diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 0242cba66f..9a6e3fa2d1 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -549,184 +549,8 @@ "sub_path": "filament/Qidi Generic ABS.json" }, { - "name": "Qidi Generic ASA", - "sub_path": "filament/Qidi Generic ASA.json" - }, - { - "name": "Qidi Generic PA", - "sub_path": "filament/Qidi Generic PA.json" - }, - { - "name": "Qidi Generic PA-CF", - "sub_path": "filament/Qidi Generic PA-CF.json" - }, - { - "name": "Qidi Generic PC", - "sub_path": "filament/Qidi Generic PC.json" - }, - { - "name": "Qidi Generic PETG", - "sub_path": "filament/Qidi Generic PETG.json" - }, - { - "name": "Qidi Generic PETG-CF", - "sub_path": "filament/Qidi Generic PETG-CF.json" - }, - { - "name": "Qidi Generic PLA Silk", - "sub_path": "filament/Qidi Generic PLA Silk.json" - }, - { - "name": "Qidi Generic PLA", - "sub_path": "filament/Qidi Generic PLA.json" - }, - { - "name": "Qidi Generic PLA-CF", - "sub_path": "filament/Qidi Generic PLA-CF.json" - }, - { - "name": "Qidi Generic PVA", - "sub_path": "filament/Qidi Generic PVA.json" - }, - { - "name": "Qidi TPU 95A-HF", - "sub_path": "filament/Qidi TPU 95A-HF.json" - }, - { - "name": "QIDI ABS Rapido", - "sub_path": "filament/QIDI ABS Rapido.json" - }, - { - "name": "QIDI ABS Rapido 0.2 nozzle", - "sub_path": "filament/QIDI ABS Rapido 0.2 nozzle.json" - }, - { - "name": "QIDI ABS Rapido 0.8 nozzle", - "sub_path": "filament/QIDI ABS Rapido 0.8 nozzle.json" - }, - { - "name": "QIDI PLA Rapido", - "sub_path": "filament/QIDI PLA Rapido.json" - }, - { - "name": "QIDI PLA Rapido 0.2 nozzle", - "sub_path": "filament/QIDI PLA Rapido 0.2 nozzle.json" - }, - { - "name": "QIDI PLA Rapido 0.8 nozzle", - "sub_path": "filament/QIDI PLA Rapido 0.8 nozzle.json" - }, - { - "name": "QIDI PETG Tough", - "sub_path": "filament/QIDI PETG Tough.json" - }, - { - "name": "QIDI PETG Tough 0.2 nozzle", - "sub_path": "filament/QIDI PETG Tough 0.2 nozzle.json" - }, - { - "name": "QIDI PETG Tough 0.6 nozzle", - "sub_path": "filament/QIDI PETG Tough 0.6 nozzle.json" - }, - { - "name": "QIDI PETG Tough 0.8 nozzle", - "sub_path": "filament/QIDI PETG Tough 0.8 nozzle.json" - }, - { - "name": "QIDI PET-CF", - "sub_path": "filament/QIDI PET-CF.json" - }, - { - "name": "QIDI PA12-CF", - "sub_path": "filament/QIDI PA12-CF.json" - }, - { - "name": "QIDI PAHT-CF", - "sub_path": "filament/QIDI PAHT-CF.json" - }, - { - "name": "QIDI ABS-GF25", - "sub_path": "filament/QIDI ABS-GF25.json" - }, - { - "name": "QIDI PA-Ultra", - "sub_path": "filament/QIDI PA-Ultra.json" - }, - { - "name": "Tinmorry PETG-ECO", - "sub_path": "filament/Tinmorry PETG-ECO.json" - }, - { - "name": "Qidi Generic TPU", - "sub_path": "filament/Qidi Generic TPU.json" - }, - { - "name": "QIDI ABS-GF10", - "sub_path": "filament/QIDI ABS-GF10.json" - }, - { - "name": "Qidi PC-ABS-FR", - "sub_path": "filament/Qidi PC-ABS-FR.json" - }, - { - "name": "Qidi ASA-Aero", - "sub_path": "filament/Qidi ASA-Aero.json" - }, - { - "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json" - }, - { - "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle", - "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json" - }, - { - "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json" - }, - { - "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json" - }, - { - "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json" - }, - { - "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json" - }, - { - "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json" - }, - { - "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json" - }, - { - "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json" - }, - { - "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json" - }, - { - "name": "Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json" - }, - { - "name": "Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json" - }, - { - "name": "Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json" - }, - { - "name": "Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json" + "name": "Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json" }, { "name": "Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle", @@ -741,36 +565,36 @@ "sub_path": "filament/Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle.json" }, { - "name": "Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle", - "sub_path": "filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json" + "name": "Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json" + "name": "Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json" + "name": "Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json" + "name": "Qidi Generic PETG", + "sub_path": "filament/Qidi Generic PETG.json" }, { - "name": "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json" + "name": "Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json" + "name": "Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json" + "name": "Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json" }, { - "name": "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle", - "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json" + "name": "Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json" }, { "name": "Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle", @@ -785,20 +609,24 @@ "sub_path": "filament/Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle.json" }, { - "name": "Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json" + "name": "Qidi Generic PLA", + "sub_path": "filament/Qidi Generic PLA.json" }, { - "name": "Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle", - "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json" + "name": "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json" }, { - "name": "Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json" + "name": "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json" }, { - "name": "Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json" + "name": "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json" }, { "name": "Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle", @@ -813,32 +641,128 @@ "sub_path": "filament/Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle.json" }, { - "name": "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json" + "name": "Qidi Generic TPU 95A", + "sub_path": "filament/Qidi Generic TPU 95A.json" }, { - "name": "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle", - "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json" + "name": "Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json" }, { - "name": "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle", - "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json" + "name": "QIDI ABS Odorless", + "sub_path": "filament/QIDI ABS Odorless.json" }, { - "name": "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json" + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json" }, { - "name": "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json" + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json" }, { - "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json" + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json" }, { - "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle", - "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json" + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI ABS Odorless @0.2 nozzle", + "sub_path": "filament/QIDI ABS Odorless @0.2 nozzle.json" + }, + { + "name": "QIDI ABS Odorless @0.8 nozzle", + "sub_path": "filament/QIDI ABS Odorless @0.8 nozzle.json" + }, + { + "name": "QIDI ABS Rapido", + "sub_path": "filament/QIDI ABS Rapido.json" + }, + { + "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json" + }, + { + "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI ABS Rapido 0.2 nozzle", + "sub_path": "filament/QIDI ABS Rapido 0.2 nozzle.json" + }, + { + "name": "QIDI ABS Rapido 0.8 nozzle", + "sub_path": "filament/QIDI ABS Rapido 0.8 nozzle.json" + }, + { + "name": "QIDI ABS-GF25", + "sub_path": "filament/QIDI ABS-GF25.json" + }, + { + "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI ASA", + "sub_path": "filament/QIDI ASA.json" + }, + { + "name": "QIDI ASA @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi X-Max 3 0.2 nozzle", + "sub_path": "filament/QIDI ASA @Qidi X-Max 3 0.2 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi X-Plus 3 0.2 nozzle", + "sub_path": "filament/QIDI ASA @Qidi X-Plus 3 0.2 nozzle.json" + }, + { + "name": "QIDI ASA @Qidi X-Smart 3 0.2 nozzle", + "sub_path": "filament/QIDI ASA @Qidi X-Smart 3 0.2 nozzle.json" + }, + { + "name": "Qidi ASA-Aero", + "sub_path": "filament/Qidi ASA-Aero.json" + }, + { + "name": "Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI PA12-CF", + "sub_path": "filament/QIDI PA12-CF.json" }, { "name": "QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle", @@ -852,6 +776,10 @@ "name": "QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle.json" }, + { + "name": "QIDI PAHT-CF", + "sub_path": "filament/QIDI PAHT-CF.json" + }, { "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle", "sub_path": "filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json" @@ -864,6 +792,10 @@ "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json" }, + { + "name": "Qidi PC-ABS-FR", + "sub_path": "filament/Qidi PC-ABS-FR.json" + }, { "name": "Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle", "sub_path": "filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json" @@ -876,6 +808,10 @@ "name": "Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle.json" }, + { + "name": "QIDI PET-CF", + "sub_path": "filament/QIDI PET-CF.json" + }, { "name": "QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle", "sub_path": "filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json" @@ -889,25 +825,49 @@ "sub_path": "filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json" }, { - "name": "QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json" + "name": "QIDI PETG Tough", + "sub_path": "filament/QIDI PETG Tough.json" }, { "name": "QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle", "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json" }, + { + "name": "QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json" + }, { "name": "QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json" }, { - "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle", - "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json" + "name": "QIDI PETG Tough 0.2 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.2 nozzle.json" + }, + { + "name": "QIDI PETG Tough 0.6 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.6 nozzle.json" + }, + { + "name": "QIDI PETG Tough 0.8 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.8 nozzle.json" + }, + { + "name": "QIDI PLA Rapido", + "sub_path": "filament/QIDI PLA Rapido.json" }, { "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle", "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json" }, + { + "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json" + }, { "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle", "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json" @@ -916,6 +876,198 @@ "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json" }, + { + "name": "QIDI PLA Rapido 0.2 nozzle", + "sub_path": "filament/QIDI PLA Rapido 0.2 nozzle.json" + }, + { + "name": "QIDI PLA Rapido @0.6 nozzle", + "sub_path": "filament/QIDI PLA Rapido @0.6 nozzle.json" + }, + { + "name": "QIDI PLA Rapido 0.8 nozzle", + "sub_path": "filament/QIDI PLA Rapido 0.8 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte", + "sub_path": "filament/QIDI PLA Rapido Matte.json" + }, + { + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @0.2 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @0.2 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @0.6 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @0.6 nozzle.json" + }, + { + "name": "QIDI PLA Rapido Matte @0.8 nozzle", + "sub_path": "filament/QIDI PLA Rapido Matte @0.8 nozzle.json" + }, + { + "name": "Qidi PLA-CF", + "sub_path": "filament/Qidi PLA-CF.json" + }, + { + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI PLA-CF @0.6 nozzle", + "sub_path": "filament/QIDI PLA-CF @0.6 nozzle.json" + }, + { + "name": "QIDI PLA-CF @0.8 nozzle", + "sub_path": "filament/QIDI PLA-CF @0.8 nozzle.json" + }, + { + "name": "QIDI PA-Ultra", + "sub_path": "filament/QIDI PA-Ultra.json" + }, + { + "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI ABS-GF10", + "sub_path": "filament/QIDI ABS-GF10.json" + }, + { + "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "Tinmorry PETG-ECO", + "sub_path": "filament/Tinmorry PETG-ECO.json" + }, + { + "name": "Qidi Generic TPU", + "sub_path": "filament/Qidi Generic TPU.json" + }, + { + "name": "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "Qidi Generic ASA", + "sub_path": "filament/Qidi Generic ASA.json" + }, + { + "name": "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json" + }, + { + "name": "Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle", + "sub_path": "filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json" + }, + { + "name": "Qidi Generic PA", + "sub_path": "filament/Qidi Generic PA.json" + }, + { + "name": "Qidi Generic PA-CF", + "sub_path": "filament/Qidi Generic PA-CF.json" + }, + { + "name": "Qidi Generic PC", + "sub_path": "filament/Qidi Generic PC.json" + }, + { + "name": "Qidi Generic PETG-CF", + "sub_path": "filament/Qidi Generic PETG-CF.json" + }, + { + "name": "Qidi Generic PLA Silk", + "sub_path": "filament/Qidi Generic PLA Silk.json" + }, + { + "name": "Qidi Generic PVA", + "sub_path": "filament/Qidi Generic PVA.json" + }, + { + "name": "QIDI ABS-GF", + "sub_path": "filament/QIDI ABS-GF.json" + }, + { + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "Qidi Generic PLA-CF", + "sub_path": "filament/Qidi Generic PLA-CF.json" + }, + { + "name": "Qidi TPU 95A-HF", + "sub_path": "filament/Qidi TPU 95A-HF.json" + }, { "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle", "sub_path": "filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json" @@ -924,7 +1076,6 @@ "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json" } - ], "machine_list": [ { diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.2 nozzle.json new file mode 100644 index 0000000000..8f0cd8942d --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.2 nozzle.json @@ -0,0 +1,35 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS Odorless @0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ABS Odorless", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "max_fan_speed":[ + "80" + ], + "min_fan_speed":[ + "10" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.8 nozzle.json new file mode 100644 index 0000000000..0474f72171 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @0.8 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS Odorless @0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ABS Odorless", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "nozzle_temperature": [ + "270" + ], + "slow_down_min_speed": [ + "10" + ], + "max_fan_speed":[ + "80" + ], + "min_fan_speed":[ + "10" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json new file mode 100644 index 0000000000..8e56cc5a03 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "from": "system", + "hot_plate_temp_initial_layer": [ + "90" + ], + "inherits": "QIDI ABS Odorless", + "is_custom_defined": "0", + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle", + "nozzle_temperature": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.021" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ +"Qidi Q1 Pro 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..c0a349fa31 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "from": "system", + "hot_plate_temp_initial_layer": [ + "90" + ], + "inherits": "QIDI ABS Odorless", + "is_custom_defined": "0", + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle", + "nozzle_temperature": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ +"Qidi Q1 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..020153b310 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "from": "system", + "hot_plate_temp_initial_layer": [ + "90" + ], + "inherits": "QIDI ABS Odorless", + "is_custom_defined": "0", + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle", + "nozzle_temperature": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.014" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ +"Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..ccaacdfe14 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "from": "system", + "hot_plate_temp_initial_layer": [ + "90" + ], + "inherits": "QIDI ABS Odorless", + "is_custom_defined": "0", + "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.011" + ], + "slow_down_min_speed": [ + "10" + ], + "compatible_printers": [ +"Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless.json new file mode 100644 index 0000000000..ccc24c26c7 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS Odorless", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.92" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "max_fan_speed":[ + "80" + ], + "min_fan_speed":[ + "10" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.02" + ], + "chamber_temperature": [ + "55" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json index 52d285cfa1..87970900da 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "QIDI ABS Rapido 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "QIDI ABS Rapido", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 0.2 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json index 3460538218..8a348e7acb 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json @@ -5,9 +5,9 @@ "name": "QIDI ABS Rapido 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "QIDI ABS Rapido", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -19,13 +19,10 @@ "22" ], "nozzle_temperature": [ - "260" + "270" ], "slow_down_min_speed": [ "10" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 0.8 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json index 7656eb8f6c..683be9035f 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json @@ -4,7 +4,7 @@ "setting_id": "GFSA04", "instantiation": "true", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -21,7 +21,7 @@ "filament_max_volumetric_speed": [ "2" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "90" ], @@ -41,6 +41,6 @@ "20" ], "compatible_printers": [ - "Qidi Q1 Pro 0.2 nozzle" +"Qidi Q1 Pro 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json index 7a02f947c3..94d9f981cc 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.4 nozzle.json @@ -4,7 +4,7 @@ "setting_id": "GFSA04", "instantiation": "true", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -21,7 +21,7 @@ "filament_max_volumetric_speed": [ "24.5" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "90" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json index 1b3cd4ac62..ac603a1776 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.6 nozzle.json @@ -4,7 +4,7 @@ "setting_id": "GFSA04", "instantiation": "true", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -21,7 +21,7 @@ "filament_max_volumetric_speed": [ "24.5" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "90" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json index 29e4c1db5c..b661799a9f 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json @@ -4,7 +4,7 @@ "setting_id": "GFSA04", "instantiation": "true", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -21,7 +21,7 @@ "filament_max_volumetric_speed": [ "24.5" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "90" ], @@ -38,7 +38,7 @@ "0.011" ], "slow_down_min_speed": [ - "20" + "10" ], "compatible_printers": [ "Qidi Q1 Pro 0.8 nozzle" diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido.json index 347f1dba84..e9b5f75734 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido.json @@ -7,10 +7,10 @@ "instantiation": "true", "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.926" + "0.95" ], "filament_max_volumetric_speed": [ - "20" + "22" ], "enable_pressure_advance": [ "1" @@ -18,8 +18,20 @@ "pressure_advance": [ "0.021" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + "max_fan_speed":[ + "80" + ], + "min_fan_speed":[ + "20" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.05" + ], + "chamber_temperature": [ + "55" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -34,5 +46,6 @@ "Qidi X-Smart 3 0.6 nozzle", "Qidi X-Plus 3 0.6 nozzle", "Qidi X-Max 3 0.6 nozzle" + ] } diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..fe72ee456c --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,51 @@ +{ "type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_settings_id": [ + "QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle" + ], + "from": "system", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "QIDI ABS-GF", + "is_custom_defined": "0", + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..80621e46a7 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ "type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_settings_id": [ + "QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "QIDI ABS-GF", + "is_custom_defined": "0", + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.6 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.01" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..b81523c619 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ "type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_settings_id": [ + "QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle" + ], + "from": "system", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "inherits": "QIDI ABS-GF", + "is_custom_defined": "0", + "name": "QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.01" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF.json b/resources/profiles/Qidi/filament/QIDI ABS-GF.json new file mode 100644 index 0000000000..1e946ef06a --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS-GF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "17" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.01" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature": [ + "270" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "chamber_temperature": [ + "55" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.15" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json index a0ab3b3427..e77c21a52a 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json index cc825857d1..86b9418093 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle.json @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF10 @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json index 532b8229eb..4070af9946 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle.json @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF10 @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF10.json b/resources/profiles/Qidi/filament/QIDI ABS-GF10.json index baf5860ade..a102a1213b 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF10.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF10.json @@ -5,21 +5,42 @@ "name": "QIDI ABS-GF10", "from": "system", "instantiation": "true", - "inherits": "QIDI ABS-GF25", + "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.94" + "0.95" ], "filament_max_volumetric_speed": [ - "14" + "17" ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_range_high": [ - "280" + "enable_pressure_advance": [ + "1" ], "pressure_advance": [ - "0.02" + "0.01" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature": [ + "270" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "chamber_temperature": [ + "55" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "overhang_fan_speed": [ + "100" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json index 2469011167..fd278ed2d7 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json @@ -3,10 +3,10 @@ "setting_id": "GFSA04", "instantiation": "true", "activate_chamber_temp_control": [ - "0" + "1" ], "chamber_temperature": [ - "55" + "0" ], "fan_max_speed": [ "20" @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json index 0d56960e81..a3782cc2a1 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json @@ -3,10 +3,10 @@ "setting_id": "GFSA04", "instantiation": "true", "activate_chamber_temp_control": [ - "0" + "1" ], "chamber_temperature": [ - "55" + "0" ], "fan_max_speed": [ "20" @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json index aa7dd8a793..da2469deb5 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json @@ -3,10 +3,10 @@ "setting_id": "GFSA04", "instantiation": "true", "activate_chamber_temp_control": [ - "0" + "1" ], "chamber_temperature": [ - "55" + "0" ], "fan_max_speed": [ "20" @@ -20,7 +20,7 @@ "filament_settings_id": [ "QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25.json index 3c5b8af588..ff520549c1 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF25.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25.json @@ -7,10 +7,10 @@ "instantiation": "true", "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.9" + "0.95" ], "filament_max_volumetric_speed": [ - "15" + "17" ], "enable_pressure_advance": [ "1" @@ -24,14 +24,23 @@ "nozzle_temperature": [ "270" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" - ], "fan_max_speed": [ - "30" + "20" ], "fan_min_speed": [ - "10" + "20" + ], + "chamber_temperature": [ + "55" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "overhang_fan_speed": [ + "100" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json new file mode 100644 index 0000000000..1cf845ad22 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ASA @Qidi Q1 Pro 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ASA", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..01fb0eaca2 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,42 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_cooling_layer_time": [ + "40" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_settings_id": [ + "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle" + ], + "from": "system", + "inherits": "QIDI ASA", + "is_custom_defined": "0", + "name": "QIDI ASA @Qidi Q1 Pro 0.4 nozzle", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.035" + ], + "slow_down_layer_time": [ + "4" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..fc21c6e1e3 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,42 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_cooling_layer_time": [ + "40" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_settings_id": [ + "QIDI ASA @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "inherits": "QIDI ASA", + "is_custom_defined": "0", + "name": "QIDI ASA @Qidi Q1 Pro 0.6 nozzle", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.014" + ], + "slow_down_layer_time": [ + "4" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..9d11a1834e --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,42 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_chamber_temp_control": [ + "0" + ], + "chamber_temperature": [ + "55" + ], + "fan_cooling_layer_time": [ + "40" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_settings_id": [ + "QIDI ASA @Qidi Q1 Pro 0.8 nozzle" + ], + "from": "system", + "inherits": "QIDI ASA", + "is_custom_defined": "0", + "name": "QIDI ASA @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "pressure_advance": [ + "0.011" + ], + "slow_down_layer_time": [ + "4" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Max 3 0.2 nozzle.json new file mode 100644 index 0000000000..543a8f2bb5 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Max 3 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ASA @Qidi X-Max 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ASA", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "enable_volume_fan":[ + "40" + ], + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 3 0.2 nozzle.json new file mode 100644 index 0000000000..88404df2bf --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 3 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ASA @Qidi X-Plus 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ASA", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "enable_volume_fan":[ + "40" + ], + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Smart 3 0.2 nozzle.json new file mode 100644 index 0000000000..596ee112ea --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Smart 3 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ASA @Qidi X-Smart 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI ASA", + "filament_flow_ratio": [ + "0.92" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "enable_volume_fan":[ + "40" + ], + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ASA.json b/resources/profiles/Qidi/filament/QIDI ASA.json new file mode 100644 index 0000000000..860d743bba --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ASA.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ASA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_max_volumetric_speed": [ + "16" + ], + "filament_flow_ratio": [ + "0.92" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature": [ + "270" + ], + "cool_plate_temp" : [ + "90" + ], + "eng_plate_temp" : [ + "90" + ], + "hot_plate_temp" : [ + "90" + ], + "textured_plate_temp" : [ + "90" + ], + "cool_plate_temp_initial_layer" : [ + "90" + ], + "eng_plate_temp_initial_layer" : [ + "90" + ], + "hot_plate_temp_initial_layer" : [ + "90" + ], + "textured_plate_temp_initial_layer" : [ + "90" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "max_fan_speed":[ + "50" + ], + "min_fan_speed":[ + "10" + ], + "filament_retraction_length": [ + "0.01" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.07" + ], + "chamber_temperature": [ + "55" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json index adb8718390..7c7a3dc95e 100644 --- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json @@ -14,12 +14,12 @@ "filament_settings_id": [ "QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ - "100" + "80" ], "hot_plate_temp_initial_layer": [ - "100" + "80" ], "inherits": "QIDI PA-Ultra", "is_custom_defined": "0", diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..9c7d962ddb --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,36 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_settings_id": [ + "QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "QIDI PA-Ultra", + "is_custom_defined": "0", + "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle", + "overhang_fan_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json index 94fd3a3c4e..fe2af9df15 100644 --- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json @@ -14,12 +14,12 @@ "filament_settings_id": [ "QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ - "100" + "80" ], "hot_plate_temp_initial_layer": [ - "100" + "80" ], "inherits": "QIDI PA-Ultra", "is_custom_defined": "0", diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra.json index e4d1b7679f..91b0873137 100644 --- a/resources/profiles/Qidi/filament/QIDI PA-Ultra.json +++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra.json @@ -24,6 +24,27 @@ "pressure_advance": [ "0.03" ], + "max_fan_speed":[ + "40" +], +"min_fan_speed":[ + "20" +], +"hot_plate_temp_initial_layer" : [ + "80" +], +"hot_plate_temp" : [ +"80" +], +"slow_down_layer_time": [ +"15" +], +"filament_density":[ +"1.21" +], +"filament_flow_ratio": [ +"0.96" +], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", @@ -41,7 +62,6 @@ "Qidi X-CF Pro 0.8 nozzle", "Qidi X-Smart 3 0.8 nozzle", "Qidi X-Plus 3 0.8 nozzle", -"Qidi X-Max 3 0.8 nozzle", -"Qidi Q1 Pro 0.6 nozzle" +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle.json index 13cbe61f4c..9a28add435 100644 --- a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PA12-CF", "is_custom_defined": "0", "name": "QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle", @@ -22,7 +22,7 @@ "280" ], "overhang_fan_speed": [ - "50" + "100" ], "pressure_advance": [ "0.035" diff --git a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle.json index be1bbc67d3..0674bacba6 100644 --- a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PA12-CF", "is_custom_defined": "0", "name": "QIDI PA12-CF @Qidi Q1 Pro 0.6 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle.json index 37469c94fe..71723f666b 100644 --- a/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PA12-CF", "is_custom_defined": "0", "name": "QIDI PA12-CF @Qidi Q1 Pro 0.8 nozzle", @@ -22,7 +22,7 @@ "280" ], "overhang_fan_speed": [ - "50" + "100" ], "pressure_advance": [ "0.035" diff --git a/resources/profiles/Qidi/filament/QIDI PA12-CF.json b/resources/profiles/Qidi/filament/QIDI PA12-CF.json index 08f55efc1f..c53243db4b 100644 --- a/resources/profiles/Qidi/filament/QIDI PA12-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PA12-CF.json @@ -16,25 +16,25 @@ "290" ], "filament_max_volumetric_speed": [ - "8" + "10" ], "fan_max_speed": [ - "30" + "40" ], "fan_min_speed": [ - "10" + "20" ], "overhang_fan_threshold": [ "0%" ], "overhang_fan_speed": [ - "40" + "100" ], "fan_cooling_layer_time": [ "5" ], "full_fan_speed_layer": [ - "3" + "0" ], "enable_pressure_advance": [ "1" @@ -42,6 +42,21 @@ "pressure_advance": [ "0.01" ], + "hot_plate_temp_initial_layer" : [ + "80" +], +"hot_plate_temp" : [ + "80" +], +"slow_down_layer_time": [ + "5" +], +"filament_density":[ + "1.09" +], +"filament_flow_ratio": [ + "0.96" +], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", @@ -60,5 +75,6 @@ "Qidi X-Smart 3 0.8 nozzle", "Qidi X-Plus 3 0.8 nozzle", "Qidi X-Max 3 0.8 nozzle" + ] } diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json index 5f76aa62ba..b1e941182d 100644 --- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json @@ -12,12 +12,12 @@ "20" ], "filament_max_volumetric_speed": [ - "8" + "14" ], "filament_settings_id": [ "QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PAHT-CF", "is_custom_defined": "0", "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json index 5b5f87a145..857aa45526 100644 --- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PAHT-CF", "is_custom_defined": "0", "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json index 85819678e5..91d06fc311 100644 --- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PAHT-CF", "is_custom_defined": "0", "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF.json index a004038980..0ec7270135 100644 --- a/resources/profiles/Qidi/filament/QIDI PAHT-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF.json @@ -16,13 +16,13 @@ "310" ], "filament_max_volumetric_speed": [ - "8" + "14" ], "fan_max_speed": [ - "30" + "40" ], "fan_min_speed": [ - "10" + "20" ], "overhang_fan_threshold": [ "0%" @@ -34,7 +34,7 @@ "5" ], "full_fan_speed_layer": [ - "2" + "0" ], "enable_pressure_advance": [ "1" @@ -42,6 +42,21 @@ "pressure_advance": [ "0.01" ], + "hot_plate_temp_initial_layer" : [ + "80" +], +"hot_plate_temp" : [ + "80" +], +"slow_down_layer_time": [ + "5" +], +"filament_density":[ + "1.20" +], +"filament_flow_ratio": [ + "0.96" +], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json index ee1fd39763..f991ef9603 100644 --- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PET-CF", "is_custom_defined": "0", "name": "QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle", @@ -25,10 +25,10 @@ "280" ], "overhang_fan_speed": [ - "50" + "100" ], "pressure_advance": [ - "0.032" + "0.01" ], "slow_down_layer_time": [ "5" diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json index 1f22f9ff22..efaefef830 100644 --- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PET-CF", "is_custom_defined": "0", "name": "QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json index 7a11be473b..9eff17f586 100644 --- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "inherits": "QIDI PET-CF", "is_custom_defined": "0", "name": "QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle", @@ -25,7 +25,7 @@ "280" ], "overhang_fan_speed": [ - "50" + "100" ], "pressure_advance": [ "0.025" diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF.json b/resources/profiles/Qidi/filament/QIDI PET-CF.json index c27f725f1d..b1173f811a 100644 --- a/resources/profiles/Qidi/filament/QIDI PET-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PET-CF.json @@ -16,25 +16,25 @@ "320" ], "filament_max_volumetric_speed": [ - "8" + "12" ], "fan_max_speed": [ - "30" + "40" ], "fan_min_speed": [ - "10" + "20" ], "overhang_fan_threshold": [ "0%" ], "overhang_fan_speed": [ - "40" + "100" ], "fan_cooling_layer_time": [ "5" ], "full_fan_speed_layer": [ - "3" + "0" ], "enable_pressure_advance": [ "1" @@ -42,6 +42,21 @@ "pressure_advance": [ "0.01" ], + "hot_plate_temp_initial_layer" : [ + "80" +], +"hot_plate_temp" : [ + "80" +], +"slow_down_layer_time": [ + "5" +], +"filament_density":[ + "1.30" +], +"filament_flow_ratio": [ + "1" +], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json index de315e8243..78aa5e9048 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "QIDI PETG Tough 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "QIDI PETG Tough", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -28,7 +28,7 @@ "10" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ "8" @@ -40,10 +40,10 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ - "1" + "16" ], "compatible_printers": [ "Qidi X-Plus 0.2 nozzle", @@ -51,6 +51,7 @@ "Qidi X-CF Pro 0.2 nozzle", "Qidi X-Smart 3 0.2 nozzle", "Qidi X-Plus 3 0.2 nozzle", - "Qidi X-Max 3 0.2 nozzle" + "Qidi X-Max 3 0.2 nozzle", + "Qidi Q1 Pro 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json index 3b938eb9d7..7f4da85e59 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json @@ -5,7 +5,7 @@ "name": "QIDI PETG Tough 0.6 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "QIDI PETG Tough", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,13 +16,13 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ "8" @@ -34,7 +34,7 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ "16" diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json index 8b2f70e6fe..a99c52e8be 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json @@ -5,7 +5,7 @@ "name": "QIDI PETG Tough 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "QIDI PETG Tough", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -34,7 +34,7 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ "16" diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json index 0fe156f437..eb65ae3ef3 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "80" ], diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json index 6b4c5a396d..26def59c54 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "80" ], diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..6183243f5c --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,30 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_settings_id": [ + "QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "hot_plate_temp_initial_layer": [ + "80" + ], + "inherits": "QIDI PETG Tough", + "is_custom_defined": "0", + "name": "QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle", + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json index 662fa68527..5ca1cbdec1 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json @@ -14,7 +14,7 @@ "filament_settings_id": [ "QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "80" ], diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough.json b/resources/profiles/Qidi/filament/QIDI PETG Tough.json index 972e94bd93..c0f3a7ad46 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough.json @@ -16,16 +16,16 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" ], "fan_max_speed": [ - "90" + "40" ], "fan_min_speed": [ - "40" + "10" ], "slow_down_min_speed": [ "20" @@ -37,13 +37,22 @@ "0.95" ], "filament_max_volumetric_speed": [ - "12" + "16" ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ - "0.05" + "0.04" + ], + "hot_plate_temp_initial_layer" : [ + "80" + ], + "hot_plate_temp" : [ + "80" + ], + "filament_density":[ + "1.24" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -51,7 +60,6 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle", - "Qidi Q1 Pro 0.6 nozzle" + "Qidi X-Max 3 0.4 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json index 216b98c41e..83805585f4 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json @@ -5,19 +5,16 @@ "name": "QIDI PLA Rapido 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "QIDI PLA Rapido", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" ], - "pressure_advance": [ - "0.031" - ], "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json index 55615fd03d..81059b30b7 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json @@ -5,21 +5,21 @@ "name": "QIDI PLA Rapido 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "QIDI PLA Rapido", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ - "0.031" + "0.008" ], "filament_max_volumetric_speed": [ - "22" + "20" ], "compatible_printers": [ "Qidi X-Plus 0.8 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @0.6 nozzle.json new file mode 100644 index 0000000000..f5889b1145 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @0.6 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido @0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI PLA Rapido", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.016" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json index 0f80b8075e..f2b961f821 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json @@ -23,7 +23,7 @@ "filament_settings_id": [ "QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle" ], - "from": "User", + "from": "system", "full_fan_speed_layer": [ "3" ], @@ -37,7 +37,7 @@ "is_custom_defined": "0", "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle", "nozzle_temperature": [ - "220" + "210" ], "pressure_advance": [ "0.042" diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json index 6830a7053d..9fde954540 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json @@ -23,7 +23,7 @@ "filament_settings_id": [ "QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "full_fan_speed_layer": [ "3" ], @@ -37,7 +37,7 @@ "is_custom_defined": "0", "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle", "nozzle_temperature": [ - "220" + "210" ], "pressure_advance": [ "0.042" diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json index 22eb83879d..f5fc9e3264 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json @@ -23,7 +23,7 @@ "filament_settings_id": [ "QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "full_fan_speed_layer": [ "3" ], diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json index 1f5a17c1b7..42df71e5e7 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json @@ -23,7 +23,7 @@ "filament_settings_id": [ "QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "full_fan_speed_layer": [ "3" ], diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.2 nozzle.json new file mode 100644 index 0000000000..b4da1cbf17 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido Matte @0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI PLA Rapido Matte", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.031" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.6 nozzle.json new file mode 100644 index 0000000000..b770f889a0 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.6 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido Matte @0.6 nozzle", + "from": "User", + "instantiation": "true", + "inherits": "QIDI PLA Rapido Matte", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.016" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "compatible_printers": [ + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.8 nozzle.json new file mode 100644 index 0000000000..c206d0e350 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @0.8 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido Matte @0.8 nozzle", + "from": "User", + "instantiation": "true", + "inherits": "QIDI PLA Rapido Matte", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.008" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json new file mode 100644 index 0000000000..56d802676f --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json @@ -0,0 +1,51 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_settings_id": [ + "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle" + ], + "from": "system", + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "QIDI PLA Rapido Matte", + "is_custom_defined": "0", + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle", + "nozzle_temperature": [ + "210" + ], + "pressure_advance": [ + "0.042" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..80dc5879bf --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,51 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "filament_settings_id": [ + "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle" + ], + "from": "system", + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "QIDI PLA Rapido Matte", + "is_custom_defined": "0", + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle", + "nozzle_temperature": [ + "210" + ], + "pressure_advance": [ + "0.042" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..472cde3a8c --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,51 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "filament_settings_id": [ + "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "QIDI PLA Rapido Matte", + "is_custom_defined": "0", + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle", + "nozzle_temperature": [ + "210" + ], + "pressure_advance": [ + "0.016" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..b73e847cc8 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,51 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "activate_air_filtration": [ + "1" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "24.5" + ], + "filament_settings_id": [ + "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle" + ], + "from": "system", + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "QIDI PLA Rapido Matte", + "is_custom_defined": "0", + "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "210" + ], + "pressure_advance": [ + "0.008" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte.json new file mode 100644 index 0000000000..578b18b1d8 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte.json @@ -0,0 +1,35 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido Matte", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.031" + ], + "filament_density":[ + "1.42" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido.json index 5b07e3e1f7..302d1c5bd4 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido.json @@ -27,12 +27,6 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle", - "Qidi X-Plus 0.6 nozzle", - "Qidi X-Max 0.6 nozzle", - "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle" + "Qidi X-Max 3 0.4 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @0.6 nozzle.json new file mode 100644 index 0000000000..dc30ce7db0 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @0.6 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "setting_id": "GFSL98", + "name": "QIDI PLA-CF @0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi PLA-CF", + "pressure_advance": [ + "0.01" + ], + "compatible_printers": [ + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @0.8 nozzle.json new file mode 100644 index 0000000000..6d1364ce44 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @0.8 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "setting_id": "GFSL98", + "name": "QIDI PLA-CF @0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi PLA-CF", + "pressure_advance": [ + "0.008" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000000..7b47a552f7 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,30 @@ +{"type": "filament", +"filament_id": "GFL98", +"setting_id": "GFSL98", +"instantiation": "true", + "extrusion_multiplier": [ + "0.93" + ], + "first_layer_temperature": [ + "220" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_settings_id": [ + "QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle" + ], + "from": "system", + "inherits": "Qidi PLA-CF", + "is_custom_defined": "0", + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle", + "nozzle_temperature": [ + "220" + ], + "pressure_advance": [ + "0.034" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000000..0fec335289 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,30 @@ +{"type": "filament", +"filament_id": "GFL98", +"setting_id": "GFSL98", +"instantiation": "true", + "extrusion_multiplier": [ + "0.93" + ], + "first_layer_temperature": [ + "220" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_settings_id": [ + "QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle" + ], + "from": "system", + "inherits": "Qidi PLA-CF", + "is_custom_defined": "0", + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle", + "nozzle_temperature": [ + "220" + ], + "pressure_advance": [ + "0.012" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..d0387282d7 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,30 @@ +{"type": "filament", +"filament_id": "GFL98", +"setting_id": "GFSL98", +"instantiation": "true", + "extrusion_multiplier": [ + "0.93" + ], + "first_layer_temperature": [ + "220" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_settings_id": [ + "QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle" + ], + "from": "system", + "inherits": "Qidi PLA-CF", + "is_custom_defined": "0", + "name": "QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "220" + ], + "pressure_advance": [ + "0.008" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json index df0aecfa32..2dae49d2a7 100644 --- a/resources/profiles/Qidi/filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json @@ -3,7 +3,7 @@ "setting_id": "GFSA04", "instantiation": "true", "activate_chamber_temp_control": [ - "1" + "0" ], "chamber_temperature": [ "60" @@ -14,7 +14,7 @@ "filament_settings_id": [ "Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "Qidi ASA-Aero", "is_custom_defined": "0", "name": "Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/Qidi ASA-Aero.json b/resources/profiles/Qidi/filament/Qidi ASA-Aero.json index b5464463c5..ca2c07fcf3 100644 --- a/resources/profiles/Qidi/filament/Qidi ASA-Aero.json +++ b/resources/profiles/Qidi/filament/Qidi ASA-Aero.json @@ -49,10 +49,22 @@ "0.021" ], "filament_retraction_length": [ - "0" + "0.01" ], - "filament_start_gcode": [ - "; filament start gcode\nM141 S60\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + "max_fan_speed":[ + "50" + ], + "min_fan_speed":[ + "10" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.03" + ], + "chamber_temperature": [ + "60" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -60,19 +72,7 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle", - "Qidi X-Max 0.6 nozzle", - "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", - "Qidi X-Plus 0.8 nozzle", - "Qidi X-Max 0.8 nozzle", - "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle", - "Qidi Q1 Pro 0.6 nozzle", - "Qidi Q1 Pro 0.8 nozzle" + "Qidi X-Max 3 0.4 nozzle" + ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json index 0f180e4026..4c43d6167e 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi Q1 Pro 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle.json index 678d0130fb..329a417ba5 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "90" ], diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle.json index 8ad2038b93..98639f2926 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "24.5" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi Q1 Pro 0.6 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle.json index afad4a341a..4b532fe90b 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "24.5" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi Q1 Pro 0.8 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json index 32292c6fe7..21a9b03ba0 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Max 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json index cdd8044ae4..805cfb1ae1 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json index 39fa925715..0eeacbf73e 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ABS", "filament_flow_ratio": [ - "0.926" + "0.95" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Smart 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS.json b/resources/profiles/Qidi/filament/Qidi Generic ABS.json index e3c944e825..cd4513a2bf 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS.json @@ -7,34 +7,50 @@ "instantiation": "true", "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.926" + "0.95" ], "filament_max_volumetric_speed": [ - "15" + "17" ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ "0.021" + ], + "max_fan_speed":[ + "80" + ], + "min_fan_speed":[ + "10" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_density":[ + "1.04" ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", "Qidi X-Plus 0.8 nozzle", "Qidi X-Max 0.8 nozzle", "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle" + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json index 072826e600..c07dae16b7 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json @@ -1,42 +1,24 @@ -{"type": "filament", -"filament_id": "GFB99", -"setting_id": "GFSA04", -"instantiation": "true", - "activate_chamber_temp_control": [ - "0" - ], - "chamber_temperature": [ - "55" - ], - "fan_cooling_layer_time": [ - "40" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_settings_id": [ - "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle" - ], - "from": "User", - "inherits": "Qidi Generic ASA", - "is_custom_defined": "0", +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", "name": "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle", - "nozzle_temperature": [ - "255" + "from": "system", + "instantiation": "true", + "inherits": "Qidi Generic ASA", + "filament_flow_ratio": [ + "0.92" ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "overhang_fan_speed": [ - "100" + "enable_pressure_advance": [ + "1" ], "pressure_advance": [ "0.021" ], - "slow_down_layer_time": [ - "4" + "filament_max_volumetric_speed": [ + "2" ], - "compatible_printers": [ - "Qidi Q1 Pro 0.2 nozzle" - ] + "compatible_printers": [ + "Qidi Q1 Pro 0.2 nozzle" + ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json index 3462157577..a068ae0603 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle.json @@ -17,12 +17,12 @@ "filament_settings_id": [ "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "Qidi Generic ASA", "is_custom_defined": "0", "name": "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle", "nozzle_temperature": [ - "255" + "270" ], "nozzle_temperature_initial_layer": [ "250" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json index d586d8187e..49485cc786 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "inherits": "Qidi Generic ASA", "is_custom_defined": "0", "name": "Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle", diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json index ed38ebb6f8..53c36fd95b 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "inherits": "Qidi Generic ASA", "is_custom_defined": "0", "name": "Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle", diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json index 0f60692f69..f6cd88e9e2 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ASA", "filament_flow_ratio": [ - "0.926" + "0.92" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Max 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json index d32e2c80c8..91ea783e3f 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ASA", "filament_flow_ratio": [ - "0.926" + "0.92" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json index 2e754bdb4b..1d2f9a7a44 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle.json @@ -5,9 +5,9 @@ "name": "Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_abs", + "inherits": "Qidi Generic ASA", "filament_flow_ratio": [ - "0.926" + "0.92" ], "enable_pressure_advance": [ "1" @@ -17,9 +17,6 @@ ], "filament_max_volumetric_speed": [ "2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Smart 3 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA.json b/resources/profiles/Qidi/filament/Qidi Generic ASA.json index eab6cf1e00..3181967e2a 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA.json @@ -7,13 +7,13 @@ "instantiation": "true", "inherits": "fdm_filament_asa", "filament_max_volumetric_speed": [ - "15" + "16" ], "filament_flow_ratio": [ - "0.926" + "0.92" ], "nozzle_temperature_initial_layer": [ - "270" + "250" ], "nozzle_temperature": [ "270" @@ -21,29 +21,36 @@ "enable_pressure_advance": [ "1" ], + "max_fan_speed":[ + "50" + ], + "min_fan_speed":[ + "10" + ], "pressure_advance": [ "0.021" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", "Qidi X-Plus 0.8 nozzle", "Qidi X-Max 0.8 nozzle", "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle" + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json index b939dc7680..3d64c5d792 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json @@ -16,19 +16,19 @@ "290" ], "filament_max_volumetric_speed": [ - "8" + "10" ], "fan_max_speed": [ - "30" + "40" ], "fan_min_speed": [ - "10" + "20" ], "overhang_fan_threshold": [ "0%" ], "overhang_fan_speed": [ - "40" + "100" ], "fan_cooling_layer_time": [ "5" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PA.json b/resources/profiles/Qidi/filament/Qidi Generic PA.json index 19e29799dd..d747a1b299 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PA.json @@ -10,22 +10,19 @@ "3" ], "nozzle_temperature_initial_layer": [ - "280" + "310" ], "nozzle_temperature": [ - "280" + "310" ], "filament_max_volumetric_speed": [ - "16" + "14" ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ - "0.03" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + "0.01" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/Qidi Generic PC.json b/resources/profiles/Qidi/filament/Qidi Generic PC.json index 8bab081a8c..5c5650e554 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PC.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PC.json @@ -7,13 +7,10 @@ "instantiation": "true", "inherits": "fdm_filament_pc", "filament_max_volumetric_speed": [ - "5" + "8" ], "filament_flow_ratio": [ - "0.94" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + "0.92" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json index b9c65494db..16bf02d8ec 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -28,10 +28,10 @@ "10" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json index 907a637ca3..b699fb1a4c 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,19 @@ -{ - "type": "filament", - "filament_id": "GFB99", - "setting_id": "GFSA04", - "instantiation": "true", +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", +"reduce_fan_stop_start_freq": [ + "1" +], +"slow_down_for_layer_cooling": [ + "1" +], +"fan_cooling_layer_time": [ + "30" +], +"overhang_fan_threshold": [ + "25%" +], "fan_max_speed": [ "40" ], @@ -12,7 +23,7 @@ "filament_settings_id": [ "Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp_initial_layer": [ "80" ], @@ -22,13 +33,25 @@ "overhang_fan_speed": [ "100" ], - "pressure_advance": [ - "0.04" - ], "slow_down_min_speed": [ "20" + ], + "slow_down_layer_time": [ + "12" +], + "pressure_advance":[ + "0.086" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "enable_pressure_advance": [ + "1" ], "compatible_printers": [ "Qidi Q1 Pro 0.4 nozzle" - ] -} \ No newline at end of file + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json index 26f3809524..bdf952339b 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -28,10 +28,10 @@ "10" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" @@ -43,7 +43,7 @@ "0.04" ], "filament_max_volumetric_speed": [ - "9" + "12" ], "compatible_printers": [ "Qidi Q1 Pro 0.6 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json index 628ba1a92f..bb48060f5e 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -28,10 +28,10 @@ "10" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" @@ -43,7 +43,7 @@ "0.04" ], "filament_max_volumetric_speed": [ - "9" + "12" ], "compatible_printers": [ "Qidi Q1 Pro 0.8 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle.json index 55acc65308..242c0f01f7 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -31,7 +31,7 @@ "10" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" @@ -40,7 +40,7 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle.json index bd7a5d17bd..d96fb21557 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -31,7 +31,7 @@ "10" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" @@ -40,7 +40,7 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle.json index 88e7d4a18f..98e60a99d1 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle.json @@ -5,7 +5,7 @@ "name": "Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pet", + "inherits": "Qidi Generic PETG", "reduce_fan_stop_start_freq": [ "1" ], @@ -16,7 +16,7 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -31,7 +31,7 @@ "10" ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" @@ -40,7 +40,7 @@ "1" ], "pressure_advance": [ - "0.05" + "0.04" ], "filament_max_volumetric_speed": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json index 45f2685624..f112205505 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json @@ -91,25 +91,33 @@ "0.05" ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", "Qidi X-Plus 0.8 nozzle", "Qidi X-Max 0.8 nozzle", "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi Q1 Pro 0.2 nozzle", "Qidi Q1 Pro 0.4 nozzle", "Qidi Q1 Pro 0.6 nozzle", - "sQidi Q1 Pro 0.8 nozzle" + "Qidi Q1 Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG.json b/resources/profiles/Qidi/filament/Qidi Generic PETG.json index 31f0e2acc5..f23903b871 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG.json @@ -16,52 +16,59 @@ "30" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" ], "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ "40" ], - "slow_down_min_speed": [ + "fan_min_speed": [ "10" ], + "slow_down_min_speed": [ + "20" + ], "slow_down_layer_time": [ - "8" + "12" ], "filament_flow_ratio": [ "0.95" ], "filament_max_volumetric_speed": [ - "9" + "12" ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ - "0.042" + "0.04" + ], + "filament_density":[ + "1.27" ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", - "Qidi X-Plus 0.8 nozzle", - "Qidi X-Max 0.8 nozzle", - "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle" + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json index a45234ae21..8a7d1c3ae9 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" @@ -19,7 +19,7 @@ "0.042" ], "filament_max_volumetric_speed": [ - "2" + "14" ], "compatible_printers": [ "Qidi Q1 Pro 0.2 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json index 87d3bece30..4a87b977dc 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle.json @@ -8,9 +8,9 @@ "filament_settings_id": [ "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "full_fan_speed_layer": [ - "3" + "0" ], "hot_plate_temp": [ "60" @@ -22,7 +22,7 @@ "is_custom_defined": "0", "name": "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle", "nozzle_temperature": [ - "220" + "210" ], "slow_down_min_speed": [ "20" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json index 59b31e5f01..6668f94448 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json index 979091ebad..b25ce10154 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle.json index eac3229bde..78a3483c14 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle.json index 0c73db382a..75e046ea47 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle.json index 21c563ab66..b593ed0f3b 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle.json @@ -5,12 +5,12 @@ "name": "Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_filament_pla", + "inherits": "Qidi Generic PLA", "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ - "5" + "8" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json b/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json index d9287994ef..e99189fd80 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json @@ -6,42 +6,60 @@ "from": "system", "instantiation": "true", "inherits": "fdm_filament_pla", + "enable_pressure_advance":"1", + "pressure_advance": [ + "0.032" + ], + "nozzle_temperature_initial_layer":[ + "220" + ], "filament_max_volumetric_speed": [ - "12" + "7.5" ], "filament_retraction_length": [ "0.5" ], + "filament_flow_ratio": [ "0.98" ], "slow_down_layer_time": [ "8" ], + "hot_plate_temp_initial_layer" : [ + "55" + ], + "hot_plate_temp" : [ + "55" + ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", - "Qidi X-Plus 0.8 nozzle", - "Qidi X-Max 0.8 nozzle", - "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle", - "Qidi X-Smart 3 0.2 nozzle", - "Qidi X-Plus 3 0.2 nozzle", - "Qidi X-Max 3 0.2 nozzle", - "Qidi Q1 Pro 0.2 nozzle", - "Qidi Q1 Pro 0.4 nozzle", - "Qidi Q1 Pro 0.6 nozzle", - "Qidi Q1 Pro 0.8 nozzle" + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi Q1 Pro 0.2 nozzle", + "Qidi Q1 Pro 0.4 nozzle", + "Qidi Q1 Pro 0.6 nozzle", + "Qidi Q1 Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json index 4989e95f0c..c1cf194a38 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json @@ -10,16 +10,16 @@ "40" ], "filament_flow_ratio": [ - "0.95" + "0.96" ], "filament_type": [ "PLA-CF" ], "filament_max_volumetric_speed": [ - "12" + "9" ], "slow_down_layer_time": [ - "7" + "8" ], "additional_cooling_fan_speed": [ "0" @@ -33,35 +33,34 @@ "nozzle_temperature_range_high": [ "240" ], - "nozzle_temperature": [ - "230" - ], - "enable_pressure_advance": [ - "1" - ], - "pressure_advance": [ - "0.031" - ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", - "Qidi X-Plus 0.8 nozzle", - "Qidi X-Max 0.8 nozzle", - "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle", - "Qidi Q1 Pro 0.4 nozzle", - "Qidi Q1 Pro 0.6 nozzle", - "Qidi Q1 Pro 0.8 nozzle" + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi Q1 Pro 0.2 nozzle", + "Qidi Q1 Pro 0.4 nozzle", + "Qidi Q1 Pro 0.6 nozzle", + "Qidi Q1 Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA.json b/resources/profiles/Qidi/filament/Qidi Generic PLA.json index 4068d39487..ebcf828405 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA.json @@ -1,16 +1,16 @@ { "type": "filament", - "filament_id": "GFL99", + "filament_id": "GFL99", "setting_id": "GFSL99", "name": "Qidi Generic PLA", "from": "system", "instantiation": "true", "inherits": "fdm_filament_pla", - "filament_flow_ratio": [ + "filament_flow_ratio": [ "0.98" ], "filament_max_volumetric_speed": [ - "12" + "14" ], "slow_down_layer_time": [ "8" @@ -19,25 +19,29 @@ "1" ], "pressure_advance": [ - "0.032" + "0.031" ], - "compatible_printers": [ + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", "Qidi X-Plus 0.8 nozzle", "Qidi X-Max 0.8 nozzle", "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle" - ] -} \ No newline at end of file + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi Generic PVA.json b/resources/profiles/Qidi/filament/Qidi Generic PVA.json index ca1b3c2bcc..93bb0e381a 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PVA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PVA.json @@ -19,29 +19,33 @@ "10" ], "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle", "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", "Qidi X-Max 0.6 nozzle", "Qidi X-CF Pro 0.6 nozzle", - "Qidi X-Smart 3 0.6 nozzle", - "Qidi X-Plus 3 0.6 nozzle", - "Qidi X-Max 3 0.6 nozzle", - "Qidi X-Plus 0.8 nozzle", - "Qidi X-Max 0.8 nozzle", - "Qidi X-CF Pro 0.8 nozzle", - "Qidi X-Smart 3 0.8 nozzle", - "Qidi X-Plus 3 0.8 nozzle", - "Qidi X-Max 3 0.8 nozzle", - "Qidi X-Smart 3 0.2 nozzle", - "Qidi X-Plus 3 0.2 nozzle", - "Qidi X-Max 3 0.2 nozzle", - "Qidi Q1 Pro 0.2 nozzle", - "Qidi Q1 Pro 0.4 nozzle", - "Qidi Q1 Pro 0.6 nozzle", - "Qidi Q1 Pro 0.8 nozzle" + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi Q1 Pro 0.2 nozzle", + "Qidi Q1 Pro 0.4 nozzle", + "Qidi Q1 Pro 0.6 nozzle", + "Qidi Q1 Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000000..3f5a9bc852 --- /dev/null +++ b/resources/profiles/Qidi/filament/Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,39 @@ +{"type": "filament", +"filament_id": "GFB99", +"setting_id": "GFSA04", +"instantiation": "true", + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_settings_id": [ + "Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle" + ], + "from": "system", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "inherits": "Qidi Generic TPU 95A", + "is_custom_defined": "0", + "name": "Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "compatible_printers": [ + "Qidi Q1 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json b/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json new file mode 100644 index 0000000000..b27676fa35 --- /dev/null +++ b/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSR99", + "name": "Qidi Generic TPU 95A", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "4" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "1" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi Q1 Pro 0.4 nozzle", + "Qidi Q1 Pro 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json index 6d0e15e2a0..a64de438a1 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "inherits": "Qidi Generic TPU", "is_custom_defined": "0", "name": "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle", @@ -19,7 +19,7 @@ "230" ], "nozzle_temperature_initial_layer": [ - "220" + "230" ], "compatible_printers": [ diff --git a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json index 84a25b23ce..1bc87b6bc3 100644 --- a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], @@ -31,7 +31,7 @@ "250" ], "pressure_advance": [ - "0.082" + "0.04" ], "slow_down_layer_time": [ "4" diff --git a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.6 nozzle.json index 6416f28ace..2db0187cc3 100644 --- a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.6 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "Qidi PC-ABS-FR @Qidi Q1 Pro 0.6 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle.json index 8d7927f985..db1e75811b 100644 --- a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle.json @@ -17,7 +17,7 @@ "filament_settings_id": [ "Qidi PC-ABS-FR @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "100" ], @@ -31,7 +31,7 @@ "250" ], "pressure_advance": [ - "0.082" + "0.04" ], "slow_down_layer_time": [ "4" diff --git a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR.json b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR.json index 4098bb90e2..b5f8921369 100644 --- a/resources/profiles/Qidi/filament/Qidi PC-ABS-FR.json +++ b/resources/profiles/Qidi/filament/Qidi PC-ABS-FR.json @@ -21,8 +21,26 @@ "overhang_fan_speed": [ "60" ], - "filament_start_gcode": [ - "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + "max_fan_speed":[ + "40" + ], + "min_fan_speed":[ + "10" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "slow_down_layer_time": [ + "4" + ], + "filament_density":[ + "1.19" + ], + "chamber_temperature": [ + "55" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/Qidi PLA-CF.json b/resources/profiles/Qidi/filament/Qidi PLA-CF.json new file mode 100644 index 0000000000..dda26e182f --- /dev/null +++ b/resources/profiles/Qidi/filament/Qidi PLA-CF.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "setting_id": "GFSL98", + "name": "Qidi PLA-CF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "temperature": [ + "230" + ], + "first_layer_temperature": [ + "230" + ], + "filament_density": [ + "1.25" + ], + "extrusion_multiplier": [ + "0.96" + ], + "advance_pressure": [ + "0.02" + ], + + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json index f7468558ec..91a4c272c5 100644 --- a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "60" ], @@ -22,10 +22,10 @@ "is_custom_defined": "0", "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle", "nozzle_temperature": [ - "250" + "230" ], "nozzle_temperature_initial_layer": [ - "220" + "230" ], "compatible_printers": [ "Qidi Q1 Pro 0.4 nozzle" diff --git a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json index a9d22a8ccb..b92f99f0ac 100644 --- a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json @@ -11,7 +11,7 @@ "filament_settings_id": [ "Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle" ], - "from": "User", + "from": "system", "hot_plate_temp": [ "60" ], @@ -22,10 +22,10 @@ "is_custom_defined": "0", "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle", "nozzle_temperature": [ - "250" + "230" ], "nozzle_temperature_initial_layer": [ - "220" + "230" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json index 99c6387226..c17dcfb87a 100644 --- a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json +++ b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json @@ -7,7 +7,7 @@ "instantiation": "true", "inherits": "fdm_filament_tpu", "filament_max_volumetric_speed": [ - "6" + "4" ], "enable_pressure_advance": [ "1" diff --git a/resources/profiles/Qidi/filament/fdm_filament_abs.json b/resources/profiles/Qidi/filament/fdm_filament_abs.json index ed997e0881..0a2551e03b 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_abs.json +++ b/resources/profiles/Qidi/filament/fdm_filament_abs.json @@ -5,28 +5,28 @@ "instantiation": "false", "inherits": "fdm_filament_common", "cool_plate_temp" : [ - "95" + "90" ], "eng_plate_temp" : [ - "95" + "90" ], "hot_plate_temp" : [ - "95" + "90" ], "textured_plate_temp" : [ - "95" + "90" ], "cool_plate_temp_initial_layer" : [ - "95" + "90" ], "eng_plate_temp_initial_layer" : [ - "95" + "90" ], "hot_plate_temp_initial_layer" : [ - "95" + "90" ], "textured_plate_temp_initial_layer" : [ - "95" + "90" ], "slow_down_for_layer_cooling": [ "1" @@ -38,13 +38,13 @@ "30" ], "filament_max_volumetric_speed": [ - "15" + "20" ], "filament_type": [ "ABS" ], "filament_density": [ - "1.04" + "1.24" ], "filament_cost": [ "20" @@ -83,6 +83,6 @@ "10" ], "slow_down_layer_time": [ - "5" + "4" ] } diff --git a/resources/profiles/Qidi/filament/fdm_filament_common.json b/resources/profiles/Qidi/filament/fdm_filament_common.json index ec1a0103f5..d04f771b95 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_common.json +++ b/resources/profiles/Qidi/filament/fdm_filament_common.json @@ -129,16 +129,20 @@ "slow_down_layer_time": [ "8" ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \nM106 P3 S0" - ], "nozzle_temperature": [ "200" ], "temperature_vitrification": [ "100" - ] + ], + "during_print_exhaust_fan_speed":[ + "100" + ], + "activate_air_filtration":[ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "compatible_printers": [] } diff --git a/resources/profiles/Qidi/filament/fdm_filament_pla.json b/resources/profiles/Qidi/filament/fdm_filament_pla.json index 6e162b00f9..24bbf363bf 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_pla.json +++ b/resources/profiles/Qidi/filament/fdm_filament_pla.json @@ -20,28 +20,28 @@ "20" ], "cool_plate_temp" : [ - "55" + "60" ], "eng_plate_temp" : [ - "55" + "60" ], "hot_plate_temp" : [ - "55" + "60" ], "textured_plate_temp" : [ - "55" + "60" ], "cool_plate_temp_initial_layer" : [ - "55" + "60" ], "eng_plate_temp_initial_layer" : [ - "55" + "60" ], "hot_plate_temp_initial_layer" : [ - "55" + "60" ], "textured_plate_temp_initial_layer" : [ - "55" + "60" ], "nozzle_temperature_initial_layer": [ "210" @@ -68,7 +68,7 @@ "2" ], "full_fan_speed_layer": [ - "4" + "0" ], "nozzle_temperature": [ "220" @@ -83,10 +83,10 @@ "230" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ - "4" + "8" ], "additional_cooling_fan_speed": [ "0" diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json index 41e53258ef..3d315713fb 100644 --- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi Q1 Pro", "printer_variant": "0.2", "default_filament_profile": [ - "QIDI PLA Rapido;QIDI PETG;QIDI ABS Rapido" + "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @Qidi Q1 Pro 0.2 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json index 52709182de..22fc68b7ff 100644 --- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json @@ -27,13 +27,13 @@ "245x245", "208x245" ], - "printable_height": "245", + "printable_height": "240", "nozzle_type": "hardened_steel", "max_layer_height": [ - "0.3" + "0.28" ], "min_layer_height": [ - "0.07" + "0.08" ], "printer_settings_id": "Qidi", "retraction_minimum_travel": [ @@ -43,7 +43,7 @@ "0.8" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" @@ -65,6 +65,6 @@ "machine_start_gcode": "PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[chamber_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600", "thumbnails_format": "PNG", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json index 1bfefcd782..d54f5ec513 100644 --- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi Q1 Pro", "printer_variant": "0.6", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle" ], "default_print_profile": "0.30mm Standard @Qidi Q1 Pro 0.6 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json index 397df43462..d6c7a27798 100644 --- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi Q1 Pro", "printer_variant": "0.8", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle" ], "default_print_profile": "0.40mm Standard @Qidi Q1 Pro 0.8 nozzle", "max_layer_height": [ @@ -21,7 +21,7 @@ "0.16" ], "retract_length_toolchange": [ - "3" + "10" ], "retraction_length": [ "3" diff --git a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json index 62a6acc62c..d869a61f6b 100644 --- a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json @@ -89,7 +89,7 @@ "2" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" @@ -100,7 +100,7 @@ "default_filament_profile": [ "Qidi Generic PLA" ], - "machine_start_gcode": "G28\nG92 E0\nG0 X5 Y5 Z0.3 F3600\n", + "machine_start_gcode": "G28\nM140 S[hot_plate_temp_initial_layer]\nM190 S[hot_plate_temp_initial_layer]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n", "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n", "scan_first_layer": "0" } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json index 2505730d9e..0a04225405 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json @@ -89,7 +89,7 @@ "2" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json index 8921e1cc41..4915207a68 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Max 3", "printer_variant": "0.2", "default_filament_profile": [ - "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + "Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @Qidi XMax3 0.2 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json index e22bca8b0e..6d15b376e0 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json @@ -21,20 +21,20 @@ "nozzle_type": "hardened_steel", "auxiliary_fan": "1", "max_layer_height": [ - "0.32" + "0.28" ], "min_layer_height": [ - "0.07" + "0.08" ], "printer_settings_id": "Qidi", "retraction_minimum_travel": [ "1" ], "retraction_length": [ - "0.8" + "1" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" @@ -43,6 +43,6 @@ "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json index 5f167207b6..566afbb4f7 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Max 3", "printer_variant": "0.6", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.30mm Standard @Qidi XMax3 0.6 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json index f2b9122af1..335d5c9168 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Max 3", "printer_variant": "0.8", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.40mm Standard @Qidi XMax3 0.8 nozzle", "max_layer_height": [ @@ -21,7 +21,7 @@ "0.16" ], "retract_length_toolchange": [ - "3" + "10" ], "retraction_length": [ "3" diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json index c722d7ca34..ce361e8f2c 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json @@ -89,7 +89,7 @@ "2" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json index c29bdd6655..9f56f59c1e 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Plus 3", "printer_variant": "0.2", "default_filament_profile": [ - "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + "Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @Qidi XPlus3 0.2 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json index c63f6028a5..199f9a9430 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json @@ -20,20 +20,20 @@ "printable_height": "270", "nozzle_type": "hardened_steel", "max_layer_height": [ - "0.3" + "0.28" ], "min_layer_height": [ - "0.07" + "0.08" ], "printer_settings_id": "Qidi", "retraction_minimum_travel": [ "1" ], "retraction_length": [ - "0.8" + "1" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" @@ -42,6 +42,6 @@ "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json index d635074a5b..90dd0d1cde 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Plus 3", "printer_variant": "0.6", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.30mm Standard @Qidi XPlus3 0.6 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json index 5b51b03bf9..6e97b82248 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Plus 3", "printer_variant": "0.8", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.40mm Standard @Qidi XPlus3 0.8 nozzle", "max_layer_height": [ @@ -21,7 +21,7 @@ "0.16" ], "retract_length_toolchange": [ - "3" + "10" ], "retraction_length": [ "3" diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json index 059c5aeacd..2c29bd399f 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Smart 3", "printer_variant": "0.2", "default_filament_profile": [ - "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + "Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle" ], "default_print_profile": "0.10mm Standard @Qidi XSmart3 0.2 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json index c923615783..a11de84792 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json @@ -34,7 +34,7 @@ "0.8" ], "retract_length_toolchange": [ - "10" + "2" ], "deretraction_speed": [ "0" @@ -43,6 +43,6 @@ "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json index 1902dc1898..f2b95c9740 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Smart 3", "printer_variant": "0.6", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.30mm Standard @Qidi XSmart3 0.6 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json index 7e7cfa7a11..6c56efc5df 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json @@ -11,7 +11,7 @@ "printer_model": "Qidi X-Smart 3", "printer_variant": "0.8", "default_filament_profile": [ - "QIDI PLA Rapido" + "Qidi Generic PLA" ], "default_print_profile": "0.40mm Standard @Qidi XSmart3 0.8 nozzle", "max_layer_height": [ diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json index b81b6b2a41..94bcd6b7e5 100644 --- a/resources/profiles/Qidi/machine/fdm_machine_common.json +++ b/resources/profiles/Qidi/machine/fdm_machine_common.json @@ -8,7 +8,7 @@ "40" ], "extruder_colour": [ - "#FCE94F" + "" ], "extruder_offset": [ "0x0" @@ -64,7 +64,7 @@ "0" ], "max_layer_height": [ - "0.32" + "0.28" ], "min_layer_height": [ "0.08" @@ -79,19 +79,19 @@ "printer_settings_id": "", "printer_variant": "0.4", "retraction_minimum_travel": [ - "2" + "1" ], "retract_before_wipe": [ - "70%" + "0%" ], "retract_when_changing_layer": [ "1" ], "retraction_length": [ - "5" + "1" ], "retract_length_toolchange": [ - "1" + "2" ], "z_hop": [ "0" @@ -103,7 +103,7 @@ "0" ], "retraction_speed": [ - "60" + "30" ], "single_extruder_multi_material": "0", "change_filament_gcode": "", @@ -111,7 +111,7 @@ "1" ], "z_lift_type": "NormalLift", - "default_print_profile": "0.20mm Standard @Qidi XMax3", + "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600", "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0" diff --git a/resources/profiles/Qidi/process/fdm_process_common.json b/resources/profiles/Qidi/process/fdm_process_common.json index 779c5b1ddf..8da0fd26b7 100644 --- a/resources/profiles/Qidi/process/fdm_process_common.json +++ b/resources/profiles/Qidi/process/fdm_process_common.json @@ -13,7 +13,7 @@ "default_acceleration": "10000", "bridge_no_support": "0", "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", + "outer_wall_line_width": "0.42", "outer_wall_speed": "120", "line_width": "0.45", "infill_direction": "45", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json index 686376d56a..c5eb0d7061 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -85,7 +85,7 @@ "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_expansion": "0", + "support_expansion":"0", "support_interface_speed": "80", "support_base_pattern": "default", "support_base_pattern_spacing": "2.5", @@ -94,16 +94,16 @@ "support_object_xy_distance": "0.35", "tree_support_branch_diameter": "2", "tree_support_branch_angle": "45", - "tree_support_wall_count": "1", - "detect_thin_wall": "1", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.42", "top_surface_acceleration": "2000", "top_surface_speed": "200", - "top_shell_layers": "4", + "top_shell_layers": "3", "top_shell_thickness": "0.8", "travel_speed": "500", - "enable_prime_tower": "0", + "enable_prime_tower": "1", "independent_support_layer_height": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "35", @@ -115,6 +115,6 @@ "internal_solid_infill_pattern": "monotonic", "initial_layer_travel_speed": "50%", "filter_out_gap_fill": "2", - "notes": "", + "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n {% set s = params.S|float %}\n {% if s == 0 %}\n # If target temperature is 0, do nothing\n M117 Chamber heating cancelled\n {% else %}\n SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n M140 S90\n TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n M117 Chamber at target temperature\n {% endif %}", "exclude_object": "1" } diff --git a/resources/profiles/Qidi/qidi_xmax3_buildplate_model.stl b/resources/profiles/Qidi/qidi_xmax3_buildplate_model.stl index f6ea715fd7..ee8fc101a4 100644 Binary files a/resources/profiles/Qidi/qidi_xmax3_buildplate_model.stl and b/resources/profiles/Qidi/qidi_xmax3_buildplate_model.stl differ diff --git a/resources/profiles/Qidi/qidi_xplus3_buildplate_model.stl b/resources/profiles/Qidi/qidi_xplus3_buildplate_model.stl index 4e726f6d48..6371cee8d5 100644 Binary files a/resources/profiles/Qidi/qidi_xplus3_buildplate_model.stl and b/resources/profiles/Qidi/qidi_xplus3_buildplate_model.stl differ diff --git a/resources/profiles/Qidi/qidi_xsmart3_buildplate_model.stl b/resources/profiles/Qidi/qidi_xsmart3_buildplate_model.stl index b7028a5e94..6215174913 100644 Binary files a/resources/profiles/Qidi/qidi_xsmart3_buildplate_model.stl and b/resources/profiles/Qidi/qidi_xsmart3_buildplate_model.stl differ