mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-07-07 06:57:36 -06:00
Prusa CORE One Profiles (#9352)
* update profiles from3b3aa19543* capitalize SPEED * Capitalize SPEED * sync withcac592a462 (diff-b2ec55404a83d29c6c998171282a456702f47a98bade1a24aa583ea65c4314e0)* sync with1d5331b7d9there was an issue with the filament start gcode conversion that appears to make the gcode invalid * tweak Prusa CORE One --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Brandon Wees
GitHub
parent
a4f35e0291
commit
2304e6a9cd
145 changed files with 5176 additions and 2 deletions
|
|
@ -1,6 +1,6 @@
|
||||||
{
|
{
|
||||||
"name": "Prusa",
|
"name": "Prusa",
|
||||||
"version": "02.03.00.03",
|
"version": "02.03.00.05",
|
||||||
"force_update": "0",
|
"force_update": "0",
|
||||||
"description": "Prusa configurations",
|
"description": "Prusa configurations",
|
||||||
"machine_model_list": [
|
"machine_model_list": [
|
||||||
|
|
@ -39,6 +39,14 @@
|
||||||
{
|
{
|
||||||
"name": "MK4S HF",
|
"name": "MK4S HF",
|
||||||
"sub_path": "machine/Prusa MK4S HF.json"
|
"sub_path": "machine/Prusa MK4S HF.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One",
|
||||||
|
"sub_path": "machine/Prusa CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One HF",
|
||||||
|
"sub_path": "machine/Prusa CORE One HF.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"process_list": [
|
"process_list": [
|
||||||
|
|
@ -806,6 +814,14 @@
|
||||||
"name": "0.28mm DRAFT @MK4S HF0.4",
|
"name": "0.28mm DRAFT @MK4S HF0.4",
|
||||||
"sub_path": "process/0.28mm DRAFT @MK4S HF0.4.json"
|
"sub_path": "process/0.28mm DRAFT @MK4S HF0.4.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SOLUBLE FULL @MK4S 0.4",
|
||||||
|
"sub_path": "process/0.20mm SOLUBLE FULL @MK4S 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SOLUBLE INTERFACE @MK4S 0.4",
|
||||||
|
"sub_path": "process/0.20mm SOLUBLE INTERFACE @MK4S 0.4.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "0.30mm DETAIL @MK4S 0.8",
|
"name": "0.30mm DETAIL @MK4S 0.8",
|
||||||
"sub_path": "process/0.30mm DETAIL @MK4S 0.8.json"
|
"sub_path": "process/0.30mm DETAIL @MK4S 0.8.json"
|
||||||
|
|
@ -873,8 +889,223 @@
|
||||||
{
|
{
|
||||||
"name": "0.55mm STRUCTURAL @MK4S HF0.8",
|
"name": "0.55mm STRUCTURAL @MK4S HF0.8",
|
||||||
"sub_path": "process/0.55mm STRUCTURAL @MK4S HF0.8.json"
|
"sub_path": "process/0.55mm STRUCTURAL @MK4S HF0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.28mm DRAFT @CORE One HF 0.4",
|
||||||
|
"sub_path": "process/0.28mm DRAFT @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SOLUBLE FULL @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.20mm SOLUBLE FULL @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SOLUBLE INTERFACE @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.20mm SOLUBLE INTERFACE @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm SPEED @CORE One HF 0.4",
|
||||||
|
"sub_path": "process/0.25mm SPEED @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm STRUCTURAL @CORE One HF 0.4",
|
||||||
|
"sub_path": "process/0.25mm STRUCTURAL @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One HF 0.4",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm STRUCTURAL @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.20mm STRUCTURAL @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm SPEED @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.15mm SPEED @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm SPEED @CORE One HF 0.4",
|
||||||
|
"sub_path": "process/0.15mm SPEED @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm STRUCTURAL @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.15mm STRUCTURAL @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.10mm FAST DETAIL @CORE One 0.4",
|
||||||
|
"sub_path": "process/0.10mm FAST DETAIL @CORE One 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.05mm DETAIL @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.05mm DETAIL @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.07mm DETAIL @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.07mm DETAIL @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.12mm SPEED @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.12mm SPEED @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.12mm STRUCTURAL @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.12mm STRUCTURAL @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm SPEED @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.15mm SPEED @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm STRUCTURAL @CORE One 0.25",
|
||||||
|
"sub_path": "process/0.15mm STRUCTURAL @CORE One 0.25.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.12mm STRUCTURAL @CORE One 0.3",
|
||||||
|
"sub_path": "process/0.12mm STRUCTURAL @CORE One 0.3.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.16mm STRUCTURAL @CORE One 0.3",
|
||||||
|
"sub_path": "process/0.16mm STRUCTURAL @CORE One 0.3.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.16mm SPEED @CORE One 0.3",
|
||||||
|
"sub_path": "process/0.16mm SPEED @CORE One 0.3.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One 0.3",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One 0.3.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm STRUCTURAL @CORE One 0.3",
|
||||||
|
"sub_path": "process/0.20mm STRUCTURAL @CORE One 0.3.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.10mm STRUCTURAL @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.10mm STRUCTURAL @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm STRUCTURAL @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.15mm STRUCTURAL @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One HF 0.5",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm STRUCTURAL @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.20mm STRUCTURAL @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm SPEED @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.25mm SPEED @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm SPEED @CORE One HF 0.5",
|
||||||
|
"sub_path": "process/0.25mm SPEED @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm STRUCTURAL @CORE One 0.5",
|
||||||
|
"sub_path": "process/0.25mm STRUCTURAL @CORE One 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm SPEED @CORE One HF 0.5",
|
||||||
|
"sub_path": "process/0.32mm SPEED @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm STRUCTURAL @CORE One HF 0.5",
|
||||||
|
"sub_path": "process/0.32mm STRUCTURAL @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.15mm STRUCTURAL @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.15mm STRUCTURAL @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm SPEED @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.20mm SPEED @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.20mm STRUCTURAL @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.20mm STRUCTURAL @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm SPEED @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.25mm SPEED @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm SPEED @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.25mm SPEED @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.25mm STRUCTURAL @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.25mm STRUCTURAL @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm SPEED @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.32mm SPEED @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm STRUCTURAL @CORE One 0.6",
|
||||||
|
"sub_path": "process/0.32mm STRUCTURAL @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm SPEED @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.32mm SPEED @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.32mm STRUCTURAL @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.32mm STRUCTURAL @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm SPEED @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.40mm SPEED @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm STRUCTURAL @CORE One HF 0.6",
|
||||||
|
"sub_path": "process/0.40mm STRUCTURAL @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm DETAIL @CORE One 0.8",
|
||||||
|
"sub_path": "process/0.30mm DETAIL @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm SPEED @CORE One HF 0.8",
|
||||||
|
"sub_path": "process/0.30mm SPEED @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.30mm STRUCTURAL @CORE One HF 0.8",
|
||||||
|
"sub_path": "process/0.30mm STRUCTURAL @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm QUALITY @CORE One 0.8",
|
||||||
|
"sub_path": "process/0.40mm QUALITY @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm SPEED @CORE One HF 0.8",
|
||||||
|
"sub_path": "process/0.40mm SPEED @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.40mm STRUCTURAL @CORE One HF 0.8",
|
||||||
|
"sub_path": "process/0.40mm STRUCTURAL @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.55mm DRAFT @CORE One 0.8",
|
||||||
|
"sub_path": "process/0.55mm DRAFT @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.55mm SPEED @CORE One HF 0.8",
|
||||||
|
"sub_path": "process/0.55mm SPEED @CORE One HF 0.8.json"
|
||||||
}
|
}
|
||||||
|
|
||||||
],
|
],
|
||||||
"filament_list": [
|
"filament_list": [
|
||||||
{
|
{
|
||||||
|
|
@ -1592,6 +1823,302 @@
|
||||||
{
|
{
|
||||||
"name": "Prusa Generic PLA Silk @MK4S 0.8",
|
"name": "Prusa Generic PLA Silk @MK4S 0.8",
|
||||||
"sub_path": "filament/Prusa Generic PLA Silk @MK4S 0.8.json"
|
"sub_path": "filament/Prusa Generic PLA Silk @MK4S 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic ABS @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic ASA @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic PETG @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA Silk @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA Silk @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic PLA Silk @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic TPU @CORE One",
|
||||||
|
"sub_path": "filament/Prusa Generic TPU @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic TPU @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusa Generic TPU @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa Generic TPU @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusa Generic TPU @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusament ASA @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PA-CF @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PA-CF @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PA-CF @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PA-CF @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PA-CF @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PA-CF @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC-CF @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PC-CF @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC-CF @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PC-CF @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PC-CF @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PC-CF @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.4",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One HF 0.4.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.5",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One HF 0.5.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.6",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One HF 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.8",
|
||||||
|
"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PVB @CORE One",
|
||||||
|
"sub_path": "filament/Prusament PVB @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PVB @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament PVB @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament PVB @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament PVB @CORE One 0.8.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament rPLA @CORE One",
|
||||||
|
"sub_path": "filament/Prusament rPLA @CORE One.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament rPLA @CORE One 0.6",
|
||||||
|
"sub_path": "filament/Prusament rPLA @CORE One 0.6.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusament rPLA @CORE One 0.8",
|
||||||
|
"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"machine_list": [
|
"machine_list": [
|
||||||
|
|
@ -1778,6 +2305,46 @@
|
||||||
{
|
{
|
||||||
"name": "Prusa MK4S HF0.8 nozzle",
|
"name": "Prusa MK4S HF0.8 nozzle",
|
||||||
"sub_path": "machine/Prusa MK4S HF0.8 nozzle.json"
|
"sub_path": "machine/Prusa MK4S HF0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One HF 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One HF 0.5 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One HF 0.5 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One HF 0.6 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One HF 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One HF 0.8 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One HF 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.25 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.25 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.3 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.3 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.4 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.5 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.5 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.6 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.6 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "Prusa CORE One 0.8 nozzle",
|
||||||
|
"sub_path": "machine/Prusa CORE One 0.8 nozzle.json"
|
||||||
}
|
}
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|
|
||||||
BIN
resources/profiles/Prusa/Prusa CORE One HF_cover.png
Normal file
BIN
resources/profiles/Prusa/Prusa CORE One HF_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 50 KiB |
BIN
resources/profiles/Prusa/Prusa CORE One_cover.png
Normal file
BIN
resources/profiles/Prusa/Prusa CORE One_cover.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 50 KiB |
457
resources/profiles/Prusa/coreone.svg
Normal file
457
resources/profiles/Prusa/coreone.svg
Normal file
|
|
@ -0,0 +1,457 @@
|
||||||
|
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||||
|
<svg
|
||||||
|
id="svg3128"
|
||||||
|
width="710.10004"
|
||||||
|
height="624.64417"
|
||||||
|
viewBox="0 0 710.10006 624.64415"
|
||||||
|
version="1.1"
|
||||||
|
xml:space="preserve"
|
||||||
|
sodipodi:docname="coreone_250x220.svg"
|
||||||
|
inkscape:version="1.1 (c68e22c387, 2021-05-23)"
|
||||||
|
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||||
|
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||||
|
xmlns="http://www.w3.org/2000/svg"
|
||||||
|
xmlns:svg="http://www.w3.org/2000/svg"><sodipodi:namedview
|
||||||
|
id="namedview93"
|
||||||
|
pagecolor="#505050"
|
||||||
|
bordercolor="#eeeeee"
|
||||||
|
borderopacity="1"
|
||||||
|
inkscape:pageshadow="0"
|
||||||
|
inkscape:pageopacity="0"
|
||||||
|
inkscape:pagecheckerboard="0"
|
||||||
|
showgrid="false"
|
||||||
|
inkscape:zoom="0.69879785"
|
||||||
|
inkscape:cx="389.95541"
|
||||||
|
inkscape:cy="404.2657"
|
||||||
|
inkscape:window-width="1920"
|
||||||
|
inkscape:window-height="1129"
|
||||||
|
inkscape:window-x="-8"
|
||||||
|
inkscape:window-y="-8"
|
||||||
|
inkscape:window-maximized="1"
|
||||||
|
inkscape:current-layer="svg3128" /><defs
|
||||||
|
id="defs119"><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath121"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-422.26871,-18.997898)"
|
||||||
|
id="path121" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath123"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-415.25041,-14.8056)"
|
||||||
|
id="path123" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath125"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-262.33801,-23.423903)"
|
||||||
|
id="path125" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath127"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-276.75361,-23.730301)"
|
||||||
|
id="path127" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath129"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-303.22041,-20.880601)"
|
||||||
|
id="path129" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath131"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-308.00361,-20.103398)"
|
||||||
|
id="path131" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath133"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-324.03941,-21.021803)"
|
||||||
|
id="path133" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath135"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-350.61111,-25.685003)"
|
||||||
|
id="path135" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath137"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-358.75971,-22.858898)"
|
||||||
|
id="path137" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath139"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-376.88051,-23.730301)"
|
||||||
|
id="path139" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath141"><path
|
||||||
|
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||||
|
transform="translate(-389.25391,-31.337401)"
|
||||||
|
id="path141" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath6"><path
|
||||||
|
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||||
|
transform="translate(-35.267201,-32.161503)"
|
||||||
|
id="path6" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath4"><path
|
||||||
|
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||||
|
transform="translate(-61.726601,-60.946602)"
|
||||||
|
id="path4" /></clipPath><clipPath
|
||||||
|
clipPathUnits="userSpaceOnUse"
|
||||||
|
id="clipPath2"><path
|
||||||
|
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||||
|
transform="translate(-70.093402,-32.743901)"
|
||||||
|
id="path2" /></clipPath></defs><line
|
||||||
|
id="line2794"
|
||||||
|
x1="0.71597999"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="0.71597999"
|
||||||
|
y2="623.92816"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.43196;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||||
|
id="line2796"
|
||||||
|
x1="142.40959"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="142.40959"
|
||||||
|
y2="623.50958"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.43199px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2798"
|
||||||
|
x1="284.2016"
|
||||||
|
y1="1.0246977"
|
||||||
|
x2="284.2016"
|
||||||
|
y2="567.26648"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.36584px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2800"
|
||||||
|
x1="709.38403"
|
||||||
|
y1="623.92816"
|
||||||
|
x2="709.38403"
|
||||||
|
y2="1.0816071"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.43199px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2802"
|
||||||
|
x1="0.7100839"
|
||||||
|
y1="596"
|
||||||
|
x2="227.04564"
|
||||||
|
y2="596"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.3989;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none" /><line
|
||||||
|
id="line2802-8"
|
||||||
|
x1="483.12857"
|
||||||
|
y1="596.17096"
|
||||||
|
x2="708.96826"
|
||||||
|
y2="596.17096"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none" /><line
|
||||||
|
id="line2806"
|
||||||
|
x1="1.2000103"
|
||||||
|
y1="454.30002"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="454.30002"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2808"
|
||||||
|
x1="1.2000103"
|
||||||
|
y1="312.60001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="312.60001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2810"
|
||||||
|
x1="1.2000103"
|
||||||
|
y1="170.8"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="170.8"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2812"
|
||||||
|
x1="1.2000103"
|
||||||
|
y1="29.100002"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="29.100002"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2814"
|
||||||
|
x1="709.40002"
|
||||||
|
y1="0.69999999"
|
||||||
|
x2="0.70001024"
|
||||||
|
y2="0.69999999"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2816"
|
||||||
|
x1="425.92242"
|
||||||
|
y1="1.1459428"
|
||||||
|
x2="425.92242"
|
||||||
|
y2="567.11206"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.49174px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2820"
|
||||||
|
x1="567.63226"
|
||||||
|
y1="1.2509574"
|
||||||
|
x2="567.63226"
|
||||||
|
y2="622.75647"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.56321px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2826"
|
||||||
|
x1="85.812141"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="85.812141"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2828"
|
||||||
|
x1="114.11087"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="114.11087"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2830"
|
||||||
|
x1="170.80832"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="170.80832"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2832"
|
||||||
|
x1="199.10706"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="199.10706"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2834"
|
||||||
|
x1="227.50577"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="227.50577"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2836"
|
||||||
|
x1="255.80449"
|
||||||
|
y1="1.0630002"
|
||||||
|
x2="255.80449"
|
||||||
|
y2="567.53357"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.390217px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2838"
|
||||||
|
x1="312.47754"
|
||||||
|
y1="1.0446645"
|
||||||
|
x2="312.47754"
|
||||||
|
y2="567.58325"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.390326px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2840"
|
||||||
|
x1="340.88852"
|
||||||
|
y1="1.0446645"
|
||||||
|
x2="340.88852"
|
||||||
|
y2="567.58325"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.390326px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2842"
|
||||||
|
x1="680.98535"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="680.98535"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2844"
|
||||||
|
x1="29.1147"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="29.1147"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2846"
|
||||||
|
x1="57.413429"
|
||||||
|
y1="1.0816071"
|
||||||
|
x2="57.413429"
|
||||||
|
y2="623.82355"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.40914px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2848"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="482.60001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="482.60001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2850"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="511"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="511"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2852"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="539.29999"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="539.29999"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2854"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="567.70001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="567.70001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2854-7"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="623.90002"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="623.90002"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:1.4;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||||
|
id="line2856"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="425.90002"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="425.90002"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2858"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="397.60001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="397.60001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2860"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="369.20001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="369.20001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2862"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="340.90002"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="340.90002"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2864"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="284.20001"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="284.20001"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2866"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="255.8"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="255.8"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2868"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="227.5"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="227.5"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2870"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="199.2"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="199.2"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2872"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="142.5"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="142.5"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2874"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="114.09999"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="114.09999"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2876"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="85.799995"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="85.799995"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2878"
|
||||||
|
x1="1.5000103"
|
||||||
|
y1="57.399998"
|
||||||
|
x2="709.40002"
|
||||||
|
y2="57.399998"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.4px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2880"
|
||||||
|
x1="369.19958"
|
||||||
|
y1="1.0677756"
|
||||||
|
x2="369.19958"
|
||||||
|
y2="567.58557"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.416833px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2884"
|
||||||
|
x1="397.61011"
|
||||||
|
y1="1.0809259"
|
||||||
|
x2="397.61011"
|
||||||
|
y2="567.65735"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.426434px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2888"
|
||||||
|
x1="454.177"
|
||||||
|
y1="1.0572188"
|
||||||
|
x2="454.177"
|
||||||
|
y2="567.38892"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.426682;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||||
|
id="line2892"
|
||||||
|
x1="482.61209"
|
||||||
|
y1="1.117534"
|
||||||
|
x2="482.61209"
|
||||||
|
y2="623.43823"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.44687px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2896"
|
||||||
|
x1="510.91641"
|
||||||
|
y1="1.117534"
|
||||||
|
x2="510.91641"
|
||||||
|
y2="623.43823"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.44687px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2900"
|
||||||
|
x1="539.32092"
|
||||||
|
y1="1.117534"
|
||||||
|
x2="539.32092"
|
||||||
|
y2="623.43823"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.44687px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2904"
|
||||||
|
x1="595.95178"
|
||||||
|
y1="1.1552095"
|
||||||
|
x2="595.95178"
|
||||||
|
y2="623.36298"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.44691px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2906"
|
||||||
|
x1="624.26642"
|
||||||
|
y1="1.1552095"
|
||||||
|
x2="624.26642"
|
||||||
|
y2="623.36298"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.44691px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||||
|
id="line2908"
|
||||||
|
x1="652.68658"
|
||||||
|
y1="1.1109135"
|
||||||
|
x2="652.68658"
|
||||||
|
y2="623.51703"
|
||||||
|
style="fill:none;stroke:#ffffff;stroke-width:0.436853px;stroke-linecap:round;stroke-linejoin:round" /><path
|
||||||
|
id="path120"
|
||||||
|
d="M 0,0 C 0.361,0.533 0.624,1.134 0.789,1.802 0.954,2.469 1.036,3.156 1.036,3.862 1.036,4.6 0.954,5.314 0.789,6.005 0.624,6.696 0.361,7.313 0,7.854 -0.361,8.396 -0.832,8.828 -1.413,9.15 -1.994,9.471 -2.701,9.632 -3.533,9.632 -4.365,9.632 -5.071,9.471 -5.652,9.15 -6.233,8.828 -6.704,8.396 -7.065,7.854 -7.427,7.313 -7.689,6.696 -7.854,6.005 -8.019,5.314 -8.102,4.6 -8.102,3.862 c 0,-0.706 0.083,-1.393 0.248,-2.06 0.165,-0.668 0.427,-1.269 0.789,-1.802 0.361,-0.534 0.832,-0.962 1.413,-1.284 0.581,-0.322 1.287,-0.482 2.119,-0.482 0.832,0 1.539,0.16 2.12,0.482 C -0.832,-0.962 -0.361,-0.534 0,0"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,420.81641,600.14683)"
|
||||||
|
clip-path="url(#clipPath121)" /><path
|
||||||
|
id="path122"
|
||||||
|
d="m 0,0 c -1.021,0.455 -1.884,1.075 -2.591,1.86 -0.706,0.786 -1.248,1.712 -1.625,2.78 -0.377,1.067 -0.565,2.205 -0.565,3.415 0,1.24 0.188,2.402 0.565,3.485 0.377,1.084 0.919,2.026 1.625,2.826 0.707,0.801 1.57,1.429 2.591,1.884 1.021,0.456 2.182,0.683 3.486,0.683 1.303,0 2.465,-0.227 3.485,-0.683 1.021,-0.455 1.884,-1.083 2.591,-1.884 0.707,-0.8 1.248,-1.742 1.625,-2.826 0.377,-1.083 0.565,-2.245 0.565,-3.485 0,-1.21 -0.188,-2.348 -0.565,-3.415 C 10.81,3.572 10.269,2.646 9.562,1.86 8.855,1.075 7.992,0.455 6.971,0 5.951,-0.455 4.789,-0.683 3.486,-0.683 2.182,-0.683 1.021,-0.455 0,0 M 17.014,16.533 24.032,5.252 h 0.047 v 11.281 h 3.462 V -0.283 H 23.844 L 16.849,10.975 H 16.802 V -0.283 H 13.34 v 16.816 z m 25.501,0 V 13.424 H 33.637 V 9.821 h 8.148 V 6.948 H 33.637 V 2.826 h 9.067 V -0.283 H 29.939 V 16.533 Z M 46.901,-0.89 v 18.028 c 0,1.869 -1.515,3.385 -3.385,3.385 H -5.593 c -1.87,0 -3.385,-1.516 -3.385,-3.385 V -0.89 c 0,-1.87 1.515,-3.386 3.385,-3.386 h 49.109 c 1.87,0 3.385,1.516 3.385,3.386"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,413.36958,604.59511)"
|
||||||
|
clip-path="url(#clipPath123)" /><path
|
||||||
|
id="path124"
|
||||||
|
d="M 0,0 H 2.873 C 3.297,0 3.705,0.031 4.098,0.094 4.49,0.157 4.836,0.279 5.134,0.459 5.432,0.64 5.672,0.895 5.852,1.225 6.033,1.554 6.123,1.986 6.123,2.52 6.123,3.054 6.033,3.486 5.852,3.815 5.672,4.145 5.432,4.4 5.134,4.581 4.836,4.761 4.49,4.883 4.098,4.946 3.705,5.008 3.297,5.04 2.873,5.04 H 0 Z M -3.698,7.913 H 3.886 C 4.938,7.913 5.833,7.76 6.571,7.454 7.308,7.148 7.909,6.744 8.372,6.241 8.835,5.739 9.173,5.161 9.385,4.51 9.597,3.859 9.703,3.195 9.703,2.52 9.703,1.829 9.597,1.162 9.385,0.518 9.173,-0.126 8.835,-0.699 8.372,-1.201 7.909,-1.704 7.308,-2.108 6.571,-2.414 5.833,-2.72 4.938,-2.873 3.886,-2.873 H 0 v -6.029 h -3.698 z"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,251.1205,595.45057)"
|
||||||
|
clip-path="url(#clipPath125)" /><path
|
||||||
|
id="path126"
|
||||||
|
d="M 0,0 H 4.051 C 4.883,0 5.514,0.188 5.947,0.565 6.378,0.942 6.594,1.554 6.594,2.402 6.594,3.218 6.378,3.811 5.947,4.18 5.514,4.549 4.883,4.734 4.051,4.734 H 0 Z M -3.698,7.607 H 5.37 C 6.123,7.607 6.802,7.485 7.407,7.242 8.011,6.999 8.529,6.665 8.961,6.241 9.393,5.817 9.723,5.322 9.951,4.757 10.178,4.192 10.292,3.595 10.292,2.968 10.292,1.978 10.084,1.122 9.668,0.4 9.252,-0.322 8.573,-0.871 7.63,-1.248 v -0.047 c 0.456,-0.126 0.833,-0.318 1.131,-0.577 0.298,-0.259 0.542,-0.57 0.73,-0.931 0.189,-0.361 0.326,-0.75 0.412,-1.165 0.086,-0.417 0.145,-0.837 0.177,-1.261 0.015,-0.267 0.031,-0.581 0.047,-0.942 0.015,-0.361 0.043,-0.726 0.083,-1.095 0.039,-0.369 0.101,-0.726 0.188,-1.071 0.086,-0.346 0.216,-0.636 0.388,-0.872 H 7.089 C 6.979,-8.942 6.896,-8.648 6.842,-8.326 6.786,-8.004 6.739,-7.666 6.7,-7.313 6.661,-6.96 6.63,-6.599 6.606,-6.229 6.583,-5.861 6.547,-5.511 6.5,-5.181 6.374,-4.302 6.107,-3.659 5.699,-3.25 5.291,-2.842 4.624,-2.638 3.698,-2.638 H 0 v -6.571 h -3.698 z"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,266.41631,595.12547)"
|
||||||
|
clip-path="url(#clipPath127)" /><path
|
||||||
|
id="path128"
|
||||||
|
d="m 0,0 c 0,-2.277 -0.636,-3.973 -1.908,-5.087 -1.271,-1.115 -3.03,-1.672 -5.275,-1.672 -2.277,0 -4.039,0.553 -5.288,1.66 -1.248,1.107 -1.872,2.806 -1.872,5.099 v 10.457 h 3.698 V 0 c 0,-0.456 0.039,-0.903 0.118,-1.343 0.078,-0.439 0.243,-0.832 0.494,-1.177 0.251,-0.346 0.601,-0.62 1.048,-0.825 0.448,-0.204 1.048,-0.306 1.802,-0.306 1.319,0 2.229,0.295 2.732,0.884 0.502,0.588 0.753,1.511 0.753,2.767 V 10.457 H 0 Z"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,294.49913,598.14917)"
|
||||||
|
clip-path="url(#clipPath129)" /><path
|
||||||
|
id="path130"
|
||||||
|
d="m 0,0 c 0,-0.565 0.102,-1.045 0.306,-1.437 0.204,-0.392 0.475,-0.71 0.813,-0.954 0.337,-0.243 0.73,-0.424 1.177,-0.541 0.448,-0.118 0.923,-0.177 1.425,-0.177 0.33,0 0.683,0.027 1.06,0.083 0.377,0.054 0.73,0.16 1.06,0.317 0.33,0.157 0.604,0.373 0.824,0.648 0.22,0.275 0.33,0.624 0.33,1.048 0,0.456 -0.146,0.825 -0.436,1.107 C 6.268,0.377 5.888,0.616 5.417,0.812 4.946,1.008 4.412,1.174 3.815,1.307 3.219,1.44 2.614,1.593 2.002,1.766 1.374,1.923 0.762,2.116 0.165,2.343 -0.432,2.571 -0.966,2.865 -1.437,3.227 -1.908,3.588 -2.288,4.035 -2.579,4.569 -2.87,5.102 -3.015,5.762 -3.015,6.547 c 0,0.864 0.185,1.614 0.554,2.249 0.369,0.636 0.851,1.166 1.448,1.59 0.597,0.424 1.272,0.738 2.026,0.942 0.753,0.204 1.507,0.306 2.261,0.306 0.879,0 1.723,-0.098 2.531,-0.294 C 6.614,11.144 7.332,10.825 7.96,10.386 8.588,9.946 9.087,9.385 9.456,8.702 9.825,8.019 10.01,7.191 10.01,6.218 H 6.43 C 6.398,6.72 6.292,7.136 6.112,7.466 5.931,7.796 5.691,8.055 5.393,8.243 5.095,8.431 4.749,8.564 4.357,8.643 3.965,8.722 3.548,8.761 3.109,8.761 2.81,8.761 2.512,8.73 2.214,8.667 1.915,8.604 1.644,8.494 1.401,8.337 1.158,8.18 0.958,7.98 0.801,7.736 0.644,7.493 0.565,7.199 0.565,6.854 0.565,6.524 0.628,6.257 0.754,6.053 0.879,5.849 1.126,5.664 1.496,5.499 1.864,5.334 2.375,5.161 3.026,4.981 3.678,4.801 4.53,4.577 5.582,4.31 5.786,4.263 6.053,4.196 6.382,4.11 6.712,4.023 7.061,3.905 7.43,3.756 7.799,3.607 8.168,3.415 8.538,3.179 8.906,2.944 9.244,2.653 9.55,2.308 9.856,1.962 10.103,1.55 10.292,1.071 c 0.188,-0.478 0.283,-1.032 0.283,-1.66 0,-0.769 -0.15,-1.484 -0.448,-2.143 C 9.829,-3.391 9.385,-3.961 8.797,-4.44 8.208,-4.919 7.478,-5.295 6.606,-5.57 5.735,-5.844 4.726,-5.982 3.58,-5.982 c -0.927,0 -1.825,0.118 -2.697,0.353 -0.871,0.236 -1.637,0.597 -2.296,1.083 -0.66,0.487 -1.189,1.107 -1.59,1.861 -0.4,0.754 -0.593,1.649 -0.577,2.685 z"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,299.57439,598.97382)"
|
||||||
|
clip-path="url(#clipPath131)" /><path
|
||||||
|
id="path132"
|
||||||
|
d="M 0,0 H 4.357 L 2.237,6.171 H 2.19 Z M 0.353,10.316 H 4.145 L 10.434,-6.5 H 6.594 L 5.323,-2.755 H -0.966 L -2.284,-6.5 h -3.745 z"
|
||||||
|
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,316.58932,597.99935)"
|
||||||
|
clip-path="url(#clipPath133)" /><path
|
||||||
|
id="path134"
|
||||||
|
d="m 0,0 c -0.063,0.424 -0.204,0.813 -0.424,1.166 -0.22,0.353 -0.495,0.663 -0.824,0.93 -0.33,0.267 -0.703,0.475 -1.119,0.624 -0.416,0.149 -0.852,0.224 -1.307,0.224 -0.833,0 -1.539,-0.161 -2.12,-0.483 C -6.375,2.139 -6.846,1.708 -7.207,1.166 -7.568,0.624 -7.831,0.008 -7.996,-0.683 c -0.165,-0.691 -0.247,-1.405 -0.247,-2.143 0,-0.707 0.082,-1.394 0.247,-2.061 0.165,-0.667 0.428,-1.268 0.789,-1.801 0.361,-0.535 0.832,-0.963 1.413,-1.284 0.581,-0.322 1.287,-0.483 2.12,-0.483 1.13,0 2.014,0.349 2.65,1.048 0.635,0.698 1.024,1.605 1.165,2.72 h 3.58 C 3.627,-5.739 3.383,-6.688 2.991,-7.537 2.598,-8.384 2.08,-9.107 1.437,-9.703 0.793,-10.3 0.039,-10.759 -0.824,-11.081 c -0.864,-0.322 -1.814,-0.483 -2.85,-0.483 -1.303,0 -2.465,0.228 -3.486,0.683 -1.02,0.455 -1.884,1.076 -2.591,1.861 -0.706,0.785 -1.248,1.711 -1.624,2.779 -0.377,1.067 -0.566,2.206 -0.566,3.415 0,1.24 0.189,2.402 0.566,3.486 0.376,1.083 0.918,2.025 1.624,2.826 0.707,0.801 1.571,1.428 2.591,1.884 1.021,0.455 2.183,0.683 3.486,0.683 0.926,0 1.801,-0.134 2.626,-0.401 C -0.224,5.385 0.514,4.997 1.166,4.487 1.817,3.976 2.355,3.345 2.779,2.591 3.203,1.837 3.47,0.973 3.58,0 Z"
|
||||||
|
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,344.78346,593.05141)"
|
||||||
|
clip-path="url(#clipPath135)" /><path
|
||||||
|
id="path136"
|
||||||
|
d="m 0,0 c 0,-0.707 0.082,-1.394 0.247,-2.061 0.165,-0.667 0.428,-1.268 0.789,-1.801 0.361,-0.534 0.832,-0.962 1.413,-1.284 0.581,-0.322 1.287,-0.483 2.12,-0.483 0.832,0 1.539,0.161 2.12,0.483 0.58,0.322 1.051,0.75 1.413,1.284 0.361,0.533 0.624,1.134 0.789,1.801 C 9.055,-1.394 9.138,-0.707 9.138,0 9.138,0.738 9.055,1.452 8.891,2.143 8.726,2.834 8.463,3.45 8.102,3.992 7.74,4.534 7.269,4.965 6.689,5.287 6.108,5.609 5.401,5.77 4.569,5.77 3.736,5.77 3.03,5.609 2.449,5.287 1.868,4.965 1.397,4.534 1.036,3.992 0.675,3.45 0.412,2.834 0.247,2.143 0.082,1.452 0,0.738 0,0 m -3.697,0 c 0,1.24 0.188,2.402 0.565,3.486 0.377,1.083 0.918,2.025 1.625,2.826 0.706,0.801 1.57,1.428 2.59,1.884 1.021,0.455 2.183,0.683 3.486,0.683 1.303,0 2.465,-0.228 3.486,-0.683 C 9.075,7.74 9.939,7.113 10.645,6.312 11.352,5.511 11.894,4.569 12.27,3.486 12.647,2.402 12.836,1.24 12.836,0 12.836,-1.209 12.647,-2.348 12.27,-3.415 11.894,-4.483 11.352,-5.409 10.645,-6.194 9.939,-6.979 9.075,-7.599 8.055,-8.055 7.034,-8.51 5.872,-8.738 4.569,-8.738 c -1.303,0 -2.465,0.228 -3.486,0.683 -1.02,0.456 -1.884,1.076 -2.59,1.861 -0.707,0.785 -1.248,1.711 -1.625,2.779 -0.377,1.067 -0.565,2.206 -0.565,3.415"
|
||||||
|
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,353.42961,596.05008)"
|
||||||
|
clip-path="url(#clipPath137)" /><path
|
||||||
|
id="path138"
|
||||||
|
d="M 0,0 H 4.051 C 4.883,0 5.514,0.188 5.947,0.565 6.378,0.942 6.594,1.554 6.594,2.402 6.594,3.218 6.378,3.811 5.947,4.18 5.514,4.549 4.883,4.734 4.051,4.734 H 0 Z M -3.698,7.607 H 5.37 C 6.123,7.607 6.802,7.485 7.407,7.242 8.011,6.999 8.529,6.665 8.961,6.241 9.393,5.817 9.723,5.322 9.951,4.757 10.178,4.192 10.292,3.595 10.292,2.968 10.292,1.978 10.084,1.122 9.668,0.4 9.252,-0.322 8.573,-0.871 7.63,-1.248 v -0.047 c 0.456,-0.126 0.833,-0.318 1.131,-0.577 0.298,-0.259 0.542,-0.57 0.73,-0.931 0.189,-0.361 0.326,-0.75 0.412,-1.165 0.086,-0.417 0.145,-0.837 0.177,-1.261 0.015,-0.267 0.031,-0.581 0.047,-0.942 0.015,-0.361 0.043,-0.726 0.083,-1.095 0.039,-0.369 0.101,-0.726 0.188,-1.071 0.086,-0.346 0.216,-0.636 0.388,-0.872 H 7.089 C 6.979,-8.942 6.896,-8.648 6.842,-8.326 6.786,-8.004 6.739,-7.666 6.7,-7.313 6.661,-6.96 6.63,-6.599 6.606,-6.229 6.583,-5.861 6.547,-5.511 6.5,-5.181 6.374,-4.302 6.107,-3.659 5.699,-3.25 5.291,-2.842 4.624,-2.638 3.698,-2.638 H 0 v -6.571 h -3.698 z"
|
||||||
|
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,372.65686,595.12547)"
|
||||||
|
clip-path="url(#clipPath139)" /><path
|
||||||
|
id="path140"
|
||||||
|
d="M 0,0 H 12.577 V -3.109 H 3.698 v -3.603 h 8.148 V -9.585 H 3.698 v -4.122 h 9.067 v -3.109 H 0 Z"
|
||||||
|
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||||
|
transform="matrix(1.061059,0,0,-1.061059,385.78576,587.05389)"
|
||||||
|
clip-path="url(#clipPath141)" /></svg>
|
||||||
|
After Width: | Height: | Size: 25 KiB |
BIN
resources/profiles/Prusa/coreone_bed.stl
Normal file
BIN
resources/profiles/Prusa/coreone_bed.stl
Normal file
Binary file not shown.
|
|
@ -0,0 +1,12 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One 0.6",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One 0.8",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.4",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.5",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"34"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"36"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ABS @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One HF 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,93 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"27.82"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.04"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ABS @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"ABS"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Generic"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_abs",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ABS @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One 0.6",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"255"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One 0.8",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"26"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.4",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.5",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"34"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"36"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,93 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"35.28"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.07"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic ASA @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"ASA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_asa",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic ASA @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,39 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"22"
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"22"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.4",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.5",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"31"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,42 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"37"
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,111 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"27.82"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PETG @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PETG"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Generic"
|
||||||
|
],
|
||||||
|
"filament_wipe": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"1.5"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"5"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PETG @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One 0.6",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"19"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"22"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.4",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.5",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"11"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"19"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,102 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.4"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PLA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Generic"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA Silk @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA Silk @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA Silk @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic PLA Silk @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,104 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.4"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic PLA Silk @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"7"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PLA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Generic"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic PLA Silk @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic TPU @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"3.5"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic TPU @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic TPU @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic TPU @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"7.5"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa Generic TPU @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic TPU @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,113 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"82"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.22"
|
||||||
|
],
|
||||||
|
"filament_deretraction_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.08"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusa Generic TPU @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"2.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_retraction_length": [
|
||||||
|
"2.5"
|
||||||
|
],
|
||||||
|
"filament_retraction_minimum_travel": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"filament_retraction_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"FLEX"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Generic"
|
||||||
|
],
|
||||||
|
"filament_wipe": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_flex",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa Generic TPU @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One 0.6",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"255"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One 0.8",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"26"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.4",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.5",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"34"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"36"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament ASA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,93 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"35.28"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.07"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament ASA @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"ASA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_asa",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament ASA @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"18"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PA-CF @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PA-CF @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PA-CF @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PA-CF @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PA-CF @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PA-CF @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,98 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"124.99"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.11"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.05"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PA-CF @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"6.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pa",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PA-CF @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"285"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"275"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"18"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"24"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.4",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.5",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"36"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC Blend @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One HF 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,96 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"51.53"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.22"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC Blend @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PC"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pc",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC Blend @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"275"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"275"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"18"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC-CF @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"13"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC-CF @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC-CF @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"280"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC-CF @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"18"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PC-CF @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC-CF @CORE One 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,98 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"74.99"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.22"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.04"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PC-CF @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PC"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pc",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PC-CF @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"285"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"285"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"22"
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One 0.8",
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"24"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.4",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.5",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"31"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,42 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"37"
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PETG @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
111
resources/profiles/Prusa/filament/Prusament PETG @CORE One.json
Normal file
111
resources/profiles/Prusa/filament/Prusament PETG @CORE One.json
Normal file
|
|
@ -0,0 +1,111 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"29.99"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PETG @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_retract_before_wipe": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PETG"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_wipe": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"1.5"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"5"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"130"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PETG @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15.5"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"19"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One HF 0.4",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"24"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.4",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One HF 0.5",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"27"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.5",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"11"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One HF 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.6",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One HF 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"37"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One HF 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"19"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
102
resources/profiles/Prusa/filament/Prusament PLA @CORE One.json
Normal file
102
resources/profiles/Prusa/filament/Prusament PLA @CORE One.json
Normal file
|
|
@ -0,0 +1,102 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"27.99"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PLA @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PLA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PLA @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PVB @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PVB @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PVB @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,28 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PVB @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"19"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament PVB @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PVB @CORE One 0.8",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
104
resources/profiles/Prusa/filament/Prusament PVB @CORE One.json
Normal file
104
resources/profiles/Prusa/filament/Prusament PVB @CORE One.json
Normal file
|
|
@ -0,0 +1,104 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"49.98"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.09"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament PVB @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PVB"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"75"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"75"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pvb",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament PVB @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.6 nozzle",
|
||||||
|
"Prusa CORE One HF 0.6 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament rPLA @CORE One 0.6",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"14"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament rPLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament rPLA @CORE One 0.6",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.8 nozzle",
|
||||||
|
"Prusa CORE One HF 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament rPLA @CORE One 0.8",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"14"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusament rPLA @CORE One",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament rPLA @CORE One 0.8",
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"17"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
104
resources/profiles/Prusa/filament/Prusament rPLA @CORE One.json
Normal file
104
resources/profiles/Prusa/filament/Prusament rPLA @CORE One.json
Normal file
|
|
@ -0,0 +1,104 @@
|
||||||
|
{
|
||||||
|
"chamber_temperature": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Prusa CORE One 0.25 nozzle",
|
||||||
|
"Prusa CORE One 0.3 nozzle",
|
||||||
|
"Prusa CORE One 0.4 nozzle",
|
||||||
|
"Prusa CORE One 0.5 nozzle",
|
||||||
|
"Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"Prusa CORE One HF 0.5 nozzle"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"37.49"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"filament_end_gcode": [
|
||||||
|
"; Filament-specific end gcode"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_id": "Prusament rPLA @CORE One",
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_notes": [
|
||||||
|
""
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PLA"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Prusa Polymers"
|
||||||
|
],
|
||||||
|
"filament_z_hop": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"filament_z_hop_types": [
|
||||||
|
"Slope Lift"
|
||||||
|
],
|
||||||
|
"from": "system",
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"idle_temperature": [
|
||||||
|
"150"
|
||||||
|
],
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusament rPLA @CORE One",
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"205"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"205"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"setting_id": "GFSA04",
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"type": "filament"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
{
|
||||||
|
"default_print_profile": "0.12mm STRUCTURAL @CORE One 0.25",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_max_jerk_x": [
|
||||||
|
"8",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_y": [
|
||||||
|
"8",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"max_layer_height": "0.15",
|
||||||
|
"min_layer_height": "0.05",
|
||||||
|
"name": "Prusa CORE One 0.25 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.25"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.25",
|
||||||
|
"retraction_length": "0.8",
|
||||||
|
"type": "machine",
|
||||||
|
"z_hop": "0.15"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
{
|
||||||
|
"default_print_profile": "0.16mm STRUCTURAL @CORE One 0.3",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_max_jerk_x": [
|
||||||
|
"8",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_y": [
|
||||||
|
"8",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"max_layer_height": "0.22",
|
||||||
|
"min_layer_height": "0.05",
|
||||||
|
"name": "Prusa CORE One 0.3 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.3"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.3",
|
||||||
|
"retraction_length": "0.7",
|
||||||
|
"type": "machine",
|
||||||
|
"z_hop": "0.15"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One",
|
||||||
|
"default_print_profile": "0.20mm SPEED @CORE One 0.4",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa CORE One 0.4 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.4",
|
||||||
|
"type": "machine"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One",
|
||||||
|
"default_print_profile": "0.20mm SPEED @CORE One 0.5",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.5 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa CORE One 0.5 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.5"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.5",
|
||||||
|
"type": "machine"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One 0.6",
|
||||||
|
"default_print_profile": "0.25mm SPEED @CORE One 0.6",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.6 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa CORE One 0.6 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.6",
|
||||||
|
"type": "machine"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One 0.8",
|
||||||
|
"default_print_profile": "0.40mm QUALITY @CORE One 0.8",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.8 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "Prusa CORE One 0.8 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One",
|
||||||
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES",
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"type": "machine"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,131 @@
|
||||||
|
{
|
||||||
|
"before_layer_change_gcode": [
|
||||||
|
";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n{if layer_z > 150}\nM201 X{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))} Y{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))}\n{endif}\n"
|
||||||
|
],
|
||||||
|
"change_filament_gcode": [
|
||||||
|
"M600\nG1 E0.3 F1500 ; prime after color change"
|
||||||
|
],
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One HF 0.4",
|
||||||
|
"default_print_profile": "0.20mm SPEED @CORE One 0.4",
|
||||||
|
"deretraction_speed": "25",
|
||||||
|
"emit_machine_limits_to_gcode": "1",
|
||||||
|
"extruder_clearance_height_to_lid": "50",
|
||||||
|
"extruder_clearance_height_to_rod": "33",
|
||||||
|
"extruder_clearance_radius": "75",
|
||||||
|
"from": "system",
|
||||||
|
"gcode_flavor": "marlin2",
|
||||||
|
"host_type": "prusalink",
|
||||||
|
"inherits": "fdm_machine_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"layer_change_gcode": [
|
||||||
|
";AFTER_LAYER_CHANGE\n;[layer_z]"
|
||||||
|
],
|
||||||
|
"machine_end_gcode": [
|
||||||
|
"{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; move print head up{endif}\nG1 E-1 F2400 ; additional retraction\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM141 S0 ; disable chamber control\nM107 ; turn off fan\nG1 X242 Y-9 F10200 ; park\nG4 ; wait\nM572 S0 ; reset PA\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_e": [
|
||||||
|
"5000",
|
||||||
|
"2500"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_extruding": [
|
||||||
|
"7000",
|
||||||
|
"2500"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_retracting": [
|
||||||
|
"2500",
|
||||||
|
"1200"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_travel": [
|
||||||
|
"7000",
|
||||||
|
"2500"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"10000",
|
||||||
|
"2500"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"10000",
|
||||||
|
"2500"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"400",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_e": [
|
||||||
|
"10",
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_x": [
|
||||||
|
"10",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_y": [
|
||||||
|
"10",
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_z": [
|
||||||
|
"2",
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"100",
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"350",
|
||||||
|
"160"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"350",
|
||||||
|
"160"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12",
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"machine_pause_gcode": "M601",
|
||||||
|
"machine_start_gcode": [
|
||||||
|
"; --- Printer Initialization and Checks ---\n\nM17 ; enable steppers\nM862.1 P[nozzle_diameter] A{(printer_notes=~/.*ABRASIVE_NOZZLE.*/ ? 1 : 0)} F{(printer_notes=~/.*HF_NOZZLE.*/ ? 1 : 0)} ; nozzle check\nM862.3 P \"COREONE\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.3.0+10073\n\n; --- Print Area and Coordinate System ---\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))} ; define print area\n\nG90 ; use absolute coordinates\nM83 ; extruder in relative mode\n\n; --- Preparation ---\n\n{if chamber_temperature[initial_tool] > 35} \n; we need to preheat the chamber\nM140 S115 ; set bed temp for chamber heating\n{else} \n; just set the selected bed temp otherwise\nM140 S[first_layer_bed_temperature] ; set bed temp\n{endif}\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all axes without mesh bed leveling\n\n\n; -- Chamber Temperature Control --\n{if chamber_temperature[initial_tool] > 35} ; if we need to heat the chamber\n; min chamber temp section\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif} ; set idle temp\nG1 Z10 F720 ; set bed position\nG1 X242 Y-9 F4800 ; set print head position\nM191 S{chamber_temperature[initial_tool]} ; wait for minimal chamber temp\nM141 S0 ; set nominal chamber temp\nM107\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n{else}\nM141 S{if chamber_temperature[initial_tool] == 0}20{else}{chamber_temperature[initial_tool]}{endif} ; set nominal chamber temp\n{endif}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S70{endif}\nG0 Z40 F10000\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif}\nM190 R[first_layer_bed_temperature] ; wait for bed temp\nM107\n\nG29 G ; absorb heat\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for MBL temp\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]==\"FLEX\"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\n; --- Mesh Bed Leveling (MBL) ---\n\nG29 P9 X208 Y-2.5 W32 H4 ; limited MBL\nM84 E ; turn off E motor\n\nG29 P1 ; invalidate MBL and probe print area\nG29 P1 X150 Y0 W100 H20 C ; probe near purge area\nG29 P3.2 ; MBL interpolation\nG29 P3.13 ; MBL extrapolation outside probe area\nG29 A ; activate MBL\n\n; --- Preparation for Purge Line ---\n\nM104 S{first_layer_temperature[initial_extruder]}\nG0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[initial_extruder]}\n\nG92 E0 ; reset extruder position\nM569 S0 E ; set spreadcycle mode for extruder\n\n; --- Extrude Purge Line ---\n\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one\nG0 E5 X235 Z0.2 F500 ; purge\nG0 X225 E4 F500 ; purge\nG0 X215 E4 F650 ; purge\nG0 X205 E4 F800 ; purge\nG0 X202 Z0.05 F8000 ; wipe, close to bed\nG0 X199 Z0.2 F8000 ; wipe, quickly away from bed\n\nG92 E0 ; reset extruder position\nM221 S100 ; set flow to 100%"
|
||||||
|
],
|
||||||
|
"max_layer_height": "0.30",
|
||||||
|
"min_layer_height": "0.07",
|
||||||
|
"name": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"250x0",
|
||||||
|
"250x220",
|
||||||
|
"0x220"
|
||||||
|
],
|
||||||
|
"printable_height": "270",
|
||||||
|
"printer_model": "Prusa CORE One HF",
|
||||||
|
"printer_notes": [
|
||||||
|
"Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nHF_NOZZLE\nPG\nNO_TEMPLATES"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.4",
|
||||||
|
"retract_before_wipe": "80",
|
||||||
|
"retract_length_toolchange": "0",
|
||||||
|
"retract_lift_above": "0",
|
||||||
|
"retract_lift_below": "269",
|
||||||
|
"retract_when_changing_layer": "1",
|
||||||
|
"retraction_length": "0.7",
|
||||||
|
"retraction_minimum_travel": "1.5",
|
||||||
|
"retraction_speed": "45",
|
||||||
|
"single_extruder_multi_material": "0",
|
||||||
|
"thumbnails": [
|
||||||
|
"16x16/QOI",
|
||||||
|
"313x173/QOI",
|
||||||
|
"440x240/QOI",
|
||||||
|
"480x240/QOI",
|
||||||
|
"640x480/PNG"
|
||||||
|
],
|
||||||
|
"travel_slope": "1",
|
||||||
|
"type": "machine",
|
||||||
|
"use_firmware_retraction": "0",
|
||||||
|
"use_relative_e_distances": "1",
|
||||||
|
"wipe": "0",
|
||||||
|
"z_hop": "0.2",
|
||||||
|
"z_hop_types": "Slope Lift"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One HF 0.5",
|
||||||
|
"default_print_profile": "0.20mm SPEED @CORE One HF 0.5",
|
||||||
|
"deretraction_speed": "25",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"max_layer_height": "0.32",
|
||||||
|
"min_layer_height": "0.07",
|
||||||
|
"name": "Prusa CORE One HF 0.5 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.5"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One HF",
|
||||||
|
"printer_variant": "0.5",
|
||||||
|
"retraction_length": "0.7",
|
||||||
|
"type": "machine",
|
||||||
|
"wipe": "1"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One HF 0.6",
|
||||||
|
"default_print_profile": "0.32mm SPEED @CORE One HF 0.6",
|
||||||
|
"deretraction_speed": "25",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"max_layer_height": "0.40",
|
||||||
|
"min_layer_height": "0.15",
|
||||||
|
"name": "Prusa CORE One HF 0.6 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One HF",
|
||||||
|
"printer_variant": "0.6",
|
||||||
|
"retraction_length": "0.7",
|
||||||
|
"type": "machine",
|
||||||
|
"wipe": "1"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
{
|
||||||
|
"default_filament_profile": "Prusament PLA @CORE One HF 0.8",
|
||||||
|
"default_print_profile": "0.40mm STRUCTURAL @CORE One HF 0.8",
|
||||||
|
"deretraction_speed": "15",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "Prusa CORE One HF 0.4 nozzle",
|
||||||
|
"instantiation": "true",
|
||||||
|
"max_layer_height": "0.6",
|
||||||
|
"min_layer_height": "0.2",
|
||||||
|
"name": "Prusa CORE One HF 0.8 nozzle",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_model": "Prusa CORE One HF",
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"retract_before_wipe": "50",
|
||||||
|
"retraction_length": "0.6",
|
||||||
|
"retraction_speed": "15",
|
||||||
|
"type": "machine",
|
||||||
|
"wipe": "1",
|
||||||
|
"z_hop": "0.25"
|
||||||
|
}
|
||||||
12
resources/profiles/Prusa/machine/Prusa CORE One HF.json
Normal file
12
resources/profiles/Prusa/machine/Prusa CORE One HF.json
Normal file
|
|
@ -0,0 +1,12 @@
|
||||||
|
{
|
||||||
|
"bed_model": "coreone_bed.stl",
|
||||||
|
"bed_texture": "coreone.svg",
|
||||||
|
"default_materials": "Prusa Generic ABS @CORE One;Prusa Generic ASA @CORE One;Prusa Generic PETG @CORE One;Prusa Generic PLA @CORE One;Prusa Generic PLA Silk @CORE One;Prusa Generic TPU @CORE One",
|
||||||
|
"family": "Prusa",
|
||||||
|
"hotend_model": "",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "Prusa_CORE_One_HF",
|
||||||
|
"name": "Prusa CORE One HF",
|
||||||
|
"nozzle_diameter": "0.4;0.5;0.6;0.8",
|
||||||
|
"type": "machine_model"
|
||||||
|
}
|
||||||
12
resources/profiles/Prusa/machine/Prusa CORE One.json
Normal file
12
resources/profiles/Prusa/machine/Prusa CORE One.json
Normal file
|
|
@ -0,0 +1,12 @@
|
||||||
|
{
|
||||||
|
"bed_model": "coreone_bed.stl",
|
||||||
|
"bed_texture": "coreone.svg",
|
||||||
|
"default_materials": "Prusa Generic ABS @CORE One;Prusa Generic ASA @CORE One;Prusa Generic PETG @CORE One;Prusa Generic PLA @CORE One;Prusa Generic PLA Silk @CORE One;Prusa Generic TPU @CORE One",
|
||||||
|
"family": "Prusa",
|
||||||
|
"hotend_model": "",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "Prusa_CORE_One",
|
||||||
|
"name": "Prusa CORE One",
|
||||||
|
"nozzle_diameter": "0.25;0.3;0.4;0.5;0.6;0.8",
|
||||||
|
"type": "machine_model"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.05mm DETAIL @MK4S 0.25",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.05mm DETAIL @CORE One 0.25",
|
||||||
|
"type": "process",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "4000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "45",
|
||||||
|
"initial_layer_speed": "25",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.07mm DETAIL @MK4S 0.25",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.07mm DETAIL @CORE One 0.25",
|
||||||
|
"type": "process",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "4000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "45",
|
||||||
|
"initial_layer_speed": "25",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.10mm FAST DETAIL @MK4S 0.4",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.10mm FAST DETAIL @CORE One 0.4",
|
||||||
|
"type": "process",
|
||||||
|
"inner_wall_acceleration": "3000",
|
||||||
|
"sparse_infill_acceleration": "6000",
|
||||||
|
"internal_solid_infill_acceleration": "4000",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "7000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "100",
|
||||||
|
"initial_layer_speed": "45",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.10mm STRUCTURAL @MK4S 0.5",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.10mm STRUCTURAL @CORE One 0.5",
|
||||||
|
"type": "process",
|
||||||
|
"inner_wall_speed": "80",
|
||||||
|
"small_perimeter_speed": "45",
|
||||||
|
"outer_wall_speed": "45",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "7000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "100",
|
||||||
|
"initial_layer_speed": "45",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.5"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.12mm SPEED @MK4S 0.25",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.12mm SPEED @CORE One 0.25",
|
||||||
|
"type": "process",
|
||||||
|
"travel_acceleration": "4000",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "45",
|
||||||
|
"initial_layer_speed": "25",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.12mm STRUCTURAL @MK4S 0.25",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.12mm STRUCTURAL @CORE One 0.25",
|
||||||
|
"type": "process",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "4000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "45",
|
||||||
|
"initial_layer_speed": "25",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,16 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.12mm STRUCTURAL @MK4S 0.3",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.12mm STRUCTURAL @CORE One 0.3",
|
||||||
|
"type": "process",
|
||||||
|
"sparse_infill_acceleration": "5000",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "7000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "60",
|
||||||
|
"initial_layer_speed": "45",
|
||||||
|
"top_surface_acceleration": "1500",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.15mm SPEED @MK4S 0.25",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.15mm SPEED @CORE One 0.25",
|
||||||
|
"type": "process",
|
||||||
|
"travel_acceleration": "4000",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "45",
|
||||||
|
"initial_layer_speed": "25",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,20 @@
|
||||||
|
{
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "0.15mm SPEED @MK4S 0.4",
|
||||||
|
"instantiation": "true",
|
||||||
|
"name": "0.15mm SPEED @CORE One 0.4",
|
||||||
|
"type": "process",
|
||||||
|
"overhang_2_4_speed": "50",
|
||||||
|
"travel_speed": "350",
|
||||||
|
"travel_acceleration": "7000",
|
||||||
|
"default_acceleration": "3000",
|
||||||
|
"support_interface_top_layers": "3",
|
||||||
|
"initial_layer_infill_speed": "100",
|
||||||
|
"initial_layer_speed": "45",
|
||||||
|
"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*HF_NOZZLE.*/",
|
||||||
|
"sparse_infill_acceleration": "7000",
|
||||||
|
"internal_solid_infill_acceleration": "6000",
|
||||||
|
"inner_wall_acceleration": "6000",
|
||||||
|
"outer_wall_acceleration": "3000",
|
||||||
|
"top_surface_acceleration": "2000"
|
||||||
|
}
|
||||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue