update locale and Chinese translations

This commit is contained in:
SoftFever 2024-03-16 17:57:29 +08:00
parent 550c4d6ca1
commit 7a54131f39
19 changed files with 528 additions and 509 deletions

View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"POT-Creation-Date: 2024-03-16 17:57+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -3360,6 +3360,11 @@ msgstr ""
"While printing by object, the extruder may collide with a skirt.\n"
"Thus, reset the skirt layer to 1 to avoid collisions."
msgid ""
"seam_slope_start_height need to be smaller than layer_height.\n"
"Reset to 0."
msgstr ""
msgid "Auto bed leveling"
msgstr "Auto bed leveling"
@ -3986,7 +3991,7 @@ msgstr "Volume:"
msgid "Size:"
msgstr "Size:"
#, boost-format
#, c-format, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6860,13 +6865,13 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
msgstr ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
msgid "Line width"
msgstr "Line width"
@ -8409,15 +8414,6 @@ msgid ""
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
"Orca will automatically cap the print speed to ensure it doesn't surpass the "
"printer's capabilities.\n"
"You can adjust the maximum speed setting in your printer's configuration to "
"get higher speeds."
msgstr ""
msgid "Generating skirt & brim"
msgstr "Generating skirt & brim"
@ -9990,10 +9986,10 @@ msgstr "Full fan speed at layer"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13366,8 +13362,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""