diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json
index 49c2731f11..d81ee374d3 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.22",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.26",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.25",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.25",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.22",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.18",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "4",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.22",
 	"top_shell_layers": "5",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json
index 155366410f..e5cf06d9c9 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.62",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.66",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.65",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.65",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.62",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.58",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "4",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.62",
 	"top_shell_layers": "5",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json
index e5ac797e01..05ce7dedb6 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.82",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.86",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.85",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.85",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.82",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.78",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "4",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.82",
 	"top_shell_layers": "5",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json
index d2f8ed8eef..e853f6c1ed 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.22",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.26",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.25",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.25",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.22",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.18",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "3",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.22",
 	"top_shell_layers": "6",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json
index f6dab37b93..ebc603d799 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.62",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.66",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.65",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.65",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.62",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.58",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "3",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.62",
 	"top_shell_layers": "6",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json
index f0989462d4..f36ead5e2e 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.82",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.86",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.85",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.85",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.82",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.2",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.78",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "3",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.82",
 	"top_shell_layers": "6",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json
index b289cfe41a..25a4d63c64 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.22",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.26",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.25",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.25",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.22",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.18",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.22",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json
index d55e0c5059..8d46cf4f35 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.62",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.66",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.65",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.65",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.62",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.58",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.62",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json
index 84e860b5d9..c6036b20da 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.82",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.86",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.85",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.85",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.82",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.78",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.82",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json
index ad47ef425f..6a77bbefc1 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.22",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.26",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.25",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.25",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.22",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.18",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.22",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json
index 5a8332d664..f519a75383 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.62",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.66",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.65",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.65",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.62",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.58",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.62",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json
index 597b70e6f1..869e3ffb42 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json	
@@ -25,9 +25,9 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "0.82",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.46",
+	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
 	"outer_wall_acceleration": "1000",
-	"initial_layer_line_width": "0.46",
+	"initial_layer_line_width": "0.86",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.85",
 	"infill_wall_overlap": "15%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.85",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.82",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.78",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "2",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "0.82",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "30",