if present
@@ -1225,25 +1276,41 @@ namespace Slic3r {
 
         if (line.has_x())
         {
+#if ENABLE_GIT_3010_FIX
+            set_axis_origin(X, get_axis_position(X) - line.x() * lengthsScaleFactor);
+#else
             set_axis_position(X, line.x() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
             anyFound = true;
         }
 
         if (line.has_y())
         {
+#if ENABLE_GIT_3010_FIX
+            set_axis_origin(Y, get_axis_position(Y) - line.y() * lengthsScaleFactor);
+#else
             set_axis_position(Y, line.y() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
             anyFound = true;
         }
 
         if (line.has_z())
         {
+#if ENABLE_GIT_3010_FIX
+            set_axis_origin(Z, get_axis_position(Z) - line.z() * lengthsScaleFactor);
+#else
             set_axis_position(Z, line.z() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
             anyFound = true;
         }
 
         if (line.has_e())
         {
+#if ENABLE_GIT_3010_FIX
+            set_axis_origin(E, get_axis_position(E) - line.e() * lengthsScaleFactor);
+#else
             set_axis_position(E, line.e() * lengthsScaleFactor);
+#endif // ENABLE_GIT_3010_FIX
             anyFound = true;
         }
         else
@@ -1253,7 +1320,11 @@ namespace Slic3r {
         {
             for (unsigned char a = X; a < Num_Axis; ++a)
             {
+#if ENABLE_GIT_3010_FIX
+                set_axis_origin((EAxis)a, get_axis_position((EAxis)a));
+#else
                 set_axis_position((EAxis)a, 0.0f);
+#endif // ENABLE_GIT_3010_FIX
             }
         }
     }
diff --git a/src/libslic3r/GCodeTimeEstimator.hpp b/src/libslic3r/GCodeTimeEstimator.hpp
index d9f3bc2113..67361e799e 100644
--- a/src/libslic3r/GCodeTimeEstimator.hpp
+++ b/src/libslic3r/GCodeTimeEstimator.hpp
@@ -55,6 +55,9 @@ namespace Slic3r {
         struct Axis
         {
             float position;         // mm
+#if ENABLE_GIT_3010_FIX
+            float origin;           // mm
+#endif // ENABLE_GIT_3010_FIX
             float max_feedrate;     // mm/s
             float max_acceleration; // mm/s^2
             float max_jerk;         // mm/s
@@ -282,6 +285,10 @@ namespace Slic3r {
 
         // Set current position on the given axis with the given value
         void set_axis_position(EAxis axis, float position);
+#if ENABLE_GIT_3010_FIX
+        // Set current origin on the given axis with the given value
+        void set_axis_origin(EAxis axis, float position);
+#endif // ENABLE_GIT_3010_FIX
 
         void set_axis_max_feedrate(EAxis axis, float feedrate_mm_sec);
         void set_axis_max_acceleration(EAxis axis, float acceleration);
@@ -289,6 +296,10 @@ namespace Slic3r {
 
         // Returns current position on the given axis
         float get_axis_position(EAxis axis) const;
+#if ENABLE_GIT_3010_FIX
+        // Returns current origin on the given axis
+        float get_axis_origin(EAxis axis) const;
+#endif // ENABLE_GIT_3010_FIX
 
         float get_axis_max_feedrate(EAxis axis) const;
         float get_axis_max_acceleration(EAxis axis) const;
diff --git a/src/libslic3r/Technologies.hpp b/src/libslic3r/Technologies.hpp
index 51d0920946..875b0bff3c 100644
--- a/src/libslic3r/Technologies.hpp
+++ b/src/libslic3r/Technologies.hpp
@@ -32,4 +32,12 @@
 #define ENABLE_NONCUSTOM_DATA_VIEW_RENDERING (0 && ENABLE_1_42_0_ALPHA1)
 
 
+//===================
+// 2.2.0.alpha1 techs
+//===================
+#define ENABLE_2_2_0_ALPHA1 1
+
+// Fixes git issue 3010
+#define ENABLE_GIT_3010_FIX (1 && ENABLE_2_2_0_ALPHA1)
+
 #endif // _technologies_h_