Fix typo firware -> firmware

(cherry picked from commit a16cf773549d6731a80e6f87b476c450a0f13702)

resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json

@@ -163,9 +163,9 @@
     "z_hop_types": [
         "Auto Lift"
     ],
-    "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
+    "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
     "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
-    "time_lapse_gcode": ";========Date 20250206========\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n",
+    "time_lapse_gcode": ";========Date 20250206========\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A",
     "machine_pause_gcode": "M400 U1"
 }

resources/profiles/BBL/machine/fdm_bbl_3dp_002_common.json

@@ -358,9 +358,9 @@
         "Auto Lift",
         "Auto Lift"
     ],
-    "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
+    "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
     "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
-    "time_lapse_gcode": ";========Date 20250206========\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0 T3000\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0 T3000\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n",
+    "time_lapse_gcode": ";========Date 20250206========\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0 T3000\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0 T3000\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 8.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F[old_filament_e_feedrate] L[flush_length] H{nozzle_diameter[previous_extruder]} T{nozzle_temperature_range_high[previous_extruder]} P[old_filament_temp]\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H{nozzle_diameter[next_extruder]} T{nozzle_temperature_range_high[next_extruder]} P[new_filament_temp]\n\nT[next_extruder]\nM400\nM83\n{if next_extruder < 255}\n\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 Y327.6 F20000\nG1 Y336 F9000\nG1 Y327.6 F20000\nG1 Y336 F9000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 Y327.6 F20000\nG1 Y336 F9000\nG1 Y327.6 F20000\nG1 Y336 F9000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 Y327.6 F20000\nG1 Y336 F9000\nG1 Y327.6 F20000\nG1 Y336 F9000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM400\nM109 S[new_filament_temp]\nG1 E2 F60 ;Compensate for filament spillage during waiting temperature\n\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S255\nM400 S3\nG1 Y327.6 F20000\nG1 Y336 F9000\nG1 Y327.6 F20000\nG1 Y336 F9000\nG1 Y327.6 F20000\nM400\nM106 P1 S0\n\nM629\n\nM400\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM400\nM83\nG1 Y295 F30000\nG1 Y265 F18000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM621 S[next_extruder]A\nG1 Z{max_layer_z + 3.0} F3000\n\n",
     "machine_pause_gcode": "M400 U1"
 }