diff --git a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
index a85e682cd0..c280908ba7 100644
--- a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
+++ b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
@@ -19,8 +19,9 @@
       "0.4"
   ],
   "thumbnails": [
-    "380x380/ColPic",
-    "210x210/ColPic"
+    "380x380/COLPIC",
+    "210x210/COLPIC",
+    "110x110/PNG"
   ],
   "machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM191 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",