mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-08-06 13:34:05 -06:00
update locale and tweak some profiles
This commit is contained in:
SoftFever
parent
e56863af0d
commit
43087cc6a6
95 changed files with 651 additions and 179 deletions
|
|
@ -8,7 +8,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: PACKAGE VERSION\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
|
||||
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
|
||||
"Language-Team: LANGUAGE <LL@li.org>\n"
|
||||
|
|
@ -4992,8 +4992,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
|
||||
msgid "Line width"
|
||||
|
|
@ -5958,6 +5958,9 @@ msgstr ""
|
|||
msgid "Bottom surface"
|
||||
msgstr ""
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -6533,6 +6536,9 @@ msgid ""
|
|||
"models. Auto means the brim width is analysed and calculated automatically."
|
||||
msgstr ""
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -6550,6 +6556,30 @@ msgid ""
|
|||
"easily"
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7168,10 +7198,10 @@ msgstr ""
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: \n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: 2023-07-17 21:51+0200\n"
|
||||
"Last-Translator: Momo <renemosner@seznam.cz>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5317,8 +5317,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
|
|
@ -6353,6 +6353,9 @@ msgstr "Horní plocha"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Spodní plocha"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Výplň mezery"
|
||||
|
||||
|
|
@ -7026,6 +7029,9 @@ msgstr ""
|
|||
"Toto ovládá generování límce na vnější a/nebo vnitřní straně modelů. Možnost "
|
||||
"Auto znamená, že šířka límce je automaticky analyzována a vypočítána."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "Pouze vnější"
|
||||
|
||||
|
|
@ -7044,6 +7050,30 @@ msgid ""
|
|||
msgstr ""
|
||||
"Mezera mezi nejvnitřnějším límcem a předmětem může usnadnit odstranění límce"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Kompatibilní stroj"
|
||||
|
||||
|
|
@ -7774,10 +7804,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě "
|
||||
"\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". "
|
||||
|
|
@ -10095,8 +10125,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"Plochou na podložku\n"
|
||||
"Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
|
||||
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
|
||||
"\" nebo stiskněte klávesu <b>F</b>."
|
||||
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
|
||||
"podložku\" nebo stiskněte klávesu <b>F</b>."
|
||||
|
||||
#: resources/data/hints.ini: [hint:Object List]
|
||||
msgid ""
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5458,13 +5458,13 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
|
||||
"\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
|
||||
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
|
||||
"\"Timelapse Wischturm\" wählen."
|
||||
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
|
||||
">\"Timelapse Wischturm\" wählen."
|
||||
|
||||
msgid "Line width"
|
||||
msgstr "Breite der Linie"
|
||||
|
|
@ -6526,6 +6526,9 @@ msgstr "Obere Oberfläche"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Untere Fläche"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Lückenfüllung"
|
||||
|
||||
|
|
@ -7229,6 +7232,9 @@ msgstr ""
|
|||
"Seitevon Modellen. Auto bedeutet, dass die Breite des Brims automatisch "
|
||||
"analysiert und berechnet wird."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "Nur Außen"
|
||||
|
||||
|
|
@ -7248,6 +7254,30 @@ msgstr ""
|
|||
"Eine Lücke zwischen der innersten Randlinie und dem Objekt kann das Abnehmen "
|
||||
"des Randes erleichtern"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Kompatible Maschine"
|
||||
|
||||
|
|
@ -8003,13 +8033,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
|
||||
"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
|
||||
"Die Lüftergeschwindigkeit wird linear von Null bei der "
|
||||
"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
|
||||
"\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
|
||||
"wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
|
||||
"läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5275,13 +5275,13 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
|
||||
msgid "Line width"
|
||||
msgstr "Line width"
|
||||
|
|
@ -6307,6 +6307,9 @@ msgstr "Top surface"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Bottom surface"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Gap infill"
|
||||
|
||||
|
|
@ -6976,6 +6979,9 @@ msgstr ""
|
|||
"This controls the generation of the brim at outer and/or inner side of "
|
||||
"models. Auto means the brim width is analyzed and calculated automatically."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -6995,6 +7001,30 @@ msgstr ""
|
|||
"This creates a gap between the innermost brim line and the object and can "
|
||||
"make the brim easier to remove."
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Compatible machine"
|
||||
|
||||
|
|
@ -7682,10 +7712,10 @@ msgstr "Full fan speed at layer"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -6469,6 +6469,9 @@ msgstr "Superficie superior"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Superficie inferior"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Relleno de huecos"
|
||||
|
||||
|
|
@ -7170,6 +7173,9 @@ msgstr ""
|
|||
"interior de los modelos. Auto significa que el ancho de borde de adherencia "
|
||||
"es analizado y calculado automaticamente."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "Solo borde de adherencia exterior"
|
||||
|
||||
|
|
@ -7189,6 +7195,30 @@ msgstr ""
|
|||
"Un hueco entre la línea más interna del borde de adherencia y el objeto "
|
||||
"puede hacer que el borde de adherencia se retire más fácilmente"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Máquina compatible"
|
||||
|
||||
|
|
@ -10331,8 +10361,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"Colocar en la cara\n"
|
||||
"¿Sabías que puedes orientar rápidamente un modelo para que una de sus caras "
|
||||
"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la cara"
|
||||
"\" o pulse la tecla <b>F</b>."
|
||||
"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la "
|
||||
"cara\" o pulse la tecla <b>F</b>."
|
||||
|
||||
#: resources/data/hints.ini: [hint:Object List]
|
||||
msgid ""
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: Guislain Cyril\n"
|
||||
|
|
@ -5441,8 +5441,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Lors de l'enregistrement d'un Timelapse sans tête d'outil, il est recommandé "
|
||||
"d'ajouter une \"Tour d’essuyage Timelapse\"\n"
|
||||
|
|
@ -6513,6 +6513,9 @@ msgstr "Surface supérieure"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Surface inférieure"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Remplissage des espaces"
|
||||
|
||||
|
|
@ -7222,6 +7225,9 @@ msgstr ""
|
|||
"modèles. Automatique signifie que la largeur de la bordure est analysée et "
|
||||
"calculée automatiquement."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "Bordure extérieure uniquement"
|
||||
|
||||
|
|
@ -7241,6 +7247,30 @@ msgstr ""
|
|||
"Espace entre la ligne la plus interne de la bordure et l'objet. Cela peut "
|
||||
"faciliter le retrait de la bordure"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Imprimantes compatibles"
|
||||
|
||||
|
|
@ -7992,10 +8022,10 @@ msgstr "Vitesse maximale du ventilateur à la couche"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à "
|
||||
"la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"Language: hu\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -5321,8 +5321,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
|
||||
"helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
|
||||
|
|
@ -6367,6 +6367,9 @@ msgstr "Felső felület"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Alsó felület"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Réskitöltés"
|
||||
|
||||
|
|
@ -7049,6 +7052,9 @@ msgstr ""
|
|||
"This controls the generation of the brim at outer and/or inner side of "
|
||||
"models. Auto means the brim width is analyzed and calculated automatically."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7068,6 +7074,30 @@ msgstr ""
|
|||
"A legbelső peremvonal és a tárgy közötti rés, ami megkönnyítheti a perem "
|
||||
"eltávolítását"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Kompatibilis gép"
|
||||
|
||||
|
|
@ -7757,10 +7787,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"Language: it\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -5309,8 +5309,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Quando si registra un timelapse senza testa di satmpa, si consiglia di "
|
||||
"aggiungere un \"Timelapse Torre di pulizia\"\n"
|
||||
|
|
@ -6207,8 +6207,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"È stato rilevato un aggiornamento importante che deve essere eseguito prima "
|
||||
"che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
|
||||
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
|
||||
"\"."
|
||||
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
|
||||
"firmware\"."
|
||||
|
||||
msgid ""
|
||||
"The firmware version is abnormal. Repairing and updating are required before "
|
||||
|
|
@ -6344,6 +6344,9 @@ msgstr "Top surface"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Bottom surface"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Gap infill"
|
||||
|
||||
|
|
@ -7021,6 +7024,9 @@ msgstr ""
|
|||
"Auto significa che la larghezza del brim viene analizzata e calcolata "
|
||||
"automaticamente."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7040,6 +7046,30 @@ msgstr ""
|
|||
"This creates a gap between the innermost brim line and the object and can "
|
||||
"make the brim easier to remove."
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Compatible machine"
|
||||
|
||||
|
|
@ -7730,10 +7760,10 @@ msgstr "Massima velocità della ventola al layer"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
@ -11797,8 +11827,8 @@ msgstr ""
|
|||
#~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
|
||||
#~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
|
||||
#~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
|
||||
#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
|
||||
#~ "\"».\n"
|
||||
#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
|
||||
#~ "pulizia\"».\n"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "When sparse infill density is low, the internal solid infill or internal "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5171,8 +5171,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
|
||||
"を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
|
||||
|
|
@ -6173,6 +6173,9 @@ msgstr "トップ面"
|
|||
msgid "Bottom surface"
|
||||
msgstr "底面"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "隙間インフィル"
|
||||
|
||||
|
|
@ -6806,6 +6809,9 @@ msgstr ""
|
|||
"This controls the generation of the brim at outer and/or inner side of "
|
||||
"models. Auto means the brim width is analyzed and calculated automatically."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -6825,6 +6831,30 @@ msgstr ""
|
|||
"ブリムを取り外しやすくする為、一番内側のブリムラインをモデルと少し距離を設け"
|
||||
"ます。"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "対応機種"
|
||||
|
||||
|
|
@ -7478,10 +7508,10 @@ msgstr "最大回転速度の積層"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: 2023-08-03 10:45+0900\n"
|
||||
"Last-Translator: Hotsolidinfill\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5243,8 +5243,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"툴헤드 없이 시간 경과를 기록할 경우 \"시간 경과 제거 타워\"를 추가하는 것이 "
|
||||
"좋습니다\n"
|
||||
|
|
@ -6267,6 +6267,9 @@ msgstr "상단 표면"
|
|||
msgid "Bottom surface"
|
||||
msgstr "하단 표면"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "틈(갭) 채우기"
|
||||
|
||||
|
|
@ -6924,6 +6927,9 @@ msgstr ""
|
|||
"모델의 외부 그리고/또는 내부에서 챙(브림)의 생성을 제어합니다. 자동은 챙(브"
|
||||
"림) 너비가 자동으로 분석 및 계산됨을 의미합니다."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "외부 챙(브림)만"
|
||||
|
||||
|
|
@ -6943,6 +6949,30 @@ msgstr ""
|
|||
"가장 안쪽 챙(브림) 라인과 개체 사이에 간격을 주어 쉽게 챙(브림)을 제거 할 수 "
|
||||
"있게 합니다"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "호환 장비"
|
||||
|
||||
|
|
@ -7645,10 +7675,10 @@ msgstr "팬 최대 속도 레이어"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" "
|
||||
"의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"Language: nl\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -5379,8 +5379,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
|
||||
"„Timelapse Wipe Tower” toe te voegen \n"
|
||||
|
|
@ -6436,6 +6436,9 @@ msgstr "Bovenvlak"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Bodem oppervlak"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Gat opvulling"
|
||||
|
||||
|
|
@ -7124,6 +7127,9 @@ msgstr ""
|
|||
"This controls the generation of the brim at outer and/or inner side of "
|
||||
"models. Auto means the brim width is analyzed and calculated automatically."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7143,6 +7149,30 @@ msgstr ""
|
|||
"Dit creëert ruimte tussen de binnenste brimlijn en het object en zorgt "
|
||||
"ervoor dat het object eenvoudiger van het printbed kan worden verwijderd."
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Geschikte machine"
|
||||
|
||||
|
|
@ -7844,10 +7874,10 @@ msgstr "Volledige snelheid op laag"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: OrcaSlicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: 2023-08-08 15:05+0300\n"
|
||||
"Last-Translator: Ilya <Lizardjazz1@gmail.com>\n"
|
||||
"Language-Team: SPb 3D Printing\n"
|
||||
|
|
@ -15,8 +15,8 @@ msgstr ""
|
|||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
"Content-Transfer-Encoding: 8bit\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
|
||||
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
|
||||
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"X-Generator: Poedit 3.3.2\n"
|
||||
|
||||
msgid "Supports Painting"
|
||||
|
|
@ -5386,8 +5386,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"При записи таймлапса без инструментальной головки рекомендуется добавить "
|
||||
"\"Timelapse Wipe Tower\"\n"
|
||||
|
|
@ -6437,6 +6437,9 @@ msgstr "Верхний слой"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Нижняя поверхность"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Заполнение пробелов"
|
||||
|
||||
|
|
@ -7126,6 +7129,9 @@ msgstr ""
|
|||
"стороне моделей. Auto означает, что ширина каймы анализируется и "
|
||||
"рассчитывается автоматически."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "кайма снаружи"
|
||||
|
||||
|
|
@ -7145,6 +7151,30 @@ msgstr ""
|
|||
"Зазор между внутренней линией каймы и предметом может способствовать более "
|
||||
"легкому снятию каймы"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Совместимый принтер"
|
||||
|
||||
|
|
@ -7901,10 +7931,10 @@ msgstr "Полная скорость вентилятора на слое"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Скорость вентилятора линейно увеличивается от нуля на уровне "
|
||||
"«close_fan_the_first_x_layers» до максимума на уровне "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"Language: sv\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -5293,8 +5293,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
|
||||
"till ett \"Timelapse Wipe Tower\".\n"
|
||||
|
|
@ -6330,6 +6330,9 @@ msgstr "Topp yta"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Botten yta"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Mellanrums ifyllnad"
|
||||
|
||||
|
|
@ -6988,6 +6991,9 @@ msgstr ""
|
|||
"Detta styr genereringen av brim på modellens yttre och/eller inre sida. Auto "
|
||||
"innebär att brim bredd analyseras och beräknas automatiskt."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7007,6 +7013,30 @@ msgstr ""
|
|||
"Mellanrum mellan innersta brim linjen och objektet kan underlätta vid "
|
||||
"borttagande av brim"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Kompatibel maskin"
|
||||
|
||||
|
|
@ -7041,9 +7071,9 @@ msgid ""
|
|||
"quality for needle and small details"
|
||||
msgstr ""
|
||||
"Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
|
||||
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
|
||||
"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
|
||||
"kylnings kvaliteten för små detaljer"
|
||||
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
|
||||
"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
|
||||
"förbättra kylnings kvaliteten för små detaljer"
|
||||
|
||||
msgid "Normal printing"
|
||||
msgstr "Normal utskrift"
|
||||
|
|
@ -7689,10 +7719,10 @@ msgstr "Full fläkthastighet vid lager"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
@ -10465,9 +10495,9 @@ msgstr ""
|
|||
#~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu "
|
||||
#~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna "
|
||||
#~ "användningen av din Bambu Lab enhet godkänner du att följa "
|
||||
#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor"
|
||||
#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy "
|
||||
#~ "ska du inte använda Bambu Labs utrustning och tjänster."
|
||||
#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade "
|
||||
#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs "
|
||||
#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster."
|
||||
|
||||
#~ msgid "and"
|
||||
#~ msgstr "och"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: \n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: 2023-08-10 20:25-0400\n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -6415,6 +6415,9 @@ msgstr "Верхній шар"
|
|||
msgid "Bottom surface"
|
||||
msgstr "Нижня поверхня"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "Заповнення пропусків"
|
||||
|
||||
|
|
@ -7098,6 +7101,9 @@ msgstr ""
|
|||
"Це керує формуванням поля на зовнішній та/або внутрішній сторонімоделей. "
|
||||
"Auto означає, що ширина поля аналізується та обчислюється автоматично."
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr ""
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "кайма зовні"
|
||||
|
||||
|
|
@ -7117,6 +7123,30 @@ msgstr ""
|
|||
"Зазор між внутрішньою лінією кайми та предметом може сприяти легшому зняттю "
|
||||
"кайми"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr ""
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "Сумісна машина"
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Slic3rPE\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-10 20:42+0800\n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"PO-Revision-Date: 2023-04-01 13:21+0800\n"
|
||||
"Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -5124,8 +5124,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
|
||||
"右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
|
||||
|
|
@ -6110,6 +6110,9 @@ msgstr "顶面"
|
|||
msgid "Bottom surface"
|
||||
msgstr "底面"
|
||||
|
||||
msgid "Internal Bridge"
|
||||
msgstr "内部搭桥"
|
||||
|
||||
msgid "Gap infill"
|
||||
msgstr "填缝"
|
||||
|
||||
|
|
@ -6712,6 +6715,9 @@ msgid ""
|
|||
msgstr ""
|
||||
"该参数控制在模型的外侧和/或内侧生成brim。自动是指自动分析和计算边框的宽度。"
|
||||
|
||||
msgid "Mouse ear"
|
||||
msgstr "圆盘"
|
||||
|
||||
msgid "outer_only"
|
||||
msgstr "仅外侧"
|
||||
|
||||
|
|
@ -6729,6 +6735,35 @@ msgid ""
|
|||
"easily"
|
||||
msgstr "在brim和模型之间设置间隙，能够让brim更容易剥离"
|
||||
|
||||
msgid "Brim ears"
|
||||
msgstr "圆盘"
|
||||
|
||||
msgid "Only draw brim over the sharp edges of the model."
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim ear max angle"
|
||||
msgstr "圆盘最大角度"
|
||||
|
||||
msgid ""
|
||||
"Maximum angle to let a brim ear appear. \n"
|
||||
"If set to 0, no brim will be created. \n"
|
||||
"If set to ~180, brim will be created on everything but straight sections."
|
||||
msgstr ""
|
||||
"让圆盘出现的最大角度。\n"
|
||||
"如果设置为0，则不会创建圆盘。\n"
|
||||
"如果设置为约180，除直线部分外，其他部分都会创建圆盘。"
|
||||
|
||||
msgid "Brim ear detection radius"
|
||||
msgstr "圆盘检测半径"
|
||||
|
||||
msgid ""
|
||||
"The geometry will be decimated before dectecting sharp angles. This "
|
||||
"parameter indicates the minimum length of the deviation for the decimation.\n"
|
||||
"0 to deactivate"
|
||||
msgstr ""
|
||||
"在检测尖锐角度之前，几何形状将被简化。此参数表示简化的最小偏差长度。\n"
|
||||
"设为0以停用"
|
||||
|
||||
msgid "Compatible machine"
|
||||
msgstr "兼容的机器"
|
||||
|
||||
|
|
@ -7386,10 +7421,10 @@ msgstr "满速风扇在"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇"
|
||||
"第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一"
|
||||
|
|
@ -14548,8 +14583,8 @@ msgstr ""
|
|||
#~ msgstr "正在准备设置页"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "You have the following presets with saved options for \"Print Host upload"
|
||||
#~ "\""
|
||||
#~ "You have the following presets with saved options for \"Print Host "
|
||||
#~ "upload\""
|
||||
#~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
|
||||
|
||||
#~ msgid ""
|
||||
|
|
|
|||
Binary file not shown.
Binary file not shown.
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Anker",
|
||||
"version": "01.04.04.00",
|
||||
"version": "01.06.04.00",
|
||||
"force_update": "0",
|
||||
"description": "Anker configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Anycubic",
|
||||
"version": "01.05.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "Anycubic configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Artillery",
|
||||
"version": "01.04.04.00",
|
||||
"version": "01.06.04.00",
|
||||
"force_update": "0",
|
||||
"description": "Artillery configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "BIQU",
|
||||
"version": "01.01.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "BIQU configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Creality",
|
||||
"version": "01.06.01.00",
|
||||
"version": "01.06.02.00",
|
||||
"force_update": "0",
|
||||
"description": "Creality configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Custom Printer",
|
||||
"version": "01.06.00.00",
|
||||
"version": "01.06.01.00",
|
||||
"force_update": "0",
|
||||
"description": "My configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Elegoo",
|
||||
"version": "01.01.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "Elegoo configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "FLSun",
|
||||
"version": "01.06.00.02",
|
||||
"version": "01.06.04.00",
|
||||
"force_update": "0",
|
||||
"description": "FLSun configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.16",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.16",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.18",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.18",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.22",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.22",
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Folgertech",
|
||||
"version": "01.05.00.03",
|
||||
"version": "01.06.00.03",
|
||||
"force_update": "0",
|
||||
"description": "Folgertech configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "Kingroon",
|
||||
"url": "https://kingroon.com/",
|
||||
"version": "01.06.04.00",
|
||||
"version": "01.06.05.00",
|
||||
"force_update": "0",
|
||||
"description": "Kingroon configuration files",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -4,7 +4,8 @@
|
|||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_start_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"extruder_colour": ["#018001"],
|
||||
"extruder_offset": ["0x0"],
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "Orca Arena Printer",
|
||||
"url": "",
|
||||
"version": "01.06.01.00",
|
||||
"version": "01.06.02.00",
|
||||
"force_update": "0",
|
||||
"description": "Orca Arena configuration files",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Orca Arena X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Prusa",
|
||||
"version": "01.05.04.00",
|
||||
"version": "01.06.04.00",
|
||||
"force_update": "0",
|
||||
"description": "Prusa configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -129,6 +129,7 @@
|
|||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M400 U1\n",
|
||||
"wipe": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Qidi",
|
||||
"version": "01.06.04.01",
|
||||
"version": "01.06.05.00",
|
||||
"force_update": "0",
|
||||
"description": "Qidi configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "2.5",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "Raise3D",
|
||||
"url": "",
|
||||
"version": "01.00.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "Raise3D configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "RatRig",
|
||||
"version": "01.06.04.00",
|
||||
"version": "01.06.05.01",
|
||||
"force_update": "0",
|
||||
"description": "RatRig configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "Sovol",
|
||||
"url": "",
|
||||
"version": "01.00.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "Sovol configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Tronxy",
|
||||
"version": "01.05.10.1",
|
||||
"version": "01.06.00.1",
|
||||
"force_update": "0",
|
||||
"description": "Tronxy configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "TwoTrees",
|
||||
"version": "01.05.01",
|
||||
"version": "01.06.01.00",
|
||||
"force_update": "1",
|
||||
"description": "TwoTrees configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "UltiMaker",
|
||||
"url": "",
|
||||
"version": "01.01.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "UltiMaker configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Vivedino",
|
||||
"version": "01.06.00.01",
|
||||
"version": "01.06.04.01",
|
||||
"force_update": "0",
|
||||
"description": "Vivedino configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Voron",
|
||||
"version": "01.06.04.02",
|
||||
"version": "01.06.05.02",
|
||||
"force_update": "0",
|
||||
"description": "Voron configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"name": "Voxelab",
|
||||
"url": "",
|
||||
"version": "01.00.00.00",
|
||||
"version": "01.06.00.00",
|
||||
"force_update": "0",
|
||||
"description": "Voxelab configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@
|
|||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "Vzbot",
|
||||
"version": "01.06.00.00",
|
||||
"version": "01.06.04.00",
|
||||
"force_update": "0",
|
||||
"description": "Vzbot configurations",
|
||||
"machine_model_list": [
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
"1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Vzbot",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue