mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-07-20 13:17:54 -06:00
General improvments to RatRig V-Core 4 & V-Core 4 HYBRID (#5966)
Resolves #5932
**The following changes made are made to all V-Core 4 versions**
- Improved cover's quality
- Added RatRig's PunkFil ABS, PETG, and PETG CF filaments
- Added PETG-CF10 filament type & RatRig to filament vendors
- Increased max z speed to 200 from 50 and max acceleration travel to
10,000 from 9,000
- Enabled wipe and z hop, as well as, increased retract before wipe to
70% from 0%
- Improved layer change G-Code
- Fixed pause G-Code
- Added extruder clearance parameters
*Almost all of these changes come from @nameisCruzCruz in #5932
This commit is contained in:
SoftFever
GitHub
commit
89d04ab9e9
30 changed files with 525 additions and 132 deletions
|
|
@ -235,6 +235,18 @@
|
|||
{
|
||||
"name": "RatRig Generic PA-CF",
|
||||
"sub_path": "filament/RatRig Generic PA-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "RatRig PunkFil ABS",
|
||||
"sub_path": "filament/RatRig PunkFil ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "RatRig PunkFil PETG CF",
|
||||
"sub_path": "filament/RatRig PunkFil PETG CF.json"
|
||||
},
|
||||
{
|
||||
"name": "RatRig PunkFil PETG",
|
||||
"sub_path": "filament/RatRig PunkFil PETG.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 17 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 17 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 17 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 18 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 18 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 15 KiB After Width: | Height: | Size: 18 KiB |
96
resources/profiles/Ratrig/filament/RatRig PunkFil ABS.json
Normal file
96
resources/profiles/Ratrig/filament/RatRig PunkFil ABS.json
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB99",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "RatRig PunkFil ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"hot_plate_temp_initial_layer" : [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp" : [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"RatRig"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"RatRig V-Core 3 200 0.4 nozzle",
|
||||
"RatRig V-Core 3 300 0.4 nozzle",
|
||||
"RatRig V-Core 3 400 0.4 nozzle",
|
||||
"RatRig V-Core 3 500 0.4 nozzle",
|
||||
"RatRig V-Minion 0.4 nozzle",
|
||||
"RatRig V-Cast 0.4 nozzle",
|
||||
"RatRig V-Cast 0.6 nozzle",
|
||||
"RatRig V-Core 4 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 500 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
@ -0,0 +1,99 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB99",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "RatRig PunkFil PETG CF",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.038"
|
||||
],
|
||||
"hot_plate_temp_initial_layer" : [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp" : [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"48"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG-CF10"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"RatRig"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"RatRig V-Core 3 200 0.4 nozzle",
|
||||
"RatRig V-Core 3 300 0.4 nozzle",
|
||||
"RatRig V-Core 3 400 0.4 nozzle",
|
||||
"RatRig V-Core 3 500 0.4 nozzle",
|
||||
"RatRig V-Minion 0.4 nozzle",
|
||||
"RatRig V-Cast 0.4 nozzle",
|
||||
"RatRig V-Cast 0.6 nozzle",
|
||||
"RatRig V-Core 4 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 500 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
96
resources/profiles/Ratrig/filament/RatRig PunkFil PETG.json
Normal file
96
resources/profiles/Ratrig/filament/RatRig PunkFil PETG.json
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB99",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "RatRig PunkFil PETG",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
],
|
||||
"hot_plate_temp_initial_layer" : [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp" : [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"RatRig"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"RatRig V-Core 3 200 0.4 nozzle",
|
||||
"RatRig V-Core 3 300 0.4 nozzle",
|
||||
"RatRig V-Core 3 400 0.4 nozzle",
|
||||
"RatRig V-Core 3 500 0.4 nozzle",
|
||||
"RatRig V-Minion 0.4 nozzle",
|
||||
"RatRig V-Cast 0.4 nozzle",
|
||||
"RatRig V-Cast 0.6 nozzle",
|
||||
"RatRig V-Core 4 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.4 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.4 nozzle",
|
||||
"RatRig V-Core 4 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.5 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.5 nozzle",
|
||||
"RatRig V-Core 4 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 500 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 300 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 400 0.6 nozzle",
|
||||
"RatRig V-Core 4 HYBRID 500 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,23 +26,28 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,23 +26,28 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,23 +26,28 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,25 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,25 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,26 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["2"],
|
||||
"retraction_speed": ["40"],
|
||||
"deretraction_speed": ["0"],
|
||||
"retraction_minimum_travel": ["2"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,25 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,25 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.25"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
],
|
||||
"machine_max_speed_x": ["400", "400"],
|
||||
"machine_max_speed_y": ["400", "400"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["10000", "10000"],
|
||||
"machine_max_acceleration_y": ["10000", "10000"],
|
||||
|
|
@ -26,25 +26,30 @@
|
|||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["10000", "10000"],
|
||||
"machine_max_acceleration_retracting": ["10000", "10000"],
|
||||
"machine_max_acceleration_travel": ["10000", "10000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
"64x64/PNG",
|
||||
"400x300/PNG"
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "300",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "400",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.06"],
|
||||
"max_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.2"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.25"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -18,31 +18,36 @@
|
|||
],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["50", "50"],
|
||||
"machine_max_speed_z": ["200", "200"],
|
||||
"machine_max_speed_e": ["120", "120"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["200", "200"],
|
||||
"machine_max_acceleration_e": ["20000", "20000"],
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["20000", "20000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_jerk_x": ["5", "5"],
|
||||
"machine_max_jerk_y": ["5", "5"],
|
||||
"machine_max_jerk_z": ["0.4", "0.4"],
|
||||
"machine_max_jerk_e": ["5", "5"],
|
||||
"min_layer_height": ["0.1"],
|
||||
"max_layer_height": ["0.4"],
|
||||
"extruder_clearance_radius": "45",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"retract_lift_below": ["0.3"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_speed": ["120"],
|
||||
"deretraction_speed": ["120"],
|
||||
"wipe": ["0"],
|
||||
"retract_before_wipe": ["0%"],
|
||||
"wipe": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"z_hop": ["0.2"],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"before_layer_change_gcode": ";[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
||||
"printable_height": "500",
|
||||
"thumbnails": [
|
||||
|
|
|
|||
|
|
@ -2125,6 +2125,7 @@ void PrintConfigDef::init_fff_params()
|
|||
def->enum_values.push_back("PET-CF");
|
||||
def->enum_values.push_back("PETG");
|
||||
def->enum_values.push_back("PETG-CF");
|
||||
def->enum_values.push_back("PETG-CF10");
|
||||
def->enum_values.push_back("PHA");
|
||||
def->enum_values.push_back("PLA");
|
||||
def->enum_values.push_back("PLA-AERO");
|
||||
|
|
|
|||
|
|
@ -53,14 +53,14 @@ static const std::vector<std::string> filament_vendors =
|
|||
"Kexcelled", "MakerBot", "MatterHackers", "MIKA3D", "NinjaTek",
|
||||
"Nobufil", "Novamaker", "OVERTURE", "OVVNYXE", "Polymaker",
|
||||
"Priline", "Printed Solid", "Protopasta", "Prusament", "Push Plastic",
|
||||
"R3D", "Re-pet3D", "Recreus", "Regen", "Sain SMART",
|
||||
"SliceWorx", "Snapmaker", "SnoLabs", "Spectrum", "SUNLU",
|
||||
"TTYT3D", "Tianse", "UltiMaker", "Valment", "Verbatim",
|
||||
"VO3D", "Voxelab", "VOXELPLA", "YOOPAI", "Yousu",
|
||||
"Ziro", "Zyltech"};
|
||||
"R3D", "Re-pet3D", "Recreus", "Regen", "RatRig",
|
||||
"Sain SMART", "SliceWorx", "Snapmaker", "SnoLabs", "Spectrum",
|
||||
"SUNLU", "TTYT3D", "Tianse", "UltiMaker", "Valment",
|
||||
"Verbatim", "VO3D", "Voxelab", "VOXELPLA", "YOOPAI",
|
||||
"Yousu", "Ziro", "Zyltech"};
|
||||
|
||||
static const std::vector<std::string> filament_types = {"PLA", "rPLA", "PLA+", "PLA Tough", "PETG", "ABS", "ASA", "FLEX", "HIPS", "PA", "PACF",
|
||||
"NYLON", "PVA", "PVB", "PC", "PCABS", "PCTG", "PCCF", "PHA", "PP", "PEI", "PET", "PETG",
|
||||
"NYLON", "PVA", "PVB", "PC", "PCABS", "PCTG", "PCCF", "PHA", "PP", "PEI", "PET",
|
||||
"PETGCF", "PTBA", "PTBA90A", "PEEK", "TPU93A", "TPU75D", "TPU", "TPU92A", "TPU98A", "Misc",
|
||||
"TPE", "GLAZE", "Nylon", "CPE", "METAL", "ABST", "Carbon Fiber", "SBS"};
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue