diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 7da1749deb..356da0b297 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "01.09.00.23", + "version": "01.10.00.26", "force_update": "0", "description": "the initial version of BBL configurations", "machine_model_list": [ @@ -674,8 +674,8 @@ "sub_path": "filament/fdm_filament_bvoh.json" }, { - "name": "fdm_filament_sbs", - "sub_path": "filament/fdm_filament_sbs.json" + "name": "fdm_filament_sbs", + "sub_path": "filament/fdm_filament_sbs.json" }, { "name": "Bambu PLA Matte @base", @@ -738,8 +738,8 @@ "sub_path": "filament/Generic PLA-CF @base.json" }, { - "name": "Generic SBS @base", - "sub_path": "filament/Generic SBS @base.json" + "name": "Generic SBS @base", + "sub_path": "filament/Generic SBS @base.json" }, { "name": "Bambu PLA-CF @base", @@ -797,6 +797,14 @@ "name": "Bambu TPU 95A HF @base", "sub_path": "filament/Bambu TPU 95A HF @base.json" }, + { + "name": "Generic TPU for AMS @base", + "sub_path": "filament/Generic TPU for AMS @base.json" + }, + { + "name": "Bambu TPU for AMS @base", + "sub_path": "filament/Bambu TPU for AMS @base.json" + }, { "name": "Bambu PETG Basic @base", "sub_path": "filament/Bambu PETG Basic @base.json" @@ -833,6 +841,22 @@ "name": "Bambu PETG HF @base", "sub_path": "filament/Bambu PETG HF @base.json" }, + { + "name": "Fiberon PETG-ESD @base", + "sub_path": "filament/Fiberon PETG-ESD @base.json" + }, + { + "name": "Fiberon PETG-rCF @base", + "sub_path": "filament/Fiberon PETG-rCF @base.json" + }, + { + "name": "Fiberon PET-CF @base", + "sub_path": "filament/Fiberon PET-CF @base.json" + }, + { + "name": "Generic PETG HF @base", + "sub_path": "filament/Generic PETG HF @base.json" + }, { "name": "Bambu ABS @base", "sub_path": "filament/Bambu ABS @base.json" @@ -877,6 +901,10 @@ "name": "Bambu ASA-Aero @base", "sub_path": "filament/Bambu ASA-Aero @base.json" }, + { + "name": "Bambu ASA-CF @base", + "sub_path": "filament/Bambu ASA-CF @base.json" + }, { "name": "Generic PVA @base", "sub_path": "filament/Generic PVA @base.json" @@ -925,6 +953,22 @@ "name": "Bambu PA6-GF @base", "sub_path": "filament/Bambu PA6-GF @base.json" }, + { + "name": "Fiberon PA6-CF @base", + "sub_path": "filament/Fiberon PA6-CF @base.json" + }, + { + "name": "Fiberon PA6-GF @base", + "sub_path": "filament/Fiberon PA6-GF @base.json" + }, + { + "name": "Fiberon PA12-CF @base", + "sub_path": "filament/Fiberon PA12-CF @base.json" + }, + { + "name": "Fiberon PA612-CF @base", + "sub_path": "filament/Fiberon PA612-CF @base.json" + }, { "name": "Generic HIPS @base", "sub_path": "filament/Generic HIPS @base.json" @@ -1406,8 +1450,8 @@ "sub_path": "filament/Generic PLA-CF @BBL A1.json" }, { - "name": "Generic SBS", - "sub_path": "filament/Generic SBS.json" + "name": "Generic SBS", + "sub_path": "filament/Generic SBS.json" }, { "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", @@ -1745,6 +1789,38 @@ "name": "Bambu TPU 95A HF @BBL A1", "sub_path": "filament/Bambu TPU 95A HF @BBL A1.json" }, + { + "name": "Generic TPU for AMS @BBL X1C", + "sub_path": "filament/Generic TPU for AMS @BBL X1C.json" + }, + { + "name": "Generic TPU for AMS @BBL P1P", + "sub_path": "filament/Generic TPU for AMS @BBL P1P.json" + }, + { + "name": "Generic TPU for AMS @BBL A1", + "sub_path": "filament/Generic TPU for AMS @BBL A1.json" + }, + { + "name": "Generic TPU for AMS @BBL A1M", + "sub_path": "filament/Generic TPU for AMS @BBL A1M.json" + }, + { + "name": "Bambu TPU for AMS @BBL X1C", + "sub_path": "filament/Bambu TPU for AMS @BBL X1C.json" + }, + { + "name": "Bambu TPU for AMS @BBL P1P", + "sub_path": "filament/Bambu TPU for AMS @BBL P1P.json" + }, + { + "name": "Bambu TPU for AMS @BBL A1", + "sub_path": "filament/Bambu TPU for AMS @BBL A1.json" + }, + { + "name": "Bambu TPU for AMS @BBL A1M", + "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json" + }, { "name": "Bambu PETG Basic @BBL X1C", "sub_path": "filament/Bambu PETG Basic @BBL X1C.json" @@ -1945,6 +2021,50 @@ "name": "Generic PCTG @BBL A1M", "sub_path": "filament/Generic PCTG @BBL A1M.json" }, + { + "name": "Fiberon PETG-ESD @BBL X1C", + "sub_path": "filament/Fiberon PETG-ESD @BBL X1C.json" + }, + { + "name": "Fiberon PETG-rCF @BBL X1C", + "sub_path": "filament/Fiberon PETG-rCF @BBL X1C.json" + }, + { + "name": "Fiberon PET-CF @BBL X1C", + "sub_path": "filament/Fiberon PET-CF @BBL X1C.json" + }, + { + "name": "Generic PETG HF @BBL X1C", + "sub_path": "filament/Generic PETG HF @BBL X1C.json" + }, + { + "name": "Generic PETG HF @BBL X1C 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P1P", + "sub_path": "filament/Generic PETG HF @BBL P1P.json" + }, + { + "name": "Generic PETG HF @BBL P1P 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL A1", + "sub_path": "filament/Generic PETG HF @BBL A1.json" + }, + { + "name": "Generic PETG HF @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL A1M", + "sub_path": "filament/Generic PETG HF @BBL A1M.json" + }, + { + "name": "Generic PETG HF @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json" + }, { "name": "Bambu ABS @BBL X1C", "sub_path": "filament/Bambu ABS @BBL X1C.json" @@ -2173,6 +2293,30 @@ "name": "Bambu ASA-Aero @BBL A1", "sub_path": "filament/Bambu ASA-Aero @BBL A1.json" }, + { + "name": "Bambu ASA-CF @BBL X1C", + "sub_path": "filament/Bambu ASA-CF @BBL X1C.json" + }, + { + "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL P1P", + "sub_path": "filament/Bambu ASA-CF @BBL P1P.json" + }, + { + "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL A1", + "sub_path": "filament/Bambu ASA-CF @BBL A1.json" + }, + { + "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json" + }, { "name": "Generic PVA @0.2 nozzle", "sub_path": "filament/Generic PVA @0.2 nozzle.json" @@ -2321,6 +2465,22 @@ "name": "Bambu PA6-GF @BBL A1", "sub_path": "filament/Bambu PA6-GF @BBL A1.json" }, + { + "name": "Fiberon PA6-CF @BBL X1C", + "sub_path": "filament/Fiberon PA6-CF @BBL X1C.json" + }, + { + "name": "Fiberon PA6-GF @BBL X1C", + "sub_path": "filament/Fiberon PA6-GF @BBL X1C.json" + }, + { + "name": "Fiberon PA12-CF @BBL X1C", + "sub_path": "filament/Fiberon PA12-CF @BBL X1C.json" + }, + { + "name": "Fiberon PA612-CF @BBL X1C", + "sub_path": "filament/Fiberon PA612-CF @BBL X1C.json" + }, { "name": "Generic HIPS @BBL X1C", "sub_path": "filament/Generic HIPS @BBL X1C.json" diff --git a/resources/profiles/BBL/cli_config.json b/resources/profiles/BBL/cli_config.json index 2bd68647c9..7c75b738d8 100644 --- a/resources/profiles/BBL/cli_config.json +++ b/resources/profiles/BBL/cli_config.json @@ -75,80 +75,100 @@ "Bambu Lab X1": { "downward_check": { "Bambu Lab X1 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle" + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle" ], "Bambu Lab X1 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle" + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle" ], "Bambu Lab X1 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle" + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle" ], "Bambu Lab X1 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle" + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle" ] } }, "Bambu Lab X1 Carbon": { "downward_check": { "Bambu Lab X1 Carbon 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle" + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle" ], "Bambu Lab X1 Carbon 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle" + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle" ], "Bambu Lab X1 Carbon 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle" + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle" ], "Bambu Lab X1 Carbon 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle" + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle" ] } }, "Bambu Lab X1E": { "downward_check": { "Bambu Lab X1E 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle" + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle" ], "Bambu Lab X1E 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle" + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle" ], "Bambu Lab X1E 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle" + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle" ], "Bambu Lab X1E 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle" + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle" ] } }, "Bambu Lab P1P": { "downward_check": { "Bambu Lab P1P 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle" + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle" ], "Bambu Lab P1P 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle" + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle" ], "Bambu Lab P1P 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle" + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle" ], "Bambu Lab P1P 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle" + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle" ] } }, "Bambu Lab P1S": { "downward_check": { "Bambu Lab P1S 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle" + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle" ], "Bambu Lab P1S 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle" + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle" ], "Bambu Lab P1S 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle" + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle" ], "Bambu Lab P1S 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle" + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle" ] } } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json index 413d8ce795..3282b698e7 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json index f85009c07b..6d34d11f22 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json index f21efe7f80..ae2331a947 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json index 6145a910b6..fa8c04cf9f 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "260" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json index 88ad1a408f..cef6534784 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json index a185e7cf80..f5d8680b06 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS @base.json @@ -5,12 +5,13 @@ "from": "system", "filament_id": "GFB00", "instantiation": "false", - "filament_flow_ratio": [ - "0.95" - ], + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ "24.99" ], + "filament_flow_ratio": [ + "0.95" + ], "filament_vendor": [ "Bambu Lab" ] diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json index ff5f41cae7..aee4e52a01 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSB50_02", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", "Bambu Lab A1 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json index 37acd12522..8a51aedb7e 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSB50_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json index 89916b17b3..173f63007d 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSB50_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json index 777cf85080..a67aa45465 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFB50", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "12" ], @@ -17,15 +18,15 @@ "filament_density": [ "1.08" ], - "filament_type": [ - "ABS-GF" - ], "filament_flow_ratio": [ "0.95" ], "filament_max_volumetric_speed": [ "12" ], + "filament_type": [ + "ABS-GF" + ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json index e67d7d90e0..52d1c45a6b 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSB01_10", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json index 9c92e7653b..97017c4fa3 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json @@ -8,6 +8,12 @@ "chamber_temperatures": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab A1 0.4 nozzle" ] diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json index 916abbfbe3..8aa9d6f38b 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json @@ -8,6 +8,12 @@ "fan_min_speed": [ "25" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab A1 0.6 nozzle", "Bambu Lab A1 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json index 90b80ac8dc..954cdc9ff2 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSB01_03", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json index 5e6a6788c3..144df72be9 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json @@ -8,6 +8,12 @@ "fan_min_speed": [ "25" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_speed": [ "0.4" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json index 1253bff71f..5264f9d6de 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSB01_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab P1S 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json index b3c53e095c..6a8a891f25 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json @@ -8,6 +8,12 @@ "chamber_temperatures": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab P1S 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json index 4c9c47f1a3..db44041c73 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json @@ -8,6 +8,12 @@ "fan_min_speed": [ "25" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json index 7ae30500d9..6850e938f6 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFB01", "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_max_speed": [ "35" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json index f469aeebc6..4cfe7de309 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFB02", "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", "fan_cooling_layer_time": [ "30" ], @@ -26,9 +27,6 @@ "filament_max_volumetric_speed": [ "12" ], - "filament_retract_before_wipe": [ - "nil" - ], "filament_retraction_length": [ "1.5" ], @@ -58,5 +56,8 @@ ], "slow_down_layer_time": [ "5" + ], + "filament_scarf_seam_type": [ + "none" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json new file mode 100644 index 0000000000..442f2b6230 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json new file mode 100644 index 0000000000..70c164accf --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL A1", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..0d038bb515 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json new file mode 100644 index 0000000000..7c19ff9806 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL P1P", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..44c110b635 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json new file mode 100644 index 0000000000..a65d70b6f3 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @BBL X1C", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json new file mode 100644 index 0000000000..b280a21659 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB51", + "instantiation": "false", + "fan_max_speed": [ + "25" + ], + "filament_cost": [ + "36.99" + ], + "filament_density": [ + "1.02" + ], + "filament_flow_ratio": [ + "0.9" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_type": [ + "ASA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "108" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json index 2788ee1bdc..f278ca567b 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFN03", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ "84.99" ], diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json index 190e61093e..7df1f06e4a 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFN05", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "5" ], diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json index 24a6fa15b0..e2246b0cab 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFN08", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "5" ], diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json index 0f5dcfb745..17ef39575f 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json @@ -5,20 +5,18 @@ "from": "system", "filament_id": "GFN04", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], "fan_max_speed": [ "30" ], "fan_min_speed": [ "10" ], - "fan_cooling_layer_time": [ - "5" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_vendor": [ - "Bambu Lab" + "filament_cost": [ + "94.99" ], "filament_density": [ "1.06" @@ -26,17 +24,20 @@ "filament_flow_ratio": [ "0.96" ], - "overhang_fan_threshold": [ - "0%" + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" ], "overhang_fan_speed": [ "40" ], - "filament_type": [ - "PA-CF" - ], - "filament_cost": [ - "94.99" + "overhang_fan_threshold": [ + "0%" ], "temperature_vitrification": [ "180" diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json index 9cfc605c32..fd0c71af6c 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFT01", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "cool_plate_temp": [ "0" ], @@ -68,6 +69,12 @@ "required_nozzle_HRC": [ "40" ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], "slow_down_layer_time": [ "2" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json index 6553473d1b..97d7a7cd1a 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json @@ -8,6 +8,12 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" ] diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json index 837e060fe5..58b35890a9 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json @@ -8,9 +8,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "nil" + ], "filament_max_volumetric_speed": [ "9" ], + "filament_retraction_distances_when_cut": [ + "nil" + ], "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" ] diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json index e3d66863c0..73cc2e9633 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json @@ -8,9 +8,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "nil" + ], "filament_max_volumetric_speed": [ "12" ], + "filament_retraction_distances_when_cut": [ + "nil" + ], "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json index b187cac192..801cab4aae 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFG00", "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json index 7335bcaffe..23c674f620 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "1" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json index a4db6b85bd..6c52c255e8 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json index 2a9f8a264c..5b972849de 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json index 17106138f6..bad6f79415 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "1" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json index 2d3ea73731..df1eab0754 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json index f6d16e8d47..d3ebff57e8 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json @@ -17,9 +17,15 @@ "filament_flow_ratio": [ "0.94" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "240" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json index b0d8d37374..72f3a64f35 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "1" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json index 44193c3c43..145f98d1ff 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json index c02f8e2609..d31822c6d7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json index fc6643dfc6..d79bd3b578 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.2" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json index fd65b8f27a..4cf239e144 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSG01_05", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.3" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json index 5785e725ca..864884dad1 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.2" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json index fc1271284b..ad1111fdaa 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSG01_02", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.3" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json index 39a4bfb3f8..eafc44f3b5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.2" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json index 386ef5eab8..830dab5dea 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSG01_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "filament_retraction_length": [ "0.3" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json index 174052635c..f2569d5f39 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFG01", "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json index 47f54f981d..4ad1c37417 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "9" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json index ad7db31ffb..edf85380a3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "9" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json index 6c7b97ce7b..7852889288 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSG50_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "9" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "textured_plate_temp_initial_layer": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json index d0ea93c38c..41f1bc333e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "11.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json index 8d0e7ce354..42e23219c5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "11.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json index 95b26c2796..484a397270 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFA11", "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", "fan_min_speed": [ "30" ], @@ -26,12 +27,21 @@ "filament_vendor": [ "Bambu Lab" ], - "nozzle_temperature_range_high": [ - "260" + "filament_scarf_seam_type": [ + "none" ], "nozzle_temperature_range_low": [ "210" ], + "nozzle_temperature_range_high": [ + "260" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json index df3036b34c..b26ee48d43 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json index 4e3b6cc6dc..fbb0369812 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json index 49b44fa936..f54a464e62 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json index 1785878917..23e418b7e0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json index b975be47dc..45a5b35790 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json @@ -20,6 +20,19 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "10%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], + "compatible_printers": [], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json index ae4fbb2747..bf0d7a524f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json index d3cb1dfc85..094a7c31ac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json index b70fded863..3f59d61d76 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json index c73ef89d00..1330b7ac74 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json index b9e85c1d8c..636518b50e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json index e461af9d49..2ebe013d9a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json index 7bb8e8f94b..0d387ff78c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA15_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json index 43457c192d..bae2c44be9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA15_02", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.8 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json index d95ffa6a6d..1a8e719f09 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA15_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json index 5eae9e1e1a..8763639cdd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "1" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json index b4949148dd..4fa331e1b9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json index e162316fd3..198c2bf29a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json index 6f91b4f7fa..c4a3ca7738 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA12_08", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json index 5d0c2705a7..abcc9763a4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA12_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json index 30c339132c..1bfc1ca5cd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA12_04", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab X1E 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json index c4eaac7e47..1452831345 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json index ebb955bdf0..c53cde99c5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json @@ -14,6 +14,12 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json index 20b0a0969e..a56c168547 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA07_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json index 29592f9b4f..0b9a41dce6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSA07_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json index 55bcf1e9b0..a66550291a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json index 7b877ed611..95e6db9522 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json index eb0f819f53..477f128d1c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json index 65403831cb..8b8d54f422 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json index c0b3df5555..b223ece714 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA05", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json index 04b51f8104..25a2125b1c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA01_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json index fc0962cd0e..a4f376d9bb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA01_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.8 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json index 0987393ec6..d1f1969c26 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json index 36156e0af8..1550142d46 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json @@ -17,6 +17,18 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json index 77c81e4fb0..986613c9ae 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFA02", "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ "29.99" ], @@ -17,6 +18,9 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json index 642f939610..e9e66c97eb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFA05", "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ "29.99" ], @@ -17,12 +18,24 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], "nozzle_temperature": [ "230" ], "nozzle_temperature_initial_layer": [ "230" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json index 24168d6f13..6268e9d97e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json @@ -17,6 +17,9 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ] diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json index 48fdfde08f..7b86bec58f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json index f69ce39db1..f27abc0df2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "15" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json index d22d4de449..af10570429 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json index b976f74eb7..06b3e679e2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "15" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json index 204237570b..d7a632e1bd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA50_02", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "230" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json index 2e4aa2e93c..6ec63c6a40 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json @@ -5,9 +5,15 @@ "from": "system", "setting_id": "GFSA50_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "15" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "nozzle_temperature": [ "230" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json index 3f356ae865..ac88cc7098 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json @@ -29,15 +29,21 @@ "filament_vendor": [ "Bambu Lab" ], - "nozzle_temperature_range_high": [ - "250" - ], "nozzle_temperature_range_low": [ "210" ], + "nozzle_temperature_range_high": [ + "250" + ], "required_nozzle_HRC": [ "40" ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json index 391e986bf7..cef49fe98d 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFT02", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_max_speed": [ "30" ], @@ -23,9 +24,6 @@ "filament_vendor": [ "Bambu Lab" ], - "nozzle_temperature_range_high": [ - "350" - ], "nozzle_temperature_range_low": [ "310" ], diff --git a/resources/profiles/BBL/filament/Bambu PVA @base.json b/resources/profiles/BBL/filament/Bambu PVA @base.json index a236f83bd6..f9396292cf 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @base.json +++ b/resources/profiles/BBL/filament/Bambu PVA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS04", "instantiation": "false", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_cost": [ "79.98" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json index 7af6db4c14..3166617d72 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json @@ -5,11 +5,12 @@ "from": "system", "filament_id": "GFS03", "instantiation": "false", - "required_nozzle_HRC": [ - "3" + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" ], - "filament_vendor": [ - "Bambu Lab" + "filament_cost": [ + "34.99" ], "filament_density": [ "1.22" @@ -17,17 +18,17 @@ "filament_is_support": [ "1" ], - "nozzle_temperature_initial_layer": [ - "280" + "filament_vendor": [ + "Bambu Lab" ], "nozzle_temperature": [ "280" ], - "fan_cooling_layer_time": [ - "10" + "nozzle_temperature_initial_layer": [ + "280" ], - "filament_cost": [ - "34.99" + "required_nozzle_HRC": [ + "3" ], "slow_down_layer_time": [ "6" diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json index 75179145e6..7868741dae 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS02", "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "cool_plate_temp": [ "40" ], @@ -23,6 +24,9 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json index 52f12d83ed..db0f6ce2f1 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json @@ -11,9 +11,15 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "0.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json index cc081f215f..e0cb4210a7 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json @@ -11,6 +11,12 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json index e896919e4e..90920ebe8c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json @@ -11,9 +11,15 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "0.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json index ad2bc888ac..fcbd1bb645 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json @@ -11,6 +11,12 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json index 0352dc891a..5f71f87c3f 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json @@ -11,9 +11,15 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "0.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json index 1f47df1ec9..3e3db66e03 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json @@ -11,6 +11,12 @@ "eng_plate_temp_initial_layer": [ "65" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json index fa58a048a7..793ddf06ee 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json @@ -11,9 +11,15 @@ "eng_plate_temp_initial_layer": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "0.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json index 8672833ea7..3f210fc579 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json @@ -11,6 +11,12 @@ "eng_plate_temp_initial_layer": [ "60" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json index 4e62835862..6eae3684bf 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS05", "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_cooling_layer_time": [ "80" ], @@ -26,6 +27,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_scarf_seam_type": [ + "none" + ], "filament_vendor": [ "Bambu Lab" ], @@ -44,6 +48,9 @@ "slow_down_layer_time": [ "8" ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "textured_plate_temp": [ "60" ], diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json index 1d72fe9580..7a60603cae 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @base.json +++ b/resources/profiles/BBL/filament/Bambu Support G @base.json @@ -5,11 +5,12 @@ "from": "system", "filament_id": "GFS01", "instantiation": "false", - "required_nozzle_HRC": [ - "3" + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" ], - "filament_vendor": [ - "Bambu Lab" + "filament_cost": [ + "34.99" ], "filament_density": [ "1.22" @@ -17,17 +18,20 @@ "filament_is_support": [ "1" ], - "nozzle_temperature_initial_layer": [ - "280" + "filament_vendor": [ + "Bambu Lab" ], "nozzle_temperature": [ "280" ], - "fan_cooling_layer_time": [ - "10" + "nozzle_temperature_initial_layer": [ + "280" ], - "filament_cost": [ - "34.99" + "required_nozzle_HRC": [ + "3" + ], + "filament_scarf_seam_type": [ + "none" ], "slow_down_layer_time": [ "6" diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json index 63f7acebc8..2b40b44e08 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @base.json +++ b/resources/profiles/BBL/filament/Bambu Support W @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS00", "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "cool_plate_temp": [ "40" ], @@ -23,6 +24,9 @@ "filament_vendor": [ "Bambu Lab" ], + "filament_scarf_seam_type": [ + "none" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json index f084186496..52655bf9fb 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSS06_01", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", "Bambu Lab A1 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json index 5029095bca..9ae445e96c 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json @@ -5,6 +5,12 @@ "from": "system", "setting_id": "GFSS06_00", "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json index 506ffa39ac..3bd74d4d96 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS06", "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_max_speed": [ "30" ], @@ -29,6 +30,9 @@ "slow_down_layer_time": [ "12" ], + "filament_scarf_seam_type": [ + "none" + ], "temperature_vitrification": [ "90" ] diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json index bc1e839340..eb0555633a 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json @@ -5,19 +5,20 @@ "from": "system", "filament_id": "GFU01", "instantiation": "false", - "filament_vendor": [ - "Bambu Lab" + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" ], "filament_density": [ "1.22" ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "filament_cost": [ - "41.99" + "filament_vendor": [ + "Bambu Lab" ], "nozzle_temperature": [ "230" + ], + "nozzle_temperature_initial_layer": [ + "230" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json index 0445791bfc..6deab30b35 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFU00", "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ "41.99" ], diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json new file mode 100644 index 0000000000..52ed49cee1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL A1", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json new file mode 100644 index 0000000000..bff83af130 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL A1M", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json new file mode 100644 index 0000000000..3c8c7dad73 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL P1P", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json new file mode 100644 index 0000000000..8c7dac662f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL X1C", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json new file mode 100644 index 0000000000..09d4296506 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "GFU02", + "instantiation": "false", + "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "38.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_type": [ + "TPU-AMS" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json new file mode 100644 index 0000000000..06bca8c5f9 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PA12-CF @BBL X1C", + "inherits": "Fiberon PA12-CF @base", + "from": "system", + "setting_id": "GFSL52_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json new file mode 100644 index 0000000000..e2a5bf6475 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Fiberon PA12-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL52", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "99.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "131" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json new file mode 100644 index 0000000000..d10be7532a --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PA6-CF @BBL X1C", + "inherits": "Fiberon PA6-CF @base", + "from": "system", + "setting_id": "GFSL50_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json new file mode 100644 index 0000000000..5027f22096 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "name": "Fiberon PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL50", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "83.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "215" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json new file mode 100644 index 0000000000..c38dfd1795 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PA6-GF @BBL X1C", + "inherits": "Fiberon PA6-GF @base", + "from": "system", + "setting_id": "GFSL51_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json new file mode 100644 index 0000000000..9ab9237e7b --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Fiberon PA6-GF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL51", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "63.99" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PA-GF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "191" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json new file mode 100644 index 0000000000..d91d220575 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PA612-CF @BBL X1C", + "inherits": "Fiberon PA612-CF @base", + "from": "system", + "setting_id": "GFSL53_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json new file mode 100644 index 0000000000..031f9737be --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Fiberon PA612-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL53", + "instantiation": "false", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json new file mode 100644 index 0000000000..789dddb752 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PET-CF @BBL X1C", + "inherits": "Fiberon PET-CF @base", + "from": "system", + "setting_id": "GFSL54_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @base.json b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json new file mode 100644 index 0000000000..8a6520f1f4 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "Fiberon PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL54", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "242" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "89.99" + ], + "filament_density": [ + "1.34" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "147" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json new file mode 100644 index 0000000000..0cce20991f --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @BBL X1C", + "inherits": "Fiberon PETG-ESD @base", + "from": "system", + "setting_id": "GFSL06_00", + "instantiation": "true", + "filament_cost": [ + "29.99" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json new file mode 100644 index 0000000000..9f861a724e --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL06", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "76" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json new file mode 100644 index 0000000000..790d256550 --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Fiberon PETG-rCF @BBL X1C", + "inherits": "Fiberon PETG-rCF @base", + "from": "system", + "setting_id": "GFSL55_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json new file mode 100644 index 0000000000..aa367e2e2b --- /dev/null +++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Fiberon PETG-rCF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL55", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "12" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "39.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json index e41b289fbc..80a90af993 100644 --- a/resources/profiles/BBL/filament/Generic ABS @base.json +++ b/resources/profiles/BBL/filament/Generic ABS @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFB99", "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json index 9f80b36f12..148f69f3d0 100644 --- a/resources/profiles/BBL/filament/Generic ASA @base.json +++ b/resources/profiles/BBL/filament/Generic ASA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFB98", "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Generic EVA @base.json b/resources/profiles/BBL/filament/Generic EVA @base.json index 6a24cfdba5..7c22532034 100644 --- a/resources/profiles/BBL/filament/Generic EVA @base.json +++ b/resources/profiles/BBL/filament/Generic EVA @base.json @@ -38,9 +38,6 @@ "filament_max_volumetric_speed": [ "12" ], - "filament_type": [ - "EVA" - ], "hot_plate_temp": [ "55" ], diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json index 5ce9881f82..e229358d4c 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF.json +++ b/resources/profiles/BBL/filament/Generic PA-CF.json @@ -6,6 +6,7 @@ "filament_id": "GFN98", "setting_id": "GFSN99", "instantiation": "true", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "5" ], diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json index 6a4f7bf4e2..d7dd99831f 100644 --- a/resources/profiles/BBL/filament/Generic PA.json +++ b/resources/profiles/BBL/filament/Generic PA.json @@ -6,6 +6,7 @@ "filament_id": "GFN99", "setting_id": "GFSN98", "instantiation": "true", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json index 6c56650baf..c2a9975e37 100644 --- a/resources/profiles/BBL/filament/Generic PC @base.json +++ b/resources/profiles/BBL/filament/Generic PC @base.json @@ -5,10 +5,11 @@ "from": "system", "filament_id": "GFC99", "instantiation": "false", - "filament_max_volumetric_speed": [ - "16" - ], + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_flow_ratio": [ "0.94" + ], + "filament_max_volumetric_speed": [ + "16" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..099dfcc30a --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL A1 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json new file mode 100644 index 0000000000..d870068812 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL A1", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..0b499781ae --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL A1M 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_07", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json new file mode 100644 index 0000000000..b42117eec9 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL A1M", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_06", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..ff6131e515 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL P1P 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json new file mode 100644 index 0000000000..00587abea4 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL P1P", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..963be7b885 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL X1C 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json new file mode 100644 index 0000000000..cdb1a1196c --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL X1C", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @base.json b/resources/profiles/BBL/filament/Generic PETG HF @base.json new file mode 100644 index 0000000000..085538fe91 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Generic PETG HF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG96", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "25" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index 4e12feba51..5690901216 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -38,9 +38,6 @@ "filament_type": [ "PETG-CF" ], - "filament_vendor": [ - "Generic" - ], "hot_plate_temp": [ "70" ], @@ -65,9 +62,6 @@ "slow_down_layer_time": [ "6" ], - "temperature_vitrification": [ - "70" - ], "textured_plate_temp": [ "70" ], diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json index 904cef4dae..bf37d0917e 100644 --- a/resources/profiles/BBL/filament/Generic PLA @base.json +++ b/resources/profiles/BBL/filament/Generic PLA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFL99", "instantiation": "false", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json index 60ac1d46fa..03f0c0edcd 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json @@ -5,9 +5,16 @@ "from": "system", "filament_id": "GFL96", "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_flow_ratio": [ "0.98" ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json index 597bdd6e23..8bb1564a4c 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json @@ -23,6 +23,12 @@ "required_nozzle_HRC": [ "40" ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], "slow_down_layer_time": [ "7" ], diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json index 1e642929b2..8c6a9c9b8d 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json @@ -5,12 +5,10 @@ "from": "system", "filament_id": "GFN97", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_max_volumetric_speed": [ "6" ], - "filament_type": [ - "PPA-CF" - ], "filament_vendor": [ "Generic" ] diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json index 887d276e2d..5fc5d6e407 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json @@ -5,11 +5,15 @@ "from": "system", "filament_id": "GFT98", "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_max_speed": [ "30" ], + "filament_cost": [ + "240" + ], "filament_density": [ - "1.3" + "1.26" ], "filament_max_volumetric_speed": [ "3" @@ -17,8 +21,8 @@ "filament_type": [ "PPS-CF" ], - "nozzle_temperature_range_high": [ - "350" + "nozzle_temperature_range_low": [ + "310" ], "required_nozzle_HRC": [ "40" diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json index c29671ea3c..c394eaeb97 100644 --- a/resources/profiles/BBL/filament/Generic PVA @base.json +++ b/resources/profiles/BBL/filament/Generic PVA @base.json @@ -5,6 +5,7 @@ "from": "system", "filament_id": "GFS99", "instantiation": "false", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json new file mode 100644 index 0000000000..b73d35817b --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "name": "Generic TPU for AMS @BBL A1", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json new file mode 100644 index 0000000000..bcb504c038 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "name": "Generic TPU for AMS @BBL A1M", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json new file mode 100644 index 0000000000..fafe5667f4 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic TPU for AMS @BBL P1P", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json new file mode 100644 index 0000000000..b2e6d31197 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "name": "Generic TPU for AMS @BBL X1C", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json new file mode 100644 index 0000000000..c214ba1c27 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "name": "Generic TPU for AMS @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "GFU98", + "instantiation": "false", + "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "10.5" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_type": [ + "TPU-AMS" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json index 273e917570..f8dc0320b2 100644 --- a/resources/profiles/BBL/filament/Generic TPU.json +++ b/resources/profiles/BBL/filament/Generic TPU.json @@ -6,6 +6,7 @@ "filament_id": "GFU99", "setting_id": "GFSR99", "instantiation": "true", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_max_volumetric_speed": [ "3.2" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json index f99a91cfb0..b80e46e151 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json index 63d6bb3f21..c27df74dbb 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json @@ -8,9 +8,15 @@ "fan_max_speed": [ "20" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "16" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json index ccbfad93a5..f98e7469af 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "11.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json index a0a6388bcc..e18e63964a 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json @@ -14,9 +14,15 @@ "fan_min_speed": [ "5" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "11.5" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json index 01a5fab4a1..ad0784193b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json @@ -11,6 +11,12 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json index 469caee5cd..c67fe1d5f8 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "2" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json index fcfc07fd19..7a1fb8c212 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "22" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json index 500dacbbf3..af07fa05ba 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "18" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json index 640bb4af9a..72bb17aa43 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json @@ -11,9 +11,15 @@ "fan_min_speed": [ "50" ], + "filament_long_retractions_when_cut": [ + "1" + ], "filament_max_volumetric_speed": [ "15" ], + "filament_retraction_distances_when_cut": [ + "18" + ], "hot_plate_temp": [ "65" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json index b09cbf6aee..bfaee00f09 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json @@ -6,6 +6,7 @@ "filament_id": "GFN99", "setting_id": "GFSN98_10", "instantiation": "true", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "60" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json index 1e17c278ce..92d4992a83 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json @@ -6,6 +6,7 @@ "filament_id": "GFN98", "setting_id": "GFSN99_10", "instantiation": "true", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ "5" ], diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json index effdb2d7f3..1132340068 100644 --- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json @@ -6,6 +6,7 @@ "filament_id": "GFU99", "setting_id": "GFSR99_10", "instantiation": "true", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_max_volumetric_speed": [ "3.2" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json index 74eb871518..c01bfb694c 100644 --- a/resources/profiles/BBL/filament/fdm_filament_abs.json +++ b/resources/profiles/BBL/filament/fdm_filament_abs.json @@ -5,6 +5,12 @@ "from": "system", "instantiation": "false", "activate_air_filtration": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ "0" ], "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json index a0da767a75..ce1126adf5 100644 --- a/resources/profiles/BBL/filament/fdm_filament_asa.json +++ b/resources/profiles/BBL/filament/fdm_filament_asa.json @@ -5,6 +5,12 @@ "from": "system", "instantiation": "false", "activate_air_filtration": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ "0" ], "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/fdm_filament_bvoh.json b/resources/profiles/BBL/filament/fdm_filament_bvoh.json index 2b481e35d8..10b86375bb 100644 --- a/resources/profiles/BBL/filament/fdm_filament_bvoh.json +++ b/resources/profiles/BBL/filament/fdm_filament_bvoh.json @@ -67,6 +67,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "slow_down_min_speed": [ "20" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json index 6ec95db4a8..1e7a813c4b 100644 --- a/resources/profiles/BBL/filament/fdm_filament_common.json +++ b/resources/profiles/BBL/filament/fdm_filament_common.json @@ -114,6 +114,21 @@ "full_fan_speed_layer": [ "0" ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], "hot_plate_temp": [ "60" ], @@ -138,6 +153,12 @@ "required_nozzle_HRC": [ "3" ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], "slow_down_for_layer_cooling": [ "1" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_eva.json b/resources/profiles/BBL/filament/fdm_filament_eva.json index 1b2efe2999..5eaf47fd3c 100644 --- a/resources/profiles/BBL/filament/fdm_filament_eva.json +++ b/resources/profiles/BBL/filament/fdm_filament_eva.json @@ -6,5 +6,11 @@ "instantiation": "false", "filament_type": [ "EVA" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json index 4d1b09d37a..c7c0ab7d2f 100644 --- a/resources/profiles/BBL/filament/fdm_filament_hips.json +++ b/resources/profiles/BBL/filament/fdm_filament_hips.json @@ -16,6 +16,12 @@ "textured_plate_temp": [ "90" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp_initial_layer": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json index 1cd78ec77f..5f0a1ca7fc 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pa.json +++ b/resources/profiles/BBL/filament/fdm_filament_pa.json @@ -7,6 +7,12 @@ "activate_air_filtration": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json index 03bc9e5663..313655fc8a 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pc.json +++ b/resources/profiles/BBL/filament/fdm_filament_pc.json @@ -4,6 +4,12 @@ "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pctg.json b/resources/profiles/BBL/filament/fdm_filament_pctg.json index 1b38376293..5c93c7d0d4 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pctg.json +++ b/resources/profiles/BBL/filament/fdm_filament_pctg.json @@ -1,64 +1,70 @@ { - "type": "filament", - "name": "fdm_filament_pctg", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.27" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "filament_type": [ - "PCTG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "255" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] + "type": "filament", + "name": "fdm_filament_pctg", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_type": [ + "PCTG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pe.json b/resources/profiles/BBL/filament/fdm_filament_pe.json index 8ce20df68a..0808a35524 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pe.json +++ b/resources/profiles/BBL/filament/fdm_filament_pe.json @@ -64,6 +64,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json index 4a5f6085ca..ef13f4f894 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pet.json +++ b/resources/profiles/BBL/filament/fdm_filament_pet.json @@ -49,6 +49,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], "temperature_vitrification": [ "70" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pha.json b/resources/profiles/BBL/filament/fdm_filament_pha.json index 82519f1b2e..19d143f5a7 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pha.json +++ b/resources/profiles/BBL/filament/fdm_filament_pha.json @@ -64,6 +64,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json index a93b981098..9321b9ecad 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pla.json +++ b/resources/profiles/BBL/filament/fdm_filament_pla.json @@ -4,62 +4,56 @@ "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "fan_cooling_layer_time": [ - "100" + "additional_cooling_fan_speed": [ + "70" ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_density": [ - "1.24" - ], - "filament_cost": [ - "20" + "close_fan_the_first_x_layers": [ + "1" ], "cool_plate_temp": [ "35" ], + "cool_plate_temp_initial_layer": [ + "35" + ], "eng_plate_temp": [ "0" ], - "hot_plate_temp": [ - "55" - ], - "textured_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "reduce_fan_stop_start_freq": [ - "1" + "fan_cooling_layer_time": [ + "100" ], "fan_min_speed": [ "100" ], - "overhang_fan_threshold": [ - "50%" + "filament_cost": [ + "20" ], - "close_fan_the_first_x_layers": [ - "1" + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_gap": [ + "15%" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" ], "nozzle_temperature": [ "220" ], - "temperature_vitrification": [ - "45" + "nozzle_temperature_initial_layer": [ + "220" ], "nozzle_temperature_range_low": [ "190" @@ -67,14 +61,26 @@ "nozzle_temperature_range_high": [ "240" ], - "slow_down_min_speed": [ - "20" + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" ], "slow_down_layer_time": [ "4" ], - "additional_cooling_fan_speed": [ - "70" + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" diff --git a/resources/profiles/BBL/filament/fdm_filament_pp.json b/resources/profiles/BBL/filament/fdm_filament_pp.json index 83a4278250..66927c186a 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pp.json +++ b/resources/profiles/BBL/filament/fdm_filament_pp.json @@ -64,6 +64,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_ppa.json b/resources/profiles/BBL/filament/fdm_filament_ppa.json index 23b082b05c..c45e713f34 100644 --- a/resources/profiles/BBL/filament/fdm_filament_ppa.json +++ b/resources/profiles/BBL/filament/fdm_filament_ppa.json @@ -7,6 +7,12 @@ "activate_air_filtration": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pps.json b/resources/profiles/BBL/filament/fdm_filament_pps.json index a3f104b6f3..b8d366193e 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pps.json +++ b/resources/profiles/BBL/filament/fdm_filament_pps.json @@ -7,6 +7,12 @@ "chamber_temperatures": [ "60" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json index 7d0bdf1b4a..2b00903a60 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pva.json +++ b/resources/profiles/BBL/filament/fdm_filament_pva.json @@ -70,6 +70,12 @@ "reduce_fan_stop_start_freq": [ "1" ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json index 8ec0a4fec3..13a305e762 100644 --- a/resources/profiles/BBL/filament/fdm_filament_tpu.json +++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json @@ -10,6 +10,12 @@ "close_fan_the_first_x_layers": [ "1" ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], "cool_plate_temp": [ "30" ], diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json index b198ff4dda..a897bd8aaa 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json @@ -16,10 +16,11 @@ "Bambu PLA Basic @BBL A1" ], "default_print_profile": "0.20mm Standard @BBL A1", + "enable_long_retraction_when_cut": "2", "extruder_clearance_height_to_lid": "256", "extruder_clearance_height_to_rod": "25", "extruder_clearance_max_radius": "73", - "extruder_clearance_radius": "73", + "extruder_clearance_dist_to_rod": "56.5", "head_wrap_detect_zone": [ "226x224", "256x224", diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json index 2608b6b731..5319a77f85 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -17,10 +17,11 @@ "Bambu PLA Basic @BBL A1M" ], "default_print_profile": "0.20mm Standard @BBL A1M", + "enable_long_retraction_when_cut": "2", "extruder_clearance_height_to_lid": "180", "extruder_clearance_height_to_rod": "25", "extruder_clearance_max_radius": "73", - "extruder_clearance_radius": "73", + "extruder_clearance_dist_to_rod": "56.5", "head_wrap_detect_zone": [ "156x152", "180x152", diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index c92d63d0b6..b947c06289 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -37,7 +37,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20241115 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", + "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index 8b9d063dbc..5cee189af5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -29,7 +29,6 @@ "nozzle_height": "4.2", "nozzle_type": "stainless_steel", "scan_first_layer": "0", - "support_air_filtration": "1", "upward_compatible_machine": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index 9c1127eec4..2fa72d13f9 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -30,5 +30,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index a70b7c8f11..90b3f20147 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -30,7 +30,6 @@ "nozzle_height": "4.2", "nozzle_type": "stainless_steel", "scan_first_layer": "1", - "support_air_filtration": "1", "upward_compatible_machine": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", @@ -38,7 +37,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n", + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index ec5a3b1ea9..5d5d0ea81a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index fd1aa6bf82..e9002fed0c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -34,5 +34,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index a0b54160a5..fc3fbaced3 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -31,5 +31,5 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 6577b3950a..70baeeacec 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -28,7 +28,6 @@ "machine_unload_filament_time": "28", "nozzle_height": "4.2", "scan_first_layer": "1", - "support_air_filtration": "1", "upward_compatible_machine": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", @@ -36,7 +35,7 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4", + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 2dffc6f94c..02326f033f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -33,5 +33,5 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle" ], - "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index 4e22e6bc78..2ccd165cb6 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -33,5 +33,5 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle" ], - "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json index 3050ab385a..4277bdf3dc 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json @@ -37,7 +37,7 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n\n", + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240919 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n", "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json index 59c372c15f..e0968ac56f 100644 --- a/resources/profiles/BBL/machine/fdm_machine_common.json +++ b/resources/profiles/BBL/machine/fdm_machine_common.json @@ -79,9 +79,10 @@ "0.08" ], "printable_height": "250", - "extruder_clearance_radius": "65", "extruder_clearance_height_to_rod": "34", "extruder_clearance_height_to_lid": "140", + "extruder_clearance_max_radius": "65", + "extruder_clearance_dist_to_rod": "33", "printer_settings_id": "", "retraction_minimum_travel": [ "2" @@ -123,7 +124,5 @@ "upward_compatible_machine": [], "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end", - "change_filament_gcode": "", - "purge_in_prime_tower": "0", - "enable_filament_ramming": "0" + "change_filament_gcode": "" } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json index 227fb04c57..37a2a12777 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json @@ -8,7 +8,6 @@ "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1P 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json index 0857a48e0e..364bcaa1ee 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json @@ -12,6 +12,7 @@ "bridge_flow": "1", "line_width": "0.22", "outer_wall_line_width": "0.22", + "ironing_inset": "0.11", "initial_layer_line_width": "0.25", "sparse_infill_line_width": "0.22", "inner_wall_line_width": "0.22", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json index 80670ce3b6..52a1749075 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json @@ -12,6 +12,7 @@ "bridge_flow": "1", "line_width": "0.22", "outer_wall_line_width": "0.22", + "ironing_inset": "0.11", "initial_layer_line_width": "0.25", "sparse_infill_line_width": "0.22", "inner_wall_line_width": "0.22", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json index 9d54d14c18..020a3f9cc8 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json @@ -12,6 +12,7 @@ "bridge_flow": "1", "line_width": "0.22", "outer_wall_line_width": "0.22", + "ironing_inset": "0.11", "initial_layer_line_width": "0.25", "sparse_infill_line_width": "0.22", "inner_wall_line_width": "0.22", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json index 9d35f2501e..56aedfd03e 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json @@ -12,6 +12,7 @@ "bridge_flow": "1", "line_width": "0.22", "outer_wall_line_width": "0.22", + "ironing_inset": "0.11", "initial_layer_line_width": "0.25", "sparse_infill_line_width": "0.22", "inner_wall_line_width": "0.22", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json index 573669d4a5..7c10c6c673 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json @@ -12,6 +12,7 @@ "bridge_flow": "1", "line_width": "0.22", "outer_wall_line_width": "0.22", + "ironing_inset": "0.11", "initial_layer_line_width": "0.25", "sparse_infill_line_width": "0.22", "inner_wall_line_width": "0.22", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json index 0220f43a0d..31c88af561 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", + "ironing_inset": "0.31", "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "inner_wall_line_width": "0.62", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json index 514e31759a..ca62151342 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", + "ironing_inset": "0.31", "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "inner_wall_line_width": "0.62", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json index 5fedaf53d6..88e1f68075 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", + "ironing_inset": "0.41", "initial_layer_line_width": "0.82", "sparse_infill_line_width": "0.82", "inner_wall_line_width": "0.82", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json index 26b39f3736..08476dbb78 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", + "ironing_inset": "0.31", "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "inner_wall_line_width": "0.62", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json index 0f5913b2eb..c1622d28f5 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", + "ironing_inset": "0.41", "initial_layer_line_width": "0.82", "sparse_infill_line_width": "0.82", "inner_wall_line_width": "0.82", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json index f94531fbe3..f9c917dfc5 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", + "ironing_inset": "0.31", "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "inner_wall_line_width": "0.62", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json index 3e0d8b147e..be6eb5944a 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", + "ironing_inset": "0.41", "initial_layer_line_width": "0.82", "sparse_infill_line_width": "0.82", "inner_wall_line_width": "0.82", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json index 07120eef78..d879b17b8b 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.62", "outer_wall_line_width": "0.62", + "ironing_inset": "0.31", "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "inner_wall_line_width": "0.62", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json index 3a77fbf006..e9955abd55 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", + "ironing_inset": "0.41", "initial_layer_line_width": "0.82", "sparse_infill_line_width": "0.82", "inner_wall_line_width": "0.82", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json index 3970ac5ac7..99fb6bf6e7 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json @@ -9,6 +9,7 @@ "bridge_flow": "1", "line_width": "0.82", "outer_wall_line_width": "0.82", + "ironing_inset": "0.41", "initial_layer_line_width": "0.82", "sparse_infill_line_width": "0.82", "inner_wall_line_width": "0.82", diff --git a/resources/profiles/BBL/process/fdm_process_bbl_common.json b/resources/profiles/BBL/process/fdm_process_bbl_common.json index fc377a0b86..d77980a29d 100644 --- a/resources/profiles/BBL/process/fdm_process_bbl_common.json +++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json @@ -59,6 +59,7 @@ "tree_support_branch_diameter": "2", "tree_support_branch_angle": "45", "tree_support_wall_count": "0", + "max_bridge_length": "0", "top_surface_pattern": "monotonicline", "top_surface_acceleration": "2000", "top_surface_speed": "200", diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index c68411dbbe..1723f8835e 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -13,6 +13,7 @@ "bridge_no_support": "0", "elefant_foot_compensation": "0.1", "outer_wall_line_width": "0.42", + "ironing_inset": "0.21", "outer_wall_speed": "120", "line_width": "0.45", "infill_direction": "45", @@ -69,5 +70,6 @@ "xy_contour_compensation": "0", "compatible_printers": [], "smooth_coefficient": "80", - "overhang_totally_speed": "24" + "overhang_totally_speed": "19", + "scarf_angle_threshold": "155" } \ No newline at end of file