diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 9425300cb4..fdc096c888 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1405,6 +1405,10 @@ "name": "Generic PLA-CF @base", "sub_path": "filament/Generic PLA-CF @base.json" }, + { + "name": "Numakers PLA+ @base", + "sub_path": "filament/Numakers/Numakers PLA+ @base.json" + }, { "name": "Overture Matte PLA @base", "sub_path": "filament/Overture/Overture Matte PLA @base.json" @@ -1458,12 +1462,12 @@ "sub_path": "filament/Polymaker/Panchroma PLA Neon @base.json" }, { - "name": "Panchroma PLA Silk @base", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @base.json" + "name": "Panchroma PLA Satin @base", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @base.json" }, { - "name": "Panchroma PLA Stain @base", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @base.json" + "name": "Panchroma PLA Silk @base", + "sub_path": "filament/Polymaker/Panchroma PLA Silk @base.json" }, { "name": "Panchroma PLA Starlight @base", @@ -5101,6 +5105,42 @@ "name": "Generic PLA-CF @BBL P2S", "sub_path": "filament/Generic PLA-CF @BBL P2S.json" }, + { + "name": "Numakers PLA+ @BBL A1", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json" + }, + { + "name": "Numakers PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL A1M", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M.json" + }, + { + "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL P1P", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P.json" + }, + { + "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL X1", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1.json" + }, + { + "name": "Numakers PLA+ @BBL X1C", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C.json" + }, + { + "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Matte PLA @BBL A1", "sub_path": "filament/Overture/Overture Matte PLA @BBL A1.json" @@ -5641,6 +5681,46 @@ "name": "Panchroma PLA Neon @BBL X1C 0.2 nozzle", "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json" }, + { + "name": "Panchroma PLA Satin @BBL A1", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1M", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1M.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL P1P", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL P1P.json" + }, + { + "name": "Panchroma PLA Satin @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1C", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1C.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json" + }, { "name": "Panchroma PLA Silk @BBL A1", "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL A1.json" @@ -5677,46 +5757,6 @@ "name": "Panchroma PLA Silk @BBL X1C", "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json" }, - { - "name": "Panchroma PLA Stain @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL A1.json" - }, - { - "name": "Panchroma PLA Stain @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Stain @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL A1M.json" - }, - { - "name": "Panchroma PLA Stain @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Stain @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL P1P.json" - }, - { - "name": "Panchroma PLA Stain @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Stain @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL X1.json" - }, - { - "name": "Panchroma PLA Stain @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Stain @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL X1C.json" - }, - { - "name": "Panchroma PLA Stain @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @BBL X1C 0.2 nozzle.json" - }, { "name": "Panchroma PLA Starlight @BBL A1", "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json" @@ -7661,46 +7701,6 @@ "name": "Overture TPU @BBL X1C 0.2 nozzle", "sub_path": "filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json" }, - { - "name": "Numakers PLA+ @base", - "sub_path": "filament/Numakers/Numakers PLA+ @base.json" - }, - { - "name": "Numakers PLA+ @BBL A1", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json" - }, - { - "name": "Numakers PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL A1M", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M.json" - }, - { - "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL P1P", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P.json" - }, - { - "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL X1", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1.json" - }, - { - "name": "Numakers PLA+ @BBL X1C", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C.json" - }, - { - "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json" - }, { "name": "fdm_filament_dual_common", "sub_path": "filament/fdm_filament_dual_common.json" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json similarity index 74% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1 0.2 nozzle.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json index 1db86a72e8..886b3217cc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL A1 0.2 nozzle", + "renamed_from": "Panchroma PLA Stain @BBL A1 0.2 nozzle", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_01", "instantiation": "true", @@ -26,4 +27,4 @@ "slow_down_layer_time": [ "5" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json similarity index 79% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json index 6f573a8f19..93520a1eda 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL A1", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL A1", + "renamed_from": "Panchroma PLA Stain @BBL A1", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_00", "instantiation": "true", @@ -28,4 +29,4 @@ "slow_down_layer_time": [ "5" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json similarity index 74% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M 0.2 nozzle.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json index 7510aa9ebf..b6689b1ee8 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL A1M 0.2 nozzle", + "renamed_from": "Panchroma PLA Stain @BBL A1M 0.2 nozzle", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_03", "instantiation": "true", @@ -26,4 +27,4 @@ "slow_down_layer_time": [ "5" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json similarity index 79% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json index 620a76ffe4..800a4bb8bc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL A1M.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL A1M", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL A1M", + "renamed_from": "Panchroma PLA Stain @BBL A1M", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_02", "instantiation": "true", @@ -28,4 +29,4 @@ "slow_down_layer_time": [ "5" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json similarity index 74% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P 0.2 nozzle.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json index 00cf4852a1..e6b2d27440 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL P1P 0.2 nozzle", + "renamed_from": "Panchroma PLA Stain @BBL P1P 0.2 nozzle", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_05", "instantiation": "true", @@ -26,4 +27,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json similarity index 79% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json index 88678c3159..7e9c805c63 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL P1P.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL P1P", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL P1P", + "renamed_from": "Panchroma PLA Stain @BBL P1P", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_04", "instantiation": "true", @@ -28,4 +29,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json similarity index 74% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1 0.2 nozzle.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json index 435a9c991a..3a07dcb602 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL X1 0.2 nozzle", + "renamed_from": "Panchroma PLA Stain @BBL X1 0.2 nozzle", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_07", "instantiation": "true", @@ -26,4 +27,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json similarity index 79% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json index e5d9bfdf3a..be4651c5f4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL X1", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL X1", + "renamed_from": "Panchroma PLA Stain @BBL X1", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_06", "instantiation": "true", @@ -28,4 +29,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json similarity index 77% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C 0.2 nozzle.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json index d4f02ff39a..0254f8e61e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL X1C 0.2 nozzle", + "renamed_from": "Panchroma PLA Stain @BBL X1C 0.2 nozzle", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_09", "instantiation": "true", @@ -28,4 +29,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json index 1d50deee52..0449da66b0 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @BBL X1C", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @BBL X1C", + "renamed_from": "Panchroma PLA Stain @BBL X1C", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "GFSPM005_08", "instantiation": "true", @@ -34,4 +35,4 @@ "slow_down_layer_time": [ "15" ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @base.json rename to resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json index b2cb2b8cf3..26d3344d4b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Stain @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json @@ -1,6 +1,7 @@ { "type": "filament", - "name": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @base", + "renamed_from": "Panchroma PLA Stain @base", "inherits": "fdm_filament_pla", "from": "system", "filament_id": "GFPM005", @@ -38,4 +39,4 @@ "temperature_vitrification": [ "59" ] -} \ No newline at end of file +} diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json index 1f4b2cf779..8e6ac439b1 100644 --- a/resources/profiles/OrcaFilamentLibrary.json +++ b/resources/profiles/OrcaFilamentLibrary.json @@ -108,6 +108,10 @@ "name": "COEX ABS PRIME @base", "sub_path": "filament/COEX/COEX ABS PRIME @base.json" }, + { + "name": "Eolas Prints ABS @System", + "sub_path": "filament/Eolas Prints/Eolas Prints ABS @System.json" + }, { "name": "FDplast ABS @base", "sub_path": "filament/FDplast/FDplast ABS @base.json" @@ -144,6 +148,10 @@ "name": "COEX ASA PRIME @base", "sub_path": "filament/COEX/COEX ASA PRIME @base.json" }, + { + "name": "Eolas Prints ASA @System", + "sub_path": "filament/Eolas Prints/Eolas Prints ASA @System.json" + }, { "name": "Generic ASA @System", "sub_path": "filament/Generic ASA @System.json" @@ -288,6 +296,18 @@ "name": "COEX PETG @base", "sub_path": "filament/COEX/COEX PETG @base.json" }, + { + "name": "Eolas Prints PETG @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG @System.json" + }, + { + "name": "Eolas Prints PETG Transition @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG Transition @System.json" + }, + { + "name": "Eolas Prints PETG UV Resistant @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json" + }, { "name": "FDplast PETG @base", "sub_path": "filament/FDplast/FDplast PETG @base.json" @@ -420,6 +440,42 @@ "name": "COEX PLA PRIME @base", "sub_path": "filament/COEX/COEX PLA PRIME @base.json" }, + { + "name": "Eolas Prints PLA Antibacterial @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json" + }, + { + "name": "Eolas Prints PLA High Speed @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA High Speed @System.json" + }, + { + "name": "Eolas Prints PLA INGEO 850 @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json" + }, + { + "name": "Eolas Prints PLA INGEO 870 @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json" + }, + { + "name": "Eolas Prints PLA Matte @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Matte @System.json" + }, + { + "name": "Eolas Prints PLA Neon @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Neon @System.json" + }, + { + "name": "Eolas Prints PLA Premium @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @System.json" + }, + { + "name": "Eolas Prints PLA Silk @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Silk @System.json" + }, + { + "name": "Eolas Prints PLA Transition @System", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Transition @System.json" + }, { "name": "FDplast PLA @base", "sub_path": "filament/FDplast/FDplast PLA @base.json" @@ -444,6 +500,10 @@ "name": "NIT PLA @base", "sub_path": "filament/NIT/NIT PLA @base.json" }, + { + "name": "Numakers PLA+ @base", + "sub_path": "filament/Numakers/Numakers PLA+ @base.json" + }, { "name": "Overture Air PLA @base", "sub_path": "filament/Overture/Overture Air PLA @base.json" @@ -517,12 +577,12 @@ "sub_path": "filament/Polymaker/Panchroma PLA Neon @base.json" }, { - "name": "Panchroma PLA Silk @base", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @base.json" + "name": "Panchroma PLA Satin @base", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @base.json" }, { - "name": "Panchroma PLA Stain @base", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @base.json" + "name": "Panchroma PLA Silk @base", + "sub_path": "filament/Polymaker/Panchroma PLA Silk @base.json" }, { "name": "Panchroma PLA Starlight @base", @@ -680,6 +740,22 @@ "name": "COEX TPU 60A @base", "sub_path": "filament/COEX/COEX TPU 60A @base.json" }, + { + "name": "Eolas Prints TPU D60 UV Resistant @System", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json" + }, + { + "name": "Eolas Prints TPU Flex 93A @System", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json" + }, + { + "name": "Eolas Prints TPU Flex D53 @System", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json" + }, + { + "name": "Eolas Prints TPU Transition @System", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Transition @System.json" + }, { "name": "FDplast TPU @base", "sub_path": "filament/FDplast/FDplast TPU @base.json" @@ -692,10 +768,6 @@ "name": "Overture TPU @base", "sub_path": "filament/Overture/Overture TPU @base.json" }, - { - "name": "Numakers PLA+ @base", - "sub_path": "filament/Numakers/Numakers PLA+ @base.json" - }, { "name": "Bambu ABS @System", "sub_path": "filament/Bambu/Bambu ABS @System.json" @@ -980,6 +1052,10 @@ "name": "NIT PLA @System", "sub_path": "filament/NIT/NIT PLA @System.json" }, + { + "name": "Numakers PLA+ @System", + "sub_path": "filament/Numakers/Numakers PLA+ @System.json" + }, { "name": "Overture Air PLA @System", "sub_path": "filament/Overture/Overture Air PLA @System.json" @@ -1053,12 +1129,12 @@ "sub_path": "filament/Polymaker/Panchroma PLA Neon @System.json" }, { - "name": "Panchroma PLA Silk @System", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @System.json" + "name": "Panchroma PLA Satin @System", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @System.json" }, { - "name": "Panchroma PLA Stain @System", - "sub_path": "filament/Polymaker/Panchroma PLA Stain @System.json" + "name": "Panchroma PLA Silk @System", + "sub_path": "filament/Polymaker/Panchroma PLA Silk @System.json" }, { "name": "Panchroma PLA Starlight @System", @@ -1211,81 +1287,6 @@ { "name": "COEX PLA+Silk @System", "sub_path": "filament/COEX/COEX PLA+Silk @System.json" - }, - { "name": "Numakers PLA+ @System", - "sub_path": "filament/Numakers/Numakers PLA+ @System.json" - }, - { - "name": "Eolas Prints PLA Premium @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @System.json" - }, - { - "name": "Eolas Prints PLA Matte @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Matte @System.json" - }, - { - "name": "Eolas Prints PLA Silk @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Silk @System.json" - }, - { - "name": "Eolas Prints PLA Neon @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Neon @System.json" - }, - { - "name": "Eolas Prints PLA High Speed @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA High Speed @System.json" - }, - { - "name": "Eolas Prints PLA INGEO 850 @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json" - }, - { - "name": "Eolas Prints PLA INGEO 870 @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json" - }, - { - "name": "Eolas Prints PLA Antibacterial @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json" - }, - { - "name": "Eolas Prints PLA Transition @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Transition @System.json" - }, - { - "name": "Eolas Prints PETG @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG @System.json" - }, - { - "name": "Eolas Prints PETG UV Resistant @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json" - }, - { - "name": "Eolas Prints PETG Transition @System", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG Transition @System.json" - }, - { - "name": "Eolas Prints TPU Flex 93A @System", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json" - }, - { - "name": "Eolas Prints TPU Flex D53 @System", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json" - }, - { - "name": "Eolas Prints TPU Flex D60 UV Resistant @System", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json" - }, - { - "name": "Eolas Prints TPU Transition @System", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Transition @System.json" - }, - { - "name": "Eolas Prints ABS @System", - "sub_path": "filament/Eolas Prints/Eolas Prints ABS @System.json" - }, - { - "name": "Eolas Prints ASA @System", - "sub_path": "filament/Eolas Prints/Eolas Prints ASA @System.json" } ], "process_list": [], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @System.json similarity index 60% rename from resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @System.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @System.json index 96e40e373f..bbb5b658f6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @System.json @@ -1,7 +1,8 @@ { "type": "filament", - "name": "Panchroma PLA Stain @System", - "inherits": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @System", + "renamed_from": "Panchroma PLA Stain @System", + "inherits": "Panchroma PLA Satin @base", "from": "system", "setting_id": "OGFSPM005", "instantiation": "true", @@ -11,4 +12,4 @@ "filament_max_volumetric_speed": [ "16" ] -} \ No newline at end of file +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @base.json similarity index 87% rename from resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @base.json index 4021abe0c3..a3ae93632b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Stain @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Panchroma PLA Satin @base.json @@ -1,6 +1,7 @@ { "type": "filament", - "name": "Panchroma PLA Stain @base", + "name": "Panchroma PLA Satin @base", + "renamed_from": "Panchroma PLA Stain @base", "inherits": "fdm_filament_pla", "from": "system", "filament_id": "OGFPM005", @@ -32,4 +33,4 @@ "temperature_vitrification": [ "59" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index e5b3b2b155..a468a8edf1 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -462,7 +462,7 @@ "filament_list": [ { "name": "PolyTerra PLA @0.2 nozzle", - "sub_path": "filament/PolyTerra PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyTerra PLA @0.2 nozzle.json" }, { "name": "Snapmaker PLA Lite @U1 base", @@ -482,11 +482,11 @@ }, { "name": "PolyTerra Dual PLA @0.2 nozzle", - "sub_path": "filament/PolyTerra Dual PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json" }, { "name": "PolyTerra J1 PLA @0.2 nozzle", - "sub_path": "filament/PolyTerra J1 PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json" }, { "name": "Snapmaker PLA Lite @U1", @@ -608,6 +608,14 @@ "name": "Snapmaker PET @base", "sub_path": "filament/Snapmaker PET @base.json" }, + { + "name": "PolyLite PETG @Base", + "sub_path": "filament/Polymaker/PolyLite PETG @Base.json" + }, + { + "name": "Polymaker PETG @Base", + "sub_path": "filament/Polymaker/Polymaker PETG @Base.json" + }, { "name": "Snapmaker Dual PETG @base", "sub_path": "filament/Snapmaker Dual PETG @base.json" @@ -640,17 +648,105 @@ "name": "Snapmaker PETG-CF @base", "sub_path": "filament/Snapmaker PETG-CF @base.json" }, + { + "name": "Panchroma CoPE @U1 base", + "sub_path": "filament/Polymaker/Panchroma CoPE @U1 base.json" + }, + { + "name": "Panchroma PLA @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA @U1 base.json" + }, + { + "name": "Panchroma PLA Celestial @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Celestial @U1 base.json" + }, + { + "name": "Panchroma PLA Galaxy @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @U1 base.json" + }, + { + "name": "Panchroma PLA Glow @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Glow @U1 base.json" + }, + { + "name": "Panchroma PLA Luminous @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Luminous @U1 base.json" + }, + { + "name": "Panchroma PLA Marble @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Marble @U1 base.json" + }, + { + "name": "Panchroma PLA Matte @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Matte @U1 base.json" + }, + { + "name": "Panchroma PLA Metallic @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Metallic @U1 base.json" + }, + { + "name": "Panchroma PLA Neon @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Neon @U1 base.json" + }, + { + "name": "Panchroma PLA Satin @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @U1 base.json" + }, + { + "name": "Panchroma PLA Silk @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Silk @U1 base.json" + }, + { + "name": "Panchroma PLA Starlight @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Starlight @U1 base.json" + }, + { + "name": "Panchroma PLA Temp Shift @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @U1 base.json" + }, + { + "name": "Panchroma PLA Translucent @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA Translucent @U1 base.json" + }, + { + "name": "Panchroma PLA UV Shift @U1 base", + "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @U1 base.json" + }, { "name": "PolyLite PLA @U1 base", - "sub_path": "filament/PolyLite PLA @U1 base.json" + "sub_path": "filament/Polymaker/PolyLite PLA @U1 base.json" }, { "name": "PolyLite PLA @base", - "sub_path": "filament/PolyLite PLA @base.json" + "sub_path": "filament/Polymaker/PolyLite PLA @base.json" + }, + { + "name": "PolyLite PLA Pro @U1 base", + "sub_path": "filament/Polymaker/PolyLite PLA Pro @U1 base.json" }, { "name": "PolyTerra PLA @U1 base", - "sub_path": "filament/PolyTerra PLA @U1 base.json" + "sub_path": "filament/Polymaker/PolyTerra PLA @U1 base.json" + }, + { + "name": "Polymaker HT-PLA @Base", + "sub_path": "filament/Polymaker/Polymaker HT-PLA @Base.json" + }, + { + "name": "Polymaker HT-PLA @U1 base", + "sub_path": "filament/Polymaker/Polymaker HT-PLA @U1 base.json" + }, + { + "name": "Polymaker HT-PLA-GF @Base", + "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @Base.json" + }, + { + "name": "Polymaker HT-PLA-GF @U1 base", + "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @U1 base.json" + }, + { + "name": "Polymaker PLA Pro @Base", + "sub_path": "filament/Polymaker/Polymaker PLA Pro @Base.json" }, { "name": "Snapmaker Dual PLA @base", @@ -884,6 +980,14 @@ "name": "Snapmaker PET", "sub_path": "filament/Snapmaker PET.json" }, + { + "name": "PolyLite PETG @Snapmaker U1", + "sub_path": "filament/Polymaker/PolyLite PETG @Snapmaker U1.json" + }, + { + "name": "Polymaker PETG @Snapmaker U1", + "sub_path": "filament/Polymaker/Polymaker PETG @Snapmaker U1.json" + }, { "name": "Snapmaker Dual PETG", "sub_path": "filament/Snapmaker Dual PETG.json" @@ -936,21 +1040,109 @@ "name": "Snapmaker PETG-CF", "sub_path": "filament/Snapmaker PETG-CF.json" }, + { + "name": "Panchroma CoPE @U1", + "sub_path": "filament/Polymaker/Panchroma CoPE @U1.json" + }, + { + "name": "Panchroma PLA @U1", + "sub_path": "filament/Polymaker/Panchroma PLA @U1.json" + }, + { + "name": "Panchroma PLA Celestial @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Celestial @U1.json" + }, + { + "name": "Panchroma PLA Galaxy @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @U1.json" + }, + { + "name": "Panchroma PLA Glow @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Glow @U1.json" + }, + { + "name": "Panchroma PLA Luminous @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Luminous @U1.json" + }, + { + "name": "Panchroma PLA Marble @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Marble @U1.json" + }, + { + "name": "Panchroma PLA Matte @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Matte @U1.json" + }, + { + "name": "Panchroma PLA Metallic @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Metallic @U1.json" + }, + { + "name": "Panchroma PLA Neon @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Neon @U1.json" + }, + { + "name": "Panchroma PLA Satin @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Satin @U1.json" + }, + { + "name": "Panchroma PLA Silk @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Silk @U1.json" + }, + { + "name": "Panchroma PLA Starlight @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Starlight @U1.json" + }, + { + "name": "Panchroma PLA Temp Shift @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @U1.json" + }, + { + "name": "Panchroma PLA Translucent @U1", + "sub_path": "filament/Polymaker/Panchroma PLA Translucent @U1.json" + }, + { + "name": "Panchroma PLA UV Shift @U1", + "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @U1.json" + }, { "name": "PolyLite PLA @U1", - "sub_path": "filament/PolyLite PLA @U1.json" + "sub_path": "filament/Polymaker/PolyLite PLA @U1.json" }, { "name": "PolyLite J1 PLA", - "sub_path": "filament/PolyLite J1 PLA.json" + "sub_path": "filament/Polymaker/PolyLite J1 PLA.json" }, { "name": "PolyLite PLA @0.2 nozzle", - "sub_path": "filament/PolyLite PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyLite PLA @0.2 nozzle.json" + }, + { + "name": "PolyLite PLA Pro @U1", + "sub_path": "filament/Polymaker/PolyLite PLA Pro @U1.json" }, { "name": "PolyTerra PLA @U1", - "sub_path": "filament/PolyTerra PLA @U1.json" + "sub_path": "filament/Polymaker/PolyTerra PLA @U1.json" + }, + { + "name": "Polymaker HT-PLA @Snapmaker U1", + "sub_path": "filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json" + }, + { + "name": "Polymaker HT-PLA @U1", + "sub_path": "filament/Polymaker/Polymaker HT-PLA @U1.json" + }, + { + "name": "Polymaker HT-PLA-GF @Snapmaker U1", + "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json" + }, + { + "name": "Polymaker HT-PLA-GF @U1", + "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @U1.json" + }, + { + "name": "Polymaker PLA Pro @Snapmaker U1", + "sub_path": "filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json" }, { "name": "Snapmaker Dual PLA", @@ -1158,11 +1350,11 @@ }, { "name": "PolyLite Dual PLA @0.2 nozzle", - "sub_path": "filament/PolyLite Dual PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json" }, { "name": "PolyLite J1 PLA @0.2 nozzle", - "sub_path": "filament/PolyLite J1 PLA @0.2 nozzle.json" + "sub_path": "filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json" }, { "name": "Snapmaker Dual PLA Eco", @@ -1206,7 +1398,7 @@ }, { "name": "PolyTerra J1 PLA", - "sub_path": "filament/PolyTerra J1 PLA.json" + "sub_path": "filament/Polymaker/PolyTerra J1 PLA.json" }, { "name": "Snapmaker PLA Matte @U1 base", diff --git a/resources/profiles/Snapmaker/filament/PolyLite Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite Dual PLA @0.2 nozzle.json deleted file mode 100644 index 6528cd8ca0..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite Dual PLA @0.2 nozzle.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite Dual PLA @0.2 nozzle", - "inherits": "PolyLite PLA @0.2 nozzle", - "from": "system", - "setting_id": "490991920", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker A250 Dual (0.2 nozzle)", - "Snapmaker A250 Dual BKit (0.2 nozzle)", - "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)", - "Snapmaker A250 Dual QSKit (0.2 nozzle)", - "Snapmaker A350 Dual (0.2 nozzle)", - "Snapmaker A350 Dual BKit (0.2 nozzle)", - "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)", - "Snapmaker A350 Dual QSKit (0.2 nozzle)", - "Snapmaker Artisan (0.2 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite J1 PLA @0.2 nozzle.json deleted file mode 100644 index 65a87c28d8..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite J1 PLA @0.2 nozzle.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite J1 PLA @0.2 nozzle", - "inherits": "PolyLite PLA @0.2 nozzle", - "from": "system", - "setting_id": "431382384", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker J1 (0.2 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite J1 PLA.json b/resources/profiles/Snapmaker/filament/PolyLite J1 PLA.json deleted file mode 100644 index 0d09c5528a..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite J1 PLA.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite J1 PLA", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "116125055", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker J1 (0.4 nozzle)", - "Snapmaker J1 (0.6 nozzle)", - "Snapmaker J1 (0.8 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @0.2 nozzle.json deleted file mode 100644 index 69999b740a..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite PLA @0.2 nozzle.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "1592803578", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker A250 (0.2 nozzle)", - "Snapmaker A250 BKit (0.2 nozzle)", - "Snapmaker A250 QS+B Kit (0.2 nozzle)", - "Snapmaker A250 QSKit (0.2 nozzle)", - "Snapmaker A350 (0.2 nozzle)", - "Snapmaker A350 BKit (0.2 nozzle)", - "Snapmaker A350 QS+B Kit (0.2 nozzle)", - "Snapmaker A350 QSKit (0.2 nozzle)" - ], - "filament_max_volumetric_speed": [ - "1.6" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json deleted file mode 100644 index fb9c55cdc7..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @U1 base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "13938660340", - "instantiation": "false", - "filament_flow_ratio": [ - "0.95" - ], - "filament_cost": [ - "90" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "default_filament_colour": [ - "" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json deleted file mode 100644 index 0648fdde39..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @U1", - "inherits": "PolyLite PLA @U1 base", - "from": "system", - "setting_id": "6486836500", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json deleted file mode 100644 index e4db1c70b6..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "1393866034", - "instantiation": "false", - "filament_flow_ratio": [ - "0.95" - ], - "filament_cost": [ - "90" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "default_filament_colour": [ - "" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra Dual PLA @0.2 nozzle.json deleted file mode 100644 index 9ce3e9f972..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra Dual PLA @0.2 nozzle.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra Dual PLA @0.2 nozzle", - "inherits": "PolyTerra PLA @0.2 nozzle", - "from": "system", - "setting_id": "1258531391", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker A250 Dual (0.2 nozzle)", - "Snapmaker A250 Dual BKit (0.2 nozzle)", - "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)", - "Snapmaker A250 Dual QSKit (0.2 nozzle)", - "Snapmaker A350 Dual (0.2 nozzle)", - "Snapmaker A350 Dual BKit (0.2 nozzle)", - "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)", - "Snapmaker A350 Dual QSKit (0.2 nozzle)", - "Snapmaker Artisan (0.2 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA @0.2 nozzle.json deleted file mode 100644 index a2f99fd132..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA @0.2 nozzle.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra J1 PLA @0.2 nozzle", - "inherits": "PolyTerra PLA @0.2 nozzle", - "from": "system", - "setting_id": "1072374370", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker J1 (0.2 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA.json b/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA.json deleted file mode 100644 index c696f52735..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra J1 PLA.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra J1 PLA", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "3958200796", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker J1 (0.4 nozzle)", - "Snapmaker J1 (0.6 nozzle)", - "Snapmaker J1 (0.8 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @0.2 nozzle.json deleted file mode 100644 index f996844ce1..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra PLA @0.2 nozzle.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "409934824", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker A250 (0.2 nozzle)", - "Snapmaker A250 BKit (0.2 nozzle)", - "Snapmaker A250 QS+B Kit (0.2 nozzle)", - "Snapmaker A250 QSKit (0.2 nozzle)", - "Snapmaker A350 (0.2 nozzle)", - "Snapmaker A350 BKit (0.2 nozzle)", - "Snapmaker A350 QS+B Kit (0.2 nozzle)", - "Snapmaker A350 QSKit (0.2 nozzle)" - ], - "filament_max_volumetric_speed": [ - "1.4" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json deleted file mode 100644 index 3b7b9a8b94..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @U1 base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "37895926870", - "instantiation": "false", - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.31" - ], - "filament_max_volumetric_speed": [ - "14.4" - ], - "default_filament_colour": [ - "" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json deleted file mode 100644 index 478c008d7a..0000000000 --- a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @U1", - "inherits": "PolyTerra PLA @U1 base", - "from": "system", - "setting_id": "12580059400", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)" - ] -} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1 base.json new file mode 100644 index 0000000000..1575543964 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma CoPE @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM016", + "instantiation": "false", + "filament_cost": [ + "19.99" + ], + "filament_density": [ + "1.29" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "58" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1.json new file mode 100644 index 0000000000..abd252e87a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma CoPE @U1", + "inherits": "Panchroma CoPE @U1 base", + "from": "system", + "setting_id": "GFSPM016_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1 base.json new file mode 100644 index 0000000000..a09edc3df1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1 base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Panchroma PLA @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM001", + "instantiation": "false", + "filament_cost": [ + "19.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "58" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1.json new file mode 100644 index 0000000000..a77038834b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA @U1", + "inherits": "Panchroma PLA @U1 base", + "from": "system", + "setting_id": "GFSPM001_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1 base.json new file mode 100644 index 0000000000..305c3b8476 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Celestial @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM008", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1.json new file mode 100644 index 0000000000..cfd1b918b1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Celestial @U1", + "inherits": "Panchroma PLA Celestial @U1 base", + "from": "system", + "setting_id": "GFSPM008_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1 base.json new file mode 100644 index 0000000000..9129ce17a7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Galaxy @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM007", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1.json new file mode 100644 index 0000000000..465e8b461d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Galaxy @U1", + "inherits": "Panchroma PLA Galaxy @U1 base", + "from": "system", + "setting_id": "GFSPM007_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1 base.json new file mode 100644 index 0000000000..21177be0db --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Glow @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM010", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1.json new file mode 100644 index 0000000000..5cbf021349 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Glow @U1", + "inherits": "Panchroma PLA Glow @U1 base", + "from": "system", + "setting_id": "GFSPM010_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1 base.json new file mode 100644 index 0000000000..c8afc7bc16 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Luminous @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM011", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1.json new file mode 100644 index 0000000000..7747c1ccfb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Luminous @U1", + "inherits": "Panchroma PLA Luminous @U1 base", + "from": "system", + "setting_id": "GFSPM011_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1 base.json new file mode 100644 index 0000000000..8a462959a8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Marble @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM003", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.31" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1.json new file mode 100644 index 0000000000..8fb2780b8f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @U1.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Panchroma PLA Marble @U1", + "inherits": "Panchroma PLA Marble @U1 base", + "from": "system", + "setting_id": "GFSPM003_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1 base.json new file mode 100644 index 0000000000..9ab72e1484 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Matte @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM002", + "instantiation": "false", + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.31" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1.json new file mode 100644 index 0000000000..9823adaa0c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @U1.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Panchroma PLA Matte @U1", + "inherits": "Panchroma PLA Matte @U1 base", + "from": "system", + "setting_id": "GFSPM002_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1 base.json new file mode 100644 index 0000000000..f9a33ba035 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Metallic @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM012", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1.json new file mode 100644 index 0000000000..0196929a54 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Metallic @U1", + "inherits": "Panchroma PLA Metallic @U1 base", + "from": "system", + "setting_id": "GFSPM012_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1 base.json new file mode 100644 index 0000000000..70332dc961 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Neon @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM013", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1.json new file mode 100644 index 0000000000..cc5ab3fbaf --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Neon @U1", + "inherits": "Panchroma PLA Neon @U1 base", + "from": "system", + "setting_id": "GFSPM013_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1 base.json new file mode 100644 index 0000000000..1f38ea1a45 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1 base.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Panchroma PLA Satin @U1 base", + "renamed_from": "Panchroma PLA Stain @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM005", + "instantiation": "false", + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "59" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1.json new file mode 100644 index 0000000000..6e914b56a4 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @U1.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Panchroma PLA Satin @U1", + "renamed_from": "Panchroma PLA Stain @U1", + "inherits": "Panchroma PLA Satin @U1 base", + "from": "system", + "setting_id": "GFSPM005_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1 base.json new file mode 100644 index 0000000000..43e9f98164 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Silk @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM004", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.31" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "58" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1.json new file mode 100644 index 0000000000..52102ab63b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Silk @U1", + "inherits": "Panchroma PLA Silk @U1 base", + "from": "system", + "setting_id": "GFSPM004_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1 base.json new file mode 100644 index 0000000000..0c9fd9bf52 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Starlight @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM009", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1.json new file mode 100644 index 0000000000..9029dc250c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Starlight @U1", + "inherits": "Panchroma PLA Starlight @U1 base", + "from": "system", + "setting_id": "GFSPM009_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1 base.json new file mode 100644 index 0000000000..c86779555f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Temp Shift @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM015", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1.json new file mode 100644 index 0000000000..5d7e17696b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Temp Shift @U1", + "inherits": "Panchroma PLA Temp Shift @U1 base", + "from": "system", + "setting_id": "GFSPM015_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1 base.json new file mode 100644 index 0000000000..cb786e6f9a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA Translucent @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM006", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1.json new file mode 100644 index 0000000000..6e35878869 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA Translucent @U1", + "inherits": "Panchroma PLA Translucent @U1 base", + "from": "system", + "setting_id": "GFSPM006_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1 base.json new file mode 100644 index 0000000000..c209198398 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Panchroma PLA UV Shift @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM014", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "61" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1.json new file mode 100644 index 0000000000..f85802624c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Panchroma PLA UV Shift @U1", + "inherits": "Panchroma PLA UV Shift @U1 base", + "from": "system", + "setting_id": "GFSPM014_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json new file mode 100644 index 0000000000..f47614d710 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite Dual PLA @0.2 nozzle", + "setting_id": "490991920", + "inherits": "PolyLite PLA @0.2 nozzle", + "compatible_printers": [ + "Snapmaker A250 Dual (0.2 nozzle)", + "Snapmaker A250 Dual BKit (0.2 nozzle)", + "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)", + "Snapmaker A250 Dual QSKit (0.2 nozzle)", + "Snapmaker A350 Dual (0.2 nozzle)", + "Snapmaker A350 Dual BKit (0.2 nozzle)", + "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)", + "Snapmaker A350 Dual QSKit (0.2 nozzle)", + "Snapmaker Artisan (0.2 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json new file mode 100644 index 0000000000..4e2b21f785 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite J1 PLA @0.2 nozzle", + "setting_id": "431382384", + "inherits": "PolyLite PLA @0.2 nozzle", + "compatible_printers": [ + "Snapmaker J1 (0.2 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json new file mode 100644 index 0000000000..ac3cdd9ba9 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite J1 PLA", + "setting_id": "116125055", + "inherits": "PolyLite PLA @base", + "compatible_printers": [ + "Snapmaker J1 (0.4 nozzle)", + "Snapmaker J1 (0.6 nozzle)", + "Snapmaker J1 (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json new file mode 100644 index 0000000000..ed8ea01808 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json @@ -0,0 +1,29 @@ +{ + "filament_density": [ + "1.25" + ], + "temp_min": [ + "230" + ], + "temp_max": [ + "240" + ], + "temperture_vitrification": [ + "75" + ], + "idle_temperture": [ + "0" + ], + "filament_soluble": [ + "0" + ], + "description": "", + "inherits": "fdm_filament_petg", + "name": "PolyLite PETG @Base", + "type": "filament", + "instantiation": "false", + "from": "system", + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json new file mode 100644 index 0000000000..2e8a0e0943 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json @@ -0,0 +1,117 @@ +{ + "type": "filament", + "name": "PolyLite PETG @Snapmaker U1", + "from": "system", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.92" + ], + "fan_cooling_layer_time": [ + "20" + ], + "filament_cost": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "0" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "81" + ], + "filament_id": "PMPE04", + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "setting_id": "PMPE04_U1", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "pressure_advance": [ + "0.05" + ], + "inherits": "PolyLite PETG @Base" +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json new file mode 100644 index 0000000000..b3c643a042 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite PLA @0.2 nozzle", + "setting_id": "1592803578", + "inherits": "PolyLite PLA @base", + "compatible_printers": [ + "Snapmaker A250 (0.2 nozzle)", + "Snapmaker A250 BKit (0.2 nozzle)", + "Snapmaker A250 QS+B Kit (0.2 nozzle)", + "Snapmaker A250 QSKit (0.2 nozzle)", + "Snapmaker A350 (0.2 nozzle)", + "Snapmaker A350 BKit (0.2 nozzle)", + "Snapmaker A350 QS+B Kit (0.2 nozzle)", + "Snapmaker A350 QSKit (0.2 nozzle)" + ], + "filament_max_volumetric_speed": [ + "1.6" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1 base.json new file mode 100644 index 0000000000..d0547572b6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1 base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "PolyLite PLA @U1 base", + "filament_id": "13938660340", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.95" + ], + "filament_cost": [ + "90" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "default_filament_colour": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1.json new file mode 100644 index 0000000000..ad81f2d79d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @U1.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite PLA @U1", + "setting_id": "6486836500", + "inherits": "PolyLite PLA @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json new file mode 100644 index 0000000000..2a7310f405 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "PolyLite PLA @base", + "filament_id": "1393866034", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.95" + ], + "filament_cost": [ + "90" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "default_filament_colour": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1 base.json new file mode 100644 index 0000000000..f5d87e4277 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1 base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "PolyLite PLA Pro @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM019", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "62" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1.json new file mode 100644 index 0000000000..f0b65f7717 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "PolyLite PLA Pro @U1", + "inherits": "PolyLite PLA Pro @U1 base", + "from": "system", + "setting_id": "GFSPM019_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json new file mode 100644 index 0000000000..c3673b4d3c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra Dual PLA @0.2 nozzle", + "setting_id": "1258531391", + "inherits": "PolyTerra PLA @0.2 nozzle", + "compatible_printers": [ + "Snapmaker A250 Dual (0.2 nozzle)", + "Snapmaker A250 Dual BKit (0.2 nozzle)", + "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)", + "Snapmaker A250 Dual QSKit (0.2 nozzle)", + "Snapmaker A350 Dual (0.2 nozzle)", + "Snapmaker A350 Dual BKit (0.2 nozzle)", + "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)", + "Snapmaker A350 Dual QSKit (0.2 nozzle)", + "Snapmaker Artisan (0.2 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json new file mode 100644 index 0000000000..24fda4c652 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra J1 PLA @0.2 nozzle", + "setting_id": "1072374370", + "inherits": "PolyTerra PLA @0.2 nozzle", + "compatible_printers": [ + "Snapmaker J1 (0.2 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json new file mode 100644 index 0000000000..9592d5cbd0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra J1 PLA", + "setting_id": "3958200796", + "inherits": "PolyTerra PLA @base", + "compatible_printers": [ + "Snapmaker J1 (0.4 nozzle)", + "Snapmaker J1 (0.6 nozzle)", + "Snapmaker J1 (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json new file mode 100644 index 0000000000..215685b8e3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra PLA @0.2 nozzle", + "setting_id": "409934824", + "inherits": "PolyTerra PLA @base", + "compatible_printers": [ + "Snapmaker A250 (0.2 nozzle)", + "Snapmaker A250 BKit (0.2 nozzle)", + "Snapmaker A250 QS+B Kit (0.2 nozzle)", + "Snapmaker A250 QSKit (0.2 nozzle)", + "Snapmaker A350 (0.2 nozzle)", + "Snapmaker A350 BKit (0.2 nozzle)", + "Snapmaker A350 QS+B Kit (0.2 nozzle)", + "Snapmaker A350 QSKit (0.2 nozzle)" + ], + "filament_max_volumetric_speed": [ + "1.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1 base.json new file mode 100644 index 0000000000..861179ca06 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1 base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "PolyTerra PLA @U1 base", + "filament_id": "37895926870", + "inherits": "fdm_filament_pla", + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.31" + ], + "filament_max_volumetric_speed": [ + "14.4" + ], + "default_filament_colour": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1.json new file mode 100644 index 0000000000..f77d1d8082 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @U1.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra PLA @U1", + "setting_id": "12580059400", + "inherits": "PolyTerra PLA @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json new file mode 100644 index 0000000000..77e155ade4 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json @@ -0,0 +1,29 @@ +{ + "filament_density": [ + "1.28" + ], + "temp_min": [ + "210" + ], + "temp_max": [ + "230" + ], + "temperture_vitrification": [ + "156" + ], + "idle_temperture": [ + "0" + ], + "filament_soluble": [ + "0" + ], + "description": "", + "inherits": "fdm_filament_pla", + "name": "Polymaker HT-PLA @Base", + "type": "filament", + "instantiation": "false", + "from": "system", + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json new file mode 100644 index 0000000000..b466d702fe --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA @Snapmaker U1", + "from": "system", + "instantiation": "true", + "cool_plate_temp": [ + "50" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_cost": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "slow_down_min_speed": [ + "5" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "PMPL02_U1", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "inherits": "Polymaker HT-PLA @Base", + "filament_id": "PMPL02" +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1 base.json new file mode 100644 index 0000000000..9a997d8e3f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1 base.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM017", + "instantiation": "false", + "filament_cost": [ + "26.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1.json new file mode 100644 index 0000000000..da678d8a4c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA @U1", + "inherits": "Polymaker HT-PLA @U1 base", + "from": "system", + "setting_id": "GFSPM017_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json new file mode 100644 index 0000000000..4cd066b3d0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json @@ -0,0 +1,29 @@ +{ + "filament_density": [ + "1.34" + ], + "temp_min": [ + "210" + ], + "temp_max": [ + "230" + ], + "temperture_vitrification": [ + "148" + ], + "idle_temperture": [ + "0" + ], + "filament_soluble": [ + "0" + ], + "description": "", + "inherits": "fdm_filament_pla", + "name": "Polymaker HT-PLA-GF @Base", + "type": "filament", + "instantiation": "false", + "from": "system", + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json new file mode 100644 index 0000000000..b18f79d461 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @Snapmaker U1", + "from": "system", + "instantiation": "true", + "cool_plate_temp": [ + "50" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.04" + ], + "filament_cost": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "slow_down_min_speed": [ + "5" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "PMPL01_U1", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "inherits": "Polymaker HT-PLA-GF @Base", + "filament_id": "PMPL01" +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1 base.json new file mode 100644 index 0000000000..fb70c1df40 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1 base.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFPM018", + "instantiation": "false", + "filament_cost": [ + "32.99" + ], + "filament_density": [ + "1.34" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1.json new file mode 100644 index 0000000000..554d1452be --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @U1.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @U1", + "inherits": "Polymaker HT-PLA-GF @U1 base", + "from": "system", + "setting_id": "GFSPM018_00", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json new file mode 100644 index 0000000000..04b25b012d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json @@ -0,0 +1,29 @@ +{ + "filament_density": [ + "1.3" + ], + "temp_min": [ + "240" + ], + "temp_max": [ + "260" + ], + "temperture_vitrification": [ + "75" + ], + "idle_temperture": [ + "0" + ], + "filament_soluble": [ + "0" + ], + "description": "", + "inherits": "fdm_filament_petg", + "name": "Polymaker PETG @Base", + "type": "filament", + "instantiation": "false", + "from": "system", + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json new file mode 100644 index 0000000000..c7559a65f7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json @@ -0,0 +1,111 @@ +{ + "type": "filament", + "name": "Polymaker PETG @Snapmaker U1", + "from": "system", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_cost": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "10" + ], + "fan_min_speed": [ + "50" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "71" + ], + "filament_id": "PMPE01", + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "setting_id": "PMPE01_U1", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "inherits": "Polymaker PETG @Base" +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json new file mode 100644 index 0000000000..d25cf0270d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json @@ -0,0 +1,29 @@ +{ + "filament_density": [ + "1.23" + ], + "temp_min": [ + "190" + ], + "temp_max": [ + "230" + ], + "temperture_vitrification": [ + "55" + ], + "idle_temperture": [ + "0" + ], + "filament_soluble": [ + "0" + ], + "description": "", + "inherits": "fdm_filament_pla", + "name": "Polymaker PLA Pro @Base", + "type": "filament", + "instantiation": "false", + "from": "system", + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json new file mode 100644 index 0000000000..8b77ae186f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Polymaker PLA Pro @Snapmaker U1", + "from": "system", + "instantiation": "true", + "cool_plate_temp": [ + "50" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "65" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_cost": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "slow_down_min_speed": [ + "5" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "61" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "PMPL03_U1", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "inherits": "Polymaker PLA Pro @Base", + "filament_id": "PMPL03" +} \ No newline at end of file