update locale and fix some translation caused by string changes

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3341,8 +3341,8 @@ msgid ""
 "be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 "La còpia del codi-G temporal ha finalitzat, però el codi exportat no s'ha "
-"pogut obrir durant la verificació de la còpia. El codi-G de sortida és a %1%."
+"pogut obrir durant la verificació de la còpia. El codi-G de sortida és a "
-"tmp."
+"%1%.tmp."
 
 #, boost-format
 msgid "G-code file exported to %1%"
@@ -3706,9 +3706,9 @@ msgstr ""
 
 #, c-format, boost-format
 msgid ""
-"Current chamber temperature is higher than the material's safe temperature,"
+"Current chamber temperature is higher than the material's safe "
-"it may result in material softening and clogging.The maximum safe "
+"temperature,it may result in material softening and clogging.The maximum "
-"temperature for the material is %d"
+"safe temperature for the material is %d"
 msgstr ""
 "La temperatura actual de la cambra és superior a la temperatura segura del "
 "material, pot provocar un estovament i obstrucció del material. La "
@@ -12277,8 +12277,8 @@ msgid "mm/s² or %"
 msgstr "mm/s o %"
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
-"g. 100%), it will be calculated based on the default acceleration."
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 "Acceleració del farciment poc dens. Si el valor s'expressa en percentatge "
 "( per exemple, 100% ), es calcularà a partir de l'acceleració predeterminada."
@@ -15243,9 +15243,9 @@ msgid "Idle temperature"
 msgstr "Temperatura d'espera"
 
 msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
+"Nozzle temperature when the tool is currently not used in multi-tool "
-"This is only used when 'Ooze prevention' is active in Print Settings. Set to "
+"setups.This is only used when 'Ooze prevention' is active in Print Settings. "
-"0 to disable."
+"Set to 0 to disable."
 msgstr ""
 "Temperatura del broquet quan l'eina no s'utilitza actualment en "
 "configuracions multieina. Només s'utilitza quan la \"Prevenció de "
@@ -15769,11 +15769,11 @@ msgid "Debug level"
 msgstr "Nivell de depuració"
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
-"trace\n"
+"5:trace\n"
 msgstr ""
-"Defineix el nivell de registre de depuració. 0:fatal, 1:error, 2:warning, 3:"
+"Defineix el nivell de registre de depuració. 0:fatal, 1:error, 2:warning, "
-"info, 4:debug, 5:tracejar\n"
+"3:info, 4:debug, 5:tracejar\n"
 
 msgid "Enable timelapse for print"
 msgstr "Activa el timelapse per a la impressió"
@@ -16220,8 +16220,8 @@ msgstr "Suport: generar punts de contacte"
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
-"Format de fitxer desconegut. El fitxer d'entrada ha de tenir extensió .stl, ."
+"Format de fitxer desconegut. El fitxer d'entrada ha de tenir "
-"obj, .amf( .xml )."
+"extensió .stl, .obj, .amf( .xml )."
 
 msgid "Loading of a model file failed."
 msgstr "La càrrega d'un fitxer de model ha fallat."

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2024-11-03 20:59+0100\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -13469,16 +13469,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "Normální (auto)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "Strom (auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "Normální (manuální)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "Strom (manuální)"
 
 msgid "Support/object xy distance"
 msgstr "Podpěry/Objekt xy vzdálenost"
@@ -17333,18 +17333,6 @@ msgstr ""
 #~ "podpěr. Pokud je vybrána možnost Normální(manual) nebo Strom(manual), "
 #~ "budou generovány pouze vynucené podpěry"
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normální (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "Strom (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "Normální (manuální)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "Strom (manuální)"
-
 #~ msgid "Unselect"
 #~ msgstr "Zrušení výběru"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -1016,7 +1016,8 @@ msgstr "Ortne den Text zur Kamera aus."
 
 #, boost-format
 msgid "Font \"%1%\" can't be used. Please select another."
-msgstr "Schriftart \"%1%\" kann nicht verwendet werden. Bitte wählen Sie eine andere."
+msgstr ""
+"Schriftart \"%1%\" kann nicht verwendet werden. Bitte wählen Sie eine andere."
 
 #, boost-format
 msgid ""
@@ -6549,7 +6550,9 @@ msgid "mm/s²"
 msgstr "mm/s²"
 
 msgid "No speeds provided for calibration. Use default optimal speed "
-msgstr "Keine Geschwindigkeiten für die Kalibrierung eingestellt. Verwenden die optimale Geschwindigkeit"
+msgstr ""
+"Keine Geschwindigkeiten für die Kalibrierung eingestellt. Verwenden die "
+"optimale Geschwindigkeit"
 
 msgid "mm/s"
 msgstr "mm/s"
@@ -9849,8 +9852,8 @@ msgid ""
 "diameter."
 msgstr ""
 "Drucken mit mehreren Extrudern mit unterschiedlichen Düsendurchmessern. Wenn "
-"die Stützstruktur mit dem aktuellen Filament gedruckt werden soll ("
+"die Stützstruktur mit dem aktuellen Filament gedruckt werden soll "
-"support_filament == 0 oder support_interface_filament == 0), müssen alle "
+"(support_filament == 0 oder support_interface_filament == 0), müssen alle "
 "Düsen den gleichen Durchmesser haben."
 
 msgid ""
@@ -14252,8 +14255,8 @@ msgid ""
 "warp / crack."
 msgstr ""
 "Begrenzt die Luftzug-Schutz-Ringe auf eine Wand nach der ersten Schicht. "
-"Dies ist gelegentlich nützlich, um Filament zu sparen, kann aber dazu führen, "
+"Dies ist gelegentlich nützlich, um Filament zu sparen, kann aber dazu "
-"dass der Luftzug-Schutz verzieht oder reißt."
+"führen, dass der Luftzug-Schutz verzieht oder reißt."
 
 msgid "Draft shield"
 msgstr "Luftzug-Schutz"
@@ -19078,18 +19081,6 @@ msgstr ""
 #~ "Stützstrukturen zu generieren. Wenn Normal (manuell) oder Baum (manuell) "
 #~ "ausgewählt ist, werden nur Stützerzwinger erzeugt."
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normal (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "Baum (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "Normal (manuell)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "Baum (manuell)"
-
 #~ msgid ", ver: "
 #~ msgstr ", Ver: "
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -13227,16 +13227,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "Normal(auto)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "Tree(auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "Normal(manual)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "Tree(manual)"
 
 msgid "Support/object xy distance"
 msgstr "Support/object xy distance"
@@ -17112,18 +17112,6 @@ msgstr ""
 #~ "If normal(manual) or tree(manual) is selected, only support enforcers are "
 #~ "generated"
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normal(auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "Tree(auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "Normal(manual)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "Tree(manual)"
-
 #~ msgctxt "Verb"
 #~ msgid "Scale"
 #~ msgstr "Scale"

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -14389,16 +14389,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "Normal (auto)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "Árbol (auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "Normal (manual)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "Árbol (manual)"
 
 msgid "Support/object xy distance"
 msgstr "Distancia soporte/objeto X-Y"
@@ -18822,18 +18822,6 @@ msgstr ""
 #~ "automáticamente. Si se selecciona normal (manual) o árbol (manual), sólo "
 #~ "se generan los soportes forzados"
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normal (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "Árbol (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "Normal (manual)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "Árbol (manual)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "Mayúsculas + Botón izquierdo del ratón"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -3746,9 +3746,9 @@ msgstr ""
 
 #, c-format, boost-format
 msgid ""
-"Current chamber temperature is higher than the material's safe temperature,"
+"Current chamber temperature is higher than the material's safe "
-"it may result in material softening and clogging.The maximum safe "
+"temperature,it may result in material softening and clogging.The maximum "
-"temperature for the material is %d"
+"safe temperature for the material is %d"
 msgstr ""
 "La température actuelle du caisson est supérieure à la température de "
 "sécurité du matériau, ce qui peut entraîner un ramollissement et un bouchage "
@@ -7956,9 +7956,9 @@ msgid ""
 "complications.Please use with the latest printer firmware."
 msgstr ""
 "Fonction expérimentale : Rétracter et couper le filament à une plus grande "
-"distance lors des changements de filament afin de minimiser l’affleurement."
+"distance lors des changements de filament afin de minimiser "
-"Bien que cela puisse réduire sensiblement l’affleurement, cela peut "
+"l’affleurement.Bien que cela puisse réduire sensiblement l’affleurement, "
-"également augmenter le risque d’obstruction des buses ou d’autres "
+"cela peut également augmenter le risque d’obstruction des buses ou d’autres "
 "complications d’impression.Veuillez utiliser le dernier micrologiciel de "
 "l’imprimante."
 
@@ -12448,8 +12448,8 @@ msgid "mm/s² or %"
 msgstr "mm/s² or %"
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
-"g. 100%), it will be calculated based on the default acceleration."
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 "Accélération du remplissage interne. Si la valeur est exprimée en "
 "pourcentage (par exemple 100%), elle sera calculée en fonction de "
@@ -15454,9 +15454,9 @@ msgid "Idle temperature"
 msgstr "Température au repos"
 
 msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
+"Nozzle temperature when the tool is currently not used in multi-tool "
-"This is only used when 'Ooze prevention' is active in Print Settings. Set to "
+"setups.This is only used when 'Ooze prevention' is active in Print Settings. "
-"0 to disable."
+"Set to 0 to disable."
 msgstr ""
 "Température de la buse lorsque l’outil n’est pas utilisé dans les "
 "configurations multi-outils. Cette fonction n’est utilisée que lorsque la "
@@ -15987,11 +15987,11 @@ msgid "Debug level"
 msgstr "Niveau de débogage"
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
-"trace\n"
+"5:trace\n"
 msgstr ""
-"Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :"
+"Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, "
-"avertissement, 3 :info, 4 :débogage, 5 :trace\n"
+"2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n"
 
 msgid "Enable timelapse for print"
 msgstr "Activer le timelapse pour l’impression"
@@ -16450,8 +16450,8 @@ msgstr "Support : génération des points de contact"
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
-"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ."
+"Format de fichier inconnu : le fichier d'entrée doit porter "
-"stl, .obj ou .amf (.xml)."
+"l'extension .stl, .obj ou .amf (.xml)."
 
 msgid "Loading of a model file failed."
 msgstr "Le chargement du fichier modèle a échoué."
@@ -16461,8 +16461,8 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide"
 
 msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
 msgstr ""
-"Format de fichier inconnu : le fichier d'entrée doit porter "
+"Format de fichier inconnu : le fichier d'entrée doit porter l'extension "
-"l'extension .3mf, .zip ou .amf."
+".3mf, .zip ou .amf."
 
 msgid "Canceled"
 msgstr "Annulé"
@@ -19231,18 +19231,6 @@ msgstr ""
 #~ "Arborescents (manuel), seuls les générateurs de support manuels sont "
 #~ "générés"
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normaux (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "Arborescents (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "Normaux (manuel)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "Arborescents (manuel)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "ShiftLeft mouse button"
 
@@ -20421,10 +20409,10 @@ msgstr ""
 #~ "chargement des données de géométrie uniquement."
 
 #~ msgid ""
-#~ "Relative extrusion is recommended when using \"label_objects\" option."
+#~ "Relative extrusion is recommended when using \"label_objects\" "
-#~ "Some extruders work better with this option unchecked (absolute extrusion "
+#~ "option.Some extruders work better with this option unchecked (absolute "
-#~ "mode). Wipe tower is only compatible with relative mode. It is always "
+#~ "extrusion mode). Wipe tower is only compatible with relative mode. It is "
-#~ "enabled on BambuLab printers. Default is checked"
+#~ "always enabled on BambuLab printers. Default is checked"
 #~ msgstr ""
 #~ "L’extrusion relative est recommandée lors de l’utilisation de l’option "
 #~ "\"label_objects\". Certains extrudeurs fonctionnent mieux avec cette "

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -13386,16 +13386,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "normál (auto)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "fa (auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "normál (manuális)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "fa (manuális)"
 
 msgid "Support/object xy distance"
 msgstr "Támasz/tárgy XY távolság"
@@ -17304,18 +17304,6 @@ msgstr ""
 #~ "használva. Ha a normál (kézi) vagy a fa (kézi) van kiválasztva, akkor "
 #~ "csak a kényszerített támaszok kerülnek generálásra."
 
-#~ msgid "normal(auto)"
-#~ msgstr "normál (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "fa (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normál (manuális)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "fa (manuális)"
-
 #~ msgctxt "Verb"
 #~ msgid "Scale"
 #~ msgstr "Átméretezés"

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3740,9 +3740,9 @@ msgstr ""
 
 #, c-format, boost-format
 msgid ""
-"Current chamber temperature is higher than the material's safe temperature,"
+"Current chamber temperature is higher than the material's safe "
-"it may result in material softening and clogging.The maximum safe "
+"temperature,it may result in material softening and clogging.The maximum "
-"temperature for the material is %d"
+"safe temperature for the material is %d"
 msgstr ""
 "L'attuale temperatura della camera è superiore alla temperatura di sicurezza "
 "del materiale. Potrebbe causare l'ammorbidimento e l'intasamento del "
@@ -12363,8 +12363,8 @@ msgid "mm/s² or %"
 msgstr "mm/s o %"
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
-"g. 100%), it will be calculated based on the default acceleration."
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 "Accelerazione del riempimento sparso. Se il valore è espresso in percentuale "
 "(ad esempio 100%), verrà calcolato in base all'accelerazione predefinita."
@@ -15372,9 +15372,9 @@ msgid "Idle temperature"
 msgstr "Temperatura di inattività"
 
 msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
+"Nozzle temperature when the tool is currently not used in multi-tool "
-"This is only used when 'Ooze prevention' is active in Print Settings. Set to "
+"setups.This is only used when 'Ooze prevention' is active in Print Settings. "
-"0 to disable."
+"Set to 0 to disable."
 msgstr ""
 "Temperatura dell'ugello quando l'estrusore non è attualmente utilizzato in "
 "configurazioni multitestina. Viene utilizzato solo quando 'Prevenzione "
@@ -15898,11 +15898,11 @@ msgid "Debug level"
 msgstr "Livello di debug"
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
-"trace\n"
+"5:trace\n"
 msgstr ""
-"Imposta livello di debug. 0:fatale, 1:errore, 2:avviso, 3:info, 4:debug, 5:"
+"Imposta livello di debug. 0:fatale, 1:errore, 2:avviso, 3:info, 4:debug, "
-"traccia\n"
+"5:traccia\n"
 
 msgid "Enable timelapse for print"
 msgstr "Abilita timelapse per la stampa"
@@ -16359,8 +16359,8 @@ msgstr "Supporto: generazione punti di contatto"
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
-"Formato file sconosciuto: il file di input deve avere un'estensione .stl, ."
+"Formato file sconosciuto: il file di input deve avere "
-"obj o .amf(.xml)."
+"un'estensione .stl, .obj o .amf(.xml)."
 
 msgid "Loading of a model file failed."
 msgstr "Caricamento file del modello non riuscito."
@@ -16370,8 +16370,8 @@ msgstr "Impossibile leggere il file fornito perché è vuoto"
 
 msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
 msgstr ""
-"Formato file sconosciuto: il file di input deve avere un'estensione .3mf o ."
+"Formato file sconosciuto: il file di input deve avere un'estensione .3mf "
-"zip.amf."
+"o .zip.amf."
 
 msgid "Canceled"
 msgstr "Annullato"
@@ -19047,18 +19047,6 @@ msgstr ""
 #~ "supporti. Se si seleziona normale(manuale) o albero(manuale), vengono "
 #~ "generati solo gli esecutori del supporto."
 
-#~ msgid "normal(auto)"
-#~ msgstr "normal(auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "albero(auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normale(manuale)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "albero(manuale)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "MaiuscTasto sinistro del mouse"
 
@@ -19260,9 +19248,10 @@ msgstr ""
 #~ "\n"
 #~ "\n"
 #~ "Per impostazione predefinita, i piccoli bridge interni vengono filtrati e "
-#~ "il riempimento solido interno viene stampato direttamente sul riempimento."
+#~ "il riempimento solido interno viene stampato direttamente sul "
-#~ "Questo metodo funziona bene nella maggior parte dei casi, velocizzando la "
+#~ "riempimento.Questo metodo funziona bene nella maggior parte dei casi, "
-#~ "stampa senza compromettere troppo la qualità della superficie superiore.\n"
+#~ "velocizzando la stampa senza compromettere troppo la qualità della "
+#~ "superficie superiore.\n"
 #~ "\n"
 #~ "Tuttavia, in modelli fortemente inclinati o curvi, soprattutto se si "
 #~ "utilizza una densità di riempimento troppo bassa, potrebbe comportare "
@@ -19886,10 +19875,10 @@ msgstr ""
 #~ "RHEL 7 puoi trovare quelle istruzioni sul wiki."
 
 #~ msgid ""
-#~ "Relative extrusion is recommended when using \"label_objects\" option."
+#~ "Relative extrusion is recommended when using \"label_objects\" "
-#~ "Some extruders work better with this option unchecked (absolute extrusion "
+#~ "option.Some extruders work better with this option unchecked (absolute "
-#~ "mode). Wipe tower is only compatible with relative mode. It is always "
+#~ "extrusion mode). Wipe tower is only compatible with relative mode. It is "
-#~ "enabled on BambuLab printers. Default is checked"
+#~ "always enabled on BambuLab printers. Default is checked"
 #~ msgstr ""
 #~ "L'estrusione relativa è consigliata quando si utilizza l'opzione "
 #~ "\"label_objects\". Alcuni estrusori funzionano meglio con questa opzione "

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -13151,16 +13151,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "通常 (自動)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "ツリー (自動)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "通常 (手動)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "ツリー (手動)"
 
 msgid "Support/object xy distance"
 msgstr "水平間隔"
@@ -17070,18 +17070,6 @@ msgstr ""
 #~ "generated"
 #~ msgstr "通常 (自動) と ツリー (自動) では自動でサポートを作成します。"
 
-#~ msgid "normal(auto)"
-#~ msgstr "通常 (自動)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "ツリー (自動)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "通常 (手動)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "ツリー (手動)"
-
 #~ msgid "Unselect"
 #~ msgstr "選択解除"
 

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-03-04 04:56+0900\n"
 "Last-Translator: ElectricalBoy "
 "<15651807+ElectricalBoy@users.noreply.github.com>\n"
@@ -18037,18 +18037,6 @@ msgstr ""
 #~ "일반(자동) 및 나무(자동)은 지지대를 자동으로 생성합니다. 일반(수동) 또는 "
 #~ "나무(수동) 선택시에는 강제된 지지대만 생성됩니다"
 
-#~ msgid "normal(auto)"
-#~ msgstr "일반(자동)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "나무(자동)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "일반(수동)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "나무(수동)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "Shift + 왼쪽 마우스 버튼"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -13559,16 +13559,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "Normaal (automatisch)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "Tree (auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "normaal (handmatig)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "tree (handmatig)"
 
 msgid "Support/object xy distance"
 msgstr "Support/object XY afstand"
@@ -17584,18 +17584,6 @@ msgstr ""
 #~ "genereren. Als normaal(handmatig) of tree(handmatig) is geselecteerd, "
 #~ "worden alleen ondersteuningen handhavers gegenereerd."
 
-#~ msgid "normal(auto)"
-#~ msgstr "Normaal (automatisch)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "tree(auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normaal (handmatig)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "tree (handmatig)"
-
 #~ msgctxt "Verb"
 #~ msgid "Scale"
 #~ msgstr "Schalen"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -2576,8 +2576,8 @@ msgid ""
 "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
 "load or unload filaments."
 msgstr ""
-"Wybierz gniazdo AMS, a następnie naciśnij przycisk „Ładuj” lub „Rozładuj” ,"
+"Wybierz gniazdo AMS, a następnie naciśnij przycisk „Ładuj” lub "
-"aby automatycznie załadować lub wyładować filamenty."
+"„Rozładuj” ,aby automatycznie załadować lub wyładować filamenty."
 
 msgid "Edit"
 msgstr "Edytuj"
@@ -3703,9 +3703,9 @@ msgstr ""
 
 #, c-format, boost-format
 msgid ""
-"Current chamber temperature is higher than the material's safe temperature,"
+"Current chamber temperature is higher than the material's safe "
-"it may result in material softening and clogging.The maximum safe "
+"temperature,it may result in material softening and clogging.The maximum "
-"temperature for the material is %d"
+"safe temperature for the material is %d"
 msgstr ""
 "Obecna temperatura komory jest wyższa niż bezpieczna temperatura dla "
 "filamentu, co może prowadzić do jego mięknięcia i zatykania. Maksymalna "
@@ -9955,8 +9955,8 @@ msgstr ""
 "Orca Slicer może przesyłać pliki G-code na hosta drukarki. To pole powinno "
 "zawierać nazwę hosta, adres IP lub URL hosta drukarki. Host drukowania za "
 "HAProxy z włączoną autoryzacją podstawową można uzyskać, wpisując nazwę "
-"użytkownika i hasło w URL w następującym formacie: https://username:"
+"użytkownika i hasło w URL w następującym formacie: https://"
-"password@your-octopi-address/"
+"username:password@your-octopi-address/"
 
 msgid "Device UI"
 msgstr "UI urządzenia"
@@ -12151,8 +12151,8 @@ msgid "mm/s² or %"
 msgstr "mm/s² lub %"
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
-"g. 100%), it will be calculated based on the default acceleration."
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 "Przyspieszenie na rzadkim wypełnieniu. Jeśli wartość jest wyrażona w "
 "procentach (np. 100%), będzie obliczana na podstawie domyślnego "
@@ -15105,9 +15105,9 @@ msgid "Idle temperature"
 msgstr "Temperatura w bezczynności"
 
 msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
+"Nozzle temperature when the tool is currently not used in multi-tool "
-"This is only used when 'Ooze prevention' is active in Print Settings. Set to "
+"setups.This is only used when 'Ooze prevention' is active in Print Settings. "
-"0 to disable."
+"Set to 0 to disable."
 msgstr ""
 "Temperatura dyszy, gdy narzędzie nie jest aktualnie używane w konfiguracjach "
 "wielonarzędziowych. Jest to używane tylko wtedy, gdy „Zapobieganie "
@@ -15620,11 +15620,11 @@ msgid "Debug level"
 msgstr "Poziom debugowania"
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
-"trace\n"
+"5:trace\n"
 msgstr ""
-"Ustawia poziom logowania debugowania. 0:fatal, 1:error, 2:warning, 3:info, 4:"
+"Ustawia poziom logowania debugowania. 0:fatal, 1:error, 2:warning, 3:info, "
-"debug, 5:trace\n"
+"4:debug, 5:trace\n"
 
 msgid "Enable timelapse for print"
 msgstr "Włącz timelaps dla druku"
@@ -16069,8 +16069,8 @@ msgstr "Podpory: tworzenie miejsc kontaktowych"
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
-"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj, ."
+"Nieznany format pliku. Plik wejściowy musi mieć "
-"amf(.xml)."
+"rozszerzenie .stl, .obj, .amf(.xml)."
 
 msgid "Loading of a model file failed."
 msgstr "Nie udało się wczytać pliku modelu."
@@ -16080,8 +16080,8 @@ msgstr "Dostarczony plik nie mógł być odczytany, ponieważ jest pusty"
 
 msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
 msgstr ""
-"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip."
+"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf "
-"amf."
+"lub .zip.amf."
 
 msgid "Canceled"
 msgstr "Anulowano"
@@ -18765,18 +18765,6 @@ msgstr ""
 #~ "generowania podpór. Jeśli wybierzesz 'normalny(manual)' lub "
 #~ "'drzewo(manual)', zostaną wygenerowane jedynie podpory wymuszone"
 
-#~ msgid "normal(auto)"
-#~ msgstr "normalny (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "drzewo (auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normalny (manual)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "drzewo (manual)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "Shift + Lewy przycisk myszy"
 
@@ -21037,10 +21025,10 @@ msgstr ""
 #~ msgstr "Pliki certyfikatów (.crt, .pem)|.crt;.pem|Wszystkie pliki|."
 
 #~ msgid ""
-#~ "Relative extrusion is recommended when using \"label_objects\" option."
+#~ "Relative extrusion is recommended when using \"label_objects\" "
-#~ "Some extruders work better with this option unchecked (absolute extrusion "
+#~ "option.Some extruders work better with this option unchecked (absolute "
-#~ "mode). Wipe tower is only compatible with relative mode. It is always "
+#~ "extrusion mode). Wipe tower is only compatible with relative mode. It is "
-#~ "enabled on BambuLab printers. Default is checked"
+#~ "always enabled on BambuLab printers. Default is checked"
 #~ msgstr ""
 #~ "Przy użyciu opcji \"label_objects\" zaleca się ekstruzję względną. "
 #~ "Niektóre ekstrudery działają lepiej, gdy ta opcja jest odznaczona (tryb "

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-02-21 11:24-0300\n"
 "Last-Translator: Alexandre Folle de Menezes <afmenez@terra.com.br>\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -6598,8 +6598,8 @@ msgid ""
 "Unable to perform boolean operation on model meshes. Only positive parts "
 "will be exported."
 msgstr ""
-"Não é possível executar operação booleana em malhas de modelo. Apenas "
+"Não é possível executar operação booleana em malhas de modelo. Apenas partes "
-"partes positivas serão exportadas."
+"positivas serão exportadas."
 
 msgid ""
 "Are you sure you want to store original SVGs with their local paths into the "
@@ -11492,8 +11492,8 @@ msgstr ""
 "e o estado cristalino. Esta configuração altera todo o fluxo de extrusão "
 "deste filamento no gcode proporcionalmente. A faixa de valores recomendada "
 "está entre 0,95 e 1,05. Talvez você possa ajustar este valor para obter uma "
-"superfície plana agradável quando houver um leve transbordamento ou subfluxo. "
+"superfície plana agradável quando houver um leve transbordamento ou "
-"\n"
+"subfluxo. \n"
 "\n"
 "A taxa de fluxo final do objeto é este valor multiplicado pela taxa de fluxo "
 "do filamento."
@@ -11541,9 +11541,9 @@ msgstr ""
 "volumétrico através do bico) e acelerações crescentes, observou-se que o "
 "valor efetivo de PA normalmente diminui. Isso significa que um único valor "
 "de PA nem sempre é 100% ideal para todos os recursos e um valor de "
-"compromisso é geralmente usado para não causar muita protuberância em "
+"compromisso é geralmente usado para não causar muita protuberância em partes "
-"partes com menor velocidade de fluxo e acelerações, mas também não causar "
+"com menor velocidade de fluxo e acelerações, mas também não causar lacunas "
-"lacunas em partes mais rápidas.\n"
+"em partes mais rápidas.\n"
 "\n"
 "Este recurso visa abordar essa limitação modelando a resposta do sistema de "
 "extrusão da sua impressora dependendo da velocidade de fluxo volumétrico e "
@@ -12374,10 +12374,9 @@ msgid ""
 "This setting is overridden by disable_fan_first_layers."
 msgstr ""
 "Esta velocidade do ventilador de resfriamento de peça é aplicada ao imprimir "
-"interfaces de suporte."
+"interfaces de suporte.Definir este parâmetro para uma velocidade maior que a "
-"Definir este parâmetro para uma velocidade maior que a normal reduz a força "
+"normal reduz a força de adesão de camada entre os suportes e a peça "
-"de adesão de camada entre os suportes e a peça suportada, tornando-os mais "
+"suportada, tornando-os mais fáceis de separar.\n"
-"fáceis de separar.\n"
 "Defina como -1 para desabilitá-lo.\n"
 "Esta configuração é substituída por disable_fan_first_layers."
 
@@ -12816,12 +12815,12 @@ msgstr ""
 "tempo de impressão) ou um valor de ~80% para maximizar a resistência do "
 "preenchimento esparso.\n"
 "\n"
-"O número de camadas sobre as quais o preenchimento é combinado é derivado "
+"O número de camadas sobre as quais o preenchimento é combinado é derivado da "
-"da divisão deste valor pela altura da camada e arredondado para o decimal "
+"divisão deste valor pela altura da camada e arredondado para o decimal mais "
-"mais próximo.\n"
+"próximo.\n"
 "\n"
-"Use valores absolutos em mm (por exemplo, 0,32 mm para um bico de 0,4 mm) "
+"Use valores absolutos em mm (por exemplo, 0,32 mm para um bico de 0,4 mm) ou "
-"ou valores em % (por exemplo, 80%). Este valor não deve ser maior que o "
+"valores em % (por exemplo, 80%). Este valor não deve ser maior que o "
 "diâmetro do bico."
 
 msgid "Filament to print internal sparse infill."
@@ -13290,12 +13289,12 @@ msgid ""
 "Allowed values: 0.5-5"
 msgstr ""
 "Um valor menor resulta em transições de faixa extrusão mais suaves. No "
-"entanto, isso resulta em um arquivo G-code significativamente maior e "
+"entanto, isso resulta em um arquivo G-code significativamente maior e mais "
-"mais instruções para a impressora processar.\n"
+"instruções para a impressora processar.\n"
 "\n"
-"O valor padrão de 3 funciona bem para a maioria dos casos. Se sua "
+"O valor padrão de 3 funciona bem para a maioria dos casos. Se sua impressora "
-"impressora estiver engasgando, aumente este valor para reduzir o número "
+"estiver engasgando, aumente este valor para reduzir o número de ajustes "
-"de ajustes feitos.\n"
+"feitos.\n"
 "\n"
 "Valores permitidos: 0.5-5"
 
@@ -13742,8 +13741,8 @@ msgid ""
 "Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results "
 "in Normal Lift"
 msgstr ""
-"Ângulo de deslocamento para o tipo de salto Z em Declive e Espiral. "
+"Ângulo de deslocamento para o tipo de salto Z em Declive e Espiral. Defini-"
-"Defini-lo para 90° resulta em Elevação Normal"
+"lo para 90° resulta em Elevação Normal"
 
 msgid "Only lift Z above"
 msgstr "Elevar Z apenas acima de"
@@ -15731,8 +15730,9 @@ msgid "Skip modified gcodes in 3mf"
 msgstr "Pular G-codes modificados em 3mf"
 
 msgid "Skip the modified gcodes in 3mf from Printer or filament Presets"
-msgstr "Pular os G-codes modificados em 3mf das predefinições de impressora "
+msgstr ""
-"ou de filamento"
+"Pular os G-codes modificados em 3mf das predefinições de impressora ou de "
+"filamento"
 
 msgid "MakerLab name"
 msgstr "Nome do MakerLab"
@@ -18757,18 +18757,6 @@ msgstr ""
 #~ "Se normal(manual) ou tree(manual) for selecionado, apenas os suportes são "
 #~ "gerados"
 
-#~ msgid "normal(auto)"
-#~ msgstr "normal(automático)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "árvore(automático)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normal(manual)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "árvore(manual)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "Botão do mouse ShiftLeft"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer v2.3.0-beta\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-03-02 17:17+0700\n"
 "Last-Translator: \n"
 "Language-Team: Andylg <andylg@yandex.ru>\n"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -13227,16 +13227,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "normal (auto)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "träd(auto)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "normal (manuell)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "tree (manuell)"
 
 msgid "Support/object xy distance"
 msgstr "Support/objekt xy distans"
@@ -17135,18 +17135,6 @@ msgstr ""
 #~ "Om normal(manual) eller tree(manual) väljs, genereras endast support "
 #~ "förstärkare."
 
-#~ msgid "normal(auto)"
-#~ msgstr "normal (auto)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "träd(auto)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "normal (manuell)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "tree (manuell)"
-
 #~ msgctxt "Verb"
 #~ msgid "Scale"
 #~ msgstr "Skala"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-03-07 09:30+0200\n"
 "Last-Translator: \n"
 "Language-Team: Ukrainian\n"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2024-07-28 07:12+0000\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -13083,16 +13083,16 @@ msgid ""
 msgstr ""
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "普通(自动)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "树状(自动)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "普通(手动)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "树状(手动)"
 
 msgid "Support/object xy distance"
 msgstr "支撑/模型xy间距"
@@ -16924,18 +16924,6 @@ msgstr ""
 #~ "普通（自动）和树状（自动）用于自动生成支撑体。如果选择普通（手动）或树状"
 #~ "（手动），仅会在支撑强制面上生成支撑。"
 
-#~ msgid "normal(auto)"
-#~ msgstr "普通(自动)"
-
-#~ msgid "tree(auto)"
-#~ msgstr "树状(自动)"
-
-#~ msgid "normal(manual)"
-#~ msgstr "普通(手动)"
-
-#~ msgid "tree(manual)"
-#~ msgstr "树状(手动)"
-
 #~ msgid "ShiftLeft mouse button"
 #~ msgstr "Shift + 鼠标左键"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-03-09 14:32+0800\n"
+"POT-Creation-Date: 2025-03-16 22:32+0800\n"
 "PO-Revision-Date: 2025-01-11 10:54+0800\n"
 "Last-Translator: Shuwn Hsu\n"
 "Language-Team: \n"
@@ -1003,8 +1003,8 @@ msgid ""
 "Can't load exactly same font(\"%1%\"). Application selected a similar "
 "one(\"%2%\"). You have to specify font for enable edit text."
 msgstr ""
-"無法加載完全相同的字體「%1%」。已自動選擇相似的字體「%2%」。若要啟用文"
+"無法加載完全相同的字體「%1%」。已自動選擇相似的字體「%2%」。若要啟用文字編"
-"字編輯，請指定字體。"
+"輯，請指定字體。"
 
 msgid "No symbol"
 msgstr "沒有任何字符"
@@ -9199,7 +9199,9 @@ msgstr "換料塔要求各個物件使用同樣的筏層數量"
 msgid ""
 "The prime tower is only supported for multiple objects if they are printed "
 "with the same support_top_z_distance"
-msgstr "只有當多個物件使用相同的支撐頂部 Z 距離 (support_top_z_distance) 列印時，才會支援換料塔"
+msgstr ""
+"只有當多個物件使用相同的支撐頂部 Z 距離 (support_top_z_distance) 列印時，才會"
+"支援換料塔"
 
 msgid ""
 "The prime tower requires that all objects are sliced with the same layer "
@@ -9227,8 +9229,9 @@ msgid ""
 "support_interface_filament == 0), all nozzles have to be of the same "
 "diameter."
 msgstr ""
-"使用不同噴嘴直徑的多個擠出機進行列印。如果支撐要使用當前的耗材列印（support_filament == 0 或 support_interface_filament == 0）"
+"使用不同噴嘴直徑的多個擠出機進行列印。如果支撐要使用當前的耗材列印"
-"，則所有噴嘴必須具有相同的直徑。"
+"（support_filament == 0 或 support_interface_filament == 0），則所有噴嘴必須"
+"具有相同的直徑。"
 
 msgid ""
 "The prime tower requires that support has the same layer height with object."
@@ -9261,8 +9264,8 @@ msgid ""
 "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
 "layer_gcode."
 msgstr ""
-"相對擠出機尋址需要重置每層的擠出機位置，以防止浮點精度損失。 將「G92 E0」加"
+"相對擠出機尋址需要重置每層的擠出機位置，以防止浮點精度損失。 將「G92 E0」加入"
-"入到 layer_gcode。"
+"到 layer_gcode。"
 
 msgid ""
 "\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
@@ -9728,8 +9731,9 @@ msgid ""
 "by the layer beneath it. Setting this value to 0% forces the cooling fan to "
 "run for all outer walls, regardless of the overhang degree."
 msgstr ""
-"當懸垂部分超過此指定的閾值時，強制冷卻風扇以「懸垂風扇速度」設定運行。此閾值以百分比表示，"
+"當懸垂部分超過此指定的閾值時，強制冷卻風扇以「懸垂風扇速度」設定運行。此閾值"
-"表示每條線寬中未被下層支撐的部分。將此值設為 0% 時，無論懸垂角度如何，都會強制冷卻風扇在所有外牆上運行"
+"以百分比表示，表示每條線寬中未被下層支撐的部分。將此值設為 0% 時，無論懸垂角"
+"度如何，都會強制冷卻風扇在所有外牆上運行"
 
 msgid "External bridge infill direction"
 msgstr "外部橋接結構的填充方向"
@@ -13020,7 +13024,9 @@ msgid ""
 "Limits the draft shield loops to one wall after the first layer. This is "
 "useful, on occasion, to conserve filament but may cause the draft shield to "
 "warp / crack."
-msgstr "將防風罩的迴圈數限制為第一層後只有一層壁。這樣做有時能節省耗材，但可能會導致防風罩變形或裂開。"
+msgstr ""
+"將防風罩的迴圈數限制為第一層後只有一層壁。這樣做有時能節省耗材，但可能會導致"
+"防風罩變形或裂開。"
 
 msgid "Draft shield"
 msgstr "防風罩"
@@ -13036,8 +13042,8 @@ msgid ""
 "distance from the object. Therefore, if brims are active it may intersect "
 "with them. To avoid this, increase the skirt distance value.\n"
 msgstr ""
-"防風罩可有效保護 ABS 或 ASA 列印物免受氣流影響，避免翹曲或脫離打印床。通常"
+"防風罩可有效保護 ABS 或 ASA 列印物免受氣流影響，避免翹曲或脫離打印床。通常僅"
-"僅在開放式框架的打印機（即無外殼）中需要使用。\n"
+"在開放式框架的打印機（即無外殼）中需要使用。\n"
 "\n"
 "啟用後，Skirt 的高度將與列印物的最高點相同。若未啟用，則使用『Skirt 高度』的"
 "設定值。\n"
@@ -17084,8 +17090,8 @@ msgstr ""
 #~ "following settings: at least 2 interface layers, at least 0.1mm top z "
 #~ "distance or using support materials on interface."
 #~ msgstr ""
-#~ "對於「強壯樹」和「混合樹」的支撐樣式，我們推薦以下設定：至少 2 層界面"
+#~ "對於「強壯樹」和「混合樹」的支撐樣式，我們推薦以下設定：至少 2 層界面層，"
-#~ "層，至少 0.1 毫米的頂部z距離或使用專用的支撐線材。"
+#~ "至少 0.1 毫米的頂部z距離或使用專用的支撐線材。"
 
 #~ msgid ""
 #~ "When using support material for the support interface, We recommend the "
@@ -17332,17 +17338,5 @@ msgstr ""
 #~ "選擇『普通（自動）』或『樹狀（自動）』時，會自動生成支撐結構。若選擇『普通"
 #~ "（手動）』或『樹狀（手動）』，則僅生成支撐強化部分"
 
-#~ msgid "normal(auto)"
-#~ msgstr "普通（自動）"
-
-#~ msgid "tree(auto)"
-#~ msgstr "樹狀（自動）"
-
-#~ msgid "normal(manual)"
-#~ msgstr "普通（手動）"
-
-#~ msgid "tree(manual)"
-#~ msgstr "樹狀（手動）"
-
 #~ msgid ", ver: "
 #~ msgstr "，版本"