diff --git a/doc/print_settings/quality/quality_settings_line_width.md b/doc/print_settings/quality/quality_settings_line_width.md
index 8e393a5920..087716a046 100644
--- a/doc/print_settings/quality/quality_settings_line_width.md
+++ b/doc/print_settings/quality/quality_settings_line_width.md
@@ -30,7 +30,8 @@ Fallback value used when a specific line width is not set (set to `0`).
 
 ### First Layer
 
-A wider first layer (with a higher [first layer height](quality_settings_layer_height#first-layer-height)) improves bed adhesion and compensates for uneven build surfaces.
+A wider first layer (with a higher [first layer height](quality_settings_layer_height#first-layer-height)) improves bed adhesion and compensates for uneven build surfaces.  
+First layer line width also overrides [Brim's](others_settings_brim) and [Skirt's](others_settings_skirt) line width.
 
 ### Outer Wall
 
diff --git a/doc/print_settings/quality/quality_settings_precision.md b/doc/print_settings/quality/quality_settings_precision.md
index c5a8682241..58a47ef893 100644
--- a/doc/print_settings/quality/quality_settings_precision.md
+++ b/doc/print_settings/quality/quality_settings_precision.md
@@ -61,6 +61,33 @@ To mitigate this effect, OrcaSlicer allows you to specify a negative distance th
 
 ![elephant-foot-compensation](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/Precision/elephant-foot-compensation.png?raw=true)
 
+The compensation works as follows:  
+When the `current_layer` is <= `input_compensation_layers`
+```c++
+compensation = input_compensation_distance - (input_compensation_distance / input_compensation_layers) × (current_layer - 1)
+```
+According to the equation, we can establish the following rules:
+- In the 1st layer, since it is layer `1 - 1 = 0`, compensation is 100%.
+- The intermediate layers (between the first and input_compensation_layers) will have linear compensation.
+- Layers above the specified amount will not be compensated.
+
+Assuming the compensation value is 0.25 mm:
+
+- Elephant Foot Compensation Layers = 1 :
+  - 1st layer: `0.25mm` compensation (100%)
+  - 2nd layer and beyond: No compensation (0 mm)
+- Elephant Foot Compensation Layers = 2 :
+  - 1st layer: `0.25mm` compensation (100%)
+  - 2nd layer: `0.25 − (0.25 / 2) × (2 - 1) = 0.125mm` compensation (50%)
+  - 3rd layer and beyond: No compensation (0 mm).
+- Elephant Foot Compensation Layers = 5 :
+  - 1st layer: `0.25mm` compensation (100%)
+  - 2nd layer: `0.25 − (0.25 / 5) × (2 - 1) = 0.2mm` compensation (80%)
+  - 3rd layer: `0.25 − (0.25 / 5) × (3 - 1) = 0.15mm` compensation (60%)
+  - 4th layer: `0.25 − (0.25 / 5) × (4 - 1) = 0.1mm` compensation (40%)
+  - 5th layer: `0.25 − (0.25 / 5) × (5 - 1) = 0.05mm` compensation (20%)
+  - 6th layer and beyond: No compensation (0 mm).
+
 ## Precise wall
 
 The 'Precise Wall' is a distinctive feature introduced by OrcaSlicer, aimed at improving the dimensional accuracy of prints and minimizing layer inconsistencies by slightly increasing the spacing between the outer wall and the inner wall when printing in [Inner Outer wall order](quality_settings_wall_and_surfaces#innerouter).