ENH: translation

Change-Id: I5eaa666073b868637ef6ee4302540375902efa5a

bbl/i18n/BambuStudio.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1920,13 +1920,13 @@ msgstr ""
 msgid "Max volumetric speed"
 msgstr ""
 
-msgid "\\u2103"
+msgid "℃"
 msgstr ""
 
 msgid "Bed temperature"
 msgstr ""
 
-msgid "mm\\u00B3"
+msgid "mm³"
 msgstr ""
 
 msgid "Start calibration"
@@ -2511,14 +2511,14 @@ msgstr ""
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -2850,6 +2850,9 @@ msgstr ""
 msgid "Avoid extrusion calibration region"
 msgstr ""
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr ""
 
@@ -5258,8 +5261,8 @@ msgstr ""
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 
@@ -5363,8 +5366,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid "Line width"
@@ -7195,9 +7198,6 @@ msgstr ""
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-msgid "mm³"
-msgstr ""
-
 msgid "Filament load time"
 msgstr ""
 
@@ -7525,6 +7525,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 
@@ -9274,10 +9280,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -9344,9 +9350,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -9450,7 +9453,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -9465,7 +9468,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 

bbl/i18n/de/BambuStudio_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2040,14 +2040,14 @@ msgstr "Druckbetttemperatur"
 msgid "Max volumetric speed"
 msgstr "Maximale Volumengeschwindigkeit"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Druckbetttemperatur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Starten"
@@ -2757,14 +2757,14 @@ msgstr "Update fehlgeschlagen."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3103,6 +3103,9 @@ msgstr "Erlaube mehrere Materialien auf einer Druckplatte"
 msgid "Avoid extrusion calibration region"
 msgstr "Vermeiden Sie den Bereich der Extrusionskalibrierung"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Hinzufügen"
 
@@ -5694,8 +5697,8 @@ msgstr "Allgemeine Geschäftsbedingungen"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Vielen Dank für den Kauf eines Bambu Lab Geräts. Bevor Sie Ihr Bambu Lab "
@@ -5845,13 +5848,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
 "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
-"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
-"\"Timelapse Wischturm\" wählen."
+"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
+">\"Timelapse Wischturm\" wählen."
 
 msgid "Line width"
 msgstr "Breite der Linie"
@@ -7958,9 +7961,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale Wischmenge im Wischturm"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Ladedauer des Filaments"
 
@@ -8333,6 +8333,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Aktivieren Sie diese Option, wenn die Maschine über ein zusätzliches "
@@ -9949,8 +9955,8 @@ msgid ""
 "No layers were detected. You might want to repair your STL file(s) or check "
 "their size or thickness and retry.\n"
 msgstr ""
-"Es wurden keine Schichten erkannt. Möglicherweise möchten Sie Ihre STL-Datei"
-"(en) reparieren oder ihre Größe oder Dicke überprüfen und es erneut "
+"Es wurden keine Schichten erkannt. Möglicherweise möchten Sie Ihre STL-"
+"Datei(en) reparieren oder ihre Größe oder Dicke überprüfen und es erneut "
 "versuchen.\n"
 
 msgid ""
@@ -10458,11 +10464,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Druckparameter"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Druckbetttyp"
@@ -10535,9 +10541,6 @@ msgstr "Von Volumengeschwindigkeit"
 msgid "To Volumetric Speed"
 msgstr "Bis Volumengeschwindigkeit"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Ergebnis der Flussdynamik-Kalibrierung"
 
@@ -10649,12 +10652,9 @@ msgstr "Schritt:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Bitte geben Sie gültige Werte ein:\n"
-"Start > 0 \\Schritt >= 0\n"
-"End > Start + Schritt)"
 
 msgid "VFA test"
 msgstr "VFA Test"
@@ -10667,12 +10667,9 @@ msgstr "Endgeschwindigkeit:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Bitte geben Sie gültige Werte ein:\n"
-"Start > 0 \\Schritt >= 0\n"
-"End > Start + Schritt)"
 
 msgid "Start retraction length: "
 msgstr "Start Rückzugslänge:"
@@ -11076,6 +11073,39 @@ msgstr ""
 "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandlinien und "
 "eine höhere Dichte der Füllung verbessern können?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Bitte geben Sie gültige Werte ein:\n"
+#~ "Start > 0 \\Schritt >= 0\n"
+#~ "End > Start + Schritt)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Bitte geben Sie gültige Werte ein:\n"
+#~ "Start > 0 \\Schritt >= 0\n"
+#~ "End > Start + Schritt)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 

bbl/i18n/en/BambuStudio_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -1989,14 +1989,14 @@ msgstr "Bed Temperature"
 msgid "Max volumetric speed"
 msgstr "Max volumetric speed"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Bed temperature"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Start"
@@ -2682,14 +2682,14 @@ msgstr "Update failed."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3028,6 +3028,9 @@ msgstr "Allow multiple materials on same plate"
 msgid "Avoid extrusion calibration region"
 msgstr "Avoid extrusion calibration region"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Add"
 
@@ -5555,8 +5558,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -5694,13 +5697,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 
 msgid "Line width"
 msgstr "Line width"
@@ -7749,9 +7752,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge on wipe tower"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament load time"
 
@@ -8120,6 +8120,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "Enable this option if the machine has an auxiliary part cooling fan"
 
@@ -10166,11 +10172,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Plate Type"
@@ -10240,9 +10246,6 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
 
@@ -10354,12 +10357,9 @@ msgstr "step:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10372,12 +10372,9 @@ msgstr "End speed:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@@ -10771,6 +10768,39 @@ msgstr ""
 "Did you know that you can use more wall loops and higher sparse infill "
 "density to improve the strength of the model?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 

bbl/i18n/es/BambuStudio_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2037,14 +2037,14 @@ msgstr "Temperatura de la base"
 msgid "Max volumetric speed"
 msgstr "Velocidad volumétrica máxima"
 
-msgid "\\u2103"
-msgstr "\\ u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Temperatura de la base"
 
-msgid "mm\\u00B3"
-msgstr "mm\\ u00b3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Iniciar"
@@ -2748,14 +2748,14 @@ msgstr "Actualización fallida."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3094,6 +3094,9 @@ msgstr "Permitir varios materiales en la misma placa"
 msgid "Avoid extrusion calibration region"
 msgstr "Evitar la zona de calibración del extrusor"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Añadir"
 
@@ -5662,8 +5665,8 @@ msgstr "Términos y condiciones"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -5806,8 +5809,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir "
 "una «Torre de purga para el timelapse» \n"
@@ -7915,9 +7918,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purga mínima en la torre de limpieza"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Tiempo de carga de filamento"
 
@@ -8291,6 +8291,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Habilite esta opción si la máquina tiene un ventilador auxiliar de "
@@ -10377,11 +10383,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Tipo de cama"
@@ -10451,9 +10457,6 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
 
@@ -10565,12 +10568,9 @@ msgstr "step:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10583,12 +10583,9 @@ msgstr "End speed:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@@ -10983,6 +10980,39 @@ msgstr ""
 "¿Sabía que puede utilizar más bucles de pared y una densidad de relleno "
 "dispersa más alta para mejorar la resistencia del modelo?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\ u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\ u00b3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Placa de Ingenieria Bambu"
 

bbl/i18n/fr/BambuStudio_fr.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2036,14 +2036,14 @@ msgstr "Température du lit"
 msgid "Max volumetric speed"
 msgstr "Vitesse volumétrique maximale"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Température du plateau"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Démarrer"
@@ -2739,14 +2739,14 @@ msgstr "Mise à jour a échoué."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3082,6 +3082,9 @@ msgstr "Autoriser plusieurs matériaux sur la même plaque"
 msgid "Avoid extrusion calibration region"
 msgstr "Éviter la région de calibration de l'extrusion"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Ajouter"
 
@@ -5675,8 +5678,8 @@ msgstr "Termes et conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Nous vous remercions d'avoir acheté un produit Bambu Lab. Avant d'utiliser "
@@ -5829,8 +5832,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour de nettoyage timelapse\".\n"
@@ -5961,9 +5964,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"être imprimé sur le plateau froid."
 
 msgid "Engineering Plate"
 msgstr "Plaque Engineering"
@@ -7065,8 +7068,8 @@ msgstr ""
 
 msgid "The prime tower is not supported in \"By object\" print."
 msgstr ""
-"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par objet"
-"\"."
+"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par "
+"objet\"."
 
 msgid ""
 "The prime tower is not supported when adaptive layer height is on. It "
@@ -7709,8 +7712,8 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-"garantir l'épaisseur verticale de la coque (couches solides supérieure"
-"+inférieure)."
+"garantir l'épaisseur verticale de la coque (couches solides "
+"supérieure+inférieure)."
 
 msgid "Internal bridge support thickness"
 msgstr "Épaisseur du support interne du pont"
@@ -7960,9 +7963,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purge minimale sur la tour de nettoyage"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Temps de chargement du filament"
 
@@ -8341,6 +8341,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Activez cette option si la machine est équipée d'un ventilateur de "
@@ -10466,11 +10472,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Type de plaque"
@@ -10540,9 +10546,6 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
 
@@ -10654,12 +10657,9 @@ msgstr "step:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10672,12 +10672,9 @@ msgstr "End speed:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@@ -11080,6 +11077,39 @@ msgstr ""
 "Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une "
 "densité de remplissage plus élevée pour améliorer la résistance du modèle ?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Plaque Engineering Bambu"
 

bbl/i18n/hu/BambuStudio_hu.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2025,14 +2025,14 @@ msgstr "Asztalhőmérséklet"
 msgid "Max volumetric speed"
 msgstr "Max. volumetrikus sebesség"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Asztalhőmérséklet"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Start"
@@ -2722,14 +2722,14 @@ msgstr "A frissítés sikertelen."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3068,6 +3068,9 @@ msgstr "Többféle anyag használata egy tálcán"
 msgid "Avoid extrusion calibration region"
 msgstr "Extrudáláskalibráció környékének elkerülése"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Hozzáadás"
 
@@ -5616,8 +5619,8 @@ msgstr "Felhasználási feltételek"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Köszönjük, hogy Bambu Lab készüléket vásároltál. Mielőtt használnád az új "
@@ -5759,8 +5762,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
 "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
@@ -7854,9 +7857,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimális tisztítás a törlőtoronyban"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament betöltési idő"
 
@@ -8228,6 +8228,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Engedélyezd ezt az opciót, ha a gép rendelkezik kiegészítő tárgyhűtő "
@@ -10313,11 +10319,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Nyomtatási paraméterek"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Tálcatípus"
@@ -10387,9 +10393,6 @@ msgstr "Ettől a volumetrikus sebességtől"
 msgid "To Volumetric Speed"
 msgstr "Eddig a volumetrikus sebességig"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Áramlásdinamikai kalibrációs eredmény"
 
@@ -10501,12 +10504,9 @@ msgstr "lépcső:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Kérjük, adj meg érvényes értékeket:\n"
-"\\lépcső>= 0\n"
-"befejező > kezdő + lépcső)"
 
 msgid "VFA test"
 msgstr "VFA teszt"
@@ -10519,12 +10519,9 @@ msgstr "Befejező sebesség:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Kérjük, adj meg érvényes értékeket:\n"
-"kezdő > 0 \\lépcső >= 0\n"
-"befejező > kezdő + lépcső)"
 
 msgid "Start retraction length: "
 msgstr "Kezdő visszahúzás hossza:"
@@ -10919,6 +10916,39 @@ msgstr ""
 "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a "
 "modell szilárdságát?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Kérjük, adj meg érvényes értékeket:\n"
+#~ "\\lépcső>= 0\n"
+#~ "befejező > kezdő + lépcső)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Kérjük, adj meg érvényes értékeket:\n"
+#~ "kezdő > 0 \\lépcső >= 0\n"
+#~ "befejező > kezdő + lépcső)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 

bbl/i18n/it/BambuStudio_it.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2022,14 +2022,14 @@ msgstr "Temperatura piano"
 msgid "Max volumetric speed"
 msgstr "Massima velocità volumetrica"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Temperatura piano"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Calibra"
@@ -2729,14 +2729,14 @@ msgstr "Aggiornamento fallito"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3075,6 +3075,9 @@ msgstr "Consenti più materiali sullo stesso piatto"
 msgid "Avoid extrusion calibration region"
 msgstr "Evitare la regione di calibrazione dell'estrusione"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Aggiungi"
 
@@ -5632,8 +5635,8 @@ msgstr "Termini e condizioni"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Grazie per aver acquistato un dispositivo Bambu Lab. Prima di utilizzare il "
@@ -5778,8 +5781,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 "aggiungere un \"Timelapse Torre di pulizia\"\n"
@@ -6676,8 +6679,8 @@ msgid ""
 msgstr ""
 "È stato rilevato un aggiornamento importante che deve essere eseguito prima "
 "che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
-"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
-"\"."
+"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
+"firmware\"."
 
 msgid ""
 "The firmware version is abnormal. Repairing and updating are required before "
@@ -7894,9 +7897,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Spurgo minimo sulla torre di pulitura"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Durata caricamento filamento"
 
@@ -8275,6 +8275,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Abilitare questa opzione se la stampante dispone di una ventola di "
@@ -10382,11 +10388,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Parametri di stampa"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Tipo di piatto"
@@ -10459,9 +10465,6 @@ msgstr "Dalla velocità volumetrica"
 msgid "To Volumetric Speed"
 msgstr "Alla velocità volumetrica"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Risultato Calibrazione Flusso Dinamica"
 
@@ -10573,12 +10576,9 @@ msgstr "passo:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Inserisci valori validi:\n"
-"avvio > 0\\ step >= 0\n"
-"fine > inizio + passo)"
 
 msgid "VFA test"
 msgstr "Test VFA"
@@ -10591,12 +10591,9 @@ msgstr "Velocità finale:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Inserisci valori validi:\n"
-"avvio > 0\\ step >= 0\n"
-"fine > inizio + passo)"
 
 msgid "Start retraction length: "
 msgstr "Lunghezza iniziale retrazione:"
@@ -10994,6 +10991,39 @@ msgstr ""
 "Sapevate che è possibile utilizzare un maggior numero di anelli a parete e "
 "una maggiore densità riempimento per migliorare la resistenza del modello?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Inserisci valori validi:\n"
+#~ "avvio > 0\\ step >= 0\n"
+#~ "fine > inizio + passo)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Inserisci valori validi:\n"
+#~ "avvio > 0\\ step >= 0\n"
+#~ "fine > inizio + passo)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
@@ -12405,8 +12435,8 @@ msgstr ""
 #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 #~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
 #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
-#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
-#~ "\"».\n"
+#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
+#~ "pulizia\"».\n"
 
 #~ msgid ""
 #~ "When sparse infill density is low, the internal solid infill or internal "

bbl/i18n/ja/BambuStudio_ja.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -1968,14 +1968,14 @@ msgstr "ベッド温度"
 msgid "Max volumetric speed"
 msgstr "最大体積速度"
 
-msgid "\\u2103"
-msgstr "u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "ベッド温度"
 
-msgid "mm\\u00B3"
-msgstr "mmu00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "開始"
@@ -2621,14 +2621,14 @@ msgstr "更新が失敗しました。"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -2966,6 +2966,9 @@ msgstr "一つのプレートに複数の材料を使用可能"
 msgid "Avoid extrusion calibration region"
 msgstr "押出しキャリブレーション領域を避ける"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "追加"
 
@@ -5448,8 +5451,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -5582,8 +5585,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
 "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
@@ -7547,9 +7550,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "プライムタワー上最小フラッシュ量"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "フィラメントロード時間"
 
@@ -7898,6 +7898,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "パーツ補助冷却ファンがある場合有効にしてください"
 
@@ -9875,11 +9881,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Plate Type"
@@ -9949,9 +9955,6 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
 
@@ -10063,12 +10066,9 @@ msgstr "step:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10081,12 +10081,9 @@ msgstr "End speed:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@@ -10452,6 +10449,39 @@ msgstr ""
 "強度の向上\n"
 "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。"
 
+#~ msgid "\\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mmu00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu エンジニアリングプレート"
 

bbl/i18n/ko/BambuStudio_ko.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1977,14 +1977,14 @@ msgstr "베드 온도"
 msgid "Max volumetric speed"
 msgstr "최대 체적 속도"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "베드 온도"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "시작"
@@ -2655,14 +2655,14 @@ msgstr "업데이트 실패"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3001,6 +3001,9 @@ msgstr "동일한 플레이트 상에 여러 재료 허용"
 msgid "Avoid extrusion calibration region"
 msgstr ""
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "추가"
 
@@ -5508,8 +5511,8 @@ msgstr "이용약관"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Bambu Lab 기기를 구매해 주셔서 감사합니다. Bambu Lab 기기를 사용하기 전에 이"
@@ -5641,8 +5644,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋"
 "습니다. \n"
@@ -7648,9 +7651,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "와이프타워에 최소 짜내기"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "필라멘트 로드 시간"
 
@@ -8010,6 +8010,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "프린터에 보조 냉각 팬이 있는 경우 이 옵션을 활성화하십시오."
 
@@ -10009,11 +10015,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Printing Parameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "플레이트 유형"
@@ -10083,9 +10089,6 @@ msgstr "From Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "To Volumetric Speed"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Flow Dynamics Calibration Result"
 
@@ -10197,12 +10200,9 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10215,12 +10215,9 @@ msgstr "End speed:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Please input valid values:\n"
-"start > 0 \\step >= 0\n"
-"end > start + step)"
 
 msgid "Start retraction length: "
 msgstr "Start retraction length:"
@@ -10611,6 +10608,39 @@ msgstr ""
 "더 많은 벽 루프와 더 높은 내부채움 밀도를 사용하여 모델의 강도를 높일 수 있다"
 "는 사실을 알고 계셨습니까?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 

bbl/i18n/nl/BambuStudio_nl.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2040,14 +2040,14 @@ msgstr "Bed Temperatuur"
 msgid "Max volumetric speed"
 msgstr "Maximale volumetrische snelheid"
 
-msgid "\\u2103"
-msgstr "\\ u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Printbed temperatuur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Starten"
@@ -2744,14 +2744,14 @@ msgstr "Updaten mislukt."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3090,6 +3090,9 @@ msgstr "Sta verschillende materiaalsoorten op hetzelfde printbed toe"
 msgid "Avoid extrusion calibration region"
 msgstr "Vermijd het extrusie kalibratie gebied"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Toevoegen"
 
@@ -5675,8 +5678,8 @@ msgstr "Algemene voorwaarden"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Bedankt voor de aanschaf van een Bambu Lab-apparaat. Lees de algemene "
@@ -5824,8 +5827,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
 "„Timelapse Wipe Tower” toe te voegen \n"
@@ -7941,9 +7944,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale filament reiniging op de wipe tower"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament laadt tijd"
 
@@ -8320,6 +8320,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 "Schakel deze optie in als de machine een ventilator voor de enclosure heeft"
@@ -10434,11 +10440,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Afdrukparameters"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Bedtype"
@@ -10509,9 +10515,6 @@ msgstr "Van Volumetric Speed"
 msgid "To Volumetric Speed"
 msgstr "Naar volumetrische snelheid"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Kalibratieresultaat van Flow Dynamics"
 
@@ -10623,12 +10626,9 @@ msgstr "stap:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Voer geldige waarden in:\n"
-"start > 0 \\step >= 0\n"
-"einde > begin + stap)"
 
 msgid "VFA test"
 msgstr "VFA-test"
@@ -10641,12 +10641,9 @@ msgstr "Eindsnelheid:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Voer geldige waarden in:\n"
-"start > 0 \\step >= 0\n"
-"einde > begin + stap)"
 
 msgid "Start retraction length: "
 msgstr "Begin terugtreklengte:"
@@ -11042,6 +11039,39 @@ msgstr ""
 "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt "
 "gebruiken om de sterkte van het model te verbeteren?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\ u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Voer geldige waarden in:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "einde > begin + stap)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Voer geldige waarden in:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "einde > begin + stap)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering (technische) plate"
 

bbl/i18n/sv/BambuStudio_sv.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2004,14 +2004,14 @@ msgstr "Byggplattans temperatur"
 msgid "Max volumetric speed"
 msgstr "Max volymetrisk hastighet"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Byggplattans temperatur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Starta"
@@ -2699,14 +2699,14 @@ msgstr "Uppdatering misslyckades."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3045,6 +3045,9 @@ msgstr "Tillåt multipla material på samma byggplatta"
 msgid "Avoid extrusion calibration region"
 msgstr "Undvik kalibrerings området"
 
+msgid "Align to Y axis"
+msgstr ""
+
 msgid "Add"
 msgstr "Lägg till"
 
@@ -5578,8 +5581,8 @@ msgstr "Villkor och bestämmelser"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu Lab "
@@ -5722,8 +5725,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
 "till ett \"Timelapse Wipe Tower\".\n"
@@ -7416,9 +7419,9 @@ msgid ""
 "quality for needle and small details"
 msgstr ""
 "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
-"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
-"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
-"kylnings kvaliteten för små detaljer"
+"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
+"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
+"förbättra kylnings kvaliteten för små detaljer"
 
 msgid "Normal printing"
 msgstr "Normal utskrift"
@@ -7770,9 +7773,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge på wipe torn"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Inmatningstid för filament"
 
@@ -8141,6 +8141,12 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr ""
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr ""
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "Aktivera detta val om maskinen har extra kylfläkt"
 
@@ -9028,8 +9034,8 @@ msgid ""
 "interface is Concentric"
 msgstr ""
 "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt "
-"(material) support gränssnittet är Räta medan standardmönstret för lösligt"
-"(material) stödgränssnittet är koncentriskt"
+"(material) support gränssnittet är Räta medan standardmönstret för "
+"lösligt(material) stödgränssnittet är koncentriskt"
 
 msgid "Rectilinear Interlaced"
 msgstr "Rätlinjig sammanflätning"
@@ -10203,11 +10209,11 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Parametrar för utskrift"
 
-msgid "- \\u2103"
-msgstr "- u2103"
+msgid "- ℃"
+msgstr ""
 
-msgid " \\u2103"
-msgstr "u2103"
+msgid " ℃"
+msgstr ""
 
 msgid "Plate Type"
 msgstr "Typ av byggplatta"
@@ -10277,9 +10283,6 @@ msgstr "Från volymetrisk hastighet"
 msgid "To Volumetric Speed"
 msgstr "Till volymetrisk hastighet"
 
-msgid "mm\\u00B3/s"
-msgstr "mm\\u00B3/s"
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "Resultat för kalibrering av flödesdynamik"
 
@@ -10391,12 +10394,9 @@ msgstr "steg:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Vänligen ange giltiga värden:\n"
-"start > 0 \\steg >= 0\n"
-"slut > start + steg)"
 
 msgid "VFA test"
 msgstr "VFA test"
@@ -10409,12 +10409,9 @@ msgstr "Sluthastighet:"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"Vänligen ange giltiga värden:\n"
-"start > 0 \\steg >= 0\n"
-"slut > start + steg)"
 
 msgid "Start retraction length: "
 msgstr "Starta retractions längd:"
@@ -10809,6 +10806,39 @@ msgstr ""
 "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet "
 "för att förbättra modellens styrka?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
+#~ msgid "- \\u2103"
+#~ msgstr "- u2103"
+
+#~ msgid " \\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3/s"
+#~ msgstr "mm\\u00B3/s"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Vänligen ange giltiga värden:\n"
+#~ "start > 0 \\steg >= 0\n"
+#~ "slut > start + steg)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Vänligen ange giltiga värden:\n"
+#~ "start > 0 \\steg >= 0\n"
+#~ "slut > start + steg)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 

bbl/i18n/zh_cn/BambuStudio_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-18 09:14+0800\n"
+"POT-Creation-Date: 2023-09-18 14:47+0800\n"
 "PO-Revision-Date: 2023-09-18 09:18+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -828,7 +828,7 @@ msgid "Cone"
 msgstr "锥体"
 
 msgid "Disc"
-msgstr ""
+msgstr "小圆片"
 
 msgid "Bambu Cube"
 msgstr "Bambu方块"
@@ -1533,7 +1533,7 @@ msgid "Feed Filament"
 msgstr "进料"
 
 msgid "Confirm extruded"
-msgstr ""
+msgstr "确认挤出"
 
 msgid "Check filament location"
 msgstr "检查耗材位置"
@@ -1617,10 +1617,10 @@ msgid "Filling bed "
 msgstr "填充热床"
 
 msgid "Bed filling canceled."
-msgstr "填充热床已取消。"
+msgstr "已取消铺满打印板"
 
 msgid "Bed filling done."
-msgstr "填充热床已完成。"
+msgstr "已完成铺满打印板"
 
 msgid "Error! Unable to create thread!"
 msgstr "发生错误，无法创建线程。"
@@ -1942,14 +1942,14 @@ msgstr "热床温度"
 msgid "Max volumetric speed"
 msgstr "最大体积速度"
 
-msgid "\\u2103"
+msgid "℃"
 msgstr ""
 
 msgid "Bed temperature"
 msgstr "床温"
 
-msgid "mm\\u00B3"
-msgstr ""
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "开始"
@@ -2528,13 +2528,13 @@ msgid "Filament unloading"
 msgstr "打印丝退料中"
 
 msgid "Skip step pause"
-msgstr ""
+msgstr "丟步暂停"
 
 msgid "Filament loading"
 msgstr "打印丝进料中"
 
 msgid "Motor noise calibration"
-msgstr ""
+msgstr "电机噪音标定"
 
 msgid "Paused due to AMS lost"
 msgstr ""
@@ -2592,8 +2592,8 @@ msgstr "更新失败。"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 "当前打印机腔内温度或者目标腔内温度超过了45度，为了避免挤出机堵塞，不允许加载"
 "低温打印丝（PLA/PETG/TPU)"
@@ -2601,7 +2601,7 @@ msgstr ""
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 "挤出机内装入低温长丝(PLA/PETG/TPU)。为了避免挤出机堵塞，不允许将打印机腔内温"
 "度设置在45度以上。"
@@ -2939,6 +2939,9 @@ msgstr "允许同一盘中包含多种材料"
 msgid "Avoid extrusion calibration region"
 msgstr "避开挤出校准区域"
 
+msgid "Align to Y axis"
+msgstr "对齐到Y轴"
+
 msgid "Add"
 msgstr "添加"
 
@@ -3780,7 +3783,7 @@ msgid "Clear"
 msgstr "清除"
 
 msgid "Rating"
-msgstr ""
+msgstr "评分"
 
 msgid "Camera"
 msgstr "摄像机"
@@ -3905,7 +3908,7 @@ msgid "Delete Photo"
 msgstr ""
 
 msgid "Submit"
-msgstr ""
+msgstr "提交"
 
 msgid "Please click on the star first."
 msgstr ""
@@ -4104,7 +4107,7 @@ msgid "Export successfully."
 msgstr "发送成功。"
 
 msgid "Model file downloaded."
-msgstr ""
+msgstr "已下载模型文件。"
 
 msgid "Serious warning:"
 msgstr "严重警告："
@@ -5386,8 +5389,8 @@ msgstr "用户使用协议"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "感谢您购买Bambu Lab设备，使用Bambu Lab设备前，请阅读一下条款，单击同意使用您"
@@ -5512,8 +5515,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
 "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
@@ -7124,10 +7127,10 @@ msgid "Default process profile when switch to this machine profile"
 msgstr "该机器的默认切片配置"
 
 msgid "Activate air filtration"
-msgstr ""
+msgstr "空气过滤增强"
 
 msgid "Activate for better air filtration"
-msgstr ""
+msgstr "开启后获得更好的过滤效果"
 
 msgid "Fan speed"
 msgstr "风扇速度"
@@ -7135,10 +7138,10 @@ msgstr "风扇速度"
 msgid ""
 "Speed of exhuast fan during printing.This speed will overwrite the speed in "
 "filament custom gcode"
-msgstr ""
+msgstr "打印时排气风扇的速度。该速度将覆盖材料自定义start Gcode中的速度。"
 
 msgid "Speed of exhuast fan after printing completes"
-msgstr ""
+msgstr "打印结束后排气扇的速度。"
 
 msgid "No cooling for the first"
 msgstr "关闭冷却对前"
@@ -7421,9 +7424,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "擦拭塔上的最小清理量"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "加载耗材丝的时间"
 
@@ -7737,10 +7737,10 @@ msgid "Brass"
 msgstr "黄铜"
 
 msgid "Printer structure"
-msgstr ""
+msgstr "打印机构型"
 
 msgid "The physical arrangement and components of a printing device"
-msgstr ""
+msgstr "打印机的物理结构"
 
 msgid "CoreXY"
 msgstr ""
@@ -7754,21 +7754,27 @@ msgstr ""
 msgid "Delta"
 msgstr ""
 
+msgid "Best object position"
+msgstr "最佳对象位置"
+
+msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
+msgstr "相对于热床尺寸的最佳自动摆放位置，范围为[0,1]。"
+
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "如果机器有辅助部件冷却风扇，勾选该选项"
 
 msgid "Support control chamber temperature"
-msgstr ""
+msgstr "支持腔温控制"
 
 msgid ""
 "This option is enabled if machine support controlling chamber temperature"
-msgstr ""
+msgstr "此选项在支持腔温控制时启用"
 
 msgid "Support air filtration"
-msgstr ""
+msgstr "支持空气过滤增强"
 
 msgid "Enable this if printer support air filtration"
-msgstr ""
+msgstr "如果打印机支持空气过滤，请启用此选项"
 
 msgid "G-code flavor"
 msgstr "G-code风格"
@@ -9146,10 +9152,10 @@ msgstr ""
 "trace\n"
 
 msgid "Load custom gcode"
-msgstr ""
+msgstr "加载自定义 gcode"
 
 msgid "Load custom gcode from json"
-msgstr ""
+msgstr "从 json 中加载自定义 gcode"
 
 msgid "Error in zip archive"
 msgstr "zip文件中存在错误"
@@ -9662,10 +9668,10 @@ msgstr "将打印一份测试模型。在校准之前，请清理打印平台并
 msgid "Printing Parameters"
 msgstr "打印参数"
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -9735,9 +9741,6 @@ msgstr "从体积速度"
 msgid "To Volumetric Speed"
 msgstr "至体积速度"
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "动态流量校准结果"
 
@@ -9849,11 +9852,11 @@ msgstr "值步长"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 "请输入有效值:\n"
-"起始值 > 0 \\值步长 >= 0\n"
+"起始值 > 0，值步长 >= 0\n"
 "结束值 > 起始值 + 值步长)"
 
 msgid "VFA test"
@@ -9867,11 +9870,11 @@ msgstr "结束速度"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 "请输入有效值:\n"
-"起始值 > 0 \\值步长 >= 0\n"
+"起始值 > 0，值步长 >= 0\n"
 "结束值 > 起始值 + 值步长)"
 
 msgid "Start retraction length: "
@@ -9884,16 +9887,16 @@ msgid "mm/mm"
 msgstr "毫米/毫米"
 
 msgid "Network lookup"
-msgstr ""
+msgstr "网络寻找"
 
 msgid "Address"
-msgstr ""
+msgstr "地址"
 
 msgid "Hostname"
-msgstr ""
+msgstr "主机名"
 
 msgid "Service name"
-msgstr ""
+msgstr "服务名"
 
 msgid "OctoPrint version"
 msgstr ""
@@ -9905,7 +9908,7 @@ msgid "Finished"
 msgstr "完成"
 
 msgid "Send to print"
-msgstr ""
+msgstr "发送打印"
 
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
@@ -10244,6 +10247,40 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
 
+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "当前打印机腔内温度或者目标腔内温度超过了45度，为了避免挤出机堵塞，不允许加"
+#~ "载低温打印丝（PLA/PETG/TPU)"
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "挤出机内装入低温长丝(PLA/PETG/TPU)。为了避免挤出机堵塞，不允许将打印机腔内"
+#~ "温度设置在45度以上。"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "工程材料打印板"
 
@@ -14422,8 +14459,8 @@ msgstr ""
 #~ msgstr "正在准备设置页"
 
 #~ msgid ""
-#~ "You have the following presets with saved options for \"Print Host upload"
-#~ "\""
+#~ "You have the following presets with saved options for \"Print Host "
+#~ "upload\""
 #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
 
 #~ msgid ""