3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-19 06:41:14 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 5

Neptune4 profile updates, support preview image and some setting changes

Browse source
This commit is contained in:
SoftFever 2023-12-13 20:55:19 +08:00
parent dad0f348ab
commit 7393d61e8d
136 changed files with 430 additions and 1821 deletions
Download patch file Download diff file Expand all files Collapse all files

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.2 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 (0.2 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
"gcode_flavor": "klipper",
@ -64,7 +64,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.2 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.4 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 (0.4 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
"gcode_flavor": "klipper",
@ -64,7 +64,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.4 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.6 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 (0.6 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
"gcode_flavor": "klipper",
@ -64,7 +64,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.6 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.8 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 (0.8 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
"gcode_flavor": "klipper",
@ -64,7 +64,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.8 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

23
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.2 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
@ -41,23 +41,6 @@
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": ["3000", "5000"],
"machine_max_acceleration_extruding": ["5000", "20000"],
"machine_max_acceleration_retracting": ["2500", "5000"],
"machine_max_acceleration_travel": ["20000", "500"],
"machine_max_acceleration_x": ["5000", "20000"],
"machine_max_acceleration_y": ["5000", "20000"],
"machine_max_acceleration_z": ["2500", "200"],
"machine_max_speed_e": ["60", "25"],
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
"0.15"
],
@ -65,7 +48,7 @@
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],
@ -89,7 +72,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.2 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

23
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.4 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
@ -41,23 +41,6 @@
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": ["3000", "5000"],
"machine_max_acceleration_extruding": ["5000", "20000"],
"machine_max_acceleration_retracting": ["2500", "5000"],
"machine_max_acceleration_travel": ["20000", "500"],
"machine_max_acceleration_x": ["5000", "20000"],
"machine_max_acceleration_y": ["5000", "20000"],
"machine_max_acceleration_z": ["2500", "200"],
"machine_max_speed_e": ["60", "25"],
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
"0.32"
],
@ -65,7 +48,7 @@
"0.10"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],
@ -89,7 +72,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.4 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

23
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.6 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
@ -41,23 +41,6 @@
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": ["3000", "5000"],
"machine_max_acceleration_extruding": ["5000", "20000"],
"machine_max_acceleration_retracting": ["2500", "5000"],
"machine_max_acceleration_travel": ["20000", "500"],
"machine_max_acceleration_x": ["5000", "20000"],
"machine_max_acceleration_y": ["5000", "20000"],
"machine_max_acceleration_z": ["2500", "200"],
"machine_max_speed_e": ["60", "25"],
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
"0.48"
],
@ -65,7 +48,7 @@
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],
@ -89,7 +72,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.6 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

23
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.8 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
@ -41,23 +41,6 @@
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": ["3000", "5000"],
"machine_max_acceleration_extruding": ["5000", "20000"],
"machine_max_acceleration_retracting": ["2500", "5000"],
"machine_max_acceleration_travel": ["20000", "500"],
"machine_max_acceleration_x": ["5000", "20000"],
"machine_max_acceleration_y": ["5000", "20000"],
"machine_max_acceleration_z": ["2500", "200"],
"machine_max_speed_e": ["60", "25"],
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
"0.64"
],
@ -65,7 +48,7 @@
"0.20"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],
@ -89,7 +72,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.8 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

8
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.2 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
@ -52,10 +52,6 @@
"machine_max_speed_x": ["500", "500"],
"machine_max_speed_y": ["500", "500"],
"machine_max_speed_z": ["20", "20"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
@ -65,7 +61,7 @@
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],

8
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.4 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
@ -52,10 +52,6 @@
"machine_max_speed_x": ["500", "500"],
"machine_max_speed_y": ["500", "500"],
"machine_max_speed_z": ["20", "20"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
@ -65,7 +61,7 @@
"0.10"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],

8
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.6 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
@ -52,10 +52,6 @@
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
@ -65,7 +61,7 @@
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],

8
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.8 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
@ -52,10 +52,6 @@
"machine_max_speed_x": ["300", "200"],
"machine_max_speed_y": ["300", "200"],
"machine_max_speed_z": ["25", "12"],
"machine_max_jerk_e": ["2.5", "5"],
"machine_max_jerk_x": ["8", "12"],
"machine_max_jerk_y": ["8", "12"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0","0"],
"max_layer_height": [
@ -65,7 +61,7 @@
"0.20"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retract_length_toolchange": ["2"],
"deretraction_speed": ["45"],
"retract_lift_above": ["0"],

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Pro (0.2 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
"gcode_flavor": "klipper",
@ -67,7 +67,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.2 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

4
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Pro (0.4 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
"gcode_flavor": "klipper",
@ -67,7 +67,7 @@
"default_filament_profile": [
"Elegoo Generic PLA @0.4 nozzle"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

6
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Pro (0.6 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
"gcode_flavor": "klipper",
@ -33,7 +33,7 @@
"min_layer_height": ["0.08"],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": ["1"],
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retraction_length": ["2.5"],
"retraction_speed": ["25"],
"retract_length_toolchange": ["2"],
@ -42,7 +42,7 @@
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": ["Elegoo Generic PLA @0.6 nozzle"],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

6
resources/profiles/Elegoo/machine/Elegoo Neptune 4 Pro (0.8 nozzle).json
View file

@ -4,7 +4,7 @@
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"inherits": "fdm_neptune_4_common",
"printer_model": "Elegoo Neptune 4 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
@ -33,7 +33,7 @@
"min_layer_height": ["0.08"],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": ["1"],
"retract_before_wipe": ["0%"],
"retract_before_wipe": ["85%"],
"retraction_length": ["2.5"],
"retraction_speed": ["25"],
"retract_length_toolchange": ["2"],
@ -42,7 +42,7 @@
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": ["Elegoo Generic PLA @0.8 nozzle"],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",

4
resources/profiles/Elegoo/machine/fdm_elegoo_common.json
View file

@ -30,8 +30,8 @@
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
"200",
"200"
],
"machine_max_speed_e": [
"60",

2
resources/profiles/Elegoo/machine/fdm_machine_common.json
View file

@ -31,7 +31,7 @@
"500"
],
"machine_max_acceleration_z": [
"100"
"500"
],
"machine_max_speed_e": [
"60"

146
resources/profiles/Elegoo/machine/fdm_neptune_4_common.json Normal file
View file

@ -0,0 +1,146 @@
{
"type": "machine",
"name": "fdm_neptune_4_common",
"from": "system",
"instantiation": "false",
"inherits": "fdm_elegoo_common",
"gcode_flavor": "klipper",
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"10000",
"10000"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"bridge_speed": "25",
"internal_bridge_speed" : "70",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Elegoo Generic PLA"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"thumbnails": [
"320x320",
"160x160"
],
"thumbnails_format": "ColPic"
}