Adds resonance avoidance ported from qidi slicer (#9403)

* Update tab.cpp for resonance avoidance

* update files for resonance avoidance

updated gcode.cpp, gcode.hpp, preset.cpp, printconfig.cpp, printconfig.hpp to add resonance avoidance. Based on qidi slicer changes.

* Update README.md

* Update README.md

* Update Tab.cpp

* Update Preset.cpp

Updating code comments

* Update PrintConfig.cpp

* Update PrintConfig.hpp

* Update .gitattributes

* Remove carriage return

* Update doc

* Move resonance avoidance settings to printer settings

* Disable resonance avoidance by default

* Update options

---------

Co-authored-by: Paul Mourer <paul.mourer@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>

.gitattributes

@@ -0,0 +1,2 @@
+# Set the default behavior, in case people don't have core.autocrlf set.
+* text=auto

src/libslic3r/GCode.cpp

@@ -5404,12 +5404,37 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
     //}
     if (EXTRUDER_CONFIG(filament_max_volumetric_speed) > 0) {
         // cap speed with max_volumetric_speed anyway (even if user is not using autospeed)
-        speed = std::min(
-            speed,
-            EXTRUDER_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm
-        );
+        speed = std::min(speed, EXTRUDER_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm);
     }
+    // ORCA: resonance‑avoidance on short external perimeters
+{
+    double ref_speed = speed;  // stash the pre‑cap speed
+    if (path.role() == erExternalPerimeter
+        && m_config.resonance_avoidance.value) {
 
+        // if our original speed was above “max”, disable RA for this loop
+        if (ref_speed > m_config.max_resonance_avoidance_speed.value) {
+            m_resonance_avoidance = false;
+        }
+
+        // re‑apply volumetric cap
+        if (EXTRUDER_CONFIG(filament_max_volumetric_speed) > 0) {
+            speed = std::min(
+                speed,
+                EXTRUDER_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm
+            );
+        }
+
+        // if still in avoidance mode and under “max”, clamp to “min”
+        if (m_resonance_avoidance
+            && speed <= m_config.max_resonance_avoidance_speed.value) {
+            speed = std::min(speed, m_config.min_resonance_avoidance_speed.value);
+        }
+
+        // reset flag for next segment
+        m_resonance_avoidance = true;
+    }
+}
     
     bool variable_speed = false;
     std::vector<ProcessedPoint> new_points {};

src/libslic3r/GCode.hpp

@@ -165,6 +165,7 @@ public:
     GCode() :
     	m_origin(Vec2d::Zero()),
         m_enable_loop_clipping(true),
+        m_resonance_avoidance(true),
         m_enable_cooling_markers(false),
         m_enable_extrusion_role_markers(false),
         m_last_processor_extrusion_role(erNone),
@@ -506,6 +507,8 @@ private:
     AvoidCrossingPerimeters             m_avoid_crossing_perimeters;
     RetractWhenCrossingPerimeters       m_retract_when_crossing_perimeters;
     bool                                m_enable_loop_clipping;
+    //resonance avoidance
+    bool                                m_resonance_avoidance; 
     // If enabled, the G-code generator will put following comments at the ends
     // of the G-code lines: _EXTRUDE_SET_SPEED, _WIPE, _OVERHANG_FAN_START, _OVERHANG_FAN_END
     // Those comments are received and consumed (removed from the G-code) by the CoolingBuffer.pm Perl module.

src/libslic3r/Preset.cpp

@@ -837,7 +837,7 @@ static std::vector<std::string> s_Preset_print_options {
      "hole_to_polyhole", "hole_to_polyhole_threshold", "hole_to_polyhole_twisted", "mmu_segmented_region_max_width", "mmu_segmented_region_interlocking_depth",
      "small_area_infill_flow_compensation", "small_area_infill_flow_compensation_model",
      "seam_slope_type", "seam_slope_conditional", "scarf_angle_threshold", "scarf_joint_speed", "scarf_joint_flow_ratio", "seam_slope_start_height", "seam_slope_entire_loop", "seam_slope_min_length", "seam_slope_steps", "seam_slope_inner_walls", "scarf_overhang_threshold",
-     "interlocking_beam", "interlocking_orientation", "interlocking_beam_layer_count", "interlocking_depth", "interlocking_boundary_avoidance", "interlocking_beam_width","calib_flowrate_topinfill_special_order"
+     "interlocking_beam", "interlocking_orientation", "interlocking_beam_layer_count", "interlocking_depth", "interlocking_boundary_avoidance", "interlocking_beam_width","calib_flowrate_topinfill_special_order",
 };
 
 static std::vector<std::string> s_Preset_filament_options {
@@ -878,6 +878,8 @@ static std::vector<std::string> s_Preset_machine_limits_options {
     "machine_min_extruding_rate", "machine_min_travel_rate",
     "machine_max_jerk_x", "machine_max_jerk_y", "machine_max_jerk_z", "machine_max_jerk_e",
     "machine_max_junction_deviation",
+    //resonance avoidance ported from qidi slicer
+    "resonance_avoidance", "min_resonance_avoidance_speed", "max_resonance_avoidance_speed",
 };
 
 static std::vector<std::string> s_Preset_printer_options {

src/libslic3r/PrintConfig.cpp

@@ -3554,6 +3554,31 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloats{ 0., 0. });
 
+    // resonance avoidance ported over from qidi slicer
+    def          = this->add("resonance_avoidance", coBool);
+    def->label   = L("Resonance avoidance");
+    def->tooltip = L("By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the "
+                     "model are avoided.\n"
+                     "Please turn this option off when testing ringing.");
+    def->mode    = comAdvanced;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def           = this->add("min_resonance_avoidance_speed", coFloat);
+    def->label    = L("Min");
+    def->tooltip  = L("Minimum speed of resonance avoidance.");
+    def->sidetext = L("mm/s");
+    def->min      = 0;
+    def->mode     = comAdvanced;
+    def->set_default_value(new ConfigOptionFloat(70));
+
+    def           = this->add("max_resonance_avoidance_speed", coFloat);
+    def->label    = L("Max");
+    def->tooltip  = L("Maximum speed of resonance avoidance.");
+    def->sidetext = L("mm/s");
+    def->min      = 0;
+    def->mode     = comAdvanced;
+    def->set_default_value(new ConfigOptionFloat(120));
+
     def = this->add("fan_max_speed", coFloats);
     def->label = L("Fan speed");
     def->tooltip = L("Part cooling fan speed may be increased when auto cooling is enabled. "

src/libslic3r/PrintConfig.hpp

@@ -1049,8 +1049,6 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionFloatOrPercent,       scarf_joint_speed))
     ((ConfigOptionFloat,                scarf_joint_flow_ratio))
     ((ConfigOptionPercent,              scarf_overhang_threshold))
-
-
 )
 
 PRINT_CONFIG_CLASS_DEFINE(
@@ -1085,6 +1083,11 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionFloats,               machine_min_travel_rate))
     // M205 S... [mm/sec]
     ((ConfigOptionFloats,               machine_min_extruding_rate))
+
+    //resonance avoidance ported from qidi slicer
+    ((ConfigOptionBool,                 resonance_avoidance))
+    ((ConfigOptionFloat,                min_resonance_avoidance_speed))
+    ((ConfigOptionFloat,                max_resonance_avoidance_speed))
 )
 
 // This object is mapped to Perl as Slic3r::Config::GCode.

src/slic3r/GUI/Tab.cpp

@@ -2206,6 +2206,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("support_interface_speed");
         optgroup = page->new_optgroup(L("Overhang speed"), L"param_overhang_speed", 15);
         optgroup->append_single_option_line("enable_overhang_speed", "slow-down-for-overhang");
+
         // Orca: DEPRECATED
         // optgroup->append_single_option_line("overhang_speed_classic", "slow-down-for-overhang");
         optgroup->append_single_option_line("slowdown_for_curled_perimeters");
@@ -4166,6 +4167,17 @@ PageShp TabPrinter::build_kinematics_page()
     }
     auto optgroup = page->new_optgroup(L("Advanced"), "param_advanced");
     optgroup->append_single_option_line("emit_machine_limits_to_gcode");
+    
+    // resonance avoidance ported over from qidi slicer
+    optgroup = page->new_optgroup(L("Resonance Avoidance"));
+    optgroup->append_single_option_line("resonance_avoidance");
+    // Resonance‑avoidance speed inputs
+    {
+        Line resonance_line = {L("Resonance Avoidance Speed"), L("")};
+        resonance_line.append_option(optgroup->get_option("min_resonance_avoidance_speed"));
+        resonance_line.append_option(optgroup->get_option("max_resonance_avoidance_speed"));
+        optgroup->append_line(resonance_line);
+    }
 
     const std::vector<std::string> speed_axes{
         "machine_max_speed_x",
@@ -4708,6 +4720,10 @@ void TabPrinter::toggle_options()
         for (int i = 0; i < max_field; ++i)
             toggle_option("machine_max_junction_deviation", gcf == gcfMarlinFirmware, i);
         toggle_line("machine_max_junction_deviation", gcf == gcfMarlinFirmware);
+
+        bool resonance_avoidance = m_config->opt_bool("resonance_avoidance");
+        toggle_option("min_resonance_avoidance_speed", resonance_avoidance);
+        toggle_option("max_resonance_avoidance_speed", resonance_avoidance);
     }
 }