3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-19 06:41:14 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 5

post changes after merging BS1.7.4

Browse source 
Remove tracking etc..
This commit is contained in:
SoftFever 2023-08-26 18:24:13 +08:00
parent e65b11a831
commit 2a478ab4f9
615 changed files with 46215 additions and 54844 deletions
Download patch file Download diff file Expand all files Collapse all files

224
resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_000",
"name": "Elegoo Neptune 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune",
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "200",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune",
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "200",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_001",
"name": "Elegoo Neptune 2 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 2 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune2_buildplate_model.stl",
"bed_texture": "elegoo_neptune2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

246
resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
View file

@ -1,131 +1,131 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_002",
"name": "Elegoo Neptune 2D 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2D",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 2D 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2D",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
"extruder_colour": [
"#FCE94F",
"#FCE94F"
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0"
"0x0"
],
"nozzle_diameter": [
"0.4",
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"5",
"5"
],
"retraction_speed": [
"60",
"60"
],
"retract_length_toolchange": [
"1",
"1"
],
"deretraction_speed": [
"40",
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"nozzle_diameter": [
"0.4",
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"5",
"5"
],
"retraction_speed": [
"60",
"60"
],
"retract_length_toolchange": [
"1",
"1"
],
"deretraction_speed": [
"40",
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune2d_buildplate_model.stl",
"bed_texture": "elegoo_neptune2d_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_003",
"name": "Elegoo Neptune 2S 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2S",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 2S 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 2S",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune2s_buildplate_model.stl",
"bed_texture": "elegoo_neptune2s_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

218
resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
View file

@ -1,111 +1,111 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_008",
"name": "Elegoo Neptune 3 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 3 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_004",
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Max",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Max",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune3max_buildplate_model.stl",
"bed_texture": "elegoo_neptune3max_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_005",
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Plus",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Plus",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune3plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune3plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_006",
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune 3 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune3pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune3pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune3_buildplate_model.stl",
"bed_texture": "elegoo_neptune3_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

224
resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
View file

@ -1,114 +1,114 @@
{
"type": "machine",
"setting_id": "GM_Elegoo_007",
"name": "Elegoo Neptune X 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune X",
"default_print_profile": "0.20mm Standard @Elegoo NeptuneX",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
"type": "machine",
"setting_id": "GM001",
"name": "Elegoo Neptune X 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_elegoo_common",
"printer_model": "Elegoo Neptune X",
"default_print_profile": "0.20mm Standard @Elegoo NeptuneX",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Elegoo Generic PLA"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune X.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptunex_buildplate_model.stl",
"bed_texture": "elegoo_neptunex_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

2
resources/profiles/Elegoo/machine/Elegoo Neptune.json
View file

@ -8,5 +8,5 @@
"bed_model": "elegoo_neptune_buildplate_model.stl",
"bed_texture": "elegoo_neptune_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
"default_materials": "Elegoo Generic ABS;Elegoo Generic PETG;Elegoo Generic PLA"
}

1
resources/profiles/Elegoo/machine/fdm_machine_common.json
View file

@ -112,6 +112,7 @@
],
"z_lift_type": "NormalLift",
"default_print_profile": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "",
"machine_end_gcode": ""
}