diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 475e2c5200..3deb18e4ca 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -7013,6 +7013,46 @@ "name": "Overture TPU @BBL X1C 0.2 nozzle", "sub_path": "filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json" }, + { + "name": "Numakers PLA+ @base", + "sub_path": "filament/Numakers/Numakers PLA+ @base.json" + }, + { + "name": "Numakers PLA+ @BBL A1", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json" + }, + { + "name": "Numakers PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL A1M", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M.json" + }, + { + "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL P1P", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P.json" + }, + { + "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL X1", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1.json" + }, + { + "name": "Numakers PLA+ @BBL X1C", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C.json" + }, + { + "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json" + }, { "name": "fdm_filament_dual_common", "sub_path": "filament/fdm_filament_dual_common.json" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..bd16229c7c --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL A1 0.2 nozzle", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS04_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json new file mode 100644 index 0000000000..a09140a00e --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL A1", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..400ba098c4 --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS05_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json new file mode 100644 index 0000000000..7f9315a2de --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL A1M", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..d50f369122 --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS03_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json new file mode 100644 index 0000000000..758096f629 --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json @@ -0,0 +1,126 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL P1P", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json new file mode 100644 index 0000000000..658217d1b7 --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json @@ -0,0 +1,108 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL X1", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS02", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..abe5b17411 --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS00_00", + "instantiation": "true", + + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json new file mode 100644 index 0000000000..683452159f --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @BBL X1C", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "GFNMKS00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json new file mode 100644 index 0000000000..aac51ebf4b --- /dev/null +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFNMK00", + "instantiation": "false", + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_vendor": [ + "Numakers" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "255" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_change_length": [ + "5" + ], + "filament_prime_volume": [ + "30" + ], + "temperature_vitrification": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json index 2d3bb9a9d3..ca80b86d12 100644 --- a/resources/profiles/OrcaFilamentLibrary.json +++ b/resources/profiles/OrcaFilamentLibrary.json @@ -692,6 +692,10 @@ "name": "Overture TPU @base", "sub_path": "filament/Overture/Overture TPU @base.json" }, + { + "name": "Numakers PLA+ @base", + "sub_path": "filament/Numakers/Numakers PLA+ @base.json" + }, { "name": "Bambu ABS @System", "sub_path": "filament/Bambu/Bambu ABS @System.json" @@ -1207,6 +1211,10 @@ { "name": "COEX PLA+Silk @System", "sub_path": "filament/COEX/COEX PLA+Silk @System.json" + }, + { + "name": "Numakers PLA+ @System", + "sub_path": "filament/Numakers/Numakers PLA+ @System.json" } ], "process_list": [], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @System.json new file mode 100644 index 0000000000..5df05ebae9 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @System", + "inherits": "Numakers PLA+ @base", + "from": "system", + "setting_id": "ONMK00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @base.json new file mode 100644 index 0000000000..43b07911c9 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/Numakers PLA+ @base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "Numakers PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OGFNMK00", + "instantiation": "false", + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Numakers" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "255" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "temperature_vitrification": [ + "55" + ] +} \ No newline at end of file