diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json
index 310280efe7..b8afa1581c 100644
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -1,6 +1,6 @@
 {
     "name": "OrcaFilamentLibrary",
-    "version": "02.03.00.01",
+    "version": "02.03.00.02",
     "force_update": "0",
     "description": "Orca Filament Library",
     "filament_list": [
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json
index abad651a30..0ac52e44e1 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json	
@@ -9,7 +9,7 @@
         "0"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json
index 334bbaef19..c9574f11ca 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json	
@@ -24,7 +24,7 @@
         "10"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json
index 40db0e39b9..9d9470c632 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json	
@@ -11,8 +11,5 @@
     "slow_down_layer_time": [
         "8"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json
index 33969ec6f6..4be0932463 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json	
@@ -14,8 +14,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json
index 8ad3db841c..886163caef 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json	
@@ -14,8 +14,5 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json
index 36abbbe334..dc636ffa2e 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json	
@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json
index 89cbf33daa..acc74e908e 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json	
@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json
index e414955324..9be06a0bc5 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json	
@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json
index 94c2758601..901e0f92fe 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json	
@@ -14,8 +14,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json
index aef30ac87d..7dfed3fb37 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json	
@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json
index c8c860b0e6..9c6d2683d1 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSA05_01",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json
index 2f5f989f72..f36edd97cf 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json	
@@ -11,8 +11,5 @@
     "supertack_plate_temp_initial_layer": [
         "35"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json
index bad029a7b0..6f7ad621fa 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSA08_00",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json
index b819c792d9..cc54b6f75b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json	
@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json
index 55bd4e8867..e8322bd5e7 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json	
@@ -20,8 +20,5 @@
     "nozzle_temperature_initial_layer": [
         "230"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json
index c9b41a937c..b5ff0b42a8 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json	
@@ -15,8 +15,5 @@
     "slow_down_layer_time": [
         "4"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json
index 06772e2e25..c0fa43dee7 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSL05_00",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json
index b76012a175..cdaf7e668b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSL04_05",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json
index c54e0d7ebd..701883fca7 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json	
@@ -72,7 +72,7 @@
         "5"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "147"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json
index 6840342767..03c777e73a 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json	
@@ -60,7 +60,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "76"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json
index 6f31483a4e..e039bd5c93 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json	
@@ -66,7 +66,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
         "70"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json
index d93701f41d..f0100311cb 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json	
@@ -48,7 +48,7 @@
         "12"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
         "70"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json
index 921e9c6836..b779aeb6ef 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json	
@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "15"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json
index 620d2bf9d6..c178dd79ac 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json	
@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json
index 022dc2a4fc..5448265560 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json	
@@ -16,8 +16,5 @@
     ],
     "filament_vendor": [
         "SUNLU"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json
index 96c00c90a8..9d2724491a 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json	
@@ -77,8 +77,5 @@
     ],
     "temperature_vitrification": [
         "68"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json
index 13de726d74..db115c3129 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS02",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json
index 1f442c7e89..a79b7b65c0 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json	
@@ -46,8 +46,5 @@
     ],
     "nozzle_temperature_range_low": [
         "205"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json
index 751fba4f8a..82bc7ae4b3 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS04",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json
index d45ca8564d..eddb7e97f5 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
@@ -40,8 +40,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json
index 57892f2d5d..e341ff4f0e 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS03",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json
index b9d49d1537..e7efac83be 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json	
@@ -40,8 +40,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json
index e65c0bd867..1d3510054d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json	
@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS05",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json
index f611a8e70e..5b8fd61e35 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json	
@@ -47,8 +47,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json
index 695fa97f08..65af44e85b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json	
+++ b/resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json	
@@ -49,8 +49,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
index 631ef58793..e5db0dbc5b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -20,10 +20,10 @@
         "0"
     ],
     "eng_plate_temp": [
-        "90"
+        "100"
     ],
     "eng_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "fan_cooling_layer_time": [
         "30"
@@ -47,10 +47,10 @@
         "ABS"
     ],
     "hot_plate_temp": [
-        "90"
+        "100"
     ],
     "hot_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "nozzle_temperature": [
         "260"
@@ -77,15 +77,18 @@
         "3"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
-        "90"
+        "100"
     ],
     "textured_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "filament_flow_ratio": [
         "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
index 33fc272352..fd8ea36e3e 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -20,10 +20,10 @@
         "0"
     ],
     "eng_plate_temp": [
-        "90"
+        "100"
     ],
     "eng_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "fan_cooling_layer_time": [
         "35"
@@ -47,10 +47,10 @@
         "ASA"
     ],
     "hot_plate_temp": [
-        "90"
+        "100"
     ],
     "hot_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "nozzle_temperature": [
         "260"
@@ -77,15 +77,18 @@
         "3"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
-        "90"
+        "100"
     ],
     "textured_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "filament_flow_ratio": [
         "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
index 4f288a5438..1e2a27596f 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
@@ -75,7 +75,7 @@
         "0"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
index 1e7a813c4b..70862e97ab 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
@@ -177,11 +177,11 @@
     "textured_plate_temp_initial_layer": [
         "60"
     ],
-    "compatible_printers": [],
     "filament_start_gcode": [
-        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+        "; Filament gcode\n"
     ],
     "filament_end_gcode": [
-        "; filament end gcode \nM106 P3 S0\n"
-    ]
+        "; filament end gcode\n"
+    ],
+    "compatible_printers": []
 }
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
index de7bf0c476..ce42a7aa9b 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
@@ -75,7 +75,7 @@
         "270"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "slow_down_layer_time": [
         "6"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
index 28b2974070..3c7c03a4a9 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
@@ -6,7 +6,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -75,7 +75,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "108"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
index 4bbd930e0e..ba79aff70d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
@@ -72,7 +72,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "120"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
index 2e53506d3a..d15ac9a773 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
index 82a8a3e6eb..35d3c9abe0 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "120"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
index 5beeff28eb..45e21a49f3 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
@@ -72,7 +72,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
index 1d8aaddb5d..bd6701b87e 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "110"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
index fa7478d1e2..19409eabf4 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
@@ -6,7 +6,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -81,7 +81,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "210"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
index af59b81dfa..69ce757d9d 100644
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
@@ -72,7 +72,7 @@
         "250"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "slow_down_layer_time": [
         "4"
diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp
index 163a53badd..eef634385f 100644
--- a/src/slic3r/GUI/ConfigManipulation.cpp
+++ b/src/slic3r/GUI/ConfigManipulation.cpp
@@ -498,7 +498,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
     toggle_field("enable_arc_fitting", !have_volumetric_extrusion_rate_slope);
     toggle_line("max_volumetric_extrusion_rate_slope_segment_length", have_volumetric_extrusion_rate_slope);
     toggle_line("extrusion_rate_smoothing_external_perimeter_only", have_volumetric_extrusion_rate_slope);
-    if(have_volumetric_extrusion_rate_slope) config->set_key_value("enable_arc_fitting", new ConfigOptionBool(false));
+    if(have_volumetric_extrusion_rate_slope) config->set_key_value("enable_arc_fitting", new ConfigOptionBool(false)); 
     if(have_volumetric_extrusion_rate_slope_segment_length < 0.5) {
         DynamicPrintConfig new_conf = *config;
         new_conf.set_key_value("max_volumetric_extrusion_rate_slope_segment_length", new ConfigOptionFloat(1));