diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.25 nozzle.json
index 5dff012e13..c31ffb76da 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.25 nozzle.json	
@@ -11,7 +11,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["100"],
   "hot_plate_temp_initial_layer": ["100"],
-  "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge ABS Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge ABS Basic @FF G4P 0.25 nozzle",
   "pressure_advance": ["0.04"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.6 nozzle.json
index 3844672339..fa15d18d38 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ABS Basic @FF G4P 0.6 nozzle.json	
@@ -1,44 +1,107 @@
 {
-  "activate_air_filtration": ["1"],
-  "activate_chamber_temp_control": ["1"],
-  "chamber_temperature": ["60"],
-  "complete_print_exhaust_fan_speed": ["40"],
-  "cool_plate_temp": ["0"],
-  "cool_plate_temp_initial_layer": ["0"],
-  "during_print_exhaust_fan_speed": ["40"],
-  "eng_plate_temp": ["115"],
-  "eng_plate_temp_initial_layer": ["115"],
-  "fan_cooling_layer_time": ["35"],
-  "fan_max_speed": ["60"],
-  "fan_min_speed": ["25"],
-  "filament_cost": ["30"],
-  "filament_flow_ratio": ["0.95"],
-  "filament_load_time": ["29"],
-  "filament_max_volumetric_speed": ["28"],
-  "filament_minimal_purge_on_wipe_tower": ["15"],
-  "filament_settings_id": ["Flashforge ABS Basic @FF G4P 0.6 nozzle"],
-  "filament_start_gcode": [
-    "; filament start gcode\n;right_extruder_material:ABS"
-  ],
-  "filament_unload_time": ["29"],
-  "from": "system",
-  "instantiation": "true",
-  "compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
-  "hot_plate_temp": ["115"],
-  "hot_plate_temp_initial_layer": ["115"],
-  "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
-  "is_custom_defined": "0",
-  "tujiawei": null,
-  "name": "Flashforge ABS Basic @FF G4P 0.6 nozzle",
-  "nozzle_temperature": ["260"],
-  "nozzle_temperature_initial_layer": ["260"],
-  "nozzle_temperature_range_high": ["280"],
-  "overhang_fan_speed": ["90"],
-  "pressure_advance": ["0.025"],
-  "slow_down_layer_time": ["10"],
-  "slow_down_min_speed": ["20"],
-  "support_material_interface_fan_speed": ["90"],
-  "textured_plate_temp": ["115"],
-  "textured_plate_temp_initial_layer": ["115"],
-  "version": "2.1.1.0"
-}
+    "activate_air_filtration": [
+        "1"
+    ],
+    "activate_chamber_temp_control": [
+        "1"
+    ],
+    "chamber_temperature": [
+        "60"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "40"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "40"
+    ],
+    "eng_plate_temp": [
+        "115"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "115"
+    ],
+    "fan_cooling_layer_time": [
+        "35"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_load_time": [
+        "29"
+    ],
+    "filament_max_volumetric_speed": [
+        "28"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_settings_id": [
+        "Flashforge ABS Basic @FF G4P 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n;right_extruder_material:ABS"
+    ],
+    "filament_unload_time": [
+        "29"
+    ],
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Flashforge Guider4 Pro 0.6 nozzle"
+    ],
+    "hot_plate_temp": [
+        "115"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "115"
+    ],
+    "inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
+    "is_custom_defined": "0",
+    "name": "Flashforge ABS Basic @FF G4P 0.6 nozzle",
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "support_material_interface_fan_speed": [
+        "90"
+    ],
+    "textured_plate_temp": [
+        "115"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "115"
+    ],
+    "version": "2.1.1.0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json
index 23d675893d..00826c6725 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json	
@@ -17,7 +17,7 @@
   "compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
   "hot_plate_temp": ["100"],
   "hot_plate_temp_initial_layer": ["100"],
-  "inherits": "Flashforge Generic ASA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge ASA Basic @FF AD5X",
   "is_custom_defined": "0",
   "name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle",
   "nozzle_temperature_initial_layer": ["265"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF G4P 0.25 nozzle.json
index 78322973bb..f19a581e36 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge ASA Basic @FF G4P 0.25 nozzle.json	
@@ -15,7 +15,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["100"],
   "hot_plate_temp_initial_layer": ["100"],
-  "inherits": "Flashforge ABS @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge ASA Basic @FF AD5X",
   "is_custom_defined": "0",
   "name": "Flashforge ASA Basic @FF G4P 0.25 nozzle",
   "pressure_advance": ["0.04"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PETG @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PETG @FF G4P 0.25 nozzle.json
index fab856ec05..317ca85c48 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PETG @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PETG @FF G4P 0.25 nozzle.json	
@@ -14,7 +14,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["80"],
   "hot_plate_temp_initial_layer": ["80"],
-  "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge HS PETG @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge HS PETG @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["230"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PLA @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PLA @FF G4P 0.25 nozzle.json
index ea97967ae5..d037344923 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PLA @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge HS PLA @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge HS PLA @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Pro @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Pro @FF G4P 0.25 nozzle.json
index ad76b2e3c7..6c7ed7eebb 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Pro @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Pro @FF G4P 0.25 nozzle.json	
@@ -14,7 +14,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["80"],
   "hot_plate_temp_initial_layer": ["80"],
-  "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PETG Pro @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PETG Pro @FF G4P 0.25 nozzle",
   "pressure_advance": ["0.045"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json
index c23eb98c98..bcfba9e700 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PETG Transparent @FF G4P 0.25 nozzle.json	
@@ -14,7 +14,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["80"],
   "hot_plate_temp_initial_layer": ["80"],
-  "inherits": "Flashforge PETG @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PETG Transparent @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PETG Transparent @FF G4P 0.25 nozzle",
   "pressure_advance": ["0.045"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json
index 55b0e09093..c574e35fed 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json	
@@ -14,7 +14,7 @@
   "compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
   "hot_plate_temp": ["60"],
   "hot_plate_temp_initial_layer": ["60"],
-  "inherits": "Flashforge PLA Basic",
+  "inherits": "Flashforge Generic PLA",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json
index 18d724ba49..3645b0f196 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json	
@@ -4,7 +4,6 @@
   "filament_flow_ratio": ["1"],
   "filament_load_time": ["29"],
   "filament_max_volumetric_speed": ["21"],
-  "filament_settings_id": ["Flashforge PLA Basic @FF AD5X 0.6 nozzle"],
   "filament_unload_time": ["29"],
   "from": "system",
   "setting_id": "FFFP03_02",
@@ -12,7 +11,7 @@
   "compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
   "hot_plate_temp": ["60"],
   "hot_plate_temp_initial_layer": ["60"],
-  "inherits": "Flashforge PLA Basic",
+  "inherits": "Flashforge Generic PLA",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Basic @FF AD5X 0.6 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json
index d84741db86..cbf6c2a2c6 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
   "hot_plate_temp": ["60"],
   "hot_plate_temp_initial_layer": ["60"],
-  "inherits": "Flashforge PLA Basic",
+  "inherits": "Flashforge Generic PLA",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Basic @FF AD5X 0.8 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X.json
index 3fe602bfff..56e33dcc65 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF AD5X.json	
@@ -11,7 +11,7 @@
   "instantiation": "true",
   "hot_plate_temp": ["60"],
   "hot_plate_temp_initial_layer": ["60"],
-  "inherits": "Flashforge PLA Basic",
+  "inherits": "Flashforge Generic PLA",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Basic @FF AD5X",
   "compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF G4P 0.25 nozzle.json
index 594333ab30..4dc79be652 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Basic @FF G4P 0.25 nozzle.json	
@@ -5,14 +5,13 @@
   "filament_flow_ratio": ["0.97"],
   "filament_load_time": ["29"],
   "filament_max_volumetric_speed": ["12"],
-  "filament_settings_id": ["Flashforge PLA Basic @FF G4P 0.25 nozzle"],
   "filament_unload_time": ["29"],
   "from": "system",
   "instantiation": "true",
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Basic @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json
index 67c580055e..c82afd0867 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json
index 8731815557..96cb753d2b 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json
index acac411c8e..9daf3ce87d 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Matte @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Matte @FF G4P 0.25 nozzle.json
index a9e91dc942..fe2bd2cb8c 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Matte @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Matte @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Matte @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Metal @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Metal @FF G4P 0.25 nozzle.json
index e00b1cf798..c0887ecd2f 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Metal @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Metal @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Metal @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Pro @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Pro @FF G4P 0.25 nozzle.json
index 2e3828ed7d..aae0c2b1cb 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Pro @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Pro @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Pro @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Silk @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Silk @FF G4P 0.25 nozzle.json
index 66e38fc398..e2956c5a36 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Silk @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Silk @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Silk @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],
diff --git a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json
index 1f1db3e04a..56ba5849ff 100644
--- a/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json	
@@ -12,7 +12,7 @@
   "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "hot_plate_temp": ["55"],
   "hot_plate_temp_initial_layer": ["55"],
-  "inherits": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+  "inherits": "Flashforge PLA Basic @FF G4P",
   "is_custom_defined": "0",
   "name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle",
   "nozzle_temperature": ["210"],