diff --git a/resources/profiles/BBL/cli_config.json b/resources/profiles/BBL/cli_config.json index 6213789dfb..5dc90b7aea 100644 --- a/resources/profiles/BBL/cli_config.json +++ b/resources/profiles/BBL/cli_config.json @@ -26,7 +26,8 @@ "Bambu Lab X1E 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab A1 0.4 nozzle": [ "Bambu Lab P1S 0.4 nozzle", @@ -35,7 +36,8 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab A1 0.6 nozzle": [ "Bambu Lab P1S 0.6 nozzle", @@ -44,7 +46,8 @@ "Bambu Lab X1E 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab A1 0.8 nozzle": [ "Bambu Lab P1S 0.8 nozzle", @@ -53,7 +56,8 @@ "Bambu Lab X1E 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -82,7 +86,8 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab A1 mini 0.4 nozzle": [ "Bambu Lab P1S 0.4 nozzle", @@ -90,7 +95,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab A1 mini 0.6 nozzle": [ "Bambu Lab P1S 0.6 nozzle", @@ -98,7 +104,8 @@ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab A1 mini 0.8 nozzle": [ "Bambu Lab P1S 0.8 nozzle", @@ -106,7 +113,8 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -115,22 +123,26 @@ "Bambu Lab X1 0.2 nozzle": [ "Bambu Lab A1 mini 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab X1 0.4 nozzle": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab X1 0.6 nozzle": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab X1 0.8 nozzle": [ "Bambu Lab A1 mini 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -139,22 +151,26 @@ "Bambu Lab X1 Carbon 0.2 nozzle": [ "Bambu Lab A1 mini 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab X1 Carbon 0.4 nozzle": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab X1 Carbon 0.6 nozzle": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab X1 Carbon 0.8 nozzle": [ "Bambu Lab A1 mini 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -163,22 +179,26 @@ "Bambu Lab X1E 0.2 nozzle": [ "Bambu Lab A1 mini 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab X1E 0.4 nozzle": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab X1E 0.6 nozzle": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab X1E 0.8 nozzle": [ "Bambu Lab A1 mini 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -187,22 +207,26 @@ "Bambu Lab P1P 0.2 nozzle": [ "Bambu Lab A1 mini 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab P1P 0.4 nozzle": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab P1P 0.6 nozzle": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab P1P 0.8 nozzle": [ "Bambu Lab A1 mini 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -211,22 +235,26 @@ "Bambu Lab P1S 0.2 nozzle": [ "Bambu Lab A1 mini 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "Bambu Lab P1S 0.4 nozzle": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "Bambu Lab P1S 0.6 nozzle": [ "Bambu Lab A1 mini 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "Bambu Lab P1S 0.8 nozzle": [ "Bambu Lab A1 mini 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } }, @@ -269,6 +297,46 @@ "Bambu Lab A1 mini 0.8 nozzle" ] } + }, + "Bambu Lab H2D Pro": { + "downward_check": { + "Bambu Lab H2D Pro 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle" + ], + "Bambu Lab H2D Pro 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ], + "Bambu Lab H2D Pro 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle" + ], + "Bambu Lab H2D Pro 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] + } } } } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json index b8df5dc8b0..4a79ee9fb7 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json @@ -13,14 +13,15 @@ "default_filament_profile": [ "Bambu PLA Basic @BBL A1 0.2 nozzle" ], + "default_print_profile": "0.10mm Standard @BBL A1 0.2 nozzle", "max_layer_height": [ "0.14" ], "min_layer_height": [ "0.04" ], - "default_print_profile": "0.10mm Standard @BBL A1 0.2 nozzle", "upward_compatible_machine": [ - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json index aeb7e5d081..af130fe795 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json @@ -68,7 +68,8 @@ "255" ], "upward_compatible_machine": [ - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: A1 =========================\n;===== date: 20240620 =====================\nG392 S0\nM9833.2\n;M400\n;M73 P1.717\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\n\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A43 B10 L100 C46 D10 M70 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C43 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C41 D10 M80 E41 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E44 F10 N80\nM1006 A0 B10 L100 C49 D10 M80 E49 F10 N80\nM1006 A0 B10 L100 C0 D10 M80 E0 F10 N80\nM1006 A44 B10 L100 C48 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A43 B10 L100 C46 D10 M60 E39 F10 N80\nM1006 W\nM18 \n;=====start printer sound ===================\n\n;=====avoid end stop =================\nG91\nG380 S2 Z40 F1200\nG380 S3 Z-15 F1200\nG90\n\n;===== reset machine status =================\n;M290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.65 Y1.2 Z0.6 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M211 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\nM1002 gcode_claim_action : 13\n\nG28 X\nG91\nG1 Z5 F1200\nG90\nG0 X128 F30000\nG0 Y254 F3000\nG91\nG1 Z-5 F1200\n\nM109 S25 H140\n\nM17 E0.3\nM83\nG1 E10 F1200\nG1 E-0.5 F30\nM17 D\n\nG28 Z P0 T140; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n G90\n G1 Z5 F1200\nM623\n\n;M400\n;M73 P1.717\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 24\n\nM400\n;G392 S1\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on\n\nG90\nG1 X-28.5 F30000\nG1 X-48.2 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-48.2 F3000\n M400\n\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM109 S{nozzle_temperature_range_high[initial_no_support_extruder]} H300\nG92 E0\nG1 E50 F200 ; lower extrusion speed to avoid clog\nM400\nM106 P1 S178\nG92 E0\nG1 E5 F200\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG92 E0\nG1 E-0.5 F300\n\nG1 X-28.5 F30000\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\n\n;G392 S0\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n;M400\n;M73 P1.717\n\n;===== auto extrude cali start =========================\nM975 S1\n;G392 S1\n\nG90\nM83\nT1000\nG1 X-48.2 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\n\nM622 J1\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_extruder]}\n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-48.2 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;G392 S0\n;===== auto extrude cali end ========================\n\n;M400\n;M73 P1.717\n\nM104 S170 ; prepare to wipe nozzle\nM106 S255 ; turn on fan\n\n;===== mech mode fast check start =====================\nM1002 gcode_claim_action : 3\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q1 A5 K0 O3\nM974 Q1 S2 P0\n\nM970.2 Q1 K1 W58 Z0.1\nM974 S2\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q0 A10 K0 O1\nM974 Q0 S2 P0\n\nM970.2 Q0 K1 W78 Z0.1\nM974 S2\n\nM975 S1\nG1 F30000\nG1 X0 Y5\nG28 X ; re-home XY\n\nG1 Z4 F1200\n\n;===== mech mode fast check end =======================\n\n;M400\n;M73 P1.717\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\n\nM975 S1\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\n;===== remove waste by touching start =====\n\nM104 S170 ; set temp down to heatbed acceptable\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nG0 X108 Y-0.5 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X110 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X112 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X114 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X116 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X118 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X120 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X122 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X124 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X126 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X128 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X130 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X132 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X134 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X136 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X138 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X140 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X142 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X144 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X146 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X148 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;===== remove waste by touching end =====\n\nG1 Z10 F1200\nG0 X118 Y261 F30000\nG1 Z5 F1200\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-50}\n\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S140 ; prepare to abl\nG0 Z5 F20000\n\nG0 X128 Y261 F20000 ; move to exposed steel surface\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z10 F1200\n\n;===== brush material wipe nozzle =====\n\nG90\nG1 Y250 F30000\nG1 X55\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X-35 F30000\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Z5.000 F1200\n\nG90\nG1 X30 Y250.000 F30000\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X35 F30000\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Z10.000 F1200\n\n;===== brush material wipe nozzle end =====\n\nG90\n;G0 X128 Y261 F20000 ; move to exposed steel surface\nG1 Y250 F30000\nG1 X138\nG1 Y261\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nM109 S140\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM211 R; pop softend status\n\n;===== wipe nozzle end ================================\n\n;M400\n;M73 P1.717\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\n\nG90\nG1 Z5 F1200\nG1 X0 Y0 F30000\nG29.2 S1 ; turn on ABL\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140\nM106 S0 ; turn off fan , too noisy\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\n;M400\n;M73 P1.717\n\nG1 X108.000 Y-0.500 F30000\nG1 Z0.300 F1200\nM400\nG2814 Z0.32\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; prepare to print\n\n;===== nozzle load line ===============================\n;G90\n;M83\n;G1 Z5 F1200\n;G1 X88 Y-0.5 F20000\n;G1 Z0.3 F1200\n\n;M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n\n;G1 E2 F300\n;G1 X168 E4.989 F6000\n;G1 Z1 F1200\n;===== nozzle load line end ===========================\n\n;===== extrude cali test ===============================\n\nM400\n M900 S\n M900 C\n G90\n M83\n\n M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n G0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\n\nM900 R\n\nM1002 judge_flag extrude_cali_flag\nM622 J1\n G90\n G1 X108.000 Y1.000 F30000\n G91\n G1 Z-0.700 F1200\n G90\n M83\n G0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\nM623\n\nG1 Z0.2\n\n;M400\n;M73 P1.717\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n;G392 S1 ; turn on clog detection\nM1007 S1 ; turn on mass estimation\nG29.4\n", "machine_end_gcode": ";===== date: 20231229 =====================\nG392 S0 ;turn off nozzle clog detect\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18 X Y Z\n\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json index 21f1df2cc9..ec27c8ac76 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json @@ -21,6 +21,7 @@ "0.12" ], "upward_compatible_machine": [ - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json index cc3dbb5396..b0c7bc0a76 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json @@ -21,6 +21,7 @@ "0.16" ], "upward_compatible_machine": [ - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json index 40acd2b1df..d1e300f71d 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json @@ -30,6 +30,7 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json index bb592b07ba..5c12293042 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -74,7 +74,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20240620 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\nM9833.2\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S3 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.3 F18000 ;Move to start position\n M400\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-13.5 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.3 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n\n\n\n", "machine_end_gcode": ";===== date: 20231229 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18 X Y Z\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json index 8d3bbf4be2..30e5761272 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json @@ -36,6 +36,7 @@ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json index fec42fdb13..3d111d0903 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json @@ -36,6 +36,7 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json index 05b634c0b5..019f1212e9 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json @@ -28,5 +28,8 @@ "0.4", "0.4", "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json index 3228852820..63c3d5ba36 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json @@ -26,26 +26,6 @@ ], "hotend_heating_rate": "3.6", "machine_load_filament_time": "30", - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], "machine_max_speed_e": [ "50", "50", @@ -113,13 +93,16 @@ "10", "10" ], + "support_chamber_temp_control": "1", "wrapping_exclude_area": [ "145x326", "145x310", "256x310", "256x326" ], - "support_chamber_temp_control": "1", + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], "machine_start_gcode": ";===== machine: H2D start ======\n;===== date: 20250728 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z22 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{elsif curr_bed_type==\"High Temp Plate\"}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n T1001\n G383.4 ; left-extruder load status detection\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\n M972 S14 P0 ; nozzle type detection\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG\")) && (nozzle_diameter[initial_no_support_extruder] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_extruder] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_extruder] == \"PA\") || (filament_type[initial_no_support_extruder] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M83\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M500 ; save cali data\nM623\n\nM622 J0\n G28\nM623\n\n;===== bed leveling end ================================\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n M500\n\n;===== z ofst cali end =====\n\nG39.1 ; cali nozzle wrapped detection pos\nM500\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n M500\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\n M500\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM620 S[initial_no_support_extruder]A\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_extruder]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M83\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G1 X290 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n\n", "machine_end_gcode": ";===== date: 2025/05/16 =====================\n;===== H2D =====================\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 320}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z320 F600\n G1 Z320\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", "layer_change_gcode": ";======== H2D 20250710 layer_change ========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json index 5f1087a19f..b8f59a8b32 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json @@ -28,5 +28,8 @@ "1.4", "1.4", "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json index 26d3f6ff5b..696d546708 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json @@ -28,5 +28,8 @@ "3", "3", "3" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json index ff47e60c9a..8352e38a6f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json @@ -28,5 +28,8 @@ "0.4", "0.4", "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json index 98250e06e4..21d561ec4f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json @@ -36,26 +36,6 @@ "3.6" ], "machine_load_filament_time": "30", - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], "machine_max_speed_e": [ "50", "50", @@ -124,6 +104,9 @@ "10" ], "support_chamber_temp_control": "1", + "upward_compatible_machine": [ + "Bambu Lab H2D 0.4 nozzle" + ], "machine_start_gcode": ";===== machine: H2D Pro =========================\n;===== date: 20250528 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z22 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{endif}\n;==== set airduct mode ==== \n\n;==== set ext toodhead cooling fan ==== \n{if (min_vitrification_temperature <= 70)}\nM106 P9 S255\n{endif}\n;==== set ext toodhead cooling fan ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{elsif curr_bed_type==\"High Temp Plate\"}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nG90\nG1 X175 Y160 F30000\n\nG28 Z P0 T250\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n T1001\n G383.4 ; left-extruder load status detection\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n M972 S19 P0 C0 ; heatbed presence detection\nM623\n\n M972 S14 P0 ; nozzle type detection\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG\")) && (nozzle_diameter[initial_no_support_extruder] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_extruder] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_extruder] == \"PA\") || (filament_type[initial_no_support_extruder] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M83\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X275 Y300 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M500 ; save cali data\nM623\n\nM622 J0\n G28\nM623\n\n;===== bed leveling end ================================\n\nG39.1 ; cali nozzle wrapped detection pos\nM500\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n M500\n\n;===== z ofst cali end =====\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n M500\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM620 S[initial_no_support_extruder]A\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_extruder]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\nG29.2 S1 ; ensure z comp turn on\nG90\nM83\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n ;G130 O0 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L80 E5 D12 A{first_layer_print_min[0]} B{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n G130 O0 X250 Y-0.5 Z0.8 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L40 E20 D5\n{else}\n ;G130 O0 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L80 E5 D12 A{first_layer_print_min[0]} B{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n G130 O0 X250 Y-0.5 Z0.8 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L40 E20 D5\n{endif}\nG90\nM83\nG1 Z0.2\n\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n\n", "machine_end_gcode": ";===== date: 2025/05/27 =====================\n;===== H2D Pro =====================\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 320}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z320 F600\n G1 Z320\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", "layer_change_gcode": ";======== H2D Pro 20250521========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json index 501c4e7aa9..e812d903c6 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json @@ -11,9 +11,6 @@ ], "printer_model": "Bambu Lab H2D Pro", "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2DP" - ], "default_print_profile": "0.30mm Standard @BBL H2DP 0.6 nozzle", "max_layer_height": [ "0.42", @@ -28,5 +25,8 @@ "1.4", "1.4", "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json index 35abdb9c2c..8c3488b902 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json @@ -11,9 +11,6 @@ ], "printer_model": "Bambu Lab H2D Pro", "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2DP" - ], "default_print_profile": "0.40mm Standard @BBL H2DP 0.8 nozzle", "max_layer_height": [ "0.56", @@ -28,5 +25,8 @@ "3", "3", "3" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json index 593c0f750c..d0fdd43b41 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json @@ -29,7 +29,8 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index 360e90a299..f81a787f02 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -36,7 +36,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json index 6f536ea111..8ddd05b99a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json index 62e2919753..80a0c2f441 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json index a44bb36a77..6ba45feb2b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json @@ -29,7 +29,8 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index 8a2f0ddd49..ab4c7f47b8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n", "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json index a34fc40ddf..f396d1ad63 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json index 05f538a439..46bfec7f9b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20231107 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index 727a14290a..c7fe586f27 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -29,7 +29,8 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index a5f79f8e4c..2b1267e015 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -37,7 +37,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index 04cbfd1824..2c825a2fc5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index 78cfca0c9c..9229e2fc9a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index c1a248b095..e86b499e8b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.2 nozzle", "Bambu Lab X1E 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 9d49d87cce..e3bb82bfed 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -33,7 +33,8 @@ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 355d897192..f718bac0a1 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1E 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index fa395799a1..b7fcd9b39d 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab X1E 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ], "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json index 2b164a9d42..4fa0febf7a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.2 nozzle", "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle" + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle" ], "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json index 7244adba27..1c2b7a3650 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json @@ -35,7 +35,8 @@ "Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle" + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle" ], "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20250305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ====\n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n", diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json index 6b1d352772..65fb4175ca 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle" + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" ], "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json index 2c5a69b0a0..d0013a2fc5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json @@ -32,7 +32,8 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle" + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" ], "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file