mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-08-07 14:04:11 -06:00
QOL improvments to Ender 3 V3 KE G-Code (#4675)
* Add M420 S1; Enable mesh leveling * Implament various improvments * Readd F1500.0 & end the second pass a bit shorter * Remove extra \n's * Remove \nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800 * Misc Enable arc fitting Support line width to 0.42 Elephant foot compensation to 0.15 * Apply given settings * Enable infill combination * Change wipe_distance to 2 * Reduce elephant foot compensation to 0.1 * Adjust bridging & overhang speeds & disable retract before wipe * Tune speed & max values * Change min_layer_height & support z distance * revert min_layer_height
This commit is contained in:
cochcoder
GitHub
parent
a5a5c3c408
commit
70427e1c3f
5 changed files with 94 additions and 91 deletions
|
|
@ -47,12 +47,12 @@
|
|||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"100",
|
||||
"100"
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
|
|
@ -71,12 +71,12 @@
|
|||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"10"
|
||||
"7",
|
||||
"7"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"10"
|
||||
"7",
|
||||
"7"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
|
|
@ -91,8 +91,11 @@
|
|||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
|
|
@ -116,11 +119,11 @@
|
|||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X-1.7 Y30 Z0.28 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z20 ;Raise Z more\nG90 ;Absolute positionning\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
|
||||
"scan_first_layer": "0",
|
||||
"thumbnails": [
|
||||
"96x96",
|
||||
"300x300"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "100",
|
||||
"bridge_speed": "65",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
|
|
@ -23,21 +23,21 @@
|
|||
"top_surface_acceleration": "5000",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_combination": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
|
|
@ -49,10 +49,10 @@
|
|||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "35",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.42",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
|
|
@ -69,9 +69,9 @@
|
|||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.38",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "4",
|
||||
|
|
@ -88,30 +88,30 @@
|
|||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "250",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "250",
|
||||
"gap_infill_speed": "100",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "300",
|
||||
"travel_speed": "300",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"default_jerk": "7",
|
||||
"outer_wall_jerk": "8",
|
||||
"outer_wall_jerk": "7",
|
||||
"inner_wall_jerk": "7",
|
||||
"infill_jerk": "8",
|
||||
"infill_jerk": "7",
|
||||
"top_surface_jerk": "7",
|
||||
"initial_layer_jerk": "7",
|
||||
"travel_jerk": "8",
|
||||
"travel_jerk": "7",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "100",
|
||||
"bridge_speed": "65",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
|
|
@ -23,21 +23,21 @@
|
|||
"top_surface_acceleration": "5000",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_combination": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
|
|
@ -49,10 +49,10 @@
|
|||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "35",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.42",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
|
|
@ -71,7 +71,7 @@
|
|||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.38",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
|
|
@ -88,30 +88,30 @@
|
|||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "250",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "250",
|
||||
"gap_infill_speed": "100",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "300",
|
||||
"travel_speed": "300",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"default_jerk": "7",
|
||||
"outer_wall_jerk": "8",
|
||||
"outer_wall_jerk": "7",
|
||||
"inner_wall_jerk": "7",
|
||||
"infill_jerk": "8",
|
||||
"infill_jerk": "7",
|
||||
"top_surface_jerk": "7",
|
||||
"initial_layer_jerk": "7",
|
||||
"travel_jerk": "8",
|
||||
"travel_jerk": "7",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "100",
|
||||
"bridge_speed": "65",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
|
|
@ -23,21 +23,21 @@
|
|||
"top_surface_acceleration": "5000",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_combination": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
|
|
@ -49,10 +49,10 @@
|
|||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "35",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.42",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
|
|
@ -69,9 +69,9 @@
|
|||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.38",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
|
|
@ -88,30 +88,30 @@
|
|||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "250",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "250",
|
||||
"gap_infill_speed": "100",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "300",
|
||||
"travel_speed": "300",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"default_jerk": "7",
|
||||
"outer_wall_jerk": "8",
|
||||
"outer_wall_jerk": "7",
|
||||
"inner_wall_jerk": "7",
|
||||
"infill_jerk": "8",
|
||||
"infill_jerk": "7",
|
||||
"top_surface_jerk": "7",
|
||||
"initial_layer_jerk": "7",
|
||||
"travel_jerk": "8",
|
||||
"travel_jerk": "7",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "100",
|
||||
"bridge_speed": "65",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
|
|
@ -23,21 +23,21 @@
|
|||
"top_surface_acceleration": "5000",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"enable_arc_fitting": "1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"travel_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_combination": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
|
|
@ -49,10 +49,10 @@
|
|||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "35",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.42",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
|
|
@ -69,9 +69,9 @@
|
|||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.38",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
|
|
@ -88,30 +88,30 @@
|
|||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "250",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "250",
|
||||
"gap_infill_speed": "100",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "300",
|
||||
"travel_speed": "300",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"default_jerk": "7",
|
||||
"outer_wall_jerk": "8",
|
||||
"outer_wall_jerk": "7",
|
||||
"inner_wall_jerk": "7",
|
||||
"infill_jerk": "8",
|
||||
"infill_jerk": "7",
|
||||
"top_surface_jerk": "7",
|
||||
"initial_layer_jerk": "7",
|
||||
"travel_jerk": "8",
|
||||
"travel_jerk": "7",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue