Merge branch 'master-remote' into feature/merge_remote_1.3

# Conflicts:
#	bbl/i18n/zh_cn/BambuStudio_zh_CN.po
#	resources/i18n/zh_cn/BambuStudio.mo
#	resources/profiles/Voron.json
#	resources/profiles/Voron/filament/Voron Generic ABS.json
#	resources/profiles/Voron/filament/Voron Generic ASA.json
#	resources/profiles/Voron/filament/Voron Generic PA-CF.json
#	resources/profiles/Voron/filament/Voron Generic PA.json
#	resources/profiles/Voron/filament/Voron Generic PC.json
#	resources/profiles/Voron/filament/Voron Generic PETG.json
#	resources/profiles/Voron/filament/Voron Generic PLA-CF.json
#	resources/profiles/Voron/filament/Voron Generic PLA.json
#	resources/profiles/Voron/filament/Voron Generic PVA.json
#	resources/profiles/Voron/filament/Voron Generic TPU.json
#	resources/profiles/Voron/filament/fdm_filament_abs.json
#	resources/profiles/Voron/filament/fdm_filament_asa.json
#	resources/profiles/Voron/filament/fdm_filament_common.json
#	resources/profiles/Voron/filament/fdm_filament_pa.json
#	resources/profiles/Voron/filament/fdm_filament_pc.json
#	resources/profiles/Voron/filament/fdm_filament_pet.json
#	resources/profiles/Voron/filament/fdm_filament_pla.json
#	resources/profiles/Voron/filament/fdm_filament_pva.json
#	resources/profiles/Voron/filament/fdm_filament_tpu.json
#	resources/profiles/Voron/machine/Voron 0.1 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 0.1.json
#	resources/profiles/Voron/machine/Voron 2.4 250 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 250.json
#	resources/profiles/Voron/machine/Voron 2.4 300 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 300.json
#	resources/profiles/Voron/machine/Voron 2.4 350 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 350.json
#	resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 250.json
#	resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 300.json
#	resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 350.json
#	resources/profiles/Voron/machine/fdm_klipper_common.json
#	resources/profiles/Voron/process/0.08mm Extra Fine @Voron.json
#	resources/profiles/Voron/process/0.12mm Fine @Voron.json
#	resources/profiles/Voron/process/0.15mm Optimal @Voron.json
#	resources/profiles/Voron/process/0.20mm Standard @Voron.json
#	resources/profiles/Voron/process/0.24mm Draft @Voron.json
#	resources/profiles/Voron/process/0.28mm Extra Draft @Voron.json
#	resources/profiles/Voron/process/fdm_process_voron_common.json
#	src/libslic3r/Preset.cpp
#	src/libslic3r/PrintConfig.cpp
#	src/libslic3r/PrintConfig.hpp
#	src/libslic3r/PrintObject.cpp
#	src/slic3r/GUI/BackgroundSlicingProcess.cpp
#	src/slic3r/GUI/Field.cpp
#	src/slic3r/GUI/GLToolbar.cpp
#	src/slic3r/GUI/GLToolbar.hpp
#	src/slic3r/GUI/MainFrame.cpp
#	src/slic3r/GUI/MainFrame.hpp
#	src/slic3r/GUI/NotificationManager.cpp
#	src/slic3r/GUI/PhysicalPrinterDialog.cpp
#	src/slic3r/GUI/PhysicalPrinterDialog.hpp
#	src/slic3r/GUI/Plater.cpp
#	src/slic3r/GUI/Plater.hpp
#	src/slic3r/GUI/PrintHostDialogs.cpp
#	src/slic3r/GUI/PrintHostDialogs.hpp
#	src/slic3r/Utils/PrintHost.cpp
This commit is contained in:
SoftFever 2022-10-20 23:12:00 +08:00
commit 35455e6533
278 changed files with 14888 additions and 2414 deletions

View file

@ -36,6 +36,7 @@ static const float DEFAULT_TRAVEL_ACCELERATION = 1250.0f;
static const size_t MIN_EXTRUDERS_COUNT = 5;
static const float DEFAULT_FILAMENT_DIAMETER = 1.75f;
static const float DEFAULT_FILAMENT_DENSITY = 1.245f;
static const int DEFAULT_FILAMENT_VITRIFICATION_TEMPERATURE = 0;
static const Slic3r::Vec3f DEFAULT_EXTRUDER_OFFSET = Slic3r::Vec3f::Zero();
namespace Slic3r {
@ -776,6 +777,7 @@ void GCodeProcessorResult::reset() {
filament_diameters = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DIAMETER);
filament_densities = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DENSITY);
custom_gcode_per_print_z = std::vector<CustomGCode::Item>();
warnings.clear();
//BBS: add mutex for protection of gcode result
unlock();
@ -877,6 +879,7 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
m_extruder_colors.resize(extruders_count);
m_result.filament_diameters.resize(extruders_count);
m_result.filament_densities.resize(extruders_count);
m_result.filament_vitrification_temperature.resize(extruders_count);
m_extruder_temps.resize(extruders_count);
for (size_t i = 0; i < extruders_count; ++ i) {
@ -884,6 +887,7 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
m_extruder_colors[i] = static_cast<unsigned char>(i);
m_result.filament_diameters[i] = static_cast<float>(config.filament_diameter.get_at(i));
m_result.filament_densities[i] = static_cast<float>(config.filament_density.get_at(i));
m_result.filament_vitrification_temperature[i] = static_cast<float>(config.temperature_vitrification.get_at(i));
}
if (m_flavor == gcfMarlinLegacy || m_flavor == gcfMarlinFirmware) {
@ -985,6 +989,20 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
m_result.filament_densities.emplace_back(DEFAULT_FILAMENT_DENSITY);
}
}
//BBS
const ConfigOptionInts* filament_vitrification_temperature = config.option<ConfigOptionInts>("temperature_vitrification");
if (filament_vitrification_temperature != nullptr) {
m_result.filament_vitrification_temperature.clear();
m_result.filament_vitrification_temperature.resize(filament_vitrification_temperature->values.size());
for (size_t i = 0; i < filament_vitrification_temperature->values.size(); ++i) {
m_result.filament_vitrification_temperature[i] = static_cast<int>(filament_vitrification_temperature->values[i]);
}
}
if (m_result.filament_vitrification_temperature.size() < m_result.extruders_count) {
for (size_t i = m_result.filament_vitrification_temperature.size(); i < m_result.extruders_count; ++i) {
m_result.filament_vitrification_temperature.emplace_back(DEFAULT_FILAMENT_VITRIFICATION_TEMPERATURE);
}
}
const ConfigOptionPoints* extruder_offset = config.option<ConfigOptionPoints>("extruder_offset");
const ConfigOptionBool* single_extruder_multi_material = config.option<ConfigOptionBool>("single_extruder_multi_material");
@ -1198,6 +1216,7 @@ void GCodeProcessor::reset()
for (size_t i = 0; i < MIN_EXTRUDERS_COUNT; ++i) {
m_extruder_temps[i] = 0.0f;
}
m_highest_bed_temp = 0;
m_extruded_last_z = 0.0f;
m_zero_layer_height = 0.0f;
@ -1363,6 +1382,8 @@ void GCodeProcessor::finalize(bool post_process)
#if ENABLE_GCODE_VIEWER_STATISTICS
m_result.time = std::chrono::duration_cast<std::chrono::milliseconds>(std::chrono::high_resolution_clock::now() - m_start_time).count();
#endif // ENABLE_GCODE_VIEWER_STATISTICS
//BBS: update slice warning
update_slice_warnings();
}
float GCodeProcessor::get_time(PrintEstimatedStatistics::ETimeMode mode) const
@ -1652,6 +1673,16 @@ void GCodeProcessor::process_gcode_line(const GCodeReader::GCodeLine& line, bool
default: break;
}
break;
case '4':
switch (cmd[3]) {
case '0': { process_M140(line); break; } // Set bed temperature
default: break;
}
case '9':
switch (cmd[3]) {
case '0': { process_M190(line); break; } // Wait bed temperature
default: break;
}
default:
break;
}
@ -3427,6 +3458,21 @@ void GCodeProcessor::process_M135(const GCodeReader::GCodeLine& line)
process_T(cmd.substr(pos));
}
void GCodeProcessor::process_M140(const GCodeReader::GCodeLine& line)
{
float new_temp;
if (line.has_value('S', new_temp))
m_highest_bed_temp = m_highest_bed_temp < (int)new_temp ? (int)new_temp : m_highest_bed_temp;
}
void GCodeProcessor::process_M190(const GCodeReader::GCodeLine& line)
{
float new_temp;
if (line.has_value('S', new_temp))
m_highest_bed_temp = m_highest_bed_temp < (int)new_temp ? (int)new_temp : m_highest_bed_temp;
}
void GCodeProcessor::process_M201(const GCodeReader::GCodeLine& line)
{
// see http://reprap.org/wiki/G-code#M201:_Set_max_printing_acceleration
@ -3848,6 +3894,15 @@ float GCodeProcessor::get_filament_unload_time(size_t extruder_id)
return m_time_processor.extruder_unloaded ? 0.0f : m_time_processor.filament_unload_times;
}
//BBS
int GCodeProcessor::get_filament_vitrification_temperature(size_t extrude_id)
{
if (extrude_id < m_result.filament_vitrification_temperature.size())
return m_result.filament_vitrification_temperature[extrude_id];
else
return 0;
}
void GCodeProcessor::process_custom_gcode_time(CustomGCode::Type code)
{
for (size_t i = 0; i < static_cast<size_t>(PrintEstimatedStatistics::ETimeMode::Count); ++i) {
@ -3909,5 +3964,36 @@ void GCodeProcessor::update_estimated_times_stats()
m_result.print_statistics.used_filaments_per_role = m_used_filaments.filaments_per_role;
}
//BBS: ugly code...
void GCodeProcessor::update_slice_warnings()
{
m_result.warnings.clear();
auto get_used_extruders = [this]() {
std::vector<size_t> used_extruders;
used_extruders.reserve(m_used_filaments.volumes_per_extruder.size());
for (auto item : m_used_filaments.volumes_per_extruder) {
used_extruders.push_back(item.first);
}
return used_extruders;
};
auto used_extruders = get_used_extruders();
assert(!used_extruders.empty());
if (m_highest_bed_temp != 0) {
for (size_t i = 0; i < used_extruders.size(); i++) {
int temperature = get_filament_vitrification_temperature(used_extruders[i]);
if (temperature != 0 && m_highest_bed_temp > temperature) {
GCodeProcessorResult::SliceWarning warning;
warning.level = 1;
warning.msg = BED_TEMP_TOO_HIGH_THAN_FILAMENT;
m_result.warnings.emplace_back(std::move(warning));
}
}
}
m_result.warnings.shrink_to_fit();
}
} /* namespace Slic3r */