3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-12 09:17:52 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

New feature: ability to override specific settings for individual objects in the plater. #344

Browse source
This commit is contained in:
Alessandro Ranellucci 2013-08-25 14:37:50 +02:00
parent 2dd6325bf8
commit 3d6fb1b05c
12 changed files with 248 additions and 55 deletions
Download patch file Download diff file Expand all files Collapse all files

18
lib/Slic3r/Layer/Region.pm
View file

@ -14,7 +14,7 @@ has 'layer' => (
weak_ref => 1,
required => 1,
trigger => 1,
handles => [qw(id slice_z print_z height flow)],
handles => [qw(id slice_z print_z height flow object print config)],
);
has 'region' => (is => 'ro', required => 1, handles => [qw(extruders)]);
has 'perimeter_flow' => (is => 'rw');
@ -103,7 +103,7 @@ sub make_surfaces {
}
# detect thin walls by offsetting slices by half extrusion inwards
if ($Slic3r::Config->thin_walls) {
if ($self->config->thin_walls) {
$self->thin_walls([]);
# we use spacing here because there could be a case where
# the slice collapses with width but doesn't collapse with spacing,
@ -183,7 +183,7 @@ sub make_perimeters {
# extra perimeters for each one
foreach my $surface (@{$self->slices}) {
# detect how many perimeters must be generated for this island
my $loop_number = $Slic3r::Config->perimeters + ($surface->extra_perimeters || 0);
my $loop_number = $self->config->perimeters + ($surface->extra_perimeters || 0);
# generate loops
# (one more than necessary so that we can detect gaps even after the desired
@ -203,7 +203,7 @@ sub make_perimeters {
# where offset2() collapses the expolygon, then there's no room for an inner loop
# and we can extract the gap for later processing
if ($Slic3r::Config->gap_fill_speed > 0 && $Slic3r::Config->fill_density > 0) {
if ($Slic3r::Config->gap_fill_speed > 0 && $self->object->config->fill_density > 0) {
my $diff = diff_ex(
[ offset(\@last, -0.5*$spacing) ],
# +2 on the offset here makes sure that Clipper float truncation
@ -411,16 +411,16 @@ sub prepare_fill_surfaces {
my $self = shift;
# if no solid layers are requested, turn top/bottom surfaces to internal
if ($Slic3r::Config->top_solid_layers == 0) {
if ($self->config->top_solid_layers == 0) {
$_->surface_type(S_TYPE_INTERNAL) for grep $_->surface_type == S_TYPE_TOP, @{$self->fill_surfaces};
}
if ($Slic3r::Config->bottom_solid_layers == 0) {
if ($self->config->bottom_solid_layers == 0) {
$_->surface_type(S_TYPE_INTERNAL) for grep $_->surface_type == S_TYPE_BOTTOM, @{$self->fill_surfaces};
}
# turn too small internal regions into solid regions according to the user setting
if ($Slic3r::Config->fill_density > 0) {
my $min_area = scale scale $Slic3r::Config->solid_infill_below_area; # scaling an area requires two calls!
if ($self->object->config->fill_density > 0) {
my $min_area = scale scale $self->config->solid_infill_below_area; # scaling an area requires two calls!
my @small = grep $_->surface_type == S_TYPE_INTERNAL && $_->expolygon->contour->area <= $min_area, @{$self->fill_surfaces};
$_->surface_type(S_TYPE_INTERNALSOLID) for @small;
Slic3r::debugf "identified %d small solid surfaces at layer %d\n", scalar(@small), $self->id if @small > 0;
@ -459,7 +459,7 @@ sub process_external_surfaces {
# if we're slicing with no infill, we can't extend external surfaces
# over non-existent infill
my @fill_boundaries = $Slic3r::Config->fill_density > 0
my @fill_boundaries = $self->object->config->fill_density > 0
? @{$self->fill_surfaces}
: grep $_->surface_type != S_TYPE_INTERNAL, @{$self->fill_surfaces};