3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-06 22:47:32 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Remove unnecessary trailing spaces (#8752)

Browse source
This commit is contained in:
Alexandre Folle de Menezes 2025-03-08 02:41:31 -03:00 • committed by GitHub
parent 464b89c3a7
commit 74d9a88480
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
23 changed files with 152 additions and 152 deletions
Download patch file Download diff file Expand all files Collapse all files

10
localization/i18n/OrcaSlicer.pot
View file

@ -3493,7 +3493,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -7757,7 +7757,7 @@ msgid ""
msgstr "" msgstr ""
#, possible-boost-format #, possible-boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "" msgstr ""
msgid "" msgid ""
@ -9438,7 +9438,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -10902,7 +10902,7 @@ msgstr ""
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -12190,7 +12190,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

20
localization/i18n/ca/OrcaSlicer_ca.po
View file

@ -3757,10 +3757,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"El perímetre addicional alternat no funciona correctament amb 'Assegurar el " "El perímetre addicional alternat no funciona correctament amb 'Assegurar el "
"gruix de la carcassa vertical' establert a Tots. " "gruix de la carcassa vertical' establert a Tots."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8469,9 +8469,9 @@ msgstr ""
"següents canvis no desats:" "següents canvis no desats:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "" msgstr ""
"Heu canviat alguns paràmetres de la configuració predeterminada \"%1%\". " "Heu canviat alguns paràmetres de la configuració predeterminada \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10510,10 +10510,10 @@ msgstr "Perímetres addicionals en voladissos ( Experimental )"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Crear camins perimetrals addicionals sobre voladissos pronunciats i zones on " "Crear camins perimetrals addicionals sobre voladissos pronunciats i zones on "
"no es poden ancorar ponts. " "no es poden ancorar ponts."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Invertir en capes senars" msgstr "Invertir en capes senars"
@ -12499,12 +12499,12 @@ msgstr "Capes i Perímetres"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"No imprimiu l'ompliment de buits amb una longitud inferior al llindar " "No imprimiu l'ompliment de buits amb una longitud inferior al llindar "
"especificat (en mm). Aquesta configuració s'aplica a l'ompliment superior, " "especificat (en mm). Aquesta configuració s'aplica a l'ompliment superior, "
"inferior i sòlid i, si s'utilitza el generador perimetral clàssic, a " "inferior i sòlid i, si s'utilitza el generador perimetral clàssic, a "
"l'ompliment de buits de paret. " "l'ompliment de buits de paret."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -14157,7 +14157,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Longitud mínima d'extrusió del filament en mm en imprimir la faldilla. Zero " "Longitud mínima d'extrusió del filament en mm en imprimir la faldilla. Zero "
"significa que aquesta funció està desactivada.\n" "significa que aquesta funció està desactivada.\n"
@ -14165,7 +14165,7 @@ msgstr ""
"Utilitzar un valor diferent de zero és útil si la impressora està " "Utilitzar un valor diferent de zero és útil si la impressora està "
"configurada per imprimir sense una línia principal.\n" "configurada per imprimir sense una línia principal.\n"
"El nombre final de bucles no es té en compte en organitzar o validar la " "El nombre final de bucles no es té en compte en organitzar o validar la "
"distància dels objectes. Augmenteu el nombre de bucle en aquest cas. " "distància dels objectes. Augmenteu el nombre de bucle en aquest cas."
msgid "" msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated " "The printing speed in exported gcode will be slowed down, when the estimated "

12
localization/i18n/cs/OrcaSlicer_cs.po
View file

@ -3683,7 +3683,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8229,7 +8229,7 @@ msgstr ""
"následující neuložené změny:" "následující neuložené změny:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "" msgstr ""
msgid "" msgid ""
@ -10064,10 +10064,10 @@ msgstr "Dodatečné perimetry u převisů"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Vytvořte další perimetry přes strmé převisy a oblasti, kde mosty nelze " "Vytvořte další perimetry přes strmé převisy a oblasti, kde mosty nelze "
"ukotvit. " "ukotvit."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "" msgstr ""
@ -11682,7 +11682,7 @@ msgstr "Vrstvy a perimetry"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -13161,7 +13161,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

12
localization/i18n/de/OrcaSlicer_de.po
View file

@ -3797,7 +3797,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Der alternative zusätzliche Wandmodus funktioniert nicht gut, wenn die " "Der alternative zusätzliche Wandmodus funktioniert nicht gut, wenn die "
"vertikale Wanddicke auf Alle eingestellt ist." "vertikale Wanddicke auf Alle eingestellt ist."
@ -8550,8 +8550,8 @@ msgstr ""
"die folgenden nicht gespeicherten Änderungen:" "die folgenden nicht gespeicherten Änderungen:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Sie haben einige Einstellungen des Profils \"%1%\" geändert. " msgstr "Sie haben einige Einstellungen des Profils \"%1%\" geändert."
msgid "" msgid ""
"\n" "\n"
@ -10605,7 +10605,7 @@ msgstr "Extra Umfänge bei Überhängen"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Erstellen Sie zusätzliche Umfangspfade über steile Überhänge und Bereiche, " "Erstellen Sie zusätzliche Umfangspfade über steile Überhänge und Bereiche, "
"in denen Brücken nicht verankert werden können." "in denen Brücken nicht verankert werden können."
@ -12605,7 +12605,7 @@ msgstr "Schichten und Perimeter"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Drucken Sie keine Lückenfüllung mit einer Länge, die kleiner als der " "Drucken Sie keine Lückenfüllung mit einer Länge, die kleiner als der "
"angegebene Schwellenwert (in mm) ist. Diese Einstellung gilt für die obere, " "angegebene Schwellenwert (in mm) ist. Diese Einstellung gilt für die obere, "
@ -14255,7 +14255,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Minimale Filamentextrusionslänge in mm beim Drucken der Umrandung. Null " "Minimale Filamentextrusionslänge in mm beim Drucken der Umrandung. Null "
"bedeutet, dass diese Funktion deaktiviert ist.\n" "bedeutet, dass diese Funktion deaktiviert ist.\n"

12
localization/i18n/en/OrcaSlicer_en.po
View file

@ -3647,7 +3647,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8196,8 +8196,8 @@ msgstr ""
"contains the following unsaved changes:" "contains the following unsaved changes:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "You have changed some settings of preset \"%1%\". " msgstr "You have changed some settings of preset \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -9992,7 +9992,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -11549,7 +11549,7 @@ msgstr "Layers and Perimeters"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -12924,7 +12924,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

12
localization/i18n/es/OrcaSlicer_es.po
View file

@ -3790,10 +3790,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Perímetro adicional alternado no funciona bien cuando \"Garantizar el grosor " "Perímetro adicional alternado no funciona bien cuando \"Garantizar el grosor "
"vertical de las cubiertas\" se establece en Todos. " "vertical de las cubiertas\" se establece en Todos."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8514,7 +8514,7 @@ msgstr ""
"los siguientes cambios no guardados:" "los siguientes cambios no guardados:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Ha cambiado algunos ajustes del perfil \"%1%\"." msgstr "Ha cambiado algunos ajustes del perfil \"%1%\"."
msgid "" msgid ""
@ -10503,7 +10503,7 @@ msgstr "Perímetros extra en voladizos"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Crear perímetros adicionales sobre voladizos pronunciados y áreas donde los " "Crear perímetros adicionales sobre voladizos pronunciados y áreas donde los "
"puentes no pueden ser anclados." "puentes no pueden ser anclados."
@ -12409,7 +12409,7 @@ msgstr "Capas y Perímetros"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Filtra los huecos menores que el umbral especificado (en mm). Este ajuste " "Filtra los huecos menores que el umbral especificado (en mm). Este ajuste "
"afecta los rellenos superior, inferior e interno, así como al relleno de " "afecta los rellenos superior, inferior e interno, así como al relleno de "
@ -14052,7 +14052,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Longitud mínima de extrusión de filamento en mm al imprimir el faldón. Cero " "Longitud mínima de extrusión de filamento en mm al imprimir el faldón. Cero "
"significa que esta característica está desactivada.\n" "significa que esta característica está desactivada.\n"

18
localization/i18n/fr/OrcaSlicer_fr.po
View file

@ -3786,10 +3786,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"La paroi supplémentaire alternée ne fonctionne pas bien lorsque le paramètre " "La paroi supplémentaire alternée ne fonctionne pas bien lorsque le paramètre "
"Assurer l’épaisseur de la coque verticale est réglée sur Tous. " "Assurer l’épaisseur de la coque verticale est réglée sur Tous."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8579,7 +8579,7 @@ msgstr ""
"traitement et contient les modifications non enregistrées suivantes :" "traitement et contient les modifications non enregistrées suivantes :"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Vous avez modifié certains paramètres du réglage prédéfini « %1% »." msgstr "Vous avez modifié certains paramètres du réglage prédéfini « %1% »."
msgid "" msgid ""
@ -10655,10 +10655,10 @@ msgstr "Parois supplémentaires sur les surplombs"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Créer des chemins de périmètres supplémentaires sur les surplombs abrupts et " "Créer des chemins de périmètres supplémentaires sur les surplombs abrupts et "
"les zones où les ponts ne peuvent pas être ancrés. " "les zones où les ponts ne peuvent pas être ancrés."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Inverser lors du passage pair" msgstr "Inverser lors du passage pair"
@ -12672,12 +12672,12 @@ msgstr "Couches et Périmètres"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Ne pas imprimer le remplissage des espaces dont la longueur est inférieure " "Ne pas imprimer le remplissage des espaces dont la longueur est inférieure "
"au seuil spécifié (en mm). Ce paramètre s’applique aux remplissages " "au seuil spécifié (en mm). Ce paramètre s’applique aux remplissages "
"supérieur, inférieur et solide et, si vous utilisez le générateur de " "supérieur, inférieur et solide et, si vous utilisez le générateur de "
"périmètre classique, pour le remplissage de la paroi. " "périmètre classique, pour le remplissage de la paroi."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -14350,7 +14350,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Longueur minimale d’extrusion du filament en mm lors de l’impression de la " "Longueur minimale d’extrusion du filament en mm lors de l’impression de la "
"jupe. Zéro signifie que cette fonction est désactivée.\n" "jupe. Zéro signifie que cette fonction est désactivée.\n"
@ -14359,7 +14359,7 @@ msgstr ""
"configurée pour imprimer sans ligne d’amorce.\n" "configurée pour imprimer sans ligne d’amorce.\n"
"Le nombre final de boucles n’est pas pris en compte lors de la disposition " "Le nombre final de boucles n’est pas pris en compte lors de la disposition "
"ou de la validation de la distance des objets. Dans ce cas, augmenter le " "ou de la validation de la distance des objets. Dans ce cas, augmenter le "
"nombre de boucles. " "nombre de boucles."
msgid "" msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated " "The printing speed in exported gcode will be slowed down, when the estimated "

12
localization/i18n/hu/OrcaSlicer_hu.po
View file

@ -3684,7 +3684,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8277,8 +8277,8 @@ msgstr ""
"következő elmentetlen változásokat tartalmazza:" "következő elmentetlen változásokat tartalmazza:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "You have changed some settings of preset \"%1%\". " msgstr "You have changed some settings of preset \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10106,7 +10106,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -11669,7 +11669,7 @@ msgstr "Rétegek és peremek"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -13077,7 +13077,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

20
localization/i18n/it/OrcaSlicer_it.po
View file

@ -3790,10 +3790,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Parete aggiuntiva alternativa non funziona bene quando \"Garantisci spessore " "Parete aggiuntiva alternativa non funziona bene quando \"Garantisci spessore "
"verticale del guscio\" è impostato su Tutto. " "verticale del guscio\" è impostato su Tutto."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8506,8 +8506,8 @@ msgstr ""
"modifiche non salvate:" "modifiche non salvate:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Hai modificato alcune impostazioni del profilo \"%1%\". " msgstr "Hai modificato alcune impostazioni del profilo \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10578,10 +10578,10 @@ msgstr "Pareti aggiuntive su sporgenze"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Crea pareti aggiuntive su sporgenze ripide e aree in cui i ponti non possono " "Crea pareti aggiuntive su sporgenze ripide e aree in cui i ponti non possono "
"essere ancorati. " "essere ancorati."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Inverti su strati pari" msgstr "Inverti su strati pari"
@ -12587,12 +12587,12 @@ msgstr "Strati e Perimetri"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Non stampa il riempimento sugli spazi vuoti con una lunghezza inferiore alla " "Non stampa il riempimento sugli spazi vuoti con una lunghezza inferiore alla "
"soglia specificata (in mm). Questa impostazione si applica al riempimento " "soglia specificata (in mm). Questa impostazione si applica al riempimento "
"superiore, inferiore e solido e, se si utilizza il generatore di perimetri " "superiore, inferiore e solido e, se si utilizza il generatore di perimetri "
"classico, al riempimento degli spazi vuoti delle pareti. " "classico, al riempimento degli spazi vuoti delle pareti."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -14265,7 +14265,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Lunghezza minima di estrusione del filamento (in millimetri) durante la " "Lunghezza minima di estrusione del filamento (in millimetri) durante la "
"stampa della gonna. 0 indica che questa funzione è disabilitata.\n" "stampa della gonna. 0 indica che questa funzione è disabilitata.\n"
@ -14274,7 +14274,7 @@ msgstr ""
"configurata per stampare senza una linea iniziale.\n" "configurata per stampare senza una linea iniziale.\n"
"Il numero finale di perimetri non viene preso in considerazione durante la " "Il numero finale di perimetri non viene preso in considerazione durante la "
"disposizione o la convalida della distanza degli oggetti. In tal caso, " "disposizione o la convalida della distanza degli oggetti. In tal caso, "
"aumentare il numero di perimetri. " "aumentare il numero di perimetri."
msgid "" msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated " "The printing speed in exported gcode will be slowed down, when the estimated "

12
localization/i18n/ja/OrcaSlicer_ja.po
View file

@ -3631,7 +3631,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8132,8 +8132,8 @@ msgstr ""
"存の変更があります" "存の変更があります"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "You have changed some settings of preset \"%1%\". " msgstr "You have changed some settings of preset \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -9920,7 +9920,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -11459,7 +11459,7 @@ msgstr "積層と境界"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -12852,7 +12852,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

20
localization/i18n/ko/OrcaSlicer_ko.po
View file

@ -3655,9 +3655,9 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"세로 쉘 두께가 모두로 설정된 경우 대체 여분의 벽이 제대로 작동하지 않습니다. " "세로 쉘 두께가 모두로 설정된 경우 대체 여분의 벽이 제대로 작동하지 않습니다."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8204,8 +8204,8 @@ msgstr ""
"않은 변경 사항을 포함:" "않은 변경 사항을 포함:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "사전 설정 \"%1%\"의 일부 설정을 변경했습니다. " msgstr "사전 설정 \"%1%\"의 일부 설정을 변경했습니다."
msgid "" msgid ""
"\n" "\n"
@ -10147,9 +10147,9 @@ msgstr "오버행 추가 둘레"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"가파른 오버행와 브릿지를 고정할 수 없는 지역 위에 추가 둘레 경로를 만듭니다. " "가파른 오버행와 브릿지를 고정할 수 없는 지역 위에 추가 둘레 경로를 만듭니다."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "짝수에 반전" msgstr "짝수에 반전"
@ -11987,11 +11987,11 @@ msgstr "레이어와 윤곽선"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"지정된 임계값(mm 단위)보다 길이가 작은 간격 채우기를 출력하지 마십시오. 이 설" "지정된 임계값(mm 단위)보다 길이가 작은 간격 채우기를 출력하지 마십시오. 이 설"
"정은 상단, 하단 및 솔리드 채우기에 적용되며, 클래식 주변 생성기를 사용하는 경" "정은 상단, 하단 및 솔리드 채우기에 적용되며, 클래식 주변 생성기를 사용하는 경"
"우 벽 간격 채우기에 적용됩니다. " "우 벽 간격 채우기에 적용됩니다."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -13543,7 +13543,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"스커트를 출력할 때 최소 필라멘트 압출 길이(mm)입니다. 0은 이 기능이 비활성화" "스커트를 출력할 때 최소 필라멘트 압출 길이(mm)입니다. 0은 이 기능이 비활성화"
"되었음을 의미합니다.\n" "되었음을 의미합니다.\n"
@ -13551,7 +13551,7 @@ msgstr ""
"프린터가 프라임 라인 없이 출력하도록 설정된 경우 0이 아닌 값을 사용하는 것이 " "프린터가 프라임 라인 없이 출력하도록 설정된 경우 0이 아닌 값을 사용하는 것이 "
"유용합니다.\n" "유용합니다.\n"
"루프의 최종 수는 객체 거리를 정렬하거나 검증하는 동안 고려되지 않습니다. 그러" "루프의 최종 수는 객체 거리를 정렬하거나 검증하는 동안 고려되지 않습니다. 그러"
"한 경우에는 루프 수를 늘리십시오. " "한 경우에는 루프 수를 늘리십시오."
msgid "" msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated " "The printing speed in exported gcode will be slowed down, when the estimated "

12
localization/i18n/nl/OrcaSlicer_nl.po
View file

@ -3724,7 +3724,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8397,8 +8397,8 @@ msgstr ""
"bevat de navolgende nog niet opgeslagen aanpassingen:" "bevat de navolgende nog niet opgeslagen aanpassingen:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "You have changed some settings of preset \"%1%\". " msgstr "You have changed some settings of preset \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10247,7 +10247,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -11825,7 +11825,7 @@ msgstr "Lagen en perimeters"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -13246,7 +13246,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

14
localization/i18n/pl/OrcaSlicer_pl.po
View file

@ -3754,10 +3754,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Alternatywna dodatkowa ściana działa tylko wtedy, gdy jest wyłączona opcja " "Alternatywna dodatkowa ściana działa tylko wtedy, gdy jest wyłączona opcja "
"„zapewnij stałą grubość pionowej powłoki”. " "„zapewnij stałą grubość pionowej powłoki”."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8435,7 +8435,7 @@ msgstr ""
"następujące niezapisane zmiany:" "następujące niezapisane zmiany:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Zmieniono niektóre ustawienia profilu „%1%”." msgstr "Zmieniono niektóre ustawienia profilu „%1%”."
msgid "" msgid ""
@ -10419,10 +10419,10 @@ msgstr "Dodatkowe obrysy na nawisach"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Tworzy dodatkowe ścieżeki nad stromymi nawisami i w obszarach, gdzie nie " "Tworzy dodatkowe ścieżeki nad stromymi nawisami i w obszarach, gdzie nie "
"można zakotwiczyć mostów. " "można zakotwiczyć mostów."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Zmień kierunek na parzystych" msgstr "Zmień kierunek na parzystych"
@ -12312,7 +12312,7 @@ msgstr "Warstwy i obwody"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Nie drukuj wypełnienia szczelin, których długość jest mniejsza niż określony " "Nie drukuj wypełnienia szczelin, których długość jest mniejsza niż określony "
"próg (w mm). Ustawienie to dotyczy górnego i dolnego pełnego wypełnienia " "próg (w mm). Ustawienie to dotyczy górnego i dolnego pełnego wypełnienia "
@ -13946,7 +13946,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Minimalna długość ekstruzji filamentu w mm podczas drukowania skirtu. Zero " "Minimalna długość ekstruzji filamentu w mm podczas drukowania skirtu. Zero "
"oznacza, że ta funkcja jest wyłączona.\n" "oznacza, że ta funkcja jest wyłączona.\n"

18
localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
View file

@ -3747,10 +3747,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"A parede extra alternada não funciona bem quando a espessura vertical da " "A parede extra alternada não funciona bem quando a espessura vertical da "
"casca está definida para Todos. " "casca está definida para Todos."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8448,8 +8448,8 @@ msgstr ""
"contém as seguintes alterações não salvas:" "contém as seguintes alterações não salvas:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Você alterou algumas configurações da predefinição \"%1%\". " msgstr "Você alterou algumas configurações da predefinição \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10452,10 +10452,10 @@ msgstr "Paredes extras em saliências"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Crie caminhos de perímetro adicionais em saliências íngremes e áreas onde " "Crie caminhos de perímetro adicionais em saliências íngremes e áreas onde "
"pontes não podem ser ancoradas. " "pontes não podem ser ancoradas."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "" msgstr ""
@ -12391,12 +12391,12 @@ msgstr "Camadas e Perímetros"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Não imprimir preenchimento de lacuna com um comprimento menor que o limiar " "Não imprimir preenchimento de lacuna com um comprimento menor que o limiar "
"especificado (em mm). Esta configuração se aplica ao preenchimento superior, " "especificado (em mm). Esta configuração se aplica ao preenchimento superior, "
"inferior e sólido e, se estiver usando o gerador de perímetro clássico, ao " "inferior e sólido e, se estiver usando o gerador de perímetro clássico, ao "
"preenchimento de lacuna de parede. " "preenchimento de lacuna de parede."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -13994,7 +13994,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Comprimento mínimo de extrusão do filamento em mm ao imprimir a saia. Zero " "Comprimento mínimo de extrusão do filamento em mm ao imprimir a saia. Zero "
"significa que esse recurso está desabilitado.\n" "significa que esse recurso está desabilitado.\n"

12
localization/i18n/ru/OrcaSlicer_ru.po
View file

@ -3789,7 +3789,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Чередующаяся дополнительная стенка не работает, если для «Сохранение толщины " "Чередующаяся дополнительная стенка не работает, если для «Сохранение толщины "
"вертикальной оболочки» установлено значение «Везде»." "вертикальной оболочки» установлено значение «Везде»."
@ -8556,8 +8556,8 @@ msgstr ""
"несохранённые изменения:" "несохранённые изменения:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Вы изменили некоторые параметры профиля \"%1%\". " msgstr "Вы изменили некоторые параметры профиля \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10614,7 +10614,7 @@ msgstr "Дополнительные периметры на нависания
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Создание дополнительных дорожек по периметру над крутыми нависаниями и " "Создание дополнительных дорожек по периметру над крутыми нависаниями и "
"участками, где мосты не могут быть закреплены. Это повышает вероятность " "участками, где мосты не могут быть закреплены. Это повышает вероятность "
@ -12641,7 +12641,7 @@ msgstr "Слои и периметры"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Не заполнять щели, длина которого меньше указанного порога (в мм). Эта " "Не заполнять щели, длина которого меньше указанного порога (в мм). Эта "
"настройка применяется к верхнему, нижнему и сплошному заполнению, а при " "настройка применяется к верхнему, нижнему и сплошному заполнению, а при "
@ -14314,7 +14314,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Минимальное количество пластика, которое должно быть выдавлено при печати " "Минимальное количество пластика, которое должно быть выдавлено при печати "
"юбки в миллиметрах. 0 - функция отключена.\n" "юбки в миллиметрах. 0 - функция отключена.\n"

12
localization/i18n/sv/OrcaSlicer_sv.po
View file

@ -3659,7 +3659,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
msgid "" msgid ""
@ -8226,8 +8226,8 @@ msgstr ""
"innehåller följande osparade ändringar:" "innehåller följande osparade ändringar:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "You have changed some settings of preset \"%1%\". " msgstr "You have changed some settings of preset \"%1%\"."
msgid "" msgid ""
"\n" "\n"
@ -10011,7 +10011,7 @@ msgstr ""
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
msgid "Reverse on even" msgid "Reverse on even"
@ -11554,7 +11554,7 @@ msgstr "Lager och perimetrar"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -12931,7 +12931,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""

24
localization/i18n/tr/OrcaSlicer_tr.po
View file

@ -3693,11 +3693,11 @@ msgstr ""
"Değer 0'a sıfırlanacaktır." "Değer 0'a sıfırlanacaktır."
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness is " "Alternate extra wall does't work well when ensure vertical shell thickness "
"set to All. " "is set to All."
msgstr "" msgstr ""
"Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak ayarlandığından " "Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak ayarlandığından "
"emin olunduğunda iyi çalışmaz. " "emin olunduğunda iyi çalışmaz."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8332,7 +8332,7 @@ msgstr ""
"değişiklikleri içeriyor:" "değişiklikleri içeriyor:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "“%1%” ön ayarının bazı ayarlarını değiştirdiniz." msgstr "“%1%” ön ayarının bazı ayarlarını değiştirdiniz."
msgid "" msgid ""
@ -10318,11 +10318,11 @@ msgid "Extra perimeters on overhangs"
msgstr "Çıkıntılarda ekstra çevre (perimeter)" msgstr "Çıkıntılarda ekstra çevre (perimeter)"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where bridges " "Create additional perimeter paths over steep overhangs and areas where "
"cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Dik çıkıntılar ve köprülerin sabitlenemediği alanlar üzerinde ek çevre yolları " "Dik çıkıntılar ve köprülerin sabitlenemediği alanlar üzerinde ek çevre yolları "
"(perimeter) oluşturun. " "(perimeter) oluşturun."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Çiftleri ters çevirin" msgstr "Çiftleri ters çevirin"
@ -12225,9 +12225,9 @@ msgid "Layers and Perimeters"
msgstr "Katmanlar ve Çevreler" msgstr "Katmanlar ve Çevreler"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified (in " "Don't print gap fill with a length is smaller than the threshold specified "
"mm). This setting applies to top, bottom and solid infill and, if using the " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Belirtilen eşikten (mm cinsinden) daha küçük bir uzunluğa sahip boşluk " "Belirtilen eşikten (mm cinsinden) daha küçük bir uzunluğa sahip boşluk "
"dolgusunu yazdırmayın. Bu ayar üst, alt ve katı dolgu için ve klasik çevre " "dolgusunu yazdırmayın. Bu ayar üst, alt ve katı dolgu için ve klasik çevre "
@ -13832,8 +13832,8 @@ msgid ""
"\n" "\n"
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or validating " "Final number of loops is not taling into account whli arranging or "
"objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Etek yazdırılırken mm cinsinden minimum filaman ekstrüzyon uzunluğu. Sıfır, bu " "Etek yazdırılırken mm cinsinden minimum filaman ekstrüzyon uzunluğu. Sıfır, bu "
"özelliğin devre dışı olduğu anlamına gelir.\n" "özelliğin devre dışı olduğu anlamına gelir.\n"

20
localization/i18n/uk/OrcaSlicer_uk.po
View file

@ -3753,10 +3753,10 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "" msgstr ""
"Чергування додаткової стінки не працює добре, якщо для параметра " "Чергування додаткової стінки не працює добре, якщо для параметра "
"\"Забезпечити товщину вертикальної оболонки\" встановлено значення \"Всі\". " "\"Забезпечити товщину вертикальної оболонки\" встановлено значення \"Всі\"."
msgid "" msgid ""
"Change these settings automatically? \n" "Change these settings automatically? \n"
@ -8460,8 +8460,8 @@ msgstr ""
"вонамістить такі незбережені зміни:" "вонамістить такі незбережені зміни:"
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "Ви змінили деякі налаштування пресету “%1%”. " msgstr "Ви змінили деякі налаштування пресету “%1%”."
msgid "" msgid ""
"\n" "\n"
@ -10477,10 +10477,10 @@ msgstr "Додаткові периметри для нависань"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "" msgstr ""
"Створювати додаткові лінії по периметру друку над крутими нависаннями та в " "Створювати додаткові лінії по периметру друку над крутими нависаннями та в "
"зонах, де неможливо закріпити мости. " "зонах, де неможливо закріпити мости."
msgid "Reverse on even" msgid "Reverse on even"
msgstr "Зміна напрямку на парних шарах" msgstr "Зміна напрямку на парних шарах"
@ -12439,12 +12439,12 @@ msgstr "Шари та периметри"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"Не друкувати заповнення прогалин, якщо їхня довжина менша за вказаний поріг " "Не друкувати заповнення прогалин, якщо їхня довжина менша за вказаний поріг "
"(у мм). Це налаштування застосовується до верхнього, нижнього та суцільного " "(у мм). Це налаштування застосовується до верхнього, нижнього та суцільного "
"заповнення, а також, при використанні класичного генератора периметрів, до " "заповнення, а також, при використанні класичного генератора периметрів, до "
"заповнення проміжків у стінках. " "заповнення проміжків у стінках."
msgid "" msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be " "Speed of gap infill. Gap usually has irregular line width and should be "
@ -14074,7 +14074,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"Мінімальна довжина подачі філаменту у мм при друці спідниці. Нуль означає, " "Мінімальна довжина подачі філаменту у мм при друці спідниці. Нуль означає, "
"що ця функція буде вимкнена.\n" "що ця функція буде вимкнена.\n"
@ -14082,7 +14082,7 @@ msgstr ""
"Значення більше нуля доречно використовувати, якщо принтер налаштований без " "Значення більше нуля доречно використовувати, якщо принтер налаштований без "
"підготовчої лінії. \n" "підготовчої лінії. \n"
"Остаточна кількість контурів не враховується при упорядкуванні або перевірці " "Остаточна кількість контурів не враховується при упорядкуванні або перевірці "
"відстані об'єктів. Збільшіть кількість контурів у такому разі. " "відстані об'єктів. Збільшіть кількість контурів у такому разі."
msgid "" msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated " "The printing speed in exported gcode will be slowed down, when the estimated "

12
localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
View file

@ -3579,7 +3579,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "“交替添加额外”与“确保垂直外壳厚度”的”全部“选项不兼容。" msgstr "“交替添加额外”与“确保垂直外壳厚度”的”全部“选项不兼容。"
msgid "" msgid ""
@ -7993,7 +7993,7 @@ msgid ""
msgstr "预设“%1%”和新的工艺预设不兼容，并且它包含以下未保存的修改：" msgstr "预设“%1%”和新的工艺预设不兼容，并且它包含以下未保存的修改："
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "您已更改了预设 “%1%” 的一些设置。" msgstr "您已更改了预设 “%1%” 的一些设置。"
msgid "" msgid ""
@ -9775,7 +9775,7 @@ msgstr "悬垂上的额外周长"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "在陡峭的悬垂和无法固定桥接的区域上创建额外的周长路径。" msgstr "在陡峭的悬垂和无法固定桥接的区域上创建额外的周长路径。"
msgid "Reverse on even" msgid "Reverse on even"
@ -11388,7 +11388,7 @@ msgstr "层和墙"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
msgid "" msgid ""
@ -12789,7 +12789,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
msgid "" msgid ""
@ -16964,7 +16964,7 @@ msgstr ""
#~ "Using a non zero value is useful if the printer is set up to print " #~ "Using a non zero value is useful if the printer is set up to print "
#~ "without a prime line.\n" #~ "without a prime line.\n"
#~ "Final number of loops is not taling into account whlie arranging or " #~ "Final number of loops is not taling into account whlie arranging or "
#~ "validating objects distance. Increase loop number in such case. " #~ "validating objects distance. Increase loop number in such case."
#~ msgstr "" #~ msgstr ""
#~ "打印skirt时的最小挤出长度，单位为mm。0表示关闭此功能。\n" #~ "打印skirt时的最小挤出长度，单位为mm。0表示关闭此功能。\n"
#~ "\n" #~ "\n"

10
localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
View file

@ -3586,7 +3586,7 @@ msgstr ""
msgid "" msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness " "Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. " "is set to All."
msgstr "當確保垂直外殼厚度設為『全部』時，交錯額外牆壁效果不佳。" msgstr "當確保垂直外殼厚度設為『全部』時，交錯額外牆壁效果不佳。"
msgid "" msgid ""
@ -8029,7 +8029,7 @@ msgid ""
msgstr "預設「%1%」與新的列印參數設定檔不相容，並包含以下未儲存的變更：" msgstr "預設「%1%」與新的列印參數設定檔不相容，並包含以下未儲存的變更："
#, boost-format #, boost-format
msgid "You have changed some settings of preset \"%1%\". " msgid "You have changed some settings of preset \"%1%\"."
msgstr "已更改預設「%1%」的一些設定。" msgstr "已更改預設「%1%」的一些設定。"
msgid "" msgid ""
@ -9856,7 +9856,7 @@ msgstr "懸挑上的額外周長"
msgid "" msgid ""
"Create additional perimeter paths over steep overhangs and areas where " "Create additional perimeter paths over steep overhangs and areas where "
"bridges cannot be anchored. " "bridges cannot be anchored."
msgstr "在陡峭的懸空和無法固定橋接的區域中增加額外的周長路徑。" msgstr "在陡峭的懸空和無法固定橋接的區域中增加額外的周長路徑。"
msgid "Reverse on even" msgid "Reverse on even"
@ -11585,7 +11585,7 @@ msgstr "層和牆"
msgid "" msgid ""
"Don't print gap fill with a length is smaller than the threshold specified " "Don't print gap fill with a length is smaller than the threshold specified "
"(in mm). This setting applies to top, bottom and solid infill and, if using " "(in mm). This setting applies to top, bottom and solid infill and, if using "
"the classic perimeter generator, to wall gap fill. " "the classic perimeter generator, to wall gap fill."
msgstr "" msgstr ""
"若縫隙填充的長度小於設定的閾值（以 mm 計），則不列印該填充。此設定適用於頂" "若縫隙填充的長度小於設定的閾值（以 mm 計），則不列印該填充。此設定適用於頂"
"部、底部和實心填充，以及使用經典牆產生器時的牆體縫隙填充。" "部、底部和實心填充，以及使用經典牆產生器時的牆體縫隙填充。"
@ -13028,7 +13028,7 @@ msgid ""
"Using a non zero value is useful if the printer is set up to print without a " "Using a non zero value is useful if the printer is set up to print without a "
"prime line.\n" "prime line.\n"
"Final number of loops is not taling into account whli arranging or " "Final number of loops is not taling into account whli arranging or "
"validating objects distance. Increase loop number in such case. " "validating objects distance. Increase loop number in such case."
msgstr "" msgstr ""
"列印 Skirt 時的最小擠出線材長度（單位：毫米）。設為 0 表示停用此功能。若列印" "列印 Skirt 時的最小擠出線材長度（單位：毫米）。設為 0 表示停用此功能。若列印"
"設備設定為不使用沖洗線材，建議設定為非零值。注意，排列或驗證物件距離時，最終" "設備設定為不使用沖洗線材，建議設定為非零值。注意，排列或驗證物件距離時，最終"

6
src/libslic3r/PrintConfig.cpp
View file

@ -1089,7 +1089,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("extra_perimeters_on_overhangs", coBool); def = this->add("extra_perimeters_on_overhangs", coBool);
def->label = L("Extra perimeters on overhangs"); def->label = L("Extra perimeters on overhangs");
def->category = L("Quality"); def->category = L("Quality");
def->tooltip = L("Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored. "); def->tooltip = L("Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored.");
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false)); def->set_default_value(new ConfigOptionBool(false));
@ -2805,7 +2805,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Filter out tiny gaps"); def->label = L("Filter out tiny gaps");
def->category = L("Layers and Perimeters"); def->category = L("Layers and Perimeters");
def->tooltip = L("Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, " def->tooltip = L("Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, "
"bottom and solid infill and, if using the classic perimeter generator, to wall gap fill. "); "bottom and solid infill and, if using the classic perimeter generator, to wall gap fill.");
def->sidetext = L("mm"); def->sidetext = L("mm");
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0)); def->set_default_value(new ConfigOptionFloat(0));
@ -4339,7 +4339,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Skirt minimum extrusion length"); def->full_label = L("Skirt minimum extrusion length");
def->tooltip = L("Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n\n" def->tooltip = L("Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n\n"
"Using a non zero value is useful if the printer is set up to print without a prime line.\n" "Using a non zero value is useful if the printer is set up to print without a prime line.\n"
"Final number of loops is not taling into account whli arranging or validating objects distance. Increase loop number in such case. "); "Final number of loops is not taling into account whli arranging or validating objects distance. Increase loop number in such case.");
def->min = 0; def->min = 0;
def->sidetext = L("mm"); def->sidetext = L("mm");
def->mode = comAdvanced; def->mode = comAdvanced;

2
src/slic3r/GUI/ConfigManipulation.cpp
View file

@ -322,7 +322,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
if (config->opt_bool("alternate_extra_wall") && if (config->opt_bool("alternate_extra_wall") &&
(config->opt_enum<EnsureVerticalShellThickness>("ensure_vertical_shell_thickness") == evstAll)) { (config->opt_enum<EnsureVerticalShellThickness>("ensure_vertical_shell_thickness") == evstAll)) {
wxString msg_text = _(L("Alternate extra wall does't work well when ensure vertical shell thickness is set to All. ")); wxString msg_text = _(L("Alternate extra wall does't work well when ensure vertical shell thickness is set to All."));
if (is_global_config) if (is_global_config)
msg_text += "\n\n" + _(L("Change these settings automatically? \n" msg_text += "\n\n" + _(L("Change these settings automatically? \n"

2
src/slic3r/GUI/UnsavedChangesDialog.cpp
View file

@ -1418,7 +1418,7 @@ void UnsavedChangesDialog::update(Preset::Type type, PresetCollection* dependent
wxString action_msg; wxString action_msg;
if (dependent_presets) { if (dependent_presets) {
action_msg = format_wxstr(_L("You have changed some settings of preset \"%1%\". "), dependent_presets->get_edited_preset().name); action_msg = format_wxstr(_L("You have changed some settings of preset \"%1%\"."), dependent_presets->get_edited_preset().name);
if (!m_transfer_btn) { if (!m_transfer_btn) {
action_msg += _L("\nYou can save or discard the preset values you have modified."); action_msg += _L("\nYou can save or discard the preset values you have modified.");
} else { } else {