3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-13 09:47:58 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Reverted the perimeter generator to not save the perimeter areas.

Browse source 
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.

Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
This commit is contained in:
bubnikv 2016-11-17 23:22:59 +01:00
parent 2085a482c7
commit 79f5a16536
12 changed files with 94 additions and 116 deletions
Download patch file Download diff file Expand all files Collapse all files

2
xs/src/libslic3r/GCode/PressureEqualizer.cpp
View file

@ -264,7 +264,7 @@ bool GCodePressureEqualizer::process_line(const char *line, const size_t len, GC
if (rate < 40.f) {
printf("Extremely low flow rate: %f. Line %d, Length: %f, extrusion: %f Old position: (%f, %f, %f), new position: (%f, %f, %f)\n",
rate,
line_idx,
int(line_idx),
sqrt(len2), sqrt((diff[3]*diff[3])/len2),
m_current_pos[0], m_current_pos[1], m_current_pos[2],
new_pos[0], new_pos[1], new_pos[2]);