support profile notes

src/libslic3r/Preset.cpp

@@ -765,7 +765,7 @@ static std::vector<std::string> s_Preset_print_options {
      "sparse_infill_acceleration", "internal_solid_infill_acceleration", "tree_support_adaptive_layer_height", "tree_support_auto_brim", 
      "tree_support_brim_width", "gcode_comments", "gcode_label_objects",
      "initial_layer_travel_speed", "exclude_object", "slow_down_layers", "infill_anchor", "infill_anchor_max",
-     "make_overhang_printable", "make_overhang_printable_angle", "make_overhang_printable_hole_size" 
+     "make_overhang_printable", "make_overhang_printable_angle", "make_overhang_printable_hole_size" ,"notes"
 
 };
 
@@ -790,7 +790,7 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_wipe_distance", "additional_cooling_fan_speed",
     "bed_temperature_difference", "nozzle_temperature_range_low", "nozzle_temperature_range_high",
     //SoftFever
-    "enable_pressure_advance", "pressure_advance","chamber_temperature", "filament_shrink", "support_material_interface_fan_speed" /*,"filament_seam_gap"*/
+    "enable_pressure_advance", "pressure_advance","chamber_temperature", "filament_shrink", "support_material_interface_fan_speed", "filament_notes" /*,"filament_seam_gap"*/
 };
 
 static std::vector<std::string> s_Preset_machine_limits_options {
@@ -817,7 +817,7 @@ static std::vector<std::string> s_Preset_printer_options {
     "print_host_webui",
     "printhost_cafile","printhost_port","printhost_authorization_type",
     "printhost_user", "printhost_password", "printhost_ssl_ignore_revoke", "thumbnails",
-    "use_firmware_retraction", "use_relative_e_distances"};
+    "use_firmware_retraction", "use_relative_e_distances", "printer_notes"};
 
 static std::vector<std::string> s_Preset_sla_print_options {
     "layer_height",

src/libslic3r/Print.cpp

@@ -107,6 +107,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "filament_diameter",
         "filament_density",
         "filament_cost",
+        "filament_notes",
         "outer_wall_acceleration",
         "inner_wall_acceleration",
         "initial_layer_acceleration",

src/libslic3r/PrintConfig.cpp

@@ -1338,6 +1338,16 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionStrings{ "#F2754E" });
 
+    // PS
+    def = this->add("filament_notes", coStrings);
+    def->label = L("Filament notes");
+    def->tooltip = L("You can put your notes regarding the filament here.");
+    def->multiline = true;
+    def->full_width = true;
+    def->height = 13;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionStrings { "" });
+
     //bbs
     def          = this->add("required_nozzle_HRC", coInts);
     def->label   = L("Required nozzle HRC");
@@ -2405,6 +2415,16 @@ void PrintConfigDef::init_fff_params()
     def->max = 100;
     def->set_default_value(new ConfigOptionFloats { 0.4 });
 
+    def = this->add("notes", coString);
+    def->label = L("Configuration notes");
+    def->tooltip = L("You can put here your personal notes. This text will be added to the G-code "
+                   "header comments.");
+    def->multiline = true;
+    def->full_width = true;
+    def->height = 13;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionString(""));
+
     def = this->add("host_type", coEnum);
     def->label = L("Host Type");
     def->tooltip = L("Slic3r can upload G-code files to a printer host. This field must contain "
@@ -2569,6 +2589,15 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionString());
     def->cli = ConfigOptionDef::nocli;
 
+    def = this->add("printer_notes", coString);
+    def->label = L("Printer notes");
+    def->tooltip = L("You can put your notes regarding the printer here.");
+    def->multiline = true;
+    def->full_width = true;
+    def->height = 13;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionString(""));
+    
     def = this->add("printer_variant", coString);
     //def->label = L("Printer variant");
     def->label = "Printer variant";

src/libslic3r/PrintConfig.hpp

@@ -1039,6 +1039,11 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionBool,                gcode_comments))
     ((ConfigOptionInt,                 slow_down_layers))
     ((ConfigOptionInts,                support_material_interface_fan_speed))
+    // Orca: notes for profiles from PrusaSlicer
+    ((ConfigOptionStrings,            filament_notes))
+    ((ConfigOptionString,             notes))
+    ((ConfigOptionString,             printer_notes))
+
 
 
 )