Clip the organic supports outside bed (#8195)

Clip the organic supports outside bed. (SoftFever/OrcaSlicer#7922)

(cherry picked from commit bambulab/BambuStudio@2c6a6ae5f4)

Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Noisyfox 2025-02-07 23:18:58 +08:00 committed by GitHub
parent af893267e6
commit 42577feeba
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
6 changed files with 62 additions and 40 deletions

View file

@ -7,8 +7,6 @@
// CuraEngine is released under the terms of the AGPLv3 or higher.
#include "TreeSupport3D.hpp"
#include "TreeSupportCommon.hpp"
#include "SupportCommon.hpp"
#include "../AABBTreeIndirect.hpp"
#include "../BuildVolume.hpp"
@ -21,6 +19,9 @@
#include "../Polygon.hpp"
#include "../Polyline.hpp"
#include "../MutablePolygon.hpp"
#include "TreeSupportCommon.hpp"
#include "SupportCommon.hpp"
#include "TreeSupport.hpp"
#include "libslic3r.h"
#include <cassert>
@ -34,6 +35,7 @@
#include <boost/log/trivial.hpp>
#include <tbb/parallel_for.h>
#include <tbb/parallel_for_each.h>
#if defined(TREE_SUPPORT_SHOW_ERRORS) && defined(_WIN32)
#define TREE_SUPPORT_SHOW_ERRORS_WIN32
@ -4106,13 +4108,14 @@ static void generate_support_areas(Print &print, const BuildVolume &build_volume
continue;
// Produce the support G-code.
// Used by both classic and tree supports.
SupportGeneratorLayersPtr raft_layers = generate_raft_base(print_object, support_params, print_object.slicing_parameters(),
top_contacts, interface_layers, base_interface_layers, intermediate_layers, layer_storage);
#if 1 //#ifdef SLIC3R_DEBUG
SupportGeneratorLayersPtr layers_sorted =
#endif // SLIC3R_DEBUG
generate_support_layers(print_object, raft_layers, bottom_contacts, top_contacts, intermediate_layers, interface_layers, base_interface_layers);
SupportGeneratorLayersPtr raft_layers = generate_raft_base(print_object, support_params, print_object.slicing_parameters(), top_contacts, interface_layers, base_interface_layers, intermediate_layers, layer_storage);
SupportGeneratorLayersPtr layers_sorted = generate_support_layers(print_object, raft_layers, bottom_contacts, top_contacts, intermediate_layers, interface_layers, base_interface_layers);
// BBS: This is a hack to avoid the support being generated outside the bed area. See #4769.
tbb::parallel_for_each(layers_sorted.begin(), layers_sorted.end(), [&](SupportGeneratorLayer *layer) {
if (layer) layer->polygons = intersection(layer->polygons, volumes.m_bed_area);
});
// Don't fill in the tree supports, make them hollow with just a single sheath line.
generate_support_toolpaths(print_object.support_layers(), print_object.config(), support_params, print_object.slicing_parameters(),
raft_layers, bottom_contacts, top_contacts, intermediate_layers, interface_layers, base_interface_layers);
@ -4363,9 +4366,10 @@ void organic_draw_branches(
std::vector<Polygons> slices = slice_mesh(partial_mesh, slice_z, mesh_slicing_params, throw_on_cancel);
bottom_contacts.clear();
//FIXME parallelize?
for (LayerIndex i = 0; i < LayerIndex(slices.size()); ++ i)
slices[i] = diff_clipped(slices[i], volumes.getCollision(0, layer_begin + i, true)); //FIXME parent_uses_min || draw_area.element->state.use_min_xy_dist);
for (LayerIndex i = 0; i < LayerIndex(slices.size()); ++i) {
slices[i] = diff_clipped(slices[i], volumes.getCollision(0, layer_begin + i, true)); // FIXME parent_uses_min || draw_area.element->state.use_min_xy_dist);
slices[i] = intersection(slices[i], volumes.m_bed_area);
}
size_t num_empty = 0;
if (slices.front().empty()) {
// Some of the initial layers are empty.
@ -4568,7 +4572,7 @@ void organic_draw_branches(
} // namespace TreeSupport3D
void generate_tree_support_3D(PrintObject &print_object, std::function<void()> throw_on_cancel)
void generate_tree_support_3D(PrintObject &print_object, TreeSupport* tree_support, std::function<void()> throw_on_cancel)
{
size_t idx = 0;
for (const PrintObject *po : print_object.print()->objects()) {
@ -4576,9 +4580,13 @@ void generate_tree_support_3D(PrintObject &print_object, std::function<void()> t
break;
++idx;
}
TreeSupport3D::generate_support_areas(*print_object.print(),
BuildVolume(Pointfs{ Vec2d{ -300., -300. }, Vec2d{ -300., +300. }, Vec2d{ +300., +300. }, Vec2d{ +300., -300. } }, 0.), { idx },
throw_on_cancel);
Points bedpts = tree_support->m_machine_border.contour.points;
Pointfs bedptsf;
std::transform(bedpts.begin(), bedpts.end(), std::back_inserter(bedptsf), [](const Point &p) { return unscale(p); });
BuildVolume build_volume{ bedptsf, tree_support->m_print_config->printable_height };
TreeSupport3D::generate_support_areas(*print_object.print(), build_volume, { idx }, throw_on_cancel);
}
} // namespace Slic3r