3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2026-01-04 05:50:37 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 5

Add Kingroon Filament

Browse source
This commit is contained in:
liberodark 2025-09-12 23:33:26 +02:00
parent 3c0c36d11c
commit 1cb19f759c
10 changed files with 2099 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

292
resources/profiles/BBL/filament/Kingroon/KINGROON ABS Basic.json Normal file
View file

@ -0,0 +1,292 @@
{
"type": "filament",
"name": "KINGROON ABS Basic",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic ABS @System",
"filament_type": [
"ABS"
],
"activate_air_filtration": [
"1"
],
"additional_cooling_fan_speed": [
"0"
],
"chamber_temperatures": [
"0"
],
"circle_compensation_speed": [
"200"
],
"close_fan_the_first_x_layers": [
"3"
],
"compatible_printers": [
"Bambu Lab P1S 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"0"
],
"cool_plate_temp_initial_layer": [
"0"
],
"counter_coef_1": [
"0"
],
"counter_coef_2": [
"0.008"
],
"counter_coef_3": [
"-0.041"
],
"counter_limit_max": [
"0.033"
],
"counter_limit_min": [
"-0.035"
],
"default_filament_colour": [
""
],
"diameter_limit": [
"50"
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"90"
],
"eng_plate_temp_initial_layer": [
"90"
],
"fan_cooling_layer_time": [
"30"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"10"
],
"filament_adhesiveness_category": [
"200"
],
"filament_change_length": [
"10"
],
"filament_cost": [
"20"
],
"filament_density": [
"1.04"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n\n"
],
"filament_extruder_variant": [
"Direct Drive Standard"
],
"filament_flow_ratio": [
"0.95"
],
"filament_flush_temp": [
"0"
],
"filament_flush_volumetric_speed": [
"0"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"nil"
],
"filament_max_volumetric_speed": [
"15"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_pre_cooling_temperature": [
"0"
],
"filament_prime_volume": [
"45"
],
"filament_printable": [
"3"
],
"filament_ramming_travel_time": [
"0"
],
"filament_ramming_volumetric_speed": [
"-1"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON ABS Basic @Bambu Lab P1S 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hole_coef_1": [
"0"
],
"hole_coef_2": [
"-0.008"
],
"hole_coef_3": [
"0.23415"
],
"hole_limit_max": [
"0.22"
],
"hole_limit_min": [
"0.088"
],
"hot_plate_temp": [
"90"
],
"hot_plate_temp_initial_layer": [
"90"
],
"impact_strength_z": [
"10"
],
"long_retractions_when_ec": [
"0"
],
"nozzle_temperature": [
"270"
],
"nozzle_temperature_initial_layer": [
"260"
],
"nozzle_temperature_range_high": [
"280"
],
"nozzle_temperature_range_low": [
"240"
],
"overhang_fan_speed": [
"80"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pre_start_fan_time": [
"0"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"retraction_distances_when_ec": [
"0"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"3"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"0"
],
"supertack_plate_temp_initial_layer": [
"0"
],
"temperature_vitrification": [
"100"
],
"textured_plate_temp": [
"90"
],
"textured_plate_temp_initial_layer": [
"90"
],
"version": "2.1.0.19"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PETG Basic.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PETG Basic",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PETG @System",
"filament_type": [
"PETG"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"0"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"3"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"0"
],
"cool_plate_temp_initial_layer": [
"0"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"70"
],
"eng_plate_temp_initial_layer": [
"70"
],
"fan_cooling_layer_time": [
"30"
],
"fan_max_speed": [
"40"
],
"fan_min_speed": [
"10"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.25"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.94"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"nil"
],
"filament_max_volumetric_speed": [
"9"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PETG Basic @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"255"
],
"nozzle_temperature_initial_layer": [
"255"
],
"nozzle_temperature_range_high": [
"270"
],
"nozzle_temperature_range_low": [
"230"
],
"overhang_fan_speed": [
"90"
],
"overhang_fan_threshold": [
"10%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"12"
],
"slow_down_min_speed": [
"10"
],
"supertack_plate_temp": [
"70"
],
"supertack_plate_temp_initial_layer": [
"70"
],
"temperature_vitrification": [
"70"
],
"textured_plate_temp": [
"70"
],
"textured_plate_temp_initial_layer": [
"70"
],
"version": "1.10.0.27"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PETG-CF Basic.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PETG-CF Basic",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PETG @System",
"filament_type": [
"PETG-CF"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"0"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"3"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"0"
],
"cool_plate_temp_initial_layer": [
"0"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"70"
],
"eng_plate_temp_initial_layer": [
"70"
],
"fan_cooling_layer_time": [
"30"
],
"fan_max_speed": [
"40"
],
"fan_min_speed": [
"5"
],
"filament_cost": [
"34.99"
],
"filament_density": [
"1.25"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.95"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"nil"
],
"filament_max_volumetric_speed": [
"8"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PETG-CF Basic @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"255"
],
"nozzle_temperature_initial_layer": [
"255"
],
"nozzle_temperature_range_high": [
"270"
],
"nozzle_temperature_range_low": [
"240"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"10%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"40"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"10"
],
"supertack_plate_temp": [
"70"
],
"supertack_plate_temp_initial_layer": [
"70"
],
"temperature_vitrification": [
"70"
],
"textured_plate_temp": [
"70"
],
"textured_plate_temp_initial_layer": [
"70"
],
"version": "1.10.0.32"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PLA + Basic.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PLA + Basic",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PLA @System",
"filament_type": [
"PLA"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"35"
],
"cool_plate_temp_initial_layer": [
"35"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"0"
],
"eng_plate_temp_initial_layer": [
"0"
],
"fan_cooling_layer_time": [
"80"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.26"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"1"
],
"filament_max_volumetric_speed": [
"21"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"18"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PLA + Basic @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"230"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"45"
],
"supertack_plate_temp_initial_layer": [
"45"
],
"temperature_vitrification": [
"45"
],
"textured_plate_temp": [
"65"
],
"textured_plate_temp_initial_layer": [
"65"
],
"version": "1.10.0.27"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PLA Basic.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PLA Basic",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PLA @System",
"filament_type": [
"PLA"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"35"
],
"cool_plate_temp_initial_layer": [
"35"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"0"
],
"eng_plate_temp_initial_layer": [
"0"
],
"fan_cooling_layer_time": [
"80"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.26"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"1"
],
"filament_max_volumetric_speed": [
"21"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"18"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PLA Basic @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"230"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"45"
],
"supertack_plate_temp_initial_layer": [
"45"
],
"temperature_vitrification": [
"45"
],
"textured_plate_temp": [
"65"
],
"textured_plate_temp_initial_layer": [
"65"
],
"version": "1.10.0.27"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PLA Matte.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PLA Matte",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PLA @System",
"filament_type": [
"PLA"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"35"
],
"cool_plate_temp_initial_layer": [
"35"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"0"
],
"eng_plate_temp_initial_layer": [
"0"
],
"fan_cooling_layer_time": [
"80"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.32"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"1"
],
"filament_max_volumetric_speed": [
"22"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"18"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"5%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PLA Matte @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"240"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"45"
],
"supertack_plate_temp_initial_layer": [
"45"
],
"temperature_vitrification": [
"45"
],
"textured_plate_temp": [
"65"
],
"textured_plate_temp_initial_layer": [
"65"
],
"version": "1.10.0.32"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PLA Pro.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PLA Pro",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PLA @System",
"filament_type": [
"PLA"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"35"
],
"cool_plate_temp_initial_layer": [
"35"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"0"
],
"eng_plate_temp_initial_layer": [
"0"
],
"fan_cooling_layer_time": [
"80"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.26"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"1"
],
"filament_max_volumetric_speed": [
"21"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"18"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PLA Pro @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"230"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"45"
],
"supertack_plate_temp_initial_layer": [
"45"
],
"temperature_vitrification": [
"45"
],
"textured_plate_temp": [
"65"
],
"textured_plate_temp_initial_layer": [
"65"
],
"version": "1.10.0.27"
}

215
resources/profiles/BBL/filament/Kingroon/KINGROON PLA Silk.json Normal file
View file

@ -0,0 +1,215 @@
{
"type": "filament",
"name": "KINGROON PLA Silk",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic PLA @System",
"filament_type": [
"PLA"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"35"
],
"cool_plate_temp_initial_layer": [
"35"
],
"default_filament_colour": [
""
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"0"
],
"eng_plate_temp_initial_layer": [
"0"
],
"fan_cooling_layer_time": [
"80"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"60"
],
"filament_cost": [
"24.99"
],
"filament_density": [
"1.26"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \nM106 P3 S0\n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"1"
],
"filament_max_volumetric_speed": [
"21"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"18"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON PLA Silk @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"65"
],
"hot_plate_temp_initial_layer": [
"65"
],
"is_custom_defined": "0",
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"240"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"6"
],
"slow_down_min_speed": [
"20"
],
"supertack_plate_temp": [
"45"
],
"supertack_plate_temp_initial_layer": [
"45"
],
"temperature_vitrification": [
"45"
],
"textured_plate_temp": [
"65"
],
"textured_plate_temp_initial_layer": [
"65"
],
"version": "1.10.0.27"
}

277
resources/profiles/BBL/filament/Kingroon/KINGROON TPU 95A.json Normal file
View file

@ -0,0 +1,277 @@
{
"type": "filament",
"name": "KINGROON TPU 95A",
"from": "system",
"instantiation": "true",
"filament_vendor": "Kingroon",
"inherits": "Generic TPU @System",
"filament_type": [
"TPU"
],
"activate_air_filtration": [
"0"
],
"additional_cooling_fan_speed": [
"70"
],
"chamber_temperatures": [
"0"
],
"circle_compensation_speed": [
"200"
],
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Bambu Lab A1 0.4 nozzle"
],
"compatible_prints": [],
"complete_print_exhaust_fan_speed": [
"70"
],
"cool_plate_temp": [
"30"
],
"cool_plate_temp_initial_layer": [
"30"
],
"counter_coef_1": [
"0"
],
"counter_coef_2": [
"0.008"
],
"counter_coef_3": [
"-0.041"
],
"counter_limit_max": [
"0.033"
],
"counter_limit_min": [
"-0.035"
],
"default_filament_colour": [
""
],
"diameter_limit": [
"50"
],
"during_print_exhaust_fan_speed": [
"70"
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"30"
],
"eng_plate_temp_initial_layer": [
"30"
],
"fan_cooling_layer_time": [
"100"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"filament_adhesiveness_category": [
"600"
],
"filament_change_length": [
"10"
],
"filament_cost": [
"20"
],
"filament_density": [
"1.24"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n\n"
],
"filament_extruder_variant": [
"Direct Drive Standard"
],
"filament_flow_ratio": [
"1.05"
],
"filament_is_support": [
"0"
],
"filament_long_retractions_when_cut": [
"nil"
],
"filament_max_volumetric_speed": [
"3.2"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_pre_cooling_temperature": [
"0"
],
"filament_prime_volume": [
"45"
],
"filament_ramming_travel_time": [
"0"
],
"filament_ramming_volumetric_speed": [
"-1"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_distances_when_cut": [
"nil"
],
"filament_retraction_length": [
"0.4"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_scarf_gap": [
"0%"
],
"filament_scarf_height": [
"10%"
],
"filament_scarf_length": [
"10"
],
"filament_scarf_seam_type": [
"none"
],
"filament_settings_id": [
"KINGROON TPU 95A @Bambu Lab A1 0.4 nozzle"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hole_coef_1": [
"0"
],
"hole_coef_2": [
"-0.008"
],
"hole_coef_3": [
"0.23415"
],
"hole_limit_max": [
"0.22"
],
"hole_limit_min": [
"0.088"
],
"hot_plate_temp": [
"45"
],
"hot_plate_temp_initial_layer": [
"45"
],
"impact_strength_z": [
"10"
],
"nozzle_temperature": [
"240"
],
"nozzle_temperature_initial_layer": [
"240"
],
"nozzle_temperature_range_high": [
"250"
],
"nozzle_temperature_range_low": [
"200"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"95%"
],
"overhang_threshold_participating_cooling": [
"95%"
],
"pre_start_fan_time": [
"0"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"3"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"8"
],
"slow_down_min_speed": [
"10"
],
"supertack_plate_temp": [
"0"
],
"supertack_plate_temp_initial_layer": [
"0"
],
"temperature_vitrification": [
"30"
],
"textured_plate_temp": [
"45"
],
"textured_plate_temp_initial_layer": [
"45"
],
"version": "2.0.0.91"
}

25
resources/profiles/BBL/filament/Kingroon/vendor.json Normal file
View file

@ -0,0 +1,25 @@
{
"name": "Kingroon",
"id": "Kingroon",
"config_version": "1.0.0",
"config_update_url": "https://kingroon.com/profiles/",
"description": "Kingroon 3D Printing Materials",
"website": "https://kingroon.com",
"models": {},
"default_filaments": [
"KINGROON ABS Basic",
"KINGROON PETG Basic",
"KINGROON PETG-CF Basic"
],
"filaments": [
"KINGROON ABS Basic",
"KINGROON PETG Basic",
"KINGROON PETG-CF Basic",
"KINGROON PLA + Basic",
"KINGROON PLA Basic",
"KINGROON PLA Matte",
"KINGROON PLA Pro",
"KINGROON PLA Silk",
"KINGROON TPU 95A"
]
}