diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index 544d82f629..351b20cfc9 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -1,10 +1,26 @@ { "name": "Elegoo", - "version": "01.00.00.03", + "version": "01.01.00.00", "force_update": "0", "description": "Elegoo configurations", "machine_model_list": [ { + "name": "Elegoo Neptune X", + "sub_path": "machine/Elegoo Neptune X.json" + }, + { + "name": "Elegoo Neptune 2", + "sub_path": "machine/Elegoo Neptune 2.json" + }, + { + "name": "Elegoo Neptune 2S", + "sub_path": "machine/Elegoo Neptune 2S.json" + }, + { + "name": "Elegoo Neptune 2D", + "sub_path": "machine/Elegoo Neptune 2D.json" + }, + { "name": "Elegoo Neptune 3", "sub_path": "machine/Elegoo Neptune 3.json" }, @@ -29,6 +45,22 @@ { "name": "fdm_process_elegoo_common", "sub_path": "process/fdm_process_elegoo_common.json" + }, + { + "name": "0.08mm Extra Fine @Elegoo NeptuneX", + "sub_path": "process/0.08mm Extra Fine @Elegoo NeptuneX.json" + }, + { + "name": "0.08mm Extra Fine @Elegoo Neptune2", + "sub_path": "process/0.08mm Extra Fine @Elegoo Neptune2.json" + }, + { + "name": "0.08mm Extra Fine @Elegoo Neptune2S", + "sub_path": "process/0.08mm Extra Fine @Elegoo Neptune2S.json" + }, + { + "name": "0.08mm Extra Fine @Elegoo Neptune2D", + "sub_path": "process/0.08mm Extra Fine @Elegoo Neptune2D.json" }, { "name": "0.08mm Extra Fine @Elegoo Neptune3", @@ -45,6 +77,22 @@ { "name": "0.08mm Extra Fine @Elegoo Neptune3Max", "sub_path": "process/0.08mm Extra Fine @Elegoo Neptune3Max.json" + }, + { + "name": "0.12mm Fine @Elegoo NeptuneX", + "sub_path": "process/0.12mm Fine @Elegoo NeptuneX.json" + }, + { + "name": "0.12mm Fine @Elegoo Neptune2", + "sub_path": "process/0.12mm Fine @Elegoo Neptune2.json" + }, + { + "name": "0.12mm Fine @Elegoo Neptune2S", + "sub_path": "process/0.12mm Fine @Elegoo Neptune2S.json" + }, + { + "name": "0.12mm Fine @Elegoo Neptune2D", + "sub_path": "process/0.12mm Fine @Elegoo Neptune2D.json" }, { "name": "0.12mm Fine @Elegoo Neptune3", @@ -61,6 +109,22 @@ { "name": "0.12mm Fine @Elegoo Neptune3Max", "sub_path": "process/0.12mm Fine @Elegoo Neptune3Max.json" + }, + { + "name": "0.16mm Optimal @Elegoo NeptuneX", + "sub_path": "process/0.16mm Optimal @Elegoo NeptuneX.json" + }, + { + "name": "0.16mm Optimal @Elegoo Neptune2", + "sub_path": "process/0.16mm Optimal @Elegoo Neptune2.json" + }, + { + "name": "0.16mm Optimal @Elegoo Neptune2S", + "sub_path": "process/0.16mm Optimal @Elegoo Neptune2S.json" + }, + { + "name": "0.16mm Optimal @Elegoo Neptune2D", + "sub_path": "process/0.16mm Optimal @Elegoo Neptune2D.json" }, { "name": "0.16mm Optimal @Elegoo Neptune3", @@ -77,6 +141,22 @@ { "name": "0.16mm Optimal @Elegoo Neptune3Max", "sub_path": "process/0.16mm Optimal @Elegoo Neptune3Max.json" + }, + { + "name": "0.20mm Standard @Elegoo NeptuneX", + "sub_path": "process/0.20mm Standard @Elegoo NeptuneX.json" + }, + { + "name": "0.20mm Standard @Elegoo Neptune2", + "sub_path": "process/0.20mm Standard @Elegoo Neptune2.json" + }, + { + "name": "0.20mm Standard @Elegoo Neptune2S", + "sub_path": "process/0.20mm Standard @Elegoo Neptune2S.json" + }, + { + "name": "0.20mm Standard @Elegoo Neptune2D", + "sub_path": "process/0.20mm Standard @Elegoo Neptune2D.json" }, { "name": "0.20mm Standard @Elegoo Neptune3", @@ -93,6 +173,22 @@ { "name": "0.20mm Standard @Elegoo Neptune3Max", "sub_path": "process/0.20mm Standard @Elegoo Neptune3Max.json" + }, + { + "name": "0.24mm Draft @Elegoo NeptuneX", + "sub_path": "process/0.24mm Draft @Elegoo NeptuneX.json" + }, + { + "name": "0.24mm Draft @Elegoo Neptune2", + "sub_path": "process/0.24mm Draft @Elegoo Neptune2.json" + }, + { + "name": "0.24mm Draft @Elegoo Neptune2S", + "sub_path": "process/0.24mm Draft @Elegoo Neptune2S.json" + }, + { + "name": "0.24mm Draft @Elegoo Neptune2D", + "sub_path": "process/0.24mm Draft @Elegoo Neptune2D.json" }, { "name": "0.24mm Draft @Elegoo Neptune3", @@ -109,6 +205,22 @@ { "name": "0.24mm Draft @Elegoo Neptune3Max", "sub_path": "process/0.24mm Draft @Elegoo Neptune3Max.json" + }, + { + "name": "0.28mm Extra Draft @Elegoo NeptuneX", + "sub_path": "process/0.28mm Extra Draft @Elegoo NeptuneX.json" + }, + { + "name": "0.28mm Extra Draft @Elegoo Neptune2", + "sub_path": "process/0.28mm Extra Draft @Elegoo Neptune2.json" + }, + { + "name": "0.28mm Extra Draft @Elegoo Neptune2S", + "sub_path": "process/0.28mm Extra Draft @Elegoo Neptune2S.json" + }, + { + "name": "0.28mm Extra Draft @Elegoo Neptune2D", + "sub_path": "process/0.28mm Extra Draft @Elegoo Neptune2D.json" }, { "name": "0.28mm Extra Draft @Elegoo Neptune3", @@ -165,6 +277,22 @@ { "name": "fdm_elegoo_common", "sub_path": "machine/fdm_elegoo_common.json" + }, + { + "name": "Elegoo Neptune X 0.4 nozzle", + "sub_path": "machine/Elegoo Neptune X 0.4 nozzle.json" + }, + { + "name": "Elegoo Neptune 2 0.4 nozzle", + "sub_path": "machine/Elegoo Neptune 2 0.4 nozzle.json" + }, + { + "name": "Elegoo Neptune 2S 0.4 nozzle", + "sub_path": "machine/Elegoo Neptune 2S 0.4 nozzle.json" + }, + { + "name": "Elegoo Neptune 2D 0.4 nozzle", + "sub_path": "machine/Elegoo Neptune 2D 0.4 nozzle.json" }, { "name": "Elegoo Neptune 3 0.4 nozzle", diff --git a/resources/profiles/Elegoo/Elegoo Neptune 2D_cover.png b/resources/profiles/Elegoo/Elegoo Neptune 2D_cover.png new file mode 100644 index 0000000000..f2a6731825 Binary files /dev/null and b/resources/profiles/Elegoo/Elegoo Neptune 2D_cover.png differ diff --git a/resources/profiles/Elegoo/Elegoo Neptune 2S_cover.png b/resources/profiles/Elegoo/Elegoo Neptune 2S_cover.png new file mode 100644 index 0000000000..a6d1a95303 Binary files /dev/null and b/resources/profiles/Elegoo/Elegoo Neptune 2S_cover.png differ diff --git a/resources/profiles/Elegoo/Elegoo Neptune 2_cover.png b/resources/profiles/Elegoo/Elegoo Neptune 2_cover.png new file mode 100644 index 0000000000..5f7863e1a0 Binary files /dev/null and b/resources/profiles/Elegoo/Elegoo Neptune 2_cover.png differ diff --git a/resources/profiles/Elegoo/Elegoo Neptune X_cover.png b/resources/profiles/Elegoo/Elegoo Neptune X_cover.png new file mode 100644 index 0000000000..91f8e77525 Binary files /dev/null and b/resources/profiles/Elegoo/Elegoo Neptune X_cover.png differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2_buildplate_model.stl b/resources/profiles/Elegoo/elegoo_neptune2_buildplate_model.stl new file mode 100644 index 0000000000..a3837d2b59 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2_buildplate_model.stl differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2_buildplate_texture.png b/resources/profiles/Elegoo/elegoo_neptune2_buildplate_texture.png new file mode 100644 index 0000000000..68fcb729c6 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2_buildplate_texture.png differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_model.stl b/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_model.stl new file mode 100644 index 0000000000..a3837d2b59 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_model.stl differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_texture.png b/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_texture.png new file mode 100644 index 0000000000..68fcb729c6 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2d_buildplate_texture.png differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_model.stl b/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_model.stl new file mode 100644 index 0000000000..a3837d2b59 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_model.stl differ diff --git a/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_texture.png b/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_texture.png new file mode 100644 index 0000000000..68fcb729c6 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptune2s_buildplate_texture.png differ diff --git a/resources/profiles/Elegoo/elegoo_neptunex_buildplate_model.stl b/resources/profiles/Elegoo/elegoo_neptunex_buildplate_model.stl new file mode 100644 index 0000000000..a3837d2b59 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptunex_buildplate_model.stl differ diff --git a/resources/profiles/Elegoo/elegoo_neptunex_buildplate_texture.png b/resources/profiles/Elegoo/elegoo_neptunex_buildplate_texture.png new file mode 100644 index 0000000000..68fcb729c6 Binary files /dev/null and b/resources/profiles/Elegoo/elegoo_neptunex_buildplate_texture.png differ diff --git a/resources/profiles/Elegoo/filament/Elegoo Generic ABS.json b/resources/profiles/Elegoo/filament/Elegoo Generic ABS.json index 9c28789941..02ceacdff7 100644 --- a/resources/profiles/Elegoo/filament/Elegoo Generic ABS.json +++ b/resources/profiles/Elegoo/filament/Elegoo Generic ABS.json @@ -16,6 +16,11 @@ "245" ], "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle", + "Elegoo Neptune 2 0.4 nozzle", + "Elegoo Neptune 2S 0.4 nozzle", + "Elegoo Neptune 2D 0.4 nozzle", + "Elegoo Neptune 3 0.4 nozzle", "Elegoo Neptune 3 0.4 nozzle", "Elegoo Neptune 3 Pro 0.4 nozzle", "Elegoo Neptune 3 Plus 0.4 nozzle", diff --git a/resources/profiles/Elegoo/filament/Elegoo Generic PETG.json b/resources/profiles/Elegoo/filament/Elegoo Generic PETG.json index cac6bf7e74..b0d57b2733 100644 --- a/resources/profiles/Elegoo/filament/Elegoo Generic PETG.json +++ b/resources/profiles/Elegoo/filament/Elegoo Generic PETG.json @@ -46,6 +46,11 @@ "; filament start gcode\n" ], "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle", + "Elegoo Neptune 2 0.4 nozzle", + "Elegoo Neptune 2S 0.4 nozzle", + "Elegoo Neptune 2D 0.4 nozzle", + "Elegoo Neptune 3 0.4 nozzle", "Elegoo Neptune 3 0.4 nozzle", "Elegoo Neptune 3 Pro 0.4 nozzle", "Elegoo Neptune 3 Plus 0.4 nozzle", diff --git a/resources/profiles/Elegoo/filament/Elegoo Generic PLA.json b/resources/profiles/Elegoo/filament/Elegoo Generic PLA.json index 6a092cb834..bb5a25ad5b 100644 --- a/resources/profiles/Elegoo/filament/Elegoo Generic PLA.json +++ b/resources/profiles/Elegoo/filament/Elegoo Generic PLA.json @@ -19,6 +19,10 @@ "8" ], "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle", + "Elegoo Neptune 2 0.4 nozzle", + "Elegoo Neptune 2S 0.4 nozzle", + "Elegoo Neptune 2D 0.4 nozzle", "Elegoo Neptune 3 0.4 nozzle", "Elegoo Neptune 3 Pro 0.4 nozzle", "Elegoo Neptune 3 Plus 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json new file mode 100644 index 0000000000..e267ff48bf --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Elegoo Neptune 2 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_elegoo_common", + "printer_model": "Elegoo Neptune 2", + "default_print_profile": "0.20mm Standard @Elegoo Neptune2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Elegoo", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2.5" + ], + "retraction_speed": [ + "60" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Elegoo Generic PLA" + ], + "machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2.json new file mode 100644 index 0000000000..643e719f3c --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Elegoo Neptune 2", + "model_id": "Elegoo-Neptune-2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Elegoo", + "bed_model": "elegoo_neptune2_buildplate_model.stl", + "bed_texture": "elegoo_neptune2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA" +} diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json new file mode 100644 index 0000000000..4c9da41e60 --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Elegoo Neptune 2D 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_elegoo_common", + "printer_model": "Elegoo Neptune 2D", + "default_print_profile": "0.20mm Standard @Elegoo Neptune2D", + "extruder_colour": [ + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "nozzle_diameter": [ + "0.4", + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28", + "0.28" + ], + "min_layer_height": [ + "0.08", + "0.08" + ], + "printer_settings_id": "Elegoo", + "retraction_minimum_travel": [ + "2", + "2" + ], + "retract_before_wipe": [ + "70%", + "70%" + ], + "retraction_length": [ + "5", + "5" + ], + "retraction_speed": [ + "60", + "60" + ], + "retract_length_toolchange": [ + "1", + "1" + ], + "deretraction_speed": [ + "40", + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Elegoo Generic PLA" + ], + "machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{hot_plate_temp_initial_layer} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{nozzle_temperature_initial_layer} ; set final nozzle temp\nM190 S{hot_plate_temp_initial_layer} ; wait for bed temp to stabilize\nM109 S{nozzle_temperature_initial_layer} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json new file mode 100644 index 0000000000..2527c7d33a --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Elegoo Neptune 2D", + "model_id": "Elegoo-Neptune-2D", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Elegoo", + "bed_model": "elegoo_neptune2d_buildplate_model.stl", + "bed_texture": "elegoo_neptune2d_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA" +} diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json new file mode 100644 index 0000000000..2667c6a96a --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Elegoo Neptune 2S 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_elegoo_common", + "printer_model": "Elegoo Neptune 2S", + "default_print_profile": "0.20mm Standard @Elegoo Neptune2S", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Elegoo", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2.5" + ], + "retraction_speed": [ + "60" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Elegoo Generic PLA" + ], + "machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json b/resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json new file mode 100644 index 0000000000..dd733b4abd --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Elegoo Neptune 2S", + "model_id": "Elegoo-Neptune-2S", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Elegoo", + "bed_model": "elegoo_neptune2s_buildplate_model.stl", + "bed_texture": "elegoo_neptune2s_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA" +} diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json new file mode 100644 index 0000000000..3af4a1ea42 --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Elegoo Neptune X 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_elegoo_common", + "printer_model": "Elegoo Neptune X", + "default_print_profile": "0.20mm Standard @Elegoo NeptuneX", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Elegoo", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2.5" + ], + "retraction_speed": [ + "60" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Elegoo Generic PLA" + ], + "machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[hot_plate_temp_initial_layer] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[hot_plate_temp_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/machine/Elegoo Neptune X.json b/resources/profiles/Elegoo/machine/Elegoo Neptune X.json new file mode 100644 index 0000000000..1157ca832a --- /dev/null +++ b/resources/profiles/Elegoo/machine/Elegoo Neptune X.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Elegoo Neptune X", + "model_id": "Elegoo-Neptune-X", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Elegoo", + "bed_model": "elegoo_neptunex_buildplate_model.stl", + "bed_texture": "elegoo_neptunex_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA" +} diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json new file mode 100644 index 0000000000..d1a3bb0599 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.08", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "9", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.08", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "11", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json new file mode 100644 index 0000000000..63200f7671 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.08", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "9", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.08", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "11", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json new file mode 100644 index 0000000000..dfef27e158 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.08", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "9", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.08", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "11", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json new file mode 100644 index 0000000000..e92801bf1d --- /dev/null +++ b/resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.08", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "9", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.08", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "11", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json new file mode 100644 index 0000000000..8d281ef78e --- /dev/null +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.12", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "6", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.12", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json new file mode 100644 index 0000000000..6edc7d035a --- /dev/null +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.12", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "6", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.12", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json new file mode 100644 index 0000000000..f43bfe5a10 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.12", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "6", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.12", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json new file mode 100644 index 0000000000..eac0b78091 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.12", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "6", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.12", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json new file mode 100644 index 0000000000..cf79ff16ac --- /dev/null +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.16", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json new file mode 100644 index 0000000000..3ab4f03850 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.16", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json new file mode 100644 index 0000000000..fb2a9fea72 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.16", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json new file mode 100644 index 0000000000..d13dfe8f32 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.16", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json new file mode 100644 index 0000000000..cb9a62acda --- /dev/null +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.2", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json new file mode 100644 index 0000000000..33aab6f6ad --- /dev/null +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.2", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json new file mode 100644 index 0000000000..9ad7f54833 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.2", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json new file mode 100644 index 0000000000..d5749bce12 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.2", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.38", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json new file mode 100644 index 0000000000..692951a97c --- /dev/null +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.24", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json new file mode 100644 index 0000000000..92035a3fc7 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.24", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json new file mode 100644 index 0000000000..53ea928c64 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.24", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json new file mode 100644 index 0000000000..b9a14acade --- /dev/null +++ b/resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.24", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json new file mode 100644 index 0000000000..2a67da73c7 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Elegoo Neptune2", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.28", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.28", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json new file mode 100644 index 0000000000..7e7a9062a6 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Elegoo Neptune2D", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.28", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.28", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json new file mode 100644 index 0000000000..4342f9aec1 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Elegoo Neptune2S", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.28", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.28", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune 2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json new file mode 100644 index 0000000000..292d88f247 --- /dev/null +++ b/resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Elegoo NeptuneX", + "from": "system", + "inherits": "fdm_process_elegoo_common", + "instantiation": "true", + "layer_height": "0.28", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "200", + "top_surface_acceleration": "30", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "20", + "travel_acceleration": "200", + "inner_wall_acceleration": "200", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "1", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "25", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.28", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.2", + "support_interface_speed": "100", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Elegoo Neptune X 0.4 nozzle" + ] +} \ No newline at end of file