Merge some features from BS1.9 beta4 (#5181)

* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia

github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder

Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59

* FIX: auto-arranging incorrect with rotation enabled

auto-arranging incorrect with rotation enabled and the objects already have been rotated.

jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)

* ENH: update X1C & X1E start gcode

1.Fix fan problem

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610

* ENH: update A series gcode

1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d

* FIX: fix some cali problem of P series

jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f

* FIX: fix can't enter ',' in multiplicator

github: #3805

Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea

* calib wizard

* NEW: FlipLines infill

jira:6701

New infill pattern that combine block lines infill and switching layers for smooth transition.

Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)

* ENH: add nozzle blob detection and air printing detection

jira: new

Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302

* FIX: Top surface bridging fail on 3DHC & FL infill

Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill

jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)

* FIX: the error display when reset virtual slot

jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5

* FIX: Error "Voronoi cell doesn't contain a sourcepoint"

github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf

* fix build error

* FIX: CLI: fix the crash issue caused by get_min_flush_volumes

JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2

* FIX: can't use support filament in gcode.3mf

1. Add total_filament_volumes, directly access it to get used filaments

github:#3865

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717

* ENH: p series support long retraction

1. P series support long retraction in filament
2. Add long retraction params in common.json

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18

* ENH::modify some logs level

jira:[for log]

Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117

* NEW: support multi device

JIRA: STUDIO-6072

Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH: update A1 series  gcode

1.Update filament change gcode and machine start gcode for
  A1 and A1 mini

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e

* FIX: always have 0th filament in ams mapping

1. Only set the filament id in map when flush length is not 0

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67

* ENH: add filament id in slice info

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa

* ENH: refine ui for multi machine

JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel

Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce

* FIX: fix Issues with sending multiple devices

JIRA: STUDIO-6876

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918

* NEW: support hms error code

Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4

* FIX:fixed some multi job issue

Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46

* NEW:support pin code binding

Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13

* ENH:add printable check for devices

Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)

* FIX: add more fonts

jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)

* ENH: load more fonts

this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz>, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)

* ENH: add ProfileDescription for translate

1.Add ProfileDescription.hpp simply for translating

jira:NEW

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f

* ENH: Improve CrossHatch transation layers

jira: 6701

Change name from Flippingline to CrossHatch.

Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.

Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51

* UP

* ENH: modify the default config for multi-device

JIRA: STUDIO-6072

Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH: add long retraction for P series

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213

* FIX: all plates stats data missing issue

jira: new

Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f

* ENH:update pre print options

jira:[for multi]

Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81

* FIX:fixed can't popup pinbind win on macos

jira:[STUDIO-6895]

Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21

* FIX:fixed the task of padding cannot be cancelled

Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9

* ENH:Play video after redirecting to device page

jira:[STUDIO-6884]

Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54

* FIX: fix ui bug in send multi machine page for mac

JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing

Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922

* FIX: Fix some bugs in maintaining the selected status of local tasks

JIRA: STUDIO-6824

Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5

* ENH: local task sort by send time by default

JIRA: STUDIO-6885

Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc

* FIX: Clicking to continue printing does not take effect in error code

JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect

Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9

* ENH: use designTitle when designId > 0

JIRA: STUDIO-6072

Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com>

* NEW:import vertex and mtl color from obj file

Jira: STUDIO-6805

Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f

* FIX:change the strategy of merge_ka_kd

Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805

Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)

* FIX:use default_strategy after modifed cluster number

jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac

* FIX: the bug of incorrect button without restarting

JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears

Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e

* FIX: wrong default value for long retraction

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32

* FIX: error code pop-up window without retry button in some code

JIRA: STUDIO-6922

Change-Id: I67464bebaba4558618301592c455db8824bbfe30

* FIX: air printing and nozzle blob detection issue

jira: STUDIO-6897

Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799

* FIX:fix bugs of algo and read quad in obj file

Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61

* dd

* ENH:Set the default nozzle diameter to 0.4

jira:[for nozzle]

Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052

* FIX:fixed backspace error on macos

Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c

* ENH:Subscription list deduplication

jira:[for mulit]

Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e

* ENH:update wiki url for Pin Code

jira:[pin code]

Change-Id: I95faaa396a839b5b159119ef235b650c76706a84

* NEW:add OpenCV.cmake in deps

jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41

* FIX:cancel obj import restrictions

jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c

* NEW:add multiple printer restrictions

jira:[for multiple]

Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a

* ENH:Added two entrances for adding devices

jira:[multi device]

Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74

* slic3r: Fix wxFont being undefined

[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
   51 | bool can_load(const wxFont &font);
      |                     ^~~~~~

* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration

[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
  127 |         BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
      |                           ^~~~~
      |                           perror

[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
   40 |         BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
      |         ^~~~~~~~~~~~~~~~~

* fix OpenCV

* wip - build break

* fix build error wip

* ENH: support preset description(tooltip)

Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754

* fix more build errors

* Revert "ENH: load more fonts"

This reverts commit 32b6fd199a.

* change colors

* misc fixes

* restore export gcode btn

---------

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-16 16:45+0200\n"
+"POT-Creation-Date: 2024-04-28 18:11+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -2380,11 +2380,11 @@ msgstr "Automatické Doplnění"
 msgid "AMS not connected"
 msgstr "AMS není připojen"
 
-msgid "Load Filament"
-msgstr "Zavézt Filament"
+msgid "Load"
+msgstr ""
 
-msgid "Unload Filament"
-msgstr "Vysunout Filament"
+msgid "Unload"
+msgstr "Vysunout"
 
 msgid "Ext Spool"
 msgstr "Ext Cívka"
@@ -2401,7 +2401,7 @@ msgstr "Zkusit znovu"
 msgid "Calibrating AMS..."
 msgstr "Kalibruji AMS..."
 
-msgid "A problem occured during calibration. Click to view the solution."
+msgid "A problem occurred during calibration. Click to view the solution."
 msgstr "Během kalibrace došlo k problému. Kliknutím zobrazíte řešení."
 
 msgid "Calibrate again"
@@ -2442,10 +2442,8 @@ msgstr "Vezměte nový filament"
 
 msgid ""
 "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
-"load or unload filiament."
+"load or unload filaments."
 msgstr ""
-"Vyberte slot AMS a poté stiskněte \" Načíst \" nebo \" Uvolnit \" pro "
-"automatické načtení nebo vyjměte vlákno."
 
 msgid "Edit"
 msgstr "Upravit"
@@ -3057,6 +3055,14 @@ msgstr ""
 "AMS bude pokračovat na další cívku se stejnými vlastnostmi filamentu "
 "automaticky, když dojde aktuální filament"
 
+msgid "Air Printing Detection"
+msgstr ""
+
+msgid ""
+"Detects clogging and filament grinding, halting printing immediately to "
+"conserve time and filament."
+msgstr ""
+
 msgid "File"
 msgstr "Soubor"
 
@@ -3509,18 +3515,6 @@ msgstr ""
 msgid "Nozzle clog pause"
 msgstr ""
 
-msgid "MC"
-msgstr "MC"
-
-msgid "MainBoard"
-msgstr "Základní deska"
-
-msgid "TH"
-msgstr "TH"
-
-msgid "XCam"
-msgstr "XCam"
-
 msgid "Unknown"
 msgstr "Neznámý"
 
@@ -4055,7 +4049,7 @@ msgstr "Objem:"
 msgid "Size:"
 msgstr "Velikost:"
 
-#, boost-format
+#, c-format, boost-format
 msgid ""
 "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -4196,6 +4190,9 @@ msgstr "Náhled"
 msgid "Device"
 msgstr "Zařízení"
 
+msgid "Multi-device"
+msgstr ""
+
 msgid "Project"
 msgstr "Projekt"
 
@@ -4235,6 +4232,9 @@ msgstr "Vytisknout vše"
 msgid "Send all"
 msgstr "Odeslat vše"
 
+msgid "Send to Multi-device"
+msgstr ""
+
 msgid "Keyboard Shortcuts"
 msgstr "Klávesové zkratky"
 
@@ -5025,9 +5025,6 @@ msgstr "Komora"
 msgid "Bed"
 msgstr "Podložka"
 
-msgid "Unload"
-msgstr "Vysunout"
-
 msgid "Debug Info"
 msgstr "Informace o ladění"
 
@@ -5211,9 +5208,6 @@ msgstr "Stav"
 msgid "Update"
 msgstr "Aktualizovat"
 
-msgid "HMS"
-msgstr "HMS"
-
 msgid "Don't show again"
 msgstr "Znovu Nezobrazovat"
 
@@ -5461,6 +5455,12 @@ msgstr "Povolit zvuky upozornění"
 msgid "Filament Tangle Detect"
 msgstr ""
 
+msgid "Nozzle Clumping Detection"
+msgstr ""
+
+msgid "Check if the nozzle is clumping by filament or other foreign objects."
+msgstr ""
+
 msgid "Nozzle Type"
 msgstr ""
 
@@ -5912,18 +5912,23 @@ msgstr "Import modelu"
 msgid "prepare 3mf file..."
 msgstr "připravte soubor 3mf..."
 
+msgid "Download failed, unknown file format."
+msgstr ""
+
 msgid "downloading project ..."
 msgstr "stahuji projekt ..."
 
+msgid "Download failed, File size exception."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Project downloaded %d%%"
 msgstr "Projekt stažen %d%%"
 
 msgid ""
-"Importing to Orca Slicer failed. Please download the file and manually "
+"Importing to Bambu Studio failed. Please download the file and manually "
 "import it."
 msgstr ""
-"Import do Orca Sliceru selhal. Stáhněte soubor a proveďte jeho ruční import."
 
 msgid "Import SLA archive"
 msgstr ""
@@ -6189,6 +6194,21 @@ msgstr "Imperiální"
 msgid "Units"
 msgstr "Jednotky"
 
+msgid "Allow only one OrcaSlicer instance"
+msgstr ""
+
+msgid ""
+"On OSX there is always only one instance of app running by default. However "
+"it is allowed to run multiple instances of same app from the command line. "
+"In such case this settings will allow only one instance."
+msgstr ""
+
+msgid ""
+"If this is enabled, when starting OrcaSlicer and another instance of the "
+"same OrcaSlicer is already running, that instance will be reactivated "
+"instead."
+msgstr ""
+
 msgid "Home"
 msgstr ""
 
@@ -6265,6 +6285,14 @@ msgid ""
 "each printer automatically."
 msgstr ""
 
+msgid "Multi-device Management(Take effect after restarting Studio)."
+msgstr ""
+
+msgid ""
+"With this option enabled, you can send a task to multiple devices at the "
+"same time and manage multiple devices."
+msgstr ""
+
 msgid "Network"
 msgstr ""
 
@@ -6901,6 +6929,9 @@ msgstr "Automatická kalibrace průtoku pomocí Mikro Lidar"
 msgid "Modifying the device name"
 msgstr "Úprava názvu zařízení"
 
+msgid "Bind with Pin Code"
+msgstr ""
+
 msgid "Send to Printer SD card"
 msgstr "Odeslat do tiskárny SD kartu"
 
@@ -6953,6 +6984,26 @@ msgstr "Časový limit pro obdržení hlášení o přihlášení vypršel"
 msgid "Unknown Failure"
 msgstr "Neznámá chyba"
 
+msgid ""
+"Please Find the Pin Code in Account page on printer screen,\n"
+" and type in the Pin Code below."
+msgstr ""
+
+msgid "Can't find Pin Code?"
+msgstr ""
+
+msgid "Pin Code"
+msgstr ""
+
+msgid "Binding..."
+msgstr ""
+
+msgid "Please confirm on the printer screen"
+msgstr ""
+
+msgid "Log in failed. Please check the Pin Code."
+msgstr ""
+
 msgid "Log in printer"
 msgstr "Přihlaste se k tiskárně"
 
@@ -7156,8 +7207,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat  "
 "\"Timelapse Wipe Tower\" \n"
@@ -8176,6 +8227,39 @@ msgstr "Hotovo"
 msgid "resume"
 msgstr ""
 
+msgid "Resume Printing"
+msgstr ""
+
+msgid "Resume Printing(defects acceptable)"
+msgstr ""
+
+msgid "Resume Printing(problem solved)"
+msgstr ""
+
+msgid "Stop Printing"
+msgstr ""
+
+msgid "Check Assistant"
+msgstr ""
+
+msgid "Filament Extruded, Continue"
+msgstr ""
+
+msgid "Not Extruded Yet, Retry"
+msgstr ""
+
+msgid "Finished, Continue"
+msgstr ""
+
+msgid "Load Filament"
+msgstr "Zavézt Filament"
+
+msgid "Filament Loaded, Resume"
+msgstr ""
+
+msgid "View Liveview"
+msgstr ""
+
 msgid "Confirm and Update Nozzle"
 msgstr ""
 
@@ -10259,6 +10343,9 @@ msgstr "Kubický podepíraný"
 msgid "Lightning"
 msgstr "Blesky"
 
+msgid "Cross Hatch"
+msgstr ""
+
 msgid "Sparse infill anchor length"
 msgstr "Délka kotvy vnitřní výplně"
 
@@ -10454,10 +10541,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě "
 "\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". "
@@ -13237,6 +13324,9 @@ msgstr "Zrušeno"
 msgid "load_obj: failed to parse"
 msgstr "load_obj: nepodařilo se zpracovat"
 
+msgid "load mtl in obj: failed to parse"
+msgstr ""
+
 msgid "The file contains polygons with more than 4 vertices."
 msgstr "Soubor obsahuje polygon s více než 4 vrcholy."
 
@@ -13362,6 +13452,14 @@ msgstr "Vyberte prosím filament pro kalibraci."
 msgid "The input value size must be 3."
 msgstr "Velikost vstupní hodnoty musí být 3."
 
+msgid ""
+"This machine type can only hold 16 history results per nozzle. You can "
+"delete the existing historical results and then start calibration. Or you "
+"can continue the calibration, but you cannot create new calibration "
+"historical results. \n"
+"Do you still want to continue the calibration?"
+msgstr ""
+
 msgid "Connecting to printer..."
 msgstr "Připojování k tiskárně..."
 
@@ -13371,6 +13469,19 @@ msgstr "Výsledek neúspěšného testu byl zahozen."
 msgid "Flow Dynamics Calibration result has been saved to the printer"
 msgstr "Výsledek kalibrace dynamiky průtoku byl uložen do tiskárny"
 
+#, c-format, boost-format
+msgid ""
+"There is already a historical calibration result with the same name: %s. "
+"Only one of the results with the same name is saved. Are you sure you want "
+"to override the historical result?"
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"This machine type can only hold %d history results per nozzle. This result "
+"will not be saved."
+msgstr ""
+
 msgid "Internal Error"
 msgstr "Interní chyba"
 
@@ -13667,9 +13778,6 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr "Parametry tisku"
 
-msgid "- ℃"
-msgstr "- ℃"
-
 msgid "Plate Type"
 msgstr "Typ Podložky"
 
@@ -13717,12 +13825,6 @@ msgstr "Do hodnoty k"
 msgid "Step value"
 msgstr "Krok hodnoty"
 
-msgid "0.5"
-msgstr "0.5"
-
-msgid "0.005"
-msgstr "0.005"
-
 msgid "The nozzle diameter has been synchronized from the printer Settings"
 msgstr "Průměr trysky byl synchronizován z Nastavení tiskárny"
 
@@ -13750,10 +13852,14 @@ msgstr "Aktualizace historických záznamů kalibrace dynamiky průtoku probíh
 msgid "Action"
 msgstr "Akce"
 
+#, c-format, boost-format
+msgid "This machine type can only hold %d history results per nozzle."
+msgstr ""
+
 msgid "Edit Flow Dynamics Calibration"
 msgstr "Upravit kalibraci dynamiky průtoku"
 
-msgid "New Flow Dynamics Calibration"
+msgid "New Flow Dynamic Calibration"
 msgstr ""
 
 msgid "Ok"
@@ -13762,13 +13868,6 @@ msgstr ""
 msgid "The filament must be selected."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"There is already a historical calibration result with the same name: %s. "
-"Only one of the results with the same name is saved. Are you sure you want "
-"to override the historical result?"
-msgstr ""
-
 msgid "Network lookup"
 msgstr "Vyhledávání v síti"
 
@@ -14167,8 +14266,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 
@@ -14722,6 +14821,175 @@ msgid ""
 "Error: \"%2%\""
 msgstr ""
 
+msgid ""
+"It has a small layer height, and results in almost negligible layer lines "
+"and high printing quality. It is suitable for most general printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds "
+"and acceleration, and the sparse infill pattern is Gyroid. So, it results in "
+"much higher printing quality, but a much longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has a slightly "
+"bigger layer height, and results in almost negligible layer lines, and "
+"slightly shorter printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer "
+"height, and results in slightly visible layer lines, but shorter printing "
+"time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
+"height, and results in almost invisible layer lines and higher printing "
+"quality, but shorter printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
+"lines, lower speeds and acceleration, and the sparse infill pattern is "
+"Gyroid. So, it results in almost invisible layer lines and much higher "
+"printing quality, but much longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer "
+"height, and results in minimal layer lines and higher printing quality, but "
+"shorter printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
+"lines, lower speeds and acceleration, and the sparse infill pattern is "
+"Gyroid. So, it results in minimal layer lines and much higher printing "
+"quality, but much longer printing time."
+msgstr ""
+
+msgid ""
+"It has a general layer height, and results in general layer lines and "
+"printing quality. It is suitable for most general printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops "
+"and a higher sparse infill density. So, it results in higher strength of the "
+"prints, but more filament consumption and longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
+"height, and results in more apparent layer lines and lower printing quality, "
+"but slightly shorter printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
+"height, and results in more apparent layer lines and lower printing quality, "
+"but shorter printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
+"height, and results in less apparent layer lines and higher printing "
+"quality, but longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
+"height, lower speeds and acceleration, and the sparse infill pattern is "
+"Gyroid. So, it results in less apparent layer lines and much higher printing "
+"quality, but much longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
+"height, and results in almost negligible layer lines and higher printing "
+"quality, but longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
+"height, lower speeds and acceleration, and the sparse infill pattern is "
+"Gyroid. So, it results in almost negligible layer lines and much higher "
+"printing quality, but much longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
+"height, and results in almost negligible layer lines and longer printing "
+"time."
+msgstr ""
+
+msgid ""
+"It has a big layer height, and results in apparent layer lines and ordinary "
+"printing quality and printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops "
+"and a higher sparse infill density. So, it results in higher strength of the "
+"prints, but more filament consumption and longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
+"height, and results in more apparent layer lines and lower printing quality, "
+"but shorter printing time in some printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
+"height, and results in much more apparent layer lines and much lower "
+"printing quality, but shorter printing time in some printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
+"height, and results in less apparent layer lines and slight higher printing "
+"quality, but longer printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
+"height, and results in less apparent layer lines and higher printing "
+"quality, but longer printing time."
+msgstr ""
+
+msgid ""
+"It has a very big layer height, and results in very apparent layer lines, "
+"low printing quality and general printing time."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer "
+"height, and results in very apparent layer lines and much lower printing "
+"quality, but shorter printing time in some printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger "
+"layer height, and results in extremely apparent layer lines and much lower "
+"printing quality, but much shorter printing time in some printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.8 mm nozzle, it has a slightly "
+"smaller layer height, and results in slightly less but still apparent layer "
+"lines and slightly higher printing quality, but longer printing time in some "
+"printing cases."
+msgstr ""
+
+msgid ""
+"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer "
+"height, and results in less but still apparent layer lines and slightly "
+"higher printing quality, but longer printing time in some printing cases."
+msgstr ""
+
 msgid "Connected to Obico successfully!"
 msgstr ""
 
@@ -14883,8 +15151,8 @@ msgid ""
 msgstr ""
 "Plochou na podložku\n"
 "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
-"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
-"podložku\" nebo stiskněte klávesu <b>F</b>."
+"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
+"\" nebo stiskněte klávesu <b>F</b>."
 
 #: resources/data/hints.ini: [hint:Object List]
 msgid ""
@@ -15100,6 +15368,47 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#~ msgid "Unload Filament"
+#~ msgstr "Vysunout Filament"
+
+#~ msgid ""
+#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to "
+#~ "automatically load or unload filiament."
+#~ msgstr ""
+#~ "Vyberte slot AMS a poté stiskněte \" Načíst \" nebo \" Uvolnit \" pro "
+#~ "automatické načtení nebo vyjměte vlákno."
+
+#~ msgid "MC"
+#~ msgstr "MC"
+
+#~ msgid "MainBoard"
+#~ msgstr "Základní deska"
+
+#~ msgid "TH"
+#~ msgstr "TH"
+
+#~ msgid "XCam"
+#~ msgstr "XCam"
+
+#~ msgid "HMS"
+#~ msgstr "HMS"
+
+#~ msgid ""
+#~ "Importing to Orca Slicer failed. Please download the file and manually "
+#~ "import it."
+#~ msgstr ""
+#~ "Import do Orca Sliceru selhal. Stáhněte soubor a proveďte jeho ruční "
+#~ "import."
+
+#~ msgid "- ℃"
+#~ msgstr "- ℃"
+
+#~ msgid "0.5"
+#~ msgstr "0.5"
+
+#~ msgid "0.005"
+#~ msgstr "0.005"
+
 #~ msgid "active"
 #~ msgstr "aktivní"