diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 20961aa8f3..749d19dad3 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -6465,6 +6465,10 @@
             "name": "Bambu TPU 85A @BBL P2S",
             "sub_path": "filament/Bambu TPU 85A @BBL P2S.json"
         },
+        {
+            "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle",
+            "sub_path": "filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json"
+        },
         {
             "name": "Bambu TPU 85A @BBL X1C",
             "sub_path": "filament/Bambu TPU 85A @BBL X1C.json"
@@ -6505,6 +6509,14 @@
             "name": "Bambu TPU 90A @BBL P2S",
             "sub_path": "filament/Bambu TPU 90A @BBL P2S.json"
         },
+        {
+            "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle",
+            "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle",
+            "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json"
+        },
         {
             "name": "Bambu TPU 90A @BBL X1C",
             "sub_path": "filament/Bambu TPU 90A @BBL X1C.json"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json
index 7de9f2de59..42ae77ab61 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json	
@@ -162,7 +162,7 @@
         "0"
     ],
     "slow_down_layer_time": [
-        "10"
+        "6"
     ],
     "volumetric_speed_coefficients": [
         "0 0 0 0 0 0",
diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json
new file mode 100644
index 0000000000..c0b9260c42
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json	
@@ -0,0 +1,168 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle",
+    "inherits": "Bambu TPU 85A @base",
+    "from": "system",
+    "setting_id": "GFSU04_10",
+    "instantiation": "true",
+    "eng_plate_temp": [
+        "35"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "35"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_flow_ratio": [
+        "1",
+        "1"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.2",
+        "2.2"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "1.2",
+        "1.2"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1",
+        "-1"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "225",
+        "225"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "225",
+        "225"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0",
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json
index 8b4d002889..72483114fe 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json	
@@ -60,8 +60,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "0.4",
-        "0.4"
+        "1",
+        "1"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -160,8 +160,7 @@
         "0 0 0 0 0 0"
     ],
     "compatible_printers": [
-        "Bambu Lab P2S 0.6 nozzle",
-        "Bambu Lab P2S 0.8 nozzle"
+        "Bambu Lab P2S 0.6 nozzle"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"
diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json
new file mode 100644
index 0000000000..dffc0f685d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json	
@@ -0,0 +1,171 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle",
+    "inherits": "Bambu TPU 90A @base",
+    "from": "system",
+    "setting_id": "GFSU03_16",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "eng_plate_temp": [
+        "35"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "35"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_flow_ratio": [
+        "1",
+        "1"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.8",
+        "2.8"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.6",
+        "0.6"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "0",
+        "0"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1",
+        "-1"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "225",
+        "225"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "225",
+        "225"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0",
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json
new file mode 100644
index 0000000000..a2e54f6006
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json	
@@ -0,0 +1,171 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle",
+    "inherits": "Bambu TPU 90A @base",
+    "from": "system",
+    "setting_id": "GFSU03_17",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "eng_plate_temp": [
+        "35"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "35"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_flow_ratio": [
+        "1",
+        "1"
+    ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.8",
+        "2.8"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
+    "filament_retract_before_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "1.2",
+        "1.2"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil",
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe": [
+        "nil",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil",
+        "nil"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0",
+        "0"
+    ],
+    "filament_enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0",
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50",
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30",
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1",
+        "-1"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "225",
+        "225"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "225",
+        "225"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0",
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json
index 4ec30037fa..a9214cfdc9 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json	
@@ -63,8 +63,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "0.4",
-        "0.4"
+        "1",
+        "1"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -163,9 +163,7 @@
         "0 0 0 0 0 0"
     ],
     "compatible_printers": [
-        "Bambu Lab P2S 0.4 nozzle",
-        "Bambu Lab P2S 0.6 nozzle",
-        "Bambu Lab P2S 0.8 nozzle"
+        "Bambu Lab P2S 0.4 nozzle"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"