diff --git a/README.md b/README.md
index ca3666da50..7627e8c5cb 100644
--- a/README.md
+++ b/README.md
@@ -30,7 +30,7 @@ Optimize your prints with ultra-fast slicing, intelligent support generation, an
 <tr>
 <td>
 <strong>⚠️ CAUTION:</strong><br><br>
-There are several clickbait and malicious websites pretending to be Official OrcaSlicer. These sites may redirect you to dangerous downloads or contain misleading information.
+Several clickbait and malicious websites, such as orca-slicer.com and orcaslicer.net, are pretending to be the official OrcaSlicer site. These sites may redirect you to dangerous downloads or contain misleading information. Our only official website is www.orcaslicer.com.
 <br><br>
 If you come across any of these in search results, please <a href="https://safebrowsing.google.com/safebrowsing/report_phish/?">report them as unsafe or phishing</a>  to help keep the community secure.
 </td>
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json
index b8edf932b1..43fbc5a909 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "25",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "800",
     "inner_wall_acceleration": "1200",
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 5T 0.25.json
index a6db18bf93..f80ca769a8 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "25",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "800",
     "inner_wall_acceleration": "1200",
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json
index c47c246347..81badec8d2 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "800",
     "inner_wall_acceleration": "1200",
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 5T 0.25.json
index b0551173a1..64dedcd795 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "800",
     "inner_wall_acceleration": "1200",
diff --git a/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json
index 97c51b1534..386f5d17fb 100644
--- a/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "40",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2000",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 5T 0.4.json
index 12f267ef99..d3509345b5 100644
--- a/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "40",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2000",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json
index 49003c3c9b..8d89eeb5da 100644
--- a/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 5T 0.5.json
index 8757c36731..1025b3f7c1 100644
--- a/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json
index 45aef92347..bbdc48232e 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 5T 0.25.json
index 8b035542c2..01f227b125 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json
index b3cad13a37..ccf78c2674 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1000",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json
index 4c72d786cb..0df3883e1f 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "1200",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.25.json
index f8c787b973..525ff7e27d 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1000",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.3.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.3.json
index 485deb8814..a759ef438a 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.3.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 5T 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "1500",
     "outer_wall_acceleration": "1200",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json
index da0b2ad4bf..a7ccc3a898 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json
index b52fc6387d..653d62c984 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "45",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.25.json
index 639aff4228..be0c9243a3 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.4.json
index ccff050ef8..568de11031 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "45",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json
index 8de6148a6d..806cc9eb5e 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1000",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json
index a9ba582754..5352ded323 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "45",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json
index 289008b592..0c74aac0b8 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json
index d1cdfea181..20f32066ac 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.25.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.25.json
index a7297d8090..13babc7da4 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.25.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1000",
     "inner_wall_acceleration": "1500",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.4.json
index d2aec48076..1404a9b77c 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "45",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.5.json
index 915549bf89..18eb761e36 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.6.json
index a2ae255f1d..7673fe74aa 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json
index f9c8b52957..23487390f7 100644
--- a/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "45%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 5T 0.3.json b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 5T 0.3.json
index 3e7b6be7a3..8d4a516242 100644
--- a/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 5T 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 5T 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "45%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json
index 73cd19972a..abb1bf26a2 100644
--- a/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 5T 0.3.json b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 5T 0.3.json
index 1edc261538..66373f4d58 100644
--- a/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 5T 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 5T 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json
index ae558c807c..a6552a771b 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "45%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json
index 71544dcec8..8acf3e0afa 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50%",
     "bridge_speed": "50",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json
index 0fbd778dfb..0ecdb787cd 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json
index de236e4fe2..58b8565b34 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.3.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.3.json
index 7cf7feef69..59e45a4981 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.3.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.3.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "45%",
     "bridge_speed": "30",
     "gap_infill_speed": "50",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.4.json
index 0a7f6a1bff..b5f4e95882 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50%",
     "bridge_speed": "50",
     "gap_infill_speed": "120",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.5.json
index e194d1fca1..3e0339d62e 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.6.json
index f2c687646d..b22e0d31ca 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json
index ffe32a146b..8fe3008302 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "50",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json
index 7fb8fe10e1..7f46ecba44 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json
index 5bf4600fe0..c6fdb68e16 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.4.json
index 8eea2dce7b..bc43ba108a 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "50",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.5.json
index c0f09f98dc..2cb4aea022 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.6.json
index db0d030cfe..3822bdf588 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "75",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json
index f3c7a8a1f8..e00c9a0a80 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json
index 1d9b56bdb5..f6a3104daa 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.5.json
index e0fbe8c044..6f9717f1be 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.6.json
index 0e093066ad..cece14b503 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json
index 0fb224dd2b..386938adbf 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "50",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json
index d99e79f197..e3aacb0b38 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json
index 800ae7ac7f..cac6f4d2b4 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.4.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.4.json
index fae3bb027f..e25ec658eb 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.4.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.4.json	
@@ -37,10 +37,10 @@
     "support_interface_speed": "50",
     "bridge_speed": "50",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.5.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.5.json
index dbebc937c7..75f89d52c6 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.5.json	
@@ -38,10 +38,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "25",
-    "overhang_3_4_speed": "30",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.6.json
index 1f8cdbe903..779dd0b9e1 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json
index 465fe7bab5..313112445f 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 5T 0.8.json b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 5T 0.8.json
index 02b71942ef..2ec4f48d27 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 5T 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 5T 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "40",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json
index 0eae23a790..85ed392397 100644
--- a/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 5T 0.6.json
index c4f74614b1..fbeb27a27d 100644
--- a/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "65",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "50",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "2500",
     "inner_wall_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json
index 1590ee3902..bf9e7751c2 100644
--- a/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 5T 0.6.json b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 5T 0.6.json
index 4c20e1b3a4..1c3fac6290 100644
--- a/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 5T 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 5T 0.6.json	
@@ -39,10 +39,10 @@
     "support_interface_speed": "75%",
     "bridge_speed": "40",
     "gap_infill_speed": "70",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "90%",
+    "overhang_1_4_speed": "90%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2500",
diff --git a/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json
index e293dd0381..39e1eec415 100644
--- a/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "35",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 5T 0.8.json b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 5T 0.8.json
index 93555af030..5b9e1f00f6 100644
--- a/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 5T 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 5T 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "35",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json
index 43cc1db96b..8e94971bd9 100644
--- a/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json	
+++ b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "30",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 5T 0.8.json b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 5T 0.8.json
index 0503239052..48c71eab6c 100644
--- a/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 5T 0.8.json	
+++ b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 5T 0.8.json	
@@ -41,10 +41,10 @@
     "support_interface_speed": "85%",
     "bridge_speed": "22",
     "gap_infill_speed": "30",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "25",
-    "overhang_4_4_speed": "80%",
+    "overhang_1_4_speed": "80%",
+    "overhang_2_4_speed": "25",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "15",
     "default_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "inner_wall_acceleration": "2000",
diff --git a/resources/profiles/Prusa/process/process_common_xl.json b/resources/profiles/Prusa/process/process_common_xl.json
index 4842bea93d..37abcc853b 100644
--- a/resources/profiles/Prusa/process/process_common_xl.json
+++ b/resources/profiles/Prusa/process/process_common_xl.json
@@ -58,10 +58,10 @@
     "ironing_flow": "15%",
     "ironing_spacing": "0.1",
     "enable_overhang_speed": "1",
-    "overhang_1_4_speed": "15",
-    "overhang_2_4_speed": "15",
-    "overhang_3_4_speed": "20",
-    "overhang_4_4_speed": "25",
+    "overhang_1_4_speed": "25",
+    "overhang_2_4_speed": "20",
+    "overhang_3_4_speed": "15",
+    "overhang_4_4_speed": "15",
     "travel_speed": "400",
     "default_acceleration": "1250",
     "outer_wall_acceleration": "1000",
diff --git a/resources/web/guide/1/1.css b/resources/web/guide/1/1.css
index 2529f47934..941ab77b2b 100644
--- a/resources/web/guide/1/1.css
+++ b/resources/web/guide/1/1.css
@@ -7,6 +7,7 @@ body
 {
 	text-align:center;
 	padding-top: 10%;
+	overflow: auto;
 }
 
 #SlicerIcon
@@ -37,4 +38,4 @@ body
 {
 	display: inline-block;
     text-decoration:none;	
-}
\ No newline at end of file
+}
diff --git a/src/libslic3r/GCode/AvoidCrossingPerimeters.cpp b/src/libslic3r/GCode/AvoidCrossingPerimeters.cpp
index 3aef4fab18..21f02b3462 100644
--- a/src/libslic3r/GCode/AvoidCrossingPerimeters.cpp
+++ b/src/libslic3r/GCode/AvoidCrossingPerimeters.cpp
@@ -1019,7 +1019,7 @@ static ExPolygons inner_offset(const ExPolygons &ex_polygons, double offset_dis)
     // remove too small holes from the ex_poly
     for (ExPolygon &ex_poly : ex_poly_result) {
         for (auto iter = ex_poly.holes.begin(); iter != ex_poly.holes.end();) {
-            auto out_offset_holes = offset(*iter, scale_(1.0f));
+            auto out_offset_holes = offset(*iter, scale_(0.1f));
             if (out_offset_holes.empty()) {
                 iter = ex_poly.holes.erase(iter);
             } else {
diff --git a/src/libslic3r/GCode/CoolingBuffer.cpp b/src/libslic3r/GCode/CoolingBuffer.cpp
index 6bf6034101..53c17422f3 100644
--- a/src/libslic3r/GCode/CoolingBuffer.cpp
+++ b/src/libslic3r/GCode/CoolingBuffer.cpp
@@ -153,7 +153,8 @@ struct PerExtruderAdjustments
                 assert(line.time_max >= 0.f && line.time_max < FLT_MAX);
                 line.slowdown = true;
                 line.time     = line.time_max;
-                line.feedrate = line.length / line.time;
+                if (line.time > 0.f)
+                    line.feedrate = line.length / line.time;
             }
             time_total += line.time;
         }
@@ -169,7 +170,8 @@ struct PerExtruderAdjustments
             if (line.adjustable(slowdown_external_perimeters)) {
                 line.slowdown = true;
                 line.time     = std::min(line.time_max, line.time * factor);
-                line.feedrate = line.length / line.time;
+                if (line.time > 0.f)
+                    line.feedrate = line.length / line.time;
             }
             time_total += line.time;
         }
diff --git a/src/slic3r/GUI/PartPlate.hpp b/src/slic3r/GUI/PartPlate.hpp
index 708e0624ec..c273c07818 100644
--- a/src/slic3r/GUI/PartPlate.hpp
+++ b/src/slic3r/GUI/PartPlate.hpp
@@ -206,9 +206,9 @@ private:
     void on_filament_map_mode_change();
 
 public:
-    static const unsigned int PLATE_NAME_HOVER_ID = 6;
-    static const unsigned int PLATE_FILAMENT_MAP_ID = 8;
-    static const unsigned int GRABBER_COUNT = 9;
+    static constexpr unsigned int PLATE_NAME_HOVER_ID = 6;
+    static constexpr unsigned int PLATE_FILAMENT_MAP_ID = 8;
+    static constexpr unsigned int GRABBER_COUNT = 9;
 
     static ColorRGBA SELECT_COLOR;
     static ColorRGBA UNSELECT_COLOR;
@@ -675,7 +675,7 @@ public:
         void                     reset();
     };
 
-    static const unsigned int MAX_PLATES_COUNT = MAX_PLATE_COUNT;
+    static constexpr unsigned int MAX_PLATES_COUNT = MAX_PLATE_COUNT;
     static GLTexture bed_textures[(unsigned int)btCount];
     static bool is_load_bedtype_textures;
     static bool is_load_cali_texture;
diff --git a/src/slic3r/GUI/SceneRaycaster.cpp b/src/slic3r/GUI/SceneRaycaster.cpp
index 08c3407632..64a091211b 100644
--- a/src/slic3r/GUI/SceneRaycaster.cpp
+++ b/src/slic3r/GUI/SceneRaycaster.cpp
@@ -9,6 +9,9 @@
 namespace Slic3r {
 namespace GUI {
 
+// EIdBase::Volume must be greater than PartPlateList::MAX_PLATES_COUNT * PartPlate::GRABBER_COUNT
+static_assert((int) SceneRaycaster::EIdBase::Volume > PartPlateList::MAX_PLATES_COUNT * PartPlate::GRABBER_COUNT, "EIdBase::Volume too small");
+
 SceneRaycaster::SceneRaycaster() {
 #if ENABLE_RAYCAST_PICKING_DEBUG
     // hit point
diff --git a/src/slic3r/GUI/SceneRaycaster.hpp b/src/slic3r/GUI/SceneRaycaster.hpp
index 3d4473197c..99152712dd 100644
--- a/src/slic3r/GUI/SceneRaycaster.hpp
+++ b/src/slic3r/GUI/SceneRaycaster.hpp
@@ -52,7 +52,7 @@ public:
     enum class EIdBase
     {
         Bed    = 0,
-        Volume = 1000, // Must be smaller than PartPlateList::MAX_PLATES_COUNT * PartPlate::GRABBER_COUNT
+        Volume = 1000, // Must be greater than PartPlateList::MAX_PLATES_COUNT * PartPlate::GRABBER_COUNT
         Gizmo  = 1000000,
         FallbackGizmo = 2000000
     };