diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 4cef61b11b..e54b694b30 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1085,6 +1085,10 @@
             "name": "Bambu PLA Tough @base",
             "sub_path": "filament/Bambu PLA Tough @base.json"
         },
+        {
+            "name": "Bambu PLA Tough+ @base",
+            "sub_path": "filament/Bambu PLA Tough+ @base.json"
+        },
         {
             "name": "Bambu PLA Translucent @base",
             "sub_path": "filament/Bambu PLA Translucent @base.json"
@@ -2913,6 +2917,62 @@
             "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json"
         },
+        {
+            "name": "Bambu PLA Tough+ @BBL A1",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL A1.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL A1M",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL H2D",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL H2D.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL P1P",
+            "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle",
+            "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL X1",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL X1.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL X1C",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL X1C.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle",
+            "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json"
+        },
         {
             "name": "Bambu PLA Translucent @BBL A1",
             "sub_path": "filament/Bambu PLA Translucent @BBL A1.json"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json
new file mode 100644
index 0000000000..e99518ff40
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_00",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json
new file mode 100644
index 0000000000..c87e1b3c59
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json	
@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL A1",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_01",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json
new file mode 100644
index 0000000000..2b8ab78db2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_02",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json
new file mode 100644
index 0000000000..9a61607c47
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json	
@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL A1M",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_03",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json
new file mode 100644
index 0000000000..2e99f9e8c9
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json	
@@ -0,0 +1,148 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_04",
+    "instantiation": "true",
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "1",
+        "1"
+    ],
+    "nozzle_temperature": [
+        "245",
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245",
+        "220"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json
new file mode 100644
index 0000000000..e27d0a29fb
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json	
@@ -0,0 +1,164 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_05",
+    "instantiation": "true",
+    "counter_coef_2": [
+        "0.003"
+    ],
+    "counter_coef_3": [
+        "0.01"
+    ],
+    "counter_limit_max": [
+        "0.088"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "40"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_extruder_id": [
+        "1",
+        "1"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "hole_coef_3": [
+        "0.18"
+    ],
+    "long_retractions_when_ec": [
+        "1",
+        "1"
+    ],
+    "nozzle_temperature": [
+        "245",
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245",
+        "220"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json
new file mode 100644
index 0000000000..509f33c306
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json	
@@ -0,0 +1,148 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_06",
+    "instantiation": "true",
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "45"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "1",
+        "1"
+    ],
+    "nozzle_temperature": [
+        "245",
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245",
+        "220"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json
new file mode 100644
index 0000000000..e15ceba36e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json	
@@ -0,0 +1,160 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL H2D",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_07",
+    "instantiation": "true",
+    "counter_coef_2": [
+        "0.003"
+    ],
+    "counter_coef_3": [
+        "0.01"
+    ],
+    "counter_limit_max": [
+        "0.088"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "21",
+        "35"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "hole_coef_3": [
+        "0.18"
+    ],
+    "long_retractions_when_ec": [
+        "1",
+        "1"
+    ],
+    "nozzle_temperature": [
+        "245",
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245",
+        "220"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json
new file mode 100644
index 0000000000..094690fe56
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL X1",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_29",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json
new file mode 100644
index 0000000000..4b5fe2b3fc
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_30",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab X1E 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json
new file mode 100644
index 0000000000..53bbe272a1
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json	
@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_31",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json
new file mode 100644
index 0000000000..6f362dae00
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL X1C",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_32",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json
new file mode 100644
index 0000000000..9c3aa4f0cb
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json	
@@ -0,0 +1,56 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA10",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "80"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.21"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_change_length": [
+        "5"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "impact_strength_z": [
+        "13.8"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json
new file mode 100644
index 0000000000..1bf91bfd15
--- /dev/null
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_33",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json
new file mode 100644
index 0000000000..63cdcf71e0
--- /dev/null
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json	
@@ -0,0 +1,43 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough+ @BBL P1P",
+    "inherits": "Bambu PLA Tough+ @base",
+    "from": "system",
+    "setting_id": "GFSA10_34",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "90"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file