3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-19 23:01:22 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

Included the velocity, acceleration and jerk settings into the Prusa3D

Browse source 
printer profiles.
This commit is contained in:
bubnikv 2018-01-06 15:23:02 +01:00
parent 7012c04005
commit 60a6e7ba8e
4 changed files with 21 additions and 21 deletions
Download patch file Download diff file Expand all files Collapse all files

4
resources/profiles/Original Prusa i3 MK3.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r Prusa Edition 1.38.6 on 2018-01-05 at 15:21:29
# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:12:34
[print:0.05mm DETAIL]
avoid_crossing_perimeters = 0
@ -3280,7 +3280,7 @@ retract_speed = 35
serial_port =
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95
start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X15 Y15 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1