3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-07 06:57:36 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

ENH: modify tooltip in chamber temp

Browse source 
Also remove bed_temperature_difference in config

jira: STUDIO-4197
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id992bf0a6b5496038d513a6243b54c5232113515
(cherry picked from commit bda89606a36f3629ad1e1721e005242911635cbd)
This commit is contained in:
xun.zhang 2023-08-30 14:30:20 +08:00 • committed by Lane.Wei
parent e1cc765f6e
commit 50051b82d1
6 changed files with 6 additions and 52 deletions
Download patch file Download diff file Expand all files Collapse all files

19
src/libslic3r/PrintConfig.cpp
View file

@ -3174,10 +3174,10 @@ void PrintConfigDef::init_fff_params()
def = this->add("chamber_temperatures", coInts);
def->label = L("Chamber temperature");
def->tooltip = L("By opening chamber_temperature compensation, the heating components will operate to elevate the chamber temperature."
"This can help suppress or reduce warping for high-temperature materials and potentially lead to higher interlayer bonding strength."
"While for PLA, PETG, TPU, PVA and other low temperature materials, the actual chamber temperature should not be high to avoid cloggings,"
"so extra chamber temperature compensation is not needed, and 0 is highly recommended");
def->tooltip = L("Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on."
"At the same time, the air filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and other low temperature materials,"
"the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
);
def->sidetext = L("°C");
def->full_label = L("Chamber temperature");
def->min = 0;
@ -3209,15 +3209,6 @@ void PrintConfigDef::init_fff_params()
def->max = max_temp;
def->set_default_value(new ConfigOptionInts { 240 });
def = this->add("bed_temperature_difference", coInts);
def->label = L("Bed temperature difference");
def->tooltip = L("Do not recommend bed temperature of other layer to be lower than initial layer for more than this threshold. "
"Too low bed temperature of other layer may cause the model broken free from build plate");
def->sidetext = L("°C");
def->min = 0;
def->max = 30;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInts { 10 });
def = this->add("detect_thin_wall", coBool);
def->label = L("Detect thin wall");
@ -4365,7 +4356,7 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
"remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
"support_transition_line_width", "support_transition_speed", "bed_temperature", "bed_temperature_initial_layer",
"can_switch_nozzle_type", "can_add_auxiliary_fan", "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height",
"z_hop_type","nozzle_hrc","chamber_temperature","only_one_wall_top"
"z_hop_type","nozzle_hrc","chamber_temperature","only_one_wall_top","bed_temperature_difference"
};
if (ignore.find(opt_key) != ignore.end()) {