From 34bf4f69740a9c059744254d4daa1d4646581174 Mon Sep 17 00:00:00 2001 From: cochcoder <103969142+cochcoder@users.noreply.github.com> Date: Sat, 30 Mar 2024 13:11:42 -0400 Subject: [PATCH] Change line_width for Ender-3 S1 Plus --- ....16mm Optimal @Creality Ender3S1Plus 0.2.json | 16 ++++++++-------- ....16mm Optimal @Creality Ender3S1Plus 0.4.json | 2 +- ....16mm Optimal @Creality Ender3S1Plus 0.6.json | 16 ++++++++-------- ....16mm Optimal @Creality Ender3S1Plus 0.8.json | 16 ++++++++-------- ...20mm Standard @Creality Ender3S1Plus 0.2.json | 16 ++++++++-------- ...20mm Standard @Creality Ender3S1Plus 0.6.json | 16 ++++++++-------- ...20mm Standard @Creality Ender3S1Plus 0.8.json | 16 ++++++++-------- .../0.24mm Draft @Creality Ender3S1Plus 0.2.json | 16 ++++++++-------- .../0.24mm Draft @Creality Ender3S1Plus 0.6.json | 16 ++++++++-------- .../0.24mm Draft @Creality Ender3S1Plus 0.8.json | 16 ++++++++-------- 10 files changed, 73 insertions(+), 73 deletions(-) diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json index 02c6ca2b97..e38e4c4089 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.25", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.25", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.22", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.25", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.25", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.25", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.18", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json index 99e42c2e21..45ca5389c6 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.45", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json index 7ced645cdf..0bd95f7ac4 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.65", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.65", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.65", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.65", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.65", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.58", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json index 8df4a85ac1..bcd0c9d992 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.85", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.85", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.85", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.85", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.85", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.78", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.8", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json index c91ce87e47..fbb57bcb08 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.25", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.25", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.22", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.25", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.25", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.2", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.18", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.2", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json index 6fa24ba5d5..57f9f6c6a1 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.65", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.65", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.65", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.65", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.6", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.58", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.6", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json index 12aa910763..2562ed334b 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.85", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.85", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.85", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.85", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "2", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.8", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.78", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.8", "top_shell_layers": "7", "top_shell_thickness": "0.8", "initial_layer_speed": "35%", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json index 9e5f90cf88..fec5ce6f54 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.25", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.25", "infill_direction": "45", "sparse_infill_density": "10%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.22", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.25", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.25", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "1", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.2", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.18", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.2", "top_shell_layers": "4", "top_shell_thickness": "0.8", "initial_layer_speed": "20", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json index 29493e1541..6961aa3c67 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.65", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.65", "infill_direction": "45", "sparse_infill_density": "10%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.65", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.65", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "1", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.6", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.58", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.6", "top_shell_layers": "4", "top_shell_thickness": "0.8", "initial_layer_speed": "20", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json index be87b75246..aa5bac7b5c 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json @@ -24,19 +24,19 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.45", + "outer_wall_line_width": "0.85", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.85", "infill_direction": "45", "sparse_infill_density": "10%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", + "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.2", "infill_combination": "1", - "sparse_infill_line_width": "0.45", + "sparse_infill_line_width": "0.85", "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", @@ -50,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.85", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -59,7 +59,7 @@ "skirt_height": "2", "skirt_loops": "1", "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", + "internal_solid_infill_line_width": "0.8", "spiral_mode": "0", "standby_temperature_delta": "-5", "enable_support": "0", @@ -69,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.15", "support_filament": "0", - "support_line_width": "0.38", + "support_line_width": "0.78", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -85,7 +85,7 @@ "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.8", "top_shell_layers": "4", "top_shell_thickness": "0.8", "initial_layer_speed": "20",