3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-13 17:58:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

SEMM: Introduced parameter to control the maximum speed used for purging in the purge tower (#5304)

Browse source 
* Max wipe tower purge print speed for SEMM

* Max wipe tower purge print speed for SEMM

* Merge branch 'dev-branch' of https://github.com/igiannakas/OrcaSlicer into dev-branch

* Updated float calculation

* Updated float calculation

* Updated tooltip

* Updated label
This commit is contained in:
Ioannis Giannakas 2024-05-09 16:21:06 +01:00 • committed by GitHub
parent de5c1c80e3
commit 6920a88e58
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
9 changed files with 22 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

5
src/libslic3r/GCode/WipeTower2.cpp
View file

@ -550,7 +550,8 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau
m_infill_speed(default_region_config.sparse_infill_speed),
m_perimeter_speed(default_region_config.inner_wall_speed),
m_current_tool(initial_tool),
wipe_volumes(wiping_matrix)
wipe_volumes(wiping_matrix),
m_wipe_tower_max_purge_speed(float(config.wipe_tower_max_purge_speed))
{
// Read absolute value of first layer speed, if given as percentage,
// it is taken over following default. Speeds from config are not
@ -1099,7 +1100,7 @@ void WipeTower2::toolchange_Wipe(
// All the calculations in all other places take the spacing into account for all the layers.
// If spare layers are excluded->if 1 or less toolchange has been done, it must be sill the first layer, too.So slow down.
const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers) ? m_first_layer_speed * 60.f : std::min(5400.f, m_infill_speed * 60.f);
const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers) ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f);
float wipe_speed = 0.33f * target_speed;
// if there is less than 2.5*m_perimeter_width to the edge, advance straightaway (there is likely a blob anyway)