diff --git a/bbl/i18n/OrcaSlicer.pot b/bbl/i18n/OrcaSlicer.pot index 0413af0ee6..e6b0e5ad25 100644 --- a/bbl/i18n/OrcaSlicer.pot +++ b/bbl/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3584,6 +3584,9 @@ msgstr "" msgid "Printer settings" msgstr "" +msgid "Untitled" +msgstr "" + #, possible-boost-format msgid " plate %1%:" msgstr "" @@ -3668,9 +3671,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "" - #, possible-boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "" @@ -4254,6 +4254,9 @@ msgstr "" msgid "Print sequence" msgstr "" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7224,9 +7227,6 @@ msgid "" "print when travel move. Using spiral line to lift z can prevent stringing" msgstr "" -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -7738,12 +7738,6 @@ msgid "" "material on nozzle. This can minimize blob when print new part after travel" msgstr "" -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "" diff --git a/bbl/i18n/de/OrcaSlicer_de.po b/bbl/i18n/de/OrcaSlicer_de.po index b8f0654276..e1f09b6b99 100644 --- a/bbl/i18n/de/OrcaSlicer_de.po +++ b/bbl/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -3879,6 +3879,9 @@ msgstr "Filamenteinstellungen" msgid "Printer settings" msgstr "Drucker-Einstellungen" +msgid "Untitled" +msgstr "Unbenannt" + #, boost-format msgid " plate %1%:" msgstr " Druckplatte %1%:" @@ -3975,9 +3978,6 @@ msgstr "" "OrcaSlicer neu, um zu überprüfen, ob es ein Update für " "Systemvoreinstellungen gibt." -msgid "Untitled" -msgstr "Unbenannt" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Möchten Sie Änderungen unter \" %1% \" speichern?" @@ -4622,6 +4622,9 @@ msgstr "Gleich wie globale Drucksequenz" msgid "Print sequence" msgstr "Druckreihenfolge" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Der selbe wie der globale Betttyp" @@ -7246,6 +7249,7 @@ msgstr "" msgid "Shrinkage" msgstr "Schrumpfung" +#, fuzzy, c-format, boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling " "(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " @@ -8119,9 +8123,6 @@ msgstr "" "bei der Verfahrbewegung gegen den Druck stößt. Die Verwendung einer " "Spirallinie zum Anheben von z kann Fadenbildung verhindern" -msgid "Z Hop Type" -msgstr "Z Hop Type" - msgid "Z hop type" msgstr "Z-Hub Typ" @@ -8753,12 +8754,6 @@ msgstr "" "um ausgetretenes Material an der Düse zu reinigen. Dies kann die Bildung von " "Klecksen beim Drucken eines neuen Teils nach der Fahrt minimieren" -msgid "NormalLift" -msgstr "Normal" - -msgid "SpiralLift" -msgstr "SpiralLift" - msgid "Wipe Distance" msgstr "Wischabstand" @@ -9628,6 +9623,15 @@ msgstr "" "Wussten Sie, dass Sie mehr Wandschlaufen und eine höhere spärliche " "Fülldichte verwenden können, um die Festigkeit des Modells zu verbessern?" +#~ msgid "Z Hop Type" +#~ msgstr "Z Hop Type" + +#~ msgid "NormalLift" +#~ msgstr "Normal" + +#~ msgid "SpiralLift" +#~ msgstr "SpiralLift" + #~ msgid "select the type of Z Hop in the Slicer" #~ msgstr "Wähle den Typ des Z Hops im Slicer aus." diff --git a/bbl/i18n/en/OrcaSlicer_en.po b/bbl/i18n/en/OrcaSlicer_en.po index 4cf98994d2..b8fe6c9163 100644 --- a/bbl/i18n/en/OrcaSlicer_en.po +++ b/bbl/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3694,6 +3694,9 @@ msgstr "Filament settings" msgid "Printer settings" msgstr "Printer settings" +msgid "Untitled" +msgstr "Untitled" + #, boost-format msgid " plate %1%:" msgstr " plate %1%:" @@ -3778,9 +3781,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Untitled" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Do you want to save changes to \"%1%\"?" @@ -4377,6 +4377,9 @@ msgstr "" msgid "Print sequence" msgstr "Print sequence" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7562,9 +7565,6 @@ msgstr "" "hitting the print when traveling more. Using spiral lines to lift z can " "prevent stringing." -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8119,12 +8119,6 @@ msgstr "" "any leaked material on the nozzle. This can minimize blobs when printing a " "new part after traveling." -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Wipe distance" diff --git a/bbl/i18n/es/OrcaSlicer_es.po b/bbl/i18n/es/OrcaSlicer_es.po index 51613159c0..a6f32e778d 100644 --- a/bbl/i18n/es/OrcaSlicer_es.po +++ b/bbl/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3730,6 +3730,9 @@ msgstr "Ajustes del filamento" msgid "Printer settings" msgstr "Ajustes de la impresora" +msgid "Untitled" +msgstr "Sin título" + #, boost-format msgid " plate %1%:" msgstr " placa %1%:" @@ -3814,9 +3817,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Sin título" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "¿Quieres guardar los cambios en \"%1%\"?" @@ -4427,6 +4427,9 @@ msgstr "" msgid "Print sequence" msgstr "Secuencia de impresión" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7673,9 +7676,6 @@ msgstr "" "boquilla golpee la impresión cuando se desplaza. El uso de la línea espiral " "para levantar z puede evitar el encordado" -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8236,12 +8236,6 @@ msgstr "" "retraiga para limpiar el material filtrado en la boquilla. Esto puede " "minimizar las manchas cuando se imprime una nueva pieza después del recorrido" -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Distancia de limpieza" diff --git a/bbl/i18n/fr/OrcaSlicer_fr.po b/bbl/i18n/fr/OrcaSlicer_fr.po index d3e2289c86..a998a0e945 100644 --- a/bbl/i18n/fr/OrcaSlicer_fr.po +++ b/bbl/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: 2023-02-21 21:56+0200\n" "Last-Translator: 5axes <5axes@free.fr>\n" "Language-Team: 5axes\n" @@ -3802,6 +3802,9 @@ msgstr "Réglages du filament" msgid "Printer settings" msgstr "Paramètres de l'imprimante" +msgid "Untitled" +msgstr "Sans titre" + #, boost-format msgid " plate %1%:" msgstr " plateau %1% :" @@ -3895,9 +3898,6 @@ msgstr "" "Veuillez mettre à jour Orca Slicer ou redémarrer Orca Slicer pour vérifier " "s'il y a une mise à jour des préréglages du système." -msgid "Untitled" -msgstr "Sans titre" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Voulez-vous enregistrer les modifications apportées à \"%1%\" ?" @@ -4547,6 +4547,9 @@ msgstr "" msgid "Print sequence" msgstr "Séquence d'impression" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Identique au type de plateau global" @@ -8021,9 +8024,6 @@ msgstr "" "toucher l'impression lors du déplacement. L'utilisation d'une ligne en " "spirale pour soulever z peut empêcher l'enfilage" -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "Type de saut Z" @@ -8647,12 +8647,6 @@ msgstr "" "pour nettoyer la fuite de matériau sur la buse. Cela peut minimiser les " "marques lors de l'impression d'une nouvelle pièce après le trajet" -msgid "NormalLift" -msgstr "Retrait Normal" - -msgid "SpiralLift" -msgstr "Retriat Spiral" - msgid "Wipe Distance" msgstr "Distance d'essuyage" @@ -9505,6 +9499,12 @@ msgstr "" "Saviez-vous que vous pouvez utiliser plus de boucles de mur et une densité " "de remplissage plus élevée pour améliorer la résistance du modèle ?" +#~ msgid "NormalLift" +#~ msgstr "Retrait Normal" + +#~ msgid "SpiralLift" +#~ msgstr "Retriat Spiral" + #~ msgid "" #~ "The configuration may be generated by a newer version of BambuStudio." #~ msgstr "" diff --git a/bbl/i18n/hu/OrcaSlicer_hu.po b/bbl/i18n/hu/OrcaSlicer_hu.po index 1038824bb3..cecd118bc4 100644 --- a/bbl/i18n/hu/OrcaSlicer_hu.po +++ b/bbl/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3720,6 +3720,9 @@ msgstr "Filament beállítások" msgid "Printer settings" msgstr "Nyomtató beállítások" +msgid "Untitled" +msgstr "Névtelen" + #, boost-format msgid " plate %1%:" msgstr " %1% tálca:" @@ -3804,9 +3807,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Névtelen" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Szeretnéd elmenteni \"%1%\" változásait?" @@ -4411,6 +4411,9 @@ msgstr "" msgid "Print sequence" msgstr "Nyomtatás sorrendje" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7637,9 +7640,6 @@ msgstr "" "nagyobb mozgás közben a tárgynak ütközzön. A Z tengely emelésekor használt " "körkörös mozgás megelőzheti a szálazást." -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8204,12 +8204,6 @@ msgstr "" "a pöttyöket, amikor a nyomtatófej a mozgást követően egy egy új alkatrész " "nyomtatásába kezd." -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Törlési távolság" diff --git a/bbl/i18n/it/OrcaSlicer_it.po b/bbl/i18n/it/OrcaSlicer_it.po index fd1f178941..39781f59a3 100644 --- a/bbl/i18n/it/OrcaSlicer_it.po +++ b/bbl/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3693,6 +3693,9 @@ msgstr "Filament settings" msgid "Printer settings" msgstr "Printer settings" +msgid "Untitled" +msgstr "Senza titolo" + #, boost-format msgid " plate %1%:" msgstr " plate %1%:" @@ -3777,9 +3780,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Senza titolo" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Do you want to save changes to \"%1%\"?" @@ -4376,6 +4376,9 @@ msgstr "" msgid "Print sequence" msgstr "Print sequence" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7562,9 +7565,6 @@ msgstr "" "hitting the print when traveling more. Using spiral lines to lift z can " "prevent stringing." -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8119,12 +8119,6 @@ msgstr "" "any leaked material on the nozzle. This can minimize blobs when printing a " "new part after traveling." -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Wipe distance" diff --git a/bbl/i18n/ja/OrcaSlicer_ja.po b/bbl/i18n/ja/OrcaSlicer_ja.po index 4e107228eb..ee9cb906b0 100644 --- a/bbl/i18n/ja/OrcaSlicer_ja.po +++ b/bbl/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3682,6 +3682,9 @@ msgstr "フィラメント設定" msgid "Printer settings" msgstr "プリンター設定" +msgid "Untitled" +msgstr "名称未設定" + #, boost-format msgid " plate %1%:" msgstr "プレート%1%:" @@ -3769,9 +3772,6 @@ msgid "" "presets." msgstr "不明なフィラメントがあります、Bambu Studioを更新してください。" -msgid "Untitled" -msgstr "名称未設定" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "変更を\"%1%\"に保存しますか？" @@ -4383,6 +4383,9 @@ msgstr "" msgid "Print sequence" msgstr "造形シーケンス" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "全般設定の「ベッドタイプ」と同様" @@ -7537,9 +7540,6 @@ msgstr "" "リトラクション時に、ノズルを少し上げてから移動します。この動作でモデルとの衝" "突を回避できます。" -msgid "Z Hop Type" -msgstr "Z方向調整タイプ" - msgid "Z hop type" msgstr "" @@ -8092,12 +8092,6 @@ msgstr "" "リトラクション時に、ノズルを最後のパスに沿って移動します。この設定によって、" "たるみにより壁面のブロブを抑えることができます。" -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "拭き上げ距離" @@ -8872,6 +8866,9 @@ msgstr "" "強度の向上\n" "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。" +#~ msgid "Z Hop Type" +#~ msgstr "Z方向調整タイプ" + #~ msgid "" #~ "The configuration may be generated by a newer version of BambuStudio." #~ msgstr "" diff --git a/bbl/i18n/nl/OrcaSlicer_nl.po b/bbl/i18n/nl/OrcaSlicer_nl.po index f73fbebb18..50f167fbbd 100644 --- a/bbl/i18n/nl/OrcaSlicer_nl.po +++ b/bbl/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3736,6 +3736,9 @@ msgstr "Filament instellingen" msgid "Printer settings" msgstr "Printer instellingen" +msgid "Untitled" +msgstr "Naamloos" + #, boost-format msgid " plate %1%:" msgstr " printbed %1%:" @@ -3820,9 +3823,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Naamloos" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Wilt u de wijzigingen opslaan in \"%1%\"?" @@ -4433,6 +4433,9 @@ msgstr "" msgid "Print sequence" msgstr "Afdrukvolgorde" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7687,9 +7690,6 @@ msgstr "" "de nozzle de print raakt bij veplaatsen. Het gebruik van spiraallijnen om Z " "op te tillen kan stringing voorkomen." -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8254,12 +8254,6 @@ msgstr "" "kan \"blobs\" minimaliseren bij het printen van een nieuw onderdeel na het " "verplaatsen." -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Veeg afstand" diff --git a/bbl/i18n/sv/OrcaSlicer_sv.po b/bbl/i18n/sv/OrcaSlicer_sv.po index 669839d4db..dd8a45ac8e 100644 --- a/bbl/i18n/sv/OrcaSlicer_sv.po +++ b/bbl/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3696,6 +3696,9 @@ msgstr "Filament inställningar" msgid "Printer settings" msgstr "Skrivarens inställningar" +msgid "Untitled" +msgstr "Ej namngiven" + #, boost-format msgid " plate %1%:" msgstr " platta %1%:" @@ -3780,9 +3783,6 @@ msgid "" "presets." msgstr "" -msgid "Untitled" -msgstr "Ej namngiven" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Spara ändringarna till \"%1%\"?" @@ -4374,6 +4374,9 @@ msgstr "" msgid "Print sequence" msgstr "Utskrifts sekvens" +msgid "Plate name" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -7560,9 +7563,6 @@ msgstr "" "den förflyttas. Att använda spirallinjer för att lyfta z kan förhindra " "strängning" -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "" @@ -8115,12 +8115,6 @@ msgstr "" "för att rengöra eventuellt läckt material på nozzeln. Detta kan minimera " "blobbar när du skriver ut en ny del efter förflyttning" -msgid "NormalLift" -msgstr "" - -msgid "SpiralLift" -msgstr "" - msgid "Wipe Distance" msgstr "Avskrapnings avstånd" diff --git a/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po b/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po index 0e2cda0bcd..c9cfed9c18 100644 --- a/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po +++ b/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-03-16 21:34+0800\n" +"POT-Creation-Date: 2023-03-29 23:15+0800\n" "PO-Revision-Date: 2023-01-16 11:26+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -3663,6 +3663,9 @@ msgstr "耗材丝设置" msgid "Printer settings" msgstr "打印机设置" +msgid "Untitled" +msgstr "未命名" + #, boost-format msgid " plate %1%:" msgstr "盘%1%：" @@ -3749,9 +3752,6 @@ msgstr "" "有一些未知型号的材料，映射到通用预设。请更新或者重启 Orca Slicer，以检查系统" "预设有没有更新。" -msgid "Untitled" -msgstr "未命名" - #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "是否保存修改到“%1%”？" @@ -4346,6 +4346,9 @@ msgstr "" msgid "Print sequence" msgstr "打印顺序" +msgid "Plate name" +msgstr "盘名称" + msgid "Same as Global Bed Type" msgstr "跟随全局热床类型" @@ -7411,17 +7414,14 @@ msgstr "" "回抽完成之后，喷嘴轻微抬升，和打印件之间产生一定间隙。这能够避免空驶时喷嘴和" "打印件剐蹭和碰撞。使用螺旋线抬升z能够减少拉丝。" -msgid "Z Hop Type" -msgstr "" - msgid "Z hop type" msgstr "抬Z类型" msgid "Slope" -msgstr "" +msgstr "梯形" msgid "Spiral" -msgstr "" +msgstr "螺旋" msgid "Extra length on restart" msgstr "额外回填长度" @@ -7951,12 +7951,6 @@ msgstr "" "当回抽时，让喷嘴沿着前面的走线方向继续移动，清除掉喷嘴上的漏料。这能够避免空" "驶结束打印新的区域时产生斑点。" -msgid "NormalLift" -msgstr "直接抬Z" - -msgid "SpiralLift" -msgstr "螺旋抬Z" - msgid "Wipe Distance" msgstr "擦拭距离" @@ -8725,6 +8719,12 @@ msgstr "" "提高强度\n" "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" +#~ msgid "NormalLift" +#~ msgstr "直接抬Z" + +#~ msgid "SpiralLift" +#~ msgstr "螺旋抬Z" + #~ msgid "" #~ "The configuration may be generated by a newer version of BambuStudio." #~ msgstr "此配置可能由新版本的逆戟鲸生成。" diff --git a/resources/i18n/de/OrcaSlicer.mo b/resources/i18n/de/OrcaSlicer.mo index 265542a6e7..66995e6783 100644 Binary files a/resources/i18n/de/OrcaSlicer.mo and b/resources/i18n/de/OrcaSlicer.mo differ diff --git a/resources/i18n/fr/OrcaSlicer.mo b/resources/i18n/fr/OrcaSlicer.mo index 66ca374763..8eba697224 100644 Binary files a/resources/i18n/fr/OrcaSlicer.mo and b/resources/i18n/fr/OrcaSlicer.mo differ diff --git a/resources/i18n/ja/OrcaSlicer.mo b/resources/i18n/ja/OrcaSlicer.mo index e24d4e4ee3..ab4635630d 100644 Binary files a/resources/i18n/ja/OrcaSlicer.mo and b/resources/i18n/ja/OrcaSlicer.mo differ diff --git a/resources/i18n/zh_cn/OrcaSlicer.mo b/resources/i18n/zh_cn/OrcaSlicer.mo index 9ee123224a..07ab946999 100644 Binary files a/resources/i18n/zh_cn/OrcaSlicer.mo and b/resources/i18n/zh_cn/OrcaSlicer.mo differ diff --git a/resources/profiles/Anker/machine/fdm_machine_common.json b/resources/profiles/Anker/machine/fdm_machine_common.json index d8d6d55bd1..e39a5c6801 100644 --- a/resources/profiles/Anker/machine/fdm_machine_common.json +++ b/resources/profiles/Anker/machine/fdm_machine_common.json @@ -135,5 +135,5 @@ "wipe": [ "0" ], - "z_lift_type": "NormalLift" + "z_hop_types": "Normal Lift" } diff --git a/resources/profiles/Anycubic/machine/fdm_machine_common.json b/resources/profiles/Anycubic/machine/fdm_machine_common.json index 8c61e3039d..89cad31412 100644 --- a/resources/profiles/Anycubic/machine/fdm_machine_common.json +++ b/resources/profiles/Anycubic/machine/fdm_machine_common.json @@ -135,5 +135,5 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift" + "z_hop_types": "Normal Lift" } diff --git a/resources/profiles/Artillery/machine/fdm_machine_common.json b/resources/profiles/Artillery/machine/fdm_machine_common.json index 6f089b3793..829d928e43 100644 --- a/resources/profiles/Artillery/machine/fdm_machine_common.json +++ b/resources/profiles/Artillery/machine/fdm_machine_common.json @@ -135,5 +135,5 @@ "wipe": [ "0" ], - "z_lift_type": "NormalLift" + "z_hop_types": "Normal Lift" } diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index 298c0dec4a..c048300481 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,6 +1,6 @@ { "name": "Creality", - "version": "01.05.00.02", + "version": "01.05.01.02", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json index 8884d46f0c..0e5dbd573a 100644 --- a/resources/profiles/Creality/machine/fdm_machine_common.json +++ b/resources/profiles/Creality/machine/fdm_machine_common.json @@ -110,7 +110,7 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", + "z_hop_types": "Normal Lift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index bf039a5b57..5da4f75161 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "01.04.04.00", + "version": "01.05.04.00", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ diff --git a/resources/profiles/Prusa/machine/Prusa MINI.json b/resources/profiles/Prusa/machine/Prusa MINI.json index 131980e59d..6cdd89a5a5 100644 --- a/resources/profiles/Prusa/machine/Prusa MINI.json +++ b/resources/profiles/Prusa/machine/Prusa MINI.json @@ -5,7 +5,7 @@ "nozzle_diameter": "0.4", "machine_tech": "FFF", "family": "Prusa", - "bed_model": "", + "bed_model": "mini_bed.stl", "bed_texture": "mini.svg", "hotend_model": "bbl-3dp-hotend.stl", "default_materials": "Prusa Generic ABS;Prusa Generic PLA;Prusa Generic PLA-CF;Prusa Generic PETG;Prusa Generic TPU;Prusa Generic ASA;Prusa Generic PC;Prusa Generic PVA;Prusa Generic PA;Prusa Generic PA-CF" diff --git a/resources/profiles/Prusa/mk3.svg b/resources/profiles/Prusa/mk3.svg index 678213ac5f..fda3e3423e 100644 --- a/resources/profiles/Prusa/mk3.svg +++ b/resources/profiles/Prusa/mk3.svg @@ -26,758 +26,7 @@ id="defs3132" /> MK3_bottom - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - s_Preset_printer_options { "print_host_webui", "printhost_cafile","printhost_port","printhost_authorization_type", "printhost_user", "printhost_password", "printhost_ssl_ignore_revoke", - "z_lift_type", "thumbnails", - "use_firmware_retraction", "use_relative_e_distances" + "thumbnails", "use_firmware_retraction", "use_relative_e_distances" }; static std::vector s_Preset_sla_print_options { diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index dc8017d76e..2f3a32acfb 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -141,7 +141,6 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n "filament_start_gcode", "change_filament_gcode", "wipe", - "z_lift_type", // BBS "wipe_distance", "curr_bed_type", diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index c9fd18b303..cbf7060f94 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -107,14 +107,6 @@ static t_config_enum_values s_keys_map_GCodeFlavor { CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(GCodeFlavor) -static t_config_enum_values s_keys_map_LiftType { - { "NormalLift", int(LiftType::NormalLift) }, - { "LazyLift", int(LiftType::LazyLift) }, - { "SpiralLift", int(LiftType::SpiralLift) } -}; -CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(LiftType) - - static t_config_enum_values s_keys_map_FuzzySkinType { { "none", int(FuzzySkinType::None) }, { "external", int(FuzzySkinType::External) }, @@ -2452,7 +2444,7 @@ void PrintConfigDef::init_fff_params() def->set_default_value(new ConfigOptionFloats { 0.4 }); def = this->add("z_hop_types", coEnums); - def->label = L("Z Hop Type"); + def->label = L("Z hop type"); def->tooltip = L("Z hop type"); def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("Auto Lift"); @@ -2464,7 +2456,7 @@ void PrintConfigDef::init_fff_params() def->enum_labels.push_back(L("Slope")); def->enum_labels.push_back(L("Spiral")); def->mode = comAdvanced; - def->set_default_value(new ConfigOptionEnumsGeneric{ ZHopType::zhtSpiral }); + def->set_default_value(new ConfigOptionEnumsGeneric{ ZHopType::zhtNormal }); def = this->add("retract_restart_extra", coFloats); def->label = L("Extra length on restart"); @@ -3232,19 +3224,6 @@ void PrintConfigDef::init_fff_params() def->mode = comAdvanced; def->set_default_value(new ConfigOptionBools { false }); - def = this->add("z_lift_type", coEnum); - def->label = L("Z hop type"); - def->tooltip = L("Z hop type"); - def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); - def->enum_values.push_back("NormalLift"); - def->enum_values.push_back("SpiralLift"); - // def->enum_values.push_back("LazyLift"); - def->enum_labels.push_back(L("NormalLift")); - def->enum_labels.push_back(L("SpiralLift")); - // def->enum_labels.push_back(L("LazyLift")); - def->mode = comAdvanced; - def->set_default_value(new ConfigOptionEnum(LiftType::SpiralLift)); - def = this->add("wipe_distance", coFloats); def->label = L("Wipe Distance"); def->tooltip = L("Discribe how long the nozzle will move along the last path when retracting"); @@ -4308,7 +4287,7 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va "remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration", "support_transition_line_width", "support_transition_speed", "bed_temperature", "bed_temperature_initial_layer", "can_switch_nozzle_type", "can_add_auxiliary_fan", "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height", - "z_hop_type" + "z_hop_type", "z_lift_type" }; if (ignore.find(opt_key) != ignore.end()) {