ENH: add Generic HIPS

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0fd861db6137c39f59630ae443661ddeb7a7b060

src/libslic3r/GCode.cpp

@@ -3490,7 +3490,7 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
     // if polyline was shorter than the clipping distance we'd get a null polyline, so
     // we discard it in that case
     double clip_length = m_enable_loop_clipping ?
-        scale_(EXTRUDER_CONFIG(nozzle_diameter)) * m_config.seam_gap.value :
+        scale_(EXTRUDER_CONFIG(nozzle_diameter)) * ( m_config.seam_gap.value / 100 ) :
         0;
 
     // get paths

src/libslic3r/Print.cpp

@@ -885,7 +885,8 @@ static std::map<std::string, bool> filament_is_high_temp {
         {"PA-CF",   true},
         {"PET-CF",  true},
         {"PC",      true},
-        {"ASA",     true}
+        {"ASA",     true},
+        {"HIPS",    true}
 };
 
 //BBS: this function is used to check whether multi filament can be printed

src/libslic3r/PrintConfig.cpp

@@ -1031,7 +1031,7 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipRectilinear));
 
     def                = this->add("internal_solid_infill_pattern", coEnum);
-    def->label         = L("Internal solid infill Pattern");
+    def->label         = L("Internal solid infill pattern");
     def->category      = L("Strength");
     def->tooltip       = L("Line pattern of internal solid infill. if the detect nattow internal solid infill be enabled, the concentric pattern will be used for the small area.");
     def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
@@ -1293,6 +1293,7 @@ void PrintConfigDef::init_fff_params()
     def->enum_values.push_back("PET-CF");
     def->enum_values.push_back("PETG-CF");
     def->enum_values.push_back("PVA");
+    def->enum_values.push_back("HIPS");
     def->mode = comSimple;
     def->set_default_value(new ConfigOptionStrings { "PLA" });
 
@@ -2475,13 +2476,13 @@ void PrintConfigDef::init_fff_params()
     def->mode = comSimple;
     def->set_default_value(new ConfigOptionEnum<SeamPosition>(spAligned));
 
-    def = this->add("seam_gap", coFloat);
+    def = this->add("seam_gap", coPercent);
     def->label = L("Seam gap");
-    def->tooltip = L("In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 0.15");
-    def->sidetext = L("mm");
+    def->tooltip = L("In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount as a percentage of the current extruder diameter. The default value for this parameter is 15");
+    def->sidetext = L("%");
     def->min = 0;
     def->mode = comDevelop;
-    def->set_default_value(new ConfigOptionFloat(0.15));
+    def->set_default_value(new ConfigOptionPercent(15));
 
     def = this->add("wipe_speed", coPercent);
     def->label = L("Wipe speed");

src/libslic3r/PrintConfig.hpp

@@ -701,7 +701,7 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionBool,               only_one_wall_top))
     ((ConfigOptionBool,               only_one_wall_first_layer))
     // OrcaSlicer
-    ((ConfigOptionFloat,              seam_gap))
+    ((ConfigOptionPercent,            seam_gap))
     ((ConfigOptionPercent,            wipe_speed))
 )