diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml
index b8477e12c6..c21e7778ca 100644
--- a/.github/ISSUE_TEMPLATE/bug_report.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report.yml
@@ -8,7 +8,7 @@ body:
**Thank you for using Orca Slicer and wanting to report a bug.**
Please note that this is not the place to make feature requests or ask for help.
- For this, please use the [Feature request](https://github.com/SoftFever/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=feature_request.yml) issue type or you can discuss your idea on our [Discord server](https://discord.gg/P4VE9UY9gJ) with others.
+ For this, please use the [Feature request](https://github.com/OrcaSlicer/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=feature_request.yml) issue type or you can discuss your idea on our [Discord server](https://discord.gg/P4VE9UY9gJ) with others.
Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment.
- type: checkboxes
diff --git a/.github/ISSUE_TEMPLATE/config.yml b/.github/ISSUE_TEMPLATE/config.yml
index 3639de151a..066570738f 100644
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@@ -4,5 +4,5 @@ contact_links:
url: https://discord.gg/P4VE9UY9gJ
about: Please ask and answer support "how do I?"questions here.
- name: Discussion Forum
- url: https://github.com/SoftFever/OrcaSlicer/discussions
+ url: https://github.com/OrcaSlicer/OrcaSlicer/discussions
about: Please raise ideas and feature suggestions here.
diff --git a/.github/ISSUE_TEMPLATE/feature_request.yml b/.github/ISSUE_TEMPLATE/feature_request.yml
index 4ae8a24faa..8494386c5c 100644
--- a/.github/ISSUE_TEMPLATE/feature_request.yml
+++ b/.github/ISSUE_TEMPLATE/feature_request.yml
@@ -8,7 +8,7 @@ body:
Thanks for taking the time to fill out this feature request!
If your idea is still at the formulation stage, or you're not sure it would
- be useful to many users, you can raise it as a discussion topic under [Ideas](https://github.com/SoftFever/OrcaSlicer/discussions/categories/ideas)
+ be useful to many users, you can raise it as a discussion topic under [Ideas](https://github.com/OrcaSlicer/OrcaSlicer/discussions/categories/ideas)
or you can raise it on the [Discord server](https://discord.gg/P4VE9UY9gJ).
- type: checkboxes
attributes:
diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml
index 1a46740b8f..8eeae2fdb9 100644
--- a/.github/workflows/build_all.yml
+++ b/.github/workflows/build_all.yml
@@ -51,7 +51,7 @@ jobs:
strategy:
fail-fast: false
# Don't run scheduled builds on forks:
- if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'SoftFever/OrcaSlicer') }}
+ if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
uses: ./.github/workflows/build_check_cache.yml
with:
os: ubuntu-24.04
@@ -67,7 +67,7 @@ jobs:
- os: macos-14
arch: arm64
# Don't run scheduled builds on forks:
- if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'SoftFever/OrcaSlicer') }}
+ if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
uses: ./.github/workflows/build_check_cache.yml
with:
os: ${{ matrix.os }}
@@ -131,7 +131,7 @@ jobs:
- arch: aarch64
runner: ubuntu-24.04-arm
# Don't run scheduled builds on forks:
- if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'SoftFever/OrcaSlicer') }}
+ if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
runs-on: ${{ matrix.variant.runner }}
env:
date:
@@ -170,10 +170,10 @@ jobs:
name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
- name: Deploy Flatpak to nightly release
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index 2bb07ee2cf..1247937b08 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -108,7 +108,7 @@ jobs:
# Thanks to RaySajuuk, it's working now
- name: Sign app and notary
- if: github.repository == 'SoftFever/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && inputs.os == 'macos-14'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && inputs.os == 'macos-14'
working-directory: ${{ github.workspace }}
env:
BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}
@@ -195,10 +195,10 @@ jobs:
if-no-files-found: ignore
- name: Deploy Mac release
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
asset_name: OrcaSlicer_Mac_universal_nightly.dmg
@@ -206,10 +206,10 @@ jobs:
max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
- name: Deploy Mac OrcaSlicer_profile_validator DMG release
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
asset_name: OrcaSlicer_profile_validator_Mac_universal_nightly.dmg
@@ -282,10 +282,10 @@ jobs:
path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
- name: Deploy Windows release portable
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
asset_name: OrcaSlicer_Windows_nightly_portable.zip
@@ -293,10 +293,10 @@ jobs:
max_releases: 1
- name: Deploy Windows release installer
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
asset_name: OrcaSlicer_Windows_Installer_nightly.exe
@@ -304,10 +304,10 @@ jobs:
max_releases: 1
- name: Deploy Windows OrcaSlicer_profile_validator release
- if: github.repository == 'SoftFever/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+ if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
asset_name: OrcaSlicer_profile_validator_Windows_nightly.exe
@@ -373,19 +373,19 @@ jobs:
path: './build/src/Release/OrcaSlicer_profile_validator'
- name: Deploy Ubuntu release
- if: ${{ github.repository == 'SoftFever/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
+ if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
env:
ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_nightly.AppImage
asset_content_type: application/octet-stream
max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
- name: Deploy Ubuntu release
- if: ${{ github.repository == 'SoftFever/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
+ if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
uses: rickstaa/action-create-tag@v1
with:
tag: "nightly-builds"
@@ -394,12 +394,12 @@ jobs:
message: "nightly-builds"
- name: Deploy Ubuntu OrcaSlicer_profile_validator release
- if: ${{ github.repository == 'SoftFever/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
+ if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
env:
ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ./build/src/Release/OrcaSlicer_profile_validator
asset_name: OrcaSlicer_profile_validator_Linux${{ env.ubuntu-ver-str }}_nightly
@@ -407,10 +407,10 @@ jobs:
max_releases: 1
- name: Deploy orca_custom_preset_tests
- if: ${{ github.repository == 'SoftFever/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
+ if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
uses: WebFreak001/deploy-nightly@v3.2.0
with:
- upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+ upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
release_id: 137995723
asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
asset_name: orca_custom_preset_tests.zip
diff --git a/.github/workflows/check_profiles.yml b/.github/workflows/check_profiles.yml
index f1d75d818f..512c08c7c8 100644
--- a/.github/workflows/check_profiles.yml
+++ b/.github/workflows/check_profiles.yml
@@ -42,7 +42,7 @@ jobs:
- name: validate custom presets
working-directory: ${{ github.workspace }}
run: |
- curl -LJO https://github.com/SoftFever/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
+ curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
unzip ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2
diff --git a/.github/workflows/validate-documentation.yml b/.github/workflows/validate-documentation.yml
index b2ce951135..d4c4cfc9c0 100644
--- a/.github/workflows/validate-documentation.yml
+++ b/.github/workflows/validate-documentation.yml
@@ -258,7 +258,7 @@ jobs:
# Validate images
Write-Host "Validating images..." -ForegroundColor Blue
- $expectedUrlPattern = '^https://github\.com/SoftFever/OrcaSlicer/blob/main/([^?]+)\?raw=true$'
+ $expectedUrlPattern = '^https://github\.com/OrcaSlicer/OrcaSlicer/blob/main/([^?]+)\?raw=true$'
foreach ($file in $mdFiles) {
$lines = Get-Content $file.FullName -Encoding UTF8
@@ -300,9 +300,9 @@ jobs:
}
} else {
$urlIssues = @()
- if (-not $url.StartsWith('https://github.com/SoftFever/OrcaSlicer/blob/main/')) { $urlIssues += "URL must start with expected prefix" }
+ if (-not $url.StartsWith('https://github.com/OrcaSlicer/OrcaSlicer/blob/main/')) { $urlIssues += "URL must start with expected prefix" }
if (-not $url.EndsWith('?raw=true')) { $urlIssues += "URL must end with '?raw=true'" }
- if ($url -match '^https?://(?!github\.com/SoftFever/OrcaSlicer)') { $urlIssues += "External URLs not allowed" }
+ if ($url -match '^https?://(?!github\.com/OrcaSlicer/OrcaSlicer)') { $urlIssues += "External URLs not allowed" }
$issueText = "[$imageType] URL format issues: " + ($urlIssues -join '; ')
$brokenReferences += Add-BrokenReference $relPath ($lineNumber + 1) $imageMatch $issueText "Image"
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 247c295899..eb4d58c513 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -930,7 +930,7 @@ set (CPACK_PACKAGE_VERSION_MINOR "${ORCA_VERSION_MINOR}")
set (CPACK_PACKAGE_VERSION_PATCH "${ORCA_VERSION_PATCH}")
set (CPACK_PACKAGE_FILE_NAME "OrcaSlicer_Windows_Installer_V${SoftFever_VERSION}")
set (CPACK_PACKAGE_DESCRIPTION_SUMMARY "Orca Slicer is an open source slicer for FDM printers")
-set (CPACK_PACKAGE_HOMEPAGE_URL "https://github.com/SoftFever/OrcaSlicer")
+set (CPACK_PACKAGE_HOMEPAGE_URL "https://github.com/OrcaSlicer/OrcaSlicer")
set (CPACK_PACKAGE_INSTALL_DIRECTORY ${CPACK_PACKAGE_NAME})
set (CPACK_PACKAGE_ICON "${CMAKE_SOURCE_DIR}/resources/images\\\\OrcaSlicer.ico")
set (CPACK_NSIS_MUI_ICON "${CPACK_PACKAGE_ICON}")
diff --git a/README.md b/README.md
index 2b9f804853..30cf379a5c 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@
-[](https://github.com/SoftFever/OrcaSlicer/stargazers) [](https://github.com/SoftFever/OrcaSlicer/actions/workflows/build_all.yml)
+[](https://github.com/OrcaSlicer/OrcaSlicer/stargazers) [](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml)
OrcaSlicer: an open source Next-Gen Slicing Software for Precision 3D Prints.
Optimize your prints with ultra-fast slicing, intelligent support generation, and seamless printer compatibilityβengineered for perfection.
@@ -18,7 +18,7 @@ Optimize your prints with ultra-fast slicing, intelligent support generation, an
OrcaSlicer.com
#### Github Repository:
-
+
#### Follow us:
@@ -44,27 +44,27 @@ If you come across any of these in search results, please report them as
# Main features
-- **[Advanced Calibration Tools](https://github.com/SoftFever/OrcaSlicer/wiki/Calibration)**
+- **[Advanced Calibration Tools](https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration)**
Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
-- **[Precise Wall](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_seam)**
+- **[Precise Wall](https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_seam)**
Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
-- **[Sandwich Mode](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#polyholes) Support**
- Use varied infill [patterns](https://github.com/SoftFever/OrcaSlicer/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
-- **[Overhang](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_overhangs) and [Support Optimization](https://github.com/SoftFever/OrcaSlicer/wiki#support-settings)**
+- **[Sandwich Mode](https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_precision#polyholes) Support**
+ Use varied infill [patterns](https://github.com/OrcaSlicer/OrcaSlicer/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
+- **[Overhang](https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_overhangs) and [Support Optimization](https://github.com/OrcaSlicer/OrcaSlicer/wiki#support-settings)**
Modify geometry for printable overhangs with precise support placement.
-- **[Granular Controls](https://github.com/SoftFever/OrcaSlicer/wiki#process-settings) and Customization**
+- **[Granular Controls](https://github.com/OrcaSlicer/OrcaSlicer/wiki#process-settings) and Customization**
Fine-tune print speed, layer height, pressure, and temperature with precision.
- **Network Printer Support**
Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.
-- **[Mouse Ear Brims](https://github.com/SoftFever/OrcaSlicer/wiki/others_settings_brim) & Adaptive Bed Mesh**
+- **[Mouse Ear Brims](https://github.com/OrcaSlicer/OrcaSlicer/wiki/others_settings_brim) & Adaptive Bed Mesh**
Automatic brims and adaptive mesh calibration ensure consistent adhesion.
- **User-Friendly Interface**
Intuitive drag-and-drop design with pre-made profiles for popular printers.
-- **[Open-Source](https://github.com/SoftFever/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**
+- **[Open-Source](https://github.com/OrcaSlicer/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**
Regular updates fueled by continuous community contributions.
- **Wide Printer Compatibility**
Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- Additional features can be found in the [change notes](https://github.com/SoftFever/OrcaSlicer/releases/).
+- Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).
# Wiki
@@ -72,36 +72,36 @@ The wiki below aims to provide a detailed explanation of the slicer settings, in
Please note that the wiki is a work in progress. We appreciate your patience as we continue to develop and improve it!
-- **[Access the wiki here](https://github.com/SoftFever/OrcaSlicer/wiki)**
-- **[Contribute to the wiki](https://github.com/SoftFever/OrcaSlicer/wiki/How-to-wiki)**
+- **[Access the wiki here](https://github.com/OrcaSlicer/OrcaSlicer/wiki)**
+- **[Contribute to the wiki](https://github.com/OrcaSlicer/OrcaSlicer/wiki/How-to-wiki)**
# Download
## Stable Release
-π₯ **[Download the Latest Stable Release](https://github.com/SoftFever/OrcaSlicer/releases/latest)**
+π₯ **[Download the Latest Stable Release](https://github.com/OrcaSlicer/OrcaSlicer/releases/latest)**
Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
## Nightly Builds
-π **[Download the Latest Nightly Build](https://github.com/SoftFever/OrcaSlicer/releases/tag/nightly-builds)**
+π **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**
Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
# How to install
## Windows
-Download the **Windows Installer exe** for your preferred version from the [releases page](https://github.com/SoftFever/OrcaSlicer/releases).
+Download the **Windows Installer exe** for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
- *For convenience there is also a portable build available.*
Troubleshooting
- *If you have troubles to run the build, you might need to install following runtimes:*
- - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/SoftFever/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
+ - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
- [Details of this runtime](https://aka.ms/webview2)
- [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
- - [vcredist2019_x64](https://github.com/SoftFever/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
+ - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
- [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
- This file may already be available on your computer if you've installed visual studio. Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
@@ -146,7 +146,7 @@ winget install --id=SoftFever.OrcaSlicer -e
# How to Compile
-All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://github.com/SoftFever/OrcaSlicer/wiki/How-to-build) page.
+All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://github.com/OrcaSlicer/OrcaSlicer/wiki/How-to-build) page.
Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
diff --git a/cmake/modules/MacOSXBundleInfo.plist.in b/cmake/modules/MacOSXBundleInfo.plist.in
index 2f010c8a82..15979c4822 100644
--- a/cmake/modules/MacOSXBundleInfo.plist.in
+++ b/cmake/modules/MacOSXBundleInfo.plist.in
@@ -133,7 +133,7 @@
${MACOSX_BUNDLE_COPYRIGHT}
NSAppTransportSecurity
-
+
NSAllowsArbitraryLoads
NSAllowsArbitraryLoadsInWebContent
diff --git a/doc/Home.md b/doc/Home.md
index 406420b2ea..89e8e94ad1 100644
--- a/doc/Home.md
+++ b/doc/Home.md
@@ -17,16 +17,16 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki
> [!WARNING]
> This wiki is community-maintained.
-> Some pages may be **outdated** while others may be **newer** and present only in [nightly build](https://github.com/SoftFever/OrcaSlicer/releases/tag/nightly-builds) or [latest release](https://github.com/SoftFever/OrcaSlicer/releases).
+> Some pages may be **outdated** while others may be **newer** and present only in [nightly build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds) or [latest release](https://github.com/OrcaSlicer/OrcaSlicer/releases).
> [!NOTE]
> Please consider contributing to the wiki following the [How to contribute to the wiki](How-to-wiki) guide.
## Printer Settings
-
+
- Settings related to the 3D printer hardware and its configuration.
+ Settings related to the 3D printer hardware and its configuration.
- [Air filtration/Exhaust fan handling](air-filtration)
- [Auxiliary fan handling](Auxiliary-fan)
@@ -36,104 +36,104 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki
## Material Settings
-
+
- Settings related to the 3D printing material.
+ Settings related to the 3D printing material.
- [Single Extruder Multimaterial](semm)
- [Pellet Printers (pellet flow coefficient)](pellet-flow-coefficient)
## Process Settings
-
+
- Settings related to the 3D printing process.
+ Settings related to the 3D printing process.
### Quality Settings
- Settings related to print quality and aesthetics.
-
+ Settings related to print quality and aesthetics.
+
--  [Layer Height Settings](quality_settings_layer_height)
--  [Line Width Settings](quality_settings_line_width)
--  [Seam Settings](quality_settings_seam)
--  [Precision](quality_settings_precision)
--  [Ironing](quality_settings_ironing)
--  [Wall generator](quality_settings_wall_generator)
--  [Walls and surfaces](quality_settings_wall_and_surfaces)
--  [Bridging](quality_settings_bridging)
--  [Overhangs](quality_settings_overhangs)
+-  [Layer Height Settings](quality_settings_layer_height)
+-  [Line Width Settings](quality_settings_line_width)
+-  [Seam Settings](quality_settings_seam)
+-  [Precision](quality_settings_precision)
+-  [Ironing](quality_settings_ironing)
+-  [Wall generator](quality_settings_wall_generator)
+-  [Walls and surfaces](quality_settings_wall_and_surfaces)
+-  [Bridging](quality_settings_bridging)
+-  [Overhangs](quality_settings_overhangs)
### Strength Settings
- Settings related to print strength and durability.
-
+ Settings related to print strength and durability.
+
--  [Walls](strength_settings_walls)
--  [Top and Bottom Shells](strength_settings_top_bottom_shells)
--  [Infill](strength_settings_infill)
- -  [Fill Patterns](strength_settings_patterns)
- -  [Template Metalanguage for infill rotation](strength_settings_infill_rotation_template_metalanguage)
--  [Advanced](strength_settings_advanced)
+-  [Walls](strength_settings_walls)
+-  [Top and Bottom Shells](strength_settings_top_bottom_shells)
+-  [Infill](strength_settings_infill)
+ -  [Fill Patterns](strength_settings_patterns)
+ -  [Template Metalanguage for infill rotation](strength_settings_infill_rotation_template_metalanguage)
+-  [Advanced](strength_settings_advanced)
### Speed Settings
- Settings related to print speed and movement.
-
+ Settings related to print speed and movement.
+
--  [Initial Layer Speed](speed_settings_initial_layer_speed)
--  [Other Layers Speed](speed_settings_other_layers_speed)
--  [Overhang Speed](speed_settings_overhang_speed)
--  [Travel Speed](speed_settings_travel)
--  [Acceleration](speed_settings_acceleration)
--  [Jerk (XY)](speed_settings_jerk_xy)
--  [Advanced / Extrusion rate smoothing](speed_settings_advanced)
+-  [Initial Layer Speed](speed_settings_initial_layer_speed)
+-  [Other Layers Speed](speed_settings_other_layers_speed)
+-  [Overhang Speed](speed_settings_overhang_speed)
+-  [Travel Speed](speed_settings_travel)
+-  [Acceleration](speed_settings_acceleration)
+-  [Jerk (XY)](speed_settings_jerk_xy)
+-  [Advanced / Extrusion rate smoothing](speed_settings_advanced)
### Support Settings
- Settings related to support structures and their properties.
-
+ Settings related to support structures and their properties.
+
--  [Support](support_settings_support)
--  [Raft](support_settings_raft)
--  [Support Filament](support_settings_filament)
--  [Support Ironing](support_settings_ironing)
--  [Advanced](support_settings_advanced)
--  [Tree Supports](support_settings_tree)
+-  [Support](support_settings_support)
+-  [Raft](support_settings_raft)
+-  [Support Filament](support_settings_filament)
+-  [Support Ironing](support_settings_ironing)
+-  [Advanced](support_settings_advanced)
+-  [Tree Supports](support_settings_tree)
### Multimaterial Settings
- Settings related to multimaterial printing.
-
+ Settings related to multimaterial printing.
+
--  [Prime Tower](multimaterial_settings_prime_tower)
--  [Filament for Features](multimaterial_settings_filament_for_features)
--  [Ooze Prevention](multimaterial_settings_ooze_prevention)
--  [Flush Options](multimaterial_settings_flush_options)
--  [Advanced](multimaterial_settings_advanced)
+-  [Prime Tower](multimaterial_settings_prime_tower)
+-  [Filament for Features](multimaterial_settings_filament_for_features)
+-  [Ooze Prevention](multimaterial_settings_ooze_prevention)
+-  [Flush Options](multimaterial_settings_flush_options)
+-  [Advanced](multimaterial_settings_advanced)
### Others Settings
- Settings related to various other print settings.
-
+ Settings related to various other print settings.
+
--  [Skirt](others_settings_skirt)
--  [Brim](others_settings_brim)
--  [Special Mode](others_settings_special_mode)
--  [Fuzzy Skin](others_settings_fuzzy_skin)
--  [G-Code Output](others_settings_g_code_output)
--  [Post Processing Scripts](others_settings_post_processing_scripts)
--  [Notes](others_settings_notes)
+-  [Skirt](others_settings_skirt)
+-  [Brim](others_settings_brim)
+-  [Special Mode](others_settings_special_mode)
+-  [Fuzzy Skin](others_settings_fuzzy_skin)
+-  [G-Code Output](others_settings_g_code_output)
+-  [Post Processing Scripts](others_settings_post_processing_scripts)
+-  [Notes](others_settings_notes)
## Prepare
- First steps to prepare your model/s for printing.
+ First steps to prepare your model/s for printing.
- [STL Transformation](stl-transformation)
## Calibrations
- The [Calibration Guide](Calibration) outlines Orcaβs key calibration tests and their suggested order of execution.
+ The [Calibration Guide](Calibration) outlines Orcaβs key calibration tests and their suggested order of execution.
- [Temperature](temp-calib)
- [Flow Rate](flow-rate-calib)
@@ -149,7 +149,7 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki
## Developer Section
- This is a documentation from someone exploring the code and is by no means complete or even completely accurate. Please edit the parts you might find inaccurate. This is probably going to be helpful nonetheless.
+ This is a documentation from someone exploring the code and is by no means complete or even completely accurate. Please edit the parts you might find inaccurate. This is probably going to be helpful nonetheless.
- [How to build OrcaSlicer](How-to-build)
- [How to run tests](How-to-test)
diff --git a/doc/calibration/Calibration.md b/doc/calibration/Calibration.md
index bc1e5b6a10..db8a9c83d6 100644
--- a/doc/calibration/Calibration.md
+++ b/doc/calibration/Calibration.md
@@ -6,7 +6,7 @@ It covers key aspects such as flow rate, pressure advance, temperature towers, r
To access the calibration features, you can find them in the **Calibration** section of the OrcaSlicer interface.
-
+
> [!IMPORTANT]
> After completing the calibration process, remember to create a new project in order to exit the calibration mode.
@@ -15,43 +15,43 @@ The recommended order for calibration is as follows:
1. **[Temperature](temp-calib):** Start by calibrating the temperature of the nozzle and the bed. This is crucial as it affects the viscosity of the filament, which in turn influences how well it flows through the nozzle and adheres to the print bed.
- 
+ 
2. **[Flow](flow-rate-calib):** Calibrate the flow rate to ensure that the correct amount of filament is being extruded. This is important for achieving accurate dimensions and good layer adhesion.
- 
+ 
3. **[Pressure Advance](pressure-advance-calib):** Calibrate the pressure advance settings to improve print quality and reduce artifacts caused by pressure fluctuations in the nozzle.
- **[Adaptive Pressure Advance](adaptive-pressure-advance-calib):** This is an advanced calibration technique that can be used to further optimize the pressure advance settings for different print speeds and geometries.
- 
+ 
4. **[Retraction](retraction-calib):** Calibrate the retraction settings to minimize stringing and improve print quality. Doing this after Flow and Pressure Advance calibration is recommended, as it ensures that the printer is already set up for optimal extrusion.
- 
+ 
5. **[Max Volumetric Speed](volumetric-speed-calib):** Calibrate the maximum volumetric speed of the filament. This is important for ensuring that the printer can handle the flow rate of the filament without causing issues such as under-extrusion or over-extrusion.
- 
+ 
6. **[Cornering](cornering-calib):** Calibrate the Jerk/Junction Deviation settings to improve print quality and reduce artifacts caused by sharp corners and changes in direction.
- 
+ 
7. **[Input Shaping](input-shaping-calib):** This is an advanced calibration technique that can be used to reduce ringing and improve print quality by compensating for mechanical vibrations in the printer.
- 
+ 
8. **[VFA](vfa-calib):** A VFA speed test is available to find resonance speeds.
- 
+ 
---
**[Tolerance](tolerance-calib):** Calibrate the tolerances of your printer to ensure that it can accurately reproduce the dimensions of the model being printed. This is important for achieving a good fit between parts and for ensuring that the final print meets the desired specifications.
- 
+ 
---
diff --git a/doc/calibration/adaptive-pressure-advance-calib.md b/doc/calibration/adaptive-pressure-advance-calib.md
index a6ed751626..25d4fe4f6d 100644
--- a/doc/calibration/adaptive-pressure-advance-calib.md
+++ b/doc/calibration/adaptive-pressure-advance-calib.md
@@ -12,7 +12,7 @@ This feature introduces the below options under the filament settings:
3. **Pressure advance for bridges:** Sets the desired pressure advance value for bridges. Set it to 0 to disable this feature. Experiments have shown that a lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after a bridge, which is caused by the pressure drop in the nozzle when printing in the air. Therefore, a lower pressure advance value helps counteract this. A good starting point is approximately half your usual PA value.
4. **Adaptive pressure advance measurements:** This field contains the calibration values used to generate the pressure advance profile for the nozzle/printer. Input sets of pressure advance (PA) values and the corresponding volumetric flow speeds and accelerations they were measured at, separated by a comma. Add one set of values per line. More information on how to calibrate the model follows in the sections below.
5. **Pressure advance:** The old field is still needed and is required to be populated with a PA value. A βgood enoughβ median PA value should be entered here, as this will act as a fallback value when performing tool changes, printing a purge/wipe tower for multi-color prints as well as a fallback in case the model fails to identify an appropriate value (unlikely but itβs the ultimate backstop).
-
+
## Pre-Requisites
@@ -49,16 +49,16 @@ Finally, if during calibration you notice that there is little to no variance be
### Expected results
With this feature enabled there should be absolutely no bulge in the corners, just the smooth rounding caused by the square corner velocity of your printer.
-
+
In addition, seams should appear smooth with no bulging or under extrusion.
-
+
Solid infill should have no gaps, pinholes, or separation from the perimeters.
-
+
Compared to with this feature disabled, where the internal solid infill and external-internal perimeters show signs of separation and under extrusion, when PA is tuned for optimal external perimeter performance as shown below.
-
+
## How to calibrate the adaptive pressure advance model
@@ -119,7 +119,7 @@ We, therefore, need to run 12 PA tests as below:
Test parameters needed to build adaptive PA table are printed on the test sample:
-
+
Test sample above was done with acceleration 12000 mm/sΒ² and flow rate 27.13 mmΒ³/s
@@ -127,7 +127,7 @@ Test sample above was done with acceleration 12000 mm/sΒ² and flow rate 27.13 mm
As mentioned earlier, **the print speed is used as a proxy to vary the extrusion flow rate**. Once your PA test is set up, change the gcode preview to βflowβ and move the horizontal slider over one of the herringbone patterns and take note of the flow rate for different speeds.
-
+
### Running the tests
@@ -139,13 +139,13 @@ It is recommended that the PA step is set to a small value, to allow you to make
**If the test is too big to fit on the build plate, increase your starting PA value or the PA step value accordingly until the test can fit.** If the lowest value becomes too high and there is no ideal PA present in the test, focus on increasing the PA step value to reduce the number of herringbones printed (hence the size of the print).
-
+
#### OrcaSlicer 2.3.0 and newer
PA pattern calibration configuration window have been changed to simplify test setup. Now all is needed is to fill list of accelerations and speeds into relevant fields of the calibration window:
-
+
Test patterns generated for each acceleration-speed pair and all parameters are set accordingly. No additional actions needed from user side. Just slice and print all plates generated.
@@ -155,9 +155,9 @@ Refer to [Calibration Guide](Calibration) for more details on batch mode calibra
Setup your PA test as usual from the calibration menu in OrcaSlicer. Once setup, your PA test should look like the below:
-
+
-
+
Now input your identified print speeds and accelerations in the fields above and run the PA tests.
@@ -191,7 +191,7 @@ Concatenate the PA value, the flow value, and the acceleration value into the fi
Remember to paste the values in the adaptive pressure advance measurements text box as shown below, and save your filament profile.
-
+
### Tips
@@ -212,10 +212,10 @@ Higher acceleration and higher flow rate PA tests are easier to identify the opt
However, the lower the flow rate and accelerations are, the range of good values is much wider. Having examined the PA tests even under a microscope, what is evident, is that if you canβt distinguish a value as being evidently better than another (i.e. sharper corner with no gaps) with the naked eye, then both values are correct. In which case, if you canβt find any meaningful difference, simply use the optimal values from the higher flow rates.
- **Too high PA**
-
+
- **Too low PA**
-
+
- **Optimal PA**
-
+
diff --git a/doc/calibration/cornering-calib.md b/doc/calibration/cornering-calib.md
index f076a2d792..923672badc 100644
--- a/doc/calibration/cornering-calib.md
+++ b/doc/calibration/cornering-calib.md
@@ -29,24 +29,24 @@ This test will be set detect automatically your printer firmware type and will a
2. Speed high enough to trigger ringing (e.g., 100 mm/s).
3. Use an opaque, high-gloss filament to make ringing more visible.
2. Open the Cornering test.
- 
+ 
1. In this first approximation, set a wide range of Start and End values.
- If you don't see any loss of quality, increase the End value and retry.
- If you do see a loss of quality, measure the maximum height when the corners start losing sharpness and read the Cornering/Jerk/JunctionDeviation value set at that point in OrcaSlicer.
- 
- 
+ 
+ 
2. Print a new calibration tower with a maximum set near the point where corners start losing sharpness.
**RECOMMENDED:** Use the *Ringing Tower* test model to more easily visualize the jerk limit.
3. Print the second Cornering test with the new maximum value.
- 
+ 
4. Measure the maximum height when the corners start losing sharpness and read the Cornering/Jerk/JunctionDeviation value set at that point in OrcaSlicer.
- 
- 
+ 
+ 
3. Save the settings
- Into your OrcaSlicer printer profile (**RECOMMENDED**):
1. Go to Printer settings β Motion ability β Jerk limitation:
2. Set your maximum Jerk X and Y or Junction Deviation values.
- 
+ 
- Directly into your printer firmware:
- Restore your 3D Printer settings to avoid keeping high acceleration and jerk values used for the test.
diff --git a/doc/calibration/flow-rate-calib.md b/doc/calibration/flow-rate-calib.md
index 21fd73d93a..246d4bb90d 100644
--- a/doc/calibration/flow-rate-calib.md
+++ b/doc/calibration/flow-rate-calib.md
@@ -14,7 +14,7 @@ A properly calibrated flow ratio ensures consistent layer adhesion and accurate
> [!WARNING]
> **BambuLab Printers:** Make sure you do **not** select the 'Flow calibration' option.
-> 
+> 
> [!NOTE]
> After v2.3.0, the [Top Pattern](strength_settings_top_bottom_shells#surface-pattern) changed to [Archimedean chords](strength_settings_patterns#archimedean-chords) from [Monotonic Line](strength_settings_patterns#monotonic-line).
@@ -34,18 +34,18 @@ This method uses the [Archimedean Chords](strength_settings_patterns#archimedean
This method is based on the filament's current flow ratio, so make sure you select the correct filament before proceeding.
2. In the `Calibration` menu, under the `Flow Rate` section, select `YOLO (Recommended)`.
3. A new project with eleven blocks will be created, each with a different flow rate modifier. Slice and print the project.
- 
+ 
4. Examine the printed blocks and identify the one with the best surface quality. Look for:
1. The smoothest top surface.
2. No visible gaps between the pattern arcs.
3. Minimal or no visible line between the Inner Spiral and the Outer Arcs.
- 
+ 
In this example, the block with a flow modifier of `+0.01` produced the best results, despite a visible line between the Inner Spiral and the Outer Arcs; reducing the flow further begins to show gaps between the lines.
- 
+ 
5. Update the flow ratio in the filament settings using the equation: `OldFlowRatio Β± modifier`.
If your previous flow ratio was `0.98` and you selected the block with a flow rate modifier of `+0.01`, the new value would be: `0.98 + 0.01 = 0.99`.
**Remember** to save the filament profile.
- 
+ 
> [!NOTE]
> The new Archimedean chords pattern uses a specific print order that prints the inner spiral last so you can check for material accumulation on the contact line at the end.
@@ -54,23 +54,23 @@ This method uses the [Archimedean Chords](strength_settings_patterns#archimedean
This example uses the Monotonic Line pattern with the 2-Pass Calibration approach.
-
+
1. Select the printer, filament, and process you want to use for the test.
2. In the `Calibration` menu, under the `Flow Rate` section, select `Pass 1`.
3. A new project with nine blocks will be created, each with a different flow rate modifier. Slice and print the project.
4. Examine the blocks and determine which one has the smoothest top surface.
- 
- 
+ 
+ 
5. Update the flow ratio in the filament settings using the equation: `OldFlowRatio * (100 + modifier) / 100`.
For example, if your previous flow ratio was `0.98` and you selected the block with a flow rate modifier of `+5`, the new value would be: `0.98 Γ (100 + 5) / 100 = 1.029`.
**Remember** to save the filament profile.
6. Perform the `Pass 2` calibration. This process is similar to `Pass 1`, but a new project with ten blocks will be generated. The flow rate modifiers for this project will range from `-9` to `0`.
7. Repeat steps 4 and 5. For example, if your previous flow ratio was `1.029` and you selected the block with a flow rate modifier of `-6`, the new value would be: `1.029 Γ (100 - 6) / 100 = 0.96726`.
**Remember** to save the filament profile.
- 
- 
- 
+ 
+ 
+ 
> [!TIP]
> @ItsDeidara has created an HTML tool to help with these calculations. Check it out if you find the equations confusing: [Orca-Slicer-Assistant](https://github.com/ItsDeidara/Orca-Slicer-Assistant).
diff --git a/doc/calibration/input-shaping-calib.md b/doc/calibration/input-shaping-calib.md
index b91ee7cb5e..651559d416 100644
--- a/doc/calibration/input-shaping-calib.md
+++ b/doc/calibration/input-shaping-calib.md
@@ -60,22 +60,22 @@ Every firmware and even its version may have a different default type but usuall
2. Select the [Input Shaper Type](#types) you want to test. Each firmware has different types available and each type has different performance.
3. Select a range of frequencies to test. The Default 15hz to 110hz range is usually a good start.
4. Select your damping. Usually, a value between 0.1 and 0.2 is a good start but you can change it to 0 and your printer will use the firmware default value (if available).
- 
+ 
1. Measure the X and Y heights and read the frequency set at that point in OrcaSlicer.
- 
+ 
- Marlin:
- 
+ 
- Klipper:
- 
+ 
2. If not a clear result, you can measure a X and Y min and max acceptable heights and repeat the test with that min and max value.
5. Print the Damping test setting your X and Y frequency to the value you found in the previous step.
- 
+ 
1. Measure the X and Y heights and read the damping set at that point in OrcaSlicer.
- 
+ 
- Marlin:
- 
+ 
- Klipper:
- 
+ 
6. **Restore your 3D Printer settings to avoid keep using high acceleration and jerk values.**
7. Save the settings
diff --git a/doc/calibration/pressure-advance-calib.md b/doc/calibration/pressure-advance-calib.md
index d34ebf135c..3bea6c8e06 100644
--- a/doc/calibration/pressure-advance-calib.md
+++ b/doc/calibration/pressure-advance-calib.md
@@ -10,7 +10,7 @@ OrcaSlicer includes three approaches for calibrating the Pressure Advance value.
> [!WARNING]
> **Bambulab Printers:** make sure you do not select the 'Flow calibration' option.
-> 
+> 
- [Calibration](#calibration)
- [Tower method](#tower-method)
@@ -22,7 +22,7 @@ OrcaSlicer includes three approaches for calibrating the Pressure Advance value.
You can use different methods to calibrate the Pressure Advance value, each with its own advantages and disadvantages.
The results from these methods should be saved to the material profile.
-
+
> [!TIP]
> Consider using the [Adaptive Pressure Advance](adaptive-pressure-advance-calib) method for more accurate results.
@@ -35,8 +35,8 @@ The tower method may take a bit more time to complete, but it does not rely on t
1. Select the printer, filament, and process you would like to use for the test.
2. Examine each corner of the print and mark the height that yields the best overall result.
3. In this example a height of 8 mm was selected, so the Pressure Advance value should be calculated as `PressureAdvanceStart + (PressureAdvanceStep x measured)`; example: `0 + (0.002 x 8) = 0.016`.
- 
- 
+ 
+ 
> [!TIP]
> @ItsDeidara has made an HTML tool to help with the calculation. Check it out if those equations give you a headache [here](https://github.com/ItsDeidara/Orca-Slicer-Assistant).
@@ -50,20 +50,20 @@ The pattern method is adapted from [Andrew Ellis' pattern method generator](http
The test configuration window allows the user to generate one or more tests in a single project. Multiple tests will be placed on the plate with extra plates added if needed.
1. Single test \
- 
+ 
2. Batch mode testing (multiple tests on a single plate) \
- 
+ 
Once a test is generated, one or more small rectangular prisms will be placed on the plate, one for each test case. The prism object serves a few purposes:
1. The test pattern itself is added in as custom G-Code at each layer, same as you could do by hand. The rectangular prism provides the layers in which to insert that G-Code. This also means that **you'll see the full test pattern when you move to the Preview pane:**
-
+
2. The prism acts as a handle, enabling you to move the test pattern wherever you'd like on the plate by moving the prism.
3. Each test object is pre-configured with target parameters which are reflected in the object's name. Test parameters may be adjusted for each prism individually via the object list pane:
-
+
Next, Ellis' generator provided the ability to adjust specific printer, filament, and print profile settings. You can make these same changes in OrcaSlicer by adjusting the settings in the Prepare pane as you would with any other print. When you initiate the calibration test, Ellis' default settings are applied. A few things to note about these settings:
@@ -82,8 +82,8 @@ Steps:
2. Print the project and check the result. Choose the value corresponding to the most even line and update your Pressure Advance value in the filament settings.
3. In this test, a Pressure Advance value of `0.016` appears to be optimal.
- 
+ 
- 
+ 
- 
+ 
diff --git a/doc/calibration/retraction-calib.md b/doc/calibration/retraction-calib.md
index 61872dc223..a36b6a6fc1 100644
--- a/doc/calibration/retraction-calib.md
+++ b/doc/calibration/retraction-calib.md
@@ -4,13 +4,13 @@ Retraction is the process of pulling the filament back into the nozzle to preven
This test generates a retraction tower automatically. The retraction tower is a vertical structure with multiple notches, each printed at a different retraction length. After the print is complete, we can examine each section of the tower to determine the optimal retraction length for the filament. The optimal retraction length is the shortest one that produces the cleanest tower.
-
+
-
+
In the dialog, you can select the start and end retraction length, as well as the retraction length increment step. The default values are 0mm for the start retraction length, 2mm for the end retraction length, and 0.1mm for the step. These values are suitable for most direct drive extruders. However, for Bowden extruders, you may want to increase the start and end retraction lengths to 1mm and 6mm, respectively, and set the step to 0.2mm.
-
+
> [!NOTE]
> When testing filaments such as PLA or ABS that have minimal oozing, the retraction settings can be highly effective. You may find that the retraction tower appears clean right from the start. In such situations, setting the retraction length to 0.2mm - 0.4mm using OrcaSlicer should suffice.
diff --git a/doc/calibration/temp-calib.md b/doc/calibration/temp-calib.md
index acdece9a97..7c7f57bf17 100644
--- a/doc/calibration/temp-calib.md
+++ b/doc/calibration/temp-calib.md
@@ -28,14 +28,14 @@ There is no other calibration that can have such a big impact on the print quali
Nozzle temperature is one of the most important settings to calibrate for a successful print. The temperature of the nozzle affects the viscosity of the filament, which in turn affects how well it flows through the nozzle and adheres to the print bed. If the temperature is too low, the filament may not flow properly, leading to under-extrusion, poor layer adhesion and stringing. If the temperature is too high, the filament may degrade, over-extrude and produce stringing.
-
+
-
+
Temp tower is a straightforward test. The temp tower is a vertical tower with multiple blocks, each printed at a different temperature.
Once the print is complete, we can examine each block of the tower and determine the optimal temperature for the filament. The optimal temperature is the one that produces the highest quality print with the least amount of issues, such as stringing, layer adhesion, warping (overhang), and bridging.
-
+
> [!NOTE]
> If a range of temperatures looks good, you may want to use the middle of that range as the optimal temperature.
diff --git a/doc/calibration/tolerance-calib.md b/doc/calibration/tolerance-calib.md
index 23f948de47..79b538a7a4 100644
--- a/doc/calibration/tolerance-calib.md
+++ b/doc/calibration/tolerance-calib.md
@@ -7,7 +7,7 @@ To correct for these variations, OrcaSlicer provides:
- Shrinkage (XY)
- 
+ 
- Process Compensation:
@@ -16,22 +16,22 @@ To correct for these variations, OrcaSlicer provides:
- Precise wall
- Precise Z height
- 
+ 
## Handy Models
OrcaSlicer includes several handy models to help you test and calibrate your printer.
Right-click on your plate in Prepare mode and select "Add Handy Model" to access these models.
-
+
### Orca Tolerance Test
This calibration test is designed to evaluate the dimensional accuracy of your printer and filament. The model consists of a base with six hexagonal holes, each with a different tolerance: 0.0 mm, 0.05 mm, 0.1 mm, 0.2 mm, 0.3 mm, and 0.4 mm, as well as a hexagon-shaped tester.
-
+
You can check the tolerance using either an M6 Allen key or the included printed hexagon tester.
Use calipers to measure both the holes and the inner tester. Based on your results, you can fine-tune the X-Y hole compensation and X-Y contour compensation settings. Repeat the process until you achieve the desired precision.
-
-
+
+
diff --git a/doc/calibration/vfa-calib.md b/doc/calibration/vfa-calib.md
index 0a064cd13c..e646175c49 100644
--- a/doc/calibration/vfa-calib.md
+++ b/doc/calibration/vfa-calib.md
@@ -11,12 +11,12 @@ Vertical Fine Artifacts (VFA) are small surface imperfections that appear on ver
The VFA Speed Test in OrcaSlicer helps identify which print speeds trigger MRR artifacts. It prints a vertical tower with walls at various angles while progressively increasing the print speed.
-
+
-
+
After printing, inspect the tower for MRR artifacts. Look for speeds where the surface becomes visibly smoother or rougher. This allows you to pinpoint problematic speed ranges.
You can then configure the **Resonance Avoidance Speed Range** in the printer profile to skip speeds that cause visible artifacts.
-
+
diff --git a/doc/calibration/volumetric-speed-calib.md b/doc/calibration/volumetric-speed-calib.md
index 872a068aa3..fd6a9e942f 100644
--- a/doc/calibration/volumetric-speed-calib.md
+++ b/doc/calibration/volumetric-speed-calib.md
@@ -19,10 +19,10 @@ Once printed, take note of where the layers begin to fail and where the quality
> [!TIP]
> A **change in surface sheen** (glossy vs. matte) is often a visual cue of material degradation or poor layer adhesion.
-
+
Use calipers or a ruler to measure the **height** of the model just before the defects begin.
-
+
Then you can:
@@ -35,10 +35,10 @@ Use calipers or a ruler to measure the **height** of the model just before the d
In this case (19mm), so the calculation would be: `5 + (19 * 0.5) = 14.5mmΒ³/s`
- Use OrcaSlicer in the "Preview" tab, make sure the color scheme "flow" is selected. Scroll down to the layer height that you measured, and click on the toolhead slider. This will indicate the max flow level for your filament.
-
+
After you have determined the maximum volumetric speed, you can set it in the filament settings. This will ensure that the printer does not exceed the maximum flow rate for the filament.
-
+
> [!NOTE]
> This test is a best case scenario and doesn't take into account Retraction or other settings that can increase clogs or under-extrusion.
diff --git a/doc/developer-reference/How-to-build.md b/doc/developer-reference/How-to-build.md
index 134ff15b1e..77cadf566d 100644
--- a/doc/developer-reference/How-to-build.md
+++ b/doc/developer-reference/How-to-build.md
@@ -70,8 +70,8 @@ How to building with Visual Studio on Windows 64-bit.
> If you see an older version (e.g. 3.29), it's likely due to another copy in your system's PATH (e.g. from Strawberry Perl).
> You can run where cmake to check the active paths and rearrange your **System Environment Variables** > PATH, ensuring the correct CMake (e.g. C:\Program Files\CMake\bin) appears before others like C:\Strawberry\c\bin.
-
-
+
+
> [!IMPORTANT]
> **For Visual Studio 2026**, you must use the CMake included with Visual Studio 2026 **until CMake 4.2 is released as a stable version**.
@@ -95,7 +95,7 @@ How to building with Visual Studio on Windows 64-bit.
- If using the command line:
1. Clone the repository:
```shell
- git clone https://github.com/SoftFever/OrcaSlicer
+ git clone https://github.com/OrcaSlicer/OrcaSlicer
```
2. Run lfs to download tools on Windows:
```shell
@@ -118,7 +118,7 @@ How to building with Visual Studio on Windows 64-bit.
build_release_vs.bat
```
-
+
> [!NOTE]
> The build process will take a long time depending on your system but even with high-end hardware it can take up to 40 minutes.
@@ -131,7 +131,7 @@ How to building with Visual Studio on Windows 64-bit.
build\OrcaSlicer.sln
```
2. Open the solution in Visual Studio, set the build configuration to `Release` and run the `Local Windows Debugger`.
- 
+ 
3. Your resulting executable will be located in:
```shell
\build\src\Release\orca-slicer.exe
@@ -192,7 +192,7 @@ cmake --version
1. Clone the repository:
```shell
- git clone https://github.com/SoftFever/OrcaSlicer
+ git clone https://github.com/OrcaSlicer/OrcaSlicer
cd OrcaSlicer
```
2. Build the application:
@@ -235,7 +235,7 @@ How to build and run OrcaSlicer using Docker.
#### Docker Instructions
```shell
-git clone https://github.com/SoftFever/OrcaSlicer && cd OrcaSlicer && ./scripts/DockerBuild.sh && ./scripts/DockerRun.sh
+git clone https://github.com/OrcaSlicer/OrcaSlicer && cd OrcaSlicer && ./scripts/DockerBuild.sh && ./scripts/DockerRun.sh
```
### Troubleshooting
diff --git a/doc/developer-reference/How-to-create-profiles.md b/doc/developer-reference/How-to-create-profiles.md
index 2c92d40b32..2dad9da7fa 100644
--- a/doc/developer-reference/How-to-create-profiles.md
+++ b/doc/developer-reference/How-to-create-profiles.md
@@ -139,9 +139,9 @@ The following sample JSON file shows how to create a new generic filament profil
> When developing profiles, you may notice that changes aren't reflected in OrcaSlicer after editing profile files. This happens because OrcaSlicer caches profiles in the system folder.
> To force OrcaSlicer to load your updated profiles:
> 1. **Access the configuration folder**: Go to **Help** β **Show Configuration Folder**
-> 
+> 
> 2. **Clear the cache**: Delete the `system` folder to remove cached profiles
-> 
+> 
> 3. **Restart OrcaSlicer**: Launch the application to load your updated profiles
> This process forces OrcaSlicer to update its profile cache from the source files in the `resources/profiles/` directory.
diff --git a/doc/developer-reference/How-to-wiki.md b/doc/developer-reference/How-to-wiki.md
index e59f5408da..bdf576746b 100644
--- a/doc/developer-reference/How-to-wiki.md
+++ b/doc/developer-reference/How-to-wiki.md
@@ -40,12 +40,12 @@ The Home page is the starting point for the OrcaSlicer wiki. From there you can
When you create a new page or section, link it from the Home page under the appropriate category.
The Home page currently organizes content in these top-level entries:
--  [Printer Settings](home#printer-settings)
--  [Material Settings](home#material-settings)
--  [Process Settings](home#process-settings)
--  [Prepare](home#prepare)
--  [Calibrations](home#calibrations)
--  [Developer Section](home#developer-section)
+-  [Printer Settings](home#printer-settings)
+-  [Material Settings](home#material-settings)
+-  [Process Settings](home#process-settings)
+-  [Prepare](home#prepare)
+-  [Calibrations](home#calibrations)
+-  [Developer Section](home#developer-section)
Each section can have multiple pages covering specific topics. For example, the [Process Settings](home#process-settings) section includes pages on [quality](home#quality-settings), [support](home#support-settings), and [others](home#others-settings).
@@ -86,7 +86,7 @@ When creating new pages, follow these file-naming conventions:
OrcaSlicer can redirect users from the GUI to the appropriate wiki pages, making it easier to find relevant documentation.
-The option-to-wiki mapping is defined in [src/slic3r/GUI/Tab.cpp](https://github.com/SoftFever/OrcaSlicer/blob/main/src/slic3r/GUI/Tab.cpp). Any option added with `append_single_option_line` can be mapped to a wiki page using a second string argument.
+The option-to-wiki mapping is defined in [src/slic3r/GUI/Tab.cpp](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/slic3r/GUI/Tab.cpp). Any option added with `append_single_option_line` can be mapped to a wiki page using a second string argument.
```cpp
optgroup->append_single_option_line("OPTION_NAME"); // Option without wiki page/redirection
@@ -167,7 +167,7 @@ Format = ``
- Base URL:
```markdown
- https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/
+ https://github.com/OrcaSlicer/OrcaSlicer/blob/main/doc/images/
```
- Raw tag:
@@ -181,13 +181,13 @@ Format = ``
- For an image in `doc/images/` named `calibration.png`:
```markdown
- 
+ 
```
- For an image in a subdirectory like `doc/images/GUI/combobox.png`:
```markdown
- 
+ 
```
> [!IMPORTANT]
@@ -214,7 +214,7 @@ HTML Format = `
+
```
### Image Cropping and Highlighting
diff --git a/doc/developer-reference/Localization_guide.md b/doc/developer-reference/Localization_guide.md
index c5d473901f..758160e88c 100644
--- a/doc/developer-reference/Localization_guide.md
+++ b/doc/developer-reference/Localization_guide.md
@@ -14,7 +14,7 @@ Full manual for GNUgettext can be seen here: [http://www.gnu.org/software/gettex
### Scenario 1. How do I add a translation or fix an existing translation
1. Get PO-file 'OrcaSlicer_xx.pot' from corresponding sub-folder here:
- [https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n](https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n)
+ [https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n](https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n)
2. Open this file in PoEdit as "Edit a translation"
3. Apply your corrections to the translation
4. Push changed OrcaSlicer_xx.po into the original folder
@@ -23,14 +23,14 @@ Full manual for GNUgettext can be seen here: [http://www.gnu.org/software/gettex
### Scenario 2. How do I add a new language support
1. Get file OrcaSlicer.pot here :
- [https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n](https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n)
+ [https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n](https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n)
2. Open it in PoEdit for "Create new translation"
3. Select Translation Language (for example French).
4. As a result you will have fr.po - the file containing translation to French.
Notice. When the translation is complete you need to:
- Rename the file to OrcaSlicer_fr.po
- Click "Save file" button. OrcaSlicer_fr.mo will be created immediately
- - Bambu_Studio_fr.po needs to be copied into the sub-folder fr of [https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n](https://github.com/softfever/OrcaSlicer/tree/master/localization/i18n), and be pushed
+ - Bambu_Studio_fr.po needs to be copied into the sub-folder fr of [https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n](https://github.com/OrcaSlicer/OrcaSlicer/tree/master/localization/i18n), and be pushed
- copy OrcaSlicer_xx.mo into resources/i18n/xx and rename it to OrcaSlicer.mo, then push the changed file.
( name of folder "fr" means "French" - the translation language).
@@ -48,7 +48,7 @@ If you add new file resource, add it to the list of files containing macro `L()`
### Scenario 4. How do I use GNUgettext to localize my own application taking OrcaSlicer as an example
1. For convenience create a list of files with this macro `L(s)`. We have
- https://github.com/softfever/OrcaSlicer/blob/master/localization/i18n/list.txt.
+ https://github.com/OrcaSlicer/OrcaSlicer/blob/master/localization/i18n/list.txt.
2. Create template file(*.POT) with GNUgettext command:
diff --git a/doc/developer-reference/Preset-and-bundle.md b/doc/developer-reference/Preset-and-bundle.md
index 4c4b35f3e9..e71032bd2c 100644
--- a/doc/developer-reference/Preset-and-bundle.md
+++ b/doc/developer-reference/Preset-and-bundle.md
@@ -2,7 +2,7 @@
This page deals with the explanation for 3 classes in the code.
-## [`Preset`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/libslic3r/Preset.hpp)
+## [`Preset`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/libslic3r/Preset.hpp)
As the name might suggest this class deals with presets for various things. It defines an enum `Type` which basically tells you what kind of data the present contains. Below are a few explained and there corresponding UI elements
@@ -11,19 +11,19 @@ As the name might suggest this class deals with presets for various things. It d
- `TYPE_PRINT`: Refers to a process preset. It's called 'Print' probably due to some legacy code.
-
+
- `TYPE_FILAMENT`: As the name suggests this preset is for filaments
-
+
- `TYPE_PRINTER`: Preset for printers.
-
+
There are other preset types but some of them are for SLA. Which is legacy code, since SLA printers are no longer supported. Above 3 are the important types.
-## [`PresetBundle`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/libslic3r/PresetBundle.hpp)
+## [`PresetBundle`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/libslic3r/PresetBundle.hpp)
This is a bundle containing a few types of `PresetCollection`. One bundle has presets for some printers, filaments and some processes (TYPE_PRINT).
@@ -36,7 +36,7 @@ each one of these contains a collection of processes, filaments and printers res
> [!IMPORTANT]
> Printers, filaments and processes in the bundle don't all have to be compatible with each other. In fact all the saved presets are stored in one `PresetBundle`. The `PresetBundle` is loaded on start up. The list of filaments and processes shown for a particular printer is a subset of `filaments` and `prints` `PresetCollection`s.
-## [`PresetCollection`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/libslic3r/Preset.hpp)
+## [`PresetCollection`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/libslic3r/Preset.hpp)
`PrinterPresetCollection` is a class derived from `PresetCollection`.
diff --git a/doc/developer-reference/plater-sidebar-tab-combobox.md b/doc/developer-reference/plater-sidebar-tab-combobox.md
index c0dc28a109..66e631be35 100644
--- a/doc/developer-reference/plater-sidebar-tab-combobox.md
+++ b/doc/developer-reference/plater-sidebar-tab-combobox.md
@@ -5,24 +5,24 @@ WIP...
> [!WARNING]
> !! incomplete, possibly inaccurate, being updated with new info !!
-## [`Plater`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/slic3r/GUI/Plater.hpp)
+## [`Plater`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/slic3r/GUI/Plater.hpp)
Refers to the entire application. The whole view, file loading, project saving and loading is all managed by this class. This class contains members for the model viewer, the sidebar, gcode viewer and everything else.
-## [`Sidebar`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/slic3r/GUI/Plater.hpp)
+## [`Sidebar`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/slic3r/GUI/Plater.hpp)
This is relating the the sidebar in the application window
-
+
-## [`ComboBox`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/slic3r/GUI/Widgets/ComboBox.hpp)
+## [`ComboBox`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/slic3r/GUI/Widgets/ComboBox.hpp)
The drop down menus where you can see and select presets
-
+
-## [`Tab`](https://github.com/SoftFever/OrcaSlicer/blob/main/src/slic3r/GUI/Tab.hpp)
+## [`Tab`](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/src/slic3r/GUI/Tab.hpp)
Refers to the various windows with settings. e.g. the Popup to edit printer or filament preset. Also the section to edit process preset and the object list. These 4 are managed by `TabPrinter`, `TabFilament`, `TabPrint` and `TabPrintModel` respectively.
-
+
diff --git a/doc/print_prepare/stl-transformation.md b/doc/print_prepare/stl-transformation.md
index 3dd56ff40d..b4056179fb 100644
--- a/doc/print_prepare/stl-transformation.md
+++ b/doc/print_prepare/stl-transformation.md
@@ -5,7 +5,7 @@ OrcaSlicer primarily relies on STL meshes for slicing, but STL files may come wi
Typically, STL files feature a low polygon count, which can adversely affect print quality.
In contrast, using STEP files offers a higher-quality mesh that more accurately represents the original design. However, be aware that both high-polygon STL and STEP files can increase slicing time.
-
+
## Importing STEP files
@@ -13,14 +13,14 @@ This setting determines how STEP files are converted into STL files and is displ
If you don't see this when opening a STEP file, check [Don't show again](#dont-show-again) below.
-
+
### Parameters:
The transformation uses [Linear Deflection and Angular Deflection](https://dev.opencascade.org/doc/overview/html/occt_user_guides__mesh.html) parameters to control the mesh quality.
A finer mesh will result in a more accurate representation of the original surface, but it will also increase the file size and processing time.
-
+
- **Linear Deflection:** Specifies the maximum distance allowed between the original surface and its polygonal approximation. Lower values produce a mesh that more accurately follows the original curvature.
- **Angular Deflection:** Defines the maximum allowable angle difference between the actual surface and its tessellated counterpart. Smaller angular deflection values yield a more precise mesh.
@@ -29,14 +29,14 @@ A finer mesh will result in a more accurate representation of the original surfa
Enabling this option will split the imported 3D file into separate objects. This is especially useful for adjusting individual object positions, tweaking print settings, or optimizing the model through simplification.
-
+
#### Don't show again
This option will hide the STL transformation dialog when opening a STEP file.
To restore the dialog, go to "Preferences" (Ctrl + P) > "Show the STEP mesh parameter setting dialog".
-
+
## Simplify model
@@ -46,7 +46,7 @@ This function is especially useful for improving the performance of the slicer o
To access the Simplify Model option, right-click on the object to simplify in the "Prepare" menu.
-
+
It is recommended to enable the "Show Wireframe" option when running a simplification process to visually inspect the outcome. However, be cautious: overly aggressive simplification may lead to noticeable detail loss, increased ringing, or other printing issues.
diff --git a/doc/print_settings/others/others_settings_brim.md b/doc/print_settings/others/others_settings_brim.md
index 351c63c0dc..d92fd5d7dc 100644
--- a/doc/print_settings/others/others_settings_brim.md
+++ b/doc/print_settings/others/others_settings_brim.md
@@ -2,7 +2,7 @@
Brim is a flat layer printed around a model's base to improve adhesion to the print bed. It is useful for models with small footprints or those prone to warping.
-
+
- [Type](#type)
- [Auto](#auto)
@@ -44,28 +44,28 @@ The computed brim width is capped at 20 mm and at 1.5Γ the thermal length. If t
### Painted
-Generates a brim only on areas that have been painted  in the Prepare tab .
+Generates a brim only on areas that have been painted  in the Prepare tab .
### Outer
Creates a brim around the model's outer perimeter.
Easier to remove than an inner brim, but may affect the model's appearance if not removed cleanly.
-
+
### Inner
Creates a brim around inner perimeters.
More difficult to remove and less effective than an outer brim and may obscure fine inner details, but it can hide the brim removal seam.
-
+
### Outer and Inner
Creates a brim around both the outer and inner perimeters of the model.
This approach combines the **disadvantages** of both brim types, making it more difficult to remove while potentially obscuring fine details but improving overall adhesion.
-
+
> [!TIP]
>> Consider using a [raft](support_settings_raft) on complex models/materials.
@@ -75,7 +75,7 @@ This approach combines the **disadvantages** of both brim types, making it more
Mouse ears are small, local brim extensions (typically placed near corners and sharp features) that improve bed adhesion and reduce warping while using less material than a full brim.
The geometry analysis routine selects candidate locations based on the configured angle threshold and detection radius.
-
+
#### Ear max angle
diff --git a/doc/print_settings/others/others_settings_fuzzy_skin.md b/doc/print_settings/others/others_settings_fuzzy_skin.md
index a02a11c96e..1af664214f 100644
--- a/doc/print_settings/others/others_settings_fuzzy_skin.md
+++ b/doc/print_settings/others/others_settings_fuzzy_skin.md
@@ -50,14 +50,14 @@ Select the underlying method used to produce the fuzzy effect. Each mode has dif
### Displacement
-
+
The classic method is when the pattern on the walls is achieved by shifting the printhead perpendicular to the wall.
It gives a predictable result, but decreases the strength entire shells and open the pores inside the walls. It also increases the mechanical stress on the kinematics of the printer. The speed of general printing is slowing down.
### Extrusion
-
+
The fuzzy skin condition is obtained by changing the amount of extruded plastic as the print head moves linearly. There is no extra load on the kinematics, there is no decrease in the printing speed, the pores do not open, but the drawing turns out to be smoother by a factor of 2. It is suitable for creating "loose" walls to reduce internal stress into extruded plastic, or masking printing defects on the side walls - a matte effect.
@@ -67,7 +67,7 @@ The fuzzy skin condition is obtained by changing the amount of extruded plastic
### Combined
-
+
This is a combination of Displacement and Extrusion modes. The clarity of the drawing is the same in the classic mode, but the walls remain strong and tight. The load on the kinematics is 2 times lower. The printing speed is faster than in Displacement mode, but the elapsed time will still be longer.
@@ -82,31 +82,31 @@ Select the noise algorithm used to generate the random offsets. Different noise
Simple uniform random noise. Produces a coarse, irregular texture.
-
+
### Perlin
[Perlin noise](https://en.wikipedia.org/wiki/Perlin_noise) generates smooth, natural-looking variations with coherent structure.
-
+
### Billow
Billow noise is similar to Perlin noise, but has a clumpier appearance. It can create more pronounced features and is often used for natural textures.
-
+
### Ridged Multifractal
Creates sharp, jagged features and high-contrast detail. Useful for stone- or marble-like textures.
-
+
### Voronoi
[Voronoi noise](https://en.wikipedia.org/wiki/Worley_noise) divides the surface into Voronoi cells and displaces each cell independently, creating a patchwork or cellular texture.
-
+
## Point distance
diff --git a/doc/print_settings/others/others_settings_skirt.md b/doc/print_settings/others/others_settings_skirt.md
index 0f2ef8b4ab..a3d80dbf9d 100644
--- a/doc/print_settings/others/others_settings_skirt.md
+++ b/doc/print_settings/others/others_settings_skirt.md
@@ -20,7 +20,7 @@ Number of skirt loops to print.
Usually 2 loops are recommended but increasing loops improve priming and give a larger buffer between the nozzle and the part, at the cost of extra filament and time.
Set to 0 to disable the skirt.
-
+
## Type
@@ -29,14 +29,14 @@ Set to 0 to disable the skirt.
A single skirt that surrounds all objects on the bed.
Recommended for general use.
-
+
### Per object
Each object gets its own skirt printed separately.
Recommended when using [Print sequence by object](others_settings_special_mode#by-object).
-
+
## Minimum extrusion Length
diff --git a/doc/print_settings/others/others_settings_special_mode.md b/doc/print_settings/others/others_settings_special_mode.md
index 753fe4415c..4a627f1c37 100644
--- a/doc/print_settings/others/others_settings_special_mode.md
+++ b/doc/print_settings/others/others_settings_special_mode.md
@@ -31,7 +31,7 @@ Use this for most prints where no special modifications are needed.
Use "Close holes" to automatically close all holes in the model during slicing in the XY plane.
This can help with models that have gaps or incomplete surfaces, ensuring a more solid print.
-
+
### Even Odd
diff --git a/doc/print_settings/quality/quality_settings_bridging.md b/doc/print_settings/quality/quality_settings_bridging.md
index 19e594417c..09f21dea6d 100644
--- a/doc/print_settings/quality/quality_settings_bridging.md
+++ b/doc/print_settings/quality/quality_settings_bridging.md
@@ -21,7 +21,7 @@ The actual internal bridge flow used is calculated by multiplying this value wit
## Thick bridges
-
+
When enabled, thick bridges increase the reliability and strength of bridges, allowing you to span longer distances. However, this may result in a rougher surface finish.
Disabling this option can improve the visual quality of bridges, but is recommended only for shorter spans or when using large nozzle sizes.
@@ -64,8 +64,8 @@ This option creates bridges for counterbore holes, allowing them to be printed w
Available modes include:
- **None:** No bridge is created.
- 
+ 
- **Partially Bridged:** Only a part of the unsupported area will be bridged, creating a supporting layer for the next layer.
- 
+ 
- **Sacrificial Layer:** A full sacrificial bridge layer is created. This will close the counterbore hole, allowing the next layer to be printed without sagging. The sacrificial layer must be broken through after printing.
- 
+ 
diff --git a/doc/print_settings/quality/quality_settings_ironing.md b/doc/print_settings/quality/quality_settings_ironing.md
index c9b46b3889..5473411fb7 100644
--- a/doc/print_settings/quality/quality_settings_ironing.md
+++ b/doc/print_settings/quality/quality_settings_ironing.md
@@ -2,7 +2,7 @@
Ironing is a process used to improve the surface finish of 3D prints by smoothing out the top layers. This is achieved by printing a second time at the same height, but with a very [low flow rate](#flow) and a specific [pattern](#pattern). The result is a smoother surface that can enhance the aesthetic quality of the print increasing print time.
-
+
> [!IMPORTANT]
> Ironing can cause filament to move very slowly through the hotend, which increases the risk of heat creep and potential clogging. Monitor your printer during ironing and ensure your hotend cooling is adequate to prevent jams.
@@ -12,11 +12,11 @@ Ironing is a process used to improve the surface finish of 3D prints by smoothin
This setting controls which layer being ironed.
- **Top Surfaces**: All [top surfaces](strength_settings_top_bottom_shells) will be ironed. This is the most common setting and is used to smooth out the top layers of the print.
- 
+ 
- **Topmost Surface**: Only the last [top layer](strength_settings_top_bottom_shells) of the print will be ironed. This is useful for prints where only the last layer needs to be smoothed.
- 
+ 
- **All solid layers**: All solid layers, including [internal solid infill](strength_settings_infill#internal-solid-infill) and [top layers](strength_settings_top_bottom_shells), will be ironed. This can be useful for prints that require a very smooth finish on all solid surfaces but may increase print time significantly.
- 
+ 
## Pattern
@@ -46,7 +46,7 @@ It's recommended to set this value to be equal to or less than the nozzle diamet
The distance to keep from the edges, which can help prevent over-extrusion at the edges of the surface being ironed.
-
+
If this value is set to 0, the ironing toolpath will start directly at the perimeter edges without any inward offset. This means the [ironing pattern](#pattern) will extend all the way to the outer boundaries of the top surface being ironed.
@@ -54,7 +54,7 @@ If this value is set to 0, the ironing toolpath will start directly at the perim
The angle of ironing lines offset relative to the top surface solid infill direction.
-Commonly used ironing angle offsets are 0Β°, 45Β°, and 90Β° each producing a [different surface finish](https://github.com/SoftFever/OrcaSlicer/issues/10834#issuecomment-3322628589) which will depend on your printer nozzle.
+Commonly used ironing angle offsets are 0Β°, 45Β°, and 90Β° each producing a [different surface finish](https://github.com/OrcaSlicer/OrcaSlicer/issues/10834#issuecomment-3322628589) which will depend on your printer nozzle.
## Fixed Angle
diff --git a/doc/print_settings/quality/quality_settings_layer_height.md b/doc/print_settings/quality/quality_settings_layer_height.md
index 4fd695faef..8a92e75f69 100644
--- a/doc/print_settings/quality/quality_settings_layer_height.md
+++ b/doc/print_settings/quality/quality_settings_layer_height.md
@@ -9,7 +9,7 @@ Using smaller layer heights increases print time but results in:
- Enhanced detail on curves
- [Better performance on overhangs](#layer-height-overhangs-impacts)
-
+
- [Quick Reference](#quick-reference)
- [Layer Height Guidelines](#layer-height-guidelines)
@@ -47,6 +47,6 @@ A thicker first layer improves bed adhesion and compensates for build surface im
Layer height directly affects [overhang angle](quality_settings_overhangs#maximum-angle) capability and quality.
-
+
**Smaller layer heights** enable steeper overhangs by reducing the unsupported distance between layers, while **larger layer heights** increase this gap, leading to more sagging and requiring support material at shallower angles.
diff --git a/doc/print_settings/quality/quality_settings_overhangs.md b/doc/print_settings/quality/quality_settings_overhangs.md
index a3cddcb4f6..3251d4f393 100644
--- a/doc/print_settings/quality/quality_settings_overhangs.md
+++ b/doc/print_settings/quality/quality_settings_overhangs.md
@@ -14,7 +14,7 @@
Detect the overhang percentage relative to line width and use different speed to print.
When detecting line width with 100% overhang, bridge options are used.
-
+
## Make overhang printable
@@ -26,7 +26,7 @@ Every overhang exceeding the [maximum angle](#maximum-angle) will be modified to
Maximum angle of overhangs to allow after making more steep overhangs printable.
90Β° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material.
-
+
> [!TIP]
> Usually, a value between 45Β° and 60Β° works well for most printers and models.
@@ -40,7 +40,7 @@ A value of 0 will fill all the holes in the model base.
Create additional perimeter (overhang wall) paths over steep overhangs and areas where bridges cannot be anchored.
-
+
## Reverse on even
@@ -52,7 +52,7 @@ It can also help reduce warping on floating regions over supports.
For this setting to be the most effective, it is recommended to set the [Reverse Threshold](#reverse-threshold) to 0 so that all walls print in alternating directions on even layers irrespective of their overhang degree.
A disadvantage of this setting is that the outer wall may show a texture due to the alternating extrusion direction.
-
+
> [!NOTE]
> Only be available if [Wall loop direction](quality_settings_wall_and_surfaces#wall-loop-direction) is set on **Auto** and [spiral vase mode](others_settings_special_mode#spiral-vase) is **disabled**.
diff --git a/doc/print_settings/quality/quality_settings_precision.md b/doc/print_settings/quality/quality_settings_precision.md
index 58a47ef893..e9a2386356 100644
--- a/doc/print_settings/quality/quality_settings_precision.md
+++ b/doc/print_settings/quality/quality_settings_precision.md
@@ -30,7 +30,7 @@ After a model is sliced this feature will replace straight line segments with ar
This will result in a smaller G-code file for the same model, as arcs are used instead of many short line segments. This can improve print quality and reduce printing time, especially for curved surfaces.
-
+
> [!IMPORTANT]
> This option is only available for machines that support G2 and G3 commands and may impact in CPU usage on the printer.
@@ -44,7 +44,7 @@ Klipper does not benefit from arc commands as these are split again into line se
Used to compensate external dimensions of the model.
With this option you can compensate material expansion or shrinkage, which can occur due to various factors such as the type of filament used, temperature fluctuations, or printer calibration issues.
-Follow the [Calibration Guide](https://github.com/SoftFever/OrcaSlicer/wiki/Calibration) and [Filament Tolerance Calibration](https://github.com/SoftFever/OrcaSlicer/wiki/tolerance-calib) to determine the correct value for your printer and filament combination.
+Follow the [Calibration Guide](https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration) and [Filament Tolerance Calibration](https://github.com/OrcaSlicer/OrcaSlicer/wiki/tolerance-calib) to determine the correct value for your printer and filament combination.
## Elephant foot compensation
@@ -55,11 +55,11 @@ This feature compensates for the "elephant foot" effect, which occurs when the f
- Bed temperature being too high.
- Inaccurate bed height.
-
+
To mitigate this effect, OrcaSlicer allows you to specify a negative distance that will be applied to the first specified number of layers. This adjustment effectively reduces the width of the first few layers, helping to achieve a more accurate final print size.
-
+
The compensation works as follows:
When the `current_layer` is <= `input_compensation_layers`
@@ -101,11 +101,11 @@ Slic3r and its forks, such as PrusaSlicer, SuperSlicer and OrcaSlicer, assume th
- **Precise Wall Off**
- 
+ 
- **Precise Wall On**
- 
+ 
This approach enhances the strength of 3D-printed parts. However, it does have some side effects. For instance, when the inner-outer wall order is used, the outer wall can be pushed outside, leading to potential size inaccuracy and more layer inconsistency.
@@ -123,17 +123,17 @@ By enabling this parameter, the layer height of the last five layers is adjusted
- **Precise Z Height Off**
- 
+ 
- **Precise Z Height On**
- 
+ 
## Polyholes
A polyhole is a technique used in FFF 3D printing to improve the accuracy of circular holes. Instead of modeling a perfect circle, the hole is represented as a polygon with a reduced number of flat sides. This simplification forces the slicer to treat each segment as a straight line, which prints more reliably. By carefully choosing the number of sides and ensuring the polygon sits on the outer boundary of the hole, you can produce openings that more closely match the intended diameter.
-
+
- Original implementation: [SuperSlicer Polyholes](https://github.com/supermerill/SuperSlicer/wiki/Polyholes)
- Idea and mathematics: [Hydraraptor](https://hydraraptor.blogspot.com/2011/02/polyholes.html)
diff --git a/doc/print_settings/quality/quality_settings_seam.md b/doc/print_settings/quality/quality_settings_seam.md
index b0a5dce3a3..4a77879da7 100644
--- a/doc/print_settings/quality/quality_settings_seam.md
+++ b/doc/print_settings/quality/quality_settings_seam.md
@@ -42,7 +42,7 @@ However, as seams create weak points and slight surface "bulges" or "divots", [r
Will attempt to align the seam to a hidden internal facet of the model.
-
+
### Aligned Back
@@ -50,26 +50,26 @@ Combines [Aligned](#aligned) and [Back](#back) strategies by prioritizing seam p
This is particularly useful for directional models like sculptures or figurines that have a clear front view.
Unlike "Back" which always places seams at the rearmost position, "Aligned Back" uses intelligent positioning that avoids the front while maintaining sophisticated seam hiding capabilities.
-
+
### Nearest
Will place the seam at the nearest starting point compared to where the nozzle stopped printing in the previous layer.
This is optimized for speed, low travel, and acceptable strength.
-
+
### Back
This option places the seam on the back side (Min Y point in that layer) of the object, away from the view. It is useful for objects that will be displayed with a specific orientation.
-
+
### Random
This option places the seam randomly across the object, which can help to distribute the seam points and increase the overall strength of the print.
-
+
## Modifiers
@@ -77,7 +77,7 @@ This option places the seam randomly across the object, which can help to distri
As the seam location forms a weak point in the print, staggering the seam on the internal perimeters can help reduce stress points. This setting moves the start of the internal wall's seam around across layers as well as away from the external perimeter seam. This way, the internal and external seams don't all align at the same point and between them across layers, distributing those weak points further away from the seam location, hence making the part stronger. It can also help improve the water tightness of your model.
-
+
### Seam gap
@@ -88,13 +88,13 @@ Controls the gap in mm or as a percentage of the nozzle size between the two end
For a well-tuned printer with [pressure advance](pressure-advance-calib) and [filament retraction](retraction-calib), a value of **0-15%** is typically optimal.
-
+
### Scarf joint seam
Adjusts the extrusion flow rate at seam points to create a smooth overlap between the start and end of each loop, minimizing visible defects.
-
+
Advantages:
@@ -169,9 +169,9 @@ If role-based wipe speed is disabled, set this field to the absolute wipe speed
When finishing printing a "loop" (i.e., an extrusion that starts and ends at the same point), move the nozzle slightly inwards towards the part. That move aims to reduce seam unevenness by tucking in the end of the seam to the part. It also slightly cleans the nozzle before traveling to the next area of the model, reducing stringing.
This setting will use your printer/material Wipe Distance and retract amount before wipe values.
-
+
-
+
### Wipe Before External
@@ -197,7 +197,7 @@ There are several factors that influence how clean the seam of your model is, wi
However, due to mechanical and material tolerances, as well as the very nature of 3D printing with FFF, that is not always possible. Hopefully with some tuning you'll be able to achieve prints like this!
-
+
### Troubleshooting the Start of a Seam
diff --git a/doc/print_settings/quality/quality_settings_wall_and_surfaces.md b/doc/print_settings/quality/quality_settings_wall_and_surfaces.md
index fce72eff22..5ff7f29431 100644
--- a/doc/print_settings/quality/quality_settings_wall_and_surfaces.md
+++ b/doc/print_settings/quality/quality_settings_wall_and_surfaces.md
@@ -22,29 +22,29 @@ Print sequence of the internal (inner) and external (outer) walls.
Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighboring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.
-
+
### Inner/Outer/Inner
Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.
-
+
### Outer/Inner
Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of [Inner/Outer/Inner](#innerouterinner) option. However, the z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.
-
+
### Print infill first
When this option is enabled, the [infill](strength_settings_infill) and [top/bottom shells](strength_settings_top_bottom_shells) are printed first, followed by the walls. This can be useful for some overhangs where the infill can support the walls.
-
+
**However**, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part.
-
+
When using this option is recommended to use the [Precise Wall](quality_settings_precision#precise-wall), [Inner/Outer/Inner](#innerouterinner) wall printing order or reduce [Infill/Wall Overlap](strength_settings_infill#infill-wall-overlap) to avoid the infill pushing out the external wall.
@@ -72,14 +72,14 @@ Other flow ratios, such as ratios for the first layer (does not affect brims and
Use only one wall on flat surfaces, to give more space to the [top infill pattern](strength_settings_top_bottom_shells#surface-pattern).
Specially useful in small features, like letters, where the top surface is very small and [concentric pattern](strength_settings_patterns#concentric) from walls would not cover it properly.
-
+
### Threshold
If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters.
This value can be a mm or a % of the perimeter extrusion width.
-
+
> [!WARNING]
> If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts.
@@ -92,7 +92,7 @@ Instead of traveling directly through a wall, the print head will detour around
While this increases print time slightly, the improvement in print qualityβespecially with materials prone to stringing like **PETG** or **TPU**, often justifies the tradeoff.
Highly recommended for detailed or aesthetic prints.
-
+
> [!NOTE]
> This feature is not compatible with Timelapse mode, as it can cause unexpected travel moves.
@@ -114,7 +114,7 @@ Enables adaptive flow control for small infill areas.
This feature helps address extrusion problems that often occur in small regions of solid infill, such as the tops of narrow letters or fine features.
In these cases, standard extrusion flow may be too much for the available space, leading to over-extrusion or poor surface quality.
-
+
It works by dynamically adjusting the extrusion flow based on the length of the extrusion path, ensuring more precise material deposition in small spaces.
@@ -125,7 +125,7 @@ This is a native implementation of @Alexander-T-Moss [Small Area Flow Compensati
The model uses a list of Extrusion Length and Flow Correction Factor value pairs. Each pair defines how much flow should be used for a specific Extrusion Length.
For values between the listed points, the flow is calculated using linear interpolation.
-
+
For example for the following model:
diff --git a/doc/print_settings/quality/quality_settings_wall_generator.md b/doc/print_settings/quality/quality_settings_wall_generator.md
index e464ee5c76..52c76b86fe 100644
--- a/doc/print_settings/quality/quality_settings_wall_generator.md
+++ b/doc/print_settings/quality/quality_settings_wall_generator.md
@@ -18,13 +18,13 @@ The Wall Generator defines how the outer and inner walls (perimeters) of the mod
The Classic wall generator is a simple and reliable method used in many slicers. It creates as many walls as possible (limited by [Wall Loops](strength_settings_walls#wall-loops)) by extruding along the modelβs perimeter using the defined [Line Width](quality_settings_line_width).
This method does not vary extrusion width and is ideal for fast, predictable slicing.
-
+
## Arachne
The Arachne wall generator dynamically adjusts extrusion width to follow the shape of the model more closely. This allows better handling of thin features and smooth transitions between wall counts.
-
+
> [!NOTE]
> [A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling](https://www.sciencedirect.com/science/article/pii/S0010448520301007?via%3Dihub)
diff --git a/doc/print_settings/speed/speed_settings_advanced.md b/doc/print_settings/speed/speed_settings_advanced.md
index d86834d626..1c1b2afb53 100644
--- a/doc/print_settings/speed/speed_settings_advanced.md
+++ b/doc/print_settings/speed/speed_settings_advanced.md
@@ -7,7 +7,7 @@ This happens by reducing the stresses put on the extrusion system as well as red
This feature is especially helpful when printing at high accelerations and large flow rates as the deviations are larger in these cases.
-
+
- [Theory](#theory)
- [Acceleration vs. Extrusion rate smoothing](#acceleration-vs-extrusion-rate-smoothing)
@@ -28,7 +28,7 @@ In summary, **it takes the "edge" off rapid extrusion changes caused by accelera
**The example below shows the artifact that is mitigated by ERS.**
-
+
The bulging visible above is due to the extruder not being able to respond fast enough to the required speed change when printing with high accelerations and high speeds and being requested to slow down for an overhang.
@@ -70,7 +70,7 @@ t = \frac{v_f - v_i}{a}
A printer printing at 200mm/sec with a 0.42 line width and 0.16 layer height would be extruding plastic at approx. 12.16mmΒ³/sec, as can also be seen from the below visual.
-
+
When the printer is extruding at 40mm/sec with the same line width and layer height as above, the flow rate is 2.43mmΒ³/sec.
diff --git a/doc/print_settings/speed/speed_settings_initial_layer_speed.md b/doc/print_settings/speed/speed_settings_initial_layer_speed.md
index fc1a5ed635..05b9da9131 100644
--- a/doc/print_settings/speed/speed_settings_initial_layer_speed.md
+++ b/doc/print_settings/speed/speed_settings_initial_layer_speed.md
@@ -20,4 +20,4 @@ Usually, this is set to 100% of the [travel speed](speed_settings_travel), but i
Specifies how many of the first layers should be printed at a reduced speed. Instead of jumping straight to full speed after the first layer, the speed gradually increases in a linear fashion over this number of layers. This gradual ramp-up helps maintain adhesion and gives the print more stability in its early stages, especially on prints with a small contact area or materials prone to warping.
-
+
diff --git a/doc/print_settings/speed/speed_settings_other_layers_speed.md b/doc/print_settings/speed/speed_settings_other_layers_speed.md
index cca1b32d9a..c29277756d 100644
--- a/doc/print_settings/speed/speed_settings_other_layers_speed.md
+++ b/doc/print_settings/speed/speed_settings_other_layers_speed.md
@@ -40,7 +40,7 @@ Any shape (not only circles) will be considered as a small perimeter.
If expressed as percentage (for example: 80%) it will be calculated on the [outer wall speed](#outer-wall).
> [!NOTE]
-> Zero will use [50%](https://github.com/SoftFever/OrcaSlicer/blob/7d2a12aa3cbf2e7ca5d0523446bf1d1d4717f8d1/src/libslic3r/GCode.cpp#L4698) of [outer wall speed](#outer-wall).
+> Zero will use [50%](https://github.com/OrcaSlicer/OrcaSlicer/blob/7d2a12aa3cbf2e7ca5d0523446bf1d1d4717f8d1/src/libslic3r/GCode.cpp#L4698) of [outer wall speed](#outer-wall).
### Small perimeters threshold
diff --git a/doc/print_settings/speed/speed_settings_overhang_speed.md b/doc/print_settings/speed/speed_settings_overhang_speed.md
index 41dd8829c3..b2a23a0230 100644
--- a/doc/print_settings/speed/speed_settings_overhang_speed.md
+++ b/doc/print_settings/speed/speed_settings_overhang_speed.md
@@ -14,7 +14,7 @@ This can help improve print quality and reduce issues like stringing or sagging.
Enable this option to slow down printing in areas where perimeters may have curled upwards. For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.
-
+
It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. If you notice artifacts, ensure your pressure advance is tuned correctly.
diff --git a/doc/print_settings/speed/speed_settings_travel.md b/doc/print_settings/speed/speed_settings_travel.md
index d3411db24a..f2f170f513 100644
--- a/doc/print_settings/speed/speed_settings_travel.md
+++ b/doc/print_settings/speed/speed_settings_travel.md
@@ -1,6 +1,6 @@
# Travel
-
+
Travel speed is the speed at which the print head moves when not extruding filament.
This speed is typically faster than the printing speed, as there is no need to carefully place material. However, setting the travel speed too high can lead to issues such as missed steps or ringing artifacts.
diff --git a/doc/print_settings/strength/strength_settings_advanced.md b/doc/print_settings/strength/strength_settings_advanced.md
index 461f998c44..e20e534fb5 100644
--- a/doc/print_settings/strength/strength_settings_advanced.md
+++ b/doc/print_settings/strength/strength_settings_advanced.md
@@ -13,7 +13,7 @@
Aligns infill and surface fill directions to follow the model's orientation on the build plate.
When enabled, fill directions rotate with the model to maintain optimal characteristics.
-
+
## Bridge infill direction
@@ -30,7 +30,7 @@ This setting helps to ensure that small areas of sparse infill do not compromise
Automatically combine [sparse infill](strength_settings_infill) of several layers so they print together and reduce print time and while increasing strength. While walls are still printed with the original [layer height](quality_settings_layer_height).
-
+
### Max layer height
diff --git a/doc/print_settings/strength/strength_settings_infill.md b/doc/print_settings/strength/strength_settings_infill.md
index 78c0ae54a4..b0bca4113c 100644
--- a/doc/print_settings/strength/strength_settings_infill.md
+++ b/doc/print_settings/strength/strength_settings_infill.md
@@ -37,7 +37,7 @@ Infill density determines the amount of material used to fill the interior of a
This setting allows you to generate your selected [infill pattern](#sparse-infill-pattern) using multiple parallel lines while preserving both the defined [infill density](#sparse-infill-density) and the overall material usage.
-
+
> [!NOTE]
> Orca's approach is different from other slicers that simply multiply the number of lines and material usage, generating a denser infill than expected.
@@ -62,12 +62,12 @@ This setting allows you to generate your selected [infill pattern](#sparse-infil
- **Fire-retardant applications:** Some flame-resistant materials (like PolyMax PC-FR) require a minimum printed wall/infill thicknessβoften 1.5β3β―mmβto comply with standards. Since infill contributes to overall part thickness, using multiple lines helps achieve the necessary thickness without switching to a large nozzle or printing with 100% infill. This is especially useful for high-temperature materials like PC, which are prone to warping when fully solid.
- Creating **aesthetic** infill patterns (like [Grid](strength_settings_patterns#grid) or [Honeycomb](strength_settings_patterns#honeycomb)) with multiple line widthsβwithout relying on CAD modeling or being limited to a single extrusion width.
-
+
> [!WARNING]
> For self intersecting infills (e.g. [Cubic](strength_settings_patterns#cubic), [Grid](strength_settings_patterns#grid)) multiline count greater than 3 may cause layer shift, extruder clog or other issues due to overlapping of lines on intersection points.
>
-> 
+> 
## Direction and Rotation
@@ -78,7 +78,7 @@ This setting allows you to generate your selected [infill pattern](#sparse-infil
Controls the direction of the infill lines to optimize or strengthen the print.
-
+
### Rotation
@@ -91,7 +91,7 @@ For example:
0,90
```
-
+
The first layer uses 0Β°, the second uses 90Β°, and the pattern repeats for subsequent layers.
@@ -117,11 +117,11 @@ Infill area is enlarged slightly to overlap with wall for better bonding. The pe
- **Infill Wall Overlap Off**
-
+
- **Infill Wall Overlap On**
-
+
## Apply gap fill
@@ -151,11 +151,11 @@ OrcaSlicer tries to connect two close infill lines to a short perimeter segment.
- **Anchor Off**
-
+
- **Anchor On**
-
+
## Internal Solid Infill
Line pattern of internal solid infill. If the [detect narrow internal solid infill](strength_settings_advanced#detect-narrow-internal-solid-infill) be enabled, the [concentric pattern](strength_settings_patterns#concentric) will be used for the small area.
@@ -165,7 +165,7 @@ Line pattern of internal solid infill. If the [detect narrow internal solid infi
Insert extra solid infills at specific layers to add strength at critical points in your print. This feature allows you to strategically reinforce your part without changing the overall sparse infill density.
-
+
The pattern supports two formats:
diff --git a/doc/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md b/doc/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
index e3b61a9c5e..7ecc608652 100644
--- a/doc/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
+++ b/doc/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
@@ -65,48 +65,48 @@ This metalanguage provides a way to define the [direction and rotation](strength
`[joint sign]` - the symbol which determines the method of connection for turning of the infill:
- `/` - linear displacement of the infill. e.g. `+22.5/50%`
- 
+ 
- `#` - infill of multiple layers with vertical displacement at finish angle. e.g. `+22.5#50%`
- 
+ 
- `#-` - infill of multiple layers with vertical displacement at initial angle. e.g. `+22.5#-50%`
- 
+ 
- `|` - infill of multiple layers with vertical displacement at middle angle. e.g. `+22.5|50%`
- 
+ 
- `N` - infill formed by sinus function (vertical connection). e.g. `+22.5N50%`
- 
+ 
- `n` - infill formed by sinus function (vertical connection, lazy). e.g. `+22.5n50%`
- 
+ 
- `Z` - infill formed by sinus function (horizontal connection). e.g. `+22.5Z50%`
- 
+ 
- `z` - infill formed by sinus function (horizontal connection, lazy). e.g. `+22.5z50%`
- 
+ 
- `L` - infill formed by quarter of circle (horizontal to vertical connection). e.g. `+22.5L50%`
- 
+ 
- `l` - infill formed by quarter of circle (vertical to horizontal connection). e.g. `+22.5l50%`
- 
+ 
- `U` - infill formed by squared function. e.g. `+22.5U50%`
- 
+ 
- `u-` - infill formed by squared function (inverse). e.g. `+22.5u-50%`
- 
+ 
- `Q` - infill formed by cubic function. e.g. `+22.5Q50%`
- 
+ 
- `q-` - infill formed by cubic function (inverse). e.g. `+22.5q-50%`
- 
+ 
- `$` - infill formed by arcsinus method. e.g. `+22.5$50%`
- 
+ 
- `~` - infill formed with random angle. e.g. `+22.5~50%`
- 
+ 
- `^` - infill formed with pseudorandom angle. e.g. `+22.5^50%`
- 
+ 
### Counting
`[-]β` - counting the distance at which the turn will take place:
- `β` - the count will take place by β layers. e.g. `+22.5/50%`
- 
+ 
- `-β` - indicates that the joint form will be flipped upward. e.g. `+22.5/-50%`
- 
+ 
- `B` - the count will take place over the next layers equal to the bottom_shell_layers parameter
- `T` - the count will take place over the next layers equal to the top_shell_layers parameter
@@ -136,31 +136,31 @@ They include a simple definition of the angle for each layer. Note that the init
- `0`, `15`, `45.5`, `256.5605`... - just fill at the existing angle. The initial direction starts at the X-axis, and the acceptable range of values is from 0 to 360
- `0` as well as `+0`, `-0` or just empty template
- 
+ 
- `45`
- 
+ 
- `0, 30` - is a simple alternation through each layer in the direction of 0 and 30 degrees.
- 
+ 
- `0%`, `10%`, `25%`, `100%`... - infill angle determined from relative terms from a full turn of 360 degree rotation. Rotate by 0, 36, 90, and 0 degrees.
- `25%` - the equivalent of `90` instruction.
- 
+ 
- `30, 60, 90, 120, 150, 0` - a more complex command defines a turn every layer at 30 degrees. At the end of the template line, the next instruction is read first, and this process continues until the entire height of the model is filled.
### Relative instructions
- `+30` - this is a short instruction for counterclockwise rotation. The equivalent of `30, 60, 90, 120, 150, 180, 210, 240, 270, 300, 330, 0` or `30, 60, 90, 120, 150, 0` instruction.
- 
+ 
- `-30` - this is the same instruction, but with clockwise rotation. The equivalent of `330, 300, 270, 240, 210, 180, 150, 120, 90, 60, 30, 0` or `330, 300, 270, 240, 210, 0` instruction.
- `+150` - you can specify a different multiple of the irrational angle for better fill dispersion = `150, 300, 90, 240, 30, 180, 330, 120, 270, 60, 210, 0` ...
- `+45` - The equivalent of `45, 90, 135, 180, 225, 270, 315, 0` or `45, 90, 135, 0` instruction.
- 
+ 
- `+90` - The equivalent of `90, 180, 270, 0` or `90, 0` instruction.
- 
+ 
- `+15%` - useful for dividing angles on a decimal basis = `54, 108, 162, 270, 324, 18, 72, 126, 180, 234, 288, 342, 36, 90, 144, 196, 252, 306, 0` ...
- `+30, +90` - a complex instruction setting the rotation of each layer in these positions = `30, 120, 150, 240, 270, 0` ...
- 
+ 
- `0, +30, +90` - a complex instruction setting the rotation of each layer in these positions = `0, 30, 120` ...
- 
+ 
### Repetitive, adjusting and one-time instructions
@@ -183,9 +183,9 @@ If there is a `-` sign before the numeric value, then the initial fill angle cha
It is important to know that this will not be the exact length, but will be tied to the nearest layer from below.
- `+45/100` - rotate the next 100 layers linearly at a 45 degree angle. For this model, this instruction is equivalent to `+45/100%` as it contains 100 layers.
- 
+ 
- When changing the height of the instruction `+45/50` or `+45/50%` - the final angle will be 90, as the turn will occur twice.
- 
+ 
- `-50%Z1cm` - rotate one centimeter of infill by sinus function at a 180 degree CW.
### Constant layer number instructions
@@ -200,11 +200,11 @@ There are 2 letter signs `T` and `B` that can determine the number of shell laye
## Complex template examples
- `+10L25%, -10l25%, -10L25%, +10l25%` - fill the model with sine period with 10 degree amplitude
- 
+ 
- `+30/-10#` - rotate the infill at height of 10 standard layers (or @ standard layer height is 0.2mm x 10 = 2mm) inverse linearly at a 30 degree angle.
- 
+ 
- `+360~100%` or `+100%~100%` - fill the model with infill with random direction at each layer.
- 
+ 
## Credits
diff --git a/doc/print_settings/strength/strength_settings_patterns.md b/doc/print_settings/strength/strength_settings_patterns.md
index 94c1a243d3..9e5a24f777 100644
--- a/doc/print_settings/strength/strength_settings_patterns.md
+++ b/doc/print_settings/strength/strength_settings_patterns.md
@@ -33,49 +33,49 @@ Some patterns may complete faster due to more efficient use of the print head's
Layer time variability refers to the differences in time it takes to print each layer of a pattern. Some patterns may have consistent layer times, while others may experience significant fluctuations. These variations can potentially impact the outer appearance of the print due to differences in cooling and material flow between layers.
-
+
## Patterns Quick Reference
| - | Pattern | Strength | Material Usage | Print Time | Layer time Variability |
|---|---|---|---|---|---|
-| 
| [Monotonic](#monotonic) | X-Y: βͺοΈ Normal
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Monotonic line](#monotonic-line) | X-Y: βͺοΈ Normal
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Rectilinear](#rectilinear) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Aligned Rectilinear](#aligned-rectilinear) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Zig Zag](#zig-zag) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Cross Zag](#cross-zag) | X-Y: βͺοΈ Normal
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Locked Zag](#locked-zag) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal-Low | βͺοΈ Normal-High | βͺοΈ Normal-High | π’ None |
-| 
| [Line](#line) | X-Y: π‘ Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Grid](#grid) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π£ Low | π’ None |
-| 
| [Triangles](#triangles) | X-Y: π£ High
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Tri-hexagon](#tri-hexagon) | X-Y: π£ High
Z: π Normal-High | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Cubic](#cubic) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Adaptive Cubic](#adaptive-cubic) | X-Y: π Normal-High
Z: π Normal-High | π£ Low | π£ Low | π΅ Unnoticeable |
-| 
| [Quarter Cubic](#quarter-cubic) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Support Cubic](#support-cubic) | X-Y: π‘ Low
Z: π‘ Low | π΅ Extra-Low | π΅ Extra-Low | π΄ Likely Noticeable |
-| 
| [Lightning](#lightning) | X-Y: π‘ Low
Z: π‘ Low | π’ Ultra-Low | π’ Ultra-Low | π΄ Likely Noticeable |
-| 
| [Honeycomb](#honeycomb) | X-Y: π£ High
Z: π£ High | π‘ High | π΄ Ultra-High | π’ None |
-| 
| [3D Honeycomb](#3d-honeycomb) | X-Y: π Normal-High
Z: π Normal-High | π Normal-Low | π Extra-High | π‘ Possibly Noticeable |
-| 
| [Lateral Honeycomb](#lateral-honeycomb) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal-Low | βͺοΈ Normal | π Normal-Low | π‘ Possibly Noticeable |
-| 
| [Lateral Lattice](#lateral-lattice) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
-| 
| [Cross Hatch](#cross-hatch) | X-Y: π Normal-High
Z: π Normal-High | βͺοΈ Normal | π‘ High | π΄ Likely Noticeable |
-| 
| [TPMS-D](#tpms-d) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π‘ High | π‘ Possibly Noticeable |
-| 
| [TPMS-FK](#tpms-fk) | X-Y: π Normal-High
Z: π Normal-High | βͺοΈ Normal | π΄ Ultra-High | π‘ Possibly Noticeable |
-| 
| [Gyroid](#gyroid) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π΄ Ultra-High | π΅ Unnoticeable |
-| 
| [Concentric](#concentric) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Hilbert Curve](#hilbert-curve) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Extra-High | π’ None |
-| 
| [Archimedean Chords](#archimedean-chords) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
-| 
| [Octagram Spiral](#octagram-spiral) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | βͺοΈ Normal | π’ None |
+| 
| [Monotonic](#monotonic) | X-Y: βͺοΈ Normal
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Monotonic line](#monotonic-line) | X-Y: βͺοΈ Normal
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Rectilinear](#rectilinear) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Aligned Rectilinear](#aligned-rectilinear) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Zig Zag](#zig-zag) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Cross Zag](#cross-zag) | X-Y: βͺοΈ Normal
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Locked Zag](#locked-zag) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal-Low | βͺοΈ Normal-High | βͺοΈ Normal-High | π’ None |
+| 
| [Line](#line) | X-Y: π‘ Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Grid](#grid) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π£ Low | π’ None |
+| 
| [Triangles](#triangles) | X-Y: π£ High
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Tri-hexagon](#tri-hexagon) | X-Y: π£ High
Z: π Normal-High | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Cubic](#cubic) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Adaptive Cubic](#adaptive-cubic) | X-Y: π Normal-High
Z: π Normal-High | π£ Low | π£ Low | π΅ Unnoticeable |
+| 
| [Quarter Cubic](#quarter-cubic) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Support Cubic](#support-cubic) | X-Y: π‘ Low
Z: π‘ Low | π΅ Extra-Low | π΅ Extra-Low | π΄ Likely Noticeable |
+| 
| [Lightning](#lightning) | X-Y: π‘ Low
Z: π‘ Low | π’ Ultra-Low | π’ Ultra-Low | π΄ Likely Noticeable |
+| 
| [Honeycomb](#honeycomb) | X-Y: π£ High
Z: π£ High | π‘ High | π΄ Ultra-High | π’ None |
+| 
| [3D Honeycomb](#3d-honeycomb) | X-Y: π Normal-High
Z: π Normal-High | π Normal-Low | π Extra-High | π‘ Possibly Noticeable |
+| 
| [Lateral Honeycomb](#lateral-honeycomb) | X-Y: βͺοΈ Normal-Low
Z: βͺοΈ Normal-Low | βͺοΈ Normal | π Normal-Low | π‘ Possibly Noticeable |
+| 
| [Lateral Lattice](#lateral-lattice) | X-Y: βͺοΈ Normal-Low
Z: π‘ Low | βͺοΈ Normal | π Normal-Low | π΅ Unnoticeable |
+| 
| [Cross Hatch](#cross-hatch) | X-Y: π Normal-High
Z: π Normal-High | βͺοΈ Normal | π‘ High | π΄ Likely Noticeable |
+| 
| [TPMS-D](#tpms-d) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π‘ High | π‘ Possibly Noticeable |
+| 
| [TPMS-FK](#tpms-fk) | X-Y: π Normal-High
Z: π Normal-High | βͺοΈ Normal | π΄ Ultra-High | π‘ Possibly Noticeable |
+| 
| [Gyroid](#gyroid) | X-Y: π£ High
Z: π£ High | βͺοΈ Normal | π΄ Ultra-High | π΅ Unnoticeable |
+| 
| [Concentric](#concentric) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Hilbert Curve](#hilbert-curve) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Extra-High | π’ None |
+| 
| [Archimedean Chords](#archimedean-chords) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | π Normal-Low | π’ None |
+| 
| [Octagram Spiral](#octagram-spiral) | X-Y: π‘ Low
Z: βͺοΈ Normal | βͺοΈ Normal | βͺοΈ Normal | π’ None |
> [!NOTE]
> This estimations are based in a Cube model to maintain consistency.
> This **WILL NOT** be the same for all models and only serves as a standard guideline.
> [!TIP]
-> You can see how this analysis was made in [infill-analysis](https://github.com/SoftFever/OrcaSlicer/tree/main/doc/print_settings/strength/infill-analysis) folder:
-> - [Infill calculator Project](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/print_settings/strength/infill-analysis/infill_calculator.3mf?raw=true) to generate the gcode files and images.
-> - [infill_desc_calculator.xlsx](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/print_settings/strength/infill-analysis/infill_desc_calculator.xlsx?raw=true) used to calculate the values above.
+> You can see how this analysis was made in [infill-analysis](https://github.com/OrcaSlicer/OrcaSlicer/tree/main/doc/print_settings/strength/infill-analysis) folder:
+> - [Infill calculator Project](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/doc/print_settings/strength/infill-analysis/infill_calculator.3mf?raw=true) to generate the gcode files and images.
+> - [infill_desc_calculator.xlsx](https://github.com/OrcaSlicer/OrcaSlicer/blob/main/doc/print_settings/strength/infill-analysis/infill_desc_calculator.xlsx?raw=true) used to calculate the values above.
> - Time, and material usage where simulated with the same [Klipper Estimator](https://github.com/Annex-Engineering/klipper_estimator) values to maintain consistency.
## Monotonic
@@ -94,7 +94,7 @@ Layer time variability refers to the differences in time it takes to print each
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
## Monotonic line
@@ -112,7 +112,7 @@ Layer time variability refers to the differences in time it takes to print each
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
## Rectilinear
@@ -132,7 +132,7 @@ Parallel lines spaced according to infill density. Each layer is printed perpend
- **[Surface](strength_settings_top_bottom_shells)**
- **[Ironing](quality_settings_ironing)**
-
+
## Aligned Rectilinear
@@ -152,7 +152,7 @@ Recommended with layer anchoring to improve not perpendicular strength.
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
## Zig Zag
@@ -169,7 +169,7 @@ Similar to [rectilinear](#rectilinear) with consistent pattern between layers. A
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Cross Zag
@@ -186,7 +186,7 @@ Similar to [Zig Zag](#zig-zag) but displacing each layer with Infill shift step
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Locked Zag
@@ -205,7 +205,7 @@ Skin density * ( Infill Area - Skin Area + lock depth area) + ( Skin density * S
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Line
@@ -222,7 +222,7 @@ Similar to [rectilinear](#rectilinear), but each line is slightly rotated to imp
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Grid
@@ -239,7 +239,7 @@ Two-layer pattern of perpendicular lines, forming a grid. Overlapping points may
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Triangles
@@ -256,7 +256,7 @@ Triangle-based grid, offering strong X-Y strength but with triple overlaps at in
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Tri-hexagon
@@ -273,7 +273,7 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Cubic
@@ -290,7 +290,7 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Adaptive Cubic
@@ -307,7 +307,7 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Quarter Cubic
@@ -324,7 +324,7 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Support Cubic
@@ -341,7 +341,7 @@ Support |Cubic is a variation of the [Cubic](#cubic) infill pattern that is spec
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Lightning
@@ -358,7 +358,7 @@ Ultra-fast, ultra-low material infill. Designed for speed and efficiency, ideal
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Honeycomb
@@ -375,7 +375,7 @@ Hexagonal pattern balancing strength and material use. Double walls in each hexa
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## 3D Honeycomb
@@ -392,7 +392,7 @@ This infill tries to generate a printable honeycomb structure by printing square
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Lateral Honeycomb
@@ -409,7 +409,7 @@ Vertical Honeycomb pattern. Acceptable torsional stiffness. Developed for low de
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Lateral Lattice
@@ -426,7 +426,7 @@ Low-strength pattern with good flexibility. You can adjust **Angle 1** and **Ang
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Cross Hatch
@@ -444,7 +444,7 @@ Easier to slice but consider using [TPMS-D](#tpms-d) or [Gyroid](#gyroid) for be
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## TPMS-D
@@ -461,7 +461,7 @@ Triply Periodic Minimal Surface (Schwarz Diamond). Hybrid between [Cross Hatch](
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## TPMS-FK
@@ -478,7 +478,7 @@ Triply Periodic Minimal Surface (FischerβKoch S) pattern. Its smooth, continuo
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Gyroid
@@ -495,7 +495,7 @@ Mathematical, isotropic surface providing equal strength in all directions. Exce
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
-
+
## Concentric
@@ -515,7 +515,7 @@ Fills the area with progressively smaller versions of the outer contour, creatin
- **[Surface](strength_settings_top_bottom_shells)**
- **[Ironing](quality_settings_ironing)**
-
+
## Hilbert Curve
@@ -535,7 +535,7 @@ Print speed is very low due to the complexity of the path, which can lead to lon
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
## Archimedean Chords
@@ -554,7 +554,7 @@ Spiral pattern that fills the area with concentric arcs, creating a smooth and c
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
## Octagram Spiral
@@ -573,4 +573,4 @@ Aesthetic pattern with low strength and high print time.
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
-
+
diff --git a/doc/print_settings/strength/strength_settings_top_bottom_shells.md b/doc/print_settings/strength/strength_settings_top_bottom_shells.md
index a4c8885243..674fa94b8f 100644
--- a/doc/print_settings/strength/strength_settings_top_bottom_shells.md
+++ b/doc/print_settings/strength/strength_settings_top_bottom_shells.md
@@ -2,7 +2,7 @@
Controls how the top and bottom solid layers (shells) are generated.
-
+
## Shell Layers
diff --git a/doc/print_settings/strength/strength_settings_walls.md b/doc/print_settings/strength/strength_settings_walls.md
index badfcde8d1..a2ffcb1ee0 100644
--- a/doc/print_settings/strength/strength_settings_walls.md
+++ b/doc/print_settings/strength/strength_settings_walls.md
@@ -3,7 +3,7 @@
In 3D printing, "walls" refer to the outer layers of a printed object that provide its shape and structural integrity.
Adjusting wall settings can significantly affect layer adhesion, strength, appearance and print time of your model.
-
+
- [Wall loops](#wall-loops)
- [Alternate extra wall](#alternate-extra-wall)
@@ -39,7 +39,7 @@ Thin walls printed this way may have reduced surface quality and strength becaus
> Usually, it is recommended to use [Arachne wall generator](quality_settings_wall_generator#arachne) which will disable "Detect thin walls" because it uses a different approach to wall generation.
- In small details it can generate details that wouldn't be possible with traditional wall generation methods.
- 
- 
+ 
+ 
- In large prints, it can generate defects more easily due to the reduced wall thickness.
- 
+ 
diff --git a/doc/printer_settings/Chamber-temperature.md b/doc/printer_settings/Chamber-temperature.md
index 52b81d7aa8..c8be8da497 100644
--- a/doc/printer_settings/Chamber-temperature.md
+++ b/doc/printer_settings/Chamber-temperature.md
@@ -4,8 +4,8 @@ OrcaSlicer use `M141/M191` command to control active chamber heater.
If your Filament's `Activate temperature control` and your printer `Support control chamber temperature` option are checked , OrcaSlicer will insert `M191` command at the beginning of the gcode (before `Machine G-code`).
-
-
+
+
> [!NOTE]
diff --git a/doc/printer_settings/adaptive-bed-mesh.md b/doc/printer_settings/adaptive-bed-mesh.md
index 2f8f7f3928..e964824f0d 100644
--- a/doc/printer_settings/adaptive-bed-mesh.md
+++ b/doc/printer_settings/adaptive-bed-mesh.md
@@ -6,7 +6,7 @@ This feature allows users to seamlessly integrate adaptive bed mesh commands wit
The implementation is designed to be straightforward, requiring no additional plugins or alterations to firmware settings, thereby enhancing user experience and print quality directly from OrcaSlicer.
-
+
## Settings in OrcaSlicer
@@ -54,4 +54,4 @@ BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]
M557 X{adaptive_bed_mesh_min[0]}:{adaptive_bed_mesh_max[0]} Y{adaptive_bed_mesh_min[1]}:{adaptive_bed_mesh_max[1]} P{bed_mesh_probe_count[0]}:{bed_mesh_probe_count[1]}
```
-
+
diff --git a/doc/printer_settings/bed-types.md b/doc/printer_settings/bed-types.md
index 73b18e6fa0..eb079689d5 100644
--- a/doc/printer_settings/bed-types.md
+++ b/doc/printer_settings/bed-types.md
@@ -5,7 +5,7 @@ You can enable it in printer settings.
Once enabled, you can select the bed type in the drop-down menu, corresponding bed temperature will be set automatically.
You can set the bed temperature for each bed type in the filament settings as demonstrated in the following image.
-
+
Orca also support `curr_bed_type` variable in custom G-code.
For example, the following sample G-codes can detect the selected bed type and adjust the G-code offset accordingly for Klipper:
diff --git a/resources/data/hints.ini b/resources/data/hints.ini
index f4edae1265..27e6da9e24 100644
--- a/resources/data/hints.ini
+++ b/resources/data/hints.ini
@@ -64,26 +64,26 @@
[hint:Precise wall]
text = Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?
-documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision
+documentation_link = https://github.com/OrcaSlicer/OrcaSlicer/wiki/quality_settings_precision
[hint:Sandwich mode]
text = Sandwich mode\nDid you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?
[hint:Chamber temperature]
text = Chamber temperature\nDid you know that OrcaSlicer supports chamber temperature?
-documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/Chamber-temperature
+documentation_link = https://github.com/OrcaSlicer/OrcaSlicer/wiki/Chamber-temperature
[hint:Calibration]
text = Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer.
-documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/Calibration
+documentation_link = https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration
[hint:Auxiliary fan]
text = Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooling fan?
-documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/Auxiliary-fan
+documentation_link = https://github.com/OrcaSlicer/OrcaSlicer/wiki/Auxiliary-fan
[hint:Air filtration]
text = Air filtration/Exhaust Fan\nDid you know that OrcaSlicer can support Air filtration/Exhaust Fan?
-documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/air-filtration
+documentation_link = https://github.com/OrcaSlicer/OrcaSlicer/wiki/air-filtration
[hint:G-code window]
text = G-code window\nYou can turn on/off the G-code window by pressing the C key.
diff --git a/scripts/flatpak/io.github.softfever.OrcaSlicer.metainfo.xml b/scripts/flatpak/io.github.softfever.OrcaSlicer.metainfo.xml
index 4c04ff99a0..d5763f8f35 100755
--- a/scripts/flatpak/io.github.softfever.OrcaSlicer.metainfo.xml
+++ b/scripts/flatpak/io.github.softfever.OrcaSlicer.metainfo.xml
@@ -10,9 +10,9 @@
... seriously though, thanks -->
Get even more perfect prints!
SoftFever
- https://github.com/SoftFever/OrcaSlicer
- https://github.com/SoftFever/OrcaSlicer/wiki
- https://github.com/SoftFever/OrcaSlicer/issues/
+ https://github.com/OrcaSlicer/OrcaSlicer
+ https://github.com/OrcaSlicer/OrcaSlicer/wiki
+ https://github.com/OrcaSlicer/OrcaSlicer/issues/
https://ko-fi.com/SoftFever
0BSD
AGPL-3.0-only
@@ -42,7 +42,7 @@
#009688
- https://github.com/SoftFever/OrcaSlicer/commit/951fc8e98a0d5ca0ccb254315646ce7889a44836
+ https://github.com/OrcaSlicer/OrcaSlicer/commit/951fc8e98a0d5ca0ccb254315646ce7889a44836
diff --git a/scripts/run_unit_tests.sh b/scripts/run_unit_tests.sh
index 254221dd64..315c14b594 100755
--- a/scripts/run_unit_tests.sh
+++ b/scripts/run_unit_tests.sh
@@ -9,5 +9,5 @@ ROOT_DIR="$(dirname "$0")/.."
cd "${ROOT_DIR}" || exit 1
-# TODO: github.com/SoftFever/OrcaSlicer/issues/10309 - Run all tests
+# TODO: github.com/OrcaSlicer/OrcaSlicer/issues/10309 - Run all tests
ctest --test-dir build/tests/slic3rutils --output-junit "$(pwd)/ctest_results.xml" --output-on-failure
diff --git a/src/dev-utils/platform/unix/build_linux_image.sh.in b/src/dev-utils/platform/unix/build_linux_image.sh.in
index ad1b492b7b..810701dccc 100755
--- a/src/dev-utils/platform/unix/build_linux_image.sh.in
+++ b/src/dev-utils/platform/unix/build_linux_image.sh.in
@@ -82,7 +82,7 @@ EOF
chmod ug+x @SLIC3R_APP_CMD@
cp -fl @SLIC3R_APP_CMD@ package/@SLIC3R_APP_CMD@
# Nothing uses this tar? Remove if nobody has complained and it's been a while since this comment added.
- # Original commit was https://github.com/SoftFever/OrcaSlicer/commit/f5a4862da52fc68f77b5201ddf330a9800d83228
+ # Original commit was https://github.com/OrcaSlicer/OrcaSlicer/commit/f5a4862da52fc68f77b5201ddf330a9800d83228
# and it doesn't appear to have been used there either.
#pushd package > /dev/null
#tar -cvf ../@SLIC3R_APP_KEY@.tar . &>/dev/null
diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp
index c53d3a0f9a..2321858d8b 100644
--- a/src/libslic3r/GCodeWriter.cpp
+++ b/src/libslic3r/GCodeWriter.cpp
@@ -992,7 +992,7 @@ void GCodeWriter::add_object_end_labels(std::string& gcode)
m_gcode_label_objects_end = "";
// Orca: reset E so that e value remain correct after skipping the object
- // ref to: https://github.com/SoftFever/OrcaSlicer/pull/205/commits/7f1fe0bd544077626080aa1a9a0576aa735da1a4#r1083470162
+ // ref to: https://github.com/OrcaSlicer/OrcaSlicer/pull/205/commits/7f1fe0bd544077626080aa1a9a0576aa735da1a4#r1083470162
if (!this->config.use_relative_e_distances)
gcode += reset_e(true);
}
diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp
index fe2847baee..cc055c9d8a 100644
--- a/src/libslic3r/PerimeterGenerator.cpp
+++ b/src/libslic3r/PerimeterGenerator.cpp
@@ -159,7 +159,7 @@ static ExtrusionEntityCollection traverse_loops(const PerimeterGenerator &perime
BoundingBox bbox(polygon.points);
bbox.offset(SCALED_EPSILON);
- // Always reverse extrusion if use fuzzy skin: https://github.com/SoftFever/OrcaSlicer/pull/2413#issuecomment-1769735357
+ // Always reverse extrusion if use fuzzy skin: https://github.com/OrcaSlicer/OrcaSlicer/pull/2413#issuecomment-1769735357
if (overhangs_reverse && perimeter_generator.has_fuzzy_skin) {
if (loop.is_contour) {
steep_overhang_contour = true;
@@ -406,7 +406,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
extrusion_paths_append(paths, clip_extrusion(extrusion_path, lower_slices_paths, ClipperLib_Z::ctIntersection), role,
is_external ? perimeter_generator.ext_perimeter_flow : perimeter_generator.perimeter_flow);
- // Always reverse extrusion if use fuzzy skin: https://github.com/SoftFever/OrcaSlicer/pull/2413#issuecomment-1769735357
+ // Always reverse extrusion if use fuzzy skin: https://github.com/OrcaSlicer/OrcaSlicer/pull/2413#issuecomment-1769735357
if (overhangs_reverse && perimeter_generator.has_fuzzy_skin) {
if (pg_extrusion.is_contour) {
steep_overhang_contour = true;
diff --git a/src/slic3r/GUI/AboutDialog.cpp b/src/slic3r/GUI/AboutDialog.cpp
index 06e968631b..72e456426c 100644
--- a/src/slic3r/GUI/AboutDialog.cpp
+++ b/src/slic3r/GUI/AboutDialog.cpp
@@ -332,7 +332,7 @@ AboutDialog::AboutDialog()
(boost::format(
""
""
- "https://github.com/SoftFever/Orcaslicer
"
+ "https://github.com/OrcaSlicer/OrcaSlicer
"
""
"")
).str());
diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp
index 02db33574e..2457914c8a 100644
--- a/src/slic3r/GUI/GLCanvas3D.cpp
+++ b/src/slic3r/GUI/GLCanvas3D.cpp
@@ -1842,7 +1842,7 @@ void GLCanvas3D::enable_picking(bool enable)
// Orca: invalidate hover state when dragging is toggled, otherwise if we turned off dragging
// while hovering above a volume, the hovering state won't update even if mouse has moved away.
- // Fixes https://github.com/SoftFever/OrcaSlicer/pull/9979#issuecomment-3065575889
+ // Fixes https://github.com/OrcaSlicer/OrcaSlicer/pull/9979#issuecomment-3065575889
m_hover_volume_idxs.clear();
}
diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp
index 49c82ce50d..5b5e0bd77a 100644
--- a/src/slic3r/GUI/GUI_ObjectList.cpp
+++ b/src/slic3r/GUI/GUI_ObjectList.cpp
@@ -132,7 +132,7 @@ ObjectList::ObjectList(wxWindow* parent) :
#ifdef __linux__
// Temporary fix for incorrect dark mode application regarding list item's text color.
- // See: https://github.com/SoftFever/OrcaSlicer/issues/2086
+ // See: https://github.com/OrcaSlicer/OrcaSlicer/issues/2086
this->SetForegroundColour(*wxBLACK);
#endif
diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp
index 6d100d8dfd..4db1424807 100644
--- a/src/slic3r/GUI/MainFrame.cpp
+++ b/src/slic3r/GUI/MainFrame.cpp
@@ -2297,7 +2297,7 @@ void MainFrame::on_sys_color_changed()
}
// On macOS, we use system menu bar, which handles the key accelerators automatically and breaks key handling in normal typing
-// See https://github.com/SoftFever/OrcaSlicer/issues/8152
+// See https://github.com/OrcaSlicer/OrcaSlicer/issues/8152
// So we disable some of the accelerators on macOS, by replacing the accelerator seperator to a hyphen.
#ifdef __APPLE__
static const wxString sep = " - ";
@@ -3114,7 +3114,7 @@ void MainFrame::init_menubar_as_editor()
// help
append_menu_item(m_topbar->GetCalibMenu(), wxID_ANY, _L("Tutorial"), _L("Calibration help"),
[this](wxCommandEvent&) {
- std::string url = "https://github.com/SoftFever/OrcaSlicer/wiki/Calibration";
+ std::string url = "https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration";
if (const std::string country_code = wxGetApp().app_config->get_country_code(); country_code == "CN") {
// Use gitee mirror for China users
url = "https://gitee.com/n0isyfox/orca-slicer-docs/wikis/%E6%A0%A1%E5%87%86/%E6%89%93%E5%8D%B0%E5%8F%82%E6%95%B0%E6%A0%A1%E5%87%86";
@@ -3230,7 +3230,7 @@ void MainFrame::init_menubar_as_editor()
[this]() {return m_plater->is_view3D_shown();; }, this);
// help
append_menu_item(calib_menu, wxID_ANY, _L("Tutorial"), _L("Calibration help"),
- [this](wxCommandEvent&) { wxLaunchDefaultBrowser("https://github.com/SoftFever/OrcaSlicer/wiki/Calibration", wxBROWSER_NEW_WINDOW); }, "", nullptr,
+ [this](wxCommandEvent&) { wxLaunchDefaultBrowser("https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration", wxBROWSER_NEW_WINDOW); }, "", nullptr,
[this]() {return m_plater->is_view3D_shown();; }, this);
m_menubar->Append(calib_menu,wxString::Format("&%s", _L("Calibration")));
diff --git a/src/slic3r/GUI/NetworkTestDialog.cpp b/src/slic3r/GUI/NetworkTestDialog.cpp
index 468ab2a71a..f4cca3ea95 100644
--- a/src/slic3r/GUI/NetworkTestDialog.cpp
+++ b/src/slic3r/GUI/NetworkTestDialog.cpp
@@ -248,7 +248,7 @@ void NetworkTestDialog::start_all_job_sequence()
update_status(-1, "start_test_sequence");
start_test_url(TEST_BING_JOB, "Bing", "http://www.bing.com");
if (m_closing) return;
- start_test_url(TEST_ORCA_JOB, "OrcaSlicer(GitHub)", "https://github.com/SoftFever/OrcaSlicer");
+ start_test_url(TEST_ORCA_JOB, "OrcaSlicer(GitHub)", "https://github.com/OrcaSlicer/OrcaSlicer");
if (m_closing) return;
update_status(-1, "end_test_sequence");
});
@@ -306,7 +306,7 @@ void NetworkTestDialog::start_test_github_thread()
if (m_in_testing[TEST_ORCA_JOB])
return;
test_job[TEST_ORCA_JOB] = new boost::thread([this] {
- start_test_url(TEST_ORCA_JOB, "OrcaSlicer(GitHub)", "https://github.com/SoftFever/OrcaSlicer");
+ start_test_url(TEST_ORCA_JOB, "OrcaSlicer(GitHub)", "https://github.com/OrcaSlicer/OrcaSlicer");
});
}
void NetworkTestDialog::start_test_bing_thread()
diff --git a/src/slic3r/GUI/OptionsGroup.cpp b/src/slic3r/GUI/OptionsGroup.cpp
index a319cafab5..3d0318f663 100644
--- a/src/slic3r/GUI/OptionsGroup.cpp
+++ b/src/slic3r/GUI/OptionsGroup.cpp
@@ -1312,7 +1312,7 @@ wxString OptionsGroup::get_url(const std::string& path_end)
str = str.Left(pos) + anchor;
}
// Orca: point to sf wiki for seam parameters
- return wxString::Format(L"https://github.com/SoftFever/OrcaSlicer/wiki/%s", from_u8(path_end));
+ return wxString::Format(L"https://github.com/OrcaSlicer/OrcaSlicer/wiki/%s", from_u8(path_end));
}
diff --git a/src/slic3r/GUI/StepMeshDialog.cpp b/src/slic3r/GUI/StepMeshDialog.cpp
index 685b8e8290..db281a8ebf 100644
--- a/src/slic3r/GUI/StepMeshDialog.cpp
+++ b/src/slic3r/GUI/StepMeshDialog.cpp
@@ -123,7 +123,7 @@ StepMeshDialog::StepMeshDialog(wxWindow* parent, Slic3r::Step& file, double line
tips->SetForegroundColour(StateColor::darkModeColorFor(wxColour(0, 151, 137)));
tips->SetFont(font);
tips->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent& e) {
- wxLaunchDefaultBrowser("https://github.com/SoftFever/OrcaSlicer/wiki/stl-transformation");
+ wxLaunchDefaultBrowser("https://github.com/OrcaSlicer/OrcaSlicer/wiki/stl-transformation");
});
info->Wrap(FromDIP(400));
tips_sizer->Add(info, 0, wxALIGN_LEFT);
diff --git a/src/slic3r/GUI/calib_dlg.cpp b/src/slic3r/GUI/calib_dlg.cpp
index d38e0822f1..8dd338f88e 100644
--- a/src/slic3r/GUI/calib_dlg.cpp
+++ b/src/slic3r/GUI/calib_dlg.cpp
@@ -176,12 +176,12 @@ PA_Calibration_Dlg::PA_Calibration_Dlg(wxWindow* parent, wxWindowID id, Plater*
// Help links
auto help_sizer = new wxBoxSizer(wxVERTICAL);
auto help_link_pa = new wxHyperlinkCtrl(this, wxID_ANY, _L("Pressure Advance Guide"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/pressure-advance-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/pressure-advance-calib");
help_link_pa->SetForegroundColour(wxColour("#1890FF"));
help_sizer->Add(help_link_pa, 0, wxALL, FromDIP(5));
auto help_link_apa = new wxHyperlinkCtrl(this, wxID_ANY, _L("Adaptive Pressure Advance Guide"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/adaptive-pressure-advance-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/adaptive-pressure-advance-calib");
help_link_apa->SetForegroundColour(wxColour("#1890FF"));
help_sizer->Add(help_link_apa, 0, wxALL, FromDIP(5));
@@ -387,7 +387,7 @@ Temp_Calibration_Dlg::Temp_Calibration_Dlg(wxWindow* parent, wxWindowID id, Plat
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Temperature Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/temp-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/temp-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -566,7 +566,7 @@ MaxVolumetricSpeed_Test_Dlg::MaxVolumetricSpeed_Test_Dlg(wxWindow* parent, wxWin
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Volumetric Speed Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/volumetric-speed-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/volumetric-speed-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -672,7 +672,7 @@ VFA_Test_Dlg::VFA_Test_Dlg(wxWindow* parent, wxWindowID id, Plater* plater)
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: VFA"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/vfa-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/vfa-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -779,7 +779,7 @@ Retraction_Test_Dlg::Retraction_Test_Dlg(wxWindow* parent, wxWindowID id, Plater
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Retraction Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/retraction-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/retraction-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -956,7 +956,7 @@ Input_Shaping_Freq_Test_Dlg::Input_Shaping_Freq_Test_Dlg(wxWindow* parent, wxWin
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Input Shaping Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/input-shaping-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/input-shaping-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -1153,7 +1153,7 @@ Input_Shaping_Damp_Test_Dlg::Input_Shaping_Damp_Test_Dlg(wxWindow* parent, wxWin
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Input Shaping Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/input-shaping-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/input-shaping-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));
@@ -1344,7 +1344,7 @@ Cornering_Test_Dlg::Cornering_Test_Dlg(wxWindow* parent, wxWindowID id, Plater*
v_sizer->AddSpacer(FromDIP(5));
auto help_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Wiki Guide: Cornering Calibration"),
- "https://github.com/SoftFever/OrcaSlicer/wiki/cornering-calib");
+ "https://github.com/OrcaSlicer/OrcaSlicer/wiki/cornering-calib");
help_link->SetForegroundColour(wxColour("#1890FF"));
v_sizer->Add(help_link, 0, wxALL, FromDIP(10));